Hp Photosmart D110 Users Manual

Hp-Photosmart-E-All-In-One-Printer-D110A-Reference-Guide-140884 hp-photosmart-e-all-in-one-printer-d110a-reference-guide-140884

D1110 Series c02106073

D110 to the manual c0535e64-727a-4e4c-b763-e4c9d04476a2

If not then save HP Photosmart D110a Printer Reference Guide

2015-02-09

: Hp Hp-Hp-Photosmart-D110-Users-Manual-545162 hp-hp-photosmart-d110-users-manual-545162 hp pdf

Open the PDF directly: View PDF PDF.
Page Count: 8

Scroll down to view the document on your mobile browser.
© 2009 Hewlett-Packard Development Company, L.P.Printed in [English] *CN731-90029**CN731-90029*CN731-900294132Important!  Do not connect the USB cable until prompted by the software!Unpack printer. Remove all tape, protective film, and packing materialFollow the Setup WizardConnect and power onConnect the power cord and adapter. Press   to turn on the HP Photosmart.Be sure to follow the instructions on the display as it guides you through setting up and connecting the HP Photosmart.For computers without a CD/DVD drive, go towww.hp.com/support to download and install the software.Verify box contentsWiFi Protected Setup (WPS)  * Not included with all modelsRegister your HP Photosmart Get quicker service and support alerts by registering at www.register.hp.com.HP Photosmart D110 seriesStart setup here...Inside...Setup troubleshooting  2Get to know your HP Photosmart  3Print, copy, scan features and tips  4What’s new? Web Services  5Networked printer setup and use  6This HP Photosmart supports WiFi Protected Setup (WPS)   for easy one-button wireless setup.• During the setup, if you are prompted on the display for WPS, and you have a WPS router, press the WPS button on the router. The wireless LED on the printer will turn on if the connection is successful. • Otherwise, follow the setup wizard on the printer display. Also, see inside this guide for details. English
2Setup troubleshootingIf the HP Photosmart doesn’t turn on...1.  Check the power cord.• Make sure the power cord is rmly connected to both the printer and the power adaptor. An LED on the power supply will be lit if the power cord is working.• If you are using a power strip, check that the power strip is turned on. Or, plug the printer directly into a power outlet.• Test the power outlet to make sure that is working. Plug in another appliance that you know works, and see if it has power. If not, there may be a problem with the power outlet.• If you plugged the printer into a switched outlet,  check that the outlet is turned on. 2.  Turn off the printer, and then unplug the power cord. Plug the power cord back in, and then press the   button to turn on the printer. 3.  Take care not to press the   button too quickly. Press it only once. It might take a few minutes for the printer to turn on, so if you press the   button more than once, you might be turning off the printer.4.  If you have completed all the above steps, but are still having a problem, contact HP support for service. Go to www.hp.com/support.If you are unable to print... Make sure that your HP Photosmart is set as the default printer. To do this:• On the Windows taskbar, click Start.• Then click Control Panel.• Then open: • Devices and Printers (Windows 7)• Printers (Vista)• Printers and Faxes (XP)Look for your printer to see if it has a check mark in a circle next to it. If not, right-click the printer icon and choose “Set as default printer” from the menu.If you still can’t print, or if the Windows software installation failed:1.  Remove the CD from your computer’s CD drive, and then disconnect the printer from the computer.2.  Restart the computer.3.  Temporarily disable any software rewall and close any anti-virus software. 4.  Insert the printer software CD into the computer CD drive, then follow the onscreen instructions to install the printer software. Do not connect the USB cable until you are told to do so.5.  After the installation nishes, restart the computer and any security software you disabled or closed.If you are unable to print, uninstall and reinstall the software.The uninstaller removes all the HP software components that are specific to this HP Photosmart. It does not remove any components that are shared by other printers or programs. To uninstall the software:1.  Disconnect the printer from your computer.2.  Open the Applications: Hewlett-Packard folder.3.  Double-click HP Uninstaller. Follow the onscreen instructions.To install the software:1.  Insert the CD into your computer’s CD drive.2.  On the desktop, open the CD, then  double-click HP Installer. 3.  Follow the onscreen instructions.MacWindowsEnglish

Navigation menu