Hp Laserjet 3200 Users Manual UG
3200m to the manual f54e3f50-c324-4eb2-ae8f-45fc4eba5f95
2015-02-09
: Hp Hp-Laserjet-3200-Users-Manual-545194 hp-laserjet-3200-users-manual-545194 hp pdf
Open the PDF directly: View PDF
Page Count: 288 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- 1 About This Guide
- 2 Getting to Know the Product
- 3 Managing General Default Settings, Logs, and Reports
- Introduction
- Changing general default settings
- Managing logs and reports
- Printing the fax activity log
- Setting the fax activity log to print automatically
- Printing a fax call report
- Setting when the fax call report prints
- Including the first page of each fax on the fax call report
- Printing a one-touch, speed-dial, and group- dial report
- Printing the control panel menu structure
- Printing a configuration report
- Printing the block fax list
- Printing a PCL font list
- Printing a PostScript font list
- Printing all fax reports
- Printing a T.30 protocol trace report
- Setting when the T.30 protocol trace report prints
- 4 Faxing
- Introduction
- Sending faxes
- Sending faxes to one recipient
- Quickly programming speed-dial codes or one-touch keys
- Sending faxes to multiple recipients
- Sending a fax at a future time
- Redialing manually
- Using the Contrast button to adjust the contrast for the current fax or copy job
- Adjusting the resolution for the current job
- Canceling the current fax job
- Canceling a fax job using Fax Job Status
- Receiving faxes
- Advanced send fax features and settings
- About speed-dial codes, one-touch keys, and group-dial codes
- Programming speed-dial codes and one- touch keys
- Programming a one-touch key for alternate long distance
- Programming group-dial codes
- Deleting all speed-dial codes, one-touch keys, and group-dials codes
- Using Manual Dial
- Sending a fax by dialing from a telephone
- Inserting a pause or wait into a fax number
- Using dialing characters
- Changing the information in the fax header
- Changing the default contrast and resolution for outgoing faxes
- Selecting tone- or pulse-dialing mode
- Changing how the product redials
- Inserting a dial prefix
- Changing the detect dial tone setting
- Advanced receive fax features and settings
- Using fax forwarding
- Requesting a fax from another fax machine (polling)
- Clearing faxes from memory
- Changing how the product answers incoming faxes
- Changing answer ring patterns
- Enabling an extension phone
- Changing the silence-detect mode
- Changing autoreduction for incoming faxes
- Enabling stamp received faxes
- Setting error correction
- Faxing using the software
- 5 Printing
- 6 Copying
- 7 Scanning
- 8 Problem Solving and Product Maintenance
- Introduction
- General troubleshooting checklist
- Resolving fax problems
- Resolving printing problems
- Resolving copying problems
- Resolving scanning problems
- Resolving paper feed problems
- Resolving image quality problems
- Resolving control panel error messages
- Common Macintosh problems
- Restoring the factory defaults
- Uninstalling the software
- Product Maintenance
- A Specifications
- Introduction
- Product specifications
- Paper specifications
- Transportation
- Laser safety statement
- FCC regulations
- FCC part 68 requirements
- Telephone consumer protection act (U.S.)
- IC CS-03 requirements
- Regulatory information for European Union countries
- New Zealand Telecom Regulatory Notices
- Declaration of conformity
- Canadian DOC regulations
- Environmental product stewardship program
- Material safety data sheet
- Battery Specifications
- B Service and Support Information
- Glossary
- Index