Hp Officejet 7310 All In One Printer Setup Poster Q3461 90206_en(US)
Setup Poster c00236206
If not then c00236206 Manual: ://h10032.www1.hp.com/ctg/Manual/c00236206
2015-01-05
: Hp Hp-Officejet-7310-All-In-One-Printer-Setup-Poster-140468 hp-officejet-7310-all-in-one-printer-setup-poster-140468 hp pdf
Open the PDF directly: View PDF 
.
Page Count: 12
2
3
1
© 2004 Hewlett-Packard
Development Company, L.P.
Title in HP Futura Book
14-20 pt., centered
Subtitle in 10-14 pt., centered, white
English
Arabic
Bahasa
Português
Hrvatski
Cesky
Dansk
Nederland
Suomi
Français
Deutsch
Greek
Hangul
Hebrew
Magyar
Italiano
Español
Magyar
Italiano
Japanese
Español
Norsk
Português
Russian
Simplified
Chinese
Slovencina
Slovenšcina
Español
Svenska
Traditional-
Chinese
Thai
Türkçe
Ukrainian
© 2004 Hewlett-Packard
Development Company, L.P.
Title in HP Futura Book
14-20 pt., centered
Subtitle in 10-14 pt., centered, white
English
Arabic
Bahasa
Português
Hrvatski
Cesky
Dansk
Nederland
Suomi
Français
Deutsch
Greek
Hangul
Hebrew
Magyar
Italiano
Español
Magyar
Italiano
Japanese
Español
Norsk
Português
Russian
Simplified
Chinese
Slovencina
Slovenšcina
Español
Svenska
Traditional-
Chinese
Thai
Türkçe
Ukrainian
Horizontal cover image:
Replace this guideline area
with either a cropped product
photograph or a straight-on
front-view illustration
HP Photosmart 2600/2700 series all-in-one
User Guide
HP Photosmart 2600/2700 series all-in-one
User Guide
Horizontal cover image:
Replace this guideline area
with either a cropped product
photograph or a straight-on
front-view illustration
HP Photosmart 2600/2700 series all-in-one
User Guide
HP Photosmart 2600/2700 series all-in-one
User Guide
Horizontal cover image:
Replace this guideline area
with either a cropped product
photograph or a straight-on
front-view illustration
HP Photosmart 2600/2700 series all-in-one
User Guide
HP Photosmart 2600/2700 series all-in-one
User Guide
Start Here
USB cable users: Do not connect the USB cable until this guide
instructs you to or the software may not install properly.
Remove all tape
Locate components
Windows CD
Macintosh CD
User Guide, Network
Guide, Accessories Guide
print cartridges
power cord and
adapter
control-panel overlay (may be attached)
USB cable*
HP Offi cejet 7300 series all-in-one Setup Guide
* Purchased separately.
The contents of your box may
differ.
Additional equipment needed for
network setup is specifi ed later in
this guide.
Use this guide to set up the hardware and connect the HP all-in-one to either your computer or network. If you
have problems during setup, see Troubleshooting in the last section.
Ethernet cable
(wider end)
phone cord
two-sided printing
accessory
document feeder
tray
2 • HP all-in-one
4
5
6
a b d c
The control-panel overlay must be attached for the HP all-in-one to work!
Attach the control-panel overlay (if not attached)
Load plain white paper
Attach accessories
a Align the tabs on the edge of the document
feeder tray with the slots on the top of the device.
Slide the tray until it locks into place.
a Position the control-panel
overlay above the device.
b Press down fi rmly on all
edges and in the center
of the overlay to secure it.
b Insert the two-sided printing accessory into the
back of the device until it snaps into place.
3 • HP all-in-one
7
8
9
Connect the supplied phone cord
Connect one end of the supplied phone cord to the
phone port on the left (1-LINE) and the other to a wall
jack.
To connect an answering machine or use a different
phone cord, see the User Guide.
Press the On button
a After you press the On button, the green light fl ashes, and then becomes
solid. This may take up to a minute.
b Wait for the print cartridge prompt before continuing.
On
Connect the power cord and adapter
USB cable users: Do not connect the
USB cable until this guide instructs you to
or the software may not install properly.
4 • HP all-in-one
10
11
12
Open access door
a Hold the tri-color print cartridge with the
HP label facing up.
b Place the tri-color print cartridge in front of
the left slot.
c Push the cartridge fi rmly into the slot until it
stops.
Insert the tri-color print cartridge
Make sure the device is ON before
continuing.
a Lift the access door.
b Press down and lift up
the green and black
latches on the inside of
the HP all-in-one.
Remove tape from both cartridges
Pull the pink tab to remove the tape from both
print cartridges.
Do not touch the
copper-colored
contacts or retape the
cartridges.
5 • HP all-in-one
13
14
15
Align the print cartridges
Turn on your computer
a Turn on your computer, login if necessary, and then wait for the
desktop to appear.
b Close any open programs.
a Hold the black print cartridge with the
HP label facing up.
b Place the black print cartridge in front of the
right slot.
c Push the cartridge fi rmly into the slot until it
stops.
d Push the latches down to close, and then close
the access door.
Insert the black print cartridge
a Press OK at each of the prompts on the control panel to start print
cartridge alignment.
The alignment may take a few minutes.
b After the page prints, alignment is complete. Check the color
graphics display on the HP all-in-one for the status, and then press
OK .
Recycle or discard the alignment page.
The print cartridges may not be the same size.
6 • HP all-in-one
16
If you are not connecting the device to a computer or network, continue to the Fax Setup chapter in the
User Guide.
Use this connection type if you want to connect the device
directly to one computer. (Do not connect until the
software instructs you to.)
Equipment needed: USB cable.
For a USB connection, go to Section A for instructions.
Use this connection type if you want an Ethernet cable
connection between the device and your network.
Equipment needed: hub/router/switch and Ethernet cable.
For an Ethernet cable connection, go to Section B for
instructions.
A: USB Connection
B: Ethernet (Wired) Network
Choose ONE connection type (A or B)
A1 Insert the correct CD
Windows Users: Macintosh Users:
a Insert the HP all-in-one Windows CD.
b Follow the onscreen instructions.
c On the Connection Type screen, make sure to
select directly to this computer . Continue to
the next page.
Insert the HP all-in-one Macintosh CD. Go to
the next page before installing the software.
If the startup screen does not appear, double-click
My Computer , double-click the CD-ROM icon,
and then double-click setup.exe .
Section A: USB connection
7 • HP all-in-one
A2
A3 Go to step 17 on page 11.
8 • HP all-in-one
If you do not see the
screens shown, see
Troubleshooting in
the last section.
b Follow the onscreen instructions to complete
the Fax Setup Wizard and Sign up now
screens.
b Double-click the HP All-in-One Installer
icon.
c Make sure you complete all screens, including
the Setup Assistant. You must select USB . Also,
you must click the Print Center button to add
the HP all-in-one to your printer list.
Connect the USB cable
Macintosh Users:
Windows Users:
a Connect the USB cable to the port on the
back of the HP all-in-one, and then to any
USB port on your computer.
a You may have to wait several minutes before you
see the onscreen prompt to connect the USB cable.
Once the prompt appears, connect the USB cable
to the port on the back of the HP all-in-one, and
then to any USB port on your computer.
B1
9 • HP all-in-one
a Remove the yellow plug from the back of the device.
b Connect one end of the Ethernet cable to the Ethernet port on
the back of the device.
c Connect the other end of the Ethernet cable to the hub/router/
switch. If the cable is not long enough, you can purchase a
longer cable.
Important: Do not connect the Ethernet cable to a cable
modem. You must have a working network. If you already
connected the USB cable, do not connect the Ethernet cable.
Connect the Ethernet cable
c
b
a
Section B: Ethernet (Wired) Network
B2
10 • HP all-in-one
Choose the correct CD
Windows Users: Macintosh Users:
a Insert the HP all-in-one Macintosh CD.
b Double-click the HP All-in-One Installer
icon.
a Insert the HP all-in-one Windows CD.
b Follow the onscreen instructions.
c On the Connection Type screen, make sure
to select through the network . Follow the
onscreen instructions.
d You must accept both fi rewall messages or setup
will fail.
If the startup screen does not appear, double-click
My Computer , double-click the CD-ROM icon,
and then double-click setup.exe .
c Make sure you complete all screens, including
the Setup Assistant. You must select TCP/IP .
Also, you must click the Print Center button
to add the HP all-in-one to your printer list.
11 • HP all-in-one
18
17
Horizontal cover image:
Replace this guideline area
with either a cropped product
photograph or a straight-on
front-view illustration
HP Photosmart 2600/2700 series all-in-one
User Guide
HP Photosmart 2600/2700 series all-in-one
User Guide
Set up additional computers (optional)
Congratulations
When you see the Congratulations! screen, you are
ready to use your HP all-in-one. See the User Guide or
onscreen help to get started.
If you have additional computers on your network, go to
the next step.
If you have additional computers on your network, then install the
HP all-in-one software on each computer.
Follow the onscreen instructions. Make sure that you choose the
connection type between the network and your HP all-in-one (not
between your computer and the network).
To prevent paper from
fl ying out of the output
tray, pull and then fl ip the
paper tray extender out.
Problem: The Remove and check print cartridges message appears after
you insert print cartridges.
Action: Remove print cartridges. Make sure you remove all tape from copper
contacts. Close the access door.
Problem: You did not see the screen prompting you to connect the USB cable.
Action: Remove, and then re-insert the HP all-in-one Windows CD. Refer to
Section A.
Problem: The Microsoft Add Hardware screen appears.
Action: Click Cancel . Unplug the USB cable, and then insert the HP all-in-one
Windows CD. Refer to Section A.
Problem: The Device Setup Has Failed To Complete screen appears.
Action: Verify that the control-panel overlay is fi rmly attached. Unplug the
HP all-in-one and plug it in again. Check all connections. Make sure the USB cable
is plugged into the computer. Do not plug the USB cable into a keyboard or non-
powered hub. Refer to Section A.
Problem: The Macintosh software does not install.
Action: Make sure the USB cable is plugged into the computer before installing
the software. Do not plug the USB cable into a keyboard or non-powered hub. Refer
to Section A. For network software problems, see the Network Guide.
Refer to the User Guide for more information. Printed on recycled paper.
Visit www.hp.com/support for assistance.
Troubleshooting
Problem: The paper has jammed.
Action: Turn off the device, and then remove the two-sided printing accessory.
Gently pull out any paper. Re-insert the printing accessory. Turn the device on. Load
the paper again.
*Q3461-90206*
Q3461-90206
*Q3461-90206*
© Copyright 2004 Hewlett-Packard Development Company, L.P. Printed in country [].
