Hp Officejet Pro 8615 E All In One Printer Users Manual 8610 User Guide – ENWW
2015-01-05
: Hp Hp-Officejet-Pro-8615-E-All-In-One-Printer-Users-Manual-140598 hp-officejet-pro-8615-e-all-in-one-printer-users-manual-140598 hp pdf
Open the PDF directly: View PDF .
Page Count: 268
Download | |
Open PDF In Browser | View PDF |
HP Officejet Pro 8610 e-All-in-One/HP Officejet Pro 8620 e-All-in-One/HP Officejet Pro 8630 e-All-in-One User Guide Copyright information Hewlett-Packard Company notices Acknowledgements © 2014 Copyright Hewlett-Packard Development Company, L.P. The information contained in this document is subject to change without notice. Edition 1, 4/2014 All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. Microsoft, Windows, Windows XP, Windows Vista, Windows 7, and Windows 8 are U.S. registered trademarks of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Safety information Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. 1. Read and understand all instructions in the documentation that comes with the printer. 2. Observe all warnings and instructions marked on the product. 3. Unplug this product from wall outlets before cleaning. 4. Do not install or use this product near water, or when you are wet. 5. Install the product securely on a stable surface. 6. Install the product in a protected location where no one can step on or trip over the line cord, and the line cord cannot be damaged. 7. If the product does not operate normally, see Solve a problem on page 121. 8. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Table of contents 1 How do I? .......................................................................................................................................................... 1 2 Get started ........................................................................................................................................................ 3 Accessibility .......................................................................................................................................... 4 HP EcoSolutions (HP and the Environment) ........................................................................................ 5 Manage Power ..................................................................................................................... 5 Optimize Printing Supplies ................................................................................................... 5 Understand the printer parts ................................................................................................................. 7 Front view ............................................................................................................................ 7 Printing supplies area .......................................................................................................... 8 Back view ............................................................................................................................. 8 Use the printer control panel ................................................................................................................ 9 Overview of buttons and lights ............................................................................................. 9 Control panel display icons .................................................................................................. 9 Change printer settings ...................................................................................................... 10 HP Digital Solutions ............................................................................................................................ 12 What are HP Digital Solutions? ......................................................................................... 12 HP Digital Filing ................................................................................................. 12 HP Digital Fax ................................................................................................... 12 Requirements .................................................................................................................... 12 Set up HP Digital Solutions ................................................................................................ 14 Set up HP Digital Filing ..................................................................................... 14 Set up Scan to Network Folder ......................................................... 14 Set up Scan to Email ........................................................................ 15 Set up HP Digital Fax ........................................................................................ 17 Use the HP Digital Solutions .............................................................................................. 18 Use HP Scan to Network Folder ....................................................................... 18 Use Scan to Email ............................................................................................. 18 Use HP Digital Fax ............................................................................................ 18 Near field communication (NFC) ........................................................................................................ 19 Paper basics ....................................................................................................................................... 20 Recommended papers for printing .................................................................................... 20 Order HP paper supplies ................................................................................................... 21 Tips for selecting and using paper ..................................................................................... 22 Load paper ......................................................................................................................................... 23 ENWW v Load standard-size paper .................................................................................................. 23 Load envelopes ................................................................................................................. 24 Load cards and photo paper .............................................................................................. 25 Load an original on the scanner glass ................................................................................................ 27 Load an original in the document feeder ............................................................................................ 28 Insert a USB flash drive ...................................................................................................................... 29 Set up and use accessories ............................................................................................................... 30 Install the automatic two-sided printing accessory (duplexer) ........................................... 30 Install and use second tray (Tray 2) .................................................................................. 30 Work with trays .................................................................................................................. 31 Maintain the printer ............................................................................................................................. 34 Clean the scanner glass .................................................................................................... 34 Clean the exterior .............................................................................................................. 34 Clean the automatic document feeder ............................................................................... 35 Update the printer ............................................................................................................................... 36 Open the HP printer software (Windows) ........................................................................................... 37 Turn the printer off .............................................................................................................................. 38 Restore defaults ................................................................................................................................. 39 3 Print ................................................................................................................................................................. 41 Print documents ................................................................................................................................. 42 Print on envelopes .............................................................................................................................. 43 Print photos ........................................................................................................................................ 45 Print using the maximum dpi .............................................................................................................. 47 Print on both sides (duplexing) ........................................................................................................... 48 Tips for print success ......................................................................................................................... 49 4 Copy and scan ................................................................................................................................................ 53 Copy ................................................................................................................................................... 54 Scan ................................................................................................................................................... 56 Scan an original ................................................................................................................. 56 Scan to a computer ........................................................................................... 56 Scan to a memory device .................................................................................. 57 Scan using Webscan ......................................................................................................... 57 Scanning documents as editable text ................................................................................ 58 5 Fax .................................................................................................................................................................. 61 Send a fax .......................................................................................................................................... 62 Send a standard fax ........................................................................................................... 62 Send a standard fax from the computer ............................................................................ 63 Send a fax manually from a phone .................................................................................... 63 Send a fax using monitor dialing ........................................................................................ 64 Send a fax from memory ................................................................................................... 65 vi ENWW Send a fax to multiple recipients ........................................................................................ 65 Send a fax in Error Correction Mode ................................................................................. 66 Receive a fax ...................................................................................................................................... 67 Receive a fax manually ...................................................................................................... 67 Set up backup fax .............................................................................................................. 68 Reprint received faxes from memory ................................................................................. 68 Forward faxes to another number ...................................................................................... 69 Set the paper size for received faxes ................................................................................ 69 Set automatic reduction for incoming faxes ....................................................................... 70 Block unwanted fax numbers ............................................................................................. 70 Add numbers to the junk fax list ........................................................................ 70 Remove numbers from the junk fax list ............................................................. 71 Print a Junk Fax Report .................................................................................... 71 Receive faxes using HP Digital Fax ................................................................................... 71 HP Digital Fax requirements ............................................................................. 72 Activate HP Digital Fax ..................................................................................... 72 Modify HP Digital Fax settings .......................................................................... 72 Set up speed-dial entries .................................................................................................................... 74 Set up and change speed-dial entries ............................................................................... 74 Set up and change group speed-dial entries ..................................................................... 75 Delete speed-dial entries ................................................................................................... 75 Print a list of speed-dial entries .......................................................................................... 76 Change fax settings ............................................................................................................................ 77 Configure the fax header ................................................................................................... 77 Set the answer mode (Auto answer) ................................................................................. 77 Set the number of rings before answering ......................................................................... 78 Change the answer ring pattern for distinctive ring ........................................................... 78 Set the dial type ................................................................................................................. 79 Set the redial options ......................................................................................................... 79 Set the fax speed ............................................................................................................... 79 Set the fax sound volume .................................................................................................. 80 Fax and digital phone services ........................................................................................................... 81 Fax over Internet Protocol .................................................................................................................. 82 Fax reports ......................................................................................................................................... 83 Print fax confirmation reports ............................................................................................. 83 Print fax error reports ......................................................................................................... 84 Print and view the fax log ................................................................................................... 84 Clear the fax log ................................................................................................................. 84 Print the details of the last fax transaction ......................................................................... 85 Print a Caller ID Report ...................................................................................................... 85 View the Call History .......................................................................................................... 85 6 Web Services .................................................................................................................................................. 87 What are Web Services? .................................................................................................................... 88 ENWW vii HP ePrint ........................................................................................................................... 88 Print apps ........................................................................................................................... 88 Set up Web Services .......................................................................................................................... 89 Set up Web Services using the printer control panel ......................................................... 89 Set up Web Services using the embedded web server ..................................................... 89 Set up Web Services using the HP printer software .......................................................... 90 Use Web Services .............................................................................................................................. 91 HP ePrint ........................................................................................................................... 91 Print using HP ePrint ......................................................................................... 91 Find the printer's email address ........................................................................ 91 Turn off HP ePrint ............................................................................................. 92 Print apps ........................................................................................................................... 92 Use print apps ................................................................................................... 92 Manage print apps ............................................................................................ 92 Turn off print apps ............................................................................................. 92 Remove Web Services ....................................................................................................................... 93 7 Work with ink cartridges .................................................................................................................................. 95 Information on ink cartridges and the printhead ................................................................................. 96 Check the estimated ink levels ........................................................................................................... 97 Printing with black or color ink only .................................................................................................... 98 Replace the ink cartridges .................................................................................................................. 99 Order ink cartridges .......................................................................................................................... 101 Store printing supplies ...................................................................................................................... 102 Anonymous usage information storage ............................................................................................ 103 8 Network setup ............................................................................................................................................... 105 Set up the printer for wireless communication ................................................................................. 106 Before you begin .............................................................................................................. 106 Set up the printer on your wireless network ..................................................................... 106 Change the connection type ............................................................................................ 107 Change from an Ethernet connection to a wireless connection ...................... 107 Change from a USB connection to a wireless connection .............................. 107 Test the wireless connection ........................................................................................... 108 Turn on or off the wireless capability of the printer .......................................................... 108 Change network settings .................................................................................................................. 109 View and print network settings ....................................................................................... 109 Set link speed .................................................................................................................. 109 Change IP settings .......................................................................................................... 109 Change from a wireless connection to a USB or Ethernet connection ............................................. 111 Use HP wireless direct ..................................................................................................................... 112 Turn on HP wireless direct ............................................................................................... 112 Print from a wireless-capable mobile device ................................................................... 113 Print from a wireless-capable computer .......................................................................... 113 viii ENWW 9 Printer management tools ............................................................................................................................. 115 Toolbox (Windows) ........................................................................................................................... 116 Open the Toolbox ............................................................................................................ 116 HP Utility (OS X) ............................................................................................................................... 117 Embedded web server ..................................................................................................................... 118 About cookies .................................................................................................................. 118 Open the embedded web server ..................................................................................... 118 10 Solve a problem .......................................................................................................................................... 121 HP support ....................................................................................................................................... 122 Register printer ................................................................................................................ 122 Support process ............................................................................................................... 122 Obtain electronic support ................................................................................................. 122 HP support by phone ....................................................................................................... 123 Before you call ................................................................................................ 123 Phone support period ...................................................................................... 123 Support phone numbers .................................................................................. 123 After the phone support period ........................................................................ 123 Get help from the printer control panel ............................................................................................. 124 Understand printer reports ............................................................................................................... 125 Printer status report ......................................................................................................... 125 Network configuration page ............................................................................................. 126 Solve printer problems ..................................................................................................................... 129 The printer shuts down unexpectedly .............................................................................. 129 Printhead alignment fails ................................................................................................. 129 Paper-feed problems ....................................................................................................... 129 The printer cannot read the memory device .................................................................... 130 Solve printing problems .................................................................................................................... 131 Solve copy problems ........................................................................................................................ 135 Copies are blank or faded ................................................................................................ 135 Size is reduced ................................................................................................................ 135 Copy quality is poor ......................................................................................................... 135 Solve scan problems ........................................................................................................................ 137 Scanner did nothing ......................................................................................................... 137 Scan takes too long ......................................................................................................... 137 Part of the document did not scan or text is missing ....................................................... 137 Text cannot be edited ...................................................................................................... 138 Scanned image quality is poor ......................................................................................... 139 Unable to scan to network folder ..................................................................................... 139 Unable to scan to email ................................................................................................... 140 Solve fax problems ........................................................................................................................... 141 The fax test failed ............................................................................................................ 141 The "Fax Hardware Test" failed ...................................................................... 141 ENWW ix The "Fax Connected to Active Telephone Wall Jack" test failed .................... 142 The "Phone Cord Connected to Correct Port on Fax" test failed .................... 142 The "Using Correct Type of Phone Cord with Fax" test failed ........................ 143 The "Dial Tone Detection" test failed .............................................................. 144 The "Fax Line Condition" test failed ................................................................ 144 The display always shows Phone Off Hook ..................................................................... 145 The printer is having problems sending and receiving faxes ........................................... 145 The printer cannot receive faxes, but can send faxes ..................................................... 147 The printer cannot send faxes, but can receive faxes ..................................................... 148 Solve HP ePrint and HP Printables problems .................................................................................. 149 Solve network problems ................................................................................................................... 150 General network troubleshooting ..................................................................................... 150 Unable to connect the printer wirelessly .......................................................................... 150 Step 1: Make sure the Wireless (802.11) light is turned on ............................ 150 Step 2: Make sure the computer is connected to the wireless network .......... 151 Step 3: Run the wireless test .......................................................................... 151 Step 4: Restart components of the wireless network ...................................... 152 Solve printer management problems ............................................................................................... 153 Embedded web server cannot be opened ....................................................................... 153 Printhead maintenance .................................................................................................................... 155 Clean the printhead ......................................................................................................... 155 Align the printhead ........................................................................................................... 156 Calibrate the linefeed ....................................................................................................... 157 Reinstall the printhead ..................................................................................................... 157 Clear jams ........................................................................................................................................ 159 Clear paper jams inside the printer .................................................................................. 159 Clear paper jams in the automatic document feeder ....................................................... 160 Avoid paper jams ............................................................................................................. 161 Clear the print carriage ..................................................................................................................... 162 Appendix A Technical information ................................................................................................................... 163 Warranty information ........................................................................................................................ 164 Ink cartridge warranty information ................................................................................... 164 Specifications ................................................................................................................................... 165 System requirements ....................................................................................................... 165 Environmental specifications ........................................................................................... 165 Input tray capacity ............................................................................................................ 165 Output tray capacity ......................................................................................................... 166 Paper size and weights .................................................................................................... 166 Print specifications ........................................................................................................... 166 Copy specifications .......................................................................................................... 166 Scan specifications .......................................................................................................... 166 Fax specifications ............................................................................................................ 167 Cartridge yield .................................................................................................................. 167 x ENWW Acoustic emission specifications ..................................................................................... 167 Regulatory information ..................................................................................................................... 169 Regulatory Model Number ............................................................................................... 169 FCC statement ................................................................................................................. 170 Notice to users in Korea .................................................................................................. 170 VCCI (Class B) compliance statement for users in Japan ............................................... 170 Notice to users in Japan about the power cord ............................................................... 170 Noise emission statement for Germany ........................................................................... 171 Visual display workplaces statement for Germany .......................................................... 171 Notice to users of the U.S. telephone network: FCC requirements ................................. 171 Notice to users of the Canadian telephone network ........................................................ 172 Notice to users in the European Economic Area ............................................................. 172 Notice to users of the German telephone network .......................................................... 173 Australia wired fax statement ........................................................................................... 173 European Union Regulatory Notice ................................................................................. 173 Products with external AC Adapters ............................................................... 173 Products with wireless functionality ................................................................. 173 European telephone network declaration (Modem/Fax) ................................. 174 Declaration of conformity ................................................................................................. 174 Regulatory information for wireless products ................................................................... 174 Exposure to radio frequency radiation ............................................................ 175 Notice to users in Brazil .................................................................................. 175 Notice to users in Canada ............................................................................... 175 Notice to users in Taiwan ................................................................................ 176 Notice to users in Mexico ................................................................................ 176 Wireless notice to users in Japan ................................................................... 176 Environmental product stewardship program ................................................................................... 177 Paper use ........................................................................................................................ 177 Plastics ............................................................................................................................ 177 Material safety data sheets .............................................................................................. 177 Recycling program ........................................................................................................... 178 HP inkjet supplies recycling program ............................................................................... 178 Disposal of waste equipment by users ............................................................................ 178 Power consumption ......................................................................................................... 178 Chemical substances ....................................................................................................... 178 Battery disposal in the Netherlands ................................................................................. 179 Battery disposal in the Taiwan ......................................................................................... 179 California Perchlorate Material Notice ............................................................................. 179 Toxic and hazardous substance table (China) ................................................................ 179 Restriction of hazardous substance (Ukraine) ................................................................. 179 Restriction of hazardous substance (India) ..................................................................... 180 EPEAT ............................................................................................................................. 180 China SEPA Ecolabel User Information .......................................................................... 180 ENWW xi Appendix B Additional fax setup ...................................................................................................................... 181 Set up faxing (parallel phone systems) ............................................................................................ 182 Select the correct fax setup for your home or office ........................................................ 183 Case A: Separate fax line (no voice calls received) ........................................................ 184 Case B: Set up the printer with DSL ................................................................................ 185 Case C: Set up the printer with a PBX phone system or an ISDN line ............................ 186 Case D: Fax with a distinctive ring service on the same line ........................................... 187 Case E: Shared voice/fax line .......................................................................................... 188 Case F: Shared voice/fax line with voice mail ................................................................. 189 Case G: Fax line shared with computer modem (no voice calls received) ...................... 190 Set up the printer with a computer dial-up modem ......................................... 191 Set up the printer with a computer DSL/ADSL modem ................................... 192 Case H: Shared voice/fax line with computer modem ..................................................... 193 Shared voice/fax with computer dial-up modem ............................................. 193 Shared voice/fax with computer DSL/ADSL modem ....................................... 194 Case I: Shared voice/fax line with answering machine .................................................... 196 Case J: Shared voice/fax line with computer modem and answering machine ............... 197 Shared voice/fax line with computer dial-up modem and answering machine ........................................................................................................... 197 Shared voice/fax line with computer DSL/ADSL modem and answering machine ........................................................................................................... 199 Case K: Shared voice/fax line with computer dial-up modem and voice mail ................. 201 Serial-type fax setup ......................................................................................................................... 203 Test fax setup ................................................................................................................................... 204 Appendix C Errors (Windows) .......................................................................................................................... 205 Fax memory full ................................................................................................................................ 207 Unable to communicate with printer ................................................................................................. 208 Low on ink ........................................................................................................................................ 209 Printhead Problem ............................................................................................................................ 210 Ink Cartridge Problem ...................................................................................................................... 211 Replace the ink cartridge .................................................................................................................. 212 Incompatible older generation cartridge installed ............................................................................. 213 Paper Mismatch ............................................................................................................................... 214 The cartridge cradle cannot move .................................................................................................... 215 Paper Jam ........................................................................................................................................ 216 The printer is out of paper ................................................................................................................ 217 Printer Offline ................................................................................................................................... 218 Printer Paused .................................................................................................................................. 219 Document failed to print ................................................................................................................... 220 Printer failure .................................................................................................................................... 221 Door or cover open ........................................................................................................................... 222 Previously used ink cartridge installed ............................................................................................. 223 Ink cartridges depleted ..................................................................................................................... 224 xii ENWW Ink cartridge failure ........................................................................................................................... 225 Printer supply upgrade ..................................................................................................................... 226 Printer supply upgrade successful ................................................................................................... 227 Printer supply upgrade problem ....................................................................................................... 228 Non-HP ink cartridges installed ........................................................................................................ 229 Using Genuine HP Cartridges has its Rewards ............................................................................... 230 Counterfeit Cartridge Advisory ......................................................................................................... 231 Used, Refilled or Counterfeit Cartridge Detected ............................................................................. 232 Use SETUP cartridges ..................................................................................................................... 233 Do not use SETUP cartridges .......................................................................................................... 234 Not enough ink at startup ................................................................................................................. 235 Use black ink only? .......................................................................................................................... 236 Use color ink only? ........................................................................................................................... 237 Incompatible ink cartridges ............................................................................................................... 238 Ink sensor failure .............................................................................................................................. 239 Ink sensor warning ........................................................................................................................... 240 Problem with printer preparation ...................................................................................................... 241 Color cartridge out of ink .................................................................................................................. 242 Black cartridge out of ink .................................................................................................................. 243 Automatic document feeder cover open ........................................................................................... 244 Problem with ink system ................................................................................................................... 245 Index ................................................................................................................................................................. 247 ENWW xiii xiv ENWW 1 ENWW How do I? ● Get started on page 3 ● Print on page 41 ● Copy and scan on page 53 ● Fax on page 61 ● Web Services on page 87 ● Work with ink cartridges on page 95 ● Solve a problem on page 121 1 2 Chapter 1 How do I? ENWW 2 Get started This guide provides details about how to use the printer and how to resolve problems. ENWW ● Accessibility ● HP EcoSolutions (HP and the Environment) ● Understand the printer parts ● Use the printer control panel ● HP Digital Solutions ● Near field communication (NFC) ● Paper basics ● Load paper ● Load an original on the scanner glass ● Load an original in the document feeder ● Insert a USB flash drive ● Set up and use accessories ● Maintain the printer ● Update the printer ● Open the HP printer software (Windows) ● Turn the printer off ● Restore defaults 3 Accessibility The printer provides a number of features that make it accessible for people with disabilities. Visual The HP software provided with the printer is accessible for users with visual impairments or low vision by using your operating system's accessibility options and features. The software also supports most assistive technology such as screen readers, Braille readers, and voice-to-text applications. For users who are color blind, colored buttons and tabs used in the HP software have simple text or icon labels that convey the appropriate action. Mobility For users with mobility impairments, the HP software functions can be executed through keyboard commands. The HP software also supports Windows accessibility options such as StickyKeys, ToggleKeys, FilterKeys, and MouseKeys. The printer doors, buttons, paper trays, and paper-width guides can be operated by users with limited strength and reach. Support For more details about the accessibility of this printer and HP's commitment to product accessibility, visit HP's website at www.hp.com/accessibility. (OS X) For accessibility information, visit the Apple website at www.apple.com/accessibility. 4 Chapter 2 Get started ENWW HP EcoSolutions (HP and the Environment) Hewlett-Packard is committed to helping you optimize your environmental footprint and empowering you to print responsibly—at home or in the office. For more detailed information about environmental guidelines that HP follows during the manufacturing process, see Environmental product stewardship program on page 177. For more information about HP's environmental initiatives, visit www.hp.com/ecosolutions. ● Manage Power ● Optimize Printing Supplies Manage Power To conserve electricity, the printer comes with the following features. You can also turn the features on or off from the printer software or Embedded web server (EWS). To open the printer software, see Open the HP printer software (Windows) on page 37. To open the EWS, see Embedded web server on page 118. Sleep mode Power usage is reduced while in Sleep mode. After initial setup, the printer goes into low-power mode after 5 minutes of inactivity. To change the time to Sleep mode: 1. From the printer control panel display, touch 2. Touch Sleep, and then touch the desired option. (ECO). NOTE: If you change your country or region from the printer control panel, the time to sleep mode is automatcially set to the default, which is 5 minutes. Schedule On and Off Use this feature to automatically save energy during evenings and weekends. For example, you can schedule the printer to turn on at 8 a.m. and turn off at 8 p.m. from Monday to Friday. In this way, you will save energy during the night and weekends. To configure the printer's Schedule On and Off feature: (ECO). 1. From the printer control panel display, touch 2. Touch Schedule On and Off. 3. Touch Schedule On and Schedule Off to set the time to turn the printer on and off. CAUTION: Always turn off the printer properly, using either Sleep Mode, Schedule On and Off, or (the Power button). If you incorrectly turn the printer off, the print carriage might not return to the correct position, causing problems with the ink cartridges and print quality issues. Optimize Printing Supplies To optimize printing supplies such as ink and paper, try the following: ENWW HP EcoSolutions (HP and the Environment) 5 6 ● Optimize paper usage by printing on both sides of the paper. ● Save ink and paper when printing web content with HP Smart Print. For more information, visit www.hp.com/go/smartprint. ● Change the print mode to a draft setting. The draft setting uses less ink. ● Do not clean the printhead unnecessarily. Doing so wastes ink and shortens the life of the cartridges. Chapter 2 Get started ENWW Understand the printer parts This section contains the following topics: ● Front view ● Printing supplies area ● Back view Front view 1 Document feeder paper-width guides 2 Document feeder tray 3 Scanner glass 4 Control panel display 5 Output tray 6 Output tray extender 7 Main input tray 8 Front USB port 9 Power button 10 Near field communication (NFC) NOTE: 11 ENWW This feature is available with some models of the printer. Document feeder tray Understand the printer parts 7 Printing supplies area 1 Ink cartridge access door 2 Ink cartridges 3 Printhead 4 Printhead latch NOTE: Printing supplies should be kept in the printer to prevent possible print quality issues or printhead damage. Avoid removing supplies for extended periods of time. Do not turn off the printer when a cartridge is missing. Back view 8 1 Fax port (2-EXT) 2 Fax port (1-LINE) 3 Ethernet network port 4 Rear USB port 5 Power input Chapter 2 Get started ENWW Use the printer control panel This section contains the following topics: ● Overview of buttons and lights ● Control panel display icons ● Change printer settings Overview of buttons and lights The following diagram and related table provides a quick reference to the printer control panel features. Label Name and Description 1 Wireless status light: Blue light indicates a wireless connection. Touch capabilities. 2 Home button: Returns to the home screen from any other screen. 3 Control panel display: Touch the screen to select menu options. For addition menu options, touch and slide your finger across the screen. (Wireless) to turn on or off the printer wireless For information about the icons that appear on the display, see Control panel display icons on page 9. 4 Back button: Returns to the previous menu. 5 Help button: Opens the Help menu. Control panel display icons Icon Purpose Shows that a wired network connection exists and also provides easy access to the network status screen. Displays wireless status and menu options. For more information, see Set up the printer for wireless communication on page 106. (Ethernet) and (Wireless) do not display at the same time. Showing the Ethernet icon or the wireless icon NOTE: depends on the way your printer is connected to network. If the network connection of the printer has not been set up, by (Wireless). default, the printer control panel display shows Turn on (with and without security) or off wireless direct. If turning on wireless direct with security, then you can also display the wireless direct name and security password. Displays a screen where you can configure the product power saving settings features. ENWW Use the printer control panel 9 Icon Purpose Touch the icon to display the Web Services Settings where you can view the printer's email address and make ePrint settings. For more information, see HP ePrint on page 91. Displays a screen where you can make copies or select other options. Displays a screen where you can send a fax, or choose fax settings. Displays a screen where you can make a scan, or change scan settings. Displays a screen where you can use print apps. Displays the Setup screen for generating reports, changing fax and other maintenance settings, and accessing the Help screen. Provides more information about the printer features. Displays a screen where you can see information about the ink cartridges, including fill levels. This icon has a red border when an ink cartridge needs attention. NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace cartridges until prompted to do so. Displays the status of the Auto Answer function. Touch Auto Answer to turn it on or off. For more information, see Set the answer mode (Auto answer) on page 77. Change printer settings Use the control panel to change the printer function and settings, print reports, or get help for the printer. TIP: If the printer is connected to a computer, you can also change the printer settings using the printer management tools. For more information about these tools, see Printer management tools on page 115. To change settings for a function The Home screen of the control panel display shows the available functions for the printer. 1. From the control panel display, touch and slide your finger across the screen and then touch the icon to select the desired function. 2. After selecting a function, touch and scroll through the available settings, and then touch the setting you want to change. 3. Follow the prompts on the control panel display to change the settings. NOTE: Touch 10 Chapter 2 Get started (Home) to return to the Home screen. ENWW To change the printer settings To change the printer settings or print reports, use the options available on the Setup Menu screen. 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch and scroll through the screens. 3. Touch the screen items to select screens or options. NOTE: Touch ENWW (Home) to return to the Home screen. Use the printer control panel 11 HP Digital Solutions The printer includes a collection of digital solutions that can help you simplify and streamline your work. These digital solutions include the following: ● HP Digital Filing (including Scan to Network Folder and Scan to Email) ● HP Digital Fax (including Fax to Network Folder and Fax to Email) This section contains the following topics: ● What are HP Digital Solutions? ● Requirements ● Set up HP Digital Solutions ● Use the HP Digital Solutions What are HP Digital Solutions? HP Digital Solutions are a set of tools provided with this printer that can help improve your office productivity. HP Digital Filing HP Digital Filing provides robust, general-office scanning—as well as basic, versatile, documentmanagement capabilities—for multiple users over a network. With HP Digital Filing, you can simply walk up to the printer, select the options on the printer control panel, and either scan documents directly to computer folders on your network or quickly share them with business partners as email attachments—and all without using additional scanning software. These scanned documents can be sent to a shared network folder for personal or group access or to one or more email addresses for quick sharing. In addition, you can configure specific scan settings for each scan destination, allowing you to make sure that the best settings are being used for each specific task. HP Digital Fax Never lose important faxes misplaced within a stack of paper pages again! With HP Digital Fax, you can save incoming, black-and-white faxes to a computer folder on your network for easy sharing and storage, or you can forward faxes through email—allowing you to receive important faxes from anywhere while working away from the office. In addition, you can turn off fax printing altogether — saving money on paper and ink, as well as helping reduce paper consumption and waste. Requirements Before you set up the HP Digital Solutions, make sure you have the following: 12 Chapter 2 Get started ENWW For all HP Digital Solutions ● A network connection The printer can be connected either through a wireless connection or using an Ethernet cable. NOTE: If the printer is connected using a USB cable, you scan documents to a computer or attach scans to an email message using the HP software. For more information, see Scan an original on page 56. You can receive faxes to your computer using HP Digital Fax. For more information, see Receive faxes using HP Digital Fax on page 71. ● The HP software HP recommends that you set up HP Digital Solutions using the HP software provided with the printer. TIP: If you would like to set up HP Digital Solutions without installing the HP software, you can use the printer’s embedded web server. For Scan to Network Folder, Fax to Network Folder ● An active network connection. You must be connected to the network. ● An existing Windows (SMB) shared folder For information about finding the computer name, see the documentation for your operating system. ● The network address for the folder On computer running Windows, network addresses are usually written in this format: \\mypc \sharedfolder ● The name of the computer where the folder is located For information about finding the computer name, see the documentation for your operating system. ● Appropriate privileges on the shared folder You must have write access to the folder. ● A username and password for the shared folder (if necessary) For example, the Windows or OS X username and password used to log onto the network. NOTE: HP Digital Filing does not support Active Directory. For Scan to Email, Fax to Email ● A valid email address ● Outgoing SMTP server information ● An active Internet connection If you are setting up Scan to Email or Fax to Email on a computer running Windows, the setup wizard can automatically detect the email settings for the following email applications: ENWW ● Microsoft Outlook 2003–2007 (Windows XP, Windows Vista, and Windows 7) ● Outlook Express (Windows XP) ● Windows Mail (Windows Vista) HP Digital Solutions 13 ● Mozilla Thunderbird (Windows XP, Windows Vista, and Windows 7) ● Qualcomm Eudora (version 7.0 and above) (Windows XP and Windows Vista) ● Netscape (version 7.0) (Windows XP) However, if your email application is not listed above, you can still set up and use Scan to Email and Fax to Email if your email application meets the requirements listed in this section. Set up HP Digital Solutions You can set up HP Digital Solutions using the HP software provided with the printer—either using software wizards that you can open from the HP printer software (Windows) or HP Utility (OS X). TIP: You can also use the printer's EWS to set up the HP Digital Solutions. For more information about using the EWS, see Embedded web server on page 118. NOTE: If you are using the printer in an IPv6-only network environment, you must set up the digital solutions using the EWS. This section contains the following topics: ● Set up HP Digital Filing ● Set up HP Digital Fax Set up HP Digital Filing To set up HP Digital Filing, follow the appropriate instructions. NOTE: You can also use these steps to change settings in the future. This section contains the following topics: ● Set up Scan to Network Folder ● Set up Scan to Email Set up Scan to Network Folder You can configure up to 10 destination folders for each printer. NOTE: To use Scan to Network Folder, you must have created and configured the folder you are using on a computer connected to the network. You cannot create a folder from the printer's control panel. Also, make sure the folder preferences are set to provide read and write access. For more information about creating folders on the network and setting folder preferences, see the documentation for your operating system. After you finish setting up Scan to Network Folder, the HP software automatically saves the configurations to the printer. To set up Scan to Network Folder, complete the following steps for your operating system. To set up Scan to Network Folder from the printer software (Windows) 14 1. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 2. Go to the Scan section under Print, Scan & Fax, and then double-click Scan to Network Folder Wizard. 3. Follow the on-screen instructions. Chapter 2 Get started ENWW NOTE: After you create destination folders, you can use the printer’s EWS to customize the scan settings for these folders. On the last screen of the Scan to Network Folder Wizard, make sure the Launch embedded web server when finished check box is selected. When you click Finish, the EWS is displayed in your computer’s default web browser. For more information about the embedded web server, see Embedded web server on page 118. To set up Scan to Network Folder from the printer software (OS X) 1. Open HP Utility. For more information, see HP Utility (OS X) on page 117. 2. Click Scan to Network Folder under the Scan Settings section, and then follow the on-screen instructions. NOTE: You can customize the scan settings for each destination folder. To set up Scan to Network Folder from Embedded web server (EWS) 1. Open the embedded web server (EWS). For more information, see Open the embedded web server on page 118. 2. On the Home tab, click Network Folder Setup in the Setup box. 3. Click New, and then follow the on-screen instructions. NOTE: You can customize the scan settings for each destination folder. 4. After you have entered the required information about the network folder, click Save and Test to make sure the link to the network folder is working correctly. The entry is added to the Network Folder list. Set up Scan to Email You can use the printer to scan documents and send them to one or more email addresses as attachments—without additional scanning software. You do not need to scan files from your computer and attach them to email messages. To use the Scan to Email feature, complete the following preliminary steps: Set the Outgoing Email Profiles Configure the email address which will appear in the FROM portion of the email message sent by the printer. You can add up to 10 Outgoing Email Profiles. You can use the HP software installed on your computer to create these profiles. Add email addresses to the Email Address Book Manage the list of people to whom you can send email messages from the printer. You can add up to 15 email addresses with their corresponding contact names. You can also create email groups. To add email addresses, you can use the printer’s embedded web server (EWS) or the printer’s control panel. Configure other email options You can configure default SUBJECT and body text that is included in all email messages sent from the printer. To configure these options, you can use the printer’s EWS or the printer’s control panel. Step 1: Set up the outgoing email profiles To set up the outgoing email profile used by the printer, complete the following steps for your operating system. ENWW HP Digital Solutions 15 To set up the outgoing email profile from the printer software (Windows) 1. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 2. Go to the Scan section under Print, Scan & Fax, and then double-click Scan to E-mail Wizard. 3. Click New, and then follow the on-screen instructions. NOTE: After you set the Outgoing Email Profile, you can use the printer’s embedded web server (EWS) to add more Outgoing Email Profiles, add email addresses to the Email Address Book, and configure other email options. To open the EWS automatically, make sure the Launch embedded web server when finished check box is selected on the last screen of the Scan to Email Wizard. When you click Finish, the EWS is displayed in your computer’s default web browser. For more information about the embedded web server, see Embedded web server on page 118 To set up the outgoing email profile from the printer software (OS X) 1. Open HP Utility. For more information, see HP Utility (OS X) on page 117. 2. Click Scan to Email under the Scan Settings section. 3. Follow the on-screen instructions. 4. After you have entered the required information about the network folder, click Save and Test to make sure the link to the network folder is working correctly. The entry is added to the Outgoing Email Profiles list. To set up the outgoing email profile from Embedded web server (EWS) 1. Open the embedded web server (EWS). For more information, see Embedded web server on page 118. 2. On the Home tab, click Outgoing Email Profiles in the Setup box. 3. Click New, and then follow the on-screen instructions. 4. After you have entered the required information about the network folder, click Save and Test to make sure the link to the network folder is working correctly. The entry is added to the Outgoing Email Profile List. Step 2: Add email addresses to the Email Address Book To add email addresses to the Email Address Book, complete the following steps: 1. Open the embedded web server (EWS). For more information, see Embedded web server on page 118. 2. On the Scan tab, click Email Address Book. 3. Click New to add a single email address. -OrClick Group to create an email distribution list. NOTE: Before you can create an email distribution list, you must have already added at least one email address to the Email Address Book. 4. Follow the on-screen instructions. The entry is added to the Email Address Book. NOTE: Contact names appear on the printer’s control panel display and in your email application. 16 Chapter 2 Get started ENWW Step 3: Configure other email options To configure other email options (such as configuring default SUBJECT and body text that is included in all email messages sent from the printer, as well as scan settings used when sending email from the printer), complete the following steps: 1. Open the embedded web server (EWS). For more information, see Embedded web server on page 118. 2. On the Scan tab, click Email Options. 3. Change any settings, and then click Apply. Set up HP Digital Fax With HP Digital Fax, the printer automatically receives faxes and saves them directly to a network folder (Fax to Network Folder) or forwards them as email attachments (Fax to Email). NOTE: You can configure HP Digital Fax to use either Fax to Network Folder or to use Fax to Email. You cannot use both at the same time. Received faxes are saved as TIFF (Tagged Image File Format) or PDF files. CAUTION: HP Digital Fax is available for receiving black-and-white faxes only. Color faxes are printed instead of being saved. To set up HP Digital Fax from the printer software (Windows) 1. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 2. Go to the Fax section under the Print, Scan & Fax, and then double-click Digital Fax Setup. 3. Follow the on-screen instructions. NOTE: After you set up HP Digital Fax, you can use the printer’s embedded web server (EWS) to edit HP Digital Fax settings. To open the EWS automatically, make sure the Launch embedded web server when finished check box is selected on the last screen of the Digital Fax Setup Wizard. When you click Finish, the EWS is displayed in your computer’s default web browser. For more information about the embedded web server, see Embedded web server on page 118. To set up HP Digital Fax from the printer software (OS X) 1. Open HP Utility. For more information, see HP Utility (OS X) on page 117. 2. Click Digital Fax Archive. 3. Follow the on-screen instructions. 4. After you have entered the required information, click Save and Test to make sure the link to the network folder is working correctly. To set up HP Digital Fax from Embedded web server (EWS) ENWW 1. On the Home tab, click Fax to Email/Network Folder in the Setup box. 2. Follow the on-screen instructions. 3. After you have entered the required information, click Save and Test to make sure the link to the network folder is working correctly. HP Digital Solutions 17 Use the HP Digital Solutions To use the HP Digital Solutions available with the printer, follow the appropriate instructions. Use HP Scan to Network Folder 1. Load your original print-side down on the right-front corner of the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 2. Touch Scan, and then touch Network Folder. 3. On the control panel display, select the name that corresponds to the folder you want to use. 4. If prompted, enter the PIN. 5. Change any scan settings, and then touch Start Scan. NOTE: The connection might take some time, depending on network traffic and connection speed. Use Scan to Email 1. Load your original print-side down on the right-front corner of the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 2. Touch Scan, and then touch Email. 3. On the control panel display, select the name that corresponds to the Outgoing Email Profile you want to use. 4. If prompted, enter the PIN. 5. Select the TO email address (the email recipient) or enter an email address. 6. Enter or change the SUBJECT for the email message. 7. Change any scan settings, and then touch Start Scan. NOTE: The connection might take some time, depending on network traffic and connection speed. Use HP Digital Fax After you set up HP Digital Fax, any black-and-white faxes that you receive print, by default, and then are saved to the designated destination—either the network folder or email address that you have specified: 18 ● If you are using Fax to Network Folder, this process happens in the background. HP Digital Fax does not notify you when faxes are saved to the network folder. ● If you are using Fax to Email and if your email application is set to notify you when new email messages arrive in your inbox, you can see when new faxes arrive. Chapter 2 Get started ENWW Near field communication (NFC) With near field communication (NFC), you can quickly print documents and images from a mobile device (such as a smartphone or tablet) just by touching the device on the printer. Look for on the front of the printer, near the printer control panel, and then touch your mobile device to this area to print. For more information about supported mobile devices and capabilities, visit the HP Mobile Printing web site (www.hp.com/go/mobileprinting). NOTE: This feature is available with some models of the printer. To use this feature, make sure your mobile device supports NFC and make sure NFC is turned on in the printer. ENWW Near field communication (NFC) 19 Paper basics The printer is designed to work well with most types of office paper. It is best to test a variety of print paper types before buying large quantities. Use HP paper for optimum print quality. Visit the HP website at www.hp.com for more information about HP paper. HP recommends plain papers with the ColorLok logo for printing everyday documents. All papers with the ColorLok logo are independently tested to meet high standards of reliability and print quality, and produce documents with crisp, vivid color, bolder blacks, and that dry faster than ordinary plain papers. Look for papers with the ColorLok logo in a variety of weights and sizes from major paper manufacturers. This section contains the following topics: ● Recommended papers for printing ● Order HP paper supplies ● Tips for selecting and using paper Recommended papers for printing If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing. Depending on your country/region, some of these papers might not be available. Photo printing ● HP Premium Plus Photo Paper HP Premium Plus Photo Paper is HP’s highest-quality photo paper for your best photos. With HP Premium Plus Photo Paper, you can print beautiful photos that are instant-dry so you can share them right off the printer. It is available in several sizes, including A4, 8.5 x 11 inches, 4 x 6 inches (10 x 15 cm), 5 x 7 inches (13 x 18 cm), and 11 x 17 inches (A3), and in two finishes glossy or soft gloss (semi-gloss). Ideal for framing, displaying, or gifting your best photos and special photo projects. HP Premium Plus Photo Paper delivers exceptional results with professional quality and durability. ● HP Advanced Photo Paper This thick photo paper features an instant-dry finish for easy handling without smudging. It resists water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to a store-processed photo. It is available in several sizes, including A4, 8.5 x 11 inches, 10 x 15 cm (4 x 6 inches), 13 x 18 cm (5 x 7 inches). It is acid-free for longer lasting documents. ● HP Everyday Photo Paper Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This affordable photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper with any inkjet printer. It is available in glossy finish in several sizes, including A4, 8.5 x 11 inches, and 10 x 15 cm (4 x 6 inches). It is acid-free for longer lasting documents. 20 Chapter 2 Get started ENWW Business documents ● HP Premium Presentation Paper 120g Matte or HP Professional Paper 120 Matt These papers are heavy two-sided matte papers perfect for presentation, proposals, reports, and newsletters. They are heavyweight for an impressive look and feel. ● HP Brochure Paper 180g Glossy or HP Professional Paper 180 Glossy These papers are glossy-coated on both sides for two-sided use. They are the perfect choice for near-photographic reproductions and business graphics for report covers, special presentations, brochures, mailers, and calendars. ● HP Brochure Paper 180g Matte or HP Professional Paper 180 Matt These papers are matte-coated on both sides for two-sided use. They are the perfect choice for near-photographic reproductions and business graphics for report covers, special presentations, brochures, mailers, and calendars. Everyday printing ● HP Bright White Inkjet Paper HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque enough for two-sided color usage with no show-through, which makes it ideal for newsletters, reports, and flyers. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. ● HP Printing Paper HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel more substantial than documents printed on standard multipurpose or copy paper. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents. ● HP Office Paper HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and other everyday documents. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents. ● HP Office Recycled Paper HP Office Recycled Paper is a high-quality multifunction paper made with 30% recycled fiber. It features ColorLok Technology for less smearing, bolder blacks and vivid colors. Special projects ● HP Iron-On Transfers HP Iron-on Transfers (for light or white fabrics) are the ideal solution for creating custom T-shirts from your digital photos. Order HP paper supplies The printer is designed to work well with most types of office paper. Use HP paper for optimum print quality. Visit the HP website at www.hp.com for more information about HP paper. HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents. All papers with the ColorLok logo are independently tested to meet high standards of reliability and print quality, and produce documents with crisp, vivid color, bolder blacks and dry faster than ordinary plain papers. Look for papers with the ColorLok logo in a variety of weights and sizes from major paper manufacturers. ENWW Paper basics 21 You can purchase HP paper and supplies online at www.hp.com. Look for the Shop for Products and Services link. Tips for selecting and using paper For the best results, observe the following guidelines. ● Load only one type of paper at a time into a tray or automatic document feeder (ADF). ● When loading the trays and ADF, make sure the paper is loaded correctly. ● Do not overload the tray or ADF. ● To prevent jams, poor print quality, and other printing problems, avoid loading the following paper in the trays or ADF: ◦ Multipart forms ◦ Paper that is damaged, curled, or wrinkled ◦ Paper with cutouts or perforations ◦ Paper that is heavily textured, embossed, or does not accept ink well ◦ Paper that is too lightweight or stretches easily ◦ Paper that contains staples or clips For more information on loading paper, see Load paper on page 23 or Load an original in the document feeder on page 28. 22 Chapter 2 Get started ENWW Load paper This section provides instructions for loading paper into the printer. ● Load standard-size paper ● Load envelopes ● Load cards and photo paper Load standard-size paper To load standard paper: 1. Pull out main input tray. 2. Slide the paper-width guides out as far as possible. 3. Insert the paper print-side down in the center of the tray. Make sure the stack of paper is inserted as far inside the printer as possible and does not exceed the higher line marking in the tray. For more help, refer to the diagram engraved in the tray. NOTE: Do not load paper while the printer is printing. ENWW Load paper 23 4. Slide the paper-width guides in the tray until they touch the edge of the stack of paper, and then reinsert the tray. NOTE: To load legal-size paper, press the blue latch at the bottom left of the input tray and fully extend the tray. 5. Pull out the output tray extension until the intended paper size is reached. NOTE: If you have a second tray, see Install and use second tray (Tray 2) on page 30 for how to load paper. Load envelopes To load an envelope: NOTE: 1. 24 If your printer has a second tray (Tray 2), do not insert envelopes for printing in this slot. Pull out main input tray. Chapter 2 Get started ENWW 2. Insert the envelopes print-side down and load according to the graphic. Make sure the stack of envelopes does not exceed the lower line marking in the tray. For more help, refer to the diagram engraved in the tray. NOTE: Do not load envelopes while the printer is printing. 3. Slide the paper-width guides in the tray until they touch the edge of the stack of envelopes, and then reinsert the tray. 4. Pull out the output tray extension until the intended paper size is reached. Load cards and photo paper To load cards and photo paper: If your printer has a second tray (Tray 2), do not insert cards or photo paper for printing in this slot. 1. ENWW Pull out main input tray. Load paper 25 2. Insert the paper print-side down in the center of the tray. Make sure the stack of paper is inserted as far inside the printer as possible and does not exceed the lower line marking in the tray. For more help, refer to the diagram engraved in the tray. If the photo paper has a tab along one edge, make sure the tab is pointing towards the front of the printer. NOTE: Do not load paper while the printer is printing. 26 3. Slide the paper-width guides in the tray until they touch the edge of the stack of paper, and then reinsert the tray. 4. Pull out the output tray extension until the intended paper size is reached. Chapter 2 Get started ENWW Load an original on the scanner glass You can copy, scan, or fax originals by loading them on the scanner glass. NOTE: Many of the special features do not work correctly if the scanner glass and lid backing are not clean. For more information, see Maintain the printer on page 34. NOTE: Remove all originals from the document feeder tray before lifting the lid on the printer. To load an original on the scanner glass Use these steps to load an original on the scanner glass. 1. Lift the scanner lid. 2. Load your original print-side down near to the engaved guides along the scanner glass edge as shown in the following illustration. NOTE: If you are using the scanner glass, ensure that the automatic document feeder is empty. Otherwise, the printer will sense the document in the ADF instead of the paper on the scanner glass. 3. ENWW Close the lid. Load an original on the scanner glass 27 Load an original in the document feeder You can copy, scan, or fax a document by placing it in the document feeder. CAUTION: Do not load photos in the document feeder; this might cause damage to your photos. Use only paper that is supported by the document feeder. For more information, see Tips for selecting and using paper on page 22. NOTE: Scanning double-sided documents on A4, Letter-, or legal-size paper can only be supported by some models of the printer ADF. NOTE: Some features, such as the Fit to Page copy feature, do not work when you load your originals in the ADF. You must load your originals on the scanner glass. The document feeder tray holds a maximum of 35 or 50 sheets of plain A4-, Letter-, or legal-size paper, depending on the printer model. To load an original in the document feeder Use these steps to load a document in the ADF. 1. Load your original print-side up into the ADF. a. If you are loading an original printed in portrait orientation, place the pages so that the top edge of the document goes in first. If you are loading an original printed in landscape orientation, place the pages so that the left edge of the document goes in first. b. Slide the paper into the ADF until you hear a tone or see a message on the display indicating that the loaded pages were detected. TIP: For more help on loading originals in the ADF, refer to the diagram engraved in the document feeder tray. 2. 28 Slide the paper-width guides inward until they stop at the left and right edges of the paper. Chapter 2 Get started ENWW Insert a USB flash drive Using the USB port on the front of the printer, you can connect a USB flash drive. You can also transfer files from the USB flash drive to your computer or scan files to the USB flash drive from the printer. CAUTION: Attempting to remove a USB flash drive while it is being accessed can damage files on the USB flash drive. You can safely remove a USB flash drive only when the status light is not blinking. NOTE: The printer does not support encrypted USB flash drives. To connect a USB flash drive ▲ Insert the USB flash drive to the USB port on the front of the printer. NOTE: If your USB flash drive does not fit into this port due to size limitations, or if the connector on the device is shorter than 11 mm (0.43 in), you will need to purchase a USB extension cable in order to use your device with this port. ENWW Insert a USB flash drive 29 Set up and use accessories If you want to install and set up accessories (such as a second tray and duplexer), see the following sections. When using more than one tray, you can make use of the tray features provided to achieve a better experience. NOTE: You can purchase the accessories online at www.hp.com. Look for Shop for Products and Services. ● To install a duplexer, see Install the automatic two-sided printing accessory (duplexer) on page 30. ● To install Tray 2, see Install and use second tray (Tray 2) on page 30. ● To understand about using tray features, see Work with trays on page 31. Install the automatic two-sided printing accessory (duplexer) For information on duplexing, see Print on both sides (duplexing) on page 48. To install a duplexer ▲ Slide the duplexer into the back of the printer until the unit locks into place. Do not press the buttons on either side of the duplexer when installing the unit; use them only for removing the unit from the printer. Install and use second tray (Tray 2) To install Tray 2 1. Unpack the tray, remove the packing tapes and materials, and move the tray to the prepared location. The surface must be sturdy and level. 2. Turn off the printer, and unplug the power cord from the electrical socket. 3. Set the printer on top of the tray. CAUTION: Be careful to keep your fingers and hands clear of the bottom of the printer. 4. Connect the power cord and turn on the printer. 5. Enable Tray 2 in the printer driver. For more information, see Work with trays on page 31. 30 Chapter 2 Get started ENWW To load paper in Tray 2 Tray 2 supports only plain paper that are not smaller than A4 or Letter . For more information about the capcity of the input tray, see Input tray capacity on page 165. 1. Pull the tray out of the printer by grasping under the front of the tray. 2. Insert the paper print-side down in the center of the tray. Make sure the stack of paper aligns with the line on the paper-width guide, and does not exceed the higher line marking in the tray. NOTE: Tray 2 can be loaded only with plain paper. 3. Slide the paper-width guides in the tray to adjust them for the size that you have loaded. 4. Gently reinsert the tray. 5. Pull out the output tray extender. Work with trays When using more than one tray, you can make use of the tray features provided and change the settings to achieve a better experience. By default, the printer draws paper from Tray 1. If Tray 1 is empty and Tray 2 is installed and contains paper, the printer will draw paper from Tray 2. You can change the behaviors using the following features: ● Default Tray: Set the default tray from which the printer draws paper first. ● Tray Lock: Lock a tray to prevent it from accidental use; for example, when you have loaded special paper (such as letterhead or preprinted paper). The printer will not use a locked tray even when the other tray is empty. ENWW Set up and use accessories 31 NOTE: For better experience, load only one type of paper in a tray. NOTE: Tray 2 supports only plain paper. To achieve this Follow these steps Have paper loaded in both trays and use paper from one tray if the other tray is empty. ● Load paper in both trays. For more information, see Load paper on page 23. ● Turn off tray lock. Have paper loaded in both trays and use paper from one of the trays first. ● Load paper in both trays. ● Set the desired tray as the default tray. Be able to choose from plain paper and another paper type that you use occasionally. ● Load special paper in main input tray and plain paper in Tray 2. NOTE: For better experience, load only one type of paper in a tray. ● Lock the main input tray and set Tray 2 as the default tray. To change tray settings NOTE: You can also change the tray settings from the printer software or EWS. To access EWS and the printer software, see Embedded web server on page 118 and Open the HP printer software (Windows) on page 37. 1. Make sure the printer is turned on. 2. Make sure you have turned on automatic selection of paper source. 3. From the printer control panel display, touch and slide your finger across the screen and touch Setup. 4. Touch Tray Setup, touch Default Tray or Tray Lock, and then select the appropriate option. To turn on automatic selection of tray or paper source (Windows) 1. 32 Depending on your operating system, do one of the following: ● Windows 8: On the Start screen, click Control Panel, click View devices and printers; rightclick the printer icon, and then click Printing preferences. ● Windows 7: Click Start, click Devices and Printers; right-click the printer icon, click Printing preferences, and then select your printer name. ● Windows Vista and Windows XP: Click Start, click Printers or Printers and Faxes; right-click the printer icon, click Printing preferences. 2. On the Printing preferences tab, click the Paper/Quality tab. 3. Select Printer Auto Select from the Paper Source drop-down list in the Tray Selection area. 4. Click OK twice to close the pages and accept changes. Chapter 2 Get started ENWW To turn on automatic selection of tray or paper source (OS X) 1. From the File menu in your software, choose Print. 2. Make sure your printer is selected. 3. Select Automatically Select from the Source drop-down list. Do the following if you do not see options on the Print dialog. ENWW ● OS X v10.6: Click the blue disclosure triangle next to the Printer selection to access the print options. ● OS X Lion and Mountain Lion: Click Show Details to access the print options. Set up and use accessories 33 Maintain the printer This section provides instructions for keeping the printer in top working condition. Perform these maintenance procedures as necessary. ● Clean the scanner glass ● Clean the exterior ● Clean the automatic document feeder Clean the scanner glass Dust or dirt on the scanner glass, scanner lid backing, or scanner frame can slow down performance, degrade the quality of scans, and affect the accuracy of special features such as fitting copies to a certain page size. To clean the scanner glass (the Power button) and unplug the power cord from the 1. Turn off the printer by pressing the electrical socket. 2. Lift the scanner lid. 3. Clean the scanner glass and lid backing by using a soft, lint-free cloth that has been sprayed with a mild glass cleaner. CAUTION: Use only glass cleaner to clean the scanner glass. Avoid cleaners that contain abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl alcohol because it can leave streaks on the scanner glass. CAUTION: Do not spray the glass cleaner directly on the scanner glass. If too much glass cleaner is applied, the cleaner could leak under the scanner glass and damage the scanner. 4. Close the scanner lid, and turn on the printer. Clean the exterior WARNING! Before cleaning the printer, press unplug the power cord from the wall socket. (the Power button) to turn off the printer and Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the case. Keep fluids away from the interior of the printer, as well as from the printer control panel. 34 Chapter 2 Get started ENWW Clean the automatic document feeder If the automatic document feeder picks up multiple pages or if it does not pick up plain paper, you can clean the rollers and separator pad. To clean the rollers or separator pad (the Power button) and unplug the power cord from the 1. Turn off the printer by pressing the electrical socket. 2. Remove all originals from the document feeder tray. 3. Lift the automatic document feeder cover (1). This provides easy access to the rollers (2) and separator pad (3). 1 Automatic document feeder cover 2 Rollers 3 Separator pad 4. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess liquid from the cloth. 5. Use the damp cloth to wipe any residue off the rollers or separator pad. NOTE: If the residue does not come off using distilled water, try using isopropyl (rubbing) alcohol. 6. ENWW Close the cover of the automatic document feeder. Maintain the printer 35 Update the printer HP is always working to improve the performance of its printers and bring you the latest features. NOTE: By default, if the printer is connected to a network and Web Services has been enabled, the printer automatically checks for updates. To update the printer using the printer control panel 1. From the printer control panel display, touch touch Printer Update. 2. Touch Check for Product Update, and then follow the on-screen instructions. (HP ePrint), touch OK, touch Settings, and then To enable the printer to automatically check for updates NOTE: The default setting of Auto Update is On. 1. From the printer control panel display, touch touch Printer Update. 2. Touch Auto Update and then touch On. (HP ePrint), touch OK, touch Settings, and then To update the printer using the embedded web server 1. Open the EWS. For more information, see Embedded web server on page 118. 2. Click the Web Services tab. 3. In the Web Services Settings section, click Product Update, click Check Now, and then follow the on-screen instructions. 4. If the product update option is not available, follow these instructions: a. In the Web Services Settings section, click Setup, click Continue, and follow the on-screen instructions. b. If prompted, choose to allow the printer to check for and install printer updates. NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts. NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the details, contact your network administrator or the person who set up the network. 36 Chapter 2 Get started ENWW Open the HP printer software (Windows) After installing the HP printer software, depending on your operating system, do one of the following: ENWW ● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name. ● Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the icon with the printer's name. Open the HP printer software (Windows) 37 Turn the printer off Turn the printer off by pressing (the Power button) located on the printer. Wait until the power light turns off before unplugging the power cord or turning off a power strip. CAUTION: If you incorrectly turn the printer off, the print carriage might not return to the correct position, causing problems with the ink cartridges and print quality issues. 38 Chapter 2 Get started ENWW Restore defaults If you disable some functions or change some settings and want to change them back, you can restore the printer to the original factory settings or network settings. To restore the printer to the original factory settings 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Tools. 3. Touch Restore Factory Defaults, and then touch Yes. A message appears stating that the printer defaults have been restored. 4. Touch OK. To restore the printer to the original network settings 1. From the printer control panel, touch and slide your finger across the screen, touch Setup, and then touch Network Setup. 2. Touch Restore Network Defaults, and then touch Yes. A message appears stating that the network defaults have been restored. 3. Touch OK. 4. Print the network configuration page and verify that the network settings have been reset. For more information, see Network configuration page on page 126. NOTE: Previously configured wireless settings are removed when you reset the printer network settings. TIP: You can visit the HP online support website at www.hp.com/support for information and utilities that can help you correct many common printer problems. (Windows) If you're having trouble printing, run the HP Print and Scan Doctor to troubleshoot the issue automatically. The utility will try to diagnose and fix the issue. The HP Print and Scan Doctor may not be available in all languages. ENWW Restore defaults 39 40 Chapter 2 Get started ENWW 3 Print Most print settings are automatically handled by the software application. Change the settings manually only when you want to change print quality, print on specific types of paper, or use special features. For more information about selecting the best print paper for your documents, see Paper basics on page 20. Choose a print job to continue: Print documents on page 42 Print on envelopes on page 43 Print photos on page 45 ENWW 41 Print documents TIP: This printer includes HP ePrint, a free service from HP that allows you to print documents on your HP ePrint-enabled printer anytime, from any location, without any additional software or printer drivers. For more information, see HP ePrint on page 91. To print from software (Windows) 1. Load paper in the tray. For more information, see Load paper on page 23. 2. From your software, select Print. 3. Make sure your printer is selected. 4. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences. 5. Select the appropriate options. ● On the Layout tab, select Portrait or Landscape orientation. ● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray Selection area, and then select the appropriate print quality in the Quality Settings area. ● Click the Advanced button, in the Paper/Output area, select the appropriate paper size from the Paper Size drop-down list. For more printing options, see Tips for print success on page 49. 6. Click OK to close the Properties dialog box. 7. Click Print or OK to begin printing. To print from software (OS X) 1. Load paper in the tray. For more information, see Load paper on page 23. 2. From the File menu in your software, choose Print. 3. Make sure your printer is selected. 4. Specify the page properties. Do the following if you do not see options on the Print dialog. ● OS X v10.6: Click the blue disclosure triangle next to the Printer selection to access the print options. ● OS X Lion and Mountain Lion: Click Show Details to access the print options. NOTE: The following options are available for your printer. Locations for the options can vary from one application to another. 5. 42 ● Choose the paper size. ● Select the orientation. ● Enter the scaling percentage. Click Print. Chapter 3 Print ENWW Print on envelopes Avoid envelopes with the following characteristics: ● Very slick finish ● Self-stick adhesives, clasps, or windows ● Thick, irregular, or curled edges ● Areas that are wrinkled, torn, or otherwise damaged Make sure the folds of envelopes you load in the printer are sharply creased. NOTE: For more information about printing on envelopes, see the documentation available with the software program you are using. To print envelopes (Windows) 1. Load envelopes print-side down in the tray. For more information, see Load paper on page 23. 2. On the File menu in your software, click Print. 3. Make sure your printer is selected. 4. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences. 5. Select the appropriate options. ● On the Layout tab, select Portrait or Landscape orientation. ● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray Selection area, and then select the appropriate print quality in the Quality Settings area. ● Click the Advanced button, in the Paper/Output area, select the appropriate paper size from the Paper Size drop-down list. For more printing options, see Tips for print success on page 49. 6. Click OK, and then click Print or OK in the Print dialog box. To print envelopes (OS X) 1. Load envelopes print-side down in the tray. For more information, see Load paper on page 23. 2. From the File menu in your software, choose Print. 3. Make sure your printer is selected. 4. Set the print options. Do the following if you do not see options on the Print dialog. ● OS X v10.6: Click the blue disclosure triangle next to the Printer selection to access the print options. ● OS X Lion and Mountain Lion: Click Show Details to access the print options. NOTE: The following options are available for your printer. Locations for the options can vary from one application to another. ENWW Print on envelopes 43 5. 44 a. Select the appropriate envelope size from the Paper Size pop-up menu. b. From the pop-up menu, choose Paper Type/Quality, and verify the paper type setting is set to Plain Paper. Click Print. Chapter 3 Print ENWW Print photos Do not leave unused photo paper in the input tray. The paper might start to curl, which could impair the quality of your printout. Photo paper should be flat before printing. TIP: This printer includes HP ePrint, a free service from HP that allows you to print documents on your HP ePrint-enabled printer anytime, from any location, and without any additional software or printer drivers. For more information, see HP ePrint on page 91. To print a photo from the computer (Windows) 1. Load paper in the tray. For more information, see Load paper on page 23. 2. From your software, select Print. 3. Make sure your printer is selected. 4. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences. 5. Select the appropriate options. ● On the Layout tab, select Portrait or Landscape orientation. ● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray Selection area, and then select the appropriate print quality in the Quality Settings area. ● Click the Advanced button, in the Paper/Output area, select the appropriate paper size from the Paper Size drop-down list. For more printing options, see Tips for print success on page 49. NOTE: For maximum dpi resolution, go to Paper/Quality tab, select Photo Paper from the Media drop-down list, and then select Best in the Quality Settings area. Then click the Advanced button and select Yes from the Print in Max DPI drop-down list. If you want to print max DPI in grayscale, select High Quality Grayscale from the Print in Grayscale drop-down list. 6. Click OK to return to the Properties dialog box. 7. Click OK, and then click Print or OK in the Print dialog box. NOTE: After the printing is finished, remove unused photo paper from the input tray. Store the photo paper so it does not start to curl, which could reduce the quality of your printout. To print a photo from the computer (OS X) 1. Load paper in the tray. For more information, see Load paper on page 23. 2. From the File menu in your software, choose Print. 3. Make sure your printer is selected. 4. Set the print options. Do the following if you do not see options on the Print dialog. ENWW ● OS X v10.6: Click the blue disclosure triangle next to the Printer selection to access the print options. ● OS X Lion and Mountain Lion: Click Show Details to access the print options. Print photos 45 NOTE: The following options are available for your printer. Locations for the options can vary from one application to another. 5. a. Choose the appropriate paper size in the Paper Size pop-up menu. b. Select an Orientation. c. From the pop-up menu, choose Paper Type/Quality, and then choose the following settings: ● Paper Type: The appropriate photo paper type ● Quality: Best or Maximum dpi ● Click the Color Options disclosure triangle, and then choose the appropriate Photo Fix option. ◦ Off: applies no changes to the image. ◦ Basic: automatically focuses the image; moderately adjusts image sharpness. Select any other print settings you want, and then click Print. Print photos from a memory card You can connect a USB flash drive (such as a keychain drive or portable hard drive) to the USB port on the front of the printer. For more information about using memory devices, see Insert a USB flash drive on page 29. CAUTION: Attempting to remove a memory device while it is being accessed can damage files on the memory device. You can safely remove a memory card only when the status light is not blinking. 46 1. Insert a USB flash drive into the front USB port. 2. From the control panel display, touch Print Photos. 3. Touch View & Print to display photos. 4. Touch a photo that you want to print, and then touch Select. 5. Scroll up or down to specify the number of photos to print. 6. Touch Edit to select options to edit the selected photos. You can rotate, crop a photo, or turn Photo Fix or Red Eye Removal on and off. 7. Touch Done and touch Continue to preview the selected photo. If you wish to adjust layout or paper type, touch Settings, and then touch your selection. You can also save any new settings as defaults. 8. Touch Print to begin printing. Chapter 3 Print ENWW Print using the maximum dpi Use the maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper. Printing in maximum dpi takes longer than printing with other settings and requires a large amount of memory. To print in maximum dpi mode (Windows) 1. From your software, select Print. 2. Make sure your printer is selected. 3. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences. 4. Click the Paper/Quality tab. 5. From the Media drop-down list, select a media type from the available list. ● HP Premium Plus Photo Papers ● HP Advanced Photo Papers 6. Click the Advanced button. 7. In the Printer Features area, select Yes from the Print in Max DPI drop-down list. 8. Select the appropriate paper size from the Paper Size drop-down list. 9. Click OK to close the advanced options. 10. Confirm Orientation on the Layout tab, and then click OK to print. To print using maximum dpi (OS X) 1. From the File menu in your software, choose Print. 2. Make sure your printer is selected. 3. Set the print options. Do the following if you do not see options on the Print dialog. ● OS X v10.6: Click the blue disclosure triangle next to the Printer selection to access the print options. ● OS X Lion and Mountain Lion: Click Show Details to access the print options. NOTE: The following options are available for your printer. Locations for the options can vary from one application to another. 4. ENWW a. Choose the appropriate paper size in the Paper Size pop-up menu. b. From the pop-up menu, choose Paper Type/Quality, and then choose the following settings: ● Paper Type: The appropriate photo paper type ● Quality: Best or Maximum dpi Select any other print settings that you want, and then click Print. Print using the maximum dpi 47 Print on both sides (duplexing) You can print on both sides of a sheet of paper automatically using the automatic two-sided printing accessory (duplexer). NOTE: Two-sided printing requires an automatic two-sided printing accessory (duplexer) to be installed on the printer. NOTE: You can perform manual duplexing by first printing only the odd pages, flipping the pages over, and then printing only the even pages. To print on both sides of the page (Windows) 1. From your software, select Print. 2. Make sure your printer is selected. 3. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences. 4. Select the appropriate options. ● On the Layout tab, select Portrait or Landscape orientation. ● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray Selection area, and then select the appropriate print quality in the Quality Settings area. ● Click the Advanced button, in the Paper/Output area, select the appropriate paper size from the Paper Size drop-down list. For more printing options, see Tips for print success on page 49. 5. On the Layout tab, select Flip on Long Edge or Flip on Short Edge from the Print on Both Sides drop-down list. 6. Click OK to print. NOTE: After one page of the document is printed, you are prompted to wait for a few seconds. Then the printer automatically reloads the paper back to print on the other side. You do not need to manually reload the paper. To print on both sides of the page (OS X) 48 1. From the File menu in your software, choose Print. 2. In the Print dialog, choose Layout from the pop-up menu. 3. Choose the type of binding you want for your two-sided pages, and then click Print. Chapter 3 Print ENWW Tips for print success For good printing experience, HP ink cartridges should be correctly installed, have sufficient ink, and working properly; and paper should be properly loaded with correct print settings. Ink tips ● If the print quality is not acceptable, see Solve printing problems on page 131 for more information. ● Use Original HP ink cartridges. ● Install both the black and color cartridges correctly. For more information, see Replace the ink cartridges on page 99. ● Check the estimated ink levels in the cartridges to make sure there is sufficient ink. For more information, see Check the estimated ink levels on page 97. ● Always turn off the printer with (the Power button) to allow the printer to protect the nozzles. Paper loading tips For more information, also see Load paper on page 23. ● Load a stack of paper (not just one page). All the paper in the stack should be of the same size and type to avoid a paper jam. ● Load paper with the print-side down in the main tray. ● Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn. ● Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the guides do not bend the paper in the tray. Printer settings tips (Windows) ● To change default print settings, click Set Preferences under Print, Scan & Fax in the HP printer software. For more information to open the printer software, see Open the HP printer software (Windows) on page 37. ● To select the number of pages to print per sheet, on the Layout tab of the printer driver, select the appropriate option from the Pages per Sheet drop-down list. ● If you want to change the page orientation, set it in your application interface. ● To view more printing settings, on the Layout or Paper/Quality tab of the printer driver, click the Advanced button to open the Advanced Options dialog box. ◦ Print in Grayscale: Allows you to print a black and white document using the black ink only. Select Black Ink Only, and then click the OK button. ◦ Pages per Sheet Layout: Helps you specify the order of the pages if you print document in more than two pages per sheet. NOTE: The preview on the Layout tab cannot reflect what you select from the Pages per Sheet Layout drop-down list. ENWW Tips for print success 49 ◦ Borderless Printing: Select this feature to print photos without border. Not all paper types support this feature. You will see an alert icon beside the option if the selected paper type in the Media drop-down list does not support it. ◦ Preserve Layout: This feature only works with the duplex printing. If the image is larger than the printable area, select this feature to scale the page content to be within the smaller margins so that extra pages are not created. ◦ HP Real Life Technologies: This feature smooths and sharpens images and graphics for improved print quality. ◦ Booklet: Allows you to print multiple-page document as a booklet. It places two pages on each side of a sheet that can then be folded into a booklet in half size of the paper. Select a binding method from the drop-down list, and then click OK. ● Booklet-LeftBinding: The binding side after folded into a booklet appears at the left side. Select the option if your reading habit is from left to right. ● Booklet-RightBinding: The binding side after folded into a booklet appears at the right side. Select the option if your reading habit is from right to left. NOTE: The preview on the Layout tab cannot reflect what you select from the Booklet drop-down list. ◦ Page Borders: Allows you to add the borders to the pages if you print the document with two or more pages per sheet. NOTE: The preview on the Layout tab cannot reflect what you select from the Page Borders drop-down list. ● You can use printing shortcut to save setting time. A printing shortcut stores the setting values that are appropriate for a particular kind of job, so that you can set all the options with a single click. To use it, go to the Printing Shortcut tab, select one printing shortcut, and then click OK. To add a new printing shortcut, after making settings on the Layout or Paper/Quality tab, click the Printing Shortcut tab, click Save As and enter a name, and then click OK. To delete a printing shortcut, select it, and then click Delete. NOTE: You cannot delete the default printing shortcuts. Printer settings tips (OS X) 50 ● On the Print dialog, use the Paper Size pop-up menu to select the size of paper loaded in the printer. ● On the Print dialog, choose the Paper Type/Quality pop-up menu and select the appropriate paper type and quality. ● To print a black and white document using only black ink, choose the Paper Type/Quality from the pop-up menu and choose Grayscale from the Color pop-up menu. Chapter 3 Print ENWW Notes ● Original HP ink cartridges are designed and tested with HP printers and papers to help you easily produce great results, time after time. NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased Original HP ink cartridges, go to www.hp.com/go/anticounterfeit. ● Ink level warnings and indicators provide estimates for planning purposes only. NOTE: When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the cartridges until print quality becomes unacceptable. ENWW ● Software settings selected in the print driver only apply to printing, they do not apply to copying or scanning. ● You can print your document on both sides of the paper. Tips for print success 51 52 Chapter 3 Print ENWW 4 ENWW Copy and scan ● Copy ● Scan 53 Copy Using the Copy menu on the printer control panel display, you can easily select the number of copies and color or black-and-white copying. You can also access advanced settings, such as change the paper type and size, adjust the darkness of the copy, or resize the copy. To copy documents 1. Make sure you have paper loaded in the main tray. For more information, see Load paper on page 23. 2. Place your original print-side down on the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. NOTE: If you are copying a photo, place it face down on the scanner glass, as shown by the icon on the edge of the glass. 3. From the printer control panel display, touch Copy. 4. Scroll up or down to select the number of copies. TIP: To save these settings as defaults for future jobs, from the printer control panel display, touch Copy, touch or Settings, and then touch Set As New Defaults. 5. Touch Black or Color to start the copy job. NOTE: If you have a color original, selecting Black produces a black-and-white copy, while selecting Color produces a full-color copy. More copy settings You can customize copy jobs using the various settings available from the printer control panel. In the Copy menu, touch 54 ● Number of Copies ● Paper Size ● Paper Type ● Tray Selection ● HP Copy Fix ● Two-Sided ● ID Copy ● Quality ● Preview and Edit ● Lighter/Darker ● Resize ● Collate ● Margin Shift Chapter 4 Copy and scan or Settings and change the desired settings. ENWW ENWW ● Enhancements ● Set as New Defaults Copy 55 Scan You can scan documents, photos, and other originals, and send them to a variety of destinations, such as a folder on a computer. Using the HP printer software, you can also scan documents into a format that you can search, copy, paste, and even edit. NOTE: Some scan functions are only available after you have installed the HP printer software. TIP: If you have problems scanning documents, see Solve scan problems on page 137. ● Scan an original ● Scan using Webscan ● Scanning documents as editable text Scan an original Using the Scan menu on the printer control panel display, you can easily select the location of the scanning : ● Scan to a computer ● Scan to a memory device NOTE: The printer must be connected to the computer and be turned on. NOTE: If you are scanning an original from the printer control panel or from your computer using the HP printer software, the printer software provided with the printer must be installed on your computer prior to scanning. In addition, on Windows computers, the printer software must be running prior to scanning. NOTE: When scanning a borderless original, use the scanner glass and not the ADF. Scan to a computer NOTE: To scan to a computer, make sure the feature is enabled. (Windows) Open the HP printer software, go to the Scan section, and then select Manage Scan to Computer. (OS X) If you installed HP Scan, open HP Utility. Under Scan Settings, click Scan to Computer, and ensure that Enable Scan to Computer is selected. To scan an original from the printer control panel 1. Load your original print-side down in the left-rear corner of the scanner glass or in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 56 2. Touch Scan, and then select Computer. 3. Touch a computer that you want to scan to. 4. Choose the type of scan profile you want. 5. Touch Start Scan. Chapter 4 Copy and scan ENWW NOTE: You can also use the HP printer software to scan documents into editable text. For more information, see Scanning documents as editable text on page 58. To scan an original from HP printer software (Windows) 1. Load your original print-side down in the left-rear corner of the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 2. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 3. In the HP printer software, click Scan a Document or Photo under Print, Scan & Fax. 4. Select the type of scan that you want from the shortcut menu and then click Scan. NOTE: If Show Scan Preview is selected, you will be able to make adjustments to the scanned image in the preview screen. 5. Select Save if you want to keep the application open for another scan, or select Done to exit the application. 6. Click Scan and select a scan shortcut. 7. After the scan is saved, a Windows Explorer window will open in the directory where the scan was saved. To scan an original from HP printer software (OS X) 1. Open HP Scan. HP Scan is located in the Applications/Hewlett-Packard folder at the top level of the hard disk. 2. Choose the type of scan profile you want and follow the on-screen instructions. Scan to a memory device You can scan directly to a USB flash drive from the printer control panel without using a computer or the HP printer software. NOTE: To scan documents as editable text, use the printer software. For more information, see Scanning documents as editable text on page 58. To scan an original to a memory device from the printer control panel 1. Load your original print-side down in the left-rear corner of the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 2. Insert a USB flash drive. For more information, see Insert a USB flash drive on page 29. 3. Touch Scan, and then select Memory Device. 4. Make changes to any other scan options, and then touch Start Scan. Scan using Webscan Webscan is a feature of the embedded web server that lets you scan photos and documents from your printer to your computer using a web browser. ENWW Scan 57 This feature is available even if you have not installed the HP printer software on your computer. NOTE: Webscan is turned off and needs to be turned on in the EWS. For more information about how to open the EWS, see Open the embedded web server on page 118. If you cannot find Webscan in the EWS, your network administrator might have turned it off. For more information, contact your network administrator or the person who set up your network. To scan using Webscan NOTE: Scanning using Webscan offers basic scan options. For additional scan options or functionality, scan from the HP printer software. 1. Load your original print-side down on the left-rear corner of the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 2. Open the embedded web server. For more information, see Embedded web server on page 118. 3. Click the Settings tab. 4. In the Security section, click Administrator Settings, and click OK. 5. Select Webscan to enable Webscan. 6. Click Apply and then click OK. 7. Click the Scan tab, click Webscan in the left pane, change any settings, and then click Start Scan. Scanning documents as editable text To be able to edit letters, newspaper clippings, and many other documents, you can use the HP printer software to scan them into a format that you can search, copy, paste, and edit. To scan documents as editable text (Windows) 1. Load your original print-side down in the left-rear corner of the glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 58 2. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 3. In the HP printer software, select Scan a Document or Photo under Print, Scan & Fax. 4. Select the type of editable text: I want to... Follow these steps Extract just the text, without any of the formatting of the original Select the Save as Editable Text (OCR) shortcut from the list, and then select Text (.txt) from the File Type dropdown menu. Chapter 4 Copy and scan ENWW 5. Extract the text, as well as some of the formatting of the original Select the Save as Editable Text (OCR) shortcut from the list, and then select Rich Text (.rtf) from the File Type drop-down menu. Extract the text and make it searchable in PDF readers Select the Save as PDF shortcut from the list, and then select Searchable PDF (.pdf) from the File Type dropdown menu. Click Scan and follow the on-screen instructions. To scan documents as editable text (OS X) 1. Load your original print-side down in the left-rear corner of the glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 2. Open HP Scan. HP Scan is located in the Applications/Hewlett-Packard folder at the top level of the hard disk. 3. 4. Select the type of editable text. I want to... Follow these steps Extract just the text, without any of the formatting of the original Select TXT from the Format pop-up menu. Extract the text, as well as some of the formatting of the original Select RTF from the Format pop-up menu. Extract the text and make it searchable in PDF readers Select Searchable PDF from the Format pop-up menu. Follow the on-screen instructions to complete the scan. Guidelines for scanning documents as editable text To ensure that the software can convert your documents successfully, do the following: ● Make sure the scanner glass or ADF window is clean. During a scan, smudges or dust on the scanner glass or ADF window might be scanned, as well, and can prevent the software from converting the document to editable text. ● Make sure the document is loaded correctly. When scanning documents as editable text from the ADF, the original must be loaded into the ADF with the top forward and print-side up. When scanning from the scanner glass, the original must be loaded with the top facing the left edge of the scanner glass. Also, make sure the document is not skewed. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. ● Make sure the text on the document is clear. To successfully convert the document to editable text, the original must be clear and of high quality. The following conditions can hinder the process: ENWW ◦ The original is wrinkled. ◦ The structure of the document is too complex. ◦ The text is too faint or too small. Scan 59 ● ◦ The text is tightly spaced, or has missing or combined characters, "rn" might appear as "m." ◦ The text is on a colored background. Colored backgrounds can cause images in the foreground to blend too much. Choose the correct type of editable text. Be sure to select a shortcut or preset that allows scanning as editable text. These options use scan settings designed to maximize the quality of your OCR scan. (Windows) Use the Editable Text (OCR) or Save as PDF shortcuts. (OS X) Use the Documents preset. ● 60 Save your file in the correct format. Chapter 4 Copy and scan ENWW 5 Fax You can use the printer to send and receive faxes, including color faxes. You can schedule faxes to be sent at a later time and set up speed-dials to send faxes quickly and easily to frequently used numbers. From the printer control panel, you can also set a number of fax options, resolution, and the contrast between lightness and darkness on the faxes you send. NOTE: Before you begin faxing, make sure you have set up the printer correctly for faxing. You can verify if the fax set up is correct by running the fax setup test from the printer control panel. Learn more about fax setup and test, click here to go online for more information. ENWW ● Send a fax ● Receive a fax ● Set up speed-dial entries ● Change fax settings ● Fax and digital phone services ● Fax over Internet Protocol ● Fax reports 61 Send a fax You can send a fax in a variety of ways. Using the printer control panel, you can send a black-andwhite or color fax. You can also send a fax manually from an attached phone. This allows you to speak with the recipient before sending the fax. This section contains the following topics: ● Send a standard fax ● Send a standard fax from the computer ● Send a fax manually from a phone ● Send a fax using monitor dialing ● Send a fax from memory ● Send a fax to multiple recipients ● Send a fax in Error Correction Mode Send a standard fax You can easily send a single- or multiple-page black-and-white or color fax by using the printer control panel. NOTE: If you need printed confirmation that your faxes were successfully sent, fax confirmation must be enabled. TIP: You can also send a fax manually from a phone or by using monitor dialing. These features allow you to control the pace of your dialing. They are also useful when you want to use a calling card to charge the call and you have to respond to tone prompts while dialing. To send a standard fax from the printer control panel 1. Load your original print-side down in the left-rear corner of the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. NOTE: If you are using the scanner glass, ensure that the automatic document feeder is empty. Otherwise, the printer will sense the document in the ADF instead of the paper on the scanner glass. 2. From the printer control panel display, touch Fax. 3. Enter the fax number by using the keypad. TIP: To add a pause in the fax number you are entering, touch * repeatedly, until a dash (-) appears on the display. 4. Touch Black or Color. If the printer detects an original loaded in the automatic document feeder, it sends the document to the number you entered. TIP: If the recipient reports issues with the quality of the fax you sent, you can try changing the resolution or contrast of your fax. 62 Chapter 5 Fax ENWW Send a standard fax from the computer You can send a document on your computer as a fax, without printing a copy and faxing it from the printer. NOTE: Faxes sent from your computer by this method use the printer fax connection, not your Internet connection or computer modem. Therefore, make sure the printer is connected to a working telephone line and that the fax function is set up and functioning correctly. To use this feature, you must install the printer software using the installation program provided on the HP software CD provided with the printer. To send a standard fax from the computer (Windows) 1. Open the document on your computer that you want to fax. 2. On the File menu in your software application, click Print. 3. From the Name list, select the printer that has “fax” in the name. 4. To change settings (such as selecting to send the document as a black fax or a color fax), click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences. 5. After you have changed any settings, click OK. 6. Click Print or OK. 7. Enter the fax number and other information for the recipient, change any further settings for the fax, and then click Send Fax. The printer begins dialing the fax number and faxing the document. Send a standard fax from the computer (OS X) 1. Open the document on your computer that you want to fax. 2. From the File menu in your software, click Print. 3. Select the printer that has “(Fax)” in the name. 4. Select Fax Recipients from the pop-up menu below the Orientation setting. NOTE: If you cannot find the pop-up menu, try clicking the disclosure triangle next to the Printer selection. 5. Enter the fax number and other information in the boxes provided, and then click Add to Recipients. 6. Select the Fax Mode and any other fax options you want, and then click Send Fax Now to begin dialing the fax number and faxing the document. Send a fax manually from a phone Sending a fax manually allows you to make a phone call and talk with the recipient before you send the fax. This is useful if you want to inform the recipient that you are going to send them a fax before sending it. When you send a fax manually, you can hear the dial tones, telephone prompts, or other sounds through the handset on your telephone. This makes it easy for you to use a calling card to send your fax. Depending on how the recipient has their fax machine set up, the recipient might answer the phone, or the fax machine might take the call. If a person answers the phone, you can speak with the ENWW Send a fax 63 recipient before sending the fax. If a fax machine answers the call, you can send the fax directly to the fax machine when you hear the fax tones from the receiving fax machine. To send a fax manually from an extension phone 1. Load your original print-side down in the left-rear corner of the scanner glass or print-side up in the ADF. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. NOTE: If you are using the scanner glass, ensure that the automatic document feeder is empty. Otherwise, the printer will sense the document in the ADF instead of the paper on the scanner glass. 2. From the printer control panel display, touch Fax. 3. Dial the number by using the keypad on the phone that is connected to the printer. NOTE: Do not use the keypad on the control panel of the printer when manually sending a fax. You must use the keypad on your phone to dial the recipient's number. 4. If the recipient answers the telephone, you can engage in a conversation before sending your fax. NOTE: If a fax machine answers the call, you will hear fax tones from the receiving fax machine. Proceed to the next step to transmit the fax. 5. When you are ready to send the fax, touch Black or Color. NOTE: If prompted, select Send Fax. If you were on the phone with the recipient, ask the recipient to start receiving the fax when they hear fax tones on the fax machine. The telephone line is silent while the fax is transmitting. At this point, you can hang up the telephone. If you want to continue speaking with the recipient, remain on the line until the fax transmission is complete. Send a fax using monitor dialing Monitor dialing allows you to dial a number from the printer control panel as you would dial a regular telephone. When you send a fax using monitor dialing, you can hear the dial tones, telephone prompts, or other sounds through the speakers on the printer. This enables you to respond to prompts while dialing, as well as control the pace of your dialing. TIP: If you are using a calling card and do not enter your PIN fast enough, the printer might start sending fax tones too soon and cause your PIN not to be recognized by the calling card service. If this is the case, you can create a speed dial entry to store the PIN for your calling card. For more information, see Set up speed-dial entries on page 74. NOTE: Make sure the volume is turned on to hear a dial tone. To send a fax using monitor dialing from the printer control panel 1. Load your original print-side down in the left-rear corner of the scanner glass or in the ADF. For additional information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. 64 Chapter 5 Fax ENWW NOTE: If you are using the scanner glass, ensure that the automatic document feeder is empty. Otherwise, the printer will sense the document in the ADF instead of the paper on the scanner glass. 2. From the printer control panel display, touch Fax. 3. Touch Black or Color. ● If the printer detects an original loaded in the automatic document feeder, you hear a dial tone. ● If the original is loaded on the scanner glass, select Fax from scanner glass. 4. When you hear the dial tone, enter the number by using the keypad on the printer control panel. 5. Follow any prompts that might occur. TIP: If you are using a calling card to send a fax and you have your calling card PIN stored as a speed dial, when prompted to enter your PIN, touch (Speed dial) to select the speed dial entry where you have your PIN stored. For more information about creating speed-dial entries, see Set up speed-dial entries on page 74. Your fax is sent when the receiving fax machine answers. Send a fax from memory You can scan a black-and-white fax into memory and then send the fax from memory. This feature is useful if the fax number you are trying to reach is busy or temporarily unavailable. The printer scans the originals into memory and sends them once it is able to connect to the receiving fax machine. After the printer scans the pages into memory, you can immediately remove the originals from the document feeder tray or scanner glass. NOTE: You can only send a black-and-white fax from memory. To send a fax from memory 1. Load your original print-side down in the ADF. For additional information, see Load an original in the document feeder on page 28. 2. From the printer control panel display, touch Fax. 3. Enter the fax number by using the keypad, touch (Speed dial) to select a speed dial, or touch (Call history) to select a previously dialed or received number. For more information about creating speed-dial entries, see Set up speed-dial entries on page 74. 4. Touch Black or Color. The printer scans the originals into memory and sends the fax when the receiving fax machine is available. Send a fax to multiple recipients You can send a fax to multiple recipients at once by grouping individual speed dial entries into group speed dial entries. ENWW Send a fax 65 To send a fax to multiple recipients using group speed dial 1. Load your original print-side down in the left-rear corner of the scanner glass or in the ADF. For additional information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. NOTE: If you are using the scanner glass, ensure that the automatic document feeder is empty. Otherwise, the printer will sense the document in the ADF instead of the paper on the scanner glass. 2. From the printer control panel display, touch Fax and touch then 3. Touch 4. Touch Group Speed Dial and follow the on-screen instruction to create a recipient group. 5. Touch the recipient group from the Select Speed Dial screen. 6. Touch Start Fax. (Speed dial). (Setup). If the printer detects an original loaded in the automatic document feeder, it sends the document to each number in the group speed dial entry. NOTE: You can only use group speed dial entries to send faxes in black and white, because of memory limitations. The printer scans the fax into memory then dials the first number. When a connection is made, it sends the fax and dials the next number. If a number is busy or not answering, the printer follows the settings for Busy Redial and No Answer Redial. If a connection cannot be made, the next number is dialed and an error report is generated. For more information about change the redial options, see Set the redial options on page 79. Send a fax in Error Correction Mode Error Correction Mode (ECM) prevents loss of data due to poor phone lines by detecting errors that occur during transmission and automatically requesting retransmission of the erroneous portion. Phone charges are unaffected, or might even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably. The default setting is On. Turn ECM off only if it increases phone charges substantially, and if you can accept poorer quality in exchange for reduced charges. Before turning the ECM setting off, consider the following. If you turn ECM off: ● The quality and transmission speed of faxes you send and receive are affected. ● The Fax Speed is automatically set to Medium. ● You can no longer send or receive faxes in color. To change the ECM setting from the control panel 66 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Advanced Fax Setup. 4. Touch Error Correction Mode to turn on or off. 5. Select On or Off. Chapter 5 Fax ENWW Receive a fax You can receive faxes automatically or manually. If you turn off the Auto Answer option, you must receive faxes manually. If you turn on the Auto Answer option (the default setting), the printer automatically answers incoming calls and receives faxes after the number of rings that are specified by the Rings to Answer setting. (The default Rings to Answer setting is five rings.) If you receive a Legal-size or larger fax and the printer is not currently set to use Legal-size paper, the printer reduces the fax so that it fits on the paper that is loaded. If you have disabled the Automatic Reduction feature, the printer prints the fax on two pages. NOTE: If you are copying a document when a fax arrives, the fax is stored in the printer memory until the copying finishes. This can reduce the number of fax pages stored in memory. ● Receive a fax manually ● Set up backup fax ● Reprint received faxes from memory ● Forward faxes to another number ● Set the paper size for received faxes ● Set automatic reduction for incoming faxes ● Block unwanted fax numbers ● Receive faxes using HP Digital Fax Receive a fax manually When you are on the phone, the person you are speaking with can send you a fax while you are still connected. This is referred to as manual faxing. Use the instructions in this section to receive a manual fax. NOTE: You can pick up the handset to talk or listen for fax tones. You can receive faxes manually from a phone that is: ● Directly connected to the printer (on the 2-EXT port) ● On the same phone line, but not directly connected to the printer To receive a fax manually ENWW 1. Make sure the printer is turned on and you have paper loaded in the main tray. 2. Remove any originals from the document feeder tray. 3. Set the Rings to Answer setting to a high number to allow you to answer the incoming call before the printer answers. Or, turn off the Auto Answer setting so that the printer does not automatically answer incoming calls. 4. If you are currently on the phone with the sender, instruct the sender to press Start on their fax machine. 5. When you hear fax tones from a sending fax machine, do the following: a. From the printer control panel display, touch Fax, and then select Black or Color. b. After the printer begins to receive the fax, you can hang up the phone or remain on the line. The phone line is silent during fax transmission. Receive a fax 67 Set up backup fax Depending on your preference and security requirements, you can set up the printer to store all the faxes it receives, only the faxes it receives while the printer is in an error condition, or none of the faxes it receives. To set backup fax from the printer control panel 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Advanced Fax Setup. 4. Touch Backup Fax Reception. 5. Touch the required setting. On The default setting. When Backup fax is On, the printer stores all received faxes in memory. This enables you to reprint up to 30 of the most recently printed faxes if they are still saved in memory. NOTE: When printer memory is low, it overwrites the oldest, printed faxes as it receives new faxes. If the memory becomes full of unprinted faxes, the printer stops answering incoming fax calls. NOTE: If you receive a fax that is too large, such as a very detailed color photo, it might not be stored in memory due to memory limitations. On Error Only Causes the printer to store faxes in memory only if an error condition exists that prevents the printer from printing the faxes (for example, if the printer runs out of paper). The printer continues to store incoming faxes as long as there is memory available. (If the memory becomes full, the printer stops answering incoming fax calls.) When the error condition is resolved, the faxes stored in memory print automatically, and then they are deleted from memory. Off Faxes are never stored in memory. For example, you might want to turn off Backup fax for security purposes. If an error condition occurs that prevents the printer from printing (for example, the printer runs out of paper), the printer stops answering incoming fax calls. Reprint received faxes from memory The received faxes, which are not printed out, are stored in memory. NOTE: After the memory becomes full, the printer cannot receive the new fax until you print or delete the faxes from memory. You might also want to delete the faxes in memory for security or privacy purposes. Depending on the sizes of the faxes in memory, you can reprint up to eight of the most recently printed faxes, if they are still in memory. For example, you might need to reprint your faxes if you lost the copy of your last printout. To reprint faxes in memory from the printer control panel 68 1. Make sure you have paper loaded in the main tray. For more information, see Load paper on page 23. 2. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 3. Touch Fax Setup. 4. Touch Fax Tools. Chapter 5 Fax ENWW 5. Touch Reprint Faxes in Memory. The faxes are printed in the reverse order from which they were received with the most recently received fax printed first, and so on. 6. If you want to stop reprinting the faxes in memory, touch (Cancel). Forward faxes to another number You can set up the printer to forward your faxes to another fax number. If fax forwarding function is enbabled, your printer can receive and forward the black-and-white faxes only. A received color fax is forwarded in black and white. HP recommends that you verify the number you are forwarding to is a working fax line. Send a test fax to make sure the fax machine is able to receive your forwarded faxes. To forward faxes from the printer control panel 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Advanced Fax Setup. 4. Touch Fax Forwarding. 5. Touch On (Print and Forward) to print and forward the fax, or select On (Forward) to forward the fax. NOTE: If the printer is not able to forward the fax to the designated fax machine (for example, if it is not turned on), the printer prints the fax. If you set up the printer to print error reports for received faxes, it also prints an error report. 6. At the prompt, enter the number of the fax machine intended to receive the forwarded faxes, and then touch Done. Enter the required information for each of the following prompts: start date, start time, end date, and end time. 7. Fax forwarding is activated. Touch OK to confirm. If the printer loses power when fax forwarding is set up, it saves the fax forwarding setting and phone number. When the power is restored to the printer, the fax forwarding setting is still On. NOTE: You can cancel fax forwarding by selecting Off from the Fax Forwarding menu. Set the paper size for received faxes You can select the paper size for received faxes. The paper size you select should match what is loaded in your main tray. Faxes can be printed on Letter, A4, or Legal paper only. NOTE: If an incorrect paper size is loaded in the main tray when you receive a fax, the fax does not print and an error message appears on the display. Load Letter, A4, or Legal paper, and then touch OK to print the fax. To set the paper size for received faxes from the printer control panel ENWW 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. Receive a fax 69 3. Touch Basic Fax Setup. 4. Touch Fax Paper Size, and then touch an option. Set automatic reduction for incoming faxes The Automatic Reduction setting determines what the printer does if it receives a fax that is too large for the default paper size. This setting is turned on by default, so the image of the incoming fax is reduced to fit on one page, if possible. If this feature is turned off, information that does not fit on the first page is printed on a second page. Automatic Reduction is useful when you receive a Legal-size fax and Letter-size paper is loaded in the main tray. To set automatic reduction from the printer control panel 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Advanced Fax Setup. 4. Touch Automatic Reduction to turn on or off. Block unwanted fax numbers If you subscribe to a caller ID service through your phone provider, you can block specific fax numbers so the printer does not print faxes received from those numbers. When an incoming fax call is received, the printer compares the number to the list of junk fax numbers to determine if the call should be blocked. If the number matches a number in the blocked fax numbers list, the fax is not printed. (The maximum number of fax numbers you can block varies by model.) NOTE: This feature is not supported in all countries/regions. If it is not supported in your country/ region, Junk Fax Blocker Setup does not appear in the Fax Options or Fax Settings menu. NOTE: If no phone numbers are added in the Caller ID list, it is assumed that you are not subscribed to a Caller ID service. ● Add numbers to the junk fax list ● Remove numbers from the junk fax list ● Print a Junk Fax Report Add numbers to the junk fax list You can block specific numbers by adding them to the junk fax list. To add a number to the junk fax list 70 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Basic Fax Setup. 4. Touch Junk Fax Blocker Setup. 5. A message appears stating that Caller ID is required to block junk faxes. Touch OK to continue. 6. Touch Add Numbers. Chapter 5 Fax ENWW 7. To select a fax number to block from the caller ID list, touch Select from Caller ID History. - or To manually enter a fax number to block, touch Enter new number. 8. After entering a fax number to block, touch Done, and then touch OK. NOTE: Make sure you enter the fax number as it appears on the control panel display, and not the fax number that appears on the fax header of the received fax, as these numbers can be different. Remove numbers from the junk fax list If you no longer want to block a fax number, you can remove a number from your junk fax list. To remove numbers from the list of junk fax numbers 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Basic Fax Setup. 4. Touch Junk Fax Blocker Setup. 5. Touch Remove Numbers. 6. Touch the number you want to remove, and then touch OK. Print a Junk Fax Report Use the following procedure to print a list of blocked junk fax numbers. To print a Junk Fax Report 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Settings and touch Fax Setup. 3. Touch Basic Fax Setup. 4. Touch Junk Fax Blocker Setup. 5. Touch Print Reports, and then touch Junk Fax List. Receive faxes using HP Digital Fax If the printer is connected to your computer with an Ethernet cable, wireless connection, or USB cable, you can use HP Digital Fax to automatically receive faxes and save faxes directly to your Email box or your network folder that you specify. With HP digital Fax, you can store digital copies of your faxes easily and also eliminate the hassle of dealing with bulky paper files. Received faxes are saved as TIFF (Tagged Image File Format). The files are named in the following method: XXXX_YYYYYYYY_ZZZZZZ.tif, where X is the sender's information, Y is the date, and Z is the time that the fax was received. NOTE: HP digital Fax is available for receiving black-and-white faxes only. Color faxes will be printed. ENWW Receive a fax 71 ● HP Digital Fax requirements ● Activate HP Digital Fax ● Modify HP Digital Fax settings HP Digital Fax requirements ● The destination folder of the computer or server must be on at all times. The destination computer must also be awake, faxes will not be saved if the computer is asleep or in hibernate mode. ● Paper must be loaded in the input tray. For more information, see Load paper on page 23. Activate HP Digital Fax To set up HP Digital Fax (Windows) 1. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 2. In the HP printer software, click Digital Fax Setup Wizard under Print, Scan & Fax. 3. Follow the on-screen instructions. To set up HP Digital Fax (OS X) 1. Open HP Utility. For more information, see HP Utility (OS X) on page 117. 2. Select the printer. 3. Click Digital Fax Archive in the Fax Settings section. Modify HP Digital Fax settings You can turn off HP Digital Fax and disable printing faxes from the printer control panel. To modify settings from the printer control panel 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Basic Fax Setup, and then touch HP Digital Fax. 4. Select the setting that you want to change. You can change the following settings: ● Fax Print: Choose this option to print faxes as they are received. If you turn off printing, color faxes will still print. ● Disable HP Digital Fax: Turn off HP Digital Fax. NOTE: Use the HP printer software on your computer to turn on HP Digital Fax. To modify settings from the HP printer software (Windows) 72 1. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 2. In the HP printer software, click Digital Fax Setup Wizard under Print, Scan & Fax. 3. Follow the on-screen instructions. Chapter 5 Fax ENWW To modify settings from the HP printer software (OS X) 1. Open HP Utility. For more information, see HP Utility (OS X) on page 117. 2. Select the printer. 3. Click Digital Fax Archive in the Fax Settings section. Turn off HP Digital Fax ENWW 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Basic Fax Setup and then touch HP Digital Fax. 4. Touch Disable HP Digital Fax. 5. Touch Yes. Receive a fax 73 Set up speed-dial entries You can set up frequently used fax numbers as speed-dial entries. This lets you dial those numbers quickly by using the printer control panel. TIP: In addition to creating and managing speed-dial entries from the printer control panel, you can also use tools available on your computer, such as the HP software included with the printer and the printer EWS. For more information, see Printer management tools on page 115. ● Set up and change speed-dial entries ● Set up and change group speed-dial entries ● Delete speed-dial entries ● Print a list of speed-dial entries Set up and change speed-dial entries You can store fax numbers as speed-dial entries. To set up speed-dial entries 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Speed Dial Setup. 4. Touch Add/Edit Speed Dial, and then touch an unused entry number. 5. Type the fax number, and then touch Next. NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix. 6. Type the name for the speed-dial entry, and then touch Done. 7. Touch OK. To change speed-dial entries 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Speed Dial Setup. 4. Touch Add/Edit Speed Dial, and then touch the speed-dial entry you want to change. 5. If you want to change the fax number, type the new number, and then touch Next. NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix. 74 6. Type the name for the speed-dial entry, and then touch Done. 7. Touch OK. Chapter 5 Fax ENWW Set up and change group speed-dial entries You can store groups of fax numbers as group speed-dial entries. To set up group speed-dial entries NOTE: Before you can create a group speed-dial entry, you must have already created at least one speed-dial entry. 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Speed Dial Setup. 4. Touch Group Speed Dial, and then touch an unused entry number. 5. Touch the speed-dial entries you want to include in the group speed-dial entry, and then touch OK. 6. Type the name for the speed-dial entry, and then touch Done. To change group speed-dial entries 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then select Speed Dial Setup. 3. Select Group Speed Dial, and then touch the entry you want to change. 4. If you want to add or change speed-dial entries from the group, touch the speed-dial entries you want to include or those you want to change, and then touch OK. 5. If you want to change the name of the group speed-dial, type the new name, and then touch Done. To change speed-dial entries 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Speed Dial Setup. 4. Touch Add/Edit Speed Dial, and then touch the speed-dial entry you want to change. 5. If you want to change the fax number, type the new number, and then touch Next. NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix. 6. Type the name for the speed-dial entry, and then touch Done. 7. Touch OK. Delete speed-dial entries To delete speed-dial entries or group speed-dial entries, complete the following steps: ENWW Set up speed-dial entries 75 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Speed Dial Setup. 3. Touch Delete Speed Dial, touch the entry you want to delete, touch Delete, and then touch Yes to confirm. NOTE: Deleting a group speed-dial entry does not delete the individual speed-dial entries. Print a list of speed-dial entries To print a list of all of the speed-dial entries that have been set up, complete the following steps: 76 1. Load paper in the tray. For more information, see Load paper on page 23. 2. From the printer control panel, touch Setup. 3. Touch Fax Setup, and then touch Speed Dial Setup. 4. Touch Print Speed Dial List. Chapter 5 Fax ENWW Change fax settings After completing the steps in the getting started guide that came with the printer, use the following steps to change the initial settings or to configure other options for faxing. ● Configure the fax header ● Set the answer mode (Auto answer) ● Set the number of rings before answering ● Change the answer ring pattern for distinctive ring ● Set the dial type ● Set the redial options ● Set the fax speed ● Set the fax sound volume Configure the fax header The fax header prints your name and fax number on the top of every fax you send. HP recommends that you set up the fax header by using the HP printer software provided with the printer. You can also set up the fax header from the printer control panel, as described here. NOTE: In some countries/regions, the fax header information is a legal requirement. To set or change the fax header 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Basic Fax Setup. 3. Touch Fax Header. 4. Enter your personal or company name, and then touch Done. 5. Enter your fax number, and then touch Done. Set the answer mode (Auto answer) The answer mode determines whether the printer answers incoming calls. ● Turn on the Auto Answer setting if you want the printer to answer faxes automatically. The printer answers all incoming calls and faxes. ● Turn off the Auto Answer setting if you want to receive faxes manually. You must be available to respond in person to the incoming fax call or else the printer does not receive faxes. To set the answer mode ENWW 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Basic Fax Setup. 3. Touch Auto Answer to turn it on or off. Change fax settings 77 Set the number of rings before answering If you turn on the Auto Answer setting, you can specify how many rings occur before incoming calls are automatically answered. The Rings to Answer setting is important if you have an answering machine on the same phone line as the printer, because you want the answering machine to answer the phone before the printer does. The number of rings to answer for the printer should be greater than the number of rings to answer for the answering machine. For example, set your answering machine to a low number of rings and the printer to answer in the maximum number of rings. (The maximum number of rings varies by country/region.) In this setup, the answering machine answers the call and the printer monitors the line. If the printer detects fax tones, it receives the fax. If the call is a voice call, the answering machine records the incoming message. To set the number of rings before answering 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Basic Fax Setup. 3. Touch Rings to Answer. 4. Touch the number of rings. 5. Touch Done to accept the setting. Change the answer ring pattern for distinctive ring Many phone companies offer a distinctive ring feature that allows you to have several phone numbers on one phone line. When you subscribe to this service, each number is assigned a different ring pattern. You can set up the printer to answer incoming calls that have a specific ring pattern. If you connect the printer to a line with distinctive ring, have your telephone company assign one ring pattern to voice calls and another ring pattern to fax calls. HP recommends that you request double or triple rings for a fax number. When the printer detects the specified ring pattern, it answers the call and receives the fax. TIP: You can also use the Ring Pattern Detection feature in the printer control panel to set distinctive ring. With this feature, the printer recognizes and records the ring pattern of an incoming call and, based on this call, automatically determines the distinctive ring pattern assigned by your telephone company to fax calls. If you do not have a distinctive ring service, use the default ring pattern, which is All Rings. NOTE: The printer cannot receive faxes when the main phone number is off the hook. To change the answer ring pattern for distinctive ring 78 1. Verify that the printer is set to answer fax calls automatically. 2. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 3. Touch Fax Setup, and then select Advanced Fax Setup. 4. Touch Distinctive Ring. Chapter 5 Fax ENWW 5. A message appears stating that this setting should not be changed unless you have multiple numbers on the same telephone line. Touch Yes to continue. 6. Do one of the following: ● Touch the ring pattern assigned by your telephone company to fax calls. - Or - ● Touch Ring Pattern Detection, and then follow the instructions on the printer control panel. NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the feature before it finishes, the ring pattern is automatically set to the default, which is All Rings. NOTE: If you are using a PBX phone system that has different ring patterns for internal and external calls, you must call the fax number from an external number. Set the dial type Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not change the setting unless you know that your phone line cannot use tone dialing. NOTE: The pulse-dialing option is not available in all countries/regions. To set the dial type 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Basic Fax Setup. 3. Touch Dial Type. 4. Touch to select Tone Dialing or Pulse Dialing. Set the redial options If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer attempts to redial based on the settings for the busy-redial and no-answer-redial options. Use the following procedure to turn the options on or off. ● Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal. The factory-set default for this option is On. ● No answer redial: If this option is turned on, the printer redials automatically if the receiving fax machine does not answer. The factory-set default for this option is Off. To set the redial options 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Advanced Fax Setup. 3. Touch Busy Redial or No Answer Redial, and then select the appropriate options. Set the fax speed You can set the fax speed used to communicate between your printer and other fax machines when sending and receiving faxes. If you use one of the following, setting the fax speed to a slower speed might be required: ENWW Change fax settings 79 ● An Internet phone service ● A PBX system ● Fax over Internet Protocol (FoIP) ● An integrated services digital network (ISDN) service If you experience problems sending and receiving faxes, try using a lower Fax Speed. The following table provides the available fax speed settings. Fax speed setting Fax speed Fast v.34 (33600 baud) Medium v.17 (14400 baud) Slow v.29 (9600 baud) To set the fax speed 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Advanced Fax Setup. 3. Touch Fax Speed. 4. Touch to select an option. Set the fax sound volume Use this procedure to increase or decrease the volume of the fax sounds. To set the fax sound volume 80 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Basic Fax Setup. 3. Touch Fax Sound Volume. 4. Touch to select Soft, Loud, or Off. Chapter 5 Fax ENWW Fax and digital phone services Many telephone companies provide their customers with digital phone services, such as the following: ● DSL: A Digital subscriber line (DSL) service through your telephone company. (DSL might be called ADSL in your country/region.) ● PBX: A private branch exchange (PBX) phone system. ● ISDN: An integrated services digital network (ISDN) system. ● FoIP: A low-cost phone service that allows you to send and receive faxes with your printer by using the Internet. This method is called Fax over Internet Protocol (FoIP). For more information, see Fax over Internet Protocol on page 82. HP printers are designed specifically for use with traditional analog phone services. If you are in a digital phone environment (such as DSL/ADSL, PBX, or ISDN), you might need to use digital-toanalog filters or converters when setting up the printer for faxing. NOTE: HP does not guarantee that the printer will be compatible with all digital service lines or providers, in all digital environments, or with all digital-to-analog converters. It is always recommended that you discuss with the telephone company directly for the correct setup options based on their line services provided. ENWW Fax and digital phone services 81 Fax over Internet Protocol You might be able to subscribe to a low cost phone service that allows you to send and receive faxes with your printer by using the Internet. This method is called Fax over Internet Protocol (FoIP). You probably use a FoIP service (provided by your telephone company) when you: ● Dial a special access code along with the fax number. ● Have an IP converter box that connects to the Internet and provides analog phone ports for the fax connection. NOTE: You can only send and receive faxes by connecting a phone cord to the port labeled "1LINE" on the printer. This means that your connection to the Internet must be done either through a converter box (which supplies regular analog phone jacks for fax connections) or your telephone company. TIP: Support for traditional fax transmission over any Internet protocol telephone systems are often limited. If you experience problems faxing, try using a slower fax speed or disabling the fax errorcorrection mode (ECM). However, if you turn off ECM, you cannot send and receive color faxes. For more information about changing the fax speed, see Set the fax speed on page 79. For more information about using ECM, see Send a fax in Error Correction Mode on page 66. If you have questions about Internet faxing, contact your Internet faxing services support department or your local service provider for further assistance. 82 Chapter 5 Fax ENWW Fax reports You can set up the printer to print error reports and confirmation reports automatically for each fax you send and receive. You can also manually print system reports as required; these reports provide useful system information about the printer. By default, the printer is set to print a report only if there is a problem sending or receiving a fax. A confirmation message that indicates whether a fax was successfully sent appears briefly on the control panel display after each transaction. NOTE: If the reports are not legible, you can check the estimated ink levels from the control panel or the HP software. For more information, see Check the estimated ink levels on page 97. ● Print fax confirmation reports ● Print fax error reports ● Print and view the fax log ● Clear the fax log ● Print the details of the last fax transaction ● Print a Caller ID Report ● View the Call History Print fax confirmation reports If you require printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On (Fax Send) or On (Send and Receive). The default fax confirmation setting is Off. This means that a confirmation report is not printed for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the control panel display after each transaction. NOTE: You can include an image of the first page of the fax on the Fax Sent Confirmation report if you select On (Fax Send) or On (Send and Receive), and if you scan the fax to send from memory or use the Scan and Fax option. To enable fax confirmation ENWW 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Advanced Fax Setup and touch Fax Confirmation. 4. Touch to select one of the following options. Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting. On (Fax Send) Prints a fax confirmation report for every fax you send. On (Fax Receive) Prints a fax confirmation report for every fax you receive. On (Send and Receive) Prints a fax confirmation report for every fax you send and receive. Fax reports 83 To include an image of the fax on the report 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Advanced Fax Setup and touch Fax Confirmation. 4. Touch On (Fax Send) or On (Send and Receive). 5. Touch Fax Confirmation with image. Print fax error reports You can configure the printer so that it automatically prints a report when there is an error during transmission or reception. To set the printer to print fax error reports automatically 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup. 3. Touch Advanced Fax Setup and touch Fax Error Report. 4. Touch to select one of the following. On (Send and Receive) Prints whenever a fax error occurs. Off Does not print any fax error reports. On (Fax Send) Prints whenever a transmission error occurs. This is the default setting. On (Fax Receive) Prints whenever a receiving error occurs. Print and view the fax log You can print a log of faxes that have been received and sent by the printer. To print the fax log from the printer control panel 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Fax Reports. 3. Touch Fax Log. Clear the fax log Use the following steps to clear the fax log. NOTE: 84 Chapter 5 Fax Clearing the fax log also deletes all faxes stored in memory. ENWW To clear the fax log 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Fax Tools. 3. Touch Clear Fax Log. Print the details of the last fax transaction The Last Fax Transaction report prints the details of the last fax transaction to occur. Details include the fax number, number of pages, and the fax status. To print the Last Fax Transaction report 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Fax Reports. 3. Touch Last Transaction. Print a Caller ID Report Use the following procedure to print a list of Caller ID fax numbers. To print a Caller ID History Report 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Fax Setup, and then touch Fax Reports. 3. Touch Caller ID Report. View the Call History Use the following procedure to view a list of all the calls placed from the printer. NOTE: The call history cannot be printed. You can only view it from the printer control panel display. To view the Call History ENWW 1. From the printer control panel display, touch Fax. 2. Touch (Call history). Fax reports 85 86 Chapter 5 Fax ENWW 6 Web Services The printer offers innovative, web-enabled solutions that can help you quickly access the Internet, obtain documents, and print them faster and with less hassle—and all without using a computer. NOTE: To use these web features, the printer must be connected to the Internet (either using an Ethernet cable or wireless connection). You cannot use these web features if the printer is connected using a USB cable. This section contains the following topics: ENWW ● What are Web Services? ● Set up Web Services ● Use Web Services ● Remove Web Services 87 What are Web Services? The printer includes the following Web Services: ● HP ePrint ● Print apps HP ePrint HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anytime, from any location. It's as simple as sending an email to the email address assigned to your printer when you enable Web Services on the printer. No special drivers or software are needed. If you can send an email, you can print from anywhere, using HP ePrint. Once you have signed up for an account on HP Connected (www.hpconnected.com), you can sign in to view your HP ePrint job status, manage your HP ePrint printer queue, control who can use your printer's HP ePrint email address to print, and get help for HP ePrint. Print apps Print apps allow you to easily locate and print preformatted web content, directly from your printer. You can also scan and store your documents digitally on the Web. Print apps provide a wide range of content, from store coupons to family activities, news, travel, sports, cooking, photos, and many more. You can even view and print your online images from popular photo sites Certain print apps also allow you to schedule the delivery of app content to your printer. Pre-formatted content designed specifically for your printer means no cut-off text and pictures and no extra pages with only one line of text. On some printers, you can also choose paper and print quality settings on the print preview screen. All without even having to turn on your computer! 88 Chapter 6 Web Services ENWW Set up Web Services To set up Web Services, use one of the following methods. NOTE: Before you set up Web Services, make sure your printer is connected to the Internet using either an Ethernet or wireless connection. ● Set up Web Services using the printer control panel ● Set up Web Services using the embedded web server ● Set up Web Services using the HP printer software Set up Web Services using the printer control panel The printer control panel provides an easy way to set up and manage Web Services. To set up Web Services, complete the following steps: 1. Make sure the printer is connected to the Internet using either an Ethernet or wireless connection. 2. From the printer control panel, touch 3. Touch Yes to accept the Web Services terms of use and enable Web Services. 4. In the Auto Update screen, touch Yes to allow the printer to automatically check for and install product updates. (print apps) or (HP ePrint). NOTE: If a printer update is available, the printer will download and install the update, and then restart. You will have to repeat the instructions from step 1 to set up HP ePrint. NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the proxy details, contact your network administrator or the person who set up the network. 5. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup. Set up Web Services using the embedded web server You can use the printer's embedded web server (EWS) to set up and manage Web Services. To set up Web Services, complete the following steps: 1. Open the EWS. For more information, see Embedded web server on page 118. 2. Click the Web Services tab. 3. In the Web Services Settings section, click Setup, click Continue, and follow the on-screen instructions to accept the terms of use. 4. If prompted, choose to allow the printer to check for and install printer updates. NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts. Repeat the instructions from step 1 to set up HP ePrint. ENWW Set up Web Services 89 NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the proxy details, contact your network administrator or the person who set up the network. 5. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup. Set up Web Services using the HP printer software If you did not set up Web Services when you installed the HP software on your computer, you can still use the software to set up Web Services. To set up Web Services (Windows) 1. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 2. In the HP printer software, select ePrint Setup under Print, Scan & Fax. The printer EWS opens. 3. Click the Web Services tab. 4. In the Web Services Settings section, click Setup, click Continue, and follow the on-screen instructions to accept the terms of use. 5. If prompted, choose to allow the printer to check for and install printer updates. NOTE: If a printer update is available, the printer will download and install the update, and then restart. You will have to repeat the instructions from step 1 to set up HP ePrint. 6. 7. If your network uses proxy settings when connecting to the Internet, enter these settings: a. Touch Enter Proxy. b. Enter the proxy server settings, and then touch Done. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup. To set up Web Services (OS X) ▲ 90 To set up and manage Web Services, you can use the printer's embedded web server (EWS). For more information, see Set up Web Services using the embedded web server on page 89. Chapter 6 Web Services ENWW Use Web Services The following section describes how to use and configure Web Services. ● HP ePrint ● Print apps HP ePrint HP ePrint allows you to print to your HP ePrint-enabled printer anytime, from any location. To use HP ePrint, make sure to have the following: ● An Internet- and email-capable computer or mobile device ● An HP ePrint-capable printer on which Web Services has been enabled TIP: For more information about managing and configuring HP ePrint settings and to learn about the latest features, visit HP Connected at www.hpconnected.com. Print using HP ePrint To print documents using HP ePrint, complete the following steps: 1. 2. Enable Web Services. a. From the printer control panel display, touch b. Accept the Terms of Use, and then follow the on-screen instructions to enable Web Services. c. Print the ePrint information page, and then follow the instructions on the page to sign up for an HP ePrint account. (HP ePrint). On your computer or mobile device, open your email application. NOTE: For information about using the email application on your computer or mobile device, see the documentation provided with the application. 3. Create a new email message, and then attach the file that you want to print. 4. Enter the printer's email address in the “To” line of the email message, and then select the option to send the email message. NOTE: The HP ePrint server does not accept email print jobs if there are multiple email addresses included in the "To" or "Cc" fields. Only enter the email address of your HP printer in the "To" field. Do not enter any additional email addresses in the other fields. Find the printer's email address NOTE: Make sure you have created an ePrint account. To sign up for an account on HP Connected, visit HP Connected at www.hpconnected.com. ▲ From the printer control panel display, touch (HP ePrint). To customize the email address, touch Print Info. The printer prints an information page that contains the printer code and instructions on how to customize the email address. ENWW Use Web Services 91 Turn off HP ePrint 1. From the printer control panel, touch 2. Touch ePrint, and then touch Off. NOTE: (HP ePrint), and then touch Settings. To remove all Web Services, see Remove Web Services on page 93. Print apps Print apps allow you to easily locate and print pre-formatted web content, directly from your printer. ● Use print apps ● Manage print apps ● Turn off print apps Use print apps To use the print apps on your printer, touch then touch the print app you want to use. (print apps) on the printer control panel display, and For more information about individual print apps, visit www.hpconnected.com. Manage print apps You can manage your print apps with HP Connected. You can add, configure, or remove print app, and set the order in which they appear on your printer control panel display. NOTE: To manage print app from HP Connected, create an account on HP Connected and add your printer. For more information, visit www.hpconnected.com. Turn off print apps To turn off print apps, complete the following steps: 1. From the printer control panel, touch 2. Touch Apps, and then touch Off. NOTE: 92 (HP ePrint), and then touch Settings. To remove all Web Services, see Remove Web Services on page 93. Chapter 6 Web Services ENWW Remove Web Services To remove Web Services, complete the following steps: 1. From the printer control panel display, touch 2. Touch Remove Web Services. (HP ePrint), and then touch Settings. NOTE: You can also remove Web Services from EWS. To access EWS, see Open the embedded web server on page 118. ENWW Remove Web Services 93 94 Chapter 6 Web Services ENWW 7 Work with ink cartridges To ensure the best print quality from the printer, you need to perform some simple maintenance procedures. TIP: If you have problems copying documents, see Solve printing problems on page 131. This section contains the following topics: ENWW ● Information on ink cartridges and the printhead ● Check the estimated ink levels ● Printing with black or color ink only ● Replace the ink cartridges ● Order ink cartridges ● Store printing supplies ● Anonymous usage information storage 95 Information on ink cartridges and the printhead The following tips help maintain HP ink cartridges and ensure consistent print quality. ● The instructions in this user guide are for replacing ink cartridges, and are not intended for first time installation. ● Keep all ink cartridges in the original sealed packages until they are needed. ● Be sure to turn off the printer properly. For more information, see Turn the printer off on page 38. ● Store ink cartridges at room temperature (15-35° C or 59-95° F). ● Do not clean the printhead unnecessarily. This wastes ink and shortens the life of the cartridges. ● Handle ink cartridges carefully. Dropping, jarring, or rough handling during installation can cause temporary printing problems. ● If you are transporting the printer, do the following to prevent ink leaking from the printer or other damage from occurring to the printer: ◦ (the Power button). Wait until all sounds of Make sure you turn off the printer by pressing internal motion stop before unplugging the printer. For more information, see Turn the printer off on page 38. ◦ Make sure you leave the ink cartridges installed. ◦ The printer must be transported sitting flat; it should not be placed on its side, back, front, or top. CAUTION: HP recommends that you replace any missing cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system. Never turn off the printer when ink cartridges are missing. Related topics ● 96 Check the estimated ink levels on page 97 Chapter 7 Work with ink cartridges ENWW Check the estimated ink levels You can check the estimated ink levels from the printer software or from the printer control panel. For information about using these tools, see Printer management tools on page 115 and Use the printer control panel on page 9. You can also print the Printer Status page to view this information (see Printer status report on page 125). To check the estimated ink levels from the printer control panel 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Tools, and then touch Display Estimated Ink Levels. NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you receive a low-ink alert, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until prompted to do so. NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another printer, the ink level indicator might be inaccurate or unavailable. NOTE: Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the printer and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information, see www.hp.com/go/ inkusage. ENWW Check the estimated ink levels 97 Printing with black or color ink only For regular usage, this product is not designed to print using only the black cartridge when the color cartridges are out of ink. However, your printer is designed to let you print as long as possible when your cartridges start to run out of ink. When there is sufficient ink in the printhead, the printer will offer you the use of black ink only when one or more of the color cartridges are out of ink, and the use of color ink only when the black cartridge is out of ink. ● The amount that you can print using black or color ink only is limited, so have replacement ink cartridges available when you are printing with black or color ink only. ● When there is no longer sufficient ink to print you will get a message that one or more cartridges are depleted, and you will need to replace the depleted cartridges before you resume printing. CAUTION: While ink cartridges are not damaged when left outside of the printer, the printhead does need to have all cartridges installed at all times after the printer is set up and in use. Leaving one or more cartridge slots empty for an extended period may lead to print quality problems and possibly damage the printhead. If you have recently left a cartridge out of the printer for an extended period, or if you have had a recent paper jam, and have noticed poor print quality, clean the printhead. For more information, see Clean the printhead on page 155. 98 Chapter 7 Work with ink cartridges ENWW Replace the ink cartridges NOTE: For information on recycling used ink supplies, see HP inkjet supplies recycling program on page 178. If you do not already have replacement ink cartridges for the printer, see Order ink cartridges on page 101. NOTE: At this time, some portions of the HP web site are available in English only. NOTE: Not all cartridges are available in all countries/regions. CAUTION: HP recommends that you replace any missing cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system. Never turn off the printer when ink cartridges are missing. To replace the ink cartridges Use these steps to replace the ink cartridges. 1. Make sure the printer is turned on. 2. Open the ink cartridge access door. NOTE: Wait until the print carriage stops moving before proceeding. 3. Press the front of the ink cartridge to release it, and then remove it from the slot. 4. Remove the new ink cartridge from its packaging. 5. Using the color-coded letters for help, slide the ink cartridge into the empty slot until it is securely installed in the slot. Make sure that you insert the ink cartridge into the slot that has the same colored letter as the color you are installing. ENWW Replace the ink cartridges 99 6. Repeat steps 3 through 5 for each ink cartridge you are replacing. 7. Close the print-carriage access door. 100 Chapter 7 Work with ink cartridges ENWW Order ink cartridges To order ink cartridges, go to www.hp.com. (At this time, some portions of the HP website are available in English only.) Ordering cartridges online is not supported in all countries/regions. However, many countries have information on ordering by telephone, locating a local store and printing a shopping list. In addition, you can visit the www.hp.com/buy/supplies page to obtain information about purchasing HP products in your country. Use only the replacement cartridges that have the same cartridge number as the ink cartridge you are replacing. You can find the cartridge number in the following places: ● In the embedded web server, by clicking the Tools tab, and then, under Product Information clicking Ink Gauge. For more information, see Embedded web server on page 118. ● On the printer status report (see Printer status report on page 125). ● On the label of the ink cartridge you are replacing. ● On a sticker inside the printer. Open the ink cartridge access door to locate the sticker. NOTE: ENWW The Setup ink cartridge that comes with the printer is not available for separate purchase. Order ink cartridges 101 Store printing supplies Ink cartridges can be left in the printer for extended periods of time. However, to assure optimal ink cartridge health, be sure to turn off the printer properly. For more information, see Turn the printer off on page 38. 102 Chapter 7 Work with ink cartridges ENWW Anonymous usage information storage The HP cartridges used with this printer contain a memory chip that assists in the operation of the printer. In addition, this memory chip stores a limited set of anonymous information about the usage of the printer, which might include the following: the number of pages printed using the cartridge, the page coverage, frequency of printing, and the printing modes used. This information helps HP design future printers to meet our customers' printing needs. The data collected from the cartridge memory chip does not contain information that can be used to identify a customer or user of the cartridge or their printer. HP collects a sampling of the memory chips from cartridges returned to HP's free return and recycling program (HP Planet Partners: www.hp.com/recycle). The memory chips from this sampling are read and studied in order to improve future HP printers. HP partners who assist in recycling this cartridge might have access to this data, as well. Any third party possessing the cartridge might have access to the anonymous information on the memory chip. If you prefer to not allow access to this information, you can render the chip inoperable. However, after you render the memory chip inoperable, the cartridge cannot be used in an HP printer. If you are concerned about providing this anonymous information, you can make this information inaccessible by turning off the memory chip's ability to collect the printer's usage information. To disable the usage information function 1. From the printer control panel, touch and slide your finger across the screen and then touch Setup. 2. Select Tools, and then touch Cartridge Chip Information. 3. Touch OK to disable usage information collection. NOTE: To turn the usage information function on, restore the factory defaults. For more information about how to restore the defaults, see Restore defaults on page 39. NOTE: You can continue to use the cartridge in the HP printer if you turn off the memory chip's ability to collect the printer's usage information. ENWW Anonymous usage information storage 103 104 Chapter 7 Work with ink cartridges ENWW 8 Network setup Additional advanced settings are available from the printer's home page (embedded web server or EWS). For more information, see Embedded web server on page 118. ENWW ● Set up the printer for wireless communication ● Change network settings ● Change from a wireless connection to a USB or Ethernet connection ● Use HP wireless direct 105 Set up the printer for wireless communication ● Before you begin ● Set up the printer on your wireless network ● Change the connection type ● Test the wireless connection ● Turn on or off the wireless capability of the printer NOTE: If you encounter problems connecting the printer, see Unable to connect the printer wirelessly on page 150. TIP: For more information about setting up and using the printer wirelessly, visit the HP Wireless Printing Center (www.hp.com/go/wirelessprinting). Before you begin Ensure the following: ● The printer is not connected to the network using an Ethernet cable. ● The wireless network is set up and working properly. ● The printer and the computers that use the printer are on the same network (subnet). While connecting the printer, you might be prompted to enter the wireless network name (SSID) and a wireless password. ● The wireless network name is the name of your wireless network. ● The wireless password prevents other people from connecting to your wireless network without your permission. Depending on the level of security required, your wireless network might use either a WPA key or WEP passphrase. If you have not changed the network name or the security passkey since setting up your wireless network, you can sometimes find them on the back or side of the wireless router. If you cannot find the network name or the security password or cannot remember this information, see the documentation provided with your computer or with the wireless router. If you still cannot find this information, contact your network administrator or the person who set up the wireless network. Set up the printer on your wireless network Use the Wireless Setup Wizard from the printer control panel display to set up wireless communication. For more information, see Change from an Ethernet connection to a wireless connection on page 107. 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Network Setup. 3. Touch Wireless Settings. 4. Touch Wireless Setup Wizard. 5. Follow the display instructions to complete the setup. 106 Chapter 8 Network setup ENWW If you are already using the printer with a different type of connection, such as a USB connection, follow the instructions in Change the connection type on page 107 to set up the printer on your wireless network. Change the connection type After you have installed the HP printer software and connected the printer to your computer or to a network, you can use the software to change the connection type (for example, from a USB connection to a wireless connection). NOTE: If you are changing to a wireless connection, make sure that an Ethernet cable has not been connected to the printer. Connecting an Ethernet cable turns off the wireless capability of the printer. Also, you might be prompted to temporarily connect a USB cable during the setup process. To change the connection type, do one of the following: ● Change from an Ethernet connection to a wireless connection ● Change from a USB connection to a wireless connection Change from an Ethernet connection to a wireless connection NOTE: Check the prerequisites before you begin. For more information, see Before you begin on page 106. To change from an Ethernet connection to a wireless connection (Windows) 1. Remove the Ethernet cable from the printer. 2. Open the printer software after the installation. For more information, see Open the HP printer software (Windows) on page 37. Run the Wireless Setup Wizard to make the wireless connection. For more information, see Set up the printer on your wireless network on page 106. To change from an Ethernet connection to a wireless connection (OS X) Before you proceed, go through the list at Before you begin on page 106. 1. Connect the printer to your wireless network. 2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software connection to wireless for this printer. Change from a USB connection to a wireless connection NOTE: Check the prerequisites before you begin. For more information, see Before you begin on page 106. To change from a USB connection to a wireless network (Windows) 1. ENWW Depending on your operating system, do one of the following: ● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the printer name, and then click Utilities. ● Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, click the folder of your printer. 2. Click Printer Setup & Software. 3. Select Convert a USB connected printer to wireless. Follow the on-screen instructions. Set up the printer for wireless communication 107 To change from a USB connection to a wireless network (OS X) 1. Connect the printer to your wireless network. 2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software connection to wireless for this printer. Learn more about how to change from a USB to wireless connection. Click here to go online for more information. Test the wireless connection Print the wireless test report for information about the printer wireless connection. The wireless test report provides information about the printer status, hardware (MAC) address, and IP address. If the printer is connected to a network, the test report displays details about the network settings. To print the wireless test report 1. From the printer control panel, touch 2. Touch Print Reports 3. Touch Print Wireless Test Report. (Wireless), and then touch Settings. Turn on or off the wireless capability of the printer The wireless capability of the printer is on by default, as indicated by the blue Wireless light on the printer control panel. If the wireless light is blinking, wireless enable (wireless radio on) but you do not have a wireless connection. If the wireless light is on solid blue, the printer has an active connection to a wireless network. If your printer is connected using an Ethernet, the wireless capability is not used, in this case you might want to turn off the printer wireless capability. NOTE: Connecting an Ethernet cable to the printer automatically turns off the wireless capability and the Wireless light also goes off. 1. From the printer control panel, touch and slide your finger across the screen, touch Setup, and then touch Network Setup. 2. Touch Wireless Settings. 3. Touch Wireless to turn on or turn off the radio. 108 Chapter 8 Network setup ENWW Change network settings From the printer control panel, you can set up and manage your printer wireless connection and perform a variety of network management tasks. This includes viewing and changing network settings, restoring network defaults, and turning the wireless function on or off. ● View and print network settings ● Set link speed ● Change IP settings CAUTION: Network settings are provided for your convenience. However, unless you are an advanced user, you should not change some of these settings (such as the link speed, IP settings, default gateway, and firewall settings). View and print network settings To view or print network settings, use one of the following ways: (Wireless) or (Ethernet). The network status screen ● From the printer control panel, touch is displayed. ● Print the network configuration page. For more information, see Network configuration page on page 126. ● Run the wireless test. For more information, see Step 3: Run the wireless test on page 151. To access the software, see Open the HP printer software (Windows) on page 37. Set link speed You can change the speed at which data is transmitted over the network. The default is Automatic. 1. From the printer control panel, touch and slide your finger across the screen, touch Setup, and then touch Network Setup. 2. Touch Ethernet Settings. 3. Select Advanced Setup. 4. Touch Link Speed. 5. Touch the appropriate option that matches your network hardware. Change IP settings The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an advanced user and want to use different settings (such as the IP address, subnet mask, or the default gateway), you can change them manually. CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the installation, your network components cannot connect with the printer. ENWW 1. From the printer control panel, touch and slide your finger across the screen, touch Setup, and then touch Network Setup. 2. Touch Ethernet Settings or Wireless Settings. 3. Touch Advanced Setup. 4. Touch IP Settings. Change network settings 109 5. A message appears warning that changing the IP address removes the printer from the network. Touch OK to continue. 6. Automatic is selected by default. To change the settings manually, touch Manual, and then enter the appropriate information for the following settings: ● IP ● Subnet Mask ● Default Gateway ● DNS Address 7. Enter your changes, and then touch Done. 8. Touch OK. 110 Chapter 8 Network setup ENWW Change from a wireless connection to a USB or Ethernet connection To change from a wireless connection to a USB or Ethernet connection(Windows) 1. Depending on your operating system, do one of the following: ● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the printer name, and then click Utilities. ● Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, click the folder of your printer. 2. Click Printer Setup & Software. 3. Click Connect a new printer. 4. Select the appropriate connection type when prompted and then follow the display instructions to complete the setup. To change from a wireless connection to a USB or Ethernet connection (OS X) ENWW 1. Connect the printer to your wireless network. 2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software connection to wireless for this printer. Change from a wireless connection to a USB or Ethernet connection 111 Use HP wireless direct With HP wireless direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable device—without connecting to an existing wireless network. When using HP wireless direct, note the following guidelines: ● Make sure your computer or mobile device has the necessary software. If you are using a computer, make sure you have installed the printer software provided with the printer. ● If you are using a mobile device, make sure you have installed a compatible printing app. For more information about mobile printing, visit www.hp.com/global/us/en/eprint/ mobile_printing_apps.html. ● Make sure HP wireless direct is turned on in the printer and, if necessary, security is enabled. For more information, see Turn on HP wireless direct on page 112. ● If you have not installed the HP printer software on the computer, connect to wireless direct first and then install the printer software. Select Wireless when prompted by the printer software for a connection type. ● Up to five computers and mobile devices can use the same HP wireless direct connection. ● HP wireless direct can be used while the printer is also connected to a computer using USB cable or to a network using a wireless connection. ● HP wireless direct cannot be used to connect a computer, mobile device, or printer to the Internet. Click here to go online for more information. NOTE: At this time, these websites might not be available in all languages. This section contains the following topics: ● Turn on HP wireless direct ● Print from a wireless-capable mobile device ● Print from a wireless-capable computer Turn on HP wireless direct 1. From the printer control panel, touch 2. User the slider next to HP Wireless Direct to turn wireless direct on or off. (wireless direct). TIP: If you would like to use HP wireless direct with greater security and if the computer or mobile device supports WPA2 encryption, touch Security to enable or disable security. With security enabled, only users with the password can connect wirelessly to the printer. Without enabling security, anyone with a wireless device within the wireless range of the printer can connect to the printer. 3. Touch Wireless Direct Name to display the wireless direct name. 4. If you have enabled security, touch Security Passcode to display the wireless direct password. TIP: You can also turn on HP wireless direct from the EWS. For more information about using the EWS, see Embedded web server on page 118. 112 Chapter 8 Network setup ENWW Print from a wireless-capable mobile device Make sure you have installed a compatible printing app on your mobile device. For more information, visit www.hp.com/global/us/en/eprint/mobile_printing_apps.html. 1. Make sure you have turned on HP wireless direct on the printer. For more information, see Turn on HP wireless direct on page 112. 2. Turn on the Wi-Fi connection on your mobile device. For more information, see the documentation provided with the mobile device. NOTE: If your mobile device does not support Wi-Fi, you are not able to use HP wireless direct. 3. From the mobile device, connect to a new network. Use the process you normally use to connect to a new wireless network or hotspot. Choose the HP wireless direct name from the list of wireless networks shown such as HP-Print-**-Officejet Pro XXXX (where ** are the unique characters to identify your printer and XXXX is the printer model located on the printer). If HP wireless direct is turned on with security, enter the password when prompted. 4. Print your document. Print from a wireless-capable computer With HP wireless direct, you can print wirelessly from a computer without connecting to an existing wireless network or using the HP printer software provided with the printer. Follow the instructions to print from your wireless-capable computer. To print from a wireless-capable computer (Windows) 1. Make sure you have turned on HP wireless direct on the printer. For more information, see Turn on HP wireless direct on page 112. 2. Turn on the computer's Wi-Fi connection. For more information, see the documentation provided with the computer. NOTE: If your computer does not support Wi-Fi, you are not able to use HP wireless direct. 3. From the computer, connect to a new network. Use the process you normally use to connect to a new wireless network or hotspot. Choose the HP wireless direct name from the list of wireless networks shown such as HP-Print-**-Officejet Pro XXXX (where ** are the unique characters to identify your printer and XXXX is the printer model located on the printer). If HP wireless direct is turned on with security, enter the password when prompted. 4. Proceed to step 5 if the printer has been installed and connected to the computer over a wireless network. If the printer has been installed and connected to your computer with a USB cable, follow the steps below to install the printer software using the HP wireless direct connection. a. b. ENWW Depending on your operating system, do one of the following: ● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the printer name, and then click Utilities. ● Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, click the folder of your printer. Click Printer Setup & Software, and then select Connect a new printer. Use HP wireless direct 113 c. When the Connection Options software screen appears, select Wireless. Select your HP printer software from the list of detected printers. d. 5. Follow the on-screen instructions. Print your document. To print from a wireless-capable computer (OS X) 1. Make sure you have turned on HP wireless direct on the printer. For more information, see Turn on HP wireless direct on page 112. 2. Turn on AirPort. For more information, see the documentation provided by Apple. 3. Click the AirPort icon and choose the HP wireless direct name, such as HP-Print-**-Officejet Pro XXXX (where ** are the unique characters to identify your printer and XXXX is the printer model located on the printer). If HP wireless direct is turned on with security, enter the password when prompted. 4. Add the printer. a. In System Preferences, select Print & Fax or Print & Scan, depending on your operating system. b. Click + below the list of printers at the left. c. Select the printer from the list of detected printers (the word “Bonjour” is listed the right column beside the printer name), and click Add. 114 Chapter 8 Network setup ENWW 9 Printer management tools This section contains the following topics: ENWW ● Toolbox (Windows) ● HP Utility (OS X) ● Embedded web server 115 Toolbox (Windows) The Toolbox provides maintenance information about the printer. NOTE: The Toolbox can be installed from the HP Software CD if the computer meets the system requirements. ● Open the Toolbox Open the Toolbox 1. Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. 2. In the HP printer software, click Maintain Your Printer under Print, Scan & Fax. 116 Chapter 9 Printer management tools ENWW HP Utility (OS X) HP Utility contains tools to configure print settings, calibrate the printer, order supplies online, and find web site support information. NOTE: The features available in HP Utility vary depending on the selected printer. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace cartridges until prompted to do so. Double-click HP Utility in the Hewlett-Packard folder in the Applications folder at the top level of the hard disk. ENWW HP Utility (OS X) 117 Embedded web server When the printer is connected to a network, you can use the printer's home page (embedded web server or EWS) to view status information, change settings, and manage it from your computer. NOTE: To view or change some settings, you might need a password. You can open and use the embedded web server without being connected to the Internet. However, some features are not available. ● About cookies ● Open the embedded web server About cookies The embedded Web server (EWS) places very small text files (cookies) on your hard drive when you are browsing. These files let the EWS recognize your computer the next time you visit. For example, if you have configured the EWS language, a cookie helps remember which language you have selected so that the next time you access the EWS, the pages are displayed in that language. Some cookies (such as the cookie that stores customer-specific preferences) are stored on the computer until you clear them manually. You can configure your browser to accept all cookies, or you can configure it to alert you every time a cookie is offered, which allows you to decide which cookies to accept or refuse. You can also use your browser to remove unwanted cookies. NOTE: Depending on your printer, if you disable cookies, you also disable one or more of the following features: ● Starting where you left the application (especially useful when using setup wizards) ● Remembering the EWS browser language setting ● Personalizing the EWS Home page For information about how to change your privacy and cookie settings and how to view or delete cookies, see the documentation available with your Web browser. Open the embedded web server You can access the embedded Web server through either the network or Wireless Direct. NOTE: The printer must be on a network and must have an IP address. The IP address and hostname for the printer are listed on the status report. For more information, see Network configuration page on page 126. To open the embedded web server from a web browser ● In a supported web browser on your computer, type the IP address or hostname assigned to the printer. For example, if the IP address is 123.123.123.123, type the following address into the web browser: http://123.123.123.123 To open the embedded web server through wireless direct 1. Touch 2. If the display shows that wireless direct is Off, touch Wireless Direct to turn it on. (wireless direct) from the printer control panel display. 118 Chapter 9 Printer management tools ENWW ENWW 3. From your wireless computer, turn wireless on, search for and connect to the wireless direct name. If you have wireless direct security on, enter the wireless direct password when prompted. 4. In a supported Web browser on your computer, type the following address: http:// 192.168.223.1. Embedded web server 119 120 Chapter 9 Printer management tools ENWW 10 Solve a problem The information in this section suggests solutions to common problems. If your printer is not operating correctly and these suggestions did not solve your problem, try using one of the following support services to obtain assistance. This section contains the following topics: ENWW ● HP support ● Get help from the printer control panel ● Understand printer reports ● Solve printer problems ● Solve printing problems ● Solve copy problems ● Solve scan problems ● Solve fax problems ● Solve HP ePrint and HP Printables problems ● Solve network problems ● Solve printer management problems ● Printhead maintenance ● Clear jams ● Clear the print carriage 121 HP support ● Register printer ● Support process ● Obtain electronic support ● HP support by phone Register printer By taking just a few quick minutes to register, you can enjoy quicker service, more efficient support, and product support alerts. If you did not register your printer while installing the software, you can register now at http://www.register.hp.com. Support process If you have a problem, follow these steps: 1. Check the documentation that came with the printer. 2. Visit the HP online support website at www.hp.com/support. HP online support is available to all HP customers. It is the fastest source for up-to-date product information and expert assistance, and includes the following features: 3. ● Fast access to qualified online support specialists ● Software and driver updates for the printer ● Valuable troubleshooting information for common problems ● Proactive printer updates, support alerts, and HP newsgrams that are available when you register the printer Call HP support. For more information, see HP support by phone on page 123. Support options and availability vary by printer, country/region, and language. Obtain electronic support To find support and warranty information, go to the HP web site at www.hp.com/support. This website provides information and utilities that can help you correct many common printer problems. If prompted, select your country/region, and then click Contact HP for information about calling for technical support. This web site also offers technical support, drivers, supplies, ordering information and other options such as: ● Access online support pages. ● Send HP an email message for answers to your questions. ● Connect with an HP technician by using online chat. ● Check for HP software updates. You can also obtain support from the HP software for Windows or OS X, which provide easy, step-bystep solutions to common printing problems. For more information, see Printer management tools on page 115. Support options and availability vary by printer, country/region, and language. 122 Chapter 10 Solve a problem ENWW HP support by phone Phone support options and availability vary by printer, country/region, and language. This section contains the following topics: ● Before you call ● Phone support period ● Support phone numbers ● After the phone support period Before you call Call HP support while you are in front of the computer and the printer. Be prepared to provide the following information: ● Model number ● Serial number (located on the back or bottom of the printer) ● Messages that appear when the situation occurs ● Answers to these questions: ◦ Has this situation happened before? ◦ Can you re-create it? ◦ Did you add any new hardware or software to your computer at about the time that this situation began? ◦ Did anything else occur prior to this situation (such as a thunderstorm or moving the printer)? Phone support period One year of phone support is available in North America, Asia Pacific, and Latin America (including Mexico). To determine the duration of phone support in Europe, the Middle East, and Africa, go to www.hp.com/support. Standard phone company charges apply. Support phone numbers For the most current HP list of telephone support numbers and call costs information, see www.hp.com/support. After the phone support period After the phone support period, help is available from HP at an additional cost. Help may also be available at the HP online support Web site: www.hp.com/support. Contact your HP dealer or call the support phone number for your country/region to learn more about support options. ENWW HP support 123 Get help from the printer control panel You can use the printer’s help topics to learn more about the printer, and some help topics include animations that guide you through procedures, such as clearing jams. To open the help topics from the printer control panel, touch “ 124 Chapter 10 Solve a problem (Help) from the Home screen. ENWW Understand printer reports You can print the following reports to help troubleshoot problems with the printer. ● Printer status report ● Network configuration page Printer status report Use the printer status report to view current printer information and ink cartridge status. Also use the printer status report to help you troubleshoot problems with the printer. The printer status report also contains a log of recent events. If you need to call HP, it is often useful to print the printer status report before calling. To print the Printer Status Report ENWW 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Print Reports and then touch Printer Status Report. 1. Product Information: Shows printer information (such as the printer name, model number, serial number, and firmware version number), the accessories that are installed (such as the automatic two-sided printing accessory or duplexer), and the number of pages printed from the trays and accessories. 2. Print Usage Information: Shows summary information about pages printed from the printer. Understand printer reports 125 3. Ink Delivery System Information: Shows the estimated ink levels (represented in graphical form as gauges) and the part numbers and warranty expiration dates for the ink cartridges. NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace cartridges until prompted to do so. 4. Additional Assistance: Provides information about where you can go to get more information about the printer, as well as information about how to set up a Fax Text and how to run a Wireless Network Test. Network configuration page If the printer is connected to a network, you can print a network configuration page to view the network settings for the printer and a list of networks detected by your printer. The last page of the report includes a list of all detectable wireless networks in the area, along with singal strength and the channels being used. This might help you select a channel for your network which is not heavily used by other networks (which will improve network performance). You can use the network configuration page to help troubleshoot network connectivity problems. If you need to call HP, it is often useful to print this page before calling. To print the network configuration page 1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 2. Touch Print Reports and then touch Network Configuration Page. 126 Chapter 10 Solve a problem ENWW ENWW 1. General Information: Shows information about the current status and active connection type of the network, and other information, such as the URL of the embedded web server. 2. 802.3 Wired: Shows information about the active Ethernet network connection, such as the IP address, subnet mask, default gateway, as well as the hardware address of the printer. 3. 802.11 Wireless: Shows information about your wireless network connection, such as the host name, IP address, subnet mask, default gateway, and server. It also indicates the network name (SSID), the relative signal strengths and the channels being used. You can check the network list to view if your own network signal strength is good and change the wireless communication setup using Wireless Setup Wizard. For more information, see Change from an Ethernet connection to a wireless connection on page 107. Understand printer reports 127 4. Wireless Direct: Shows information about your wireless directconnection, such as the network name (SSID), IP address, subnet mask, default gateway, and server. 5. Miscellaneous: Shows information about more advanced network settings. ● Port 9100: The printer supports raw IP printing through TCP Port 9100. This HP-proprietary TCP/IP port on the printer is the default port for printing. It is accessed by HP software (for example, the HP Standard Port). ● LPD: Line Printer Daemon (LPD) refers to the protocol and programs associated with lineprinter spooling services that may be installed on various TCP/IP systems. NOTE: The LPD functionality can be used with any host implementation of LPD that complies with the RFC 1179 document. The process for configuring printer spoolers, however, might differ. See your system documentation for information about configuring these systems. ● Bonjour: Bonjour services (which use mDNS, or Multicast Domain Name System) are typically used on small networks for IP address and name resolution (through UDP port 5353), where a conventional DNS server is not used. ● SLP: Service Location Protocol (SLP) is an Internet standard network protocol that provides a framework to allow networking applications to discover the existence, location, and configuration of networked services in enterprise networks. This protocol simplifies discovery and use of network resources such as printers, web servers, fax machines, video cameras, files systems, backup devices (tape drives), databases, directories, mail servers, calendars. ● Microsoft Web Services: Enable or disable the Microsoft Web Services Dynamic Discovery (WS Discovery) protocols or Microsoft Web Services for Devices (WSD) Print services supported on the printer. Disable unused print services to prevent access through those services. NOTE: For more information about WS Discovery and WSD Print, visit www.microsoft.com. ● SNMP: Simple Network Management Protocol (SNMP) is used by network management applications for device management. The printer supports SNMPv1/v2 and SNMPv3 protocols on IP networks. ● WINS: If you have a Dynamic Host Configuration Protocol (DHCP) server on your network, the printer automatically obtains its IP address from that server and registers its name with any RFC 1001 and 1002-compliant dynamic name services as long as a WINS server IP address has been specified. ● IPP: Internet Printing Protocol (IPP) is a standard network protocol for remote printing. Unlike other remote IP-based protocols, IPP supports access control, authentication, and encryption, allowing for more secure printing. ● Proxy Settings: Shows information about proxy address, port, and the status of authentication. You can change the proxy settings from EWS. To change the proxy settings, click Web Services from EWS, click Proxy Settings in the Web Services Settings, select the appropriate options. 128 Chapter 10 Solve a problem ENWW Solve printer problems This section contains the following topics: ● The printer shuts down unexpectedly ● Printhead alignment fails ● Paper-feed problems ● The printer cannot read the memory device The printer shuts down unexpectedly Check the power and power connections ● Make sure the printer's power cord is connected firmly to a functioning power outlet. Check the Schedule on and off feature ● The printer's Schedule On and Off feature will turn off the printer at the time you set. Check if you enable the Schedule On and Off feature. For more information, see Manage Power on page 5. Printhead alignment fails If the alignment process fails, make sure you have loaded unused, plain white paper into the input tray. If you have colored paper loaded in the input tray when you align the ink cartridges, the alignment fails. If the alignment process fails repeatedly and the print quality is poor, you might need to clean the printhead. To clean the printhead, see Clean the printhead on page 155. If cleaning the printhead does not solve the problem, contact HP support. Go to www.hp.com/support. This website provides information and utilities that can help you correct many common printer problems. If prompted, select your country/region, and then click Contact HP for information on calling for technical support. Paper-feed problems TIP: You can visit the HP online support website at www.hp.com/support for information and utilities that can help you correct many common printer problems. Paper is not picked up from a tray ENWW ● Make sure paper is loaded in the tray. For more information, see Load paper on page 23. Fan the paper before loading. ● Make sure the paper-width guides are set to the correct markings in the tray for the paper size you are loading. Also make sure the paper guides are snug, but not tight, against the stack. ● Make sure paper in the tray is not curled. Uncurl paper by bending it in the opposite direction of the curl. Solve printer problems 129 Pages are skewing ● Make sure the paper loaded in the trays is aligned to the paper-width guides. If needed, pull out the trays from the printer and reload the paper correctly, making sure that the paper guides are aligned correctly. ● Load paper into the printer only when it is not printing. ● Remove and replace the automatic two-sided printing accessory (duplexer). ◦ Push the button on either side of the duplexer, and then remove the unit. ◦ Reinsert the duplexer into the printer. Multiple pages are being picked up ● Make sure the paper-width guides are set to the correct markings in the tray for the paper size you are loading. Also make sure the paper-width guides are snug, but not tight, against the stack. ● Make sure the tray is not overloaded with paper. ● Use HP paper for optimum performance and efficiency. The printer cannot read the memory device Make sure that the memory device is one of the supported types and fully inserted into the correct slot. For more information, see Insert a USB flash drive on page 29. Some memory devices have a switch that controls how they can be used. Make sure that the switch is set so that the memory device can be read. 130 Chapter 10 Solve a problem ENWW Solve printing problems TIP: (Windows) If you're having trouble printing, run the HP Print and Scan Doctor to troubleshoot the issue automatically. The utility will try to diagnose and fix the issue. The HP Print and Scan Doctor may not be available in all languages. The printer is not responding (nothing prints) ● There are print jobs stuck in the print queue Open the print queue, cancel all documents, and then reboot the computer. Try to print after the computer reboots. Refer to the Help system for the operating system for more information. ● Check the HP software installation If the printer is turned off when printing, an alert message should appear on your computer screen; otherwise, the HP software provided with the printer might not be installed correctly. To resolve this, uninstall the HP software completely, and then reinstall the HP software. ● Check the cable connections Make sure both ends of the USB cable or Ethernet cable are secure. If the printer is connected to a network, check the following: ● ◦ Check the Link light on the back of the printer above the power input. ◦ Make sure you are not using a phone cord to connect the printer. Check the printer’s wireless connection If the printer is connected to the network with a wireless connection, check that the blue Wireless light is on and not blinking. A blinking light indicates there is connection problem between the printer and the network. You can print a Wireless Test Report to help diagnose any issues. ● Check any personal firewall software installed on the computer The personal software firewall is a security program that protects a computer from intrusion. However, the firewall might block communication between the computer and the printer. If there is a problem communicating with the printer, try temporarily disabling the firewall. If the problem persists, the firewall is not the source of the communication problem. Re-enable the firewall. Use this troubleshooter to help you get your printer on the network if you have a firewall or antivirus protection that is causing a problem. Click here to go online for more information. At this time, this website might not be available in all languages. ● Restart the printer and the computer If the printer is still not responding, turn off the printer and the computer, and turn them back on. If the above solutions do not resolve the problem, click here for more online troubleshooting. Something on the page is missing or incorrect ● Try the solutions in Print quality is not acceptable ● Check the printer location and length of USB cable High electromagnetic fields (such as those generated by USB cables) can sometimes cause slight distortions to printouts. Move the printer away from the source of the electromagnetic fields. Also, it is recommended that you use a USB cable that is less than 3 meters (9.8 feet) long to minimize the effects of these electromagnetic fields. ENWW Solve printing problems 131 Print quality troubleshooting 1. Make sure you are using genuine HP ink cartridges. Genuine HP ink cartridges are designed and tested with HP printers to help you easily produce great results, time after time. NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Printer service or repairs required as a result of using a non-HP supply are not covered under warranty. If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit 2. Check the ink levels. The ink cartridges might have insufficient ink. Check the estimated ink levels in the ink cartridges. For more information, see Check the estimated ink levels on page 97. NOTE: For regular usage, this product is not designed to print using only the black cartridge when the color cartridges are out of ink. However, your printer is designed to let you print as long as possible when your cartridges start to run out of ink. When there is sufficient ink in the printhead, the printer will offer you the use of black ink only when one or more of the color cartridges are out of ink, and the use of color ink only when the black cartridge is out of ink. ● The amount that you can print using black or color ink only is limited, so have replacement ink cartridges available when you are printing with black or color ink only. ● When there is no longer sufficient ink to print you will get a message that one or more cartridges are depleted, and you will need to replace the depleted cartridges before you resume printing. For more information about printing under these conditions, see the following: ● When one or more color cartridges are out of ink, see Use black ink only? on page 236. ● When black cartridge is out of ink, see Use color ink only? on page 237. CAUTION: While ink cartridges are not damaged when left outside of the printer, the printhead does need to have all cartridges installed at all times after the printer is set up and in use. Leaving one or more cartridge slots empty for an extended period may lead to print quality problems and possibly damage the printhead. If you have recently left a cartridge out of the printer for an extended period and have noticed poor print quality, clean the printhead. For more information, see Clean the printhead on page 155. 3. Check the paper loaded in the input tray. Make sure the paper is loaded correctly and that it is not wrinkled or too thick. ● Load paper with the print side facing down. For example, if you are loading glossy photo paper, load the paper with the glossy side down. ● Make sure the paper lays flat in the input tray and is not wrinkled. If the paper is too close to the printhead during printing, the ink might be smeared. This can happen if the paper is raised, wrinkled, or very thick, such as a mailing envelope. For more information, see Load paper on page 23. 132 Chapter 10 Solve a problem ENWW 4. Check the paper type. HP recommends that you use HP papers or any other paper type with ColorLok technology that is appropriate for the printer. All papers with the ColorLok logo are independently tested to meet high standards of reliability and print quality, and produce documents with crisp, vivid color, bolder blacks and dry faster than ordinary plain papers. For more information, see Paper basics on page 20. Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper. Store specialty paper in its original packaging inside a resealable plastic bag on a flat surface in a cool, dry place. When you are ready to print, remove only the paper you plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag. This prevents the photo paper from curling. 5. Check the print settings by clicking the button that opens the Properties dialog box. (Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences.) ● Check the print settings in the printer driver to see if the color settings are incorrect. For example, check to see if the document is set to print in grayscale. Or, check to see if advanced color settings such as saturation, brightness, or color tone, are set to modify the appearance of colors. ● Check the print quality setting and make sure it matches the type of paper loaded in the printer. You might need to choose a lower print quality setting if colors are running into each other. Or, choose a higher setting if you are printing a high-quality photo, and then make sure photo paper such as HP Advanced Photo Paper is loaded in the input tray. NOTE: On some computer screens, colors might appear differently than they do when printed on paper. In this case, there is nothing wrong with the printer, print settings, or ink cartridges. No further troubleshooting is required. 6. Print and evaluate a print quality report. Print quality problems can have many causes: software settings, a poor image file, or the printing system itself. If you are unhappy with the quality of your prints, a Print Quality Diagnostic page can help you determine if the printing system is working correctly. To print a print quality report ENWW a. Touch and slide your finger across the screen, touch Setup. b. Touch Print Reports. c. Touch Print Quality Report. Solve printing problems 133 If defects are seen on the page, follow the steps below: a. If the Print Quality Diagnostic report shows faded, partial, streaked, or missing color bars or patterns, check for depleted ink cartridges, and replace the ink cartridge that corresponds to the defective color bar or color pattern. If there is no depleted ink cartridge, remove and reinstall all ink cartridges to make sure they are properly installed. Do not remove the depleted cartridge until you have a new ink cartridge available to replace. For information about how to install new cartridges, see Replace the ink cartridges on page 99. b. If you see white or dark lines where the arrows are pointing in Test Pattern 1, calibrate the linefeed. For more information, see Calibrate the linefeed on page 157. c. If the lines in Test Pattern 2 are not straight and connected, align the printer. For more information, see Align the printhead on page 156. d. If you see white lines in any of the color blocks in Test Pattern 3, clean the printhead. For more information, see Clean the printhead on page 155. e. If none of the previous steps have helped, contact HP support to replace the printhead. For more information, see HP support on page 122. 134 Chapter 10 Solve a problem ENWW Solve copy problems If the following topics do not help, see HP support on page 122 for information about HP support. ● Copies are blank or faded ● Size is reduced ● Copy quality is poor Learn more about how to solve copy issues. Click here to go online for more information. Copies are blank or faded ● The contrast setting might be set too light. From the printer control panel display, touch Copy, touch and Settings, touch Lighter/Darker, and then use the arrows to create darker copies. ● The quality setting of Fast (which produces draft-quality copies) might be responsible for the missing or faded documents. Change to the Normal or Best setting. ◦ The contrast setting might be set too light. From the printer control panel display, touch Copy, touch and Settings, touch Lighter/Darker, and then use the arrows to create darker copies. Size is reduced ● The reduce/enlarge or other copy feature might have been set from the printer control panel to reduce the scanned image. Check the settings for the copy job to make sure that they are for normal size. ● The HP software settings might be set to reduce the scanned image. Change the settings, if needed. For more information, see the on-screen Help for the HP software. ● The dirty scanner glass might reduce the scanned image. Clean the scanner glass or lid backing. For more information, see Maintain the printer on page 34. ● This incoming page size may be larger than the original currently loaded. Copy quality is poor ● ● Check the printer ◦ The scanner lid might not be closed correctly. ◦ The scanner glass or lid backing might need cleaning. For more information, see Maintain the printer on page 34. ◦ The automatic document feeder (ADF) might need cleaning. For more information, see Maintain the printer on page 34. Unwanted lines ◦ ● The scanner glass, lid backing, or frame might need cleaning. For more information, see Maintain the printer on page 34. Copy is slanted or skewed If you are using the automatic document feeder (ADF), check the following: ENWW ◦ Make sure that the ADF input tray is not too full. ◦ Make sure that the ADF width adjusters are snug against the sides of the paper. Solve copy problems 135 For more information, see Load an original in the document feeder on page 28. ● Horizontal grainy or white bands in light-gray to medium-gray areas ◦ The default enhancement setting might not be suitable for the job. Check the setting and change it to enhance text or photographs, if needed. For more information, see Copy on page 54. 136 Chapter 10 Solve a problem ENWW Solve scan problems ● Scanner did nothing ● Scan takes too long ● Part of the document did not scan or text is missing ● Text cannot be edited ● Scanned image quality is poor ● Unable to scan to network folder ● Unable to scan to email Learn more about how to solve scan issues. Click here to go online for more information. Scanner did nothing ● Check the original ◦ ● Check the printer ◦ ● Make sure that the original is loaded correctly. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. The printer might be coming out of Sleep mode after a period of inactivity, which delays processing a short while. Wait until the printer displays the Home screen. Check the HP software Make sure that the HP software provided with the printer is installed correctly. NOTE: If you do not scan frequently, you can choose to turn off the feature. ◦ (Windows) Open the HP printer software. For more information, see Open the HP printer software (Windows) on page 37. In the window that appears, go to the Scan section under Print, Scan & Fax, select Scan a Document or Photo. ◦ (OS X) Open HP Utility. For more information, see HP Utility (OS X) on page 117. Under Scan Settings, select Scan to Computer, and ensure that Enable Scan to Computer is selected. Scan takes too long Scanning with higher scan resolution takes longer and results in larger file sizes. Lower the resolution to scan more quickly. Part of the document did not scan or text is missing ● Check the original ◦ ENWW Make sure that you loaded the original correctly. Solve scan problems 137 For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. ◦ If you scanned the document from the ADF, try scanning the document directly from the scanner glass. For more information, see Load an original on the scanner glass on page 27. ◦ ● Colored backgrounds can cause images in the foreground to blend into the background. Try adjusting the settings before you scan the original, or try enhancing the image after you scan the original. Check the settings ◦ Make sure that the input paper size is large enough for the original that you are scanning. ◦ If you are using the HP printer software, the default settings in the printer software might be set to automatically perform a specific task other than the one that you are attempting. See the on-screen Help for the printer software for instructions about changing the properties. Text cannot be edited ● Make sure that the OCR has been installed: Depending on your operating system, do one of the following: ◦ Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the printer name, and then click Utilities. Select Printer Setup & Software. Click Add more software, click Customize Software Selections, and make sure the OCR option is selected. ◦ Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, select your printer name, and then select Printer Setup & Software. Click Add More Software, click Customize Software Selections, and make sure the OCR option is selected. ◦ (OS X) If you have installed the HP printer software using the Minimum installation option, the OCR software might not have been installed. To install this software, place the printer software CD into the computer, double-click the HP Installer icon on the printer software CD. When you scan the original, make sure that you select a document type in the software that creates editable text. If text is classified as a graphic, it is not converted to text. If you are using a separate OCR (optical character recognition) program, the OCR program might be linked to a word-processing program that does not perform OCR tasks. For more information, see the documentation provided with the OCR program. Make sure you have selected an OCR language that corresponds to the language used for the document you are scanning. For more information, see the documentation provided with the OCR program. ● Check the originals ◦ When scanning documents as editable text from the ADF, the original must be loaded into the ADF with the top forward and print-side up. When scanning from the scanner glass, the original must be loaded with the top facing the right edge of the scanner glass. Also, make sure the document is not skewed. For more information, see Load an original on the scanner glass on page 27 or Load an original in the document feeder on page 28. ◦ The software might not recognize text that is tightly spaced. For example, if the text that the software converts has missing or combined characters, "rn" might appear as "m." 138 Chapter 10 Solve a problem ENWW ◦ The accuracy of the software depends on the image quality, text size, and structure of the original and the quality of the scan itself. Make sure that your original has good image quality. ◦ Colored backgrounds can cause images in the foreground to blend too much. Scanned image quality is poor ● Text or images on the back of a two-sided original appear in the scan ◦ ● Two-sided originals can "bleed" text or images from the back side to the scan if the originals are printed on paper that is too thin or too transparent. Unwanted lines Ink, glue, correction fluid, or an unwanted substance might be on the scanner glass. Try cleaning the scanner glass. For more information, see Maintain the printer on page 34. ● The scanned image is skewed (crooked) ◦ The original might have been loaded incorrectly. Be sure to use the paper-width guides when you load the originals into the ADF. For more information, see Load an original in the document feeder on page 28. For best results, use the scanner glass for scanning rather than the ADF. For more information, see Load an original on the scanner glass on page 27. ● The scanned image shows blots, lines, vertical white stripes, or other defects ◦ If the scanner glass is dirty, the image produced does not have optimum clarity. See Maintain the printer on page 34 for cleaning instructions. ◦ ● The defects might be on the original and are not a result of the scanning process. Size is reduced ◦ The HP printer software settings might be set to reduce the scanned image. See the HP printer software Help for more information about changing the settings. Unable to scan to network folder NOTE: ● HP Digital Filing does not support Active Directory. The computer where the network folder is located is turned off Make sure the computer where the network folder is stored is turned on and connected to the network. ● ENWW The network folder has not been set up correctly ◦ Make sure the folder is created on the server. For more information, see the documentation available for your operating system. ◦ Make sure the folder has been shared and that users can both read and write to the folder. If you are using a Mac computer, make sure you have enabled SMB sharing. For more information, see the documentation available for your operating system. ◦ Make sure the folder name uses only the letters or characters supported by the operating system. For more information, see the documentation available with the operating system. Solve scan problems 139 ● ◦ Make sure the folder name is entered in the correct format in the HP software. For more information, see the information in the wizard or the setup assistant. ◦ Make sure the valid username and password have been entered. For more information, see the information in the wizard or the setup assistant. The disk is full Make sure the server containing the network folder has sufficient free disk space. ● The printer cannot create a unique filename using the assigned prefix and suffix or the filename prefix has not been set up correctly ◦ The printer can create up to 9,999 files using the same prefix and suffix. If you have scanned many files to a folder, change the prefix. ◦ Make sure the filename prefix uses only the letters or characters supported by the operating system. For more information, see the documentation available with the operating system. Unable to scan to email ● The email profile has not been set up correctly Make sure the valid outgoing SMTP server settings have been specified in the HP software. For more information about the SMTP server settings, see the documentation provided by your email service provider. ● Email messages are sent to some recipients but not to others when sending to multiple recipients The email addresses might not be correct or might not be recognized by the email server. Make sure that the email addresses for all email recipients have been entered correctly in the HP software. Check your email Inbox for any delivery notification failure messages from the email server. ● Sending large email messages Some email servers have been configured to reject email messages larger than a predetermined size. To determine if your email server has a maximum file-size limit, see the documentation provided by your email service provider. If the email server does have such a limit, change the maximum email attachment size for the outgoing email profile to a value smaller than that of the email server. 140 Chapter 10 Solve a problem ENWW Solve fax problems This section contains fax setup troubleshooting information for the printer. If the printer is not set up correctly for faxing, you might experience problems when sending faxes, receiving faxes, or both. If you are having faxing problems, you can print a fax test report to check the status of the printer. The test fails if the printer is not set up correctly for faxing. Perform this test after you have completed setting up the printer for faxing. For more information, see Test fax setup on page 204. If the test fails, review the report for information on how to fix any problems found. Learn more information about running fax test, click here to go online for more information. Learn more about fax troubleshooting, click here to go online for more information. (At this time, this website might not be available in all languages.) For further assistance, visit the HP online support site www.hp.com/support. ● The fax test failed ● The display always shows Phone Off Hook ● The printer is having problems sending and receiving faxes ● The printer cannot receive faxes, but can send faxes ● The printer cannot send faxes, but can receive faxes The fax test failed If you ran a fax test and the test failed, review the report for basic information about the error. For more detailed information, check the report to see which part of the test failed, and then review the appropriate topic in this section for solutions to try. This section contains the following topics: ● The "Fax Hardware Test" failed ● The "Fax Connected to Active Telephone Wall Jack" test failed ● The "Phone Cord Connected to Correct Port on Fax" test failed ● The "Using Correct Type of Phone Cord with Fax" test failed ● The "Dial Tone Detection" test failed ● The "Fax Line Condition" test failed The "Fax Hardware Test" failed ENWW ● Turn the printer off by pressing (the Power button) located on the printer control panel and then unplug the power cord from the back of the printer. After a few seconds, plug the power cord in again, and then turn the power on. Run the test again. If the test fails again, continue reviewing the troubleshooting information in this section. ● Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be a problem. ● If you are running the test from the Fax Setup Wizard (Windows) or HP Utility (OS X), make sure the printer is not busy completing another task, such as receiving a fax or making a copy. Check the display for a message indicating that the printer is busy. If it is busy, wait until it is finished and in the idle state before running the test. Solve fax problems 141 ● Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready for faxing. If the Fax Hardware Test continues to fail and you experience problems faxing, contact HP support. Go to www.hp.com/support. This website provides information and utilities that can help you correct many common printer problems. If prompted, select your country/region, and then click Contact HP for information on calling for technical support. The "Fax Connected to Active Telephone Wall Jack" test failed ● Check the connection between the telephone wall jack and the printer to make sure the phone cord is secure. ● Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. ● Make sure you have correctly connected the printer to the telephone wall jack. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. Learn more about setting up the printer for faxing, click here to go online for more information. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. ● Try connecting a working phone and phone cord to the telephone wall jack that you are using for the printer and check for a dial tone. If you do not hear a dial tone, contact your telephone company and have them check the line. ● Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be a problem. After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready for faxing. The "Phone Cord Connected to Correct Port on Fax" test failed Plug the phone cord into the correct port. ● Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. 142 Chapter 10 Solve a problem ENWW 1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: If you use the 2-EXT port to connect to the telephone wall jack, you cannot send or receive faxes. The 2-EXT port should only be used to connect other equipment, such as an answering machine. Figure 10-1 Back view of the printer 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port 2. After you have connected the phone cord to the port labeled 1-LINE, run the fax test again to make sure it passes and the printer is ready for faxing. 3. Try to send or receive a test fax. The "Using Correct Type of Phone Cord with Fax" test failed ● Make sure you used the phone cord supplied in the box with the printer to connect to the telephone wall jack. One end of the phone cord should be connected to the port labeled 1-LINE on the back of the printer, and the other end to your telephone wall jack, as shown in the illustration. 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port If the phone cord that came with the printer is not long enough, you can use a longer 2-wire phone cord to extend the length. You can purchase the cord at an electronics store that carries phone accessories. ● ENWW Check the connection between the telephone wall jack and the printer to make sure the phone cord is secure. Solve fax problems 143 ● Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. The "Dial Tone Detection" test failed ● Other equipment, which uses the same phone line as the printer, might be causing the test to fail. To find out if other equipment is causing a problem, disconnect everything from the phone line, and then run the test again. If the Dial Tone Detection Test passes without the other equipment, then one or more pieces of the equipment is causing problems; try adding them back one at a time and rerunning the test each time, until you identify which piece of equipment is causing the problem. ● Try connecting a working phone and phone cord to the telephone wall jack that you are using for the printer and check for a dial tone. If you do not hear a dial tone, contact your telephone company and have them check the line. ● Make sure you have correctly connected the printer to the telephone wall jack. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. ● If your telephone system is not using a standard dial tone, such as some PBX systems, this might cause the test to fail. This does not cause a problem sending or receiving faxes. Try sending or receiving a test fax. ● Check to make sure the country/region setting is set appropriately for your country/region. If the country/region setting is not set or is set incorrectly, the test might fail and you might have problems sending and receiving faxes. ● Make sure you connect the printer to an analog phone line or you cannot send or receive faxes. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. Connect the printer to an analog phone line and try sending or receiving a fax. ● Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready for faxing. If the Dial Tone Detection test continues to fail, contact your telephone company and have them check the phone line. The "Fax Line Condition" test failed ● Make sure you connect the printer to an analog phone line or you cannot send or receive faxes. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. Connect the printer to an analog phone line and try sending or receiving a fax. ● Check the connection between the telephone wall jack and the printer to make sure the phone cord is secure. 144 Chapter 10 Solve a problem ENWW ● Make sure you have correctly connected the printer to the telephone wall jack. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. ● Other equipment, which uses the same phone line as the printer, might be causing the test to fail. To find out if other equipment is causing a problem, disconnect everything from the phone line, and then run the test again. ◦ If the Fax Line Condition Test passes without the other equipment, then one or more pieces of the equipment is causing problems; try adding them back one at a time and rerunning the test each time, until you identify which piece of equipment is causing the problem. ◦ If the Fax Line Condition Test fails without the other equipment, connect the printer to a working phone line and continue reviewing the troubleshooting information in this section. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. ● Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready for faxing. If the Fax Line Condition test continues to fail and you experience problems faxing, contact your telephone company and have them check the phone line. The display always shows Phone Off Hook ● You are using the wrong type of phone cord. Make sure you are using the 2-wire phone cord that came with the printer to connect the printer to your phone line. If the phone cord that came with the printer is not long enough, you can use a longer phone cord to extend the length. You can purchase the cord at an electronics store that carries phone accessories. ● Other equipment that uses the same phone line as the printer might be in use. Make sure extension phones (phones on the same phone line, but not connected to the printer) or other equipment are not in use or off the hook. For example, you cannot use the printer for faxing if an extension phone is off the hook, or if you are using a computer dial-up modem to send email or access the Internet. The printer is having problems sending and receiving faxes ● Make sure the printer is turned on. Look at the display on the printer. If the display is blank and (the Power button) light is not lit, the printer is turned off. Make sure the power cord is firmly (the Power button) to turn on connected to the printer and plugged into a power outlet. Press the printer. After turning on the printer, HP recommends you wait five minutes before sending or receiving a fax. The printer cannot send or receive faxes while it is initializing after being turned on. ● ENWW If HP Digital Fax has been enabled, you might not be able to send or receive faxes if the fax memory is full (limited by printer memory). Solve fax problems 145 ● Make sure you used the phone cord supplied in the box with the printer to connect to the telephone wall jack. One end of the phone cord should be connected to the port labeled 1-LINE on the back of the printer and the other end to your telephone wall jack, as shown in the illustration. 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port If the phone cord that came with the printer is not long enough, you can use a longer 2-wire phone cord to extend the length. You can purchase the cord at an electronics store that carries phone accessories. ● Try connecting a working phone and phone cord to the telephone wall jack that you are using for the printer and check for a dial tone. If you do not hear a dial tone, call your local telephone company for service. ● Other equipment, which uses the same phone line as the printer, might be in use. For example, you cannot use the printer for faxing if an extension phone is off the hook, or if you are using a computer dial-up modem to send an email or access the Internet. ● Check to see if another process has caused an error. Check the display or your computer for an error message providing information about the problem and how to solve it. If there is an error, the printer cannot send or receive a fax until the error condition is resolved. ● The phone line connection might be noisy. Phone lines with poor sound quality (noise) can cause faxing problems. Check the sound quality of the phone line by plugging a phone into the telephone wall jack and listening for static or other noise. If you hear noise, turn Error Correction Mode (ECM) off and try faxing again. For information about changing ECM, see Send a fax in Error Correction Mode on page 66. If the problem persists, contact your telephone company. ● If you are using a digital subscriber line (DSL) service, make sure that you have a DSL filter connected or you cannot fax successfully. Click here to go online for more information. ● Make sure the printer is not connected to a telephone wall jack that is set up for digital phones. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. ● If you are using either a private branch exchange (PBX) or an integrated services digital network (ISDN) converter/terminal adapter, make sure the printer is connected to the correct port and the terminal adapter is set to the correct switch type for your country/region, if possible. Click here to go online for more information. ● If the printer shares the same phone line with a DSL service, the DSL modem might not be grounded correctly. If the DSL modem is not grounded correctly, it can create noise on the phone line. Phone lines with poor sound quality (noise) can cause faxing problems. You can check the sound quality of the phone line by plugging a phone into the telephone wall jack and 146 Chapter 10 Solve a problem ENWW listening for static or other noise. If you hear noise, turn off your DSL modem and completely remove power for at least 15 minutes. Turn the DSL modem back on and listen to the dial tone again. NOTE: You might notice static on the phone line again in the future. If the printer stops sending and receiving faxes, repeat this process. If the phone line is still noisy, contact your telephone company. For information on turning your DSL modem off, contact your DSL provider for support. ● If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall jack. The printer cannot receive faxes, but can send faxes ● If you are not using a distinctive ring service, check to make sure that the Distinctive Ring feature on the printer is set to All Rings. For more information, see Change the answer ring pattern for distinctive ring on page 78. ● If Auto Answer is set to Off, you need to receive faxes manually; otherwise, the printer cannot receive the fax. For information on receiving faxes manually, see Receive a fax manually on page 67. ● If you have a voice mail service at the same phone number you use for fax calls, you must receive faxes manually, not automatically. This means that you must be available to respond in person to incoming fax calls. Learn more about setting up the printer when you have a voice mail service, click here to go online for more information. For information on receiving faxes manually, see Receive a fax manually on page 67. ● If you have a computer dial-up modem on the same phone line with the printer, check to make sure that the software that came with your modem is not set to receive faxes automatically. Modems that are set up to receive faxes automatically take over the phone line to receive all incoming faxes, which prevents the printer from receiving fax calls. ● If you have an answering machine on the same phone line with the printer, you might have one of the following problems: ◦ Your answering machine might not be set up correctly with the printer. ◦ Your outgoing message might be too long or too loud to allow the printer to detect fax tones, and the sending fax machine might disconnect. ◦ Your answering machine might not have enough quiet time after your outgoing message to allow the printer to detect fax tones. This problem is most common with digital answering machines. The following actions might help solve these problems: ENWW ◦ When you have an answering machine on the same phone line you use for fax calls, try connecting the answering machine directly to the printer, click here to go online for more information. ◦ Make sure the printer is set to receive faxes automatically. For information on setting up the printer to receive faxes automatically, see Receive a fax on page 67. ◦ Make sure the Rings to Answer setting is set to a greater number of rings than the answering machine. For more information, see Set the number of rings before answering on page 78. Solve fax problems 147 ◦ Disconnect the answering machine and then try receiving a fax. If faxing is successful without the answering machine, the answering machine might be causing the problem. ◦ Reconnect the answering machine and record your outgoing message again. Record a message that is approximately 10 seconds in duration. Speak slowly and at a low volume when recording your message. Leave at least 5 seconds of silence at the end of the voice message. There should be no background noise when recording this silent time. Try to receive a fax again. NOTE: Some digital answering machines might not retain the recorded silence at the end of your outgoing message. Play back your outgoing message to check. ● If the printer shares the same phone line with other types of phone equipment, such as an answering machine, a computer dial-up modem, or a multi-port switch box, the fax signal level might be reduced. The signal level can also be reduced if you use a splitter or connect extra cables to extend the length of your phone. A reduced fax signal can cause problems during fax reception. To find out if other equipment is causing a problem, disconnect everything except the printer from the phone line, and then try to receive a fax. If you can receive faxes successfully without the other equipment, one or more pieces of the other equipment is causing problems; try adding them back one at a time and receiving a fax each time, until you identify which equipment is causing the problem. ● If you have a special ring pattern for your fax phone number (using a distinctive ring service through your telephone company), make sure that the Distinctive Ring feature on the printer is set to match. For more information, see Change the answer ring pattern for distinctive ring on page 78. The printer cannot send faxes, but can receive faxes ● The printer might be dialing too fast or too soon. You might need to insert some pauses in the number sequence. For example, if you need to access an outside line before dialing the phone number, insert a pause following the access number. If your number is 95555555, and 9 accesses an outside line, you might insert pauses as follows: 9-555-5555. To enter a pause in the fax number you are typing, touch * repeatedly, until a dash (-) appears on the display. You can also send the fax using monitor dialing. This enables you to listen to the phone line as you dial. You can set the pace of your dialing and respond to prompts as you dial. For more information, see Send a fax using monitor dialing on page 64. ● The number you entered when sending the fax is not in the proper format or the receiving fax machine is having problems. To check this, try calling the fax number from a telephone and listen for fax tones. If you cannot hear fax tones, the receiving fax machine might not be turned on or connected, or a voice mail service could be interfering with the recipient's phone line. You can also ask the recipient to check the receiving fax machine for any problems. 148 Chapter 10 Solve a problem ENWW Solve HP ePrint and HP Printables problems If you are having problems using Web Services, such as HP ePrint and print apps, check the following: ● Make sure the printer is connected to the Internet using an Ethernet or wireless connection. NOTE: You cannot use these web features if the printer is connected using a USB cable. ● Make sure the latest product updates have been installed on the printer. For more information, see Update the printer on page 36. ● Make sure Web Services is enabled on the printer. For more information, see Set up Web Services using the printer control panel on page 89. ● Make sure the network hub, switch, or router is turned on and working correctly. ● If you are connecting the printer using an Ethernet cable, make sure you are not connecting the printer using a phone cord or a crossover cable to connect the printer to the network and that the Ethernet cable is securely connected to the printer. For more information, see General network troubleshooting on page 150. ● If you are connecting the printer using a wireless connection, make sure the wireless network is functioning properly. For more information, see Unable to connect the printer wirelessly on page 150. ● If you are using HP ePrint, check the following: ● ◦ Make sure the printer's email address is correct. ◦ Make sure that the printer's email address is the only address listed in the “To” line of the email message. If other email addresses are listed in the “To” line, the attachments you are sending might not print. ◦ Make sure you are sending documents that meet the HP ePrint requirements. If your network uses proxy settings when connecting to the Internet, make sure the proxy settings you are entering are valid: ◦ Check the settings being used by the Web browser you are using (such as Internet Explorer, Firefox, or Safari). ◦ Check with the IT administrator or person who set up your firewall. If the proxy settings used by your firewall have changed, you must update these settings in either the printer control panel. If these settings are not updated, you will not be able to use Web Services. Learn how to work with your firewall and antivirus programs. Click here to go online for more information. TIP: For additional help on setting up and using Web Services, visit HP Connected at www.hpconnected.com. ENWW Solve HP ePrint and HP Printables problems 149 Solve network problems This section provides solutions to common problems on connecting or using the printer on the network. TIP: (Windows) If you're having trouble printing, run the HP Print and Scan Doctor to troubleshoot the issue automatically. The utility will try to diagnose and fix the issue. The HP Print and Scan Doctor may not be available in all languages. ● General network troubleshooting ● Unable to connect the printer wirelessly For more information about network problems, check the following: ● Learn how to find your network security settings. Click here to go online for more information. ● Learn about the network troubleshooting tips. Click here to go online for more information. ● Learn how to work with your firewall and antivirus programs during printer setup. Click here to go online for more information. General network troubleshooting If the installation program cannot discover the printer, from the printer control panel, print the network configuration page, and enter the IP address manually in the installation program. For more information, see Network configuration page on page 126. TIP: You can visit the HP online support website at www.hp.com/support for information and utilities that can help you correct many common printer problems. (Windows) If you're having trouble printing, run the HP Print and Scan Doctor to troubleshoot the issue automatically. The utility will try to diagnose and fix the issue. The HP Print and Scan Doctor may not be available in all languages. Ensure the following: ● Do not turn on the wireless capability of the printer prior to installing the HP printer software. Make sure the Wireless light is not on. ● When prompted during software installation, be sure to connect the Ethernet cable and check that the Ethernet light near the connector gets turned on. ● All cable connections to the computer and the printer are secure. ● The network is operational and the network hub, switch, or router is turned on. ● (Windows) All applications, including virus protection programs, spyware protection programs, and firewalls, are closed or disabled. Unable to connect the printer wirelessly Make sure you have already set up the printer wireless capabilities. For more information about the wireless connection setup, see Set up the printer for wireless communication on page 106. Step 1: Make sure the Wireless (802.11) light is turned on Understand the behaviors of the Wireless light on the printer. 150 Chapter 10 Solve a problem ENWW Light description/Light pattern Explanation The Wireless light is off. The wireless capability of the printer is turned off. The Wireless light is on but blinking. The wireless capability of the printer is turned on and the printer is not connected to a network. The Wireless light is on and solid. The wireless capability of the printer is turned on and the printer is connected to a network. If the blue wireless light on the printer control panel is not lit, the wireless capability of the printer might be turned off. NOTE: If your printer supports Ethernet networking, make sure that an Ethernet cable has not been connected to the printer. Connecting an Ethernet cable turns off the printer wireless capability. To turn on the wireless capability of the printer 1. Touch 2. Touch Wireless Settings. 3. Slide the button to turn on the printer wireless capability. (Wireless) from the printer control panel, and then touch Settings. If the blue wireless light is blinking, it means the printer is not connected to a network. Use the HP printer software to connect the printer wirelessly. Step 2: Make sure the computer is connected to the wireless network Make sure your computer is connected to your wireless network. If you cannot connect the computer to the network, there might be a hardware issue with the router or computer. Step 3: Run the wireless test To check that the wireless connection is working properly, print the wireless test report. ENWW Solve network problems 151 1. Make sure the printer is turned on and paper is loaded in the tray. 2. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 3. Touch Print Reports. 4. Touch Print Wireless Test Report. If the test fails, review the report for information on how to fix the problem and run the test again. TIP: If the wireless signal is weak or the printer has trouble staying connected, try moving the printer closer to the wireless router. Step 4: Restart components of the wireless network Turn off the router and the printer, and then turn them back on in this order: router first and then printer. Sometimes, turning off devices and then turning them back on help resolve network communication issues. If you still cannot connect, turn off the router, the printer, and the computer, and then turn them back on in this order: router first, then printer, and then computer. NOTE: If you still have problems, visit the HP Wireless Printing Center (www.hp.com/go/ wirelessprinting). (At this time, this website might not be available in all languages.) The website contains the latest information about setting up and using the printer on a wireless network, and resolving issues on wireless connection and security software. TIP: (Windows) If you're having trouble printing, run the HP Print and Scan Doctor to troubleshoot the issue automatically. The utility will try to diagnose and fix the issue. The HP Print and Scan Doctor may not be available in all languages. If the wireless connection cannot be made, the printer can also be connected to the network using an Ethernet cable. 152 Chapter 10 Solve a problem ENWW Solve printer management problems This section provides solutions to common problems that involve managing the printer. NOTE: To use the embedded web server, the printer must be connected to a network using either an Ethernet or a wireless connection. You cannot use the embedded web server if the printer is connected to a computer with a USB cable. TIP: You can visit the HP online support website at www.hp.com/support for information and utilities that can help you correct many common printer problems. Embedded web server cannot be opened Check your network setup ● Make sure you are not using a phone cord or a crossover cable to connect the printer to the network. ● Make sure the network cable is securely connected to the printer. ● Make sure the network hub, switch, or router is turned on and working correctly. Check the computer ● Make sure the computer that you are using is connected to the network. NOTE: To use the EWS, the printer must be connected to a network. You cannot use the embedded web server if the printer is connected to a computer with a USB cable. Check your web browser ● Make sure the web browser meets the minimum system requirements. For more information, see system requirements in the Readme file. ● If your web browser uses any proxy settings to connect to the Internet, try turning off these settings. For more information, see the documentation available with your web browser. ● Make sure JavaScript and cookies are enabled in your web browser. For more information, see the documentation available with your web browser. Check the printer IP address ● To check the IP address of the printer, obtain the IP address by printing a network configuration (Wireless), touch Settings, and then touch page. From the printer control panel display, touch Print Network Configuration. ● Ping the printer using the IP address from the command prompt (Windows) or from Network Utility (OS X). (Network Utility is located in the Utilities folder in the Applications folder at the top level of the hard disk.) For example, if the IP address is 123.123.123.123, type the following at the command prompt (Windows): C:\Ping 123.123.123.123 Or In Network Utility (OS X), click the Ping tab, type the 123.123.123.123 in the box, and then click Ping. If a reply appears, the IP address is correct. If a time-out response appears, the IP address is incorrect. ENWW Solve printer management problems 153 TIP: If you are using a computer running Windows, you can visit the HP online support website at www.hp.com/support. This website provides information and utilities that can help you correct many common printer problems. 154 Chapter 10 Solve a problem ENWW Printhead maintenance If you are experiencing problems with printing, you might have a problem with the printhead. You should perform the procedures in the following sections only when directed to do so for resolving print quality issues. Performing the aligning and cleaning procedures unnecessarily can waste ink and shorten the life of the cartridges. This section contains the following topics: ● Clean the printhead ● Align the printhead ● Calibrate the linefeed ● Reinstall the printhead Clean the printhead If your printed output is streaked or has any incorrect or missing colors, the printhead might need to be cleaned. There are two stages of cleaning. Each stage lasts about two minutes, uses one sheet of paper, and uses an increasing amount of ink. After each stage, review the quality of the printed page. You should only initiate the next phase of cleaning if the print quality is poor. If print quality still seems poor after you complete both stages of cleaning, try aligning the printer. If print quality problems persist after cleaning and aligning, contact HP support. For more information, see HP support on page 122. NOTE: Cleaning uses ink, so clean the printhead only when necessary. The cleaning process takes a few minutes. Some noise might be generated in the process. Before cleaning the printhead, make sure you load paper. For more information, see Load paper on page 23. Not turning the printer off correctly can cause print quality problems. For more information, see Turn the printer off on page 38. To clean the printhead from the control panel 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 3. Touch Tools, and then touch Clean Printhead. To clean the printhead from Toolbox (Windows) ENWW 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open Toolbox. For more information, see Open the Toolbox on page 116. 3. From the Device Services tab, click the icon to the left of Clean Printheads. 4. Follow the on-screen instructions. Printhead maintenance 155 To clean the printhead from HP Utility (OS X) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open HP Utility. For more information, see HP Utility (OS X) on page 117. 3. In the Information And Support section, click Clean Printheads. 4. Click Clean, and then follow the on-screen instructions. To clean the printhead from the embedded web server (EWS) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open the EWS. For more information, see Embedded web server on page 118. 3. Click the Tools tab, and then click Print Quality Toolbox in the Utilities section. 4. Click Clean Printhead and follow the on-screen instructions. Align the printhead The printer automatically aligns the printhead during the initial setup. You might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. To align the printhead from the control panel 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 3. Touch Tools, and then select Align Printhead. To align the printhead from Toolbox (Windows) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open Toolbox. For more information, see Open the Toolbox on page 116. 3. From the Device Services tab, click the icon to the left of Align Printheads. 4. Follow the on-screen instructions. To align the printhead from HP Utility (OS X) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open HP Utility. For more information, see HP Utility (OS X) on page 117. 3. In the Information And Support section, click Align Printhead. 4. Click Align, and then follow the on-screen instructions. 156 Chapter 10 Solve a problem ENWW To align the printhead from the embedded web server (EWS) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open the EWS. For more information, see Embedded web server on page 118. 3. Click the Tools tab, and then click Print Quality Toolbox in the Utilities section. 4. Click Align Printer and follow the on-screen instructions. Calibrate the linefeed If you are still seeing streaks and white lines, after aligning the printhead, then calibrate the linefeed. To calibrate the linefeed from the control panel 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 3. Touch Tools, and then touch Calibrate Linefeed. To calibrate the linefeed from Toolbox (Windows) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open Toolbox. For more information, see Open the Toolbox on page 116. 3. From the Device Services tab, click the icon to the left of Linefeed Calibration. 4. Follow the on-screen instructions. To calibrate the linefeed from the embedded web server (EWS) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size paper on page 23. 2. Open the EWS. For more information, see Embedded web server on page 118. 3. Click the Tools tab, and then click Print Quality Toolbox in the Utilities section. 4. Click Calibrate Linefeed and follow the on-screen instructions. Reinstall the printhead This procedure should only be performed when a Missing or Failed Printhead message has been seen and the printer has first been turned off and then back on to try to resolve the message. If the message persists, try this procedure. To reinstall the printhead 1. ENWW Make sure that the printer is turned on. Printhead maintenance 157 2. Open the ink cartridge access door. 3. Lift the latch handle on the print carriage. 4. Remove the printhead by lifting it up and then pulling it out of the printer. 5. Make sure the latch handle is raised, and then reinsert the printhead. 6. Carefully lower the latch handle. NOTE: Make sure you lower the latch handle before reinserting the ink cartridges. Leaving the latch handle raised can result in incorrectly seated ink cartridges and problems printing. The latch must remain down in order to correctly install the ink cartridges. 7. Close the ink cartridge access door. 158 Chapter 10 Solve a problem ENWW Clear jams Occasionally, paper becomes jammed during a job. Paper jams can occur either inside the printer or in the automatic document feeder. CAUTION: To prevent possible damage to the printhead, clear paper jams as soon as possible. TIP: If you notice poor print quality, clean the printhead. For more information, see Clean the printhead on page 155. ● Clear paper jams inside the printer ● Clear paper jams in the automatic document feeder ● Avoid paper jams Clear paper jams inside the printer 1. Remove all paper from the output tray. CAUTION: Trying to clear a paper jam from the front of the printer can damage the print mechanism. Always access and clear paper jams through the automatic two-sided printing accessory (duplexer). 2. Check the duplexer. a. Push the buttons on either side of the duplexer, and then remove the duplexer. b. Locate any jammed paper inside the printer, grasp it with both hands, and then pull it towards you. CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the printer. If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur. 3. ENWW c. If the jam is not there, push the latch on top of the duplexer and lower the cover. If paper is jammed inside, carefully remove it. Close the cover. d. Reinsert the duplexer into the printer until it snaps into place. If you have not found the jam and have Tray 2 installed, pull out the tray and remove the jammed paper, if possible. If not, do the following: a. Ensure the printer is turned off and disconnect the power cord. b. Lift the printer off Tray 2. c. Remove the jammed paper from the bottom of the printer or from Tray 2. d. Reposition the printer on the top of Tray 2. Clear jams 159 4. Open the ink cartridge access door. If there is paper remaining inside the printer, ensure the carriage has moved to the right of the printer, free any paper scraps or wrinkled paper, and pull the paper towards you through the top of the printer. WARNING! Do not reach into the printer when it is turned on and the carriage is stuck. When you open the ink cartridge access door, the carriage should return to its position on the right side of the printer. If it does not move to the right, turn off the printer before you remove any jam. 5. After clearing the jam, close all covers, turn on the printer (if you turned it off) and resend the print job. If the above solutions do not resolve the problem, click here for more online troubleshooting. Clear paper jams in the automatic document feeder 1. Lift the cover of the automatic document feeder. 2. Lift the tab located on the front edge of the ADF. - OR Push the green tab located in the center of the automatic document feeder. 3. Gently pull the paper out of the rollers. CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the printer. If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur. 160 Chapter 10 Solve a problem ENWW 4. If you have pushed the green tab in step 2, pull it back in place. 5. Close the cover of the automatic document feeder, pressing down firmly until it snaps into place. If the above solutions do not resolve the problem, click here for more online troubleshooting. Avoid paper jams To help avoid paper jams, follow these guidelines. ENWW ● Remove printed papers from the output tray frequently. ● Make sure that you are printing with paper that is not wrinkled, folded, or damaged. ● Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag. ● Do not use paper that is too thick or too thin for the printer. ● Make sure that the trays are loaded correctly and are not too full. For more information, see Load paper on page 23. ● Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn. ● Do not place too much paper in the document feeder tray. For information on the maximum number of sheets allowed in the automatic document feeder, see Paper size and weights on page 166. ● Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type. ● Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the paper-width guides do not bend the paper in the input tray. ● Do not force paper too far forward in the input tray. ● If you are printing on both sides of a page, do not print highly saturated images on light weight paper. ● Use paper types that are recommended for the printer. For more information, see Paper size and weights on page 166. ● If the printer is about to run out of paper, allow the printer to run out of paper first, and then add paper. Do not try to add paper when the printer is trying to pick up a sheet. ● Make sure that the printer is clean. For more information, see Maintain the printer on page 34. Clear jams 161 Clear the print carriage Remove any objects, such as paper, that are blocking the print carriage. See Clear jams on page 159 for more information. NOTE: Do not use any tools or other devices to remove jammed paper. Always use caution when removing jammed paper from inside the printer. Click here to go online for more information. 162 Chapter 10 Solve a problem ENWW A Technical information This section contains the following topics: ENWW ● Warranty information ● Specifications ● Regulatory information ● Environmental product stewardship program 163 Warranty information This section contains the following topics: ● Ink cartridge warranty information Ink cartridge warranty information The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with. During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached. The end of warranty date, in YYYY-MM format, may be found on the product as indicated: 164 Appendix A Technical information ENWW Specifications For more information, visit www.hp.com/support. Select your country or region. Click Product Support & Troubleshooting. Enter the name shown on the front of the printer, and then select Search. Click Product information, and then click Product specifications. ● System requirements ● Environmental specifications ● Input tray capacity ● Output tray capacity ● Paper size and weights ● Print specifications ● Copy specifications ● Scan specifications ● Fax specifications ● Cartridge yield ● Acoustic emission specifications System requirements Software and system requirements can be found in the Readme file, which is available on the HP printer software CD provided with your printer. For information about future operating system releases and support, visit the HP online support website at www.hp.com/support. Environmental specifications Operating temperature: 5° to 40° C (41° to 104° F) Operating humidity: 15 to 80% RH non-condensing Recommended operating conditions: 15° to 32° C (59° to 90° F) Recommended relative humidity: 20 to 80% noncondensing Input tray capacity ● Main input tray Plain paper sheets: Up to 250 Envelopes: Up to 30 Index cards: Up to 80 Photo paper sheets: Up to 100 ● Tray 2 Plain paper sheets (60 to 105 g/m2 [16 to 28 lb]): Up to 250 NOTE: Tray 2 supports only plain paper. ENWW Specifications 165 Output tray capacity ● Plain paper sheets: Up to 150 ● Envelopes: Up to 30 ● Index cards: Up to 80 ● Photo paper sheets: Up to 100 Paper size and weights For the list of supported paper sizes, see the HP printer software. ● Plain paper: 60 to 105 g/m2 (16 to 28 lb) ● Envelopes: 75 to 90 g/m2 (20 to 24 lb) ● Cards: Up to 200 g/m2 (110-lb index maximum) ● Photo paper: 280 g/m2 (75 lb) Print specifications ● Print speeds vary according to the complexity of the document and printer model ● Method: drop-on-demand thermal officejet ● Language: PCL3 GUI ● Print resolution: Draft mode Normal mode Plain-Best mode Photo-Best mode Max DPI mode ● Color Input/Black Render: 300x300dpi ● Output (Black/Color): Automatic ● Color Input/Black Render: 600x600dpi ● Output (Black/Color): Automatic ● Color Input/Black Render: 600x600dpi ● Output (Black/Color): Automatic ● Color Input/Black Render: 600x600dpi ● Output (Black/Color): Automatic ● Color Input/Black Render: 1200x1200dpi ● Output: Automatic (Black), 4800x1200 optimized dpi (Color) Copy specifications ● Digital image processing ● Copy speeds vary according to the complexity of the document and printer model Scan specifications ● Resolution: Up to 1200 x 1200 ppi optical For more information about scan resolution, see the HP printer software. ● Color: 24-bit color, 8-bit grayscale (256 levels of gray) 166 Appendix A Technical information ENWW ● ● Maximum scan size from scanner glass: ◦ U.S. Letter (A): 215.9 x 279.4 mm (8.5 inches x 11 inches) ◦ U.S. Legal (HP Officejet Pro 8620 and HP Officejet Pro 8630 only): 215.9 x 355.6 mm (8.5 inches x 14 inches) ◦ ISO A4: 210 x 297mm (8.27 inches x 11.7 inches) Maximum scan size from ADF: ◦ ADF: 216 x 356 mm (8.5 x 14 inches) Fax specifications ● Walk-up black-and-white and color fax capability. ● Up to 99 speed dials. ● Up to 100-page memory (based on ITU-T Test Image #1 at standard resolution). More complicated pages or higher resolution takes longer and uses more memory. ● Manual fax send and receive. ● Automatic busy redial up to five times (varies by model). ● Automatic no-answer redial one time (varies by model). ● Confirmation and activity reports. ● CCITT/ITU Group 3 fax with Error Correction Mode. ● 33.6 Kbps transmission. ● 4 seconds per page speed at 33.6 Kbps (based on ITU-T Test Image #1 at standard resolution). More complicated pages or higher resolution takes longer and uses more memory. ● Ring detect with automatic fax/answering machine switching. Photo (dpi) Very Fine (dpi) Fine (dpi) Standard (dpi) Black 205 x 196 (8-bit grayscale) 308 x 300 205 x 196 205 x 98 Color 205 x 200 205 x 200 205 x 200 205 x 200 HP Digital Fax Specifications ● Supported file type: Uncompressed TIFF ● Supported fax types: black-and-white faxes Cartridge yield Visit www.hp.com/go/learnaboutsupplies/ for more information on estimated cartridge yields. Acoustic emission specifications Visit www.hp.com/support. Select your country or region. Click Product Support & Troubleshooting. Enter the name shown on the front of the printer, and then select Search. Click Product information, and then click Product specifications. ● ENWW Sound pressure (bystander position) Specifications 167 ◦ ● LpAm 55 (dBA) (mono Draft print) Sound power ◦ LwAd 6.8 (BA) 168 Appendix A Technical information ENWW Regulatory information The printer meets product requirements from regulatory agencies in your country/region. This section contains the following topics: ● Regulatory Model Number ● FCC statement ● Notice to users in Korea ● VCCI (Class B) compliance statement for users in Japan ● Notice to users in Japan about the power cord ● Noise emission statement for Germany ● Visual display workplaces statement for Germany ● Notice to users of the U.S. telephone network: FCC requirements ● Notice to users of the Canadian telephone network ● Notice to users in the European Economic Area ● Notice to users of the German telephone network ● Australia wired fax statement ● European Union Regulatory Notice ● Declaration of conformity ● Regulatory information for wireless products Regulatory Model Number For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRC-1401-02. This regulatory number should not be confused with the marketing name (HP Officejet Pro 8610 e-All-in-One, HP Officejet Pro 8620 e-Allin-One, and HP Officejet Pro 8630 e-All-in-One) or product number (A7F64A, A7F65A, or A7F66A). NOTE: ENWW The printer availability varies by country or region. Regulatory information 169 FCC statement Notice to users in Korea VCCI (Class B) compliance statement for users in Japan Notice to users in Japan about the power cord 170 Appendix A Technical information ENWW Noise emission statement for Germany Visual display workplaces statement for Germany Notice to users of the U.S. telephone network: FCC requirements ENWW Regulatory information 171 Notice to users of the Canadian telephone network Notice to users in the European Economic Area 172 Appendix A Technical information ENWW Notice to users of the German telephone network Australia wired fax statement European Union Regulatory Notice Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable: Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC, Ecodesign Directive 2009/125/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following website: www.hp.com/go/certificates (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is: Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY Products with external AC Adapters CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP. Products with wireless functionality EMF ● This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation. If it incorporates a radio transmitting and receiving device then in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Wireless functionality in Europe ● ENWW This product is designed for use without restrictions in all EU countries plus Iceland, Liechtenstein, Norway and Switzerland. Regulatory information 173 European telephone network declaration (Modem/Fax) HP products with FAX capability comply with the requirements of the R&TTE Directive 1999/5/EC (Annex II) and carry the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Declaration of conformity Regulatory information for wireless products This section contains the following regulatory information pertaining to wireless products: ● Exposure to radio frequency radiation ● Notice to users in Brazil ● Notice to users in Canada 174 Appendix A Technical information ENWW ● Notice to users in Taiwan ● Notice to users in Mexico ● Wireless notice to users in Japan Exposure to radio frequency radiation Notice to users in Brazil Notice to users in Canada ENWW Regulatory information 175 Notice to users in Taiwan Notice to users in Mexico Wireless notice to users in Japan 176 Appendix A Technical information ENWW Environmental product stewardship program Hewlett-Packard is committed to providing quality products in an environmentally sustainable manner: ● Design for recycling has been incorporated into this product. ● The number of materials has been kept to a minimum while ensuring proper functionality and reliability. ● Dissimilar materials have been designed to separate easily. ● Fasteners and other connections are easy to locate, access, and remove using common tools. ● High priority parts have been designed to access quickly for efficient disassembly and repair. For more information, visit www.hp.com/ecosolutions This section contains the following topics: ● Paper use ● Plastics ● Material safety data sheets ● Recycling program ● HP inkjet supplies recycling program ● Disposal of waste equipment by users ● Power consumption ● Chemical substances ● Battery disposal in the Netherlands ● Battery disposal in the Taiwan ● California Perchlorate Material Notice ● Toxic and hazardous substance table (China) ● Restriction of hazardous substance (Ukraine) ● Restriction of hazardous substance (India) ● EPEAT ● China SEPA Ecolabel User Information Paper use This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002. Plastics Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life. Material safety data sheets Material safety data sheets (MSDS) can be obtained from the HP website at: ENWW Environmental product stewardship program 177 www.hp.com/go/msds Recycling program HP offers an increasing number of product return and recycling programs in many countries/regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information regarding recycling of HP products, please visit: www.hp.com/recycle HP inkjet supplies recycling program HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more information, go to the following website: www.hp.com/hpinfo/globalcitizenship/environment/recycle/ Disposal of waste equipment by users This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service, or go to http://www.hp.com/recycle. Power consumption Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is qualified to the U.S. Environmental Protection Agency’s ENERGY STAR specifications for imaging equipment. The following mark will appear on ENERGY STAR qualified imaging products: Additional ENERGY STAR qualified imaging product model information is listed at: www.hp.com/go/ energystar Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/reach. 178 Appendix A Technical information ENWW Battery disposal in the Netherlands Battery disposal in the Taiwan California Perchlorate Material Notice Toxic and hazardous substance table (China) Restriction of hazardous substance (Ukraine) ENWW Environmental product stewardship program 179 Restriction of hazardous substance (India) EPEAT China SEPA Ecolabel User Information 180 Appendix A Technical information ENWW B Additional fax setup After completing all the steps in the getting started guide, use the instructions in this section to complete your fax setup. Keep your getting started guide for later use. In this section, you learn how to set up the printer so that faxing works successfully with equipment and services you might already have on the same phone line. TIP: You can also use the Fax Setup Wizard (Windows) or HP Utility (OS X) to help you quickly set up some important fax settings such as the answer mode and fax header information. You can access these tools through the HP software you installed with the printer. After you run these tools, follow the procedures in this section to complete your fax setup. This section contains the following topics: ENWW ● Set up faxing (parallel phone systems) ● Serial-type fax setup ● Test fax setup 181 Set up faxing (parallel phone systems) Before you begin setting up the printer for faxing, determine which kind of phone system your country/ region uses. The instructions for fax setup differ depending on whether you have a serial- or paralleltype phone system. ● If you do not see your country/region listed in the table, you probably have a serial-type phone system. In a serial-type phone system, the connector type on your shared telephone equipment (modems, phones, and answering machines) does not allow a physical connection to the "2EXT" port on the printer. Instead, all equipment must be connected at the telephone wall jack. NOTE: In some countries/regions that use serial-type phone systems, the phone cord that came with the printer might have an additional wall plug attached to it. This enables you to connect other telecom devices to the wall jack where you plug in the printer. You might need to connect the supplied phone cord to the adapter provided for your country/ region. ● If your country/region is listed in the table, you probably have a parallel-type telephone system. In a parallel-type phone system, you are able to connect shared telephone equipment to the phone line by using the "2-EXT" port on the back of the printer. NOTE: If you have a parallel-type phone system, HP recommends you use the 2-wire phone cord supplied with the printer to connect it to the telephone wall jack. Table B-1 Countries/regions with a parallel-type phone system Argentina Australia Brazil Canada Chile China Colombia Greece India Indonesia Ireland Japan Korea Latin America Malaysia Mexico Philippines Poland Portugal Russia Saudi Arabia Singapore Spain Taiwan Thailand USA Venezuela Vietnam If you are unsure which kind of telephone system you have (serial or parallel), check with your telephone company. This section contains the following topics: ● Select the correct fax setup for your home or office ● Case A: Separate fax line (no voice calls received) ● Case B: Set up the printer with DSL ● Case C: Set up the printer with a PBX phone system or an ISDN line ● Case D: Fax with a distinctive ring service on the same line ● Case E: Shared voice/fax line 182 Appendix B Additional fax setup ENWW ● Case F: Shared voice/fax line with voice mail ● Case G: Fax line shared with computer modem (no voice calls received) ● Case H: Shared voice/fax line with computer modem ● Case I: Shared voice/fax line with answering machine ● Case J: Shared voice/fax line with computer modem and answering machine ● Case K: Shared voice/fax line with computer dial-up modem and voice mail Select the correct fax setup for your home or office To fax successfully, you need to know what types of equipment and services (if any) share the same phone line with the printer. This is important because you might need to connect some of your existing office equipment directly to the printer, and you might also need to change some fax settings before you can fax successfully. 1. Determine if your telephone system is serial or parallel. For more information, see Set up faxing (parallel phone systems) on page 182. 2. 3. ENWW a. Serial-type telephone system—See Serial-type fax setup on page 203. b. Parallel-type telephone system—Go to step 2. Select the combination of equipment and services sharing your fax line. ● DSL: A Digital subscriber line (DSL) service through your telephone company. (DSL might be called ADSL in your country/region.) ● PBX: A private branch exchange (PBX) phone system or an integrated services digital network (ISDN) system. ● Distinctive ring service: A distinctive ring service through your telephone company provides multiple telephone numbers with different ring patterns. ● Voice calls: Voice calls are received at the same phone number you use for fax calls on the printer. ● Computer dial-up modem: A computer dial-up modem is on the same phone line as the printer. If you answer Yes to any of the following questions, you are using a computer dialup modem: ◦ Do you send and receive faxes directly to and from your computer software applications through a dial-up connection? ◦ Do you send and receive email messages on your computer through a dial-up connection? ◦ Do you access the Internet from your computer through a dial-up connection? ● Answering machine: An answering machine that answers voice calls at the same phone number you use for fax calls on the printer. ● Voice mail service: A voice mail subscription through your telephone company at the same number you use for fax calls on the printer. From the following table, select the combination of equipment and services applicable to your home or office setting. Then look up the recommended fax setup. Step-by-step instructions are included for each case in the sections that follow. Set up faxing (parallel phone systems) 183 NOTE: If your home or office setup is not described in this section, set up the printer as you would a regular analog phone. Make sure you use the phone cord supplied in the box to connect one end to your telephone wall jack and the other end to the port labeled 1-LINE on the back of the printer. If you use another phone cord, you might experience problems sending and receiving faxes. You might need to connect the supplied phone cord to the adapter provided for your country/region. Other equipment or services sharing your fax line DSL PBX Distinctive ring service Voice calls Computer dialup modem Recommended fax setup Answering machine Voice mail service Case A: Separate fax line (no voice calls received) on page 184 Case B: Set up the printer with DSL on page 185 Case C: Set up the printer with a PBX phone system or an ISDN line on page 186 Case D: Fax with a distinctive ring service on the same line on page 187 Case E: Shared voice/fax line on page 188 Case F: Shared voice/fax line with voice mail on page 189 Case G: Fax line shared with computer modem (no voice calls received) on page 190 Case H: Shared voice/fax line with computer modem on page 193 Case I: Shared voice/fax line with answering machine on page 196 Case J: Shared voice/fax line with computer modem and answering machine on page 197 Case K: Shared voice/fax line with computer dial-up modem and voice mail on page 201 Case A: Separate fax line (no voice calls received) If you have a separate phone line on which you receive no voice calls, and you have no other equipment connected on this phone line, set up the printer as described in this section. 184 Appendix B Additional fax setup ENWW Figure B-1 Back view of the printer 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/ region. To set up the printer with a separate fax line 1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 2. Turn on the Auto Answer setting. 3. (Optional) Change the Rings to Answer setting to the lowest setting (two rings). 4. Run a fax test. When the phone rings, the printer answers automatically after the number of rings you set in the Rings to Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the fax. Case B: Set up the printer with DSL If you have a DSL service through your telephone company, and do not connect any equipment to the printer, use the instructions in this section to connect a DSL filter between the telephone wall jack and the printer. The DSL filter removes the digital signal that can interfere with the printer, so the printer can communicate correctly with the phone line. (DSL might be called ADSL in your country/ region.) NOTE: If you have a DSL line and you do not connect the DSL filter, you cannot send and receive faxes with the printer. ENWW Set up faxing (parallel phone systems) 185 Figure B-2 Back view of the printer 1 Telephone wall jack 2 DSL (or ADSL) filter and cord supplied by your DSL provider 3 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/ region. To set up the printer with DSL 1. Obtain a DSL filter from your DSL provider. 2. Using the phone cord supplied in the box with the printer, connect one end to the open port on the DSL filter, and then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the DSL filter to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. As only one phone cord is supplied, you might need to obtain additional phone cords for this setup. 3. Connect an additional phone cord from the DSL filter to the telephone wall jack. 4. Run a fax test. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case C: Set up the printer with a PBX phone system or an ISDN line If you are using either a PBX phone system or an ISDN converter/terminal adapter, make sure you do the following: ● If you are using either a PBX or an ISDN converter/terminal adaptor, connect the printer to the port that is designated for fax and phone use. Also, make sure that the terminal adapter is set to the correct switch type for your country/region, if possible. 186 Appendix B Additional fax setup ENWW NOTE: Some ISDN systems allow you to configure the ports for specific phone equipment. For example, you might have assigned one port for telephone and Group 3 fax and another port for multiple purposes. If you have problems when connected to the fax/phone port of your ISDN converter, try using the port designated for multiple purposes; it might be labeled "multi-combi" or something similar. ● If you are using a PBX phone system, set the call waiting tone to "off." NOTE: Many digital PBX systems include a call-waiting tone that is set to "on" by default. The call waiting tone interferes with any fax transmission, and you cannot send or receive faxes with the printer. Refer to the documentation that came with your PBX phone system for instructions on how to turn off the call-waiting tone. ● If you are using a PBX phone system, dial the number for an outside line before dialing the fax number. ● Make sure you use the supplied cord to connect from the telephone wall jack to the printer. If you do not, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. If the supplied phone cord is too short, you can purchase a longer 2-wire phone cord from your local electronics store and extend it. You might need to connect the supplied phone cord to the adapter provided for your country/ region. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case D: Fax with a distinctive ring service on the same line If you subscribe to a distinctive ring service (through your telephone company) that allows you to have multiple phone numbers on one phone line, each with a different ring pattern, set up the printer as described in this section. Figure B-3 Back view of the printer 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/ region. ENWW Set up faxing (parallel phone systems) 187 To set up the printer with a distinctive ring service 1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 2. Turn on the Auto Answer setting. 3. Change the Distinctive Ring setting to match the pattern that the telephone company assigned to your fax number. NOTE: By default, the printer is set to answer all ring patterns. If you do not set the Distinctive Ring to match the ring pattern assigned to your fax number, the printer might answer both voice calls and fax calls or it might not answer at all. TIP: You can also use the Ring Pattern Detection feature in the printer control panel to set distinctive ring. With this feature, the printer recognizes and records the ring pattern of an incoming call and, based on this call, automatically determines the distinctive ring pattern assigned by your telephone company to fax calls. For more information, see Change the answer ring pattern for distinctive ring on page 78. 4. (Optional) Change the Rings to Answer setting to the lowest setting (two rings). 5. Run a fax test. The printer automatically answers incoming calls that have the ring pattern you selected (Distinctive Ring setting) after the number of rings you selected (Rings to Answer setting). The printer begins emitting fax reception tones to the sending fax machine and receives the fax. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case E: Shared voice/fax line If you receive both voice calls and fax calls at the same phone number, and you have no other office equipment (or voice mail) on this phone line, set up the printer as described in this section. Figure B-4 Back view of the printer 1 Telephone wall jack 188 Appendix B Additional fax setup ENWW 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/ region. 3 Telephone (optional) To set up the printer with a shared voice/fax line 1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 2. 3. 4. Do one of the following: ● If you have a parallel-type phone system, remove the white plug from the port labeled 2EXT on the back of the printer, and then connect a phone to this port. ● If you have a serial-type phone system, you might plug your phone directly on top of the printer cable which has a wall plug attached to it. Now you need to decide how you want the printer to answer calls, automatically or manually: ● If you set up the printer to answer calls automatically, it answers all incoming calls and receives faxes. The printer cannot distinguish between fax and voice calls in this case; if you suspect the call is a voice call, you need to answer it before the printer answers the call. To set up the printer to answer calls automatically, turn on the Auto Answer setting. ● If you set up the printer to answer faxes manually, you must be available to respond in person to incoming fax calls or the printer cannot receive faxes. To set up the printer to answer calls manually, turn off the Auto Answer setting. Run a fax test. If you pick up the phone before the printer answers the call and hear fax tones from a sending fax machine, you need to answer the fax call manually. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case F: Shared voice/fax line with voice mail If you receive both voice calls and fax calls at the same phone number, and you also subscribe to a voice mail service through your telephone company, set up the printer as described in this section. NOTE: You cannot receive faxes automatically if you have a voice mail service at the same phone number you use for fax calls. You must receive faxes manually; this means you must be available to respond in person to incoming fax calls. If you want to receive faxes automatically instead, contact your telephone company to subscribe to a distinctive ring service, or to obtain a separate phone line for faxing. ENWW Set up faxing (parallel phone systems) 189 Figure B-5 Back view of the printer 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/ region. To set up the printer with voice mail 1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. You might need to connect the supplied phone cord to the adapter provided for your country/ region. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 2. Turn off the Auto Answer setting. 3. Run a fax test. You must be available to respond in person to incoming fax calls, or the printer cannot receive faxes. You must initiate the manual fax before voicemail picks up the line. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case G: Fax line shared with computer modem (no voice calls received) If you have a fax line on which you receive no voice calls, and you also have a computer modem connected on this line, set up the printer as described in this section. NOTE: If you have a computer dial-up modem, your computer dial-up modem shares the phone line with the printer. You cannot use both your modem and the printer simultaneously. For example, you cannot use the printer for faxing while you are using your computer dial-up modem to send an email or access the Internet. ● Set up the printer with a computer dial-up modem ● Set up the printer with a computer DSL/ADSL modem 190 Appendix B Additional fax setup ENWW Set up the printer with a computer dial-up modem If you are using the same phone line for sending faxes and for a computer dial-up modem, follow these directions for setting up the printer. Figure B-6 Back view of the printer 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/ region. 3 Computer with modem To set up the printer with a computer dial-up modem 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the printer. 3. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 4. If your modem software is set to receive faxes to your computer automatically, turn off that setting. NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer cannot receive faxes. 5. Turn on the Auto Answer setting. 6. (Optional) Change the Rings to Answer setting to the lowest setting (two rings). 7. Run a fax test. When the phone rings, the printer automatically answers after the number of rings you set in the Rings to Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the fax. ENWW Set up faxing (parallel phone systems) 191 If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Set up the printer with a computer DSL/ADSL modem If you have a DSL line and use that phone line to send faxes, follow these instructions to set up your fax. 1 Telephone wall jack 2 Parallel splitter 3 DSL/ADSL filter Connect one end of the phone jack that was supplied with the printer to connect to the 1-LINE port on the back of the printer. Connect the other end of the cord to the DSL/ADSL filter. You might need to connect the supplied phone cord to the adapter provided for your country/ region. 4 Computer 5 Computer DSL/ADSL modem NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back. Figure B-7 Example of a parallel splitter To set up the printer with a computer DSL/ADSL modem 1. Obtain a DSL filter from your DSL provider. 2. Using the phone cord provided in the box with the printer, connect one end to the DSL filter, and then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the DSL filter to the back of the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 3. Connect the DSL filter to the parallel splitter. 192 Appendix B Additional fax setup ENWW 4. Connect the DSL modem to the parallel splitter. 5. Connect the parallel splitter to the wall jack. 6. Run a fax test. When the phone rings, the printer automatically answers after the number of rings you set in the Rings to Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the fax. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case H: Shared voice/fax line with computer modem There are two different ways to set up the printer with your computer based on the number of phone ports on your computer. Before you begin, check your computer to see if it has one or two phone ports. NOTE: If your computer has only one phone port, you need to purchase a parallel splitter (also called a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.) ● Shared voice/fax with computer dial-up modem ● Shared voice/fax with computer DSL/ADSL modem Shared voice/fax with computer dial-up modem If you use your phone line for both fax and telephone calls, use these instructions to set up your fax. There are two different ways to set up the printer with your computer based on the number of phone ports on your computer. Before you begin, check your computer to see if it has one or two phone ports. NOTE: If your computer has only one phone port, you need to purchase a parallel splitter (also called a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.) Figure B-8 Example of a parallel splitter To set up the printer on the same phone line as a computer with two phone ports Figure B-9 Back view of the printer ENWW Set up faxing (parallel phone systems) 193 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. 3 Parallel splitter 4 Computer with modem 5 Telephone 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the printer. 3. Connect a phone to the "OUT" port on the back of your computer dial-up modem. 4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 5. If your modem software is set to receive faxes to your computer automatically, turn off that setting. NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer cannot receive faxes. 6. 7. Now you need to decide how you want the printer to answer calls, automatically or manually: ● If you set up the printer to answer calls automatically, it answers all incoming calls and receives faxes. The printer cannot distinguish between fax and voice calls in this case; if you suspect the call is a voice call, you need to answer it before the printer answers the call. To set up the printer to answer calls automatically, turn on the Auto Answer setting. ● If you set up the printer to answer faxes manually, you must be available to respond in person to incoming fax calls or the printer cannot receive faxes. To set up the printer to answer calls manually, turn off the Auto Answer setting. Run a fax test. If you pick up the phone before the printer answers the call and hear fax tones from a sending fax machine, you need to answer the fax call manually. If you use your phone line for voice, fax, and your computer dial-up modem, follow these directions to set up your fax. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Shared voice/fax with computer DSL/ADSL modem Use these instructions if your computer has a DSL/ADSL modem 194 Appendix B Additional fax setup ENWW 1 Telephone wall jack 2 Parallel splitter 3 DSL/ADSL filter 4 Use the phone cord provided to connect to the 1-LINE port on the back of the printer. You might need to connect the supplied phone cord to the adapter provided for your country/ region. 5 DSL/ADSL modem 6 Computer 7 Telephone NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back. Figure B-10 Example of a parallel splitter To set up the printer with a computer DSL/ADSL modem 1. Obtain a DSL filter from your DSL provider. NOTE: Phones in other parts of the home/office sharing the same phone number with DSL service need to be connected to additional DSL filters to avoid noise when making voice calls. 2. Using the phone cord supplied in the box with the printers, connect one end to the DSL filter, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the DSL filter to the printer, you might not be able to fax successfully. This special phone cord is different from phone cords you might already have in your home or office. 3. ENWW If you have a parallel-type phone system, remove the white plug from the port labeled 2-EXT on the back of the printer, and then connect a phone to this port. Set up faxing (parallel phone systems) 195 4. Connect the DSL filter to the parallel splitter. 5. Connect the DSL modem to the parallel splitter. 6. Connect the parallel splitter to the wall jack. 7. Run a fax test. When the phone rings, the printer automatically answers after the number of rings you set in the Rings to Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the fax. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case I: Shared voice/fax line with answering machine If you receive both voice calls and fax calls at the same phone number, and you also have an answering machine that answers voice calls at this phone number, set up the printer as described in this section. Figure B-11 Back view of the printer 1 Telephone wall jack 2 Use the phone cord provided to connect to the 1-LINE port on the back of the printer You might need to connect the supplied phone cord to the adapter provided for your country/ region. 3 Answering machine 4 Telephone (optional) To set up the printer with a shared voice/fax line with answering machine 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Unplug your answering machine from the telephone wall jack, and connect it to the port labeled 2-EXT on the back of the printer. NOTE: If you do not connect your answering machine directly to the printer, fax tones from a sending fax machine might be recorded on your answering machine, and you might not receive faxes with the printer. 196 Appendix B Additional fax setup ENWW 3. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 4. (Optional) If your answering machine does not have a built-in phone, for convenience you might want to connect a phone to the back of your answering machine at the "OUT" port. NOTE: If your answering machine does not let you connect an external phone, you can purchase and use a parallel splitter (also known as a coupler) to connect both the answering machine and telephone to the printer. You can use standard phone cords for these connections. 5. Turn on the Auto Answer setting. 6. Set your answering machine to answer after a low number of rings. 7. Change the Rings to Answer setting on the printer to the maximum number of rings supported by your printer. (The maximum number of rings varies by country/region.) 8. Run a fax test. When the phone rings, your answering machine answers after the number of rings you have set, and then plays your recorded greeting. The printer monitors the call during this time, "listening" for fax tones. If incoming fax tones are detected, the printer emits fax reception tones and receives the fax; if there are no fax tones, the printer stops monitoring the line and your answering machine can record a voice message. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case J: Shared voice/fax line with computer modem and answering machine If you receive both voice calls and fax calls at the same phone number, and you also have a computer modem and answering machine connected on this phone line, set up the printer as described in this section. NOTE: Since your computer dial-up modem shares the phone line with the printer, you cannot use both your modem and the printer simultaneously. For example, you cannot use the printer for faxing while you are using your computer dial-up modem to send an email or access the Internet. ● Shared voice/fax line with computer dial-up modem and answering machine ● Shared voice/fax line with computer DSL/ADSL modem and answering machine Shared voice/fax line with computer dial-up modem and answering machine There are two different ways to set up the printer with your computer based on the number of phone ports on your computer. Before you begin, check your computer to see if it has one or two phone ports. NOTE: If your computer has only one phone port, you need to purchase a parallel splitter (also called a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.) ENWW Set up faxing (parallel phone systems) 197 Figure B-12 Example of a parallel splitter To set up the printer on the same phone line as a computer with two phone ports Figure B-13 Back view of the printer 1 Telephone wall jack 2 "IN" phone port on your computer 3 "OUT" phone port on your computer 4 Telephone (optional) 5 Answering machine 6 Computer with modem 7 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/ region. 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the printer. 3. Unplug your answering machine from the telephone wall jack, and connect it to the port labeled "OUT" on the back of the computer (the computer dial-up modem). 4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 198 Appendix B Additional fax setup ENWW 5. (Optional) If your answering machine does not have a built-in phone, for convenience you might want to connect a phone to the back of your answering machine at the "OUT" port. NOTE: If your answering machine does not let you connect an external phone, you can purchase and use a parallel splitter (also known as a coupler) to connect both the answering machine and telephone to the printer. You can use standard phone cords for these connections. 6. If your modem software is set to receive faxes to your computer automatically, turn off that setting. NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer cannot receive faxes. 7. Turn on the Auto Answer setting. 8. Set your answering machine to answer after a low number of rings. 9. Change the Rings to Answer setting on the printer to the maximum number of rings supported by the product. (The maximum number of rings varies by country/region.) 10. Run a fax test. When the phone rings, your answering machine answers after the number of rings you have set, and then plays your recorded greeting. The printer monitors the call during this time, "listening" for fax tones. If incoming fax tones are detected, the printer emits fax reception tones and receives the fax; if there are no fax tones, the printer stops monitoring the line and your answering machine can record a voice message. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Shared voice/fax line with computer DSL/ADSL modem and answering machine 1 Telephone wall jack 2 Parallel splitter 3 DSL/ADSL filter 4 Phone cord provided with the printer connected to the 1-LINE port on the back of the printer You might need to connect the supplied phone cord to the adapter provided for your country/ region. ENWW 5 DSL/ADSL modem 6 Computer Set up faxing (parallel phone systems) 199 7 Answering machine 8 Telephone (optional) NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back. Figure B-14 Example of a parallel splitter To set up the printer with a computer DSL/ADSL modem 1. Obtain a DSL/ADSL filter from your DSL/ADSL provider. NOTE: Phones in other parts of the home/office sharing the same phone number with DSL/ ADSL service need to be connected to additional DSL/ADSL filters, to avoid noise when making voice calls. 2. Using the phone cord supplied in the box with the printer, connect one end to the DSL/ADSL filter, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the DSL/ADSL filter to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 3. Connect the DSL/ADSL filter to the splitter. 4. Unplug the answering machine from the telephone wall jack, and connect it to the port labeled 2EXT on the back of the printer. NOTE: If you do not connect your answering machine directly to the printer, fax tones from a sending fax machine might be recorded on your answering machine, and you might not receive faxes with the printer. 5. Connect the DSL modem to the parallel splitter. 6. Connect the parallel splitter to the wall jack. 7. Set your answering machine to answer after a low number of rings. 8. Change your Rings to Answer setting on the printer to the maximum number of rings supported by the printer. NOTE: The maximum number of rings varies by country/region. 9. Run a fax test. When the phone rings, your answering machine answers after the number of rings you have set, and then play your recorded greeting. The printer monitors the call during this time, “listening” for fax tones. If incoming fax tones are detected, the printer emits fax reception tones and receive the fax; if there are no fax tones, the printer stops monitoring the line and your answering machine can record a voice message. If you use the same phone line for telephone, fax, and have a computer DSL modem, follow these instructions to set up your fax. 200 Appendix B Additional fax setup ENWW If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. Case K: Shared voice/fax line with computer dial-up modem and voice mail If you receive both voice calls and fax calls at the same phone number, use a computer dial-up modem on the same phone line, and subscribe to a voice mail service through your telephone company, set up the printer as described in this section. NOTE: You cannot receive faxes automatically if you have a voice mail service at the same phone number you use for fax calls. You must receive faxes manually; this means you must be available to respond in person to incoming fax calls. If you want to receive faxes automatically instead, contact your telephone company to subscribe to a distinctive ring service, or to obtain a separate phone line for faxing. Since your computer dial-up modem shares the phone line with the printer, you cannot use both your modem and the printer simultaneously. For example, you cannot use the printer for faxing if you are using your computer dial-up modem to send an email or access the Internet. There are two different ways to set up the printer with your computer based on the number of phone ports on your computer. Before you begin, check your computer to see if it has one or two phone ports. ● If your computer has only one phone port, you need to purchase a parallel splitter (also called a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.) Figure B-15 Example of a parallel splitter ● If your computer has two phone ports, set up the printer as follows: Figure B-16 Back view of the printer 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port You might need to connect the supplied phone cord to the adapter provided for your country/region. ENWW 3 Computer with modem 4 Telephone Set up faxing (parallel phone systems) 201 To set up the printer on the same phone line as a computer with two phone ports 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the printer. 3. Connect a phone to the "OUT" port on the back of your computer dial-up modem. 4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 5. If your modem software is set to receive faxes to your computer automatically, turn off that setting. NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer cannot receive faxes. 6. Turn off the Auto Answer setting. 7. Run a fax test. You must be available to respond in person to incoming fax calls, or the printer cannot receive faxes. If you encounter problems setting up the printer with optional equipment, contact your local service provider or vendor for further assistance. 202 Appendix B Additional fax setup ENWW Serial-type fax setup For information on setting up the printer for faxing using a serial-type phone system, see the Fax Configuration web site for your country/region. ENWW Austria www.hp.com/at/faxconfig Germany www.hp.com/de/faxconfig Switzerland (French) www.hp.com/ch/fr/faxconfig Switzerland (German) www.hp.com/ch/de/faxconfig United Kingdom www.hp.com/uk/faxconfig Finland www.hp.fi/faxconfig Denmark www.hp.dk/faxconfig Sweden www.hp.se/faxconfig Norway www.hp.no/faxconfig Netherlands www.hp.nl/faxconfig Belgium (Dutch) www.hp.be/nl/faxconfig Belgium (French) www.hp.be/fr/faxconfig Portugal www.hp.pt/faxconfig Spain www.hp.es/faxconfig France www.hp.com/fr/faxconfig Ireland www.hp.com/ie/faxconfig Italy www.hp.com/it/faxconfig Serial-type fax setup 203 Test fax setup You can test your fax setup to check the status of the printer and to make sure it is set up correctly for faxing. Perform this test after you have completed setting up the printer for faxing. The test does the following: ● Tests the fax hardware ● Verifies the correct type of phone cord is connected to the printer ● Checks that the phone cord is plugged into the correct port ● Checks for a dial tone ● Checks for an active phone line ● Tests the status of your phone line connection The printer prints a report with the results of the test. If the test fails, review the report for information on how to fix the problem and rerun the test. To test fax setup via the printer control panel 1. Set up the printer for faxing according to your particular home or office setup instructions. 2. Make sure the ink cartridges are installed, and that full-size paper is loaded in the input tray before starting the test. 3. From the printer control panel display, touch and slide your finger across the screen and then touch Setup. 4. Touch Tools, and then touch Run Fax Test. The printer displays the status of the test on the display and prints a report. 5. Review the report. ● If the test passes and you are still having problems faxing, check the fax settings listed in the report to verify the settings are correct. A blank or incorrect fax setting can cause problems faxing. ● If the test fails, review the report for more information on how to fix any problems found. 204 Appendix B Additional fax setup ENWW C ENWW Errors (Windows) ● Fax memory full ● Unable to communicate with printer ● Low on ink ● Printhead Problem ● Ink Cartridge Problem ● Replace the ink cartridge ● Incompatible older generation cartridge installed ● Paper Mismatch ● The cartridge cradle cannot move ● Paper Jam ● The printer is out of paper ● Printer Offline ● Printer Paused ● Document failed to print ● Printer failure ● Door or cover open ● Previously used ink cartridge installed ● Ink cartridges depleted ● Ink cartridge failure ● Printer supply upgrade ● Printer supply upgrade successful ● Printer supply upgrade problem ● Non-HP ink cartridges installed ● Using Genuine HP Cartridges has its Rewards ● Counterfeit Cartridge Advisory ● Used, Refilled or Counterfeit Cartridge Detected ● Use SETUP cartridges 205 ● Do not use SETUP cartridges ● Not enough ink at startup ● Use black ink only? ● Use color ink only? ● Incompatible ink cartridges ● Ink sensor failure ● Ink sensor warning ● Problem with printer preparation ● Color cartridge out of ink ● Black cartridge out of ink ● Automatic document feeder cover open ● Problem with ink system 206 Appendix C Errors (Windows) ENWW Fax memory full If Backup Fax Reception or HP Digital Fax is enabled and the printer has a problem (such as a paper jam), the printer saves incoming faxes to memory until the problem is resolved. However, the printer's memory might fill up with faxes that have not been printed yet or transferred to the computer. To solve this problem, resolve any problems with the printer. For more information, see Solve fax problems on page 141. ENWW Fax memory full 207 Unable to communicate with printer The computer cannot communicate with the printer because one of the following events has occurred: ● The printer has been turned off. ● The cable connecting the printer, such as a USB cable or a network (Ethernet) cable, has been disconnected. ● If the printer is connected to a wireless network, the wireless connection has been broken. To solve this problem, try the following solutions: (the Power light) is on. ● Make sure the printer is turned on and that ● Make sure the power cord and other cables are working and are firmly connected to the printer. ● Make sure the power cord is connected firmly to a functioning, alternating current (AC) power outlet. ● If the printer is connected to a network, make sure the network is functioning properly. For more information, see General network troubleshooting on page 150. ● If the printer is connected to a wireless network, make sure the wireless network is functioning properly. For more information, see Unable to connect the printer wirelessly on page 150. 208 Appendix C Errors (Windows) ENWW Low on ink The ink cartridge identified in the message is low on ink. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace cartridges until prompted to do so. For information about replacing ink cartridges, see Replace the ink cartridges on page 99. For information about ordering ink cartridges, see Order ink cartridges on page 101. For information about recycling used ink supplies, see HP inkjet supplies recycling program on page 178. NOTE: Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the printer and cartridges for printing. In addition, some residual ink is left in the cartridge after it is used. For more information see www.hp.com/go/inkusage. ENWW Low on ink 209 Printhead Problem The printhead is missing, not detected, incorrectly installed, or incompatible. If this error occurs at printer setup, try the following solutions: ● Reinstall the printhead. For more information, see Reinstall the printhead on page 157. CAUTION: The printheads contain electrical contacts that can be damaged easily. If this error occurs after the printer has been used for a period of time, try the following solutions: ● Turn the printer off and on. Turn off the printer, and then turn it on again by pressing (the Power button). If the problem persists, contact HP support for service or replacement. For more information, see HP support on page 122. 210 Appendix C Errors (Windows) ENWW Ink Cartridge Problem The ink cartridge identified in the message is missing, damaged, or inserted into the wrong slot in the printer. To solve this problem, try the following solutions. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Solution 1: Turn the printer off and on Turn off the printer, and then turn it on again. If the problem persists, try the next solution. Solution 2: Install the ink cartridges correctly Make sure all of the ink cartridges are properly installed: ENWW 1. Gently pull open the ink cartridge access door. 2. Remove the ink cartridge by pushing it in to release it, and then pulling it firmly toward you. 3. Insert the cartridge into the slot. Press firmly on the cartridge to ensure proper contact. 4. Close the ink cartridge access door and check if the error message has gone away. Ink Cartridge Problem 211 Replace the ink cartridge Replace the indicated ink cartridge. For more information, see Replace the ink cartridges on page 99. NOTE: If your cartridge is still under warranty, contact HP support for service or replacement. For more information about ink cartridge warranty, see Ink cartridge warranty information on page 164. If the problem persists after you replace the cartridge, contact HP support. For more information, see HP support on page 122. 212 Appendix C Errors (Windows) ENWW Incompatible older generation cartridge installed You will need to use a newer version of this cartridge. In most cases you can identify a newer version of the cartridge by looking at the exterior of the cartridge package. Find the Warranty Ends date. If it says ‘v1’ several spaces to the right of the date, then the cartridge is the updated newer version. Click here to go online for more information . ENWW Incompatible older generation cartridge installed 213 Paper Mismatch The paper size or type selected in the printer driver does not match the paper loaded in the printer. Make sure that the correct paper is loaded in the printer, and then print the document again. For more information, see Load paper on page 23. NOTE: If the paper loaded in the printer is the correct size, change the selected paper size in the printer driver, and then print the document again. 214 Appendix C Errors (Windows) ENWW The cartridge cradle cannot move Something is blocking the ink cartridge cradle (the part of the printer that holds the ink cartridges). To clear the obstruction, press for jams. (the Power button) to turn off the printer, and then check the printer For more information, see Clear jams on page 159. ENWW The cartridge cradle cannot move 215 Paper Jam Paper has become jammed in the printer. Before you try to clear the jam, check the following: ● Make sure that you have loaded paper that meets specifications and is not wrinkled, folded, or damaged. For more information, see Paper size and weights on page 166. ● Make sure that the printer is clean. For more information, see Maintain the printer on page 34. ● Make sure that the trays are loaded correctly and are not too full. For more information, see Load paper on page 23. For instructions on clearing jams, as well as more information about how to avoid jams, see Clear jams on page 159. 216 Appendix C Errors (Windows) ENWW The printer is out of paper The default tray is empty. Load more paper, and then touch OK. For more information, see Load paper on page 23. ENWW The printer is out of paper 217 Printer Offline The printer is currently offline. While offline, the printer cannot be used. To change the printer's status, complete the following steps. 1. Depending on your operating system, do one the following: ● Windows 8: On the Start screen, click Control Panel, and then click View devices and printers. ● Windows 7, Windows Vista, or Windows XP: Click Start, and then click Devices and Printers, Printers, or Printers and Faxes. 2. If the printers listed in the dialog box are not being displayed in Details view, click the View menu, and then click Details. 3. If the printer is Offline, right-click the printer, and click Use Printer Online. 4. Try using the printer again. 218 Appendix C Errors (Windows) ENWW Printer Paused The printer is currently paused. While paused, new jobs are added to the queue but are not printed. To change the printer's status, depending on your operating system, do one of the following: To change the printer's status, do one of the following: 1. ENWW Depending on your operating system, do one the following: ● Windows 8: On the Start screen, click Control Panel, and then click View devices and printers. ● Windows 7, Windows Vista, or Windows XP: Click Start, and then click Devices and Printers, Printers, or Printers and Faxes. 2. If the printers listed in the dialog box are not being displayed in Details view, click the View menu, and then click Details. 3. If the printer is paused, right-click the printer, and click Resume Printing. 4. Try using the printer again. Printer Paused 219 Document failed to print The printer could not print the document because a problem occurred in the printing system. For information about solving printing problems, see Solve printer problems on page 129. 220 Appendix C Errors (Windows) ENWW Printer failure There was a problem with the printer. Usually, you can resolve such problems by completing the following steps: (the Power button) to turn off the printer. 1. Press 2. Unplug the power cord, and then plug in the power cord again. 3. Press (the Power button) to turn on the printer. If this problem persists, write down the error code provided in the message, and then contact HP support. For more information about contacting HP support, see HP support on page 122. ENWW Printer failure 221 Door or cover open Before the printer can print documents, all doors and covers must be closed. TIP: When completely closed, most doors and covers snap into place. If the problem persists after you’ve securely closed all doors and covers, contact HP support. For more information, see HP support on page 122. 222 Appendix C Errors (Windows) ENWW Previously used ink cartridge installed The ink cartridge identified in the message was previously used in a different printer. You can use ink cartridges in different printers, but if the cartridge was left outside of a printer for an extended period of time, the print quality of your documents might be affected. Also, if you use ink cartridges that have been used in a different printer, the ink level indicator might be inaccurate or unavailable. If the print quality is unsatisfactory, try cleaning the printheads. NOTE: Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the printer and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information, see www.hp.com/go/ inkusage. For more information about storing ink cartridges, see Order ink cartridges on page 101. ENWW Previously used ink cartridge installed 223 Ink cartridges depleted The cartridges listed in the message must be replaced to resume printing. HP recommends that you do not remove an ink cartridge until a replacement is ready to install. For more information, see Replace the ink cartridges on page 99. 224 Appendix C Errors (Windows) ENWW Ink cartridge failure The cartridges listed in the message are damaged or have failed. See Replace the ink cartridges on page 99. ENWW Ink cartridge failure 225 Printer supply upgrade The cartridge listed in the message can only be used to upgrade one printer. Click OK to use it on this printer. If you do not wish to proceed with the supply upgrade for this printer, click Cancel Print and then remove the cartridge. 226 Appendix C Errors (Windows) ENWW Printer supply upgrade successful The supply upgrade was successful. The cartridges listed in the message can now be used in the printer. ENWW Printer supply upgrade successful 227 Printer supply upgrade problem The supply upgrade was not successful. The cartridges listed in the message can still be used in this printer. Replace the Supply Upgrade cartridge. For more information, see Replace the ink cartridges on page 99. 228 Appendix C Errors (Windows) ENWW Non-HP ink cartridges installed HP cannot guarantee the quality or reliability of non-HP supplies. Printer service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased Genuine HP ink cartridges, visit HP at www.hp.com/go/anticounterfeit for more information or to report fraud. ENWW Non-HP ink cartridges installed 229 Using Genuine HP Cartridges has its Rewards HP rewards loyal customers for using genuine HP supplies. Click the button below the message to view Rewards online. Reward may not be available in all regions. 230 Appendix C Errors (Windows) ENWW Counterfeit Cartridge Advisory The installed cartridge is not a new, genuine HP cartridge. Contact the store where this cartridge was purchased. To report suspected fraud, visit HP at www.hp.com/go/anticounterfeit. To continue using the cartridge, click Continue. ENWW Counterfeit Cartridge Advisory 231 Used, Refilled or Counterfeit Cartridge Detected The original HP ink in the cartridge has been depleted. The solution for this problem is to replace the ink cartridge or click OK to continue using the cartridge. For more information about replacing the cartridge, see Replace the ink cartridges on page 99. HP rewards loyal customers for using genuine HP supplies. Click the button below the message to view Rewards online. Rewards may not be available in all regions. WARNING! HP's ink cartridge warranty does not cover non-HP ink or cartridges. HP's printer warranty does not cover repairs or service due to use of non-HP cartridges or ink. HP does not guarantee the quality or reliability of non-HP ink. Information about ink levels will not be available. 232 Appendix C Errors (Windows) ENWW Use SETUP cartridges When you first setup the printer, you must install the cartridges that shipped in the box with the printer. These cartridges are labeled SETUP, and they calibrate your printer before the first print job. Failure to install the SETUP cartridges during the initial product setup causes an error. If you installed a set of regular cartridges, remove them and install the SETUP cartridges to complete printer setup. After printer setup is complete, the printer can use regular cartridges. if you still receive error messages and the printer cannot complete ink system initialization, contact HP support. For more information, see HP support on page 122. Click here to go online for more information . ENWW Use SETUP cartridges 233 Do not use SETUP cartridges SETUP cartridges cannot be used after the printer has been initialized. Remove and install nonSETUP cartridges. For more information, see Replace the ink cartridges on page 99. 234 Appendix C Errors (Windows) ENWW Not enough ink at startup The used cartridges listed in the message might not have enough ink to complete one-time startup processes. Solution: Install new cartridges or click OK to use installed cartridges. If startup cannot complete with installed cartridges, new cartridges will be needed. For information on how to install new cartridges, see Replace the ink cartridges on page 99. ENWW Not enough ink at startup 235 Use black ink only? The cartridges listed in the message are out of ink. Solutions: To print in color, replace the empty cartridges. For information about how to install new cartridges, see Replace the ink cartridges on page 99. To temporarily print using Black ink only, click Use Black Only. The printer will replace color with grayscale. The empty cartridges will need to be replaced soon. CAUTION: Do NOT remove the empty color cartridge to print in Use Black Only mode. 236 Appendix C Errors (Windows) ENWW Use color ink only? The black cartridge is out of ink. Solutions: To temporarily replace black with color, click Use Color Only. Black will be simulated. Text and photo quality will differ from those printed when using all cartridges. The black cartridge will need to be replaced soon. To print with black, replace the black ink cartridge. For information about how to install new cartridges, see Replace the ink cartridges on page 99. CAUTION: ENWW Do NOT remove the empty black cartridge to print in Use Color Only mode. Use color ink only? 237 Incompatible ink cartridges The ink cartridge is not compatible with your printer. This error can occur if you install an HP Instant Ink cartridge into a printer that has not been enrolled in the HP Instant Ink program. It can also occur if the HP Instant Ink cartridge was previously used in a different printer enrolled in the HP Instant Ink program. Visit the HP Instant Ink program website for more information. 238 Appendix C Errors (Windows) ENWW Ink sensor failure The ink sensor has failed and the printer can no longer print. Contact HP support. For more information, see www.hp.com/support. ENWW Ink sensor failure 239 Ink sensor warning The ink sensor is reporting an unexpected condition. This could be caused by the cartridge, or the sensor may have failed. If the sensor has failed, it can no longer sense when your cartridges are out of ink. Printing with an empty cartridge will cause air to enter the ink system, which causes poor print quality. Significant amounts of ink will be used up to recover from this condition, which will deplete much of the ink supply for all cartridges. Solution: Click OK to continue printing or replace the cartridge. For information about how to install new cartridges, see Replace the ink cartridges on page 99. 240 Appendix C Errors (Windows) ENWW Problem with printer preparation The printer clock has failed and ink preparation may not be complete. The estimated Ink Level gauge might be inaccurate. Solution: Check the print quality of your print job. If it is not satisfactory, running the printhead cleaning procedure from the toolbox might improve it. ENWW Problem with printer preparation 241 Color cartridge out of ink The cartridges listed in the message are out of ink. Solutions: To print in color, replace the empty cartridges. For information about how to install new cartridges, see Replace the ink cartridges on page 99. To temporarily print using black ink only, click Cancel Print and then re-send the print job. The Use black ink only? message appears before the job prints. The empty cartridges will need to be replaced soon. CAUTION: Do NOT remove the empty color cartridge to print in Use Black Only mode. 242 Appendix C Errors (Windows) ENWW Black cartridge out of ink The black cartridge is out of ink. Solutions: Replace the black ink cartridge. For information about how to install new cartridges, see Replace the ink cartridges on page 99. CAUTION: Do NOT remove the empty black cartridge to print in Use Color Only mode. To temporarily replace black with color, click Cancel Print and re-send the print job. The Use color ink only? message appears before the job prints. The black cartridge will need to be replaced soon. ENWW Black cartridge out of ink 243 Automatic document feeder cover open Close the cover of the Automatic Document Feeder to continue. 244 Appendix C Errors (Windows) ENWW Problem with ink system Please remove the ink cartridges and examine them for any sign of leaks. If any cartridges have leaks, contact HP support. Do not use cartridges that are leaking. If there are no leaks, re-install cartridges and close the printer cover. Turn the printer off then on again. If you get this message a second time, contact HP support. For more information about contacting HP support, see HP support on page 122. ENWW Problem with ink system 245 246 Appendix C Errors (Windows) ENWW Index A accessibility 4 accessories printer status report 125 setup 30 acoustic emissions 167 ADSL, fax setup with parallel phone systems 185 after the support period 123 align printhead 156 answer ring pattern change 78 parallel phone systems 187 answering machine set up with fax (parallel phone systems) 196 set up with fax and modem 197 automatic document feeder (ADF) clean 35 feeding problems, troubleshoot 35 automatic fax reduction 70 B backup fax 68 baud rate 79 black and white pages fax 61 blank pages, troubleshoot copy 135 blocked fax numbers set up 70 broadcast faxing send 65 buttons, control panel 9 C calibrate linefeed 157 carriage clear carriage jams 162 cartridges 101 ENWW clean automatic document feeder 35 exterior 34 printhead 155 scanner glass 34 clear fax logs 84 colored text, and OCR 58 computer modem shared with fax (parallel phone systems) 190 shared with fax and answering machine (parallel phone systems) 197 shared with fax and voice line (parallel phone systems) 193 shared with fax and voice mail (parallel phone systems) 201 confirmation reports, fax 83 connectors, locating 8 control panel buttons 9 lights 9 status icons 9 Copy 10 copy quality 135 specifications 166 troubleshoot 135 correct port test, fax 142 customer support electronic 122 D dial tone test, failure 144 dial type, setting 79 dial-up modem shared with fax (parallel phone systems) 190 shared with fax and answering machine (parallel phone systems) 197 shared with fax and voice line (parallel phone systems) 193 shared with fax and voice mail (parallel phone systems) 201 distinctive ringing change 78 parallel phone systems 187 document feeder load originals 28 DSL, fax setup with parallel phone systems 185 duplexer clear jams 159 installation 30 E ECM. See error correction mode edit text in OCR program 58 embedded web server about 118 opening 118 troubleshoot, cannot be opened 153 Webscan 57 environmental specifications 165 environmental sustainability program 177 error correction mode 66 error reports, fax 84 EWS. See embedded web server F fax answer mode 77 answering machine and modem, shared with (parallel phone systems) 197 Index 247 answering machine, set up (parallel phone systems) 196 auto answer 77 backup fax 68 blocking numbers 70 confirmation reports 83 dial tone test, failed 144 dial type, setting 79 distinctive ringing setup (parallel phone systems) 187 distinctive ringing, change pattern 78 DSL, set up (parallel phone systems) 185 error correction mode 66 error reports 84 forwarding 69 header 77 Internet Protocol, over 82 ISDN line, set up (parallel phone systems) 186 line condition test, failed 144 log, clear 84 log, print 84 manual receive 67 modem and answering machine, shared with (parallel phone systems) 197 modem and voice line, shared with (parallel phone systems) 193 modem and voice mail, shared with (parallel phone systems) 201 modem, shared with (parallel phone systems) 190 monitor dialing 64, 65 paper size 69 parallel phone systems 182 PBX system, set up (parallel phone systems) 186 phone cord connection test, failed 142 phone cord type test, failed 143 print last transaction details 85 receive 67 receive, troubleshoot 145, 147 redial options 79 reduction 70 248 Index reports 83 reprint 68 rings to answer 78 send 62 send, troubleshoot 145, 148 separate line setup (parallel phone systems) 184 settings, change 77 setup types 183 shared phone line setup (parallel phone systems) 188 sound volume 80 specifications 167 speed 79 test failed 141 test setup 204 troubleshoot 141 voice mail, set up (parallel phone systems) 189 wall jack test, failed 142 Fax screen 10 firewalls, troubleshoot 131 FoIP 82 forwarding faxes 69 G glass, scanner clean 34 load originals 27 locating 7 grainy or white bands on copies, troubleshoot 136 H hardware, fax setup test 141 head 155 header, fax 77 Help 10 HP Utility (OS X) opening 117 humidity specifications 165 I ink cartridges 8 check ink levels 97 locating 8 part numbers 101, 126 replace 99 status 126 tips 96 warranty expiration dates 126 ink level icons 10 ink levels, check 97 ink-cartridge access door, locating 8 installation duplexer 30 Internet Protocol fax, using 82 IP address checking for printer 153 IP settings 109 ISDN line, set up with fax parallel phone systems 186 J jams clear 159 paper 161 paper to avoid 22 junk fax mode 70 L lights, control panel 9 line condition test, fax 144 linefeed, calibrate 157 lines copies, troubleshoot 135 scans, troubleshoot 139 link speed, setting 109 log, fax print 84 M maintain printhead 155 maintenance align printhead 156 calibrate linefeed 157 check ink levels 97 clean printhead 155 printhead 155 reinstall the printhead 157 replace ink cartridges 99 manual faxing receive 67 send 63, 64 memory reprint faxes 68 save faxes 68 missing or incorrect information, troubleshoot 131 model number 125 modem shared with fax (parallel phone systems) 190 ENWW shared with fax and answering machine (parallel phone systems) 197 shared with fax and voice line (parallel phone systems) 193 shared with fax and voice mail (parallel phone systems) 201 monitor dialing 64, 65 multi-feeds, troubleshoot 130 N networks connector illustration 8 firewalls, troubleshoot 131 IP settings 109 link speed 109 settings, change 109 solve problems 150 view and print settings 109 wireless communication setup 106 wireless settings 126 noise information 167 O OCR edit scanned documents 58 troubleshoot 138 operating systems supported 165 originals scan 56 OS X HP Utility 117 output tray locating 7 P paper clear jams 159 HP, order 21 jams 161 load tray 23 selecting 22 size, set for fax 69 skewed pages 130 specifications 166 troubleshoot feeding 129 paper-feed problems, troubleshoot 129 parallel phone systems answering machine setup 196 countries/regions with 182 ENWW distinctive ringing setup 187 DSL setup 185 ISDN setup 186 modem and answering machine setup 197 modem and voice mail setup 201 modem setup 190 modem shared with voice line setup 193 PBX setup 186 separate line setup 184 setup types 183 shared line setup 188 PBX system, set up with fax parallel phone systems 186 phone cord connected to correct port test failed 142 correct type test failed 143 phone line, answer ring pattern 78 phone support 123 phone support period period for support 123 phone, fax from receive 67 send, 63 photos insert USB flash drive 29 power troubleshoot 129 power input, locating 8 print fax logs 84 fax reports 83 faxes 68 last fax details 85 printer status report 125 troubleshoot 129 print settings print quality 132 print-carriage access door, locating 8 printer control panel locating 7 network settings 109 scan from 56 send faxes 62 printer software (Windows) about 116 opening 37, 116 printer status report information on 125 print 125 printhead 157 clean 155 printhead, align 156 pulse dialing 79 Q quality, troubleshoot copy 135 scan 139 R radio interference regulatory information 174 rear access panel clear jams 159 illustration 8 receive faxes auto answer mode 77 automatically 67 blocking numbers 70 forwarding 69 manually 67 rings to answer 78 troubleshoot 145, 147 recycle ink cartridges 178 redial options, setting 79 reduce fax 70 regulatory information 169, 174 regulatory model number 169 Reinstall the printhead 157 replace ink cartridges 99 reports confirmation, fax 83 error, fax 84 fax test failed 141 printhead 155 reprint faxes from memory 68 rings to answer 78 S save faxes in memory 68 scan from printer control panel from Webscan 57 OCR 58 quality 139 Scan screen 10 scan specifications 166 56 Index 249 slow 137 troubleshoot 137 Scan screen 10 scanner glass clean 34 load originals 27 locating 7 second tray use Tray 2 31 send faxes basic fax 62 manually 63 memory, from 65 monitor dialing 64, 65 troubleshoot 145, 148 send scans for OCR 58 troubleshoot 137 serial number 125 serial phone systems countries/regions with 182 setup types 183 settings network 109 speed, fax 79 volume, fax 80 Setup 10 setup accessories 30 answering machine (parallel phone systems) 196 answering machine and modem (parallel phone systems) 197 computer modem (parallel phone systems) 190 computer modem and answering machine (parallel phone systems) 197 computer modem and voice line (parallel phone systems) 193 computer modem and voice mail (parallel phone systems) 201 distinctive ringing 78 distinctive ringing (parallel phone systems) 187 DSL (parallel phone systems) 185 fax scenarios 183 fax, with parallel phone systems 182 250 Index ISDN line (parallel phone systems) 186 PBX system (parallel phone systems) 186 separate fax line (parallel phone systems) 184 shared phone line (parallel phone systems) 188 test fax 204 voice mail (parallel phone systems) 189 voice mail and computer modem (parallel phone systems) 201 size scans, troubleshoot 139 troubleshoot copy 135 skew, troubleshoot copy 135 print 130 scan 139 software OCR 58 Webscan 57 sound pressure 167 specifications acoustic emissions 167 paper 166 physical 165 system requirements 165 speed troubleshoot for scanner 137 speed dial send fax 62 status network configuration page 126 printer status report 125 status icons 9 stripes on scans, troubleshoot 139 subscriber identification code 77 supplies printer status report 125 support 122 support process 122 system requirements 165 T technical information copy specifications 166 fax specifications 167 scan specifications 166 telephone line, answer ring pattern 78 telephone wall jack, fax 142 telephone, fax from receive 67 send 63 temperature specifications 165 tests, fax dial tone, failed 144 failed 141 fax line condition 144 fax phone cord type test failed 143 hardware, failed 141 port connection, failed 142 setup 204 telephone wall jack 142 text cannot be edited after scan, troubleshoot 138 missing from scan, troubleshoot 137 tone dialing 79 trays clear jams 159 load paper 23 locating 7 paper-width guides illustration 7 troubleshoot feeding 129 troubleshoot control panel help system 124 copy 135 copy quality 135 embedded web server 153 fax 141 fax dial tone test failed 144 fax hardware test failed 141 fax line test failed 144 fax phone cord connection test failed 142 fax phone cord type test failed 143 fax tests 141 fax wall jack test, failed 142 firewalls 131 jams, paper 161 missing or incorrect information 131 multiple pages are picked 130 network configuration page 126 nothing prints 131 ENWW paper not picked up from tray 129 paper-feed problems 129 power 129 print 129 printer status report 125 printing problem 131 receive faxes 145, 147 scan 137 scan quality 139 send faxes 145, 148 skewed copies 135 skewed pages 130 troubleshooting solve network problems 150 U USB connection port, locating 7, 8 USB flash drive insert 29 V view network settings 109 voice mail set up with fax (parallel phone systems) 189 set up with fax and computer modem (parallel phone systems) 201 volume fax sounds 80 W wall jack test, fax 142 web sites customer support 122 environmental programs 177 Webscan 57 websites accessibility information 4 white bands or stripes, troubleshoot copies 136 scans 139 Windows system requirements 165 wireless communication regulatory information 174 set up 106 wireless connection icons 9 ENWW Index 251
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : HP IWS Design Customer Education Create Date : 2014:04:22 16:09:18+08:00 Keywords : Edition 1, 4/2014 Modify Date : 2014:04:23 11:11:44+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : AH Formatter V5.1 R1 (5,1,2009,0914) for Windows Metadata Date : 2014:04:23 11:11:44+08:00 Format : application/pdf Description : EN Creator : HP IWS Design Customer Education Title : HP Officejet 8610 User Guide – ENWW Subject : Edition 1, 4/2014 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:1440dbff-847a-4acd-8788-257ad32d5125 Instance ID : uuid:f7608455-efac-41f9-a229-2a65dbec4cff Page Layout : SinglePage Page Mode : UseOutlines Page Count : 268EXIF Metadata provided by EXIF.tools