Hp Compaq Dx2710 Mt Users Manual 483941 001

2015-02-09

• Contents
• Installing the Operating System
  • 1.1 Microsoft Windows XP/Windows Vista/ Redflag Linux
  • 1.2 Converting to NTFS (Associated with Windows OS)
  • 1.3 HP Software
• Setup Utilities and Diagnostics Features
  • 2.1 Power-On Self-Test (POST)
  • 2.2 Computer Setup Utilities
  • 2.3 Recovering the Configuration Settings
• Desktop Management
  • 3.1 Initial Configuration and Deployment
  • 3.2 ROM Flash
  • 3.3 Security
• Serial ATA Drive Guidelines and Features
  • 4.1 SATA 3.0 Hard Drives
  • 4.2 SATA Hard Drive Cables
  • 4.3 SATA SMART Drives
  • 4.4 Drive Capacities
  • 4.5 SATA BIOS
• Identifying the Chassis, Routine Care, and Disassembly Preparation
  • 5.1 Chassis Designations
  • 5.2 Electrostatic Discharge Information
  • 5.3 Routine Care
  • 5.4 Service Considerations
• Removal and Replacement Procedures- Microtower (MT)/Small Form Factor (SFF) Chassis
  • 6.1 Preparation for Disassembly
  • 6.2 Remove the computer access panel and front bezel (MT chassis and SFF chassis)
  • 6.3 Using the Small Form Factor Computer in a Minitower Configuration
  • 6.4 Front Drive Bezels
  • 6.5 Memory
  • 6.6 Expansion Cards
  • 6.7 Cable Management
  • 6.8 Drives
  • 6.9 Front I/O Panel Housing Assembly - MT chassis
  • 6.10 System Fan
  • 6.11 Heatsink - MT chassis
  • 6.12 Processor
  • 6.13 System Board
  • 6.14 Battery
  • 6.15 Power Supply
• Connector Pin Assignments
• Power Cord Set Requirements
• POST Error Messages
• Troubleshooting Without Diagnostics
• Memory