Hp Photosmart C7250 All In One Printer Users Manual C7200 Series

Hp-Photosmart-C7200-Users-Manual-545288 hp-photosmart-c7200-users-manual-545288

If not then c01102249 Manual: ://h10032.www1.hp.com/ctg/Manual/c01102249

C7200 to the manual 3caf64e4-1832-4760-89e5-d1d80f0026e0

2015-01-05

: Hp Hp-Photosmart-C7250-All-In-One-Printer-Users-Manual-140877 hp-photosmart-c7250-all-in-one-printer-users-manual-140877 hp pdf

Open the PDF directly: View PDF .
Page Count: 309

Download
Open PDF In Browser	View PDF

HP Photosmart C7200 All-in-One series

Windows Help

HP Photosmart C7200 All-in-One series Help........................................................................9

HP All-in-One overview
The HP All-in-One at a glance..................................................................................................11
Control panel overview.............................................................................................................12
Control panel features........................................................................................................13
Display icons.......................................................................................................................14
Display sleep state.............................................................................................................15
Menu overview..........................................................................................................................15
Photosmart Express Menu.................................................................................................16
Copy Menu.........................................................................................................................16
Scan Menu..........................................................................................................................17
Fax Menu............................................................................................................................17
Setup Menu........................................................................................................................17
Help Menu..........................................................................................................................18
Text and symbols......................................................................................................................18
Enter text using the keypad on the control panel...............................................................18
Enter text using the visual keyboard...................................................................................19
Available symbols for dialing fax numbers.........................................................................20
Use the HP Photosmart Software.............................................................................................21

Find more information............................................................................................................23

Finish setting up the HP All-in-One
Set your preferences................................................................................................................25
General preferences...........................................................................................................25
Set your language and country/region..........................................................................25
Set the date and time...................................................................................................26
Adjust the volume.........................................................................................................26
Set the default paper tray for PictBridge/DPOF/uPnP printing.....................................27
Enable faster browsing of photos.................................................................................27
Set the paper tray for printing from a Bluetooth device................................................27
Restore the factory defaults..........................................................................................28
Play a slideshow on the display....................................................................................28
Fax preferences..................................................................................................................29
Set up the HP All-in-One to redial a fax number automatically....................................29
Set tone or pulse dialing...............................................................................................29
Set the fax speed..........................................................................................................30

Contents

Computer connection information.............................................................................................30
Supported connection types...............................................................................................31
Connect using Ethernet......................................................................................................31
Connect using integrated wireless WLAN 802.11..............................................................32
Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless
Technology.........................................................................................................................32
Find the device name and address..............................................................................32
Set Bluetooth security for the HP All-in-One................................................................33
Use a Bluetooth® connection to print from your computer............................................34
Use printer sharing.............................................................................................................36
Connect to a network................................................................................................................36
Wired network setup...........................................................................................................37
What you need for a wired network..............................................................................38
Connect the HP All-in-One to the network....................................................................38
Integrated wireless WLAN 802.11 network setup...............................................................39
What you need for an integrated wireless WLAN 802.11 network...............................40
Connect to an integrated wireless WLAN 802.11 network...........................................40
Wireless ad hoc network setup...........................................................................................43
What you need for an ad hoc network..........................................................................43
Create a network profile for a Windows XP computer..................................................43
Create a network profile for other operating systems...................................................45
Connect to a wireless ad hoc network..........................................................................45
Install the software for a network connection.....................................................................46
Connect to additional computers on a network..................................................................47
Change the HP All-in-One from a USB connection to a network connection.....................47
Manage your network settings............................................................................................48
Change basic network settings from the control panel.................................................48
Change advanced network settings from the control panel settings............................50
Use the Embedded Web Server...................................................................................52
Network configuration page definitions.........................................................................53
Network glossary................................................................................................................59
Fax setup..................................................................................................................................61
Change settings on the HP All-in-One to receive faxes.....................................................62
Set the answer mode....................................................................................................62
Set the number of rings before answering....................................................................62
Change the answer ring pattern for distinctive ringing.................................................63
Test your fax setup.............................................................................................................63
Set the fax header..............................................................................................................64
Set up speed dialing...........................................................................................................65
Set up individual speed dial entries..............................................................................65
Set up group speed dial entries....................................................................................66
Delete speed dial entries..............................................................................................67
Print the speed dial list.................................................................................................67
5

How do I?.................................................................................................................................69

Load originals and load paper
Load originals...........................................................................................................................71
Load an original in the automatic document feeder............................................................71
Load an original on the glass..............................................................................................72

Choose papers for printing and copying...................................................................................73
Recommended papers for printing and copying.................................................................73
Recommended papers for printing only..............................................................................74
Papers to avoid...................................................................................................................75
Load paper...............................................................................................................................76
Load full-size paper............................................................................................................76
Load 10 x 15 cm (4 x 6 inch) photo paper..........................................................................78
Load postcards, Hagaki, or index cards.............................................................................79
Load envelopes..................................................................................................................80
Load other types of paper...................................................................................................81
Avoid paper jams......................................................................................................................82
7

Print from your computer
Print from a software application..............................................................................................83
Make the HP All-in-One the default printer...............................................................................84
Change the print settings for the current job............................................................................84
Set the paper size...............................................................................................................84
Set the paper type for printing............................................................................................85
View the print resolution.....................................................................................................85
Change the print speed or quality.......................................................................................86
Change the page orientation..............................................................................................86
Scale the document size....................................................................................................87
Change the saturation, brightness, or color tone................................................................87
Preview your print job.........................................................................................................87
Change the default print settings..............................................................................................88
Printing shortcuts......................................................................................................................88
Create printing shortcuts....................................................................................................89
Delete printing shortcuts.....................................................................................................89
Perform special print jobs.........................................................................................................90
Print a borderless image.....................................................................................................90
Print a photo on photo paper..............................................................................................91
Print custom CD/DVD labels ..............................................................................................92
Print using Maximum dpi...................................................................................................92
Print on both sides of the page...........................................................................................93
Print a multiple-page document as a booklet.....................................................................93
Print multiple pages on a single sheet................................................................................95
Print a multiple-page document in reverse order................................................................95
Reverse an image for iron-on transfers..............................................................................96
Print on transparencies.......................................................................................................96
Print a group of addresses on labels or envelopes............................................................97
Print a poster......................................................................................................................98
Print a Web page................................................................................................................98
Stop a print job.........................................................................................................................99

Use the photo features
View and select photos...........................................................................................................102
Print your photos....................................................................................................................104
Create special projects from your photos...............................................................................105
Share photos using HP Photosmart Software........................................................................107
Save photos to your computer................................................................................................108

Contents

Edit photos using the control panel........................................................................................109
Zoom and pan to crop a photo.........................................................................................109
Rotate a photo..................................................................................................................110
Adjust the brightness of your photos................................................................................110
Apply special color effects to your photos........................................................................111
Remove red-eye...............................................................................................................112
Automatically enhance your photos..................................................................................112
9
Contents

Use the scan features
Make reprints of your photos..................................................................................................115
Scan an image........................................................................................................................116
Scan an original to a computer.........................................................................................117
Scan an original to a memory card or storage device......................................................117
Edit a scanned image.............................................................................................................118
Edit a scanned preview image..........................................................................................118
Edit a scanned photo or graphic.......................................................................................118
Edit a scanned document.................................................................................................118
Share a scanned image with friends and relatives.................................................................119
Stop scanning.........................................................................................................................119

10 Use the copy features
Make a copy...........................................................................................................................121
Preview your copy job............................................................................................................121
Change the copy settings for the current job..........................................................................122
Set the number of copies..................................................................................................122
Set the copy paper size....................................................................................................122
Set the copy paper type....................................................................................................123
Change copy speed or quality..........................................................................................124
Adjust the lightness and darkness of your copy...............................................................125
Change default copy settings.................................................................................................125
Perform special copy jobs......................................................................................................126
Make a borderless copy of a photo..................................................................................126
Resize an original to fit onto letter or A4 paper................................................................127
Resize an original using custom settings.........................................................................127
Crop an original................................................................................................................128
Shift the left margin...........................................................................................................128
Improve the quality of a copy............................................................................................129
Stop copying...........................................................................................................................129

11 Use the fax features
Send a fax..............................................................................................................................131
Send a basic fax...............................................................................................................131
Send a fax using speed dials............................................................................................132
Send a fax manually from a phone...................................................................................133
Send a fax using monitor dialing......................................................................................134
Scan a fax to send from memory......................................................................................135
Schedule a fax to send later.............................................................................................135
Broadcast a fax to multiple recipients ..............................................................................136
Send a color original or photo fax.....................................................................................136
Change the fax resolution and Lighter/Darker settings...................................................137
Change the fax resolution...........................................................................................137
Change the Lighter/Darker setting............................................................................138
Set new default settings.............................................................................................139
Send a fax in Error Correction Mode................................................................................139
Receive a fax..........................................................................................................................140
Receive a fax manually....................................................................................................140
Set up backup fax reception.............................................................................................141
Reprint received faxes from memory................................................................................142
Poll to receive a fax..........................................................................................................143
Forward faxes to another number....................................................................................143
Set the paper size for received faxes...............................................................................144
Set up the HP All-in-One to check the paper type before printing faxes..........................144
Set automatic reduction for incoming faxes......................................................................145
Block junk fax numbers....................................................................................................145
Set the junk fax mode.................................................................................................146
Add numbers to the junk fax list.................................................................................146
Remove numbers from the junk fax list......................................................................147
Fax over the Internet using IP phone.....................................................................................147
Stop faxing..............................................................................................................................148
12 Print reports and forms
Print reports............................................................................................................................149
Print a self-test report.......................................................................................................149
Print fax reports................................................................................................................150
Print fax confirmation reports......................................................................................150
Print fax error reports..................................................................................................151
Print the fax log...........................................................................................................151
Print other reports.......................................................................................................152
Print forms..............................................................................................................................153
13 Maintain the HP All-in-One
Clean the HP All-in-One.........................................................................................................155
Clean the glass.................................................................................................................155
Clean the lid backing........................................................................................................157
Clean the exterior.............................................................................................................157
Check the estimated ink levels...............................................................................................157

Contents

Work with ink cartridges..........................................................................................................158
Replace the ink cartridges................................................................................................159
Align the printer................................................................................................................161
Clean the print head.........................................................................................................162
Clean the ink cartridge contacts.......................................................................................163
Remove ink from your skin and clothing...........................................................................164
Self-maintenance sounds.......................................................................................................165
Reduce energy consumption when the HP All-in-One is off...................................................165
Turn off the HP All-in-One......................................................................................................165
Contents

14 Shop for ink supplies...........................................................................................................167
15 Troubleshooting
Troubleshooting tips...............................................................................................................169
Communication problems over a USB connection...........................................................169
Information on ink cartridges and the print head..............................................................170
Information on paper........................................................................................................171
Tips for using the automatic document feeder.................................................................171
Clear paper jams..............................................................................................................171
Clean the automatic document feeder..............................................................................173
Hardware setup troubleshooting.............................................................................................174
Software installation troubleshooting......................................................................................179
Uninstall and reinstall the software...................................................................................181
Network troubleshooting.........................................................................................................183
Wired network setup troubleshooting...............................................................................183
Wireless setup troubleshooting........................................................................................186
Print quality troubleshooting...................................................................................................189
Print troubleshooting...............................................................................................................200
Memory card and front USB port troubleshooting..................................................................208
Scan troubleshooting..............................................................................................................212
Copy troubleshooting..............................................................................................................215
Fax troubleshooting................................................................................................................219
Errors......................................................................................................................................258
Device messages.............................................................................................................258
File messages...................................................................................................................261
Supported file types for the HP All-in-One..................................................................263
General user messages...................................................................................................263
Paper messages...............................................................................................................267
Power and connection messages.....................................................................................269
Ink cartridge messages....................................................................................................271
16 HP warranty and support
Warranty.................................................................................................................................279
Ink cartridge warranty information..........................................................................................279
Support process.....................................................................................................................280
Before you call HP support.....................................................................................................280
HP support by phone..............................................................................................................281
Phone support period.......................................................................................................281
Placing a call....................................................................................................................281
After the phone support period.........................................................................................281
Additional warranty options....................................................................................................281

Contents

17 Technical information
Specifications.........................................................................................................................287
Duplexer paper specifications..........................................................................................289
Environmental product stewardship program.........................................................................289
Paper use.........................................................................................................................290
Plastics.............................................................................................................................290
Material safety data sheets...............................................................................................290
Recycling program............................................................................................................290
HP inkjet supplies recycling program...............................................................................290
Energy consumption.........................................................................................................290
Special handling of materials............................................................................................290
Attention California users.................................................................................................290
NDL battery disposal........................................................................................................290
Taiwan battery statement.................................................................................................291
Disposal of Waste Equipment by Users in Private Households in the European
Union................................................................................................................................291
Regulatory notices..................................................................................................................292
Regulatory model identification number...........................................................................292
FCC statement..................................................................................................................293
Notice to users of the U.S. telephone network: FCC requirements..................................293
Note à l’attention des utilisateurs du réseau téléphonique canadien/notice to users of
the Canadian telephone network......................................................................................294
Notice to users in the European Economic Area..............................................................296
Notice to users of the German telephone network...........................................................296
Australia wired fax statement...........................................................................................296
Notice to users in Korea...................................................................................................296
VCCI (Class B) compliance statement for users in Japan................................................297
Notice to users in Japan about power cord......................................................................297
Geräuschemission............................................................................................................297
Regulatory wireless statements..............................................................................................297
Wireless: Exposure to radio frequency radiation..............................................................297
Wireless: Notice to users in Brazil....................................................................................297
Wireless: Notice to users in Canada................................................................................298
European Union Regulatory Notice..................................................................................298
Wireless: Notice to users in Taiwan.................................................................................299
Declaration of conformity (European Economic Area)...........................................................299
HP Photosmart C7200 All-in-One series declaration of conformity........................................300
Index............................................................................................................................................301

Contents

HP Quick Exchange Service (Japan).....................................................................................282
Call HP Korea customer support............................................................................................282
Prepare the HP All-in-One for shipment.................................................................................283
Secure the ink system......................................................................................................283
Remove the control panel faceplate.................................................................................283
Pack the HP All-in-One...........................................................................................................284

Contents

HP Photosmart C7200 All-inOne series Help
For information about the HP All-in-One, see:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

“HP All-in-One overview” on page 11
“Find more information” on page 23
“Finish setting up the HP All-in-One” on page 25
“How do I?” on page 69
“Load originals and load paper” on page 71
“Print from your computer” on page 83
“Use the photo features” on page 101
“Use the scan features” on page 115
“Use the copy features” on page 121
“Use the fax features” on page 131
“Print reports and forms” on page 149
“Maintain the HP All-in-One” on page 155
“Shop for ink supplies” on page 167
“HP warranty and support” on page 279
“Technical information” on page 287

HP Photosmart C7200 All-in-One series Help

HP Photosmart C7200 All-inOne series Help

Chapter 1

HP Photosmart C7200 All-inOne series Help
10

HP Photosmart C7200 All-in-One series Help

HP All-in-One overview
Use the HP All-in-One to quickly and easily accomplish tasks such as making a copy,
scanning documents, sending and receiving faxes, or printing photos from a memory
card. You can access many HP All-in-One functions directly from the control panel,
without turning on your computer.
This section contains the following topics:
•
•
•
•
•

The HP All-in-One at a glance
Control panel overview
Menu overview
Text and symbols
Use the HP Photosmart Software

Label

Description

Automatic document feeder

Color graphics display (also referred to as the
display)

Output tray

Paper-width guide for the main input tray

Main input tray (also referred to as the input tray)

Paper tray extender (also referred to as the tray
extender)

Overview

The HP All-in-One at a glance

HP All-in-One overview

Chapter 2
(continued)

Label

Description

Paper-width and paper-length guides for the
photo tray

Paper-length guide for the main input tray

Photo tray

Ink cartridge door

Front USB port for your camera or other storage
device

Memory card slots and Photo light

Control panel

Glass

Lid backing

Ethernet port

Rear USB port

Power connection*

1-LINE (fax) and 2-EXT (phone) ports

Two-sided printing accessory
Use only with the power adapter supplied by HP.

Control panel overview
This section describes the functions of the control panel buttons and lights, as well as the
icons and sleep state on the display.
This section contains the following topics:

Overview

•
•
•

Control panel features
Display icons
Display sleep state

HP All-in-One overview

Control panel features
The following diagram and related table provide a quick reference to the HP All-in-One
control panel features.

Label

Name and Description

Display: Displays menus, photos, and messages. The angle of the display can be changed for
better viewing. Place a finger in the indented area to the left of the display and then pull up.

Attention light: Indicates a problem occurred. See the display for more information.

Back: Returns to the previous screen on the display.

Directional pad: Allows you to navigate through menu options by pressing the up, down, left,
or right arrow buttons.

OK: Selects a menu setting, value, or photo on the display.

Zoom out - (magnifying glass icon): Zooms out to show more of a photo. If you press this button
when a photo is shown on the display at 100%, the Fit to Page feature is applied to the photo
automatically.

Zoom in + (magnifying glass icon): Zooms in to enlarge the image on the display. You can also
use this button together with the arrows on the directional pad to adjust the crop box for
printing.

Photo Menu: Launches the Photosmart Express menu for printing, saving, editing, and
sharing photos.

Red Eye Removal: Turns the Red Eye Removal feature On or Off. By default, this feature is
turned off. When the feature is turned on, the HP All-in-One automatically corrects red eye
coloring in the photo currently shown on the display.

Copy Menu: Opens the Copy Menu where you can select copy options, such as number of
copies, paper size, and paper type.

Reprints: Enables you to make a copy of an original photo placed on the glass.

Control panel overview

Overview

If you are zooming in on a photo, you can also use the arrow buttons to pan around the photo
and select a different area to print.

Chapter 2
(continued)
Label

Name and Description

Fax Menu: Presents the Enter Fax Number screen to enter a fax number. If you press it again,
the Fax Menu appears where you can select fax options.

Auto Answer: When this button is lit, the HP All-in-One automatically answers incoming phone
calls. When off, the HP All-in-One does not answer any incoming fax calls.

Keypad: Enters fax numbers, values, or text.

On: Turns the HP All-in-One on or off. When the HP All-in-One is off, a minimal amount of power
is still supplied to the device. You can further reduce power supply by holding down the On
button for 3 seconds. This places the HP All-in-One in Federal Energy Management Program
(FEMP) mode. To completely remove power, turn the HP All-in-One off, and then unplug the
power cord.

Wireless radio light: Indicates that the 802.11 b and g wireless radio is turned on.

Space and #: Enter spaces and pound signs for fax-related tasks.
Symbols and *: Enter symbols and asterisks for fax-related tasks.

Start Fax Color: Starts a color fax.

Start Fax Black: Starts a black-and-white fax.

Scan Menu: Opens the Scan Menu where you can select a destination for your scan.

Start Copy Color: Starts a color copy.

Start Copy Black: Starts a black-and-white copy.

Print Photos: Depending on whether you access your photos from the View, Print, or Create
menu, the Print Photos button will display the Print Preview screen or it will print any selected
photo(s). If no photos are selected, a prompt appears asking if you want to print all the photos
on your card or storage device.

Cancel: Stops the current operation.

Setup: Presents the Setup Menu for generating reports, changing fax and network settings,
and accessing tools and preferences.

Help: Opens the Help Menu menu on the display where you can select a topic to learn more
about it. Depending on the topic you select, the topic will appear on your display or on your
computer screen.

Overview

From the idle state, pressing Help lists a menu of items for which the user can obtain help. When
viewing screens other than Idle, the Help button provides context sensitive help.

Display icons
The following icons can appear at the bottom of the display to provide important
information about the HP All-in-One.
Icon

Purpose
Shows the ink cartridge status. The color of the icon corresponds to the color of
the ink cartridge, and the fill level of the icon corresponds to the fill level of the
ink cartridge.

HP All-in-One overview

(continued)
Icon

Purpose
NOTE: The ink level icons will only appear if one of the ink cartridges is less
than 50% full. If the ink level for all ink cartridges is more than 50% full, the ink
cartridge icons do not appear on the display.
Shows that the ink cartridge is nearly empty, and will need to be replaced.

Shows that an unknown ink cartridge is inserted. This icon might appear if an
ink cartridge contains non-HP ink.

Shows the wired network connection status.

If the Auto Answer icon is showing on the display, the HP All-in-One will receive
faxes automatically. If there is no icon showing, you will have to receive faxes
manually.
Indicates the presence and signal strength of a wireless network connection.

Indicates the presence of an Ad hoc wireless network connection.

Indicates that an HP bt450, Printer and PC Adapter with Bluetooth® Wireless
Technology is connected to the front USB port.

To prolong the life of the display, it dims after two minutes of inactivity. After 30 minutes
of inactivity, the display goes into a sleep state and the screen shuts off completely. The
display turns back on when you press a control panel button, insert a memory card or
connect a storage device, lift the lid, or access the HP All-in-One from a connected
computer.

Menu overview
The following topics provide a quick reference to top-level menus that appear on the
HP All-in-One display.
•
•
•
•

Photosmart Express Menu
Copy Menu
Scan Menu
Fax Menu

Menu overview

Overview

Display sleep state

Chapter 2

•
•

Setup Menu
Help Menu

Photosmart Express Menu
The following options are available in the Photosmart Express menu when you insert a
memory card or storage device, or when you press Photo Menu on the control panel.

View

Create

Save

Copy Menu
The following options are available when you press the Copy Menu button on the control
panel.
Copies
Overview

Size
Quality
Lighter/Darker
Preview
Crop
Paper Size
Paper Type
Margin Shift
Enhancements
Set As New Defaults

HP All-in-One overview

Scan Menu
The following options are available when you press the Scan Menu button on the control
panel.
NOTE: The applications that appear on the Scan Menu vary depending on the
software applications installed on your computer.
Scan and Reprint
Scan to Memory Card
HP Photosmart Premier
Scan to Computer

NOTE: The Scan to Computer option only appears if the HP All-in-One is networkconnected.

Fax Menu
When you press the Fax Menu button, the Enter Fax Number screen appears where
you can enter a fax number.
If you press the Fax Menu button again, the Fax Menu appears where you can change
the following fax options.
Resolution
Lighter/Darker
Scan and Fax
Broadcast Fax
Send Fax Later
Poll to Receive
Set As New Defaults

The following options are available when you press the Setup button on the control panel.
Printable School Papers
Print Report
Speed Dial Setup
Basic Fax Setup
Advanced Fax Setup
Network
Tools
Preferences
Bluetooth Menu

Menu overview

Overview

Setup Menu

Chapter 2

NOTE: The Bluetooth Menu option only appears if an optional HP bt450, Printer
and PC Adapter with Bluetooth® Wireless Technology is attached to the HP All-inOne.

Help Menu
The Help Menu menu provides quick access to key help topics and is available when
you press the Help button. If you select one of the first six topics, the help appears on
the display. If you select one of the last six topics, the help appears on your computer.
The following options are available.
Use Control Panel
Insert Ink Cartridges
Load Paper in Photo Tray
Load Paper
Load Original on Scanner
Icon Glossary
How Do I
Error Messages
General Troubleshooting
Networking Troubleshooting
Use Memory Card
Get Support

Text and symbols
You can enter text and symbols from the control panel by using the visual keyboard. It
appears automatically on the display when setting up a wired or wireless network, the fax
header information, or speed dial entries. You can also use the keypad on the control
panel to enter text and symbols.

Overview

You can also enter symbols from the keypad when you dial a fax or phone number. When
the HP All-in-One dials the number, it will interpret the symbol and respond accordingly.
For example, if you enter a dash in the fax number, the HP All-in-One will pause before
dialing the remainder of the number. A pause is useful if you need to access an outside
line before dialing the fax number.
NOTE: If you want to enter a symbol in your fax number, such as a dash, you need
to enter the symbol by using the keypad.
This section contains the following topics:
•
•
•

Enter text using the keypad on the control panel
Enter text using the visual keyboard
Available symbols for dialing fax numbers

Enter text using the keypad on the control panel
You can enter text or symbols by using the keypad on the control panel.

HP All-in-One overview

To enter text
1. Press the keypad numbers that correspond to the letters of a name. For example, the
letters a, b, and c correspond to the number 2, as shown on the button below.

TIP: Press a button multiple times to see the available characters. Depending
on your language and country/region setting, other characters might be available
in addition to the ones shown on the keypad.
2. After the correct letter appears, wait for the cursor to advance automatically to the
right, or press . Press the number that corresponds to the next letter in the name.
Press the button multiple times until the correct letter appears. The first letter of a
word is automatically set to uppercase.
To enter a space, pause, or symbol
▲ To insert a space, press Space.
To enter a pause, press Symbols repeatedly until a dash appears.
To enter a symbol, such as @, press the Symbols button repeatedly to scroll through
the list of available symbols: asterisk (*), dash (-), ampersand (&), period (.), slash
(/), parentheses ( ), apostrophe ('), equals (=), number sign (#), at (@), underscore
(_), plus (+), exclamation (!), semicolon (;), question (?), comma (,), colon (:), percent
(%), and approximation (~).
To erase a letter, number, or symbol
▲ If you make a mistake, press to clear it, and then make the correct entry.
After you are done entering text, press OK to store your entry.

You can enter text or symbols by using the visual keyboard that automatically appears
on the display when you need to enter text. For example, the visual keyboard
automatically appears when you are setting up a wired or wireless network, the fax header
information, or speed dial entries.
TIP: You can also enter text and numbers using the visual keyboard by using the
keypad on the control panel of the HP All-in-One. Press a button numerous times to
access additional letters. For instance, press 2 three times to enter the letter C.

Text and symbols

Overview

Enter text using the visual keyboard

Chapter 2

To enter text using the visual keyboard
1. To select a letter, number, or symbol in the visual keyboard, press
to highlight the appropriate selection.

, and

To enter lowercase letters, uppercase letters, numbers, and symbols
• To enter lowercase letters, select the abc button on the visual keyboard, and then
press OK.
• To enter uppercase letters, select the ABC button on the visual keyboard, and
then press OK.
• To enter numbers, select the 123 button on the visual keyboard, and then press
OK.
• To enter symbols, select the .@! button on the visual keyboard, and then press
OK.
2. After you highlight the appropriate letter, number, or symbol, press OK on the control
panel to select it.
The selection appears on the display.

TIP: To erase a letter, number, or symbol, select Clear on the visual keyboard,
and then press OK.
3. When you are finished entering text, numbers, or symbols, select Done on the visual
keyboard, and then press OK.

Available symbols for dialing fax numbers
To enter a symbol, such as *, press Symbols repeatedly to scroll through the list of
symbols. The following table provides the symbols that you can use in a fax or phone
number sequence, fax header information, and speed dial entries.

Overview

Available
symbols

Description

Available when entering

Displays an asterisk symbol when
required for dialing.

Fax header name, speed dial
names, speed dial numbers, fax or
phone numbers, and monitor dial
entries

When auto-dialing, the HP All-in-One
enters a pause in the number sequence.

Fax header name, fax header
number, speed dial names, speed
dial numbers, and fax or phone
numbers

()

Displays a left or right parenthesis to
separate numbers, such as area codes,
for easier reading. These symbols do not
affect dialing.

Fax header name, fax header
number, speed dial names, speed
dial numbers, and fax or phone
numbers

When auto-dialing, W causes the HP Allin-One to wait for a dial tone before
continuing to dial.

Speed dial numbers and fax or
phone numbers

During auto-dialing, the R functions the
same as a Flash button on your telephone.

Speed dial numbers and fax or
phone numbers

HP All-in-One overview

(continued)
Available
symbols

Description

Available when entering

Displays a plus symbol. This symbol does
not affect dialing.

Fax header name, fax header
number, speed dial names, speed
dial numbers, and fax or phone
numbers

Use the HP Photosmart Software
The HP Photosmart Software provides a fast and easy way to make prints of your photos.
It also provides access to other basic HP imaging software features, such as saving and
viewing your photos.
For more information on using the HP Photosmart Software:

•

Check the Contents panel on the left. Look for the HP Photosmart Software Help
contents book at the top.
If you do not see the HP Photosmart Software Help contents book at the top of the
Contents panel, access the software help through the HP Solution Center.

Overview

•

Use the HP Photosmart Software

Chapter 2

Overview
22

HP All-in-One overview

Find more information
You can access a variety of resources, both printed and onscreen, that provide
information about setting up and using the HP All-in-One.
Setup Guide
The Setup Guide provides instructions for setting up the HP All-in-One and
installing software. Make sure you follow the steps in the Setup Guide in order.
If you have problems during setup, check the Setup Guide for troubleshooting
information, or see “Troubleshooting” on page 169 in this onscreen Help.

Basics Guide
The Basics Guide contains an overview of the HP All-in-One, including stepby-step instructions for basic tasks, troubleshooting tips, and technical
information.

HP Photosmart Essential animations
The HP Photosmart Essential animations are an interactive way to get a brief
overview of the software included with the HP All-in-One. You will learn how the
software can help you create, share, organize, and print your photos.
Onscreen Help
The onscreen Help provides detailed instructions on using all features of the
HP All-in-One.

•
•
•

The How Do I? topic provides links so you can quickly find information on
performing common tasks.
The HP All-in-One overview topic provides general information about the
main features of the HP All-in-One.
The Troubleshooting topic provides information about resolving errors
you might encounter with the HP All-in-One.

Readme
The Readme file contains the most recent information which might not be found
in other publications.
Install the software to access the Readme file.
If you have Internet access, you can get help and support from the HP Web
site. This Web site offers technical support, drivers, supplies, and ordering
information.

Find more information

www.hp.com/support

Find more information

Chapter 3

Find more information
24

Find more information

Finish setting up the HP All-inOne
After you have completed the steps in your Setup Guide, refer to this section to help you
finish setting up the HP All-in-One. This section contains important setup-related
information for your device, including information on setting preferences.
This section contains the following topics:
•
•
•
•

Set your preferences
Computer connection information
Connect to a network
Fax setup

Set your preferences
You can change the settings on the HP All-in-One so that it behaves according to your
preference. For example, you can set general device preferences, such as the language
used to display messages and the date and time on the display. You can also restore the
device settings to what they were when you purchased your device. This will erase any
new defaults you have set.
This section contains the following topics:
•
•

General preferences
Fax preferences

General preferences
Before you begin using the HP All-in-One, you should review and, if necessary, adjust
the general device settings described in this section.
This section contains the following topics:
•
•
•
•
•
•
•
•

Set your language and country/region
Set the date and time
Adjust the volume
Set the default paper tray for PictBridge/DPOF/uPnP printing
Enable faster browsing of photos
Set the paper tray for printing from a Bluetooth device
Restore the factory defaults
Play a slideshow on the display

Set your language and country/region
The language setting determines which language the HP All-in-One uses to show
messages on the display. The country/region setting determines the default paper sizes
and layouts for printing. You can change these settings at any time by using the following
procedure.

Finish setting up the HP All-in-One

Finish setup

Chapter 4

Finish setup

To set your language and country/region
1. Press Setup.
2. Press to highlight Preferences, and then press OK.
3. Press to highlight Set Language, and then press OK.
4. Press to scroll through the languages. When the language you want to use
appears, press OK.
5. When prompted, press to highlight Yes or No, and then press OK.
6. Press to highlight Set Country/Region, and then press OK.
7. Press to scroll through the countries/regions. When the country/region you want
to use appears, press OK.
8. When prompted, press to highlight Yes or No, and then press OK.
Set the date and time
You can set the date and time from the control panel. The date and time format is based
on the language and country/region setting. When you send a fax, the current date and
time are transmitted, along with your name and fax number, as part of the fax header.
NOTE: In some countries/regions, the date and time stamp on the fax header is a
legal requirement.
The HP All-in-One has a battery-powered clock so the date and time setting is not lost
when the device is unplugged.
To set the date and time
1. Press Setup.
2. Press to highlight Tools, and then press OK.
3. Press to highlight Date and Time, and then press OK.
4. Enter the month, day, and year by pressing the appropriate numbers on the keypad.
Depending on your country/region setting, you might enter the date in a different
order.
5. Enter the hours and minutes.
6. If your time is displayed in the 12-hour format, press 1 for AM, or 2 for PM.
The new date and time settings appear on the display.
Adjust the volume
You can adjust the volume of different aspects of the HP All-in-One, including the sounds
associated with device events, errors, and fax tones.
To adjust the volume sound effects
1. Press Setup.
2. Press to highlight Preferences, and then press OK.
3. Press to highlight Sound Effects Volume, and then press OK.
4. Press to highlight Soft, Loud, or Off, and then press OK to select the volume you
want.

Finish setting up the HP All-in-One

NOTE: If you select Off, you will not hear a dial tone, fax tones, or incoming ring
tones. With the Fax Sound Volume set to Off, you cannot send a fax using
monitor dialing, such as when using a calling card to send a fax.
Related topics
“Send a fax using monitor dialing” on page 134
Set the default paper tray for PictBridge/DPOF/uPnP printing
Set the default paper tray to use when you print photos from a Pictbridge device, DPOF
file, or a UPnP device. The default setting is Photo Tray.
To set the default paper tray
1. Press Setup.
2. Press to highlight Preferences, and then press OK.
3. Press to highlight PictBridge/DPOF/uPnP Tray Select, and then press OK.
4. Press or to highlight Main Tray or Photo Tray, and then press OK to select the
tray you want.
Enable faster browsing of photos
You can set up the HP All-in-One to enable faster photo browsing by writing small
thumbnails to the memory card. The thumbnails take up a relatively small amount of
space and are used to speed up the browsing performance of photos on the card.
NOTE: This feature is on by default.
To turn faster browsing on or off
1. Press Setup.
2. Press to highlight Preferences, and then press OK.
3. Press to highlight Enable Faster Photo Browsing, and then press OK.
4. Press or to highlight On or Off, and then press OK.
Set the paper tray for printing from a Bluetooth device
Set the default paper tray to use when you print photos from a Bluetooth device.
To set the paper tray for printing from a Bluetooth device
1. Press Setup.
2. Press to highlight Bluetooth, and then press OK.

Set your preferences

Finish setup

To adjust the volume of fax sounds
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
3. Press to highlight Fax Sound Volume, and then press OK.
4. Press to highlight one of the options: Soft, Loud, or Off, and then press OK.

Chapter 4

3. Press
4. Press

to highlight Bluetooth Tray Select, and then press OK.
to highlight Main Tray or Photo Tray, and then press OK.

Restore the factory defaults
You can restore the current settings to what they were when you purchased the HP Allin-One.
Finish setup

NOTE: Restoring the factory defaults will not affect any changes you made to scan
settings and the language and country/region settings.
You can perform this process from the control panel only.
NOTE: Restoring the factory defaults does not erase any information you entered,
such as the date and time and the fax header. It also does not delete any information
saved to memory, such as the fax log and caller ID history.
To restore the factory defaults
1. Press Setup.
2. Press to highlight Tools, and then press OK.
3. Press to highlight Restore Factory Defaults, and then press OK.
The factory default settings are restored.
Play a slideshow on the display
You can set up the HP All-in-One to play a slideshow on the display, similar to a
screensaver on a computer, when you are not using the device.
There are two types of slideshows that you can enable:
•

Store Demo: appears after the HP All-in-One is inactive for one minute and shows a
set of predefined graphics that describe features of the device. The slideshow plays
until you press a button or use the device. If the HP All-in-One remains inactive for
eight hours, the display turns off.
NOTE: HP recommends leaving Store Demo off.

•

Tips Slideshow: appears only after you print from the computer. The HP All-in-One
shows a set of predefined slides with information about special features that you can
do with the device. The slideshow plays through once and then the display returns to
the main menu.

To turn the store demo on or off
1. Press Setup.
2. Press to highlight Tools, and then press OK.
3. Press to highlight Store Demo, and then press OK.
4. Press or to highlight On or Off, and then press OK.
To turn the tips demo on or off
1. Press Setup.
2. Press to highlight Tools, and then press OK.
28

Finish setting up the HP All-in-One

3. Press
4. Press

to highlight Tips Slideshow, and then press OK.
or to highlight On or Off, and then press OK.

You should review the information in the Fax setup section of the printed documentation
to find out the recommended settings for the options described in the following topics.
The recommended settings depend on how you set up the HP All-in-One for faxing with
the other equipment and services that you might have on the same phone line as the
HP All-in-One.
NOTE: Before setting the fax preferences described in this section, make sure you
have set the language/country/region and date/time preferences.
This section contains the following topics:
•
•
•

Set up the HP All-in-One to redial a fax number automatically
Set tone or pulse dialing
Set the fax speed

Related topics
• “Fax setup” on page 61
• “General preferences” on page 25
Set up the HP All-in-One to redial a fax number automatically
You can set the HP All-in-One to redial a busy or an unanswered number automatically.
The default Busy Redial setting is Redial. The default No Answer Redial setting is No
Redial.
To set redial options from the control panel
1. Press Setup.
2. Do one of the following:
To change the Busy Redial setting
a. Press to highlight Advanced Fax Setup, and then press OK.
b. Press to highlight Busy Redial, and then press OK.
To change the No Answer Redial setting
a. Press to highlight Advanced Fax Setup, and then press OK.
b. Press to highlight No Answer Redial, and then press OK.
3. Press to highlight Redial or No Redial, and then press OK.
Set tone or pulse dialing
You can set the dial mode for the HP All-in-One to either tone dialing or pulse dialing.
Most telephone systems work with either type of dialing. If your telephone system does
not require pulse dialing, HP recommends using tone dialing. If you have a public
telephone system or a private branch exchange (PBX) system, you might need to select

Set your preferences

Finish setup

Fax preferences

Chapter 4

Pulse Dialing. Contact your local telephone company if you are unsure which setting to
use.
NOTE: If you select Pulse Dialing, some phone system features might not be
available. It can also take longer to dial a fax or phone number.
NOTE: This feature is not supported in all countries/regions. If it is not supported in
your country/region, Tone or Pulse Dialing does not appear in the Basic Fax
Setup menu.
Finish setup

To set tone or pulse dialing from the control panel
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
3. Press to highlight Tone or Pulse Dialing, and then press OK.
4. Press to select Tone Dialing or Pulse Dialing, and then press OK.
Set the fax speed
You can set the fax speed used to communicate between the HP All-in-One and other
fax machines when sending and receiving faxes. The default fax speed varies by country/
region.
If you use one of the following, setting the fax speed to a slower speed might be required:
•
•
•
•

An Internet phone service
A PBX system
Fax over Internet Protocol (FoIP)
An integrated services digital network (ISDN) service

If you experience problems sending and receiving faxes, you might want to try setting the
Fax Speed setting to Medium (14400) or Slow (9600).
To set the fax speed from the control panel
1. Press Setup.
2. Press to highlight Advanced Fax Setup, and then press OK.
3. Press to highlight Fax Speed, and then press OK.
4. Press to select one of the following settings, and then press OK.
Fax speed setting

Fax speed

Fast (33600)

v.34 (33600 baud)

Medium (14400)

v.17 (14400 baud)

Slow (9600)

v.29 (9600 baud)

Computer connection information
The HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. You can also connect the HP All-in-One to either a wired
or wireless network. If you insert an HP bt450, Printer and PC Adapter with Bluetooth®

Finish setting up the HP All-in-One

Wireless Technology into the front USB port, Bluetooth® devices such as PDAs and
camera phones can print to the HP All-in-One.
NOTE: In the remainder of this chapter, the HP bt450, Printer and PC Adapter with
Bluetooth® Wireless Technology is referred to simply as an HP bt450.
This section contains the following topics:

•

Supported connection types
Connect using Ethernet
Connect using integrated wireless WLAN 802.11
Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless
Technology
Use printer sharing

Finish setup

•
•
•
•

Supported connection types
Description

Recommended number
of connected
computers for best
performance

Supported software
features

Setup instructions

USB connection

One computer connected
with a USB cable to the
rear USB 2.0 High Speed
port on the HP All-in-One.

All features are
supported, except
Webscan.

Follow the Setup Guide
for detailed instructions.

Ethernet (wired)
connection

Up to five computers
connected to an HP Allin-One using a hub or
router.

All features are
supported, including
Webscan.

Follow the instructions in
“Wired network setup”
on page 37.

Wireless WLAN 802.11
connection

Up to five computers
connected using a
wireless router
(infrastructure mode).

All features are
supported, including
Webscan.

Follow instructions in
“Integrated wireless
WLAN 802.11 network
setup” on page 39.

HP bt450, Printer and PC
Adapter with Bluetooth®
Wireless Technology

One Bluetooth device or
computer.

Printing from a Bluetooth
device such as a PDA or
camera phone, or a
Bluetooth-enabled
computer.

Follow the instructions in
“Connect using the
HP bt450, Printer and PC
Adapter with Bluetooth®
Wireless Technology”
on page 32.

Printer sharing

Five.

All features resident on
the host computer are
supported. Only print is
supported from the other
computers.

Follow the instructions in
“Use printer sharing”
on page 36.

The host computer must
be turned on at all times,
or the other computers
will not be able to print to
the HP All-in-One.

Connect using Ethernet
The HP All-in-One supports both 10 Mbps and 100 Mbps Ethernet network connections.
For detailed instructions on connecting the HP All-in-One to an Ethernet (wired) network,
see “Wired network setup” on page 37.

Computer connection information

Chapter 4

Connect using integrated wireless WLAN 802.11
The HP All-in-One uses an internal networking component that supports a wireless
network. For detailed instructions on connecting the HP All-in-One to a wireless (802.11)
network, see “Integrated wireless WLAN 802.11 network setup” on page 39.

Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless
Technology
Finish setup

HP bt450, Printer and PC Adapter with Bluetooth® Wireless Technology allows you to
print images from most Bluetooth devices, including computers. Simply insert the HP
bt450 into the front USB port and print from a Bluetooth device such as a PDA or camera
phone.
This section contains the following topics:
•
•
•

Find the device name and address
Set Bluetooth security for the HP All-in-One
Use a Bluetooth® connection to print from your computer

Find the device name and address
Some Bluetooth devices exchange device addresses when they communicate with each
other, so you might need to find out the device address of the HP All-in-One in order to
establish a connection. Also, some Bluetooth devices display the name of the printer
when connected. If you do not want the default name displayed as the name of the HP Allin-One, you can change the device name.
To find out the device address of the HP All-in-One
1. Insert the HP bt450 into the front USB port.
2. On the control panel of the HP All-in-One, press Setup.
3. Press until Bluetooth is highlighted, and then press OK.
4. Press until Device Address is highlighted, and then press OK.
The Device Address appears, which is read only.
5. To enter the address into your device, follow the instructions that came with your
Bluetooth device.
6. Press OK to exit the Setup menu.
To change the device name of the HP All-in-One
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Bluetooth is highlighted, and then press OK.
3. Press until Device Name is highlighted, and then press OK.
NOTE: The HP All-in-One ships with the predefined name of Photosmart
C7200.
4. Use the keypad to enter a new name.

Finish setting up the HP All-in-One

5. When you have finished entering a name for the HP All-in-One, press OK.
The name you entered will appear on your Bluetooth device when you connect to the
HP All-in-One to print.
6. Press OK to exit the Setup menu.

Set Bluetooth security for the HP All-in-One
You can enable printer security settings through the Bluetooth menu on the HP All-inOne. Press Setup on the control panel, and select Bluetooth. From the Bluetooth menu,
you can:
•
•

Require passkey authentication prior to someone printing to the HP All-in-One from
a Bluetooth device.
Make the HP All-in-One visible or invisible to Bluetooth devices that are within range.

This section contains the following topics:
•
•
•

Use a passkey to authenticate Bluetooth devices
Set the HP All-in-One to be invisible to Bluetooth devices
Reset Bluetooth settings on the HP All-in-One

Use a passkey to authenticate Bluetooth devices
You can set the security level of the HP All-in-One to either Low or High. The default
security setting is Low. Low level security does not require authentication.
•

•

Low: This is the default security setting. Low level security does not require a
passkey, as it does not support authentication. Any Bluetooth device within range can
print to it.
High: High level security requires a passkey, as it supports authentication. The
Bluetooth device must provide a passkey, before the HP All-in-One will allow the
device to send a print job to it.
NOTE: The HP All-in-One ships with a predefined passkey that is set to four zeroes
"0000".

To set the HP All-in-One to require passkey authentication
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Bluetooth is highlighted, and then press OK.
3. Press until Passkey is highlighted, and then press OK.
4. Use the keypad to enter a new passkey.
NOTE: The passkey must be 1 to 4 characters long, and can only consist of
numbers.
5. When you have finished entering your passkey, press OK.
The Bluetooth menu appears.

Computer connection information

Finish setup

Related topics
“Text and symbols” on page 18

Chapter 4

6. Press until Security Level is highlighted, and then press OK.
7. Press OK to select High.
High level security requires authentication.
Passkey authentication is now set for the HP All-in-One.
Related topics
“Text and symbols” on page 18
Finish setup

Set the HP All-in-One to be invisible to Bluetooth devices
You can set the HP All-in-One to be either Visible to all Bluetooth devices (public) or
Not visible to any (private).
•
•

Visible to all: Any Bluetooth device within range can print to the HP All-in-One.
Not visible: Only Bluetooth devices that have stored the device address of the HP Allin-One can print to it.
NOTE: The HP All-in-One ships with a default accessibility level of Visible to all.

To set the HP All-in-One to be Not visible
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Bluetooth is highlighted, and then press OK.
3. Press until Visibility is highlighted, and then press OK.
4. Press to select Not visible, and then press OK.
The HP All-in-One is inaccessible to Bluetooth devices that have not stored its device
address.
Reset Bluetooth settings on the HP All-in-One
You can reset all of the Bluetooth settings on the HP All-in-One to the factory defaults.
NOTE: Only select Reset Bluetooth if you want all of the HP All-in-One Bluetooth
settings returned to factory defaults.
To reset the Bluetooth settings
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Bluetooth is highlighted, then press OK.
3. Press until Reset Bluetooth is highlighted, then press OK.
Use a Bluetooth® connection to print from your computer
A Bluetooth connection provides a quick and easy way to print images from a Bluetoothenabled computer without using a cable. With a Bluetooth connection you can access
many of the same printing features as with a USB connection. For example, you can
check the printer status, as well as the estimated amount of ink remaining in your ink
cartridges.

Finish setting up the HP All-in-One

NOTE: The only software functionality available with a Bluetooth connection is
printing. Scanning and software-based faxing cannot be done over a Bluetooth
connection. However, stand-alone copy and fax functions are still available.

You must have Windows XP or Windows Vista and either the Microsoft Bluetooth®
Protocol Stack or the Widcomm Bluetooth® Protocol Stack installed in order to connect
the HP All-in-One. It is possible to have both the Microsoft Stack and the Widcomm Stack
on your computer, but you use only one of them to connect the HP All-in-One.
•

•

Microsoft stack If you have Windows XP with Service Pack 2 or Windows Vista
installed on your computer, then your computer has the Microsoft Bluetooth® Protocol
Stack. The Microsoft stack allows you to install an external Bluetooth® adapter
automatically. If your Bluetooth® adapter supports the Microsoft stack but it does not
install automatically, then you do not have the Microsoft stack on your computer.
Check the documentation that came with the Bluetooth® adapter to see if it supports
the Microsoft stack.
Widcomm stack: If you have an HP computer with Bluetooth® built in, or if you have
installed an HP bt450, then your computer has the Widcomm stack. If you have an
HP computer and plug in an HP bt450, it will install automatically using the Widcomm
stack.

To install and print using the Microsoft stack
1. Make sure that you have installed the HP All-in-One software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver
is available for the Bluetooth® connection. Therefore, if you have already installed
the software, you do not need to reinstall it. If you want both a USB and a
Bluetooth® connection to the HP All-in-One, install the USB connection first. For
more information, see the Setup Guide. However, if you do not want a USB
connection, select Directly to the computer on the Connection Type screen.
Also, on the Connect Your Device Now screen, select the check box next to If
you are unable to connect your device now... at the bottom of the screen.
2. Attach an HP bt450 to the front USB port of the HP All-in-One.
3. If you are using an external Bluetooth® adapter for your computer, make sure your
computer is started and then attach the Bluetooth® adapter to a USB port on the
computer. If you have Windows XP with Service Pack 2 or Windows Vista installed,
the Bluetooth® drivers are installed automatically. If you are prompted to select a
Bluetooth® profile, select HCRP.
If your computer has Bluetooth® built in, just make sure the computer is started.
4. On the Windows taskbar, click Start, and then click Printers and Faxes (or click
Control Panel, and then Printers).
5. Double-click the Add Printer icon (or click Add a printer).
6. Click Next, and then select A Bluetooth Printer.
7. Follow the onscreen instructions to finish the installation.
8. Print as you would to any printer.

Computer connection information

Finish setup

Before you print, you must connect an HP bt450, Printer and PC Adapter with
Bluetooth® Wireless Technology to the HP All-in-One.

Chapter 4

To install and print using the Widcomm stack
1. Make sure that you have installed the HP All-in-One software on the computer.

Finish setup

NOTE: The purpose of installing the software is to make sure the printer driver
is available for the Bluetooth® connection. Therefore, if you have already installed
the software, you do not need to reinstall it. If you want both a USB and a
Bluetooth® connection to the HP All-in-One, install the USB connection first. For
more information, see the Setup Guide. However, if you do not want a USB
connection, select Directly to the computer on the Connection Type screen.
Also, on the Connect Your Device Now screen, select the check box next to If
you are unable to connect your device now... at the bottom of the screen.
2.
3.
4.
5.

Attach an HP bt450 to the front USB port of the HP All-in-One.
Click the My Bluetooth Places icon on the desktop or in the taskbar.
Click View devices in range.
Once the available printers are discovered, double-click the name of HP All-in-One
to finish the installation.
6. Print as you would to any printer.

Use printer sharing
If your computer is on a network, and another computer on the network has an HP Allin-One connected to it by a USB cable, you can print to that printer using printer sharing.
The computer directly connected to the HP All-in-One acts as the host for the printer and
has full software functionality. The other computer, which is referred to as a client, has
access only to the print features. You must perform other functions from the host
computer or from the control panel on the HP All-in-One.
To enable printer sharing on a Windows computer
▲ Refer to the user guide that came with your computer or see the Windows onscreen
Help.

Connect to a network
This section describes how to connect the HP All-in-One to a network and how to view
and manage network settings.

If you want to:

See this section:

Connect to a wired (Ethernet) network.

“Wired network setup” on page 37

Connect to a wireless network with a wireless
router (infrastructure).

“Integrated wireless WLAN 802.11 network
setup” on page 39

Connect directly to a wireless-capable
computer without a wireless router (ad hoc).

“Wireless ad hoc network setup” on page 43

Install the HP All-in-One software for use in a
networked environment.

“Install the software for a network connection”
on page 46

Add connections to more computers on the
network.

“Connect to additional computers on a
network” on page 47

Finish setting up the HP All-in-One

If you want to:

See this section:

Change the HP All-in-One from a USB
connection to a network connection.

“Change the HP All-in-One from a USB
connection to a network connection”
on page 47

NOTE: Use the instructions in this section if
you first installed the HP All-in-One with a USB
connection, and you now want to change to
either a wireless or Ethernet network
connection.
View or change the network settings.

“Manage your network settings” on page 48

Find troubleshooting information.

“Network troubleshooting” on page 183

Finish setup

(continued)

NOTE: You can connect the HP All-in-One to either a wireless or wired network, but
not both at the same time.

Wired network setup
This section describes how to connect the HP All-in-One to a router, switch, or hub using
an Ethernet cable and how to install the HP All-in-One software for a network connection.
This is known as a wired or Ethernet network.

To set up the HP All-in-One on a wired
network, you need to do the following:

See this section:

First, collect all of the required materials.

“What you need for a wired network”
on page 38

Next, connect to a wired network.

“Connect the HP All-in-One to the network”
on page 38

Finally, install the software.

“Install the software for a network connection”
on page 46

Connect to a network

Chapter 4

What you need for a wired network
Before you connect the HP All-in-One to a network, make sure you have all of the required
materials.
❑ A functional Ethernet network that includes a router, switch, or hub with an Ethernet
port.
❑ CAT-5 Ethernet cable.
Finish setup

Although standard Ethernet cables look similar to standard telephone cables, they
are not interchangeable. There is a different number of wires in each one, and each
has a different connector. An Ethernet cable connector (also called an RJ-45
connector) is wider and thicker and always has 8 contacts on the end. A phone
connector has between 2 and 6 contacts.
❑ A desktop computer or laptop with an Ethernet connection.
NOTE: The HP All-in-One supports both 10 Mbps and 100 Mbps Ethernet
networks. If you are purchasing, or have purchased, a network interface card
(NIC), make sure it can operate at either speed.
Connect the HP All-in-One to the network
An Ethernet port is provided on the back of the HP All-in-One.
To connect the HP All-in-One to the network
1. Remove the yellow plug from the back of the HP All-in-One.

Finish setting up the HP All-in-One

Finish setup

2. Connect the Ethernet cable to the Ethernet port on the back of the HP All-in-One.

3. Connect the other end of the Ethernet cable to an available port on your Ethernet
router or switch.

4. Once you have connected the HP All-in-One to the network, install the software.
Related topics
“Install the software for a network connection” on page 46

Integrated wireless WLAN 802.11 network setup
For optimal performance and security in your wireless network, HP recommends you use
a wireless router or access point (802.11) to connect the HP All-in-One and the other
network elements. When network elements are connected through a wireless router or
access point, this is called an infrastructure network.

Connect to a network

Chapter 4

The advantages of a wireless infrastructure network as compared to an ad hoc network
include:
•
•
•
•
•

Advanced network security
Enhanced reliability
Network flexibility
Better performance, especially with 802.11 g mode
Shared Broadband Internet access

Finish setup

To set up the HP All-in-One on an integrated
wireless WLAN 802.11 network, you need to
do the following:

See this section:

First, collect all of the required materials.

“What you need for an integrated wireless
WLAN 802.11 network” on page 40

Next, connect the HP All-in-One to the wireless
router, and run the Wireless Setup Wizard.

“Connect to an integrated wireless WLAN
802.11 network” on page 40

Finally, install the software.

“Install the software for a network connection”
on page 46

What you need for an integrated wireless WLAN 802.11 network
To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will
need the following:
❑ A wireless 802.11 network that includes a wireless router or access point.
❑ A desktop computer or laptop with either wireless networking support, or a network
interface card (NIC). The computer must be connected to the wireless network that
you intend to install the HP All-in-One on.
❑ Broadband Internet access (recommended) such as cable or DSL.
If you connect the HP All-in-One on a wireless network that has Internet access, HP
recommends that you use a wireless router (access point or base station) that uses
Dynamic Host Configuration Protocol (DHCP).
❑ Network name (SSID).
❑ WEP key or WPA Passphrase (if needed).
Connect to an integrated wireless WLAN 802.11 network
The Wireless Setup Wizard provides an easy way to connect the HP All-in-One to your
network. You can also use SecureEasySetup, if your wireless router or access point

Finish setting up the HP All-in-One

CAUTION: To prevent other users from accessing your wireless network, HP
strongly recommends using a password or passphrase (WPA or WEP security) and
a unique network name (SSID) for your wireless router. Your wireless router might
have been shipped with a default network name, which is typically the manufacturer
name. If you use the default network name, your network can be easily accessed by
other users using the same default network name (SSID). It also means that the
HP All-in-One might accidently connect to a different wireless network in your area
which uses the same network name. If this happens you will not be able to access
the HP All-in-One. For more information on how to change the network name, see
the documentation that came with your wireless router.
NOTE: Before connecting to a wireless infrastructure network, ensure that the
ethernet cable is not connected to the HP All-in-One.
To connect the HP All-in-One with the Wireless Setup Wizard
1. Write down the following information about your wireless router or access point:
• Network Name (also called SSID)
• WEP Key, WPA Passphrase (if needed)
If you do not know where to find this information, see the documentation that came
with your wireless router or access point. You might be able to find the network name
(SSID) and the WEP key or WPA passphrase on the Embedded Web Server for the
wireless router or access point.
2. On the control panel of the HP All-in-One, press Setup.
3. Press until Network is highlighted, and then press OK.
4. Press to highlight Wireless Setup Wizard, and then press OK.
This runs the Wireless Setup Wizard. The setup wizard searches for available
networks, and then displays a list of detected network names (SSIDs). The networks
with the strongest signal appear first, the weakest appear last.
The wireless network test also runs, performing a series of diagnostic tests to
determine whether network setup is successful. The wireless network test prints upon
completion of the test.
5. Press to highlight the name of the network you wrote down in step 1, and then
press OK.
If you do not see your network name in the list
a. Select Enter a New Network Name (SSID). If necessary, use the to highlight
it, and then press OK.
The visual keyboard appears.
b. Enter the SSID. Use the arrow buttons on the HP All-in-One control panel to
highlight a letter or number on the visual keyboard, and then press OK to select
it.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.

Connect to a network

Finish setup

supports this feature. See the documentation that came with your wireless router or
access point to find out if it supports using EasySetup and for additional setup instructions.

Chapter 4

c. When you have finished entering the new SSID, use the arrow buttons to highlight
Done on the visual keyboard, and then press OK.

TIP: If the HP All-in-One is unable to discover the network based on the
network name you entered, you will see the following prompts. You may want
to move the HP All-in-One closer to the computer and try running the Wireless
Setup Wizard again to automatically discover the network.
Finish setup

d. Press until Infrastructure is highlighted, and then press OK.
e. Press until WEP encryption or WPA encryption is highlighted, and then press
OK.
If you do not want to use WEP encryption, press until No, my network does
not use encryption is highlighted, and then press OK. Go to step 7.
6. If prompted, enter your WPA or WEP key as follows:
a. Use the arrow buttons to highlight a letter or number on the visual keyboard, and
then press OK to select it.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.
b. When you are finished entering the WPA or WEP key, use the arrow buttons to
highlight Done on the visual keyboard.
c. Press OK to confirm.
The HP All-in-One will attempt to connect to the network. If a message says you
entered an invalid WPA or WEP key, check the key you wrote down for your new
network, follow the prompts to correct the key, and then try again.
7. When the HP All-in-One connects successfully to the network, install the software on
each computer that will use the device over the network.
To connect the HP All-in-One with SecureEasySetup
1. Activate SecureEasySetup on your wireless router or access point.
2. On the control panel of the HP All-in-One, press Setup.
3. Press until Network is highlighted, and then press OK.
4. Press to highlight Wireless Setup Wizard, and then press OK.
5. Follow the onscreen prompts on the display to complete the connection.
6. When the HP All-in-One connects successfully to the network, go to your computer
to install the software on each computer that will use the network.
NOTE: If the connection fails, the wireless router or access point might have
timed out after you activated SecureEasySetup. Repeat the above task, ensuring
that you complete the steps on the control panel of the HP All-in-One immediately
after pressing the button on the wireless router or access point.
Related topics
• “Enter text using the visual keyboard” on page 19
• “Install the software for a network connection” on page 46
• “Network troubleshooting” on page 183

Finish setting up the HP All-in-One

Wireless ad hoc network setup

Finish setup

Use this section if you want to connect the HP All-in-One to a wireless-capable computer
without using a wireless router or access point.

NOTE: An ad hoc connection is available if you do not have a wireless router or
access point. However, it provides little flexibility, a low level of network security, and
slower network performance than with a wireless router or access point.
In order to connect the HP All-in-One to your computer (ad hoc), you need to create an
ad hoc network profile on your computer. This includes choosing a network name (SSID)
and WEP security (optional but recommended) for your ad hoc network.
To set up the HP All-in-One on a wireless ad
hoc network, you need to do the following:

See this section:

First, collect all of the required materials.

“What you need for an ad hoc network”
on page 43

Next, prepare your computer by creating a
network profile.

“Create a network profile for a Windows XP
computer” on page 43
“Create a network profile for other operating
systems” on page 45

Next, run the Wireless Setup Wizard.

“Connect to a wireless ad hoc network”
on page 45

Finally, install the software.

“Install the software for a network connection”
on page 46

What you need for an ad hoc network
To connect the HP All-in-One to a wireless network, you will need a Windows computer
with a wireless network adapter.
Create a network profile for a Windows XP computer
Prepare your computer for an ad hoc connection by creating a network profile.
To create a network profile
NOTE: The HP All-in-One comes configured with a network profile with hpsetup as
the network name (SSID). However, for security and privacy HP recommends you
create a new network profile on your computer as described here.

Connect to a network

Chapter 4

Finish setup

1. In the Control Panel, double-click Network Connections.
2. On the Network Connections window, right-click the Wireless Network
Connection. If you see Enable on the pop-up menu, select it. Otherwise, if you see
Disable on the menu, the wireless connection is already enabled.
3. Right-click the Wireless Network Connection icon, and then click Properties.
4. Click the Wireless Networks tab.
5. Select the Use Windows to configure my wireless network settings check box.
6. Click Add, and then do the following:
a. In Network name (SSID) box, type in a unique network name of your choice.
NOTE: The network name is case sensitive, so it is important to remember
any uppercase (capital) and lowercase (small) letters.
b. If there is a Network Authentication list, select Open. Otherwise, go to the next
step.
c. In the Data encryption list, select WEP.
NOTE: It is possible to create a network that does not use a WEP key.
However, HP recommends using a WEP key in order to secure your network.
d. Make sure that the check box is not selected next to The key is provided for me
automatically. If it is selected, click the check box to clear it.
e. In the Network key box, type a WEP key that has exactly 5 or exactly 13
alphanumeric (ASCII) characters. For example, if you enter 5 characters, you
might enter ABCDE or 12345. Or, if you enter 13 characters, you might enter
ABCDEF1234567. (12345 and ABCDE are examples only. Select a combination
of your choosing.)
Alternatively, you can use HEX (hexadecimal) characters for the WEP key. A HEX
WEP key must be 10 characters for 40 bit encryption, or 26 characters for 128 bit
encryption.
f. In the Confirm network key box, type the same WEP key you typed in the
previous step.
g. Write down the WEP key exactly as you typed it, including uppercase and
lowercase letters.
NOTE: You must remember the exact uppercase (capital) and lowercase
(small) letters. If you enter your WEP key incorrectly on the HP All-in-One, the
wireless connection will fail.
h. Select the check box for This is a computer-to-computer (ad hoc) network;
wireless access points are not used.
i. Click OK to close the Wireless network properties window, and then click OK
again.
j. Click OK again to close the Wireless Network Properties Connection window.
Related topics
• “Network glossary” on page 59
• “Connect to a wireless ad hoc network” on page 45

Finish setting up the HP All-in-One

Create a network profile for other operating systems
If you have an operating system other than Windows XP, HP recommends that you use
the configuration program that came with your wireless LAN card. To find the
configuration program for your wireless LAN card, access your computer's list of
programs.

•

Network name (SSID): Mynetwork (example only)
NOTE: You should create a network name that is unique and easy for you to
remember. Just remember that the network name is case-sensitive. Therefore,
you must remember which letters are uppercase and lowercase.

•
•

Communication mode: Ad Hoc
Encryption: enabled

Connect to a wireless ad hoc network
You can use the Wireless Setup Wizard to connect the HP All-in-One to a wireless ad
hoc network.
To connect to a wireless ad hoc network
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
3. Press to highlight Wireless Setup Wizard, and then press OK.
This runs the Wireless Setup Wizard. The setup wizard searches for available
networks, and then displays a list of detected network names (SSIDs). The
infrastructure networks appear first in the list, followed by available ad hoc networks.
The networks with the strongest signal appear first, the weakest appear last.
4. On the display, look for the network name you created on your computer (for example,
Mynetwork).
5. Use the arrow buttons to highlight the network name, and then press OK.
If you found your network name and selected it, go on to step 6.
If you do not see your network name in the list
a. Select Enter a New Network Name (SSID).
The visual keyboard appears.
b. Enter the SSID. Use the arrow buttons on the HP All-in-One control panel to
highlight a letter or number on the visual keyboard, and then press OK to select
it.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.

Connect to a network

Finish setup

Using the LAN card configuration program, create a network profile that has the following
values:

Chapter 4

c. When you have finished entering the new SSID, use the arrow buttons to highlight
Done on the visual keyboard, and then press OK.

d. Press until Ad Hoc is highlighted, and then press OK.
e. Press until Yes, my network uses WEP encryption is highlighted, and then
press OK. The visual keyboard displays.
If you do not want to use WEP encryption, press until No, my network does
not use encryption is highlighted, and then press OK. Go to step 7.
6. If prompted, enter your WEP key as follows. Otherwise go to step 7.
a. Use the arrow buttons to highlight a letter or number on the visual keyboard, and
then press OK to select it.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.
b. When you are finished entering the WEP key, use the arrow buttons to highlight
Done on the visual keyboard.
7. Press OK again to confirm.
The HP All-in-One will attempt to connect to the SSID. If a message says you entered
an invalid WEP key, check the key you wrote down for your new network, follow the
prompts to correct the WEP key, and then try again.
8. When the HP All-in-One connects successfully to the network, go to your computer
to install the software.
Related topics
• “Enter text using the visual keyboard” on page 19
• “Install the software for a network connection” on page 46
• “Network troubleshooting” on page 183

Install the software for a network connection
Use this section to install the HP All-in-One software on a computer connected to a
network. Before you install the software, make sure you have connected the HP All-inOne to a network.
NOTE: If your computer is configured to connect to a series of network drives, make
sure that your computer is currently connected to these drives before installing the
software. Otherwise, HP All-in-One installation software might try to use one of the
reserved drive letters, and you will not be able to access that network drive on your
computer.
NOTE: Installation time can range from 20 to 45 minutes depending on your
operating system, the amount of available space, and the processor speed of your
computer.

Finish setting up the HP All-in-One

Connect to additional computers on a network
You can connect the HP All-in-One to more than one computer on a small network of
computers. If the HP All-in-One is already connected to a computer on a network, for
each additional computer you must install the HP All-in-One software. During installation
of a wireless connection, the software will discover the SSID (network name) of the
existing network. Once you have set up the HP All-in-One on the network you will not
need to configure it again when you add additional computers.
NOTE: You can connect the HP All-in-One to either a wireless or wired network, but
not both at the same time.
Related topics
“Install the software for a network connection” on page 46

Change the HP All-in-One from a USB connection to a network connection
If you first install the HP All-in-One with a USB connection, you can later change to either
a wireless or Ethernet network connection. If you already understand how to connect to
a network, you can use the general directions below.
NOTE: For optimal performance and security in your wireless network, use an
access point (such as a wireless router) to connect the HP All-in-One.
To change a USB connection to an integrated wireless WLAN 802.11 connection
1. Unplug the USB connection from the back of the HP All-in-One.
2. On the control panel of the HP All-in-One, press Setup.
3. Press until Network is highlighted, and then press OK.
Connect to a network

Finish setup

To install the Windows HP All-in-One software
1. Quit all applications running on your computer, including any virus detection software.
2. Insert the Windows CD that came with the HP All-in-One into the CD-ROM drive on
your computer and follow the onscreen instructions.
3. If a dialog box about firewalls appears, follow the instructions. If you see firewall popup messages, you must always accept or allow the pop-up messages.
4. On the Connection Type screen, select Through the network, and then click
Next.
The Searching screen appears as the Setup program searches for the HP All-in-One
on the network.
5. On the Printer Found screen, verify that the printer description is correct.
If more than one printer is found on the network, the Printers Found screen appears.
Select the HP All-in-One you want to connect.
6. Follow the prompts to install the software.
When you have finished installing the software, the HP All-in-One is ready for use.
7. If you disabled any virus detection software on your computer, make sure to enable
it again.
8. To test your network connection, go to your computer and print a self-test report to
the HP All-in-One.

Chapter 4

4. Press to highlight Wireless Setup Wizard, and then press OK.
This runs the Wireless Setup Wizard.
5. Install the software for a network connection, choose Add a Device, and then choose
Through the network.
6. When the installation is complete, open Printers and Faxes (or Printers) in the
Control Panel and delete the printers for the USB installation.
Finish setup

To change a USB connection to a wired (Ethernet) connection
1. Unplug the USB connection from the back of the HP All-in-One.
2. Connect an Ethernet cable from the Ethernet port on the back of the HP All-in-One
to an available Ethernet port on the router or switch.
3. Install the software for a network connection, choose Add a Device, and then choose
Through the network.
4. When the installation is complete, open Printers and Faxes (or Printers) in the
Control Panel and delete the printers from the previous USB installation.
For more detailed instructions on connecting the HP All-in-One to a network, see:
•
•
•

“Wired network setup” on page 37
“Integrated wireless WLAN 802.11 network setup” on page 39
“Wireless ad hoc network setup” on page 43

Manage your network settings
You can manage network settings for the HP All-in-One through the HP All-in-One control
panel. Additional advanced settings are available in the Embedded Web Server, a
configuration and status tool you access from your Web browser using an existing
network connection to the HP All-in-One.
This section contains the following topics:
•
•
•
•

Change basic network settings from the control panel
Change advanced network settings from the control panel settings
Use the Embedded Web Server
Network configuration page definitions

Change basic network settings from the control panel
The HP All-in-One control panel enables you to set up and manage a wireless connection
and to perform a variety of network management tasks. This includes viewing the network
settings, restoring the network defaults, turning the wireless radio on and off, and
changing the network settings.
This section contains the following topics:
•
•
•
•
•

Use the Wireless Setup Wizard
View and print network settings
Restore network defaults
Turn the wireless radio on and off
Print the wireless network test

Finish setting up the HP All-in-One

Use the Wireless Setup Wizard
The Wireless Setup Wizard provides an easy way to set up and manage a wireless
connection to the HP All-in-One.

Finish setup

To run the Wireless Setup Wizard
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
3. Press to highlight Wireless Setup Wizard, and then press OK.
This runs the Wireless Setup Wizard.
Related topics
• “Integrated wireless WLAN 802.11 network setup” on page 39
• “Wireless ad hoc network setup” on page 43
View and print network settings
You can display a summary of the network settings on the HP All-in-One control panel,
or you can print a more detailed configuration page. The network configuration page lists
all of the important network settings such as the IP address, link speed, DNS, and mDNS.
To view and print the network settings
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
The Network menu appears.
3. Press until View Network Settings is highlighted, and then press OK.
The View Network Settings menu appears.
4. Do one of the following:
• To display wired network settings, press until Display Wired Summary is
highlighted, and then press OK.
This displays a summary of the wired (Ethernet) network settings.
• To display wireless network settings, press until Display Wireless
Summary is highlighted, and then press OK.
This displays a summary of the wireless network settings.
• To print the network configuration page, press until Print Network
Configuration Page is highlighted, and then press OK.
This prints the network configuration page.
Related topics
“Network configuration page definitions” on page 53
Restore network defaults
You can reset the network settings to what they were when you purchased the HP All-inOne.
CAUTION: This will erase all wireless setup information that you have entered. In
order to restore this information, you will need to run the Wireless Setup Wizard again.

Connect to a network

Chapter 4

To restore network defaults
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
3. Press until Restore Network Defaults is highlighted, and then press OK.
4. Press OK to confirm that you want to restore the network defaults.
Turn the wireless radio on and off
Finish setup

The wireless radio is off by default. In order to stay connected to a wireless network, the
radio must stay on. When the radio is on, the blue light on the front of the HP All-in-One
is lit. However, if the HP All-in-One is connected to a wired network or you have a USB
connection, the radio is not used. In this case you might want to turn the radio off.
To turn the wireless radio on and off
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
3. Press until Wireless Radio is highlighted, and then press OK.
4. Press to highlight On or Off, and then press OK.
Print the wireless network test
The wireless network test performs a series of diagnostic tests to determine whether
network setup is successful. The wireless network test prints automatically when the
Wireless Setup Wizard is run. You also can print the wireless network test at any time.
To print the wireless test report
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
3. Press until Wireless Network Test is highlighted, and then press OK.
The Wireless Network Test prints.
Related topics
“Network troubleshooting” on page 183
Change advanced network settings from the control panel settings
The advanced network settings are provided for your convenience. However, unless you
are an advanced user, you should not change any of these settings.
This section contains the following topics:
•
•

Set link speed
Change IP settings

Set link speed
You can change the speed at which data is transmitted over the network. The default is
Automatic.

Finish setting up the HP All-in-One

Change IP settings
The default setting for the IP settings is Automatic, which sets the IP settings
automatically. However, if you are an advanced user, you might want to manually change
the IP address, subnet mask, or the default gateway. To see the IP address and subnet
mask of the HP All-in-One, print a network configuration page from the HP All-in-One.
NOTE: When manually entering an IP Setting, you must already be connected to an
active Network, otherwise the setting will not stay when you exit from the menu.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid
IP address during the installation, your network components will not be able to connect
with the HP All-in-One.
To change IP settings
1. Press Setup.
2. Press until Network is highlighted, then press OK.
The Network menu appears.
3. Press until Advanced Setup is highlighted, and then press OK.
4. Press until IP Settings is highlighted, and then press OK.
If the HP All-in-One is already connected to a wired network, you are prompted to
confirm that you want to change the IP settings. Press OK.
5. Press until Manual is highlighted, and then press OK.
6. Press to highlight one of the following IP settings, and then press OK.
• IP Address
• Subnet Mask
• Default Gateway
7. Enter your changes, and then press OK to confirm the setting.
Related topics
• “View and print network settings” on page 49
• “Network configuration page definitions” on page 53

Connect to a network

Finish setup

To set link speed
1. Press Setup.
2. Press until Network is highlighted, then press OK.
The Network menu appears.
3. Press until Advanced Setup is highlighted, and then press OK.
Press until Set Link Speed is highlighted, and then press OK.
4. Press to select the link speed that matches your network hardware, and then press
OK to confirm the setting.
• Automatic
• 10-Full
• 10-Half
• 100-Full
• 100-Half

Chapter 4

Use the Embedded Web Server
If your computer is connected to an HP All-in-One on a network, you can access the
Embedded Web Server that resides in the HP All-in-One. The Embedded Web Server is
a web-based user interface that provides some options not available on the HP All-inOne control panel, including Webscan, a feature that lets you scan photos and documents
from the HP All-in-One to your computer using a Web browser, and advanced network
security options. Also, the Embedded Web Server enables you to monitor status and
order printer supplies.
Finish setup

For information on how to use the features available in the Embedded Web Server,
including Webscan, see the onscreen help within the Embedded Web Server. To access
Embedded Web Server help, open the Embedded Web Server, then click the Help link
under Other Links on the Embedded Web Server Home tab.
NOTE: Use the Embedded Web Server to change network settings not available on
the control panel.
This section contains the following topics:
•
•

Access the Embedded Web Server
Use the Embedded Web Server setup wizard

Access the Embedded Web Server
The computer you use to access the Embedded Web Server on the HP All-in-One must
be connected to the same network as the HP All-in-One.
To access the Embedded Web Server
1. Print a network configuration page to find the IP address for the HP All-in-One.
2. In the Address box in your Web browser on your computer, type the IP address of
the HP All-in-One, as shown on the network settings page. For example, http://
192.168.1.101.
The Embedded Web Server Home page appears, showing information for the HP Allin-One.
NOTE: If you are using a proxy server in your browser, you might need to disable
it to access the Embedded Web Server.
3. If you need to change the language displayed in the Embedded Web Server, do the
following:
a. Click the Settings tab.
b. Click Select Language in the Settings navigation menu.
c. In the Select Language list, click the appropriate language.
d. Click Apply.
4. Click the Home tab to access device and network information, or click the
Networking tab to access more network information or to modify network information.
5. Make any configuration changes.
6. Close the Embedded Web Server.
Related topics
“View and print network settings” on page 49
52

Finish setting up the HP All-in-One

Use the Embedded Web Server setup wizard

To access the Embedded Web Server setup wizard
1. Print a network configuration page to find the IP address for the HP All-in-One.
2. In the Address box in your Web browser on your computer, type the IP address of
the HP All-in-One, as shown on the network settings page. For example, http://
192.168.1.101.
The Embedded Web Server Home page appears, showing information for the HP Allin-One.
NOTE: If you are using a proxy server in your browser, you might need to disable
it to access the Embedded Web Server.
3. Click the Networking tab.
4. Click Wired (802.3) or Wireless (802.11) in the Connections navigation menu.
5. Click Start Wizard, and then follow all of the wizard instructions.
Related topics
“View and print network settings” on page 49
Network configuration page definitions
The network configuration page shows the network settings for the HP All-in-One. There
are settings for general information, 802.3 wired (Ethernet), 802.11 wireless, and
Bluetooth®.
This section contains the following topics:
•
•
•
•

General network settings
Wired (802.3) network settings
Wireless (802.11) network settings
Bluetooth settings

Related topics
• “View and print network settings” on page 49
• “Network glossary” on page 59

Connect to a network

Finish setup

The network setup wizard provided in the Embedded Web Server gives you an intuitive
interface to your network connection parameters.

Chapter 4

General network settings
The following table describes the general network settings shown on the network
configuration page.
Parameter

Description

Network Status

Status of the HP All-in-One:

Finish setup

•
•
Active connection
type

Offline: The HP All-in-One is not currently connected to the network.

Network mode of the HP All-in-One:

•
•
•

URL

Ready: The HP All-in-One is ready to receive or transmit data.

Wired: The HP All-in-One is connected by Ethernet cable to an IEEE
802.3 network.
Wireless: The HP All-in-One is connected to a wireless (802.11) network.
None: There is no network connection.

The IP address of the Embedded Web Server.
NOTE: You will need to know this URL when you try to access the
Embedded Web Server.

Firmware
Revision

The internal networking component and device firmware revision code.

Hostname

The TCP/IP name assigned by the installation software to the device. By
default, this is the letters HP followed by the last 6 digits of the Media Access
Control (MAC) address.

Admin Password

Status of the administrator's password for the Embedded Web Server:

NOTE: If you call HP Support, depending on the problem, you might be
asked to provide the firmware revision code.

•
•
mDNS

Set: Password is specified. You must enter the password to make
changes to the Embedded Web Server parameters.
Not Set: No password is set. A password is not required for making
changes to the Embedded Web Server parameters.

Some local and ad hoc networks do not use central DNS servers. They use
a DNS alternative called mDNS.
With mDNS, your computer can find and use any HP All-in-One connected
to your local area network. It can also work with any other Ethernet-enabled
device that appears on the network.

Wired (802.3) network settings
The following table describes the 802.3 wired settings shown on the network configuration
page.

Parameter

Description

Hardware
Address (MAC)

Finish setting up the HP All-in-One

(continued)
Parameter

Description
NOTE: Some Internet service providers (ISPs) require that you register the
MAC address of the Network Card or LAN Adapter that was connected to
your cable or DSL modem during installation.
This address uniquely identifies the device on the network. IP addresses are
assigned dynamically through DHCP or AutoIP. You can also set up a static
IP address, though this is not recommended.
CAUTION: Be careful when manually assigning an IP address. An invalid
IP address during installation will prevent your network components from
seeing the HP All-in-One.

Subnet Mask

A subnet is an IP address assigned by the installation software to make an
additional network available as part of a larger network. Subnets are specified
by a subnet mask. This mask determines which of the HP All-in-One IP
address bits identify the network and subnet, and which bits identify the device
itself.
NOTE: It is recommended that the HP All-in-One and the computers that
use it all reside on the same subnet.

Default Gateway

A node on a network that serves as an entrance to another network. A node
in this instance can be a computer or some other device.
NOTE: The address of the default gateway is assigned by the installation
software, unless you have already set a manual ip address.

Configuration
Source

The protocol used to assign the IP address to the HP All-in-One:

•
•
•
•

DNS server

AutoIP: The installation software automatically determines the
configuration parameters.
DHCP: The configuration parameters are supplied by a dynamic host
configuration protocol (DHCP) server on the network. On small networks,
this could be a router.
Manual: The configuration parameters are set manually, such as a static
IP address.
Not Specified: The mode used when the HP All-in-One is initializing.

The IP address of the domain name service (DNS) for the network. When you
use the web or send an e-mail message, you use a domain name to do it. For
example, the URL http://www.hp.com contains the domain name hp.com. The
DNS on the Internet translates the domain name into an IP address. Devices
use the IP addresses to refer to one another.

•
•

IP Address: The IP address of the domain name server.
Not Specified: The IP address is not specified, or the device is initializing.

NOTE: Check to see if a DNS IP address appears on the network
configuration page. If no address is shown, obtain the DNS IP address from
your Internet service provider (ISP).
Link
Configuration

The speed at which data is transmitted over a network. Speeds include 10TXFull, 10TX-Half, 100TX-Full, and 100TX-Half. When set to None, networking
is disabled.

Total Packets
transmitted

The number of packets transmitted by the HP All-in-One without error since
it has been turned on. The counter clears after the HP All-in-One is turned
off. When a message is transmitted over a packet-switching network, it is

Connect to a network

Finish setup

IP Address

Chapter 4
(continued)
Parameter

Description
broken up into packets. Each packet contains the destination address as well
as the data.

Total Packets
received

The number of packets received by the HP All-in-One without error since it
has been turned on. The counter clears after the HP All-in-One is turned off.

Finish setup

Wireless (802.11) network settings
The following table describes the 802.11 wireless settings shown on the network
configuration page.
Parameter

Description

Hardware
Address (MAC)

The Media Access Control (MAC) address that identifies the HP All-in-One.
This is a unique 12-digit identification number assigned to networking
hardware for identification, including wireless access points, routers, and
other such devices. No two pieces of hardware have the same MAC address.
Two MAC addresses are assigned: one for wired Ethernet and one for
wireless 802.11.
NOTE: Some Internet service providers (ISPs) require that you register the
MAC address of the Network Card or LAN Adapter that was connected to
your cable or DSL modem during installation.

IP Address

This address uniquely identifies the device on the network. IP addresses are
assigned dynamically through DHCP or AutoIP. You can also set up a static
IP address, though this is not recommended.
NOTE: Manually assigning an invalid IP address during installation will
prevent your network components from seeing the HP All-in-One.

Subnet Mask

Default Gateway

Configuration
Source

The protocol used to assign the IP address to the HP All-in-One:

•
•
•
•

Finish setting up the HP All-in-One

(continued)
Parameter

Description

DNS server

The IP address of the domain name service (DNS) for the network. When you
use the Web or send an e-mail message, you use a domain name to do it.
For example, the URL http://www.hp.com contains the domain name hp.com.
The DNS on the Internet translates the domain name into an IP address.
Devices use the IP addresses to refer to one another.
IP Address: The IP address of the domain name server.
Not Specified: The IP address is not specified, or the device is initializing.

NOTE: Check to see if a DNS IP address appears on the network
configuration page. If no address is shown, obtain the DNS IP address from
your Internet service provider (ISP).
Wireless Status

Status of the wireless network:

•
•

•
•
Communication
Mode

Connected: The HP All-in-One is connected to a wireless LAN and
everything is working.
Disconnected: The HP All-in-One is not connected to the wireless LAN
due to incorrect settings (such as the wrong WEP key), the HP All-in-One
is out of range, or an Ethernet cable is plugged in and connected to an
active network.
Disabled: The radio is turned off.
Not applicable: This parameter does not apply to this network type.

An IEEE 802.11 networking framework in which devices or stations
communicate with each other:

•
•
•

Infrastructure: The HP All-in-One communicates with other network
devices through a wireless access point, such as a wireless router or
base station.
Ad hoc: The HP All-in-One communicates directly with each device on
the network. No wireless router or access point is used. This is also called
a peer-to-peer network.
Not applicable: This parameter does not apply to this network type.

Network Name
(SSID)

Service Set Identifier. A unique identifier (up to 32 characters) that
differentiates one wireless local area network (WLAN) from another. The
SSID is also referred to as the network name. This is the name of the network
to which the HP All-in-One is connected.

Signal Strength
(1-5)

The transmitting or return signal graded on a scale of 1 to 5:

Channel

•
•
•
•
•
•
•

5: Excellent
4: Good
3: Fair
2: Poor
1: Marginal
No signal: No signal detected on the network.
Not applicable: This parameter does not apply to this network type.

The channel number currently being used for wireless communication. This
depends on the network in use, and might differ from the requested channel

Connect to a network

Finish setup

•
•

Chapter 4
(continued)
Parameter

Description
number. Value is from 1 to 14; countries/regions might limit the range of
approved channels.

•
•
•

(number): Value ranging from 1 to 14, depending on country/region.
None: No channel is in use.
Not Applicable: The WLAN is disabled or this parameter does not apply
to this network type.

Finish setup

NOTE: In ad hoc mode, if you are not able to receive or transmit data
between your computer and the HP All-in-One, make sure that you are using
the same communication channel on your computer and the HP All-in-One.
In infrastructure mode, the channel is dictated by the access point.
Authentication
type

Type of authentication in use:

•
•
•
•
•

None: No authentication in use.
Open System (ad hoc and infrastructure): No authentication
Shared Key: WEP key is required.
WPA-PSK (infrastructure only): WPA with Pre-Shared Key.
Not applicable: This parameter does not apply to this network type.

Authentication verifies the identity of a user or device before granting access
to the network, making it more difficult for unauthorized users to access
network resources. This security method is common on wireless networks.
A network using Open System authentication does not screen network users
based on their identities. Any wireless user can have access from the network.
However, such a network might use WEP (Wired Equivalent Privacy)
encryption to provide a first level of security against casual eavesdroppers.
A network using Shared Key authentication provides increased security by
requiring users or devices to identify themselves with a static key (a
hexadecimal or alphanumeric string). Every user or device on the network
shares the same key. WEP encryption is used along with shared key
authentication, using the same key for both authentication and encryption.
A network using server-based (WPA-PSK) authentication provides
significantly stronger security, and is supported in most wireless access
points and wireless routers. The access point or router verifies the identity of
a user or device requesting access to the network before granting that access.
Several different authentication protocols might be used on an authentication
server.
Encryption

The type of encryption in use on the network:

•
•
•
•
•
•
•

None: No encryption is in use.
64-bit WEP: A 5-character or 10-hex-digit WEP key is in use.
128-bit WEP: A 13-character or 26-hex-digit WEP key is in use.
WPA-AES: Advanced Encryption Standard encryption is in use. This is
an encryption algorithm for securing sensitive but unclassified material
by US Government agencies.
WPA-TKIP: Temporal Key Integrity Protocol, an advanced encryption
protocol, is in use.
Automatic: AES or TKIP is in use.
Not applicable: This parameter does not apply to this network type.

WEP aims to provide security by encrypting data over radio waves so that it
is protected as it is transmitted from one end point to another. This security
method is common on wireless networks.

Finish setting up the HP All-in-One

(continued)
Parameter

Description

Access Point HW
Address

The hardware address of the wireless router or access point on the network
to which the HP All-in-One is connected:

•

(MAC address): The unique MAC (Media Access Control) hardware
address of the access point.
Not applicable: This parameter does not apply to this network type.

Total Packets
transmitted

Total Packets
received

The number of packets received by the HP All-in-One without error since it
has been turned on. The counter clears after the HP All-in-One is turned off.

Bluetooth settings
The following table describes the Bluetooth settings shown on the network configuration
page.
Parameter

Description

Device Address

The hardware address of the Bluetooth device.

Device Name

The device name assigned to the printer, which can identify it on a Bluetooth
device.

Passkey

A value that the user must enter in order to print via Bluetooth.

Visibility

Shows whether or not the HP All-in-One is visible to Bluetooth devices that
are within range.

•
•
Security

Visible to all: Any Bluetooth device within range can print to the HP Allin-One.
Not visible: Only Bluetooth devices that have stored the device address
of the HP All-in-One can print to it.

The level of security set for an HP All-in-One connected by Bluetooth.

•
•

Low: The HP All-in-One does not require a passkey. Any Bluetooth
device within range can print to it.
High: The HP All-in-One requires a passkey from the Bluetooth device
before allowing the device to send a print job.

Network glossary
access point

A network router that has wireless capability.

ASCII

American Standard Code for Information Interchange. The standard for
numbers used by computers to represent all the uppercase and lowercase
Latin letters, numbers, punctuation, etc.

AutoIP

A feature of the installation software, which determines the configuration
parameters of devices on the network.

Connect to a network

Finish setup

•

Chapter 4
(continued)

Finish setup
60

DHCP

Dynamic Host Configuration Protocol. A server on the network that supplies
configuration parameters to devices on the network. On small networks, this
could be a router.

DNS

Domain Name Service. When you use the Web or send an e-mail message,
you use a domain name to do it. For example, the URL http://www.hp.com
contains the domain name hp.com. The DNS on the Internet translates the
domain name into an IP address. Devices use the IP addresses to refer to
one another.

DNS-SD

See DNS. The SD portion stands for Service Discovery. This is part of a
protocol developed by Apple that enables automatic discovery of computers,
devices, and services on IP networks.

DSL

Digital Subscriber Line. A high-speed connection to the Internet.

Ethernet

The most common local network technology that connects computers using
copper cabling.

Ethernet cable

The cable used to connect network elements in a wired network. The CAT-5
Ethernet cable is also known as a straight-through cable. When using an
Ethernet cable, the network elements must be attached to a router. An
Ethernet cable uses an RJ-45 connector.

EWS

Embedded Web Server. A browser-based utility that provides a simple way
to manage the HP All-in-One. You can monitor status, configure HP All-inOne networking parameters, or access HP All-in-One features.

Gateway

A computer or other device, such as a router, that serves as an entrance to
the Internet or another network.

HEX

Hexadecimal. The base 16 numbering system, which uses the digits 0-9 plus
the letters A-F.

host computer

The computer at the center of a network.

Hostname

The TCP/IP name assigned by the installation software to the device. By
default, this is the letters HP followed by the last 6 digits of the Media Access
Control (MAC) address.

hub

No longer commonly used in modern home networks, a hub takes its signal
from each computer and sends it to all of the other computers connected to
the hub. Hubs are passive; other devices on the network plug into the hub in
order to communicate with one another. A hub does not manage the network.

IP address

A number that uniquely identifies the device on the network. IP addresses
are assigned dynamically through DHCP or AutoIP. You can also set up a
static IP address, though this is not recommended.

MAC address

Media Access Control (MAC) address that uniquely identifies the HP All-inOne. This is a unique 12-digit identification number assigned to networking
hardware for identification. No two pieces of hardware have the same MAC
address.

network name

The SSID or network name identifies a wireless network.

NIC

Network Interface Card. A card on your computer that provides an Ethernet
connection so that you can connect your computer to a network.

RJ-45 connector

The connector on the ends of an Ethernet cable. Although standard Ethernet
cable connectors (RJ-45 connectors) look similar to standard telephone
cable connectors, they are not interchangeable. An RJ-45 connector is wider
and thicker and always has 8 contacts on the end. A phone connector has
between 2 and 6 contacts.

Finish setting up the HP All-in-One

router

A router provides a bridge between two or more networks. A router can link
a network to the Internet, link two networks and connect both to the Internet,
and help secure networks through the use of firewalls and assigning dynamic
addresses. A router can also act as a gateway, while a switch cannot.

SSID

The SSID or network name identifies a wireless network.

switch

A switch makes it possible for several users to send information over a
network at the same time without slowing each other down. Switches allow
different nodes (a network connection point, typically a computer) of a
network to communicate directly with one another.

WEP

Wired Equivalent Privacy (WEP) is a type of encryption used for wireless
network security.

WPA

Wi-Fi Protected Access (WPA) is a type of encryption used for wireless
network security. WPA offers greater security than WEP.

Fax setup
After completing all the steps in the Setup Guide, use the instructions in this section to
complete your fax setup. Please keep your Setup Guide for later use.
In this section, you will learn how to set up the HP All-in-One so that faxing works
successfully with equipment and services you might already have on the same phone
line as the HP All-in-One.
NOTE: Refer to your printed documentation for complete step-by-step instructions
on setting up and configuring the HP All-in-One for faxing with other telephone or
office equipment and services.
For fax setup information in specific countries/regions, you can also see the Fax
Configuration Web site listed below.
Austria

www.hp.com/at/faxconfig

Germany

www.hp.com/de/faxconfig

Switzerland (French)

www.hp.com/ch/fr/faxconfig

Switzerland (German)

www.hp.com/ch/de/faxconfig

United Kingdom

www.hp.com/uk/faxconfig

Spain

www.hp.es/faxconfig

The Netherlands

www.hp.nl/faxconfig

Belgium (France)

www.hp.be/fr/faxconfig

Belgium (Dutch)

www.hp.be/nl/faxconfig

Portugal

www.hp.pt/faxconfig

Sweden

www.hp.se/faxconfig

Finland

www.hp.fi/faxconfig

Denmark

www.hp.dk/faxconfig

Fax setup

Finish setup

(continued)

Chapter 4
(continued)
Norway

www.hp.no/faxconfig

Ireland

www.hp.com/ie/faxconfig

France

www.hp.com/fr/faxconfig

Italy

www.hp.com/it/faxconfig

This section contains the following topics:
Finish setup

•
•
•
•

Change settings on the HP All-in-One to receive faxes
Test your fax setup
Set the fax header
Set up speed dialing

Related topics
“Use the fax features” on page 131

Change settings on the HP All-in-One to receive faxes
In order to receive faxes successfully, you might need to change some settings on the
HP All-in-One. If you are unsure which setting to choose for a specific fax option, refer to
the detailed fax setup instructions provided in the printed documentation.
This section contains the following topics:
•
•
•

Set the answer mode
Set the number of rings before answering
Change the answer ring pattern for distinctive ringing

Set the answer mode
The answer mode determines whether the HP All-in-One answers incoming calls or not.
•
•

Turn on the Auto Answer setting if you want the HP All-in-One to answer faxes
automatically. The HP All-in-One will answer all incoming calls and faxes.
Turn off the Auto Answer setting if you want to receive faxes manually. You must
be available to respond in person to the incoming fax call or the HP All-in-One will not
receive faxes.

To set the answer mode
▲ Press Auto Answer to turn the light on or off, as appropriate for your setup.
When the Auto Answer light is on, the HP All-in-One answers calls automatically.
When the light is off, the HP All-in-One does not answer calls.
Set the number of rings before answering
If you turn on the Auto Answer setting, you can specify how many rings should occur
before the HP All-in-One automatically answers the incoming call.
The Rings to Answer setting is important if you have an answering machine on the same
phone line as the HP All-in-One, because you want the answering machine to answer
the phone before the HP All-in-One does. The number of rings to answer for the HP Allin-One should be greater than the number of rings to answer for the answering machine.
62

Finish setting up the HP All-in-One

To set the number of rings before answering from the control panel
1. Press Setup.
2. Press to highlight Basic Fax Setup and press OK.
3. Press to highlight Rings to Answer and then press OK.
4. Enter the appropriate number of rings by using the keypad, or press or
the number of rings.
5. Press OK to accept the setting.

to change

Change the answer ring pattern for distinctive ringing
Many phone companies offer a distinctive ringing feature that allows you to have several
phone numbers on one phone line. When you subscribe to this service, each number will
have a different ring pattern. You can set up the HP All-in-One to answer incoming calls
that have a specific ring pattern.
If you connect the HP All-in-One to a line with distinctive ringing, have your telephone
company assign one ring pattern to voice calls and another ring pattern to fax calls. HP
recommends that you request double or triple rings for a fax number. When the HP Allin-One detects the specified ring pattern, it will answer the call and receive the fax.
If you do not have a distinctive ring service, use the default ring pattern, which is All
Rings.
To change the distinctive ring pattern from the control panel
1. Verify that the HP All-in-One is set to answer fax calls automatically.
2. Press Setup.
3. Press to highlight Distinctive Ring, and then press OK.
4. Press to highlight Advanced Fax Setup, and then press OK.
5. Press to highlight the appropriate option, and then press OK.
When the phone rings with the ring pattern assigned to your fax line, the HP All-inOne answers the call and receives the fax.

Test your fax setup
You can test your fax setup to check the status of the HP All-in-One and to make sure it
is set up properly for faxing. Perform this test after you have completed setting up the
HP All-in-One for faxing. The test does the following:
•
•
•
•

Tests the fax hardware
Verifies the correct type of phone cord is connected to the HP All-in-One
Checks that the phone cord is plugged into the correct port
Checks for a dial tone

Fax setup

Finish setup

For example, set your answering machine to a low number of rings and the HP All-in-One
to answer in the maximum number of rings. (The maximum number of rings varies by
country/region.) In this setup, the answering machine will answer the call and the HP Allin-One will monitor the line. If the HP All-in-One detects fax tones, the HP All-in-One will
receive the fax. If the call is a voice call, the answering machine will record the incoming
message.

Chapter 4

•
•

Checks for an active phone line
Tests the status of your phone line connection

The HP All-in-One prints a report with the results of the test. If the test fails, review the
report for information on how to fix the problem and rerun the test.

Finish setup

To test your fax setup from the control panel
1. Set up the HP All-in-One for faxing according to your particular home or office setup
instructions.
2. Insert the ink cartridges and load full-size paper in the input tray before starting the
test.
3. Press Setup.
4. Press to highlight Tools, and then press OK.
5. Press to highlight Run Fax Test, and then press OK.
The HP All-in-One displays the status of the test on the display and prints a report.
6. Review the report.
• If the test passes and you are still having problems faxing, check the fax settings
listed in the report to verify the settings are correct. A blank or incorrect fax setting
can cause problems faxing.
• If the test fails, review the report for more information on how to fix any problems
found.
7. After you pick up the fax report from the HP All-in-One, press OK.
If necessary, resolve any problems found and rerun the test.

Set the fax header
The fax header prints your name and fax number on the top of every fax you send. HP
recommends that you set up the fax header by using the software that you installed with
the HP All-in-One. You can also set up the fax header from the control panel, as described
here.
NOTE: In some countries/regions the fax header information is a legal requirement.
To set a default fax header from the control panel
1. Press Setup.
2. Press to highlight Basic Fax Setup and press OK.
3. Press to highlight Fax Header, and then press OK.
The visual keyboard appears on the display.
4. Use the visual keyboard to enter your personal or company name. When you are
finished, highlight Done on the visual keyboard, and then press OK.
5. Enter your fax number by using the numeric keypad, and then press OK.
Related topics
“Enter text using the visual keyboard” on page 19

Finish setting up the HP All-in-One

Set up speed dialing
You can assign speed dial entries to fax numbers you use often. This lets you dial those
numbers quickly by using the control panel.
•
•
•
•

Set up individual speed dial entries
Set up group speed dial entries
Delete speed dial entries
Print the speed dial list

Set up individual speed dial entries
You can create speed dial entries for fax numbers that you use frequently. If necessary,
you can also edit the name or fax number of a speed dial entry you have already created.
TIP: You can include individual speed dial entries in a group speed dial entry. This
enables you to send a fax to a group of people at one time. (The maximum number
of individual speed dial entries allowed in a group speed dial entry varies by model.)
This section contains the following topics:
•
•

Create individual speed dial entries
Update individual speed dial entries

Create individual speed dial entries
You can create speed dial entries from the control panel or from your computer by using
the software that you installed with the HP All-in-One.
To create speed dial entries from the control panel
1. Press Setup.
2. Press to highlight Speed Dial Setup, and then press OK.
3. Press to highlight Individual Speed Dial, and then press OK.
The first unassigned speed dial entry appears on the display.
4. Press OK to select the displayed speed dial entry. You can also press to highlight
a different unassigned entry, and then press OK.
5. Enter the fax number for the speed dial entry by using the numeric keypad, and then
press OK.
TIP: To add a pause in the fax number you are entering, press the Symbols
(*) button repeatedly until a dash (-) appears on the display.
The visual keyboard appears on the display.
6. Use the visual keyboard to enter the name. When you are finished, highlight Done
on the visual keyboard, and then press OK.
7. Press OK if you want to set up another number.
Related topics
“Enter text using the visual keyboard” on page 19

Fax setup

Finish setup

This section contains the following topics:

Chapter 4

Update individual speed dial entries
You can edit the name or fax number in a speed dial entry from the control panel or from
your computer by using the software that you installed with the HP All-in-One.

Finish setup

To update a speed dial entry from the control panel
1. Press Setup.
2. Press to highlight Speed Dial Setup, and then press OK.
3. Press to highlight Individual Speed Dial, and then press OK.
The first unassigned speed dial entry appears on the display.
4. Press or to scroll through the speed dial entries, and then press OK to select
the appropriate entry.
5. When the current fax number appears, press to erase it.
6. Enter the new fax number by using the numeric keypad, and then press OK.

TIP: To add a pause in the fax number you are entering, press the Symbols
(*) button repeatedly until a dash (-) appears on the display.
The visual keyboard appears on the display.
7. Use the visual keyboard to enter a new name. When you are finished, highlight
Done on the visual keyboard, and then press OK.
8. Press OK if you want to update another number.
Related topics
• “Text and symbols” on page 18
• “Enter text using the visual keyboard” on page 19
Set up group speed dial entries
You can place individual speed dial entries that you have set up into groups, so that you
can fax the same document to multiple recipients at once. (The maximum number of
individual speed dial entries allowed in a group speed dial entry varies by model.)
NOTE: The numbers you include in the group speed dial entry must already be set
up as individual speed dial entries on the HP All-in-One.

TIP: You can send a one time only fax to multiple recipients by using the Broadcast
Fax feature. The Broadcast Fax recipient list is not saved and only works for sending
faxes in black.
To create group speed dial entries from the control panel
1. Press Setup.
2. Press to highlight Speed Dial Setup, and then press OK.
3. Press to highlight Group Speed Dial, and then press OK.
The first unassigned speed dial entry appears on the display.
4. Press OK to select the displayed speed dial entry. You can also press
a different unassigned entry, and then press OK.

Finish setting up the HP All-in-One

to highlight

Related topics
• “Enter text using the visual keyboard” on page 19
• “Broadcast a fax to multiple recipients” on page 136
Delete speed dial entries
You can delete an individual or group speed dial entry. When deleting speed dial entries,
consider the following:
•
•

Deleting an individual speed dial entry also deletes that entry from any groups to
which you have assigned it.
Deleting a group speed dial entry does not delete the individual speed dial entries
associated with it. You can still use the individual speed dial entries to send faxes.

To delete speed dial entries from the control panel
1. Press Setup.
2. Press to highlight Speed Dial Setup, and then press OK.
3. Press to highlight Delete Speed Dial, and then press OK.
4. Press to highlight the speed dial entry that you want to delete, and then press
OK.
Print the speed dial list
You can print a list of all the speed dial entries that you programmed on the HP All-inOne.
To print the speed dial list
1. Press Setup.
2. Press to highlight Speed Dial Setup, and then press OK.
3. Press to highlight Print Speed Dial List, and then press OK.
TIP: You can also print this list by selecting Speed Dial List from the Print
Report menu.

Fax setup

Finish setup

5. Press or to scroll through the individual speed dial entries you set up, and then
press OK to select the appropriate entry. Repeat this step for each number you want
to add to the group speed dial.
6. When you are done, press to highlight Done Selecting, and then press OK.
The visual keyboard appears on the display.
7. Use the visual keyboard to enter a name for the group speed dial. When you are
finished, highlight Done on the visual keyboard, and then press OK.
8. Press OK to add another group.

Chapter 4

Finish setup
68

Finish setting up the HP All-in-One

How do I?
This section contains links to commonly performed tasks, such as printing photos,
scanning, making copies, and faxing.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

“How do I print 10 x 15 cm (4 x 6) inch borderless photos from a memory card?”
on page 104
“How do I make reprints of a photo in a variety of sizes?” on page 115
“How do I make a black-and-white or color copy of a document?” on page 121
“How do I print 13 x 18 cm (5 x 7) inch or larger size photos from a memory card?”
on page 104
“How do I save photos to my computer?” on page 108
“How do I share my photos with family and friends?” on page 107
“How do I scan a photo or document to the computer?” on page 117
“How do I print on both sides of the paper?” on page 93
“How do I print wide-rule notebook paper and graph paper for my child's homework
project?” on page 153
“How do I test my fax setup?” on page 63
“How do I send a basic fax?” on page 131
“How do I manually send a fax?” on page 133
“How do I use a credit card when sending a fax?” on page 134
“How do I broadcast a fax to multiple recipients?” on page 136
“How do I manually receive a fax?” on page 140
“How do I print a fax confirmation report?” on page 150

How do I?

Chapter 5

How do I?
70

How do I?

Load originals and load paper
You can load many different types and sizes of paper in the HP All-in-One, including letter
or A4 paper, legal paper, photo paper, transparencies, envelopes, and HP CD/DVD tattoo
labels. By default, the HP All-in-One is set to detect the size and type of paper you load
in the input tray automatically and then adjust its settings to generate the highest quality
output for that paper.
If you are using special papers, such as photo paper, transparency film, envelopes, or
labels, or if you experience poor print quality using the automatically-adjusted settings,
you can manually set the paper size and type for print and copy jobs.
This section contains the following topics:
•
•
•
•

Load originals
Choose papers for printing and copying
Load paper
Avoid paper jams

Load originals
You can load an original for a copy, fax, or scan job in the automatic document feeder or
on the glass. Originals that are loaded in the automatic document feeder will automatically
be fed into the HP All-in-One.
•
•

Load an original in the automatic document feeder
Load an original on the glass

Load an original in the automatic document feeder
You can copy, scan, or fax a single- or multiple-page letter-, A4-, or legal-size document
by placing it in the document feeder tray.
The automatic document feeder holds up to 50 sheets of letter or A4 paper, or 35 sheets
of legal paper.

NOTE: Some features, such as the Fit to Page copy feature, do not work when you
load your originals in the automatic document feeder. You must load your originals
on the glass.
CAUTION: Do not load photos in the automatic document feeder; this might cause
damage to your photos.

Load originals and load paper

This section contains the following topics:

Chapter 6

To load an original in the document feeder tray
1. Load your original, with the print side up, into the document feeder tray. Slide the
paper into the automatic document feeder until you hear a beep or see a message
on the display indicating that the HP All-in-One detected the pages you loaded.
If you are loading legal paper, flip open the feeder tray extender before loading the
paper.

TIP: For more help on loading originals in the automatic document feeder, refer
to the diagram engraved in the document feeder tray.

2. Slide the paper guides inward until they stop at the left and right edges of the paper.
NOTE: Remove all originals from the document feeder tray before lifting the lid on
the HP All-in-One.

Load an original on the glass
Load originals and load paper

You can copy, scan, or fax up to letter- or A4-size originals by loading them on the glass.
If your original is legal-size or contains multiple full-size pages, load it in the automatic
document feeder.
NOTE: Many of the special features will not work correctly if the glass and lid backing
are not clean.

To load an original on the glass
1. Remove all originals from the document feeder tray, and then lift the lid on the HP Allin-One.
2. Load your original print side down on the right front corner of the glass.

TIP: For more help on loading an original, refer to the engraved guides along the
edge of the glass.

Load originals and load paper

3. Close the lid.

Choose papers for printing and copying
You can use different types and sizes of paper in the HP All-in-One. Review the following
recommendations to get the best printing and copying quality. Whenever you change
paper types or sizes, remember to change those settings.
This section contains the following topics:
•
•
•

Recommended papers for printing and copying
Recommended papers for printing only
Papers to avoid

Recommended papers for printing and copying

HP Premium Plus Photo Paper
HP Premium Plus Photo Papers are the best HP photo paper, with image quality and
fade resistance superior to store-processed photos. They are ideal for printing your highresolution images for framing or including in a photo album. These papers are available
in several sizes, including 10 x 15 cm (4 x 6 inch) (with or without tabs), A4, and 8.5 x 11
inch sizes for printing or copying photos from the HP All-in-One.
HP Premium Photo Paper
HP Premium Photo Papers are high-quality, glossy-finish or soft gloss-finish photo
papers. They look and feel like store-processed photos and can be mounted under glass
or in an album. These papers are available in several sizes, including 10 x 15 cm (4 x 6
inch) (with or without tabs), A4, and 8.5 x 11 inch sizes for printing or copying photos from
the HP All-in-One.
HP Advanced Photo Paper or HP Photo Paper
HP Advanced Photo Paper or HP Photo Paper is a sturdy, glossy photo paper that
features an instant-dry finish for easy handling without smudging. It resists water, smears,
fingerprints, and humidity. Your prints have a look and feel comparable to a storeprocessed photo. It is available in several sizes, including A4, 8.5 x 11 inch, and 10 x 15
cm (4 x 6 inch) (with or without tabs) for printing or copying photos from the HP All-in-

Choose papers for printing and copying

Load originals and load paper

If you want the best print quality, HP recommends using HP papers that are specifically
designed for the type of project you are printing. If you are printing photos, for example,
load HP Premium or HP Premium Plus photo paper in the input tray.

Chapter 6

One. HP Advanced Photo Paper is marked on the nonprinting corners with the following
symbol.

HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet Transparency
Film
HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet Transparency Film
make your color presentations vivid and even more impressive. This film is easy to use
and handle and dries quickly without smudging.
HP Premium Inkjet Paper
HP Premium Inkjet Paper is the ultimate coated paper for high-resolution usage. A
smooth, matte finish makes it ideal for your highest-quality documents.
HP Bright White Inkjet Paper
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque
enough for two-sided color usage with no show-through, which makes it ideal for
newsletters, reports, and flyers.

Load originals and load paper

HP All-in-One Paper or HP Printing Paper
• HP All-in-One Paper is specifically designed for HP All-in-One devices. It has an extra
bright blue-white shade that produces sharper text and richer colors than ordinary
multifunction papers.
• HP Printing Paper is a high-quality multifunction paper. It produces documents that
look and feel more substantial than documents printed on standard multipurpose or
copy paper.
To order genuine HP supplies for the HP All-in-One, go to www.hp.com/buy/supplies. If
prompted, choose your country/region, follow the prompts to select your product, and
then click one of the shopping links on the page.

Recommended papers for printing only
Certain papers are supported only when you start the print job from your computer. The
following list provides information about these papers.
If you want the best print quality, HP recommends using HP papers. Using paper that is
too thin or too thick, paper that has a slick texture, or paper that stretches easily can cause
paper jams. Using paper that has a heavy texture or does not accept ink can cause printed
images to smear, bleed, or not fill in completely.
Depending on your country/region, some of these papers might not be available.
HP Iron-On Transfers
HP Iron-On Transfers (for color fabrics or for light or white fabrics) are the ideal solution
for creating custom T-shirts from your digital photos.

Load originals and load paper

HP Premium Photo Cards
HP Premium Photo Cards enable you to make your own greeting cards.
HP Brochure & Flyer Paper
HP Brochure & Flyer Paper (Gloss or Matte) is glossy-coated or matte-coated on both
sides for two-sided use. They are the perfect choice for near-photographic reproductions
and business graphics for report covers, special presentations, brochures, mailers, and
calendars.
HP Premium Presentation Paper
HP Premium Presentation Paper gives your presentation a quality look and feel.
HP CD/DVD Tattoos
HP CD/DVD Tattoos allow you to personalize your CDs and DVDs by printing highquality, low-cost CD or DVD labels.
To order genuine HP supplies for the HP All-in-One, go to www.hp.com/buy/supplies. If
prompted, choose your country/region, follow the prompts to select your product, and
then click one of the shopping links on the page.

Papers to avoid

Papers to avoid for all print and copy jobs
• Any size paper other than those listed in the HP All-in-One printer software.
• Paper with cutouts or perforations (unless specifically designed for use with HP inkjet
devices).
• Highly textured stock, such as linen. It might not print evenly, and the ink can bleed
into these papers.
• Extremely smooth, shiny, or coated papers not specifically designed for the HP Allin-One. They can jam the HP All-in-One or repel the ink.
• Multi-part forms, such as duplicate and triplicate forms. They can wrinkle or get stuck,
and the ink is more likely to smear.
• Envelopes with clasps or windows. They can get stuck in the rollers and cause paper
jams.
• Banner paper.
Additional papers to avoid when copying
• Envelopes.
• Transparency film other than HP Premium Inkjet Transparency Film or HP Premium
Plus Inkjet Transparency Film.
• Iron-On Transfers.
• Greeting card paper.

Choose papers for printing and copying

Load originals and load paper

Using paper that is too thin or too thick, paper that has a slick texture, or paper that
stretches easily can cause paper jams. Using paper that has a heavy texture or does not
accept ink can cause printed images to smear, bleed, or not fill in completely.

Chapter 6

•
•

Inkjet labels.
HP CD/DVD tattoo labels.

Load paper
This section describes the procedure for loading different types and sizes of paper into
the HP All-in-One for your copies or printouts.

TIP: To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in
a resealable bag. If the paper is not stored properly, extreme changes in temperature
and humidity might result in curled paper that does not work well in the HP All-in-One.
This section contains the following topics:
•
•
•
•
•

Load full-size paper
Load 10 x 15 cm (4 x 6 inch) photo paper
Load postcards, Hagaki, or index cards
Load envelopes
Load other types of paper

Load full-size paper
You can load many types of letter, A4, or legal paper into the main input tray of the HP Allin-One.

Load originals and load paper

To load full-size paper
1. Pull out the main input tray, and then slide the paper-width and paper-length guides
to their outermost positions.

2. Tap a stack of paper on a flat surface to align the edges, and then check the paper
for the following:
• Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
• Make sure all the paper in the stack is the same size and type.

Load originals and load paper

3. Insert the stack of paper into the main input tray with the short edge forward and the
print side down. Slide the stack of paper forward until it stops.

CAUTION: Make sure that the HP All-in-One is idle and silent when you load
paper into the main input tray. If the HP All-in-One is servicing the ink cartridges
or otherwise engaged in a task, the paper stop inside the device might not be in
place. You could push the paper too far forward, causing the HP All-in-One to
eject blank pages.
TIP: If you are using letterhead, insert the top of the page first with the print side
down. For more help on loading full-size paper and letterhead, refer to the diagram
engraved in the base of the main input tray.

Load originals and load paper

4. Slide the paper-width and paper-length guides inward until they stop at the edges of
the paper.
Do not overload the main input tray; make sure the stack of paper fits within the main
input tray and is no higher than the top of the paper-width guide.

Load paper

Chapter 6

5. Push the main input tray back into the HP All-in-One.
6. Pull the output tray extender toward you, as far as it will go.

NOTE: When you use legal-size paper, leave the tray extender closed.
Related topics
• “Recommended papers for printing and copying” on page 73
• “Change the print settings for the current job” on page 84

Load 10 x 15 cm (4 x 6 inch) photo paper
You can load up to 10 x 15 cm (4 x 6 inch) photo paper into the photo tray of the HP Allin-One. For the best results, use 10 x 15 cm (4 x 6 inch) HP Premium Plus Photo
Paper or HP Premium Photo Paper.

Load originals and load paper

To load 10 x 15 cm (4 x 6 inch) photo paper in the photo tray
1. Raise the output tray, and then pull out the photo tray.

2. Insert the stack of photo paper into the photo tray with the short edge forward and the
glossy side down. Slide the stack of photo paper forward until it stops.
If the photo paper you are using has perforated tabs, load the photo paper so that the
tabs are closest to you.

Load originals and load paper

3. Slide the paper-length and paper-width guides inward against the stack of photo
paper until the guides stop.
Do not overload the photo tray; make sure the stack of photo paper fits within the
photo tray and is no higher than the top of the paper-width guide.

4. Push in the photo tray, and then lower the output tray.
Related topics
• “Recommended papers for printing only” on page 74
• “Print your photos” on page 104
• “Print a borderless image” on page 90
• “Print a photo on photo paper” on page 91

Load postcards, Hagaki, or index cards
You can load postcards, Hagaki, and index cards in the photo tray.
Load originals and load paper

For best results, set the paper type and paper size before copying or printing.
To load postcards, Hagaki or index cards in the photo tray
1. Raise the output tray, and then pull out the photo tray.

2. Insert the stack of cards into the photo tray with the short edge forward and the print
side down. Slide the stack forward until it stops.

Load paper

Chapter 6

3. Slide the paper-length and paper-width guides inward against the stack of cards until
the guides stop.
Do not overload the photo tray; make sure the stack of cards fits within the photo tray
and is no higher than the top of the paper-width guide.

4. Push in the photo tray, and then lower the output tray.
Related topics
“Change the print settings for the current job” on page 84

Load envelopes
You can load one or more envelopes into the main input tray of the HP All-in-One. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
NOTE: For specific details on how to format text for printing on envelopes, consult
the help files in your word processing software. For best results, consider using a label
for the return address on envelopes.
Load originals and load paper

To load envelopes
1. Pull out the main input tray to load envelopes.
2. Remove all paper from the main input tray.
3. Insert one or more envelopes into the far-right side of the main input tray, with the
envelope flaps on the left and facing up. Slide the stack of envelopes forward until it
stops.

Load originals and load paper

4. Slide the paper-width guide inward against the stack of envelopes until it stops.
Do not overload the main input tray; make sure the stack of envelopes fits within the
main input tray and is not higher than the top of the paper-width guide.
5. Push the main input tray back into the HP All-in-One.
6. Pull the output tray extender towards you, as far as it will go.
Related topics
“Change the print settings for the current job” on page 84

Load other types of paper
The following types of paper are designed for special projects. Create your project in the
HP Photosmart Software or another application, set the paper type and size, and then
print.
HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet Transparency
Film
▲ Insert the film so that the white transparency strip (with arrows and the HP logo) is on
top and is going into the input tray first.
NOTE: For best results, set the paper type to transparency film before printing
on transparency film.

TIP: To prevent curling, keep transfer sheets sealed in the original package until
you are ready to use them.
2. Locate the blue stripe on the nonprinting side of the transfer paper and then manually
feed one sheet at a time into the input tray with the blue stripe facing up.
HP Greeting Cards, HP Photo Greeting Cards, or HP Textured Greeting Cards
▲ Insert a small stack of HP greeting card paper into the input tray with the print side
down; slide the stack of cards forward until it stops.
TIP: Make sure the area on which you want to print is inserted first, print side
down in the input tray.
Inkjet labels
1. Always use letter or A4 label sheets designed for use with inkjet devices, and make
sure that the labels are no more than two years old. Labels on older sheets might
peel off when the paper is pulled through the HP All-in-One, causing subsequent
paper jams.
2. Fan the stack of labels to make sure none of the pages are sticking together.
3. Place a stack of label sheets on top of full-size plain paper in the input tray, label side
down. Do not insert labels one sheet at a time.
For best results, set the paper type and paper size before printing.
Load paper

Load originals and load paper

HP Iron-On Transfers
1. Flatten the transfer sheet completely before using it; do not load curled sheets.

Chapter 6

HP CD/DVD Tattoo labels
▲ Place one sheet of CD/DVD tattoo paper in the input tray with the print side down;
slide the CD/DVD tattoo paper forward until it stops.
NOTE: When you use CD/DVD tattoo labels, leave the tray extender closed.
Related topics
• “Change the print settings for the current job” on page 84
• “Recommended papers for printing only” on page 74

Avoid paper jams
To help avoid paper jams, follow these guidelines.
•
•

•
•
•

•
•
Load originals and load paper

•
•

Remove printed papers from the output tray frequently.
Do not leave originals on the glass. If you load an original in the automatic document
feeder while there is already an original on the glass, the original can jam in the
automatic document feeder.
Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.
Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
If you are printing labels, ensure that the label sheets are no more than two years old.
Labels on older sheets might peel off when the paper is pulled through the HP All-inOne, and cause paper jams.
Do not combine different paper types and paper sizes in the input tray; the entire stack
of paper in the input tray must be the same size and type.
Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure
the paper-width guide does not bend the paper in the input tray.
Do not force paper too far forward in the input tray.
Use paper types that are recommended for the HP All-in-One.

Related topics
• “Recommended papers for printing and copying” on page 73
• “Papers to avoid” on page 75
• “Clear paper jams” on page 171

Load originals and load paper

Print from your computer
The HP All-in-One can be used with any software application that allows printing. You
can print a range of projects, such as borderless images, newsletters, greeting cards,
iron-on transfers, and posters.
This section contains the following topics:
•
•
•
•
•
•
•

Print from a software application
Make the HP All-in-One the default printer
Change the print settings for the current job
Change the default print settings
Printing shortcuts
Perform special print jobs
Stop a print job

Print from a software application
Most print settings are automatically handled by the software application. You need to
change the settings manually only when you change print quality, print on specific types
of paper or transparency film, or use special features.
To print from a software application
1. Make sure you have paper loaded in the input tray.
2. On the File menu in your software application, click Print.
3. Select the HP All-in-One as the printer.
If you set the HP All-in-One as the default printer, you can skip this step. The HP Allin-One will already be selected.
4. If you need to change settings, click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
NOTE: When printing a photo, you must select options for the specific photo
paper and photo enhancement.
5. Select the appropriate options for your print job by using the features available in the
Advanced, Printing Shortcuts, Features, and Color tabs.
TIP: You can easily select the appropriate options for your print job by choosing
one of the predefined print tasks on the Printing Shortcuts tab. Click a type of
print task in the Printing Shortcuts list. The default settings for that type of print
task are set and summarized on the Printing Shortcuts tab. If necessary, you
can adjust the settings here and save your custom settings as a new printing
shortcut. To save a custom printing shortcut, select the shortcut and click Save
As. To delete a shortcut, select the shortcut and click Delete.

6. Click OK to close the Properties dialog box.
7. Click Print or OK to begin printing.

Print from your computer

Chapter 7

Make the HP All-in-One the default printer
You can set the HP All-in-One as the default printer to use from all software applications.
This means that the HP All-in-One is automatically selected in the printer list when you
select Print from the File menu in a software application. The default printer is
automatically selected when you click the Print button in the toolbar of most software
applications. For more information, see the Windows Help.

Change the print settings for the current job
You can customize the print settings of the HP All-in-One to handle nearly any print task.
This section contains the following topics:
•
•
•
•
•
•
•
•

Set the paper size
Set the paper type for printing
View the print resolution
Change the print speed or quality
Change the page orientation
Scale the document size
Change the saturation, brightness, or color tone
Preview your print job

Set the paper size
The Size setting helps the HP All-in-One determine the printable area on the page. Some
of the paper size choices have a borderless equivalent, which allows you to print to the
top, bottom, and side edges of the paper.
Usually, you set the paper size in the software application you used to create your
document or project. However, if you are using custom-size paper, or if you cannot set
the paper size from your software application, you can change the paper size in the
Properties dialog box before printing.
To set the paper size
1. Make sure you have paper loaded in the input tray.
2. On the File menu in your software application, click Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
5. Click the Features tab.
6. In the Resizing Options area, click the appropriate paper size from the Size list.
The following table lists the suggested paper size settings for the different types of
paper you can load in the input tray. Make sure to look at the long list of choices in

Print
84

Print from your computer

the Size list to see if a defined paper size already exists for the type of paper you are
using.
Paper type

Suggested paper size settings

Copier, multi-purpose, or plain papers

8.5x11 inch or A4

Inkjet papers

8.5x11 inch or A4

Letterhead

8.5x11 inch or A4

Photo papers

10x15 cm
4x6 inch
13x18 cm
5x7 inch
8.5x11 inch
A4
L (Japan only)
2L (Japan only)
20x25 cm (Germany only)
Mutsugiri (Japan only)

Hagaki

Hagaki (Japan only)

Transparency films

8.5x11 inch or A4

Set the copy paper type

Copy

You can set the paper type on the HP All-in-One. The default paper type setting for
copying is Automatic, which causes the HP All-in-One to detect the type of paper in the
input tray.
To set the paper type for copies
1. Press Copy Menu.
The Copy Menu appears.
2. Press to highlight Paper Type, and then press OK.
The Paper Type menu appears.

Change the copy settings for the current job

123

Chapter 10

3. Press until the appropriate paper type appears.
Refer to the following table to determine which paper type setting to choose based
on the paper loaded in the input tray.

Copy

Paper type

Control panel setting

Copier paper or letterhead

Plain Paper

HP Bright White Paper

Plain Paper

HP Premium Plus Photo Paper, Glossy

Premium Photo

HP Premium Plus Photo Paper, Matte

Premium Photo

HP Premium Plus 10 x 15 cm (4 x 6 inch)
Photo Paper

Premium Photo

HP Premium Plus 13 x 18 cm (5 x 7 inch)
Photo Paper

Premium Photo

HP Photo Paper

Photo Paper

HP Everyday Photo Paper

Everyday Photo

HP Everyday Photo Paper, Semi Gloss

Everyday Matte

HP Premium Paper

Premium Inkjet

Other inkjet paper

Premium Inkjet

HP Professional Brochure & Flyer Paper
(Glossy)

Brochure Glossy

HP Professional Brochure & Flyer Paper
(Matte)

Brochure Matte

HP Premium or Premium Plus Inkjet
Transparency Film

Transparency

Other transparency film

Transparency

Plain Hagaki

Plain Paper

Glossy Hagaki

Premium Photo

L (Japan only)

Premium Photo

Advanced Photo Paper

Advanced Photo

4. Press OK.

Change copy speed or quality
The HP All-in-One provides four options that affect copy speed and quality:
•
•

124

Maximum dpi produces the highest quality for all paper. Maximum dpi copies slower
than the other quality settings.
Best produces high quality for all paper and eliminates the banding (striping) effect
that sometimes occurs in solid areas. Best copies slower than the Normal or Fast
quality settings.

Use the copy features

•
•

Normal delivers high quality and is the recommended setting for most of your
copying. Normal copies faster than Best and is the default setting.
Fast copies faster than the Normal setting. The text is comparable to the quality of
the Normal setting, but the graphics might be lower quality. The Fast setting uses
less ink and extends the life of your ink cartridges.

To change the copy quality from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Copy Menu.
The Copy Menu appears.
4. Press to highlight Quality, and then press OK.
The Quality menu appears.
5. Press to select a copy quality.
6. Press OK.

Adjust the lightness and darkness of your copy
You can use the Lighter/Darker option to adjust the contrast of the copies you make.
To adjust the copy contrast from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Copy Menu.
The Copy Menu appears.
4. Press to highlight Lighter/Darker, and then press OK.
The Lighter/Darker menu appears.
5. Do one of the following:
• Press to darken the copy.
• Press to lighten the copy.
6. Press OK.

When you change copy settings from the control panel, the settings apply only to the
current copy job. To apply copy settings to all future copy jobs, you can save the settings
as defaults.
To set default copy settings from the control panel
1. Make any needed changes to the copy settings.
2. Press Copy Menu.
The Copy Menu appears.
3. Press to highlight Set As New Defaults, and then press OK.
4. Press to highlight Yes, change defaults, and then press OK.

Change default copy settings

125

Copy

Change default copy settings

Chapter 10

NOTE: The settings you specify here are only saved on the HP All-in-One. They do
not adjust the settings in the software. You can save your most frequently used
settings by using the software that you installed with the HP All-in-One.

Perform special copy jobs
In addition to supporting standard copy jobs, the HP All-in-One can perform special jobs
such as copying borderless photos and resizing originals.
This section contains the following topics:
•
•
•
•
•
•

Make a borderless copy of a photo
Resize an original to fit onto letter or A4 paper
Resize an original using custom settings
Crop an original
Shift the left margin
Improve the quality of a copy

Make a borderless copy of a photo
For the best quality when copying a photo, load 10 x 15 cm (4 x 6 inch) photo paper in
the photo tray and change your copy settings for the correct paper type and photo
enhancement.
To make a borderless copy of a photo from the control panel
1. Load 10 x 15 cm (4 x 6 inch) photo paper into the photo tray.

Copy

2. Load your original photo print side down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front edge
of the glass, as indicated by the engraved guides along the edge of the glass.
3. Press Start Copy Black or Start Copy Color.
The HP All-in-One makes a 10 x 15 cm (4 x 6 inch) borderless copy of your original
photo.
NOTE: If you loaded tabbed paper in the photo tray, you can remove the tab
from the copy of your photo once the ink has completely dried.

TIP: If the output is not borderless, set the paper type to Premium Photo, and
then try making the copy again.

126

Use the copy features

Related topics
• “Load 10 x 15 cm (4 x 6 inch) photo paper” on page 78
• “Set the copy paper type” on page 123

Resize an original to fit onto letter or A4 paper
You can use the Fit to Page feature to copy an original to fit within the printable margins
of a page without the risk of cropping some part of your original. This is useful for reducing
or enlarging an original. For example:
•

•

If you enlarge a 10 x 15 cm (4 x 6 inch) photo to make a borderless full-size copy on
letter or A4 paper, some part of your photo will be cropped. The Fit to Page feature
will enlarge the photo as much as possible to fit the page without cropping any part
of your photo.
If the image or text on your original fills the entire sheet of paper with no margins, you
can use the Fit to Page feature to reduce your original and prevent unwanted
cropping of the text or images at the edges of the sheet.
NOTE: In order to resize your original without changing the proportions or cropping
the edges, the HP All-in-One might leave an uneven amount of white space around
the edges of the paper.

Copy

To resize a document from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Copy Menu.
The Copy Menu appears.
4. Press to highlight Size, and then press OK.
The Size menu appears.
5. Press to highlight Fit to Page, and then press OK.

Resize an original using custom settings
You can use your own custom settings to reduce or enlarge a copy of a document.
To set a custom size from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Copy Menu.
The Copy Menu appears.

Perform special copy jobs

127

Chapter 10

4. Press to highlight Size, and then press OK.
The Size menu appears.
5. Press to highlight Custom 100%, and then press OK.
The Custom 100% menu appears.
6. Use the keypad or press or to select a percentage to reduce or enlarge the copy.
(The minimum and maximum percentage to resize a copy varies by model.)
7. Press OK.

Crop an original
After changing settings on the HP All-in-One for making a copy, you can use the crop
feature to specify a particular area of the original to copy.
To crop your copy from the control panel
1. Press Copy Menu.
The Copy Menu appears.
2. Change copy settings on the HP All-in-One to accurately reflect the copy you want to
make.
3. Press to highlight Crop, and then press OK.
The Crop screen appears.
4. Press the arrows on the directional pad to move the cursor to the upper left corner
where you want the crop to begin, and then press OK.
5. Press and to move the cursor to the lower right corner of the crop area, and then
press OK.
The HP All-in-One shows a preview image of the expected output on the display.
6. Press Start Copy Black or Start Copy Color to accept the preview and begin
copying.

Shift the left margin
You can shift the left margin of the copies by using the Margin Shift option. This helps
in binding or 3-hole punching for the copies produced. The HP All-in-One shifts the image
on the copies produced 0.95 cm (3/8 inch) to the right.

Copy

NOTE: When the Margin Shift feature is enabled, the right side of the copy images
may be cropped.
To shift the margin for your copy from the control panel
1. Press Copy Menu.
The Copy Menu appears.
2. Change copy settings on the HP All-in-One to accurately reflect the copy you want to
make.
3. Press to highlight Margin Shift, and then press OK.
The Margin Shift menu appears.
4. Press to highlight On, and then press OK.
5. Press Start Copy Black or Start Copy Color to begin copying.

128

Use the copy features

Improve the quality of a copy
You can use the Enhancements feature to adjust the quality of text documents by
sharpening edges of black text or adjust photographs by enhancing light colors that might
otherwise appear white.
The Mixed enhancement is the default option. Use the Mixed enhancement to sharpen
edges of most originals. You can use Photo enhancements to enhance light colors that
might otherwise appear white.
You might be able to fix the following types of issues by changing the Enhancements
setting to Photo or None:
•
•
•
•

Stray dots of color surround some text on your copies
Large, black typefaces look splotchy (not smooth)
Thin, colored objects or lines contain black sections
Horizontal grainy or white bands appear in light- to medium-gray areas

To copy an overexposed photo
1. Make sure you have paper loaded in the input tray.
2. Position the photo on the glass so the long edge of the photo is along the front edge
of the glass.
Load your original print side down on the right front corner of the glass.
3. Press Copy Menu.
The Copy Menu appears.
4. Press to highlight Enhancements, and then press OK.
The Enhancements menu appears.
5. Press to highlight Photo, and then press OK.
6. Press Start Copy Black or Start Copy Color.

Stop copying
To stop copying
▲ Press Cancel on the control panel.

Stop copying

129

Copy

To copy a blurred document from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Copy Menu.
The Copy Menu appears.
4. Press to highlight Enhancements, and then press OK.
The Enhancements menu appears.
5. Press to highlight Text, and then press OK.
6. Press Start Copy Black or Start Copy Color.

Chapter 10

Copy
130

Use the copy features

11 Use the fax features
You can use the HP All-in-One to send and receive faxes, including color faxes. You can
set up speed dial entries to send faxes quickly and easily to frequently used numbers.
From the control panel, you can also set a number of fax options, such as resolution and
the contrast between lightness/darkness on the faxes you send.
NOTE: Before you begin faxing, make sure you have set up the HP All-in-One
properly for faxing. You might have already done this as part of the initial setup, by
using either the control panel or the software that came with the HP All-in-One.
You can verify the fax is set up correctly by running the fax setup test from the control
panel. You can access this test from the Setup menu.
This section contains the following topics:
•
•
•
•

Send a fax
Receive a fax
Fax over the Internet using IP phone
Stop faxing

Send a fax
You can send a fax in a variety of ways. Using the control panel, you can send a blackand-white or color fax from the HP All-in-One. You can also send a fax manually from an
attached phone. This allows you to speak with the recipient before sending the fax.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•

Send a basic fax
Send a fax using speed dials
Send a fax manually from a phone
Send a fax using monitor dialing
Scan a fax to send from memory
Schedule a fax to send later
Broadcast a fax to multiple recipients
Send a color original or photo fax
Change the fax resolution and Lighter/Darker settings
Send a fax in Error Correction Mode

Send a basic fax
You can easily send a single- or multiple-page black-and-white fax by using the control
panel, as described here.

Fax

NOTE: If you need printed confirmation that your faxes were successfully sent,
enable fax confirmation before sending any faxes.

Use the fax features

131

Chapter 11

TIP: You can also send a fax manually from a phone or by using monitor dialing.
These features allow you to control the pace of your dialing. They are also useful
when you want to use a calling card to charge the call and you need to respond to
tone prompts while dialing.
To send a basic fax from the control panel
1. Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.
NOTE: If you are sending a multiple-page fax, you must load the originals in the
document feeder tray. You cannot fax a multiple-page document from the glass.
2. Press Fax Menu.
Enter the fax number by using the keypad, press
or press to access speed dials.

to redial the last number dialed,

TIP: To add a pause in the fax number you are entering, press the Symbols
(*) button repeatedly until a dash (-) appears on the display.
3. Press Start Fax Black.
• If the device detects an original loaded in the automatic document feeder,
the HP All-in-One sends the document to the number you entered.
• If the device does not detect an original loaded in the automatic document
feeder, the Feeder Empty prompt appears. Make sure your original is loaded
print side down on the glass, and then press to highlight Fax original from
scanner glass, and press OK.

TIP: If the recipient reports issues with the quality of the fax you sent, you can
try changing the resolution or contrast of your fax.
Related topics
• “Send a fax manually from a phone” on page 133
• “Send a fax using monitor dialing” on page 134
• “Change the fax resolution and Lighter/Darker settings” on page 137
• “Print fax confirmation reports” on page 150
• “Send a color original or photo fax” on page 136

Send a fax using speed dials
You can quickly send a black-and-white or color fax from the HP All-in-One using speed
dials. This section provides instructions for sending the fax in black and white.

Fax

132

Use the fax features

To send a fax using speed dials from the control panel
1. Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.
NOTE: If you are sending a multiple-page fax, you must load the originals in the
document feeder tray. You cannot fax a multiple-page document from the glass.
2. Press Fax Menu.
3. Press to access speed dials.
4. Press until the appropriate speed dial entry is highlighted, or enter the speed dial
code by using the keypad on the control panel.
Press OK.
5. Press Start Fax Black.
• If the device detects an original loaded in the automatic document feeder,
the HP All-in-One sends the document to the number you entered.
• If the device does not detect an original loaded in the automatic document
feeder, the Feeder Empty prompt appears. Make sure your original is loaded
print side down on the glass, and then press to highlight Fax original from
scanner glass, and press OK.
TIP: If the recipient reports issues with the quality of the fax you sent, you can
try changing the resolution or contrast of your fax.
Related topics
“Set up speed dialing” on page 65

Send a fax manually from a phone
Sending a fax manually allows you to make a phone call and talk with the recipient before
you send the fax. This is useful if you want to inform the recipient that you are going to
send them a fax before sending it. When you send a fax manually, you can hear the dial
tones, telephone prompts, or other sounds through the handset on your telephone. This
makes it easy for you to use a calling card to send your fax.

Fax

Depending on how the recipient has their fax machine set up, the recipient might answer
the phone, or the fax machine might take the call. If a person answers the phone, you
can speak with the recipient before sending the fax. If a fax machine answers the call,
you can send the fax directly to the fax machine when you hear the fax tones from the
receiving fax machine.

Send a fax

133

Chapter 11

To send a fax manually from a connected phone
1. Load your originals print side up into the document feeder tray.
NOTE: This feature is not supported if you load your originals on the glass. You
must load your originals in the document feeder tray.
2. Dial the number by using the keypad on the phone that is connected to the HP All-inOne.
NOTE: Do not use the keypad on the control panel of the HP All-in-One. You
must use the keypad on your phone to dial the recipient's number.
3. If the recipient answers the telephone, you can engage in a conversation before
sending your fax.
NOTE: If a fax machine answers the call, you will hear fax tones from the
receiving fax machine. Proceed to the next step to transmit the fax.
4. Once you are ready to send the fax, press Start Fax Black or Start Fax Color.
If you were speaking with the recipient before sending the fax, inform the recipient
that they should press Start on their fax machine after they hear fax tones.
The telephone line is silent while the fax is transmitting. At this point, you can hang
up the telephone. If you want to continue speaking with the recipient, remain on the
line until the fax transmission is complete.

Send a fax using monitor dialing
Monitor dialing allows you to dial a number from the control panel as you would dial a
regular telephone. When you send a fax using monitor dialing, you can hear the dial tones,
telephone prompts, or other sounds through the speakers on the HP All-in-One. This
enables you to respond to prompts while dialing, as well as control the pace of your
dialing.
NOTE: Make sure the fax volume is turned on, or you will not hear a dial tone.
To send a fax using monitor dialing from the control panel
1. Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.
2. Press Start Fax Black or Start Fax Color.
3. Once you hear the dial tone, enter the number by using the keypad on the control
panel.
4. Follow any prompts that might occur.
Your fax is sent when the receiving fax machine answers.
Related topics
• “Adjust the volume” on page 26
• “Set up speed dialing” on page 65

Fax
134

Use the fax features

Scan a fax to send from memory
You can scan a black-and-white fax into memory and then send the fax from memory.
This feature is useful if the fax number you are trying to reach is busy or temporarily
unavailable. The HP All-in-One scans the originals into memory and sends them once it
is able to connect to the receiving fax machine. After the HP All-in-One scans the pages
into memory, you can immediately remove the originals from the document feeder tray.
To scan a fax to send from memory
1. Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.
2. Press the Fax Menu button twice to advance to the Fax Menu.
3. Press until Scan and Fax is highlighted, and then press OK.
4. Enter the fax number by using the keypad.
5. Press Start Fax Black.
NOTE: If you press Start Fax Color, the fax will be sent in black and white and
a message appears on the display.
The HP All-in-One scans the originals into memory and sends the fax when the
receiving fax machine is available.

Schedule a fax to send later
You can schedule a black-and-white fax to be sent within the next 24 hours. This enables
you to send a black-and-white fax late in the evening, when phone lines are not as busy
or phone rates are lower, for example. The HP All-in-One automatically sends your fax
at the specified time.
You can only schedule one fax to be sent at a time. You can continue to send faxes
normally, however, while a fax is scheduled.
NOTE: You cannot schedule a color fax due to memory limitations.

Fax

To schedule a fax from the control panel
1. Load your originals print side up into the document feeder tray.
2. Press the Fax Menu button twice to advance to the Fax Menu.
3. Press until Send Fax Later is highlighted, and then press OK.
4. Enter the send time by using the numeric keypad, and then press OK. If prompted,
press 1 for AM, or 2 for PM.
5. Enter the fax number by using the keypad.
6. Press Start Fax Black.
The HP All-in-One scans all pages and the scheduled time appears on the display.
The HP All-in-One sends the fax at the scheduled time.

Send a fax

135

Chapter 11

To cancel a scheduled fax
1. Press the Fax Menu button twice to advance to the Fax Menu.
2. Press to highlight Send Fax Later and then press OK.
The Fax Is Scheduled screen appears.
3. Press to highlight Cancel scheduled fax and press OK.
NOTE: You can also cancel the scheduled fax by pressing Cancel on the control
panel when the Send Fax Later message is visible on the display.

Broadcast a fax to multiple recipients
You can send a fax to multiple recipients without first setting up a group speed dial.
NOTE: The list of recipients you specify for this fax is not saved and only works for
sending faxes in black. If you intend to send other faxes to the same recipient list, you
should create a group speed dial list.
To broadcast a fax to multiple recipients from the control panel
1. Press Fax Menu twice to advance to the Fax Menu screen.
2. Press to highlight Broadcast Fax, and press OK.
The Enter Fax Number screen appears.
3. Enter the fax number by using the keypad, or press to access speed dials.
NOTE: You can add up to 20 individual fax numbers.
4. Press Start Fax Black.
5. When prompted, load your originals print side up and top first in the center of the
document feeder tray.
6. Press Start Fax Black again.
Related topics
“Set up group speed dial entries” on page 66

Send a color original or photo fax
You can fax a color original or photo from the HP All-in-One. If the HP All-in-One
determines that the recipient's fax machine only supports black-and-white faxes, the
HP All-in-One sends the fax in black and white.
HP recommends that you use only color originals for color faxing.

Fax
136

Use the fax features

To send a color fax from the control panel
1. Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.
NOTE: If you are sending a multiple-page fax, you must load the originals in the
document feeder tray. You cannot fax a multiple-page document from the glass.
2. Enter the fax number by using the keypad.
TIP: To add a pause in the fax number you are entering, press the Symbols
(*) button repeatedly until a dash (-) appears on the display.
3. Press Start Fax Color.
• If the device detects an original loaded in the automatic document feeder,
the HP All-in-One sends the document to the number you entered.
• If the device does not detect an original loaded in the automatic document
feeder, the Feeder Empty prompt appears. Make sure your original is loaded
print side down on the glass, and then press to highlight Fax original from
scanner glass, and press OK.
NOTE: If the recipient's fax machine only supports black-and-white faxes, the HP Allin-One automatically sends the fax in black and white. A message appears after the
fax has been sent indicating that the fax was sent in black and white. Press OK to
clear the message.

Change the fax resolution and Lighter/Darker settings
You can change the Resolution and Lighter/Darker settings for documents that you are
faxing.
NOTE: These settings do not affect copy settings. Copy resolution and lightness/
darkness are set independently from fax resolution and lightness/darkness. Also, the
settings that you change from the control panel do not affect faxes you send from your
computer.
This section contains the following topics:
•
•
•

Change the fax resolution
Change the Lighter/Darker setting
Set new default settings

Change the fax resolution
The Resolution setting affects the transmission speed and quality of faxed black-andwhite documents. If the receiving fax machine does not support the resolution you have
chosen, the HP All-in-One sends faxes at the highest resolution supported by the
receiving fax machine.

Fax

NOTE: You can only change the resolution for faxes that you are sending in black
and white. The HP All-in-One sends all color faxes using Fine resolution.

Send a fax

137

Chapter 11

The following resolution settings are available for sending faxes: Fine, Very Fine,
Photo, and Standard.
•
•

•

Fine: provides high-quality text suitable for faxing most documents. This is the default
setting. When sending faxes in color, the HP All-in-One always uses the Fine setting.
Very Fine: provides the best quality fax when you are faxing documents with very
fine detail. If you choose Very Fine, be aware that the faxing process takes longer to
complete and you can only send black-and-white faxes using this resolution. If you
send a color fax, it will be sent using Fine resolution instead.
Photo: provides the best quality fax when sending photographs in black and white.
If you choose Photo, be aware that the faxing process takes longer to complete.
When faxing photographs in black and white, HP recommends that you choose
Photo.
Standard: provides a lower quality fax so that the faxing process will take less time
to complete.

When you exit the Fax menu, this option returns to the default setting unless you set your
changes as the default.
To change the resolution from the control panel
1. Press Fax Menu.
The Enter Fax Number screen appears.
2. Enter the fax number by using the keypad, press to redial the last number dialed,
or press to access speed dials.
3. Press Fax Menu again.
The Fax Menu appears.
4. Press to highlight Resolution, and then press OK.
Press to highlight a resolution setting, and then press OK.
5. Press Start Fax Black.
NOTE: If you press Start Fax Color, the fax will be sent using the Fine setting.
6. When prompted, load your originals print side up and top first in the center of the
document feeder tray.
7. Press Start Fax Black again.
Related topics
“Set new default settings” on page 139
Change the Lighter/Darker setting
You can change the contrast of a fax to be darker or lighter than the original. This feature
is useful if you are faxing a document that is faded, washed out, or handwritten. You can
darken the original by adjusting the contrast.
NOTE: The Lighter/Darker setting applies to black and white faxes only, not color
faxes.
When you exit the Fax menu, this option returns to the default setting unless you set your
changes as the default.
Fax
138

Use the fax features

To change the Lighter/Darker setting from the control panel
1. Press Fax Menu.
The Enter Fax Number screen appears.
2. Enter the fax number by using the keypad, press to redial the last number dialed,
or press to access speed dials.
3. Press Fax Menu again.
The Fax Menu appears.
4. Press to highlight Lighter/Darker, and then press OK.
The Lighter/Darker menu appears.
5. Press to lighten the fax or press to darken it.
The indicator moves to the left or right as you press an arrow.
6. Press Start Fax Black.
7. When prompted, load your originals print side up and top first in the center of the
document feeder tray.
8. Press Start Fax Black again.
Related topics
“Set new default settings” on page 139
Set new default settings
You can change the default value for the Resolution and Lighter/Darker settings
through the control panel.
To set new default settings from the control panel
1. Press Fax Menu until the Fax Menu appears.
You might need to press Fax Menu more than once to display this menu.
2. Make your changes to Resolution and Lighter/Darker.
3. Press to highlight Set As New Defaults, and then press OK.

Send a fax in Error Correction Mode
Error Correction Mode (ECM) prevents loss of data due to poor phone lines by detecting
errors that occur during transmission and automatically requesting retransmission of the
erroneous portion. Phone charges are unaffected, or might even be reduced, on good
phone lines. On poor phone lines, ECM might increase sending time and phone charges,
but sends the data much more reliably. The default setting is On. Turn ECM off only if it
increases phone charges substantially, and you can accept poorer quality in exchange
for reduced charges.
Before turning the ECM setting off, consider the following. If you turn ECM off
The quality and transmission speed of faxes you send and receive are affected.
The Fax Speed is automatically set to Medium (14400).
You will no longer be able to send or receive faxes in color.

Fax

•
•
•

Send a fax

139

Chapter 11

To change the ECM setting from the control panel
1. Press Setup.
2. Press to highlight Advanced Fax Setup, and then press OK.
The Advanced Fax Setup menu appears.
3. Press to highlight Error Correction Mode, and then press OK.
The Error Correction Mode menu appears.
4. Press to highlight Off or On.
5. Press OK.

Receive a fax
The HP All-in-One can receive faxes automatically or manually. If you turn off the Auto
Answer option, you will need to receive faxes manually. If you turn on the Auto
Answer option (the default setting), the HP All-in-One automatically answers incoming
calls and receives faxes after the number of rings specified by the Rings to Answer
setting. (The default Rings to Answer setting is five rings.)
You can receive faxes manually from a phone that is:
•
•

Directly connected to the HP All-in-One (on the 2-EXT port)
On the same telephone line, but not directly connected to the HP All-in-One

If you receive a legal-size fax and the HP All-in-One is not currently set to use legal-size
paper, the device reduces the fax so that it fits on the paper that is loaded in the HP Allin-One. If you have disabled the Automatic Reduction feature, the HP All-in-One might
print the fax on more than one page.
This section contains the following topics:
•
•
•
•
•
•
•
•
•

Receive a fax manually
Set up backup fax reception
Reprint received faxes from memory
Poll to receive a fax
Forward faxes to another number
Set the paper size for received faxes
Set up the HP All-in-One to check the paper type before printing faxes
Set automatic reduction for incoming faxes
Block junk fax numbers

Receive a fax manually
When you are on the phone, the person you are speaking with can send you a fax while
you are still connected. This is referred to as manual faxing. Use the instructions in this
section to receive a manual fax.
You can receive faxes manually from a phone that is:
•
•

Directly connected to the HP All-in-One (on the 2-EXT port)
On the same phone line, but not directly connected to the HP All-in-One

Fax
140

Use the fax features

To receive a fax manually
1. Make sure the HP All-in-One is turned on and you have paper loaded in the input tray.
2. Remove any originals from the document feeder tray.
3. Set the Rings to Answer setting to a high number to allow you to answer the incoming
call before the HP All-in-One answers. Or, turn off the Auto Answer setting so that
the HP All-in-One does not automatically answer incoming calls.
4. If you are currently on the phone with the sender, instruct the sender to press Start
on their fax machine.
5. When you hear fax tones from a sending fax machine, do the following:
a. Press Start Fax Black or Start Fax Color on the control panel of the HP All-inOne.
b. When prompted, press to highlight Receive Fax Manually, and then press
OK.
6. Press Start Fax Black again.
7. After the HP All-in-One begins to receive the fax, you can hang up the phone or remain
on the line. The phone line is silent during fax transmission.
Related topics
• “Set the number of rings before answering” on page 62
• “Set the answer mode” on page 62

Set up backup fax reception
Depending on your preference and security requirements, you can set up the HP All-inOne to store all the faxes it receives, only the faxes it receives while the device is in an
error condition, or none of the faxes it receives.
The following Backup Fax Reception modes are available:
On

The default setting. When Backup Fax Reception is On, the HP All-in-One
stores all faxes it receives in memory. This enables you to reprint one or all
of the most recently printed faxes if they are still saved in memory.
NOTE: When the memory gets low, the HP All-in-One overwrites the
oldest, printed faxes as it receives new faxes. If the memory becomes full
of unprinted faxes, the HP All-in-One will stop answering incoming fax calls.
NOTE: If you receive a fax that is too large, such as a very detailed color
photo, it might not be stored in memory due to memory limitations.
Causes the HP All-in-One to store faxes in memory only if there is an error
condition that prevents the HP All-in-One from printing the faxes (for
example, if the HP All-in-One runs out of paper). The HP All-in-One will
continue to store incoming faxes as long as there is memory available. (If
the memory becomes full, the HP All-in-One will stop answering incoming
fax calls.) When the error condition is resolved, the faxes stored in memory
print automatically and are then deleted from memory.

Off

Means that faxes are never stored in memory. (You might want to turn off
Backup Fax Reception for security purposes, for example.) If an error
condition occurs that prevents the HP All-in-One from printing (for example,
the HP All-in-One runs out of paper), the HP All-in-One will stop answering
incoming fax calls.
Fax

On Error Only

Receive a fax

141

Chapter 11

NOTE: If Backup Fax Reception is enabled and you turn off the HP All-in-One, all
faxes stored in memory are deleted, including any unprinted faxes that you might have
received while the HP All-in-One was in an error condition. You will need to contact
the senders to ask them to resend any unprinted faxes. For a list of the faxes you
have received, print the Fax Log. The Fax Log is not deleted when the HP All-in-One
is turned off.
To set backup fax reception from the control panel
1. Press Setup.
2. Press to highlight Advanced Fax Setup, and then press OK.
The Advanced Fax Setup menu appears.
3. Press to highlight Backup Fax Reception, and then press OK.
The Backup Fax Reception menu appears.
4. Press to highlight On, On Error Only, or Off.
5. Press OK.
Related topics
“Reprint received faxes from memory” on page 142

Reprint received faxes from memory
If you set the Backup Fax Reception mode to On, the HP All-in-One stores faxes it
receives in memory, whether the device has an error condition or not.
NOTE: After the memory becomes full, the HP All-in-One overwrites the oldest,
printed faxes as it receives new faxes. If all the stored faxes are unprinted, the HP Allin-One will not receive any more fax calls until you print or delete the faxes from
memory. You might also want to delete the faxes in memory for security or privacy
purposes.
You can choose to reprint one or reprint all faxes in memory. For example, you might
need to reprint your faxes if you lost the copy of your last printout.
To reprint faxes in memory from the control panel
1. Make sure you have paper loaded in the input tray.
2. Press Setup.
3. Press to highlight Tools, and then press OK.
The Tools menu appears.
4. Press to highlight Reprint Faxes in Memory, and then press OK.
The Reprint menu appears.
5. Do one of the following:
To reprint one fax from memory
a. Press to highlight One Fax, and then press OK.
The Select Fax menu appears.
b. Press to highlight a fax number, and then press OK.
Fax
142

Use the fax features

To reprint all faxes in memory
▲ Press to highlight All faxes in memory, and then press OK.
6. If you want to stop reprinting the faxes in memory, press Cancel.
To delete all the faxes in memory from the control panel
1. Press Setup.
2. Press to highlight Tools, and then press OK.
The Tools menu appears.
3. Press to highlight Clear Fax Log, and then press OK.
NOTE: You can also delete any faxes stored in memory by turning off the HP All-inOne. Press the On button to turn off the HP All-in-One. All faxes stored in memory
will be deleted from memory when you turn off the power to the HP All-in-One.
Related topics
“Set up backup fax reception” on page 141

Poll to receive a fax
Polling allows the HP All-in-One to ask another fax machine to send a fax that it has in
its queue. When you use the Poll to Receive feature, the HP All-in-One calls the
designated fax machine and requests the fax from it. The designated fax machine must
be set for polling and have a fax ready to send.
NOTE: The HP All-in-One does not support polling pass codes. Polling pass codes
are a security feature that require the receiving fax machine to provide a pass code
to the device it is polling in order to receive the fax. Make sure the device you are
polling does not have a pass code set up or the HP All-in-One will not be able to
receive the fax.
To set up poll to receive a fax from the control panel
1. Press the Fax Menu button twice to advance to the Fax Menu.
2. Press to highlight Poll to Receive, and then press OK.
3. When prompted, enter the fax number of the other fax machine.
4. Press Start Fax Black or Start Fax Color.
NOTE: If you press Start Fax Color but the sender sent the fax in black and
white, the HP All-in-One prints the fax in black and white.

Forward faxes to another number
You can set up the HP All-in-One to forward your faxes to another fax number. If you
receive a color fax, the HP All-in-One forwards the fax in black and white.

Fax

HP recommends that you verify the number you are forwarding to is a working fax line.
Send a test fax to make sure the fax machine is able to receive your forwarded faxes.

Receive a fax

143

Chapter 11

To forward faxes from the control panel
1. Press Setup.
2. Press to highlight Advanced Fax Setup, and then press OK.
The Advanced Fax Setup menu appears.
3. Press to highlight Fax Forwarding, and then press OK.
The Fax Forwarding menu appears.
4. Press until On-Forward or On-Print & Forward appears, and then press OK.
• Choose On-Forward if you want to forward the fax to another number without
printing a backup copy on the HP All-in-One.
NOTE: If the HP All-in-One is not able to forward the fax to the designated
fax machine (if it is not turned on, for example), the HP All-in-One will print the
fax. If you set up the HP All-in-One to print error reports for received faxes, it
will also print an error report.
•

Choose On-Print & Forward to print a backup copy of your received fax on the
HP All-in-One while forwarding the fax to another number.
5. At the prompt, enter the number of the fax machine that will receive the forwarded
faxes, and then press OK.
6. At the prompt, enter a start time and date and a stop time and date, and then press
OK.
If the HP All-in-One loses power when Fax Forwarding is set up, the HP All-in-One
saves the Fax Forwarding setting and phone number. When power is restored to
the device, the Fax Forwarding setting is still On.
NOTE: You can cancel fax forwarding by pressing Cancel on the control panel
when the Fax Forwarding message is visible on the display, or you can select
Off from the Fax Forwarding menu.

Set the paper size for received faxes
You can select the paper size for received faxes. The paper size you select should match
what is loaded in your input tray. Faxes can be printed on letter, A4, or legal paper only.
NOTE: If an incorrect paper size is loaded in the input tray when you receive a fax,
the fax does not print and an error message appears on the display. Load letter, A4,
or legal paper, and then press OK to print the fax.
To set the paper size for received faxes from the control panel
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
The Basic Fax Setup menu appears.
3. Press to highlight Fax Paper Size, and then press OK.
The Fax Paper Size menu appears.
4. Press to highlight an option, and then press OK.

Set up the HP All-in-One to check the paper type before printing faxes

Fax

By default, the HP All-in-One checks the paper type before printing a fax to ensure plain
paper is loaded in the input tray. This prevents wasted paper and ink that might result
144

Use the fax features

from printing faxes on photo or transparency paper left in the input tray from a previous
job.
If you have plain paper loaded and the HP All-in-One is erroneously detecting your paper
as a type other than plain, you can change the Paper Checking setting, so this detection
does not take place before printing faxes.
NOTE: The HP All-in-One always checks the paper size before printing faxes,
regardless of the Paper Checking setting. This is to prevent ink from overprinting into
the device if a full-size fax was printed on small-size paper.
To turn off paper checking from the control panel
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
3. Press to highlight Paper Checking, and then press OK.
4. Press to highlight Off, and then press OK.

Set automatic reduction for incoming faxes
The Automatic Reduction setting determines what the HP All-in-One does if it receives
a fax that is too large for the default paper size. This setting is turned on by default, so
the image of the incoming fax is reduced to fit on one page, if possible. If this feature is
turned off, information that does not fit on the first page is printed on a second page.
Automatic Reduction is useful when you receive a legal-size fax and letter-size paper
is loaded in the input tray.
To set automatic reduction from the control panel
1. Press Setup.
2. Press to highlight Advanced Fax Setup, and then press OK.
The Advanced Fax Setup menu appears.
3. Press to highlight Automatic Reduction, and then press OK.
The Automatic Reduction menu appears.
4. Press to highlight Off or On.
5. Press OK.

Block junk fax numbers
If you subscribe to a caller ID service through your phone provider, you can block specific
fax numbers, so the HP All-in-One does not print faxes received from those numbers in
the future. When an incoming fax call is received, the HP All-in-One compares the number
to the list of junk fax numbers you set up to determine if the call should be blocked. If the
number matches a number in the blocked fax numbers list, the fax is not printed. (The
maximum number of fax numbers you can block varies by model.)
This section contains the following topics:
Set the junk fax mode
Add numbers to the junk fax list
Remove numbers from the junk fax list
Fax

•
•
•

Receive a fax

145

Chapter 11

NOTE: This feature is not supported in all countries/regions. If it is not supported in
your country/region, Junk Fax Blocker Set Up does not appear in the Basic Fax
Setup menu.
Set the junk fax mode
By default, Block Junk Fax mode is turned On. If you do not subscribe to a caller ID
service through your phone provider, or do not want to use this feature, you can turn off
this setting.
To set the junk fax mode
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
The Basic Fax Setup menu appears.
3. Press to highlight Junk Fax Blocker Set Up, and then press OK.
The Junk Fax Blocker Set Up menu appears.
4. Press to highlight Block Junk Fax, and then press OK.
5. Press to highlight On or Off, and then press OK.
Add numbers to the junk fax list
There are two ways to add a number to your junk list. You can select numbers from your
caller ID history, or you can enter new numbers. The numbers in your junk list will be
blocked if Block Junk Fax mode is set to On.
To select a number from the caller ID list
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
The Basic Fax Setup menu appears.
3. Press to highlight Junk Fax Blocker Set Up, and then press OK.
The Junk Fax Blocker menu appears.
4. Press to highlight Add number to Junk List, and then press OK.
The How to Add menu appears.
5. Press to highlight Select number from Caller ID history, and then press OK.
The Add Numbers menu appears.
6. Press to scroll through the numbers from which you have received faxes. When
the number you want to block is highlighted, press OK to select it.
7. When the Junk Fax Blocker prompt appears, do one of the following:
• If you want to add another number to the list of junk fax numbers, repeat
steps 4 through 6.
• If you are done, press Back.
To manually enter a number to block
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
The Basic Fax Setup menu appears.
Fax
146

Use the fax features

3. Press to highlight Junk Fax Blocker Set Up, and then press OK.
The Junk Fax Blocker menu appears.
4. Press to highlight Add number to Junk List, and then press OK.
The How to Add menu appears.
5. Press to highlight Enter new number, and then press OK.
The Enter Junk Number menu appears.
6. Use the keypad to enter a fax number to block, and then press OK.
Make sure you accurately enter the caller ID of the number you want to block. On
many junk faxes, the number that is printed in the fax header is different than the
actual caller ID number.
7. When the Junk Fax Blocker prompt appears, do one of the following:
• If you want to add another number to the list of junk fax numbers, repeat
steps 4 through 6.
• If you are done, press Back.
Remove numbers from the junk fax list
If you no longer want to block a fax number, you can remove a number from your junk
fax list.
To remove a number from the junk fax list
1. Press Setup.
2. Press to highlight Basic Fax Setup, and then press OK.
The Basic Fax Setup menu appears.
3. Press to highlight Junk Fax Blocker Set Up, and then press OK.
The Junk Fax Blocker menu appears.
4. Press to highlight Remove from Junk List, and then press OK.
The Remove Numbers menu appears.
5. Press to scroll through the numbers you have blocked. When the number you want
to remove is highlighted, press OK to select it.

Fax over the Internet using IP phone
You might subscribe to a low-cost phone service that allows you to send and receive
faxes with the HP All-in-One by using the Internet. This method is called Fax over Internet
Protocol (FoIP). You probably use a FoIP service (provided by your telephone company)
if you:
•
•

Dial a special access code along with the fax number, or
Have an IP converter box that connects to the Internet and provides analog phone
ports for the fax connection.

The FoIP service might not work properly when the HP All-in-One is sending and receiving
faxes at high speed (33600 bps). If you experience problems sending and receiving faxes,
Fax over the Internet using IP phone

147

Fax

NOTE: You can only send and receive faxes by connecting a phone cord to the 1LINE port on the back of the HP All-in-One, not by connecting the phone cord to the
Ethernet port. This means that your connection to the Internet must be done either
through a converter box (which supplies regular analog phone jacks for fax
connections) or your telephone company.

Chapter 11

use a slower fax speed. You can do this by changing the Fax Speed setting from Fast
(33600) (the default) to Medium (14400).
You should also check with your telephone company to make sure their Internet phone
service supports faxing. If they do not support faxing, you might encounter intermittent
problems when trying to send and receive faxes through the Internet.
Related topics
“Set the fax speed” on page 30

Stop faxing
You can cancel a fax you are sending or receiving at any time.
To stop faxing from the control panel
▲ Press Cancel on the control panel to stop a fax you are sending or receiving. If the
HP All-in-One does not stop faxing, press Cancel again.
The HP All-in-One prints any pages it has already started printing and then cancels
the remainder of the fax. This can take a few moments.
To cancel a number you are dialing
▲ Press Cancel to cancel a number you are currently dialing.

Fax
148

Use the fax features

The HP All-in-One enables you to print reports and to control when reports are printed
automatically. You can also print forms such as ruled papers and checklists.
This section contains the following topics:
•
•

Print reports
Print forms

Print reports
The HP All-in-One allows you to print reports and to control when reports are printed
automatically. Use the reporting features to print self-test reports and fax reports.
NOTE: Some reports might not be available in your country/region.
This section contains the following topics:
•
•

Print a self-test report
Print fax reports

Print a self-test report
If you are experiencing problems with printing, print a self-test report before you replace
the ink cartridges. This report provides useful information on several aspects of your
device, including your ink cartridges.
To print a self-test report
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. Press Setup.
3. Press to highlight Print Report, and then press OK.
4. Press to highlight Self-Test Report, and then press OK.
The HP All-in-One prints a self-test report, which contains the following information:
• Product information: includes the model number, serial number, and other
product information.
• Revision information: includes the firmware version number.
• Ink delivery system information: displays the approximate ink level of each
installed ink cartridge, the status of each ink cartridge, the date each cartridge
was installed, and the date each cartridge will expire.
• Print quality pattern: displays six color blocks, representing each of the six
installed cartridges. Solid, even blocks of color indicate there are no print quality
problems. When streaks are displayed or there are missing blocks, clean the print
head using the procedure described in “Clean the print head” on page 162. If the
color blocks still show print quality problems after cleaning the print head, align
the printer using the procedure described in “Align the printer” on page 161. If

Print reports and forms

149

Print reports and forms

12 Print reports and forms

Chapter 12

the color blocks continue to show print quality problems after cleaning and
aligning, contact HP support.

Print reports and forms

•
•

Bluetooth information: lists the settings for the optional Bluetooth device.
History log: contains information that might be used for diagnostic purposes if
you need to call HP support.

Print fax reports
You can set up the HP All-in-One to print error reports and confirmation reports
automatically for each fax you send and receive. You can also manually print system
reports as you need them; these reports provide useful system information about the
HP All-in-One.
By default, the HP All-in-One is set to print a report only if there is a problem with sending
or receiving a fax. A confirmation message that indicates whether a fax was successfully
sent appears briefly on the display after each transaction.
This section contains the following topics:
•
•
•
•

Print fax confirmation reports
Print fax error reports
Print the fax log
Print other reports

Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either On Fax
Send or Send & Receive.
The default fax confirmation setting is Off. This means that the HP All-in-One will not print
a confirmation report for each fax sent or received. A confirmation message indicating
whether a fax was successfully sent appears briefly on the display after each transaction.
To enable fax confirmation from the control panel
1. Press Setup.
2. Press to highlight Print Report, and then press OK.
The Print Report menu appears.

150

Print reports and forms

to highlight Fax Confirmation, and then press OK.
to select one of the following, and then press OK.

Off

Does not print a fax confirmation report when you send and receive
faxes successfully. This is the default setting.

On Fax Send

Prints a fax confirmation report for every fax you send.

On Fax Receive

Prints a fax confirmation report for every fax you receive.

Send & Receive

Prints a fax confirmation report for every fax you send and receive.

TIP: If you choose On Fax Send or Send & Receive, and scan your fax to send
from memory, you can include an image of the first page of the fax on the Fax
Sent Confirmation report. Press to highlight Image on Fax Send Report.
Select On from the Image on Fax Send Report menu.
Print fax error reports
You can configure the HP All-in-One so that it automatically prints a report when there is
an error during transmission or reception.
To set the HP All-in-One to print fax error reports automatically
1. Press Setup.
2. Press to highlight Print Report, and then press OK.
The Print Report menu appears.
3. Press to highlight Fax Error Report, and then press OK.
4. Press to select one of the following, and then press OK.
Send & Receive

Prints whenever there is any kind of fax error. This is the default setting.

Off

Does not print any fax error reports.

On Fax Send

Prints whenever there is a transmission error.

On Fax Receive

Prints whenever there is a receiving error.

Print the fax log
The fax log enables you to print a log of approximately the last 30 fax transactions. If a
fax transaction had an error, the error is indicated by an error code in the fax log.
If necessary (for security purposes, for example), you can easily clear the entire log from
memory. This also deletes any saved faxes from memory.
To print the fax log from the control panel
1. Press Setup.
2. Press to highlight Print Report, and then press OK.
The Print Report menu appears.
3. Press to highlight Fax Log, and then press OK to print the Fax Log.

Print reports

151

Print reports and forms

3. Press
4. Press

Chapter 12

Print reports and forms

To clear the fax log from memory
1. Press Setup.
2. Press to highlight Tools, and then press OK.
The Tools menu appears.
3. Press to highlight Clear Fax Log, and then press OK.
The fax log and any faxes that might have been stored in memory are deleted.
NOTE: Clearing the fax log will not clear the caller ID history. To delete caller ID
history, clear the fax log, then turn off the HP All-in-One, and then turn it back on.
Related topics
“The fax log report shows an error” on page 256
Print other reports
You can manually generate reports about the HP All-in-One, such as the status of the
last fax you sent or a list of programmed speed dial entries.
To print reports from the control panel
1. Press Setup.
2. Press to highlight Print Report, and then press OK.
The Print Report menu appears.
3. Press to select one of the following, and then press OK.
Fax Confirmation

Lets you set up fax confirmation reports to print automatically.
TIP: If you choose On Fax Send or Send & Receive, and scan your
fax to send from memory, you can include an image of the first page of
the fax on the Fax Sent Confirmation report. Press
to highlight
Image on Fax Send Report. Select On from the Image on Fax Send
Report menu.

152

Fax Error Report

Lets you set up fax error reports to print automatically.

Image on Fax
Send Report

If you choose On Fax Send or Send & Receive, and scan your fax to
send from memory, you can include an image of the first page of the fax
to highlight Image on
on the Fax Sent Confirmation report. Press
Fax Send Report. Select On from the Image on Fax Send Report
menu.

Last Transaction

Prints details of the last fax transaction.

Fax Log

Prints summary of last fax transaction.

Speed Dial List

Prints a list of programmed speed dial entries. You can also print this
report by selecting Print Speed Dial List from the Speed Dial Setup
menu.

Caller ID Report

If you subscribe to a caller ID service through your phone provider, this
report prints a list of approximately the last 30 fax calls you received.
The report shows the phone number, date and time, and, depending on

Print reports and forms

NOTE: This feature is not supported in all countries/regions. If it is not
supported in your country/region, Caller ID Report does not appear in
the Print Report menu.
Junk Fax Report

If you subscribe to a caller ID service through your phone provider, and
have designated any numbers as junk fax numbers, this report prints a
list of the phone numbers you have blocked. (The maximum number of
fax numbers you can block varies by model.)
NOTE: This feature is not supported in all countries/regions. If it is not
supported in your country/region, Junk Fax Report does not appear in
the Print Report menu.

Related topics
• “Print fax confirmation reports” on page 150
• “Print fax error reports” on page 151
• “Print the fax log” on page 151
• “Set up speed dialing” on page 65
• “Block junk fax numbers” on page 145

Print forms
The HP All-in-One contains built-in templates that enable you to print common forms,
such as narrow or wide ruled notebook paper, graph paper, task checklists, and music
sheets on plain letter- or A4-size paper.
To print forms from the control panel
1. Make sure you have paper loaded in the input tray.
2. Press Setup.
The Setup menu appears.
3. Press to highlight Printable School Papers, and then press OK.
The Printable School Papers menu appears.
4. Press to highlight the form you want to print, and then press OK.
5. Press or to enter the number of pages you want to print, and then press OK.

Print forms

153

Print reports and forms

the format your phone provider uses to transmit caller ID information,
might include the name of the sender.

Chapter 12

Print reports and forms
154

Print reports and forms

13 Maintain the HP All-in-One
The HP All-in-One requires little maintenance. Sometimes you might want to clean the
glass and lid backing to remove surface dust and ensure that your copies and scans
remain clear. You will also need to replace ink cartridges, clean the print head assembly,
or align the printer from time to time. This section provides instructions for keeping the
HP All-in-One in top working condition. Perform these simple maintenance procedures
as necessary.
•
•
•
•
•
•

Clean the HP All-in-One
Check the estimated ink levels
Work with ink cartridges
Self-maintenance sounds
Reduce energy consumption when the HP All-in-One is off
Turn off the HP All-in-One

Clean the HP All-in-One
To ensure that your copies and scans remain clear, you might need to clean the glass
and lid backing. You might also want to dust the exterior of the HP All-in-One.
TIP: You can purchase an HP Cleaning Kit for Inkjet Printers and All-in-Ones
(Q6260A) that provides everything needed to safely clean your HP device. For more
information, go to: www.hp.com/buy/supplies.
This section contains the following topics:
•
•
•

Clean the glass
Clean the lid backing
Clean the exterior

Clean the glass
Glass that is dirty from fingerprints, smudges, hair, and dust on the main glass surface
slows down performance and affects the accuracy of features such as Fit to Page.
In addition to the main glass surface, you might also need to clean the small glass strip
inside the automatic document feeder. Streaks can occur if the glass strip inside the
automatic document feeder is dirty.

Maintain the HP All-in-One

155

Maintain the HP All-in-One

This section contains the following topics:

Chapter 13

To clean the glass
1. Turn off the HP All-in-One, and raise the lid.
2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.
3. Dry the glass with a dry, soft, lint-free cloth to prevent spotting.
4. Turn on the HP All-in-One.
To clean the glass strip inside the automatic document feeder
1. Turn off the HP All-in-One.
2. Lift the cover of the automatic document feeder.
Maintain the HP All-in-One

3. Lift the automatic document feeder mechanism.

There is a glass strip under the automatic document feeder mechanism.
4. Clean the glass strip with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.

156

Maintain the HP All-in-One

5. Lower the automatic document feeder mechanism, and then close the cover of the
automatic document feeder.
6. Turn on the HP All-in-One.

Clean the lid backing
Minor debris can accumulate on the white document backing located underneath the lid
of the HP All-in-One.

CAUTION: Do not use paper-based wipes, as these might scratch the backing.
4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing)
alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual
alcohol.
CAUTION: Be careful not to spill alcohol on the glass or exterior of the HP Allin-One, as this might damage the device.

Clean the exterior
Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the
case. The interior of the HP All-in-One does not require cleaning. Keep fluids away from
the control panel and the interior of the HP All-in-One.
CAUTION: To avoid damage to the exterior of the HP All-in-One, do not use alcohol
or alcohol-based cleaning products.

Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to
replace an ink cartridge. The ink supply level shows an estimate of the amount of ink
remaining in the ink cartridges.
NOTE: The HP All-in-One can only detect the ink levels for genuine HP ink. The ink
levels in ink cartridges that are refilled or have been used in other devices might not
register accurately.
NOTE: Ink from the cartridges is used in the printing process in a number of different
ways, including in the initialization process, which prepares the device and cartridges
for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing
smoothly. In addition, some residual ink is left in the cartridge after it is used. For more
information, see www.hp.com/go/inkusage.

Check the estimated ink levels

157

Maintain the HP All-in-One

To clean the lid backing
1. Turn off the HP All-in-One, and raise the lid.
2. Clean the white document backing with a soft cloth or sponge slightly moistened with
a mild soap and warm water.
Wash the backing gently to loosen debris. Do not scrub the backing.
3. Dry the backing with a dry, soft, lint-free cloth.

Chapter 13

To check the ink levels from the control panel
1. Press Setup.
2. Press to highlight Tools, and then press OK.
3. Press to highlight Display Ink Gauge, and then press OK.
The HP All-in-One displays a gauge that shows the estimated ink levels of all
cartridges installed.

4. Press any button to return to the Tools menu.
Maintain the HP All-in-One

To check the ink levels from the HP Photosmart Software
1. In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.
NOTE: You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Services tab, and then click
Service this device.
The Printer Toolbox appears.
2. Click the Estimated Ink Level tab.
The estimated ink levels for the ink cartridges appear.

TIP: You can also print a self-test report to see if ink cartridges might need to be
replaced.
Related topics
“Print a self-test report” on page 149

Work with ink cartridges
To ensure the best print quality from the HP All-in-One, you will need to perform some
simple maintenance procedures and, when prompted by a message on the display,
replace the ink cartridges.
This section contains the following topics:
•
•
•
•
•

158

Replace the ink cartridges
Align the printer
Clean the print head
Clean the ink cartridge contacts
Remove ink from your skin and clothing

Maintain the HP All-in-One

Replace the ink cartridges
Follow these instructions when you need to replace ink cartridges.
NOTE: If you are installing ink cartridges in the HP All-in-One for the first time, be
sure to use only the ink cartridges that came with the device. The ink in these
cartridges is specially formulated to mix with the ink in the print head assembly at firsttime setup.

To replace the ink cartridges
1. Make sure the HP All-in-One is turned on.
2. Open the ink cartridge door by lifting from the front center of the device, until the door
locks into place.

3. Squeeze the bottom of the latch below the ink cartridge you want to replace, and then
lift the latch.
If you are replacing the black ink cartridge, lift the latch on the far left.

Work with ink cartridges

159

Maintain the HP All-in-One

If you do not already have replacement ink cartridges for the HP All-in-One, to order
cartridges, go to www.hp.com/buy/supplies. If prompted, choose your country/region,
follow the prompts to select your product, and then click one of the shopping links on the
page.

Chapter 13

If you are replacing one of the five color ink cartridges, such as yellow, light cyan
(blue), cyan, light magenta (pink), or magenta, lift the appropriate latch in the center
area.

Maintain the HP All-in-One

Ink cartridge latch for the black ink cartridge

Ink cartridge latches for the color ink cartridges

4. Pull the ink cartridge toward you out of its slot to remove it.

160

Maintain the HP All-in-One

5. Remove the new ink cartridge from its packaging, and then, holding it by the handle,
push the ink cartridge into the empty slot.
Match the color and pattern of the ink cartridge to the color and pattern on the print
carriage.

6. Close the latch and make sure it is secure.

7. Repeat steps 3 through 6 for each ink cartridge you are replacing.
8. Close the ink cartridge door.

Related topics
“Shop for ink supplies” on page 167

Align the printer
The HP All-in-One automatically aligns the print head when you install the ink cartridges
during the initial setup. The HP All-in-One also aligns the print head during periodic
Work with ink cartridges

161

Chapter 13

maintenance to ensure excellent print quality. You might want to use this feature when
the self-test report shows streaking or white lines through any of the blocks of color.
If you still have print quality problems after aligning the printer, try cleaning the print head.
If print quality problems persist after aligning and cleaning, contact HP support.
To align the printer from the control panel
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. Press Setup.
The Setup menu appears.
3. Press to highlight Tools, and press OK.
The Tools menu appears.
4. Press to highlight Align Printer, and press OK.
5. The HP All-in-One prints a test page, aligns the print head, and calibrates the printer.
Recycle or discard the page.
A success or failure message appears.
Maintain the HP All-in-One

NOTE: If you have colored paper loaded in the input tray when you align the
printer, the alignment will fail. Load unused plain white paper into the input tray,
and then try the alignment again.
If the alignment fails again, you might have a defective sensor or ink cartridge.
Contact HP support. Go to www.hp.com/support. If prompted, choose your
country/region, and then click Contact HP for information on calling for technical
support.
6. Press OK to continue.
To align the printer from the HP Photosmart Software
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.
NOTE: You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Services tab, and then click
Service this device.
The Printer Toolbox appears.
3. Click the Device Services tab.
4. Click Align the Printer.
The HP All-in-One prints a test page, aligns the print head, and calibrates the printer.
Recycle or discard the page.
Related topics
“Clean the print head” on page 162

Clean the print head
Use this feature when the self-test report shows streaking or white lines through any of
the blocks of color. Do not clean the print head unnecessarily, as this wastes ink and
shortens the life of the ink nozzles on the print head.
162

Maintain the HP All-in-One

To clean the print head from the control panel
1. Load letter or A4 unused plain white paper into the input tray.
2. Press Setup.
3. Press to highlight Tools, and then press OK.
4. Press to highlight Clean Printhead, and then press OK.
The HP All-in-One cleans the print head and prints a page that you can recycle or
discard.

NOTE: You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Services tab, and then click
Service this device.
The Printer Toolbox appears.
3. Click the Device Services tab.
4. Click Clean the Print Head.
5. Follow the prompts until you are satisfied with the quality of the output, and then click
Done.
If print quality still seems poor after you clean the print head, try aligning the printer.
If print quality problems persist after cleaning and aligning, contact HP support.
Related topics
“Align the printer” on page 161

Clean the ink cartridge contacts
Clean the copper-colored ink cartridge contacts if all ink cartridges are installed and a
message appears on the display that says a cartridge is missing or damaged.
Before cleaning the ink cartridge contacts, remove the ink cartridge and verify that nothing
is covering the ink cartridge contacts or the ink cartridge slot, then reinstall the ink
cartridge. If you continue to get a message that says a cartridge is missing or damaged,
clean the ink cartridge contacts. If you still get this message after cleaning the contacts,
you will need a replacement ink cartridge. Remove the affected ink cartridge and look at
the end-of-warranty date on the bottom. If it is before the end-of-warranty date, contact
HP support to obtain a replacement ink cartridge.
Make sure you have the following materials available:
•
•

Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart or
leave fibers.
Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the ink cartridges).
CAUTION: Do not use platen cleaners or alcohol to clean the ink cartridge contacts.
These can damage the ink cartridge or the HP All-in-One.

Work with ink cartridges

163

Maintain the HP All-in-One

To clean the print head from the HP Photosmart Software
1. Load letter, A4, or legal unused plain white paper into the input tray.
2. In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.

Chapter 13

To clean the ink cartridge contacts
1. Make sure the HP All-in-One is turned on.
2. Lift the ink cartridge door.
3. Squeeze the bottom of the latch below the ink cartridge you want to clean, and then
lift the latch.
NOTE: Do not remove multiple ink cartridges at the same time. Remove and
clean each ink cartridge one at a time. Do not leave an ink cartridge outside the
HP All-in-One for more than 30 minutes.
4. Inspect the ink cartridge contacts for ink and debris buildup.
5. Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze any
excess water from it.

Maintain the HP All-in-One

NOTE: Hold the ink cartridge by its handle. Do not touch the copper-colored
contacts with your hands or anything other than a foam rubber swab or lint-free
cloth.
6. Clean only the copper-colored contacts.

Copper-colored contacts

7. Place the ink cartridge back into the empty slot and press down on the gray latch until
it clicks into place.
8. Repeat if necessary for the other ink cartridges.
9. Gently close the ink cartridge door.

Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and clothing:

164

Surface

Remedy

Skin

Wash the area with an abrasive soap.

White fabric

Wash the fabric in cold water and use chlorine bleach.

Maintain the HP All-in-One

(continued)
Surface

Remedy

Color fabric

Wash the fabric in cold water and use sudsy ammonia.

CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can
set the ink into the fabric.

Self-maintenance sounds

CAUTION: A message on the display will notify you when the HP All-in-One is
performing maintenance functions. Do not remove power from the device during this
time.

Reduce energy consumption when the HP All-in-One is off
When the HP All-in-One is off, an amount of energy is still being consumed. Energy
consumption can be lessened by enabling the Federal Energy Management Program
(FEMP) mode.
NOTE: When the HP All-in-One is in FEMP mode, it will take longer than usual to
turn back on.
To enable FEMP mode
▲ Press and hold the On button for 3 seconds until the HP All-in-One turns off.

Turn off the HP All-in-One
To avoid damaging the HP All-in-One, you must properly shut it down by using the On
button located on the device. Do not turn the HP All-in-One off by unplugging the power
cord or turning off a power strip.

Self-maintenance sounds

165

Maintain the HP All-in-One

The HP All-in-One will make mechanical noises at various times to perform periodic
maintenance functions, such as replenishing the ink levels in the print head assembly or
cleaning the print head. This is normal operation and is necessary to ensure the HP Allin-One produces the best quality printouts.

Chapter 13

Maintain the HP All-in-One
166

Maintain the HP All-in-One

14 Shop for ink supplies
For a list of ink cartridge numbers, see the printed documentation that came with the
HP All-in-One. You can also use the software that came with the HP All-in-One to find
out the reorder number for all the ink cartridges. You can order ink cartridges online from
the HP Web site. Additionally, you can contact a local HP reseller to find out the correct
ink cartridge reorder numbers for your device and purchase ink cartridges.
To order genuine HP supplies for the HP All-in-One, go to www.hp.com/buy/supplies. If
prompted, choose your country/region, follow the prompts to select your product, and
then click one of the shopping links on the page.
NOTE: Ordering ink cartridges online is not supported in all countries/regions. If it is
not supported in your country/region, contact a local HP reseller for information about
purchasing ink cartridges.
To order ink cartridges from your desktop
▲ Click the Shop for HP Supplies icon on your desktop to connect to HP SureSupply.
You will see a list of original HP printing supplies that are compatible with your device,
as well as options to conveniently purchase the supplies you need (options vary by
country/region).
If you deleted this icon from your desktop, click the Start menu, point to the HP folder,
then click Shop for Supplies.

NOTE: You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Services tab, and then click
Service this device.
2. Click the Estimated Ink Levels tab.
3. Click Ink Cartridge Ordering Information.
The ink cartridge reorder numbers appear.
4. Click Order Online.
HP sends detailed printer information, including model number, serial number, and
ink supply levels, to an authorized online reseller. The supplies you need are
preselected; you can change quantities, add or remove items, and then check out.

Shop for ink supplies

167

Shop for ink supplies

To order HP printing supplies through the HP Solution Center
1. In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.

Chapter 14

Shop for ink supplies
168

Shop for ink supplies

15 Troubleshooting
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•

Troubleshooting tips
Hardware setup troubleshooting
Software installation troubleshooting
Network troubleshooting
Print quality troubleshooting
Print troubleshooting
Memory card and front USB port troubleshooting
Scan troubleshooting
Copy troubleshooting
Fax troubleshooting
Errors

Troubleshooting tips
This section contains the following topics:
•
•
•
•
•
•

Communication problems over a USB connection
Information on ink cartridges and the print head
Information on paper
Tips for using the automatic document feeder
Clear paper jams
Clean the automatic document feeder

Communication problems over a USB connection
NOTE: For information on network communication problems, see “Network
troubleshooting” on page 183. For information on communication problems involving
a memory card, PictBridge camera, or storage device, see “Memory card and front
USB port troubleshooting” on page 208.

•

Look at the display on the HP All-in-One. If the display is blank and the On button is
not lit, the HP All-in-One is turned off. Make sure the power cord is firmly connected
to the HP All-in-One and plugged into a power outlet. Press the On button to turn on
the HP All-in-One.
Check the USB cable. If you are using an older cable, it might not be working properly.
Try connecting it to another product to see if the USB cable works. If you experience
problems, the USB cable might need to be replaced. Also verify that the cable does
not exceed 3 meters (9.8 feet) in length.
Check the connection from the HP All-in-One to your computer. Verify that the USB
cable is securely plugged into the USB port on the back of the HP All-in-One. Make

Troubleshooting

169

Troubleshooting

If the HP All-in-One and computer are USB-connected and are not communicating with
each other, try the following:

Chapter 15

sure the other end of the USB cable is plugged into a USB port on your computer.
After the cable is connected properly, turn the HP All-in-One off and then on again.

•
•
•

•

If you are connecting the HP All-in-One through a USB hub, make sure the hub is
turned on. If the hub is on, try connecting directly to your computer.
Check other printers or scanners. You might need to disconnect older products from
your computer.
Try connecting the USB cable to another USB port on your computer. After you check
the connections, try restarting your computer. Turn the HP All-in-One off and then on
again.
If necessary, remove the software you installed with the HP All-in-One and then install
it again.

For more information, see:
“Uninstall and reinstall the software” on page 181

Information on ink cartridges and the print head
The following tips help maintain HP ink cartridges and ensure consistent print quality.
•
•
•

•
•

Troubleshooting

•

170

Install the ink cartridge on or before the install by date, which is printed on the ink
cartridge package.
Keep all ink cartridges in the original sealed packages until they are needed.
Turn off the HP All-in-One by pressing the On button located on the device. Do not
turn off the device by turning off a power strip or unplugging the power cord from the
HP All-in-One. If you improperly turn off the HP All-in-One, the print head assembly
might not return to the correct position.
Store ink cartridges at room temperature (15.6°-26.6° C or 60°-78° F).
HP recommends that you do not remove the ink cartridges from the HP All-in-One
until you have replacement cartridges available to install.
If you are transporting the HP All-in-One make sure you turn off the device by pressing
the On button to power it down properly. Also, make sure you leave the ink cartridges
installed. Doing these actions will prevent ink leaking from the print head assembly.
Clean the print head when you notice a significant decrease in print quality.

Troubleshooting

•
•

Do not clean the print head unnecessarily. This wastes ink and shortens the life of
the cartridges.
Handle ink cartridges carefully. Dropping, jarring, or rough handling during installation
can cause temporary printing problems.

Information on paper
The HP All-in-One is designed to work well with most paper types. Test a variety of paper
types before buying a large quantity. Find a paper type that works well and is easy to
purchase. HP Premium papers are designed for the best quality results. In addition, follow
these tips:
•
•

•
•
•
•

Do not use paper that is too thin, that has a slick texture, or that stretches easily. It
can feed incorrectly through the paper path, causing paper jams.
Store photo media in its original packaging inside a resealable plastic bag on a flat
surface in a cool, dry place. When you are ready to print, remove only the paper you
plan to use immediately. When you have finished printing, return any unused photo
paper to the plastic bag.
Always hold photo paper by the edges. Fingerprints on photo paper can reduce print
quality.
Do not use paper that is heavily textured. It can cause graphics or text to print
improperly.
Do not combine different paper types and paper sizes in the input tray; the entire stack
of paper in the input tray must be the same size and type.
Store printed photos under glass or in a storage book to prevent bleeding over time
from high humidity. Use HP Premium Plus photo paper for maximum performance.

Tips for using the automatic document feeder
Follow these simple suggestions to avoid common problems when using the automatic
document feeder.
•
•
•
•
•
•
•

Remove any staples or clips from the original document.
Make sure the paper is not too thick or too thin for the HP All-in-One to process.
Do not overload the document feeder tray. The automatic document feeder can hold
up to 50 sheets of letter or A4 paper, or 35 sheets of legal paper.
Do not use spiral or frayed paper. If you must use paper that has been removed from
a spiral binder, trim the edges.
Do not load photos in the automatic document feeder. The automatic document
feeder can damage photos. Always place photos on the glass to scan or copy.
Make sure the paper-width guides in the document feeder tray fit snugly against the
paper without bending the paper.
Load your originals print side up into the document feeder tray.

If the paper was loaded in the input tray, you might need to clear the paper jam from the
rear of the HP All-in-One.

Troubleshooting tips

171

Troubleshooting

Clear paper jams

Chapter 15

Paper can also jam in the automatic document feeder. Several common actions can
cause paper to jam the automatic document feeder:
•
•
•

Placing too much paper in the document feeder tray. The automatic document feeder
can hold up to 50 sheets of letter or A4 paper, or 35 sheets of legal paper.
Using paper that is too thick or too thin for the HP All-in-One.
Trying to add paper to the document feeder tray while the HP All-in-One is feeding
pages.

To clear a paper jam from the Two-sided printing accessory
1. Turn off the HP All-in-One.
2. Press in the tabs on the left and right side of the Two-sided printing accessory.
Remove the accessory by pulling it away from the HP All-in-One.
CAUTION: Trying to clear a paper jam from the front of the HP All-in-One can
damage the print mechanism. Always access and clear paper jams from the Twosided printing accessory of the HP All-in-One.

3. Gently pull the paper out of the rollers.
CAUTION: If the paper tears when you are removing it from the rollers, check
the rollers and wheels for torn pieces of paper that might be remaining inside the
device. If you do not remove all the pieces of paper from the HP All-in-One, more
paper jams are likely to occur.

Troubleshooting

4. If the paper jam is cleared, proceed to step 5.
If the paper jam is not cleared, do the following:
a. Open the Two-sided printing accessory by pulling the tabs up.
b. Remove any paper from inside the accessory.
c. Close the Two-sided printing accessory by pressing the tabs down until they lock
into place.
5. Replace the Two-sided printing accessory. Gently push the accessory forward until
it snaps into place.
6. Turn on the HP All-in-One, and then press OK to continue the current job.

172

Troubleshooting

To clear a paper jam in the automatic document feeder
CAUTION: Do not lift the lid of the HP All-in-One and try to remove the jammed
document from the glass. You might damage your original document.
1. Remove all originals from the document feeder tray.
2. Lift the cover of the automatic document feeder.

3. Lift the automatic document feeder mechanism.

4. Gently pull out any paper that is jammed in the automatic document feeder
mechanism.
CAUTION: If the paper tears when you are removing it, check for torn pieces of
paper that might remain inside the mechanism. If you do not remove all the pieces
of paper from the automatic document feeder, more paper jams are likely to occur.
5. Lower the automatic document feeder mechanism, and then close the cover of the
automatic document feeder.
The cover clicks when it is completely closed.

If the automatic document feeder picks up multiple pages or if it does not pick up plain
paper, you can clean the rollers and separator pad. Lift the automatic document feeder

Troubleshooting tips

173

Troubleshooting

Clean the automatic document feeder

Chapter 15

cover to access the pick assembly inside the automatic document feeder, clean the rollers
or separator pad, and then close the cover.
To clean the rollers or separator pad
1. Remove all originals from the document feeder tray.
2. Lift the automatic document feeder cover.
This provides easy access to the rollers and separator pad, as shown below.

Rollers

Separator pad

3. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess
liquid from the cloth.
4. Use the damp cloth to wipe any residue off the rollers or separator pad.
5. Close the cover of the automatic document feeder.

Hardware setup troubleshooting
This section contains hardware troubleshooting information for the HP All-in-One.
Many issues are caused when the HP All-in-One is connected to the computer using a
USB cable before the HP All-in-One software is installed on the computer. If you
connected the HP All-in-One to your computer before the software installation screen
prompts you to do so, you must follow these steps:
Troubleshooting common setup issues
1. Disconnect the USB cable from the computer.
2. Uninstall the software (if you have already installed it).
3. Restart your computer.
4. Turn off the HP All-in-One, wait one minute, then restart it.
5. Reinstall the HP All-in-One software.
Troubleshooting

CAUTION: Do not connect the USB cable to the computer until prompted by the
software installation screen.

174

Troubleshooting

This section contains the following topics:
•
•
•
•
•
•
•
•

The HP All-in-One will not turn on
I connected the USB cable, but I am having problems using the HP All-in-One with
my computer
The display shows the wrong language
I received a message on the display that the printer alignment failed
The wrong measurements are showing in menus on the display
The HP All-in-One does not print
I received a message on the display to install the Two-sided module
I received a message on the display about a paper jam or a blocked print head
assembly

The HP All-in-One will not turn on
Cause: The HP All-in-One is not properly connected to a power supply.
Solution:
• Make sure the power cord is firmly connected to both the HP All-in-One and the
power adaptor. Plug the power cord into a grounded power outlet, surge protector,
or power strip.

Power connection

Power cord and adaptor

Grounded power outlet

If you are using a power strip, make sure the power strip is on. Or, try plugging
the HP All-in-One directly into a grounded power outlet.
Troubleshooting

•

Hardware setup troubleshooting

175

Chapter 15

•

Test the power outlet to make sure it is working. Plug in an appliance that you
know works, and see if the appliance has power. If not, then there might be a
problem with the power outlet.
If you plugged the HP All-in-One into a switched outlet, make sure the switch is
on. If it is switched to on but still does not work, then there might be a problem
with the power outlet.

Cause:

You pressed the On button too quickly.

Solution: The HP All-in-One might not respond if you press the On button too
quickly. Press the On button once. It might take a few minutes for the HP All-in-One
to turn on. If you press the On button again during this time, you might turn the device
off.
WARNING! If the HP All-in-One still does not turn on, it might have a mechanical
failure. Unplug the HP All-in-One from the power outlet and contact HP. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for
information on calling for technical support.

I connected the USB cable, but I am having problems using the HP All-in-One with
my computer
Cause: The USB cable was connected before the software was installed.
Connecting the USB cable before prompted can cause errors.
Solution: You must first install the software that came with the HP All-in-One before
connecting the USB cable. During installation, do not plug in the USB cable until
prompted by the onscreen instructions.
Once you have installed the software, connecting your computer to the HP All-in-One
with a USB cable is straightforward. Simply plug one end of the USB cable into the
back of your computer and the other into the back of the HP All-in-One. You can
connect to any USB port on the back of your computer.

Troubleshooting
176

Troubleshooting

For more information on installing the software and connecting the USB cable, see
the Setup Guide that came with the HP All-in-One.

The display shows the wrong language
Cause: You might have selected the incorrect language when setting up the HP Allin-One.
Solution: You can change the language settings at any time from the
Preferences menu.
For more information, see:
“Set your language and country/region” on page 25

I received a message on the display that the printer alignment failed
Cause: The incorrect type of paper is loaded in the input tray (for example, colored
paper, paper with text on it or, certain recycled paper).
Solution: Load unused plain white letter or A4 paper into the input tray, and then
try the alignment again.
If the alignment fails again, you might have a defective sensor on the print head
assembly. Contact HP support. Go to www.hp.com/support. If prompted, choose your
country/region, and then click Contact HP for information on calling for technical
support.
For more information, see:
“Align the printer” on page 161

The wrong measurements are showing in menus on the display
Cause: You might have selected the incorrect country/region when setting up the
HP All-in-One. The country/region you select determines the paper sizes shown on
the display.
Solution:

You can change the country/region settings from the Preferences menu.

For more information, see:
“Set your language and country/region” on page 25

The HP All-in-One does not print
Cause: The HP All-in-One and computer are not communicating with each other.
Solution:

Check the connection between the HP All-in-One and computer.
Troubleshooting

For more information, see:
“Communication problems over a USB connection” on page 169
Cause: There might be a problem with one or more of the ink cartridges.
Hardware setup troubleshooting

177

Chapter 15

Solution:

Check that the ink cartridges are installed properly and have ink.

For more information, see:
“Work with ink cartridges” on page 158
Cause:

The HP All-in-One might not be turned on.

The HP All-in-One might be out of paper.
Load paper in the input tray.

For more information, see:
“Load paper” on page 76

I received a message on the display to install the Two-sided module
Cause:

The Two-sided printing accessory is not installed correctly.

Solution: If the Two-sided printing accessory is installed, remove it and reinstall it.
To reinstall it, press the buttons on each side of the accessory and push it into the
rear of the HP All-in-One until it clicks into place.

If the Two-sided printing accessory is not installed, install it at the rear of the HP Allin-One.

I received a message on the display about a paper jam or a blocked print head
assembly
Cause:

The HP All-in-One has a paper jam.

Troubleshooting

Solution: Clear the paper jam, and then follow the prompts on the display or the
computer screen to continue.
For more information, see:
“Clear paper jams” on page 171

178

Troubleshooting

Cause: The print head assembly is blocked.
Solution: There might be some packing material inside the HP All-in-One. Turn the
HP All-in-One off and open the ink cartridge door. Remove any objects that are
blocking the print head assembly (including any packing materials), and then turn the
HP All-in-One on again. Follow the prompts on the display or the computer screen to
continue.

Software installation troubleshooting
Use this section to solve any problems you might encounter while setting up the HP Allin-One software.
This section contains the following topics:
•
•
•
•
•
•
•

When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
The minimum system checks screen appears
A red X appears on the USB connect prompt
I received a message that an unknown error has occurred
The registration screen does not appear
Uninstall and reinstall the software
Missing HP Photosmart Software

When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Cause: The installation failed to run automatically.
Solution:

If the installation does not run automatically, you can start it manually.

To start the installation from a Windows computer
1. From the Windows Start menu, click Run (or click Accessories, and then Run).
2. In the Run dialog box, enter d:\setup.exe, and then click OK.
If your CD-ROM drive is not assigned to drive letter D, enter the appropriate drive
letter.

The minimum system checks screen appears
Cause: Your system does not meet the minimum requirements to install the
software.
Solution: Click Details to see what the specific problem is, and then correct the
problem before attempting to install the software.

A red X appears on the USB connect prompt

Software installation troubleshooting

Troubleshooting

Cause: Normally, a green check appears indicating that the usb connection is
successful. A red X indicates that the usb connection failed.

179

Chapter 15

Solution:
again.

Check that the HP All-in-One is turned on, and then try the usb connection

To retry the usb connection
1. Unplug the HP All-in-One power cord, and then plug it in again.
2. Verify that the USB cable and power cord are plugged in.

3. Click Retry to retry the connection. If this does not work, continue to the next step.
4. Verify that the USB cable is set up properly as follows:
• Unplug the USB cable and plug it in again or try plugging the USB cable into
a different USB port.
• Do not attach the USB cable to a keyboard.
• Verify that the USB cable is 3 meters (9.8 feet) or less in length.
• If you have several USB devices attached to your computer, you might want
to unplug the other devices during the installation.
5. Continue with the installation and restart the computer when prompted.
For more information, see:
“Uninstall and reinstall the software” on page 181

I received a message that an unknown error has occurred
Cause:

The source of the error is unknown.

Solution: Try to continue with the installation. If that does not work, stop and then
restart the installation, and follow the directions on the screen. If an error occurs, you
might need to uninstall and then reinstall the software. Do not simply delete the HP Allin-One application files from your computer. Make sure to remove them properly using
the uninstall utility provided when you installed the software that came with the HP Allin-One.
Troubleshooting

For more information, see:
“Uninstall and reinstall the software” on page 181

180

Troubleshooting

The registration screen does not appear
Cause: The registration screen did not launch automatically.
Solution: You can access the registration (Sign up now) screen from the Windows
taskbar by clicking Start, pointing to Programs or All Programs, HP, Photosmart
C7200 All-in-One series, and then clicking Product Registration.

Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer before
prompted by the software installation screen, you might need to uninstall and then
reinstall the software. Do not simply delete the HP All-in-One application files from your
computer. Make sure to remove them properly using the uninstall utility provided when
you installed the software that came with the HP All-in-One.
To uninstall from a Windows computer, method 1
1. Disconnect the HP All-in-One from your computer. Do not connect the HP All-in-One
to your computer until after you have reinstalled the software.
2. On the Windows taskbar, click Start, Programs or All Programs, HP, Photosmart
C7200 All-in-One series, Uninstall.
3. Follow the onscreen instructions.
4. If you are asked whether you would like to remove shared files, click No.
Other programs that use these files might not work properly if the files are deleted.
5. Restart your computer.
NOTE: It is important that you disconnect the HP All-in-One before restarting
your computer. Do not connect the HP All-in-One to your computer until after you
have reinstalled the software.
6. To reinstall the software, insert the HP All-in-One CD-ROM into your computer’s CDROM drive, and follow the onscreen instructions and the instructions provided in the
Setup Guide that came with the HP All-in-One.
7. After the software is installed, connect the HP All-in-One to your computer.
8. Press the On button to turn the HP All-in-One on.
After connecting and turning on the HP All-in-One, you might have to wait several
minutes for all of the Plug and Play events to complete.
9. Follow the onscreen instructions.
To uninstall from a Windows computer, method 2
NOTE: Use this method if Uninstall is not available in the Windows Start menu.

Software installation troubleshooting

Troubleshooting

1. On the Windows taskbar, click Start, Settings, Control Panel (or just Control
Panel).
2. Double-click Add/Remove Programs (or click Uninstall a program).
3. Select HP Photosmart All-In-One Driver Software, and then click Change/
Remove.
Follow the onscreen instructions.

181

Chapter 15

4. Disconnect the HP All-in-One from your computer.
5. Restart your computer.
NOTE: It is important that you disconnect the HP All-in-One before restarting
your computer. Do not connect the HP All-in-One to your computer until after you
have reinstalled the software.
6. Insert the HP All-in-One CD-ROM into your computer’s CD-ROM drive and then start
the Setup program.
7. Follow the onscreen instructions and the instructions provided in the Setup Guide that
came with the HP All-in-One.
To uninstall from a Windows computer, method 3
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
1. Insert the HP All-in-One CD-ROM into your computer’s CD-ROM drive and then start
the Setup program.
2. Disconnect the HP All-in-One from your computer.
3. Select Uninstall and follow the onscreen directions.
4. Restart your computer.
NOTE: It is important that you disconnect the HP All-in-One before restarting
your computer. Do not connect the HP All-in-One to your computer until after you
have reinstalled the software.
5. Start the Setup program for the HP All-in-One again.
6. Select Install.
7. Follow the onscreen instructions and the instructions provided in the Setup Guide that
came with the HP All-in-One.
Missing HP Photosmart Software
Cause:

The HP Photosmart Software is not installed.

Solution: Install the HP Photosmart Software that came with the HP All-in-One. If
it is installed, restart your computer.
To install the HP Photosmart Software
1. Insert the HP All-in-One CD-ROM into your computer’s CD-ROM drive and then
start the Setup program.
2. When prompted, click Install More Software to install the HP Photosmart
Software.
3. Follow the onscreen instructions and the instructions provided in the Setup Guide
that came with the HP All-in-One.
Troubleshooting

Cause:
Solution:
Cause:
182

Troubleshooting

The HP All-in-One is turned off.
Turn the HP All-in-One on.
The computer is turned off.

Solution:

Turn the computer on.

Cause: The HP All-in-One is not properly connected to the computer.
Solution: Check the connection from the HP All-in-One to your computer. Verify
that the USB cable is securely plugged into the USB port on the back of the HP Allin-One. Make sure the other end of the USB cable is plugged into a USB port on your
computer. After the cable is connected properly, turn the HP All-in-One off and then
on again.

For more information on setting up the HP All-in-One and connecting it to your
computer, see the Setup Guide that came with the HP All-in-One.

Network troubleshooting
This section addresses problems you might encounter while setting up a network.
This section contains the following topics:
•
•

Wired network setup troubleshooting
Wireless setup troubleshooting

Wired network setup troubleshooting
This section addresses problems you might encounter setting up a wired network.
This section contains the following topics:
•
•

The computer is unable to discover the HP All-in-One
The Printer not Found screen appears during installation

The computer is unable to discover the HP All-in-One
Troubleshooting

Cause: Cables are not connected properly.

Network troubleshooting

183

Chapter 15

Solution: Check the following cables to ensure they are connected properly.
• Cables between the HP All-in-One and the hub or router
• Cables between the hub or router and your computer
• Cables to and from your modem or HP All-in-One Internet connection (if
applicable)
Cause:
Solution:

Your computer's Local Area Network card (LAN card) is not set up properly.
Make sure that your LAN card is set up properly.

To check your LAN card (Windows 2000 and XP)
1. Right-click My Computer.
2. In the System Properties dialog box, click the Hardware tab.
3. Click Device Manager.
4. Make sure your card shows up under Network Adapters.
5. Refer to the documentation that came with your card.
To check your LAN card (Windows Vista)
1. On the Windows taskbar, click Start, Computer, and then click Properties.
2. Click Device Manager.
3. Make sure your card shows up under Network Adapters.
4. Refer to the documentation that came with your card.
Cause:
Solution:

You do not have an active network connection.
Check to see if you have an active network connection.

To see if you have an active network connection
▲ Check the two Ethernet indicator lights on the top and bottom of the RJ-45
Ethernet jack on the back of the HP All-in-One. The lights indicate the following:
a. Top light: If this light is a solid green, the device is properly connected to the
network, and communications have been established. If the top light is off,
there is no network connection.
b. Bottom light: This yellow light flashes when data is being sent or received by
the device over the network.

Troubleshooting

To establish an active network connection
1. Check the cable connections from the HP All-in-One to your gateway, router, or
hub to ensure connections are secure.
2. If the connections are secure, turn off the power on the HP All-in-One, and then
turn it on again. Press the On button on the control panel to turn the HP All-inOne off, and press it again to turn the device on. Also, turn off the power on your
router or hub, and then turn it on again.
Cause: You were able to connect the HP All-in-One to the network previously, but
now it will not connect.
184

Troubleshooting

Solution: Turn off the HP All-in-One, the computer, and the router. Wait 30
seconds. Turn on the router first, and then turn on the HP All-in-One and the computer.
Cause: The HP All-in-One and computer are not connected to the same network.
Solution: Try accessing the Embedded Web Server on the HP All-in-One. To find
the IP address, print a network configuration page.
Related topics
• “View and print network settings” on page 49
• “Use the Embedded Web Server” on page 52

The Printer not Found screen appears during installation
Cause: The HP All-in-One is not turned on.
Solution:

Turn on the HP All-in-One.

Cause: You do not have an active network connection.
Solution:

Make sure you have an active network connection.

To make sure your network connection is active
1. If the connections are secure, turn off the power on the HP All-in-One, and then
turn it on again. Press the On button on the control panel to turn the HP All-inOne off, and press it again to turn the device on. Also, turn off the power on your
router or hub, and then turn it on again.
2. Check the cable connections from the HP All-in-One to your gateway, router, or
hub to ensure connections are secure.
3. Make sure the HP All-in-One is connected to the network with a CAT-5 Ethernet
cable.
Cause: Cables are not connected properly.
Solution: Check the following cables to ensure they are connected properly:
• Cables between the HP All-in-One and the hub or router
• Cables between the hub or router and your computer
• Cables to and from your modem or HP All-in-One Internet connection (if
applicable)

Solution: Uninstall the HP All-in-One software, and then reboot your computer.
Temporarily disable anti-virus or anti-spyware applications, and then reinstall the
HP All-in-One software. You can re-enable your anti-virus or anti-spyware
applications after installation is complete. If you see firewall pop-up messages, you
must always accept or allow the pop-up messages.
If the screen still appears, try uninstalling the HP All-in-One software, rebooting your
computer, and temporarily disabling your firewall before reinstalling the HP All-in-One
Network troubleshooting

185

Troubleshooting

Cause: A firewall, anti-virus, or anti-spyware application is preventing the HP Allin-One from accessing your computer.

Chapter 15

software. You can re-enable your firewall application after installation is complete. If
you still see firewall pop-up messages, you must always accept or allow the pop-up
messages.
For more information, see the documentation provided with the firewall software.
Cause: A Virtual Private Network (VPN) is preventing the HP All-in-One from
accessing your computer.
Solution:

Try temporarily disabling the VPN before proceeding with the installation.

NOTE: The HP All-in-One is not accessible during VPN sessions. However, print
jobs are saved in the print queue. When you exit the VPN session, print jobs in
the print queue will be printed.

Wireless setup troubleshooting
This section addresses problems you might encounter setting up a network. Check the
device display for specific error messages.
This section contains the following topics:
•
•
•
•
•
•

During wireless network setup you do not see the SSID (network name) displayed
Weak signal
Cannot connect to network during setup
Invalid WEP key during wireless setup
Invalid passphrase during wireless setup
The Printer Not Found screen appears during installation

During wireless network setup you do not see the SSID (network name)
displayed
Cause: Your wireless router is not broadcasting its network name (SSID) because
the Broadcast SSID option is turned off.
Solution: Access the router's Embedded Web Server and turn on the Broadcast
SSID option. See the user guide that came with your wireless router for information
on how to access the Embedded Web Server and check the Broadcast SSID setting.
For more information, see:
“Connect to an integrated wireless WLAN 802.11 network” on page 40
Cause: The wireless router (infrastructure) or computer (ad hoc) is too far from the
HP All-in-One or there is interference.
Solution: In order to establish a good signal between the HP All-in-One and
wireless router (infrastructure) or computer (ad hoc), you might have to experiment a
Troubleshooting
186

Troubleshooting

bit. Assuming the equipment is functioning properly, try doing the following things
separately or in combination:
• If there is a long distance between your computer or wireless router and the
HP All-in-One, move them closer together.
• If there are metal objects (such as a metal bookcase or refrigerator) in the
transmission path, clear the path between the HP All-in-One and the computer or
wireless router.
• If a cordless telephone, microwave, or other device that emits radio signals
transmitting at 2.4 GHz is nearby, move it farther away to reduce radio
interference.
• If your computer or wireless router is near an external wall, move them away from
the wall.
Cause: Your network name (SSID) may be at the bottom of the SSID list that is
displayed when you install the HP All-in-One on a wireless network.
Solution: Press
first, ad hoc last.

to scroll to the bottom of the list. Infrastructure entries are listed

Cause: An Ethernet cable is connected to the HP All-in-One.
Solution: When an Ethernet cable is plugged into the HP All-in-One, the wireless
radio turns off. Unplug the Ethernet cable.

Weak signal
Cause: The HP All-in-One is too far away from the wireless router or there is
interference.

Cannot connect to network during setup
Cause: The equipment is not turned on.
Solution: Turn on the networked devices, such as the wireless router for an
infrastructure network, or the computer for an ad hoc network. For more information

Network troubleshooting

187

Troubleshooting

Solution: In order to establish a good signal between the HP All-in-One and the
wireless router, you might have to experiment a bit. Assuming the equipment is
functioning properly, try doing the following things separately or in combination:
• If there is a long distance between your computer or wireless router and the
HP All-in-One, move them closer together.
• If there are metal objects (such as a metal bookcase or refrigerator) in the
transmission path, clear the path between the HP All-in-One and the computer or
wireless router.
• If a cordless telephone, microwave, or other device that emits radio signals
transmitting at 2.4 GHz is nearby, move it farther away to reduce radio
interference.
• If your computer or wireless router is near an external wall, move them away from
the wall.

Chapter 15

on how to turn on the wireless router, see the documentation that came with your
wireless router.
Cause:

The HP All-in-One is not receiving a signal.

Solution: Move the wireless router and the HP All-in-One closer together. Then run
the wireless setup again.
For more information, see:
“Integrated wireless WLAN 802.11 network setup” on page 39
Cause: If you manually entered your network name (SSID), you might have entered
it incorrectly.
Solution: Run the wireless setup process again and enter your network name
(SSID) carefully. Remember that the SSID is case-sensitive.
For more information, see:
“Connect to an integrated wireless WLAN 802.11 network” on page 40
Cause:
router.

The setting for MAC address filtering might be enabled on your wireless

Solution: Disable MAC address filtering on your wireless router until the HP All-inOne has successfully connected to your network. If you re-enable MAC address
filtering on your wireless router, make sure the MAC address of the HP All-in-One is
on the list of acceptable MAC addresses.

Invalid WEP key during wireless setup
Cause: If you are using WEP security, you might have entered the WEP key
incorrectly during the wireless setup process.
Solution: During the wireless setup process, you might have entered the WEP key
incorrectly. Some wireless routers provide up to four WEP keys. The HP All-in-One
uses the first WEP key (selected by the wireless router as the default WEP key). Run
the wireless setup process again and be sure to use the first WEP key provided by
the wireless router. Enter the WEP key exactly as it appears in the wireless router
settings. The WEP key is case sensitive.
If you do not know the WEP key, see the documentation that came with your wireless
router for information on how to access the router's Embedded Web Server. You can
find the WEP key by logging onto the router's Embedded Web Server using a
computer on the wireless network.

Invalid passphrase during wireless setup
Troubleshooting

Cause: During the wireless setup process, you might have entered the WPA
passphrase incorrectly.

188

Troubleshooting

Solution: Run the wireless setup process again and enter the correct passphrase.
The passphrase is case-sensitive.

The Printer Not Found screen appears during installation
Cause: A firewall, anti-virus, or anti-spyware application is preventing the HP Allin-One from accessing your computer.
Solution: Uninstall the HP All-in-One software, and then reboot your computer.
Temporarily disable anti-virus or anti-spyware applications, and then reinstall the
HP All-in-One software. You can re-enable your anti-virus or anti-spyware
applications after installation is complete. If you see firewall pop-up messages, you
must always accept or allow the pop-up messages.
If the screen still appears, try uninstalling the HP All-in-One software, rebooting your
computer, and temporarily disabling your firewall before reinstalling the HP All-in-One
software. You can re-enable your firewall application after installation is complete. If
you still see firewall pop-up messages, you must always accept or allow the pop-up
messages.
For more information, see the documentation provided with the firewall software.
Cause: A Virtual Private Network (VPN) is preventing the HP All-in-One from
accessing your computer.
Solution:

Temporarily disable the VPN before proceeding with the installation.

NOTE: The HP All-in-One functionality will be limited during VPN sessions.
Cause: The HP All-in-One is not turned on.
Solution:

Turn on the HP All-in-One.

Print quality troubleshooting
If you are having problems with print quality, try the solutions in this section and observe
the following guidelines:

•

Replace refilled or empty ink cartridges with genuine HP ink cartridges.
Check the device settings to make sure that the print mode and paper selection is
correct for the paper and the task.
For more information, see “Set the paper type for printing” on page 85 and “Choose
papers for printing and copying” on page 73.
Print and evaluate a self-test report.
For more information, see “Print a self-test report” on page 149.
Troubleshooting

•
•

Print quality troubleshooting

189

Chapter 15

•

If the self-test report shows a defect, try the following:
• Clean the ink cartridges automatically. For more information, see “Clean the print
head” on page 162.
• If you are missing lines when you print, clean the electrical contacts. For more
information, see “Clean the ink cartridge contacts” on page 163.
If the self-test report does not show a problem, investigate other causes, such as the
image file or software program.

For additional ink cartridge troubleshooting, visit the HP Web site at www.hp.com/
support.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Ink is bleeding or smearing
The automatic document feeder picks up too many pages or none at all
Ink is not filling the text or graphics completely
The text edges are jagged
The printout has a horizontal band of distortion near the bottom of the page
Colors run into each other on the printout
Printouts have horizontal streaks or lines
Printouts are faded or have dull colors
Printouts seem blurry or fuzzy
Printouts have vertical streaks
Printouts are slanted or skewed
Ink is overspraying the paper when I print a photo
Paper is not picked up from the input tray
The print quality of the fax I received is poor
Some of the pages of a fax I received are faded or blank

Ink is bleeding or smearing
Cause:

The paper type is not suitable for the HP All-in-One.

Solution: Use HP Premium Papers or any other paper type that is appropriate for
the HP All-in-One.
Cause:

The print head needs to be cleaned.

Solution: Clean the print head, and then print a self-test report. Check the color
blocks in the report for any problems. If the color blocks show print quality problems,
perform a printer alignment.
If the problem persists after cleaning and aligning, contact HP support for help. Go
to:
www.hp.com/support
Troubleshooting
190

Troubleshooting

If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
For more information, see:
•
•
•

“Clean the print head” on page 162
“Print a self-test report” on page 149
“Align the printer” on page 161

Cause: The paper is too close to the print head.
Solution: If the paper is too close to the print head during printing, the ink might be
smeared. This can happen if the paper is raised, wrinkled, or very thick, such as a
mailing envelope. Make sure the paper lays flat in the input tray and is not wrinkled.

The automatic document feeder picks up too many pages or none at all
Cause: The separator pad or rollers inside the automatic document feeder might
need to be cleaned. Pencil lead, wax, or ink can build up on the rollers and separator
pad after extensive use, or if you copy handwritten originals or originals that are heavy
with ink.
• If the automatic document feeder does not pick up any pages at all, the rollers
inside the automatic document feeder need to be cleaned.
• If the automatic document feeder picks up multiple pages instead of single sheets,
the separator pad inside the automatic document feeder needs to be cleaned.
Solution: Load one or two sheets of unused plain white full-size paper into the
document feeder tray and press Start Copy Black. As the plain paper passes through
the automatic document feeder, the paper releases and absorbs residue from the
rollers and separator pad.
TIP: If the automatic document feeder does not pick up the plain paper, try
cleaning the front roller. Wipe the roller with a soft lint-free cloth dampened with
distilled water.
If the problem persists, or the automatic document feeder does not pick up the plain
paper, you can clean the rollers and separator pad manually.
For more information, see:
“Clean the automatic document feeder” on page 173

Ink is not filling the text or graphics completely
Cause: The Paper Type setting is incorrect.
Solution: Change the Paper Type setting to match the type of paper loaded in the
input tray.
•
•

Troubleshooting

For more information, see:
“Set the copy paper type” on page 123
“Set the paper type for printing” on page 85

Print quality troubleshooting

191

Chapter 15

Cause:

The copy or print paper type setting is incorrect.

Solution: Load high-quality paper in the input tray and print the image with a high
print quality setting, such as Best, Maximum dpi, or High Resolution. Always make
sure the paper you are printing on is flat. For best results when printing images, use
HP Premium Plus Photo Paper.
If the problem persists, use the software you installed with the HP All-in-One or
another software application to rotate your image 180 degrees so that the light blue,
gray, or brown hues in your image do not print at the bottom of the page.
For more information, see:
“Information on paper” on page 171
Cause:

The print head needs to be cleaned.

“Clean the print head” on page 162
“Print a self-test report” on page 149
“Align the printer” on page 161

Cause:

You are using non-HP ink.

Solution: HP recommends that you use genuine HP ink cartridges. Genuine HP
ink cartridges are designed and tested with HP printers to help you easily produce
great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP ink. Printer
service or repairs required as a result of printer failure or damage attributable to
the use of non-HP ink will not be covered under warranty.

The text edges are jagged
Cause:

The font is a custom size.

Troubleshooting

Solution: Some software applications offer custom fonts that have jagged edges
when enlarged or printed. Also, if you want to print bitmapped text, it might have
jagged edges when enlarged or printed.
Use TrueType or OpenType fonts to ensure that the HP All-in-One is able to print
smooth fonts. When selecting a font, look for the TrueType or OpenType icon.

192

Troubleshooting

The printout has a horizontal band of distortion near the bottom of the page
Cause: Your image has light blue, gray, or brown hues that print near the bottom
of the page.
Solution: Load high-quality paper in the input tray and print the image with a high
print quality setting, such as Best, Maximum dpi, or High Resolution. Always make
sure the paper you are printing on is flat. For best results when printing images, use
HP Premium Plus Photo Paper.
If the problem persists, use the software you installed with the HP All-in-One or
another software application to rotate your image 180 degrees so that the light blue,
gray, or brown hues in your image do not print at the bottom of the page.
For more information, see:
“Information on paper” on page 171

Colors run into each other on the printout
Cause: The print or copy quality setting is set too high for the type of paper loaded
in the HP All-in-One.
Solution: Check the quality setting. Use a lower quality setting to decrease the
amount of ink used for printing or copying.
For more information, see:
•
•

“Change the print speed or quality” on page 86
“Change copy speed or quality” on page 124

Cause: The paper type is not suitable for the HP All-in-One.
Solution: Use HP Premium Papers or any other paper type that is appropriate for
the HP All-in-One.
Cause: You are printing on the wrong side of the paper.
Solution: Load paper with the side you want to print on facing down. For example,
if you are loading glossy photo paper, load the paper with the glossy side down.
For more information, see:
“Load paper” on page 76
Cause: You are using non-HP ink.

NOTE: HP cannot guarantee the quality or reliability of non-HP ink. Printer
service or repairs required as a result of printer failure or damage attributable to
the use of non-HP ink will not be covered under warranty.
Cause: The print head needs to be cleaned.
Print quality troubleshooting

193

Troubleshooting

Solution: HP recommends that you use genuine HP ink cartridges. Genuine HP
ink cartridges are designed and tested with HP printers to help you easily produce
great results, time after time.

Chapter 15

“Clean the print head” on page 162
“Print a self-test report” on page 149
“Align the printer” on page 161

Printouts have horizontal streaks or lines
Cause:
Solution:

The paper is not feeding properly or is loaded incorrectly.
Make sure the paper is loaded correctly.

For more information, see:
“Load full-size paper” on page 76
Cause:

The copy or print paper type setting is incorrect.

The sending fax machine is having problems.
Ask the sender to check their fax machine for any problems.

Cause: The phone line connection is noisy. Phone lines with poor sound quality
(noise) can cause print quality problems.

Troubleshooting

Solution: If the failure was due to noise on the phone line, contact the sender to
have them resend the fax. The quality might be better when you try again. You can
check the sound quality of the phone line by plugging a phone into the telephone wall
jack and listening for static or other noise. If the problem persists, contact your
telephone company.

194

Troubleshooting

Cause: The print head needs to be cleaned.
Solution: Clean the print head, and then print a self-test report. Check the color
blocks in the report for any problems. If the color blocks show print quality problems,
perform a printer alignment.
If the problem persists after cleaning and aligning, contact HP support for help. Go
to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
For more information, see:
•
•
•

“Clean the print head” on page 162
“Print a self-test report” on page 149
“Align the printer” on page 161

Printouts are faded or have dull colors
Cause: The copy or print paper type setting is incorrect.
Solution: Load high-quality paper in the input tray and print the image with a high
print quality setting, such as Best, Maximum dpi, or High Resolution. Always make
sure the paper you are printing on is flat. For best results when printing images, use
HP Premium Plus Photo Paper.
If the problem persists, use the software you installed with the HP All-in-One or
another software application to rotate your image 180 degrees so that the light blue,
gray, or brown hues in your image do not print at the bottom of the page.
For more information, see:
“Information on paper” on page 171
Cause: The paper type is not suitable for the HP All-in-One.
Solution: Use HP Premium Papers or any other paper type that is appropriate for
the HP All-in-One.
Cause: The Lighter/Darker copy setting for the HP All-in-One is set too light.
Solution:

Adjust the lightness and darkness of the copies.

For more information, see:
“Adjust the lightness and darkness of your copy” on page 125

Troubleshooting

Cause: The Paper Type setting is incorrect.

Print quality troubleshooting

195

Chapter 15

Solution: Change the Paper Type setting to match the type of paper loaded in the
input tray.
For more information, see:
•
•

“Set the copy paper type” on page 123
“Set the paper type for printing” on page 85

Cause: Copying a poor-quality picture, such as a newspaper photo, causes bands,
checks, or stripes to appear on your copy. These are called moiré patterns.
Solution: To reduce moiré patterns, try placing one or more clear plastic sheet
protectors directly on the glass, and then place the original print side down on top of
the sheet protectors.
Cause: Debris might be stuck on the glass or on the back of the document lid; this
causes poor copy quality and slows down processing.
Solution:

Clean the glass and the back of the document lid.

For more information, see:
•
•

“Clean the glass” on page 155
“Clean the lid backing” on page 157

Cause:

The print head needs to be cleaned.

“Clean the print head” on page 162
“Print a self-test report” on page 149
“Align the printer” on page 161

Printouts seem blurry or fuzzy
Cause:

The paper type is not suitable for the HP All-in-One.

Solution: Use HP Premium Papers or any other paper type that is appropriate for
the HP All-in-One.
Troubleshooting

Cause:

196

Troubleshooting

The Paper Type setting is incorrect.

Solution: Change the Paper Type setting to match the type of paper loaded in the
input tray.
For more information, see:
•
•

“Set the copy paper type” on page 123
“Set the paper type for printing” on page 85

Cause: The copy or print paper type setting is incorrect.
Solution: Load high-quality paper in the input tray and print the image with a high
print quality setting, such as Best, Maximum dpi, or High Resolution. Always make
sure the paper you are printing on is flat. For best results when printing images, use
HP Premium Plus Photo Paper.
If the problem persists, use the software you installed with the HP All-in-One or
another software application to rotate your image 180 degrees so that the light blue,
gray, or brown hues in your image do not print at the bottom of the page.
For more information, see:
“Information on paper” on page 171
Cause: You are printing on the wrong side of the paper.
Solution: Load paper with the side you want to print on facing down. For example,
if you are loading glossy photo paper, load the paper with the glossy side down.
For more information, see:
“Load paper” on page 76
Cause: The fax sender is using a low resolution or the original was poor quality.
Solution:
original.

Ask the sender to increase the resolution and to verify the quality of the

Printouts have vertical streaks
Cause: The paper type is not suitable for the HP All-in-One.
Solution: Use HP Premium Papers or any other paper type that is appropriate for
the HP All-in-One.
Cause: The glass or automatic document feeder of the sending fax machine is dirty.

Troubleshooting

Solution: If you have vertical lines or streaks on the fax, the sender's fax machine
might have dirt or dust on the glass or automatic document feeder. Check with the
sender to see if the glass or automatic document feeder is clean.

Printouts are slanted or skewed
Cause: The paper is not feeding properly or is loaded incorrectly.

Print quality troubleshooting

197

Chapter 15

Solution:

Make sure the paper is loaded correctly.

For more information, see:
“Load full-size paper” on page 76
Cause:
Solution:

More than one type of paper is loaded in the input tray.
Load only one type of paper at a time.

Cause: The original might have been loaded incorrectly into the sending fax
machine.
Solution:
Cause:

Ask the sender to check that the fax was sent correctly.
The Two-sided printing accessory might not be securely installed.

Solution: Make sure the Two-sided printing accessory on the back of the HP Allin-One is securely installed.

Ink is overspraying the paper when I print a photo
Cause: A small amount (a few millimeters) of overspray is common when making
a copy of a photo. If there are more than a few millimeters of overspray, it might mean
the HP All-in-One thinks the paper loaded is wider than it actually is.

TIP: One way to tell if ink is overspraying the paper is to check the back side of
pages you print after running a copy or print job. If the back side of the page has
ink streaks, the HP All-in-One might have over sprayed your previous copy or print
job.
Solution: Check the paper size setting. Set the paper size to match the paper
loaded in the input tray.
For more information, see:
“Set the copy paper size” on page 122

Paper is not picked up from the input tray
Cause:

There is not enough paper in the input tray.

Solution: If the HP All-in-One is out of paper or there are only a few sheets
remaining, load more paper in the input tray. If there is paper in the input tray, remove
the paper, tap the stack of paper against a flat surface, and reload the paper into the
input tray. Follow the prompts on the display or the computer screen to continue your
print job.
For more information, see:
Troubleshooting

“Load paper” on page 76

198

Troubleshooting

The print quality of the fax I received is poor
Cause: The phone line connection is noisy. Phone lines with poor sound quality
(noise) can cause print quality problems.
Solution: If the failure was due to noise on the phone line, contact the sender to
have them resend the fax. The quality might be better when you try again. You can
check the sound quality of the phone line by plugging a phone into the telephone wall
jack and listening for static or other noise. If the problem persists, contact your
telephone company.
Cause: The sending fax machine is having problems.
Solution:

Ask the sender to check their fax machine for any problems.

Cause: The glass or automatic document feeder of the sending fax machine is dirty.
Solution: If you have vertical lines or streaks on the fax, the sender's fax machine
might have dirt or dust on the glass or automatic document feeder. Check with the
sender to see if the glass or automatic document feeder is clean.
Cause: The print head needs to be cleaned.
Solution: Clean the print head, and then print a self-test report. Check the color
blocks in the report for any problems. If the color blocks show print quality problems,
perform a printer alignment.
If the problem persists after cleaning and aligning, contact HP support for help. Go
to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
For more information, see:
•
•
•

“Clean the print head” on page 162
“Print a self-test report” on page 149
“Align the printer” on page 161

Some of the pages of a fax I received are faded or blank
Cause: The original might have been loaded incorrectly into the sending fax
machine.
Solution:

Ask the sender to check that the fax was sent correctly.

Solution: If the HP All-in-One has only a few sheets remaining, load more paper in
the input tray. If there is plenty of paper in the input tray, remove the paper, tap the
stack of paper against a flat surface, and reload the paper into the input tray.
Cause: The paper loaded in the input tray is not suitable for your fax.

Print quality troubleshooting

199

Troubleshooting

Cause: The HP All-in-One picked up two sheets of paper while printing the fax.

Chapter 15

Solution: If the paper you are using is too fibrous, the ink applied by the HP All-inOne might not fully cover the surface of the paper. Use HP Premium Papers or any
other paper type that is appropriate for the HP All-in-One.
Cause:

The print head needs to be cleaned.

“Clean the print head” on page 162
“Print a self-test report” on page 149
“Align the printer” on page 161

Print troubleshooting
Use this section to solve these printing problems:
•
•
•
•
•
•
•
•
•
•
•

Envelopes print incorrectly
Borderless printing produces unexpected results
The HP All-in-One is not responding
The HP All-in-One prints meaningless characters
Nothing happens when I try to print
The pages in my document came out in the wrong order
The margins are not printing as expected
Text or graphics are cut off at the edge of the page
A blank page came out while printing
Ink is spraying the inside of the HP All-in-One when I print a photo
Option for automatic two-sided printing cannot be selected

Envelopes print incorrectly
Cause:

A stack of envelopes is loaded incorrectly.

Solution: Remove all paper from the input tray. Load a stack of envelopes in the
input tray, with the envelope flaps facing up and to the left.
Troubleshooting

NOTE: To avoid paper jams, tuck the flaps inside the envelopes.

200

Troubleshooting

Cause: The wrong type of envelope is loaded.
Solution: Do not use shiny or embossed envelopes or envelopes that have clasps
or windows.

Borderless printing produces unexpected results
Cause: Printing a borderless image from a non-HP software application produces
unexpected results.
Solution: Try printing the image from the photo imaging software that came with
the HP All-in-One.

The HP All-in-One is not responding
Cause: The Two-sided printing accessory is not installed correctly.
Solution: If the Two-sided printing accessory is installed, remove it and reinstall it.
To reinstall it, press the buttons on each side of the accessory and push it into the
rear of the HP All-in-One until it clicks into place.
If the Two-sided printing accessory is not installed, install it at the rear of the HP Allin-One.
Cause: The HP All-in-One is busy with another task.
Solution: If the HP All-in-One is performing another task such as copying or
scanning, your print job will be delayed until the HP All-in-One completes the current
task.
Some documents take a long time to print. If nothing has printed several minutes after
you sent a print job to the HP All-in-One, check your computer to see if there are any
messages.
Cause: The HP All-in-One has a paper jam.
Clear the paper jam.

Troubleshooting

Solution:

For more information, see:
“Clear paper jams” on page 171

Print troubleshooting

201

Chapter 15

Cause:
Solution:

The HP All-in-One is out of paper.
Load paper in the input tray.

For more information, see:
“Load paper” on page 76
Cause:

The print head assembly has stalled.

Solution: Turn the HP All-in-One off and open the ink cartridge door. Remove any
objects that are blocking the print head assembly (including any packing materials),
and then turn the HP All-in-One on again.
Cause:

The computer is not communicating with the HP All-in-One.

Solution: If the HP All-in-One is not properly connected to the computer,
communication errors can occur. Make sure the USB cable is connected to the HP Allin-One and the computer as shown below.

If the connections are secure, and nothing has printed several minutes after you sent
a print job to the HP All-in-One, check the status of the HP All-in-One. In the
HP Photosmart Software, click Status.
For more information, see:
“I connected the USB cable, but I am having problems using the HP All-in-One with
my computer” on page 176
Cause:

The HP All-in-One is turned off.

Solution: Look at the On button located on the top of the HP All-in-One. If it is not
lit, the HP All-in-One is turned off. Make sure the power cord is firmly connected to
the HP All-in-One and plugged into a power outlet. Press the On button to turn on the
HP All-in-One.
Troubleshooting

Cause:

The HP All-in-One experienced an error.

Solution: Turn the HP All-in-One off, and then unplug the power cord. Plug the
power cord back in, and then press the On button to turn on the HP All-in-One.

202

Troubleshooting

Cause: The status of the printer driver has changed.
Solution:
printing.

The printer driver status might have changed to either offline or stop

To check the printer driver status
1. In the HP Solution Center, click the device tab.
2. Click Settings.
3. Click Status.
If the status is offline or stop printing, change the status to ready.
Cause: A deleted print job is still in the queue.
Solution: A print job might remain in the queue after it has been cancelled. The
cancelled print job jams the queue and prevents the next print job from printing.
From your computer, open the printer folder and see if the cancelled job remains in
the print queue. Try to delete the job from the queue. If the print job remains in the
queue, try one or both of the following:
•
•

Disconnect the USB cable from the HP All-in-One, restart the computer, and then
reconnect the USB cable to the HP All-in-One.
Shut down the HP All-in-One, restart the computer, and then restart the HP Allin-One.

The HP All-in-One prints meaningless characters
Cause: There is no more available memory in the HP All-in-One.
Solution: Turn off the HP All-in-One and your computer for 60 seconds, then turn
them both on and try printing again.
Cause: The document is corrupt.
Solution: Try printing another document from the same software application. If this
works, then try printing a previously saved version of the document that is not corrupt.

Nothing happens when I try to print
Cause: The HP All-in-One is turned off.

Cause: The HP All-in-One is busy with another task.
Solution: If the HP All-in-One is performing another task such as copying or
scanning, your print job will be delayed until the HP All-in-One completes the current
task.

Print troubleshooting

203

Troubleshooting

Chapter 15

Some documents take a long time to print. If nothing has printed several minutes after
you sent a print job to the HP All-in-One, check your computer to see if there are any
messages.
Cause:

The HP All-in-One is not the selected printer.

Solution: Make sure the HP All-in-One is the selected printer in your software
application.

TIP: You can set the HP All-in-One as the default printer to ensure that the printer
is automatically selected when you select Print in the File menu of your different
software applications.
Cause:

The computer is not communicating with the HP All-in-One.

Solution: If the HP All-in-One is not properly connected to the computer,
communication errors can occur. Make sure the USB cable is connected to the HP Allin-One and the computer as shown below.

The HP All-in-One has a paper jam.
Clear the paper jam.

For more information, see:
Troubleshooting

“Clear paper jams” on page 171
Cause:

204

Troubleshooting

The print head assembly has stalled.

Load paper in the input tray.

For more information, see:
“Load paper” on page 76

The pages in my document came out in the wrong order
Cause: The print settings are set to print the first page of your document first.
Because of the way the paper feeds through the HP All-in-One, this means the first
page will be print side up at the bottom of the stack.
Solution: Print the document in reverse order. When the document finishes
printing, the pages will be in correct order.
For more information, see:
“Print a multiple-page document in reverse order” on page 95

The margins are not printing as expected
Cause: The margins are not set correctly in your software application.
Solution:

Check the printer margins.

Make sure the margin settings for the document do not exceed the printable area of
the HP All-in-One.
To check your margin settings
1. Preview your print job before sending it to the HP All-in-One.
2. Check the margins.
The HP All-in-One uses the margins you have set in your software application,
as long as they are greater than the minimum margins the HP All-in-One supports.
3. Cancel the print job if the margins are not satisfactory, and then adjust the margins
in your software application.
Cause: The paper size setting might not be set correctly for the project you are
printing.
Solution: Verify that you have selected the proper paper size setting for your
project. Make sure that you have loaded the correct paper size in the input tray.
Troubleshooting

Cause: The paper guides are not positioned correctly.

Print troubleshooting

205

Chapter 15

Solution: Remove the stack of paper from the input tray, reload the paper, and then
slide the paper width guide inward until it stops at the edge of the paper.
For more information, see:
“Load paper” on page 76
Cause:

A stack of envelopes is loaded incorrectly.

Solution: Remove all paper from the input tray. Load a stack of envelopes in the
input tray, with the envelope flaps facing up and on the left.
NOTE: To avoid paper jams, tuck the flaps inside the envelopes.

For more information, see:
“Load envelopes” on page 80

Text or graphics are cut off at the edge of the page
Cause:

The margins are not set correctly in your software application.

Solution:
To check your margin settings
1. Preview your print job before sending it to the HP All-in-One.
2. Check the margins.
The HP All-in-One uses the margins you have set in your software application,
as long as they are greater than the minimum margins the HP All-in-One supports.
3. Cancel the print job if the margins are not satisfactory, and then adjust the margins
in your software application.
Make sure the margin settings for the document do not exceed the printable area of
the HP All-in-One.
Troubleshooting

Cause: The size of the document you are printing is larger than the paper loaded
in the input tray.

206

Troubleshooting

Solution: Make sure the layout of the document you are trying to print fits on a paper
size supported by the HP All-in-One.
To preview the print layout
1. Load the correct paper size into the input tray.
2. Preview your print job before sending it to the HP All-in-One.
3. Check the graphics in the document to make sure that the current size fits within
the printable area of the HP All-in-One.
4. Cancel the print job if the graphics do not fit in the printable area of the page.
TIP: Some software applications allow you to scale the document to fit the paper
size currently selected. Additionally, you can scale the size of a document from
the print Properties dialog box.
Cause: The paper is loaded incorrectly.
Solution:

If the paper is misfeeding, it could cause parts of the document to cut off.

Remove the stack of paper from the input tray, and then reload the paper following
the steps below.
For more information, see:
“Load paper” on page 76

A blank page came out while printing
Cause: The document you are printing contains an additional blank page.
Solution: Open the document file in your software application and remove any extra
pages or lines at the end of the document.
Cause: The HP All-in-One picked up two sheets of paper.
Solution: If the HP All-in-One has only a few sheets remaining, load more paper in
the input tray. If there is plenty of paper in the input tray, remove the paper, tap the
stack of paper against a flat surface, and reload the paper into the input tray.
For more information, see:
“Load paper” on page 76

Ink is spraying the inside of the HP All-in-One when I print a photo
Cause: The borderless print settings require photo paper to be loaded in the input
tray. You are using the wrong paper type.

Option for automatic two-sided printing cannot be selected
Cause: The Two-sided printing accessory is not installed or it is installed incorrectly.
Print troubleshooting

207

Troubleshooting

Solution: Make sure you load photo paper in the input tray before you print a
borderless print job.

Chapter 15

Solution: Firmly insert the Two-sided printing accessory into the back of the device
until both sides snap into place.
NOTE: Do not press the buttons on either side of the accessory when installing
it. Use the buttons only when removing the accessory from the device.
Cause: The selected paper type and paper size might not be supported by the Twosided printing accessory.
Solution: Make sure the selected paper type and size are compatible with the Twosided printing accessory. For more information, see “Technical information”
on page 287.

Memory card and front USB port troubleshooting
Use this section to solve these memory card problems:
•
•
•
•
•
•
•
•
•
•

My memory card no longer works in my digital camera
The HP All-in-One does not read the memory card or storage device
The Photo light next to the memory card slots is blinking
The Attention light blinks when I insert my memory card or storage device
The photos on the memory card or storage device do not transfer to my computer
Memory card or storage device is not available
Photos in a connected digital camera with PictBridge do not print
The file name appears as meaningless text
Other users on the network can access my memory card or storage device
Error message: Cannot find the file or item. Make sure the path and file name are
correct.

My memory card no longer works in my digital camera
Cause: You formatted the card on a Windows XP computer. By default, Windows
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.
Solution: Reformat your memory card in your camera or format your memory card
in a Windows XP computer by selecting the FAT format.

The HP All-in-One does not read the memory card or storage device
Cause:

The card is inserted backwards or upside down.

Troubleshooting

Solution: Turn the memory card so that the label side is on the left and the contacts
are on the right (and facing the device), and then push the card forward into the
appropriate slot until the Photo light turns on.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the Photo light (near the memory card slots) will not turn on.

208

Troubleshooting

After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.
Cause: The memory card or storage device is not fully inserted.
Solution: Make sure you fully insert the memory card into the appropriate slot on
the HP All-in-One. Or, if you are using a storage device such as a keychain drive,
make sure you fully insert the storage device into the front USB port.
If the memory card or storage device is not inserted properly, the HP All-in-One will
not respond and the Photo light (near the memory card slots) will not turn on.
After a memory card or storage device has been inserted properly, the Photo light will
blink for a few seconds, and then remain lit.
Cause: You have inserted more than one memory card, or you have an inserted a
memory card and a storage device at the same time.
Solution: If you have inserted more than one memory card, remove one of the
memory cards. You can use only one memory card at a time.
If you have a memory card and a storage device connected, remove the storage
device. You can use only one at a time.
Cause: The file system is corrupted.
Solution: Check the display for an error message telling you about the problem and
how to solve it.
If the file system on the card is corrupt, reformat the memory card in your digital
camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.

The Photo light next to the memory card slots is blinking
Cause: The HP All-in-One is reading the memory card.
Solution: Do not pull out the memory card while the Photo light is flashing. A
flashing light means the HP All-in-One is accessing the memory card. Wait until the
light remains solid. Removing a memory card while it is being accessed might corrupt
information on the card or damage the HP All-in-One and card.

Cause: The HP All-in-One has detected an error with the memory card.
Solution: Remove and reinsert the memory card. You might have inserted it
incorrectly. Turn the memory card so that the label side is on the left and the contacts

Memory card and front USB port troubleshooting

209

Troubleshooting

The Attention light blinks when I insert my memory card or storage device

Chapter 15

are on the right (and facing the device), and then push the card forward into the
appropriate slot until the Photo light turns on.
If the problem continues, the memory card might be defective.
Cause: You have inserted more than one memory card, or you have an inserted a
memory card and a storage device at the same time.
Solution: If you have inserted more than one memory card, remove one of the
memory cards. You can use only one memory card at a time.
If you have a memory card and a storage device connected, remove either the
memory card or the storage device. You can use only one at a time.

The photos on the memory card or storage device do not transfer to my computer
Cause:

The HP Photosmart Software is not installed.

The HP All-in-One is turned off.
Turn the HP All-in-One on.
The computer is turned off.
Turn the computer on.
The HP All-in-One is not properly connected to the computer.

Solution: If the HP All-in-One is directly connected to a computer with a USB cable,
check the physical connection from the HP All-in-One to the computer. Verify that the
USB cable is securely plugged into the USB port on the back of the HP All-in-One.
Make sure the other end of the USB cable is plugged into a USB port on your
computer. After the cable is connected properly, turn the HP All-in-One off and then
on again.
Troubleshooting
210

Troubleshooting

If the HP All-in-One is network-connected, check physical network connections and
make sure the network is operational. Once you verify network connectivity, retry the
task.
For more information, see:
•
•

“Communication problems over a USB connection” on page 169
“Network troubleshooting” on page 183

Memory card or storage device is not available
Cause: If this message appears on your display, it means that another user is
accessing the memory card or storage device over the network. Other users who try
to use the same memory device might see a read/write error message. The memory
device might not appear, as expected, in a list of shared network drives. In addition,
if the HP All-in-One is connected to your computer by a USB cable, the computer
might be accessing the memory card or storage device, making it inaccessible to the
HP All-in-One.
Solution:
device.

Wait until the other user has finished using the memory card or storage

Photos in a connected digital camera with PictBridge do not print
Cause: The digital camera is not in PictBridge mode.
Solution: If the camera supports PictBridge, make sure the camera is set to
PictBridge mode. See the user guide that came with the camera for instructions on
how to do this.
Cause: The images are not in a supported format.
Solution: Make sure the digital camera is saving photos in a file format that the
PictBridge transfer feature supports (exif/JPEG, JPEG, and DPOF).
Cause: You did not select any photos on the camera for printing.
Solution: Before you connect the digital camera to the front USB port on the HP Allin-One, select some photos on the camera for printing.
NOTE: Some digital cameras do not allow you to select photos until after you
have established a PictBridge connection. If this is the case, connect your digital
camera to the front USB port, turn on the camera and change it to PictBridge
mode, and then use the camera to select the photos you want to print.

Cause: The HP All-in-One does not support Unicode. This is a limitation of the
Common Internet File System (CIFS) server.
The CIFS server is included in all network-connected HP All-in-One devices. It
provides network drive letter access to the memory card or storage device in the
Memory card and front USB port troubleshooting

211

Troubleshooting

The file name appears as meaningless text

Chapter 15

HP All-in-One. This lets you read/write files on the network from the memory card or
storage device in the HP All-in-One. The CIFS server appears on your computer as
a network drive. In addition to reading/writing files from your memory card or storage
device, you can also create folders and store other information.
Solution: If a file name was created with Unicode by another application, it will
display as arbitrary characters.

Other users on the network can access my memory card or storage device
Cause: The Common Internet File System (CIFS) server in the HP All-in-One does
not support authentication. This is a limitation of the CIFS server.
The CIFS server is included in all network-connected HP All-in-One devices. It
provides network drive letter access to the memory card or storage device in the
HP All-in-One. This lets you read/write files on the network from the memory card or
storage device in the HP All-in-One. The CIFS server appears on your computer as
a network drive. In addition to reading/writing files from your memory card or storage
device, you can also create folders and store other information.
Solution:
device.

Every user on the network can access the memory card or storage

Error message: Cannot find the file or item. Make sure the path and file name are
correct.
Cause: The Common Internet File System (CIFS) server in the HP All-in-One is not
operational.
The CIFS server is included in all network-connected HP All-in-One devices. It
provides network drive letter access to the memory card or storage device in the
HP All-in-One. This lets you read/write files on the network from the memory card or
storage device in the HP All-in-One. The CIFS server appears on your computer as
a network drive. In addition to reading/writing files from your memory card or storage
device, you can also create folders and store other information.
Solution:

Retry your task at a later time.

Scan troubleshooting
Use this section to solve these scan problems:

Troubleshooting

•
•
•
•
•
•
•
•

212

Scan halts
Scan fails
Scan fails because of insufficient computer memory
Scanned image is blank
Scanned image is incorrectly cropped
Scanned image has incorrect page layout
Scanned image shows dotted lines instead of text
Text format is incorrect

Troubleshooting

•
•

Text is incorrect or missing
The scan feature does not work

Scan halts
Cause: The computer system resources might be low.
Solution: Turn off the HP All-in-One and then turn it back on. Turn off the computer
and then turn it back on.
If this does not work, try changing the scan to a lower resolution.

Scan fails
Cause: The computer is not turned on.
Solution:

Turn on your computer.

Cause: Your computer is not connected to the HP All-in-One by a USB cable or
network cable.
Solution: Connect your computer to the HP All-in-One with a standard USB cable
or across a network.
Cause: The HP All-in-One software might not have been installed.
Solution:

Insert the HP All-in-One installation CD and install the software.

Cause: The software you installed with the HP All-in-One is not running.
Solution:
again.

Open the software you installed with the HP All-in-One and try scanning

Scan fails because of insufficient computer memory
Cause: Too many programs are running on your computer.
Solution: Close all programs that are not in use. This includes programs that run
in the background, such as screen savers and virus checkers. If you turn off your virus
checker, remember to turn it back on after you finish your scan.
If this does not work, it might help to restart your computer. Some programs do not
release memory when you close them. Restarting your computer will clear the
memory.

Troubleshooting

If this problem occurs frequently, or if you encounter memory problems while using
other programs, you might need to add more memory to your computer. See the user
guide that came with your computer for more information.

Scanned image is blank
Cause: The original is placed incorrectly on the glass.

Scan troubleshooting

213

Chapter 15

Solution:

Load your original print side down on the right front corner of the glass.

Scanned image is incorrectly cropped
Cause:

The software is set to automatically crop scanned pictures.

Solution: The Autocrop feature crops anything that is not part of the main image.
Sometimes this might not be what you want. In that case, you can turn off
autocropping and crop the scanned image manually, or not at all.

Scanned image has incorrect page layout
Cause:
Solution:

Automatic cropping is changing the page layout.
Turn off automatic cropping to retain the page layout.

Scanned image shows dotted lines instead of text
Cause: If you use the Text image type to scan text that you plan to edit, the scanner
might not recognize color text. The Text image type scans at 300 x 300 dpi, in black
and white.
If you are scanning an original that has graphics or artwork surrounding the text, the
scanner might not recognize the text.
Solution:

Make a black-and-white copy of the original and then scan the copy.

Text format is incorrect
Cause:

The scan document settings are incorrect.

Solution: Some applications cannot handle framed text formatting. Framed text is
one of the scan document settings. It maintains complex layouts, such as multiple
columns from a newsletter, by putting the text in different frames (boxes) in the
destination application.

Troubleshooting

Text is incorrect or missing
Cause:
Solution:

214

Troubleshooting

The brightness is not set correctly.
Adjust the brightness, and then rescan the original.

Cause: Debris might be stuck on the glass or on the back of the document lid. This
can cause poor-quality scans.
Solution:

Clean the glass and lid backing.

For more information, see:
•
•

“Clean the lid backing” on page 157
“Clean the glass” on page 155

Cause: The scan document settings are not set to the correct optical character
recognition (OCR) language. The OCR language tells the software how to interpret
the characters it sees in the original image. If the OCR language does not match the
language in the original, the scanned text might be incomprehensible.
Solution:

Select the correct OCR language.

NOTE: If you are using HP Photosmart Essential, the Optical Character
Recognition (OCR) software might not be installed on your computer. To install
the OCR software, you must re-insert the software disk and select OCR under the
Custom installation options.

The scan feature does not work
Cause: The computer is turned off.
Solution:

Turn the computer on.

Cause: The HP All-in-One is not properly connected to the computer through a USB
cable.
Solution:

Check the cables that connect the HP All-in-One to your computer.

Cause: The software that came with the HP All-in-One is not installed or is not
running.
Solution: Restart your computer. If that does not help, install or reinstall the
software that came with the HP All-in-One.

Copy troubleshooting
Use this section to solve these copy problems:
Copies are too light or too dark
Nothing happens when I try to copy
Parts of the original do not appear or are cut off
Fit to Page is not working as expected
A borderless copy has white space around the edges
The image is cropped when I make a borderless copy
The printout is blank

Troubleshooting

•
•
•
•
•
•
•

Copy troubleshooting

215

Chapter 15

Copies are too light or too dark
Cause:
Solution:

The Lighter/Darker setting for the HP All-in-One is set too light or too dark.
Adjust the lightness and darkness of the copies.

For more information, see:
“Adjust the lightness and darkness of your copy” on page 125
Cause:
Solution:

The original you are copying is overexposed.
Try using Enhancements to improve an overexposed image.

For more information, see:
“Improve the quality of a copy” on page 129

Nothing happens when I try to copy
Cause:

The HP All-in-One is turned off.

The original is placed incorrectly on the glass.
Load the original on the glass.

For more information, see:
“Load an original on the glass” on page 72.
Cause:
Solution:
Cause:

The HP All-in-One might be busy copying or printing.
Check the display to see if the HP All-in-One is busy.
The HP All-in-One does not recognize the paper type.

Solution: Do not use the HP All-in-One to copy onto envelopes or other papers the
HP All-in-One does not support.
Cause:
Solution:
in-One.

The HP All-in-One has a paper jam.
Clear the paper jam and remove any torn paper that remains in the HP All-

For more information, see:
“Clear paper jams” on page 171
Troubleshooting

Parts of the original do not appear or are cut off
Cause:

216

Troubleshooting

The original is placed incorrectly on the glass.

Solution: Reload the original on the glass.
For more information, see:
“Load originals” on page 71
Cause: The original fills the entire sheet.
Solution: If the image or text on your original fills the entire sheet with no margins,
use the Fit to Page feature to reduce your original and prevent unwanted cropping
of the text or images at the edges of the sheet.
For more information, see:
“Resize an original to fit onto letter or A4 paper” on page 127
Cause: The original is larger than the paper in the input tray.
Solution: If your original is larger than the paper in the input tray, use the Fit to
Page feature to reduce your original to fit on the paper in the input tray.
For more information, see:
“Resize an original to fit onto letter or A4 paper” on page 127

Fit to Page is not working as expected
Cause: You are trying to increase the size of an original that is too small.
Solution: Fit to Page can only enlarge the original up to the maximum percentage
allowed by your model. (The maximum percentage varies by model.) For example,
200% might be the maximum enlargement percentage allowed by your model.
Enlarging a passport photo by 200% might not enlarge it enough for it to fit a full-size
page.
If you want to make a large copy of a small original, scan the original into the computer,
resize the image in the HP scanning software, and then print a copy of the enlarged
image.
Cause: The original is placed incorrectly on the glass.
Solution: Reload the original on the glass.
For more information, see:
“Load originals” on page 71
Cause: Debris might be stuck on the glass or on the back of the document lid. The
HP All-in-One interprets anything it detects on the glass as part of the image.
Solution: Turn off the HP All-in-One, and then use a soft cloth to wipe the glass
and the back of the document lid.
•
•

Troubleshooting

For more information, see:
“Clean the glass” on page 155
“Clean the lid backing” on page 157

Copy troubleshooting

217

Chapter 15

A borderless copy has white space around the edges
Cause:

You are trying to make a borderless copy of an original that is too small.

Solution: When you make a borderless copy of a small original, the HP All-in-One
enlarges the original up to a maximum percentage. This might leave white space
around the edges. (The maximum percentage varies by model.)
Depending on the size of the borderless copy you are trying to make, the minimum
size of the original varies. For example, you cannot enlarge a passport photo to create
a letter-size borderless copy.
If you want to make a borderless copy of a very small original, scan the original into
the computer, resize the image in the HP scanning software, and then print a
borderless copy of the enlarged image.
Cause:
Solution:

You are trying to make a borderless copy without using photo paper.
Use photo paper to make borderless copies.

For more information, see:
“Make a borderless copy of a photo” on page 126
Cause: Debris might be stuck on the glass or on the back of the document lid. The
HP All-in-One interprets anything it detects on the glass as part of the image.
Solution: Turn off the HP All-in-One, and then use a soft cloth to wipe the glass
and the back of the document lid.
For more information, see:
•
•

“Clean the glass” on page 155
“Clean the lid backing” on page 157

The image is cropped when I make a borderless copy
Cause: The HP All-in-One cropped some of the image around the margins of the
copy to achieve a borderless print without changing the proportions of the original.
Solution: If you want to enlarge a photo to fit a full-size page without cropping the
edges, use Fit to Page.
For more information, see:
•
•

“Resize an original to fit onto letter or A4 paper” on page 127
“Resize an original using custom settings” on page 127

Cause:

The original is larger than the paper in the input tray.

Solution: If your original is larger than the paper in the input tray, use the Fit to
Page feature to reduce your original to fit on the paper in the input tray.
Troubleshooting

For more information, see:
“Resize an original to fit onto letter or A4 paper” on page 127

218

Troubleshooting

The printout is blank
Cause: The original is placed incorrectly on the glass.
Solution: Reload the original on the glass.
For more information, see:
“Load originals” on page 71

Fax troubleshooting
Use this section to solve the following fax problems:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

The HP All-in-One is having problems sending and receiving faxes
The HP All-in-One cannot send faxes, but can receive faxes
The HP All-in-One is having problems sending a manual fax
Pages of a fax I sent are missing
The quality of the fax I sent is poor
Parts of a fax I sent are cut off
The fax I sent was blank when it was received
Fax transmission is slow
The HP All-in-One cannot receive faxes, but can send faxes
The HP All-in-One is having problems receiving a manual fax
Fax tones are recorded on my answering machine
The HP All-in-One is not answering incoming fax calls
Pages of a fax I received are missing
Faxes are received but do not print
Parts of a fax I received are cut off
The computer to which I am connecting has only one phone port
I hear static on my telephone line since connecting the HP All-in-One
The fax test failed
I am having problems faxing over the Internet using IP phone
The fax log report shows an error

The HP All-in-One is having problems sending and receiving faxes
Cause: The HP All-in-One is not set up properly for faxing.
Solution: Follow the instructions in your printed documentation to set up the HP Allin-One properly for faxing, based on the equipment and services you have on the
same phone line as the HP All-in-One. Then, run a fax test to check the status of the
HP All-in-One and to make sure you set it up properly.
The HP All-in-One prints a report with the results of the test. If the test fails, review
the report for information on how to fix the problem.
Troubleshooting

For more information, see:
“Test your fax setup” on page 63
Cause: The HP All-in-One is turned off.
Fax troubleshooting

219

Chapter 15

Solution: Look at the display on the HP All-in-One. If the display is blank and the
On button is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly
connected to the HP All-in-One and plugged into a power outlet. Press the On button
to turn on the HP All-in-One.
Cause: The wrong phone cord is used to connect the HP All-in-One or the phone
cord is plugged into the wrong port.
Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.
Make sure you used the phone cord supplied in the box with the HP All-in-One to
connect to the telephone wall jack. One end of this special 2-wire phone cord should
be connected to the port labeled 1-LINE on the back of the HP All-in-One and the
other end to your telephone wall jack, as shown below.

Telephone wall jack

Use the phone cord supplied in the box with the HP All-in-One

This special 2-wire phone cord is different from the more common 4-wire phone cords
you might already have in your office. Check the end of the cord and compare it to
the two types of cords shown below.

Troubleshooting
220

Troubleshooting

If you used a 4-wire phone cord, disconnect it, find the supplied 2-wire phone cord,
and then connect the 2-wire phone cord to the port labeled 1-LINE on the back of the
HP All-in-One.
If the HP All-in-One came with a 2-wire phone cord adaptor, you can use it with a 4wire phone cord, in case the supplied 2-wire phone cord is too short. Attach the 2wire phone cord adaptor to the port labeled 1-LINE on the back of the HP All-in-One.
Attach your 4-wire phone cord to the open port on the adaptor and to the telephone
wall jack. For more information on using the 2-wire phone cord adaptor, see the
documentation that came with it.
For more information on setting up the HP All-in-One, see the printed documentation
that came with the HP All-in-One.
Cause: Other office equipment (such as an answering machine or a telephone) is
not set up properly with the HP All-in-One.
Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.

Troubleshooting

Make sure you have correctly connected the HP All-in-One to the telephone wall jack,
and correctly connected any additional equipment and services that share the phone
line with the HP All-in-One.

Fax troubleshooting

221

Chapter 15

Use the port labeled 1-LINE on the back of the HP All-in-One to connect to the
telephone wall jack. Use the 2-EXT port to connect to any other equipment, such as
an answering machine or a telephone, as shown below.

Telephone wall jack

Use the phone cord supplied in the box with the HP All-in-One

Telephone (optional)

For more information on setting up the HP All-in-One, see the printed documentation
that came with the HP All-in-One.
Cause:

You are using a phone line splitter.

Solution: A phone line splitter can cause faxing problems. (A splitter is a two-cord
connector that plugs into a telephone wall jack.) Try removing the splitter and
connecting the HP All-in-One directly to the telephone wall jack.
Cause:

The telephone wall jack is not working properly.

Solution: Try connecting a working telephone and phone cord to the telephone wall
jack you are using for the HP All-in-One and check for a dial tone. If you do not hear
a dial tone, call your local telephone company for service.
Cause: The phone line connection is noisy. Phone lines with poor sound quality
(noise) can cause faxing problems.

Troubleshooting

222

Troubleshooting

If you are still having problems faxing, set the Fax Speed to a slower rate such as
Medium (14400) or Slow (9600).
For more information, see:
•
•

“Send a fax in Error Correction Mode” on page 139
“Set the fax speed” on page 30

Cause: Other equipment that uses the same phone line as the HP All-in-One might
be in use.
Solution: Make sure extension phones (phones on the same phone line, but not
connected to the HP All-in-One) or other equipment are not in use or off the hook.
For example, you cannot use the HP All-in-One for faxing if an extension phone is off
the hook, or if you are using a computer dial-up modem to send e-mail or access the
Internet.
Cause: The HP All-in-One shares the same phone line with a DSL service and a
DSL filter is not connected.
Solution: If you use a DSL service, make sure that you have a DSL filter connected
or you will not be able to fax successfully. The DSL service sends out a digital signal
on the phone line that can interfere with the HP All-in-One, preventing the HP All-inOne from sending and receiving faxes. The DSL filter removes the digital signal and
allows the HP All-in-One to communicate properly with the phone line. To check if
you already have a filter installed, listen to your phone line or dial tone. If you hear
noise or static on the line, you probably do not have a DSL filter installed, or it is
installed incorrectly. Obtain a DSL filter from your DSL provider. If you already have
a DSL filter, make sure it is connected correctly.
Cause: Another process has caused an error in the HP All-in-One.
Solution: Check the display or your computer for an error message providing
information about the problem and how to solve it. If there is an error, the HP All-inOne will not send or receive a fax until the error condition is resolved.
You can also check the status of the HP All-in-One by clicking Status in the
HP Solution Center.
For more information, see:
“Errors” on page 258

Troubleshooting

Cause: You are using either a PBX or an ISDN converter/terminal adapter.

Fax troubleshooting

223

Chapter 15

Solution:
• Make sure the HP All-in-One is connected to the port that is designated for fax
and phone use. Also, make sure that the terminal adapter is set to the correct
switch type for your country/region, if possible.
NOTE: Some ISDN systems allow you to configure the ports for specific
phone equipment. For example, you might have assigned one port for
telephone and Group 3 fax and another port for multiple purposes. If you have
problems when connected to the fax/phone port of your ISDN converter, try
using the port designated for multiple purposes; it might be labeled "multicombi" or something similar.

•

For more information on how to set up the HP All-in-One with a PBX phone system
or ISDN line, see the printed documentation that came with the HP All-in-One.
Try setting the Fax Speed to Medium (14400) or Slow (9600).

For more information, see:
“Set the fax speed” on page 30
Cause:

The Fax Speed setting is set too fast.

Solution: You might need to send and receive faxes at a slower rate. Try setting
the Fax Speed to Medium (14400) or Slow (9600) if you use one of the following:
• An Internet phone service
• A PBX system
• Fax over Internet Protocol (FoIP)
• An ISDN service
For more information, see:
“Set the fax speed” on page 30
Cause: The HP All-in-One might be connected to a telephone wall jack that is set
up for digital phones.
Solution: Make sure you connect the HP All-in-One to an analog phone line or you
will not be able to send or receive faxes. To check if your phone line is digital, connect
a regular analog phone to the line and listen for a dial tone. If you do not hear a normal
sounding dial tone, it might be a phone line set up for digital phones. Connect the
HP All-in-One to an analog phone line and try sending or receiving a fax.
Cause: The HP All-in-One shares the same phone line with a DSL service and the
DSL modem might not be properly grounded.
Solution: If the DSL modem is not properly grounded, it can create noise on the
phone line. Phone lines with poor sound quality (noise) can cause faxing problems.
Troubleshooting
224

Troubleshooting

You can check the sound quality of the phone line by plugging a phone into the
telephone wall jack and listening for static or other noise.
If you hear noise, do the following
1. Turn off your DSL modem and completely remove power for at least 15 minutes.
2. Turn the DSL modem back on.
3. Listen to the dial tone again. If the dial tone sounds clear (no noise or static), try
sending or receiving a fax.
NOTE: You might notice static on the phone line again in the future. If the HP Allin-One stops sending and receiving faxes, repeat this process.
If the phone line is still noisy, contact your phone company. For information on turning
your DSL modem off, contact your DSL provider for support.
Cause: You are faxing over the Internet using an IP phone, and there was a problem
with the transmission.
Solution: Try resending your fax at a later time. Also, make sure your Internet
service provider supports faxing over the Internet.
If the problem persists, contact your Internet service provider.

The HP All-in-One cannot send faxes, but can receive faxes
Cause: The HP All-in-One is not set up properly for faxing.
Solution: Follow the instructions in your printed documentation to set up the HP Allin-One properly for faxing, based on the equipment and services you have on the
same phone line as the HP All-in-One. Then, run a fax test to check the status of the
HP All-in-One and to make sure you set it up properly.
The HP All-in-One prints a report with the results of the test. If the test fails, review
the report for information on how to fix the problem.
For more information, see:
“Test your fax setup” on page 63
Cause: The HP All-in-One might be dialing too fast or too soon.

If you are using a speed dial entry to send the fax, update the speed dial entry to
include pauses in the number sequence.

Fax troubleshooting

225

Troubleshooting

Solution: You might need to insert some pauses in the number sequence. For
example, if you need to access an outside line before dialing the phone number, insert
a pause following the access number. If your number is 95555555, and 9 accesses
an outside line, you might insert pauses as follows: 9-555-5555. To enter a pause in
the fax number you are typing, press the Space button repeatedly until a dash (-)
appears on the display.

Chapter 15

You can also send the fax using monitor dialing. This enables you to listen to the
phone line as you dial. You can set the pace of your dialing and respond to prompts
as you dial.
For more information, see:
•
•

“Update individual speed dial entries” on page 66
“Send a fax using monitor dialing” on page 134

Cause:

The number you entered when sending the fax is not in the proper format.

Solution: Check to see that the fax number you entered is correct and in the proper
format. For example, you might need to dial a "9" prefix, depending on your phone
system.
If your phone line has a PBX system, make sure you are dialing the number for an
outside line before dialing the fax number.
Cause:

The receiving fax machine is having problems.

The HP All-in-One is having problems sending a manual fax
Cause:
Solution:
manually.

The recipient's fax machine might not support receiving faxes manually.
Check with the recipient to see if their fax machine can receive faxes

Cause: You did not press Start Fax Black or Start Fax Color within three seconds
of hearing fax tones.
Solution: If you are sending a fax manually, make sure that you press Start Fax
Black or Start Fax Color within three seconds of hearing the recipient's fax tones,
otherwise the transmission might fail.
For more information, see:
“Send a fax manually from a phone” on page 133
Cause: The telephone used to initiate the fax call was not connected directly to the
HP All-in-One or was not connected properly.

Troubleshooting
226

Troubleshooting

Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.
To send a fax manually, the telephone must be connected directly to the port labeled
2-EXT on the HP All-in-One, as shown below.

Telephone wall jack

Use the phone cord supplied in the box with the HP All-in-One

Telephone

For more information on setting up the HP All-in-One with your telephone, see the
printed documentation that came with the HP All-in-One.
Cause: The Fax Speed setting might be set too fast.
Solution: Try setting the Fax Speed to Medium (14400) or Slow (9600), and then
resend the fax.
For more information, see:
“Set the fax speed” on page 30

Solution: If you did not load an original in the document feeder tray, or if the original
is not pushed in far enough, you will be unable to send a fax manually. Load an original
in the document feeder tray, or push the original farther into the tray. Once the HP Allin-One detects the original, a confirmation message appears on the display.

Fax troubleshooting

227

Troubleshooting

Cause: The HP All-in-One is not detecting an original loaded in the document feeder
tray.

Chapter 15

Pages of a fax I sent are missing
Cause:
time.

Two or more pages were fed through the document feeder tray at the same

Solution: Print a Last Transaction report to verify the number of pages that were
sent. If two or more pages stuck together and were fed into the document feeder tray
at the same time, the number of pages in the report would not match the actual
number of pages. If the number of pages listed in the report does not match the actual
number of pages, you might need to clean the separator pad in the automatic
document feeder.
For more information, see:
•
•

“Print other reports” on page 152
“Clean the automatic document feeder” on page 173

Cause:

The receiving fax machine is having problems.

Solution: To check this, try calling the fax number from a telephone and listen for
fax tones. If you cannot hear fax tones, the receiving fax might not be turned on or
connected, or a voice mail service could be interfering with the recipient's phone line.
The memory of the receiving fax machine might be full or the fax machine might have
run out of paper. You can ask the recipient to check the receiving fax machine for any
problems.
Cause: The phone line connection is noisy. Phone lines with poor sound quality
(noise) can cause faxing problems.
Solution: If the failure was due to noise on the phone line, resend the fax. The
quality might be better when you try again. You can check the sound quality of the
phone line by plugging a phone into the telephone wall jack and listening for static or
other noise. If the problem persists, turn Error Correction Mode (ECM) off and
contact your telephone company.
For more information, see:
“Send a fax in Error Correction Mode” on page 139

The quality of the fax I sent is poor
Cause: The phone line connection is noisy. Phone lines with poor sound quality
(noise) can cause faxing problems.
Solution: If the failure was due to noise on the phone line, resend the fax. The
quality might be better when you try again. You can check the sound quality of the
phone line by plugging a phone into the telephone wall jack and listening for static or
other noise. If the problem persists, turn Error Correction Mode (ECM) off and
contact your telephone company.
Troubleshooting

If the problem persists, check to see if Error Correction Mode (ECM) is On. If it is
not, change the ECM setting to On. Faxes might take longer to send, but the print
quality of the received fax should improve.

228

Troubleshooting

If the print quality is still poor, turn off ECM, and then contact your telephone provider.
For more information, see:
“Send a fax in Error Correction Mode” on page 139
Cause: The fax resolution setting is set to a low resolution, such as Standard.
Solution: For the highest-quality fax, change the fax resolution to Fine, Very
Fine (if available), or Photo.
For more information, see:
“Change the fax resolution” on page 137
Cause: The glass of the HP All-in-One might be dirty.
Solution: If you are sending a fax from the glass, make a copy to check the quality
of the printout. If the quality of the printout is poor, clean the glass.
For more information, see:
•
•

“Make a copy” on page 121
“Clean the glass” on page 155

Cause: The receiving fax machine is having problems.
Solution: To check this, try calling the fax number from a telephone and listen for
fax tones. If you cannot hear fax tones, the receiving fax might not be turned on or
connected, or a voice mail service could be interfering with the recipient's phone line.
You can also ask the recipient to check the receiving fax machine for any problems.
Cause: The Lighter/Darker setting might be set too light. If you are sending a
faded, washed out, or handwritten fax, or a document with a watermark (such as a
red seal or stamp), you can change the Lighter/Darker setting to send the fax darker
than the original.
Solution: Make a copy to check the quality of the printout. If the printout is too light,
you can darken it by adjusting the Lighter/Darker setting when sending the fax.
For more information, see:
“Change the Lighter/Darker setting” on page 138

Parts of a fax I sent are cut off
Solution: Some fax machines cannot accept faxes larger than letter or A4 paper.
Make sure the receiving fax machine can accept the paper size you are using. If not,
ask the recipient if the receiving fax machine has a fit to page setting they can use to
reduce the incoming fax to fit standard paper size such as letter or A4.

Fax troubleshooting

229

Troubleshooting

Cause: The fax is larger than letter or A4 paper.

Chapter 15

The fax I sent was blank when it was received
Cause:

The original was not loaded or was loaded incorrectly.

Solution: Load your originals print side up into the document feeder tray. If you are
sending a single-page fax, such as a photograph, you can also load your original print
side down on the glass.
For more information, see:
“Load originals” on page 71

Fax transmission is slow
Cause:

You are sending a fax in color.

Solution: Sending a fax in color can take longer than sending a black-and-white
fax. Try sending the fax in black and white.
Cause:

The document contains a lot of graphics or has very fine detail.

Solution: For faster transmission, use Standard resolution. This setting provides
the fastest possible transmission with the lowest quality of fax. The default resolution
is Fine, which can take longer to send.
For more information, see:
“Change the fax resolution” on page 137
Cause: The phone line connection is noisy. Phone lines with poor sound quality
(noise) can cause faxing problems.
Solution: If the failure was due to noise on the phone line, contact the sender to
have them resend the fax. The quality might be better when you try again. You can
check the sound quality of the phone line by plugging a phone into the telephone wall
jack and listening for static or other noise. If the problem persists, turn Error
Correction Mode (ECM) off and contact your telephone company.
For more information, see:
“Send a fax in Error Correction Mode” on page 139
Cause: The fax resolution setting is set to a high resolution, such as Fine (the
default) or Photo.
Solution: For faster transmission, use Standard resolution. This setting provides
the fastest possible transmission with the lowest quality of fax.
For more information, see:
“Change the fax resolution” on page 137
Troubleshooting

Cause:

The receiving fax machine is having problems.

Solution: To check this, try calling the fax number from a telephone and listen for
fax tones. If you cannot hear fax tones, the receiving fax might not be turned on or

230

Troubleshooting

connected, or a voice mail service could be interfering with the recipient's phone line.
You can also ask the recipient to check the receiving fax machine for any problems.
Cause: The Fax Speed option is set to a slow transmission speed.
Solution:
(14400).

Make sure the Fax Speed option is set to Fast (33600) or Medium

For more information, see:
“Set the fax speed” on page 30

The HP All-in-One cannot receive faxes, but can send faxes
Cause: The HP All-in-One is not set up properly for faxing.
Solution: Follow the instructions in your printed documentation to set up the HP Allin-One properly for faxing, based on the equipment and services you have on the
same phone line as the HP All-in-One. Then, run a fax test to check the status of the
HP All-in-One and to make sure you set it up properly.
The HP All-in-One prints a report with the results of the test. If the test fails, review
the report for information on how to fix the problem.
For more information, see:
“Test your fax setup” on page 63
Cause: Auto Answer is turned off, which means that the HP All-in-One will not
answer incoming calls. You must be available to respond in person to incoming fax
calls, or the HP All-in-One will not answer the incoming fax call.
Solution: Depending on your office setup, you might be able to set the HP All-inOne to answer incoming calls automatically. To find out what the recommended
answer mode is for your office setup, see the printed documentation that came with
the HP All-in-One.
If you must have Auto Answer off, you will need to press Start Fax Black or Start
Fax Color to receive a fax.
TIP: If you are not close enough to the HP All-in-One to reach the control panel,
wait several seconds, and then press 1 2 3 on your phone. If the HP All-in-One
does not begin receiving the fax, wait several more seconds and press 1 2 3 again.
After the HP All-in-One begins to receive the fax, you can hang up the phone.

Solution: Set the HP All-in-One to answer faxes manually. You cannot receive
faxes automatically if you have a voice mail service at the same phone number you
use for fax calls. You must receive faxes manually; this means you must be available
to respond in person to incoming fax calls.

Fax troubleshooting

231

Troubleshooting

Cause: You subscribe to a voice mail service at the same phone number you use
for fax calls.

Chapter 15

For more information on how to set up the HP All-in-One when you have a voice mail
service, see the printed documentation that came with the HP All-in-One.
Cause:
in-One.

You have a computer dial-up modem on the same phone line as the HP All-

Solution: If you have a computer dial-up modem on the same phone line as the
HP All-in-One, check to make sure that the software that came with your modem is
not set to receive faxes automatically. Modems that are set up to receive faxes
automatically take over the phone line to receive all incoming faxes, which prevents
the HP All-in-One from receiving fax calls.
Cause: If you have an answering machine on the same phone line with the HP Allin-One, you might have one of the following problems:
• Your outgoing message might be too long or too loud to allow the HP All-in-One
to detect fax tones, and the sending fax machine might disconnect.
• Your answering machine might not have enough quiet time after your outgoing
message to allow the HP All-in-One to detect fax tones. This problem is most
common with digital answering machines.
Solution: If you have an answering machine on the same phone line with the HP Allin-One, do the following:
• Disconnect the answering machine and then try receiving a fax. If faxing is
successful without the answering machine, the answering machine might be
causing the problem.
• Reconnect the answering machine and record your outgoing message again.
Record a message that is approximately 10 seconds in duration. Speak slowly
and at a low volume when recording your message. Leave at least 5 seconds of
silence at the end of the voice message. There should be no background noise
when recording this silent time. Try to receive a fax again.
Cause:

The answering machine is not set up properly with the HP All-in-One.

Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.
When you have an answering machine on the same phone line you use for fax calls,
you must connect the answering machine directly to the HP All-in-One using the port
Troubleshooting
232

Troubleshooting

labeled 2-EXT, as shown below. You also need to set the correct number of rings to
answer for both the answering machine and HP All-in-One.

Telephone wall jack

Connect to the IN port on the answering machine

Connect to the OUT port on the answering machine

Telephone (optional)

Answering machine

Use the phone cord supplied in the box with the HP All-in-One

Make sure the HP All-in-One is set to receive faxes automatically and that the Rings
to Answer setting is correct. The number of rings to answer for the HP All-in-One
should be greater than the number of rings to answer for the answering machine. Set
your answering machine to a low number of rings and the HP All-in-One to answer
in the maximum number of rings supported by your device. (The maximum number
of rings varies by country/region.) In this setup, the answering machine will answer
the call and the HP All-in-One will monitor the line. If the HP All-in-One detects fax
tones, the HP All-in-One will receive the fax. If the call is a voice call, the answering
machine will record the incoming message.
For more information on setting up the HP All-in-One, see the printed documentation
that came with the HP All-in-One.
For more information, see:
“Set the number of rings before answering” on page 62
“Set the answer mode” on page 62

Cause: You have a special ring pattern for your fax phone number (using a
distinctive ring service through your telephone company), and the Distinctive Ring
setting on the HP All-in-One does not match.
Solution: If you have a special ring pattern for your fax phone number (using a
distinctive ring service through your telephone company), make sure that the
Fax troubleshooting

233

Troubleshooting

•
•

Chapter 15

Distinctive Ring setting on the HP All-in-One is set to match. For example, if the
phone company has assigned your number a double ring pattern, make sure Double
Rings is selected as the Distinctive Ring setting.
NOTE: The HP All-in-One cannot recognize some ring patterns, such as those
with alternating short and long ringing patterns. If you are having problems with a
ring pattern of this type, ask your phone company to assign a non-alternating ring
pattern.
If you are not using a distinctive ring service, make sure that the Distinctive Ring
setting on the HP All-in-One is set to All Rings.
For more information, see:
“Change the answer ring pattern for distinctive ringing” on page 63
Cause: The Distinctive Ring setting is not set to All Rings (and you are not using
a distinctive ring service).
Solution: If you are not using a distinctive ring service, make sure that the
Distinctive Ring setting on the HP All-in-One is set to All Rings.
Cause: The fax signal level might not be strong enough, which can cause fax
reception problems.
Solution: If the HP All-in-One shares the same phone line with other types of phone
equipment, such as an answering machine, a computer dial-up modem, or a multiport switch box, the fax signal level might be reduced. The signal level can also be
reduced if you use a splitter or connect extra cables to extend the length of your
phone. A reduced fax signal can cause problems during fax reception.
• If you are using a splitter or extension cables, try removing them and connecting
the HP All-in-One directly to the telephone wall jack.
• To find out if other equipment is causing a problem, disconnect everything except
the HP All-in-One from the phone line, and then try to receive a fax. If you can
receive faxes successfully without the other equipment, one or more pieces of the
other equipment is causing problems; try adding them back one at a time and
receiving a fax each time, until you identify which equipment is causing the
problem.
Cause:

The memory of the HP All-in-One is full.

Troubleshooting

Solution: If Backup Fax Reception is enabled and there is an error condition on
the HP All-in-One, the memory might become full of faxes that have not yet been
printed and the HP All-in-One will stop answering calls. If an error condition exists
that is preventing the HP All-in-One from printing faxes, review the display for
information on the error condition. Also, check for the following problems:
• The HP All-in-One is not set up properly for faxing. See the printed documentation
for more information.
• There is no paper loaded in the input tray.
• There is a paper jam.

234

Troubleshooting

•

The ink cartridge door is open. Close the ink cartridge door, as shown below:

•

Resolve any problems found. The HP All-in-One automatically begins printing all the
unprinted faxes from memory. To clear the memory, you can also delete the faxes
stored in memory by turning off the HP All-in-One.
Cause: An error condition is preventing the HP All-in-One from receiving faxes and
Backup Fax Reception is set to Off.
Solution: Check for the following problems:
• The HP All-in-One is turned off. Press the On button to turn on the device.
• The HP All-in-One is not set up properly for faxing. See the printed documentation
for more information.
• There is no paper loaded in the input tray.
• There is a paper jam.
• The ink cartridge door is open. Close the ink cartridge door.
• The print head assembly is stalled. Turn the HP All-in-One off, remove any objects
that are blocking the print head assembly (including any packing materials), and
then turn the HP All-in-One on again.
NOTE: If Backup Fax Reception is enabled and you turn off the HP All-inOne, all faxes stored in memory are deleted, including any unprinted faxes
that you might have received while the HP All-in-One was in an error condition.
You will need to contact the senders to ask them to resend any unprinted
faxes. For a list of the faxes you have received, print the Fax Log. The Fax
Log is not deleted when the HP All-in-One is turned off.

The HP All-in-One is having problems receiving a manual fax
Cause: There are documents loaded in the document feeder tray.
Solution: The HP All-in-One will not receive a fax manually if documents are loaded
in the document feeder tray. Instead, the HP All-in-One attempts to send the
Fax troubleshooting

235

Troubleshooting

After you resolve any problems found, the HP All-in-One can begin answering
incoming fax calls.

Chapter 15

documents loaded in the document feeder tray. Remove any originals before
manually receiving faxes.
You can also contact the sender to verify that there are documents loaded in the
sending fax machine.
Cause:

The Fax Speed setting might be set too fast.

Solution: Set the Fax Speed to Medium (14400) or Slow (9600), and then contact
the sender to have them resend the fax.
For more information, see:
“Set the fax speed” on page 30
Cause:

There is an error message or other prompt on the display.

Solution: Check the display for an error message or prompt providing information
about the problem and how to solve it. If there is an error message or prompt on the
display, the HP All-in-One will not receive the fax manually until the error condition is
resolved and the message is cleared.
If the HP All-in-One has an alignment message, you might be able to press OK to
clear the message and resume faxing.
For more information, see:
•
•

“Align the printer” on page 161
“Errors” on page 258

Fax tones are recorded on my answering machine
Cause: The answering machine is not set up properly with the HP All-in-One or the
Rings to Answer setting is not correct.
Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.

Troubleshooting
236

Troubleshooting

When you have an answering machine on the same phone line you use for fax calls,
you must connect the answering machine directly to the HP All-in-One using the port
labeled 2-EXT, as shown below.

Telephone wall jack

Connect to the IN port on the answering machine

Connect to the OUT port on the answering machine

Telephone (optional)

Answering machine

Use the phone cord supplied in the box with the HP All-in-One

Make sure the HP All-in-One is set to receive faxes automatically and that the Rings
to Answer setting is correct. The number of rings to answer for the HP All-in-One
should be greater than the number of rings to answer for the answering machine. If
the answering machine and the HP All-in-One are set to the same number of rings to
answer, both devices will answer the call and fax tones will be recorded on the
answering machine.
Set your answering machine to a low number of rings and the HP All-in-One to answer
in the maximum number of rings supported. (The maximum number of rings varies
by country/region.) In this setup, the answering machine will answer the call and the
HP All-in-One will monitor the line. If the HP All-in-One detects fax tones, the HP Allin-One will receive the fax. If the call is a voice call, the answering machine will record
the incoming message.
For more information on setting up the HP All-in-One when you have an answering
machine, see the printed documentation that came with the HP All-in-One.
•
•

Troubleshooting

For more information, see:
“Set the answer mode” on page 62
“Set the number of rings before answering” on page 62

Fax troubleshooting

237

Chapter 15

Cause: The HP All-in-One is set up to receive faxes manually, which means that
the HP All-in-One will not answer incoming calls. You must be available to respond
in person to incoming fax calls, or the HP All-in-One will not receive the fax and your
answering machine will record the fax tones.
Solution: Set up the HP All-in-One to answer incoming calls automatically by
turning on Auto Answer. If it is turned off, the HP All-in-One will not monitor incoming
calls and receive faxes. In this case, the answering machine will answer the fax call
and record the fax tones.
For more information on setting up the HP All-in-One when you have an answering
machine, see the printed documentation that came with the HP All-in-One.

The HP All-in-One is not answering incoming fax calls
Cause:

The HP All-in-One is turned off.

Solution: Look at the display on the HP All-in-One. If the display is blank and the
On button is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly
connected to the HP All-in-One and plugged into a power outlet. Press the On button
to turn on the HP All-in-One.
Cause: Auto Answer is turned off, which means that the HP All-in-One will not
answer incoming calls. You must be available to respond in person to incoming fax
calls, or the HP All-in-One will not answer the incoming fax call.
Solution: Depending on your office setup, you might be able to set the HP All-inOne to answer incoming calls automatically. To find out what the recommended
answer mode is for your office setup, see the printed documentation that came with
the HP All-in-One.
If you must have Auto Answer off, you will need to press Start Fax Black or Start
Fax Color to receive a fax.

TIP: If you are not close enough to the HP All-in-One to reach the control panel,
wait several seconds, and then press 1 2 3 on your phone. If the HP All-in-One
does not begin receiving the fax, wait several more seconds and press 1 2 3 again.
After the HP All-in-One begins to receive the fax, you can hang up the phone.
Cause: You have a special ring pattern for your fax phone number (using a
distinctive ring service through your telephone company), and the Distinctive Ring
setting on the HP All-in-One does not match.
Solution: If you have a special ring pattern for your fax phone number (using a
distinctive ring service through your telephone company), make sure that the
Distinctive Ring feature on the HP All-in-One is set to match. For example, if the
phone company has assigned your number a double ring pattern, make sure Double
Rings is selected as the Distinctive Ring setting.
Troubleshooting

238

Troubleshooting

NOTE: The HP All-in-One cannot recognize some ring patterns, such as those
with alternating short and long ringing patterns. If you are having problems with a
ring pattern of this type, ask your phone company to assign a non-alternating ring
pattern.
If you are not using a distinctive ring service, check to make sure that the Distinctive
Ring feature on the HP All-in-One is set to All Rings.
For more information, see:
“Change the answer ring pattern for distinctive ringing” on page 63
Cause: The Distinctive Ring feature is not set to All Rings (and you are not using
a distinctive ring service).
Solution: If you are not using a distinctive ring service, check to make sure that the
Distinctive Ring feature on the HP All-in-One is set to All Rings.
Cause: The memory of the HP All-in-One is full.
Solution: If the memory becomes full of faxes that have not yet been printed, the
HP All-in-One stops answering calls. If an error condition exists that is preventing the
HP All-in-One from printing faxes, review the display for information on the error
condition. Also, check for the following problems:
• The HP All-in-One is not set up properly for faxing. See the printed documentation
for information.
• There is no paper loaded in the input tray.
• There is a paper jam.
• The ink cartridge door is open. Close the ink cartridge door, as shown below:

The print head assembly is stalled. Turn the HP All-in-One off, remove any objects
that are blocking the print head assembly (including any packing materials), and
then turn the HP All-in-One on again.
NOTE: If Backup Fax Reception is enabled and you turn off the HP All-inOne, all faxes stored in memory are deleted, including any unprinted faxes
that you might have received while the HP All-in-One was in an error condition.
You will need to contact the senders to ask them to resend any unprinted
faxes. For a list of the faxes you have received, print the Fax Log. The Fax
Log is not deleted when the HP All-in-One is turned off.

Fax troubleshooting

239

Troubleshooting

•

Chapter 15

Resolve any problems found. To clear the memory, you can either print or delete the
faxes stored in memory.
For more information, see:
“Reprint received faxes from memory” on page 142
Cause: An error condition is preventing the HP All-in-One from receiving faxes and
Backup Fax Reception is set to Off.
Solution: Check for the following problems:
• The HP All-in-One is turned off. Press the On button to turn on the device.
• The HP All-in-One is not set up properly for faxing. See the printed documentation
for information.
• There is no paper loaded in the input tray.
• There is a paper jam.
• The ink cartridge door is open. Close the ink cartridge door.
• The print head assembly is stalled. Turn the HP All-in-One off, remove any objects
that are blocking the print head assembly (including any packing materials), and
then turn the HP All-in-One on again.
After you resolve any problems found, the HP All-in-One can begin answering
incoming fax calls.

Pages of a fax I received are missing
Cause:
Solution:

The paper is not loaded correctly in the input tray.
Make sure you have paper loaded correctly.

If you have Backup Fax Reception enabled, the HP All-in-One might have stored
the fax in memory upon reception. After you have correctly loaded the paper in the
input tray, the HP All-in-One automatically begins printing all the unprinted faxes from
memory, in the order they were received. If you do not have Backup Fax
Reception enabled, or if the fax was not stored in memory for some reason (for
example, if the HP All-in-One was out of memory), you will need to contact the sender
and ask for the fax to be resent.
For more information, see:
“Load full-size paper” on page 76
Cause:

The sending fax machine is having problems.

Solution: Check with the sender to find out how many pages were sent. The
sending fax machine might have failed to feed each page of the original.

Troubleshooting

Faxes are received but do not print
Cause:

The HP All-in-One has a paper jam or is out of paper.

Solution: If you have Backup Fax Reception enabled, the HP All-in-One might
have stored the fax in memory upon reception. After clearing the paper jam or loading

240

Troubleshooting

paper in the input tray, the HP All-in-One automatically begins printing all the
unprinted faxes from memory, in the order they were received. If you do not have
Backup Fax Reception enabled, or if the fax was not stored in memory for some
reason (for example, if the HP All-in-One was out of memory), ask the sender to
resend the fax.
For more information, see:
“Clear paper jams” on page 171
Cause: Another process has caused an error in the HP All-in-One.
Solution: Check the display or your computer for an error message providing
information about the problem and how to solve it. If there is an error, the HP All-inOne will not print the fax until the error condition is resolved.
You can also check the status of the HP All-in-One by clicking Status in the
HP Solution Center.
For more information, see:
“The fax log report shows an error” on page 256
Cause: The ink cartridges might be out of ink.
Solution: Check the estimated ink levels in the ink cartridges. If the ink levels are
low, you might need to replace the ink cartridges.
If there is ink remaining in the ink cartridges, but you are still noticing a problem, print
a self-test report to determine if there is a problem with the ink cartridges. If the selftest report shows a problem, clean the ink cartridges. If the problem persists, you
might need to replace the ink cartridges.
For more information, see:
“Maintain the HP All-in-One” on page 155
Cause: The print head assembly is stalled.
Solution: Turn the HP All-in-One off, remove any objects that are blocking the print
head assembly (including any packing materials), and then turn the HP All-in-One on
again.
NOTE: If Backup Fax Reception is enabled and you turn off the HP All-in-One,
all faxes stored in memory are deleted, including any unprinted faxes that you
might have received while the HP All-in-One was in an error condition. You will
need to contact the senders to ask them to resend any unprinted faxes. For a list
of the faxes you have received, print the Fax Log. The Fax Log is not deleted
when the HP All-in-One is turned off.

Troubleshooting

Parts of a fax I received are cut off
Cause: The sending fax machine has a problem.

Fax troubleshooting

241

Chapter 15

Solution: Check with the sender to see if the sending fax machine is having
problems.
Cause: The fax originated on a larger paper size, such as legal, and the Automatic
Reduction option is turned off.
Solution: You can print the fax on legal-size paper or you can set the Automatic
Reduction feature to reduce the image so, if possible, it fits on one page.
Cause:
Solution:

The paper-width guide is not positioned correctly.
Make sure you have paper loaded correctly.

For more information, see:
“Load paper” on page 76
Cause: A legal-size fax was sent that contained very fine detail, such as large
graphics, and letter-size paper is loaded in the input tray.
Solution: If a legal-size fax was sent that contained very fine detail, such as large
graphics, the HP All-in-One will attempt to fit the fax on one page (if automatic
reduction is enabled). If the memory is full, the HP All-in-One might not be able to
reduce the image, causing it to be cut off and printed on a second page. You can
clear the memory and have the sender resend the fax.
NOTE: Clearing the memory will delete all faxes that are stored in memory,
including any faxes that have not been printed. You might want to print all faxes
in memory to make sure you do not lose any information.
For more information, see:
“Reprint received faxes from memory” on page 142
Cause: The paper loaded in the input tray is a different size than the Fax Paper
Size setting.
Solution: Make sure the paper loaded in the input tray matches the Fax Paper
Size setting.

The computer to which I am connecting has only one phone port
Cause: I am setting up the HP All-in-One on a shared voice/fax line with a computer
dial-up modem, and the computer has only one phone port.

Troubleshooting

Solution: If your computer has only one phone port, you will need to purchase a
parallel splitter (also called a coupler), as shown below. (A parallel splitter has one
RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2-line phone
splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front
and a plug on the back.)

242

Troubleshooting

NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.

Figure 15-1 Example of a parallel splitter

Figure 15-2 Back view of the HP All-in-One
Telephone wall jack

Phone cord connected to the 2-EXT port

Parallel splitter

Telephone (optional)

Computer with modem

Phone cord supplied in the box with the HP All-in-One connected to the 1-LINE port

Troubleshooting

Fax troubleshooting

243

Chapter 15

To set up the HP All-in-One to a computer with one phone port
1. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone
wall jack and plug it into the port labeled 2-EXT on the back of the HP All-in-One.
2. Using the phone cord supplied in the box with the HP All-in-One, connect one end
to your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the HP All-in-One.
NOTE: If you do not use the supplied cord to connect from the telephone
wall jack to the HP All-in-One, you might not be able to fax successfully. This
special phone cord is different from the phone cords you might already have
in your home or office.
3. Remove the white plug from the port labeled 2-EXT on the back of the HP All-inOne.
4. Using another phone cord, connect one end to the port labeled 2-EXT on the back
of the HP All-in-One. Connect the other end of the phone cord to the parallel
splitter on the side with the single phone port.
5. Unplug your computer modem from the telephone wall jack, and connect it to the
parallel splitter on the side with two phone ports.
6. If your modem software is set to receive faxes to your computer automatically,
turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your
modem software, the HP All-in-One will not be able to receive faxes.
7. (Optional) Connect a phone to the other open phone port on the parallel splitter.
8. Now you need to decide how you want the HP All-in-One to answer calls,
automatically or manually:
• If you set up the HP All-in-One to answer calls automatically, it answers all
incoming calls and receives faxes. The HP All-in-One will not be able to
distinguish between fax and voice calls in this case; if you suspect the call is
a voice call, you will need to answer it before the HP All-in-One answers the
call. To set up the HP All-in-One to answer calls automatically, turn on the
Auto Answer setting.
• If you set up the HP All-in-One to answer faxes manually, you must be
available to respond in person to incoming fax calls or the HP All-in-One
cannot receive faxes. To set up the HP All-in-One to answer calls manually,
turn off the Auto Answer setting.
9. Run a fax test.
If you pick up the phone before the HP All-in-One answers the call and hear fax tones
from a sending fax machine, you will need to answer the fax call manually.

Troubleshooting

Cause: I am setting up the HP All-in-One on a shared voice/fax line with a computer
dial-up modem and answering machine, and the computer only has one phone port.
Solution: If your computer has only one phone port, you will need to purchase a
parallel splitter (also called a coupler). (A parallel splitter has one RJ-11 port on the
front and two RJ-11 ports on the back. Do not use a 2-line phone splitter, a serial

244

Troubleshooting

splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the
back.)
NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.

Figure 15-3 Back view of the HP All-in-One
Telephone wall jack

Phone cord connected to the 2-EXT port

Parallel splitter

Telephone (optional)

Answering machine

Computer with modem

Phone cord supplied in the box with the HP All-in-One connected to the 1-LINE port

Troubleshooting

Fax troubleshooting

245

Chapter 15

To set up the HP All-in-One to a computer with one phone port
1. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone
wall jack and plug it into the port labeled 2-EXT on the back of the HP All-in-One.
2. Using the phone cord supplied in the box with the HP All-in-One, connect one end
to your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the HP All-in-One.
NOTE: If you do not use the supplied cord to connect from the telephone
wall jack to the HP All-in-One, you might not be able to fax successfully. This
special phone cord is different from the phone cords you might already have
in your home or office.
3. Remove the white plug from the port labeled 2-EXT on the back of the HP All-inOne.
4. Using another phone cord, connect one end to the port labeled 2-EXT on the back
of the HP All-in-One. Connect the other end of the phone cord to the parallel
splitter on the side with the single phone port.
5. Unplug your computer modem from the telephone wall jack, and connect it to the
parallel splitter on the side with two phone ports.
6. Connect your answering machine to the other open phone port on the parallel
splitter.
NOTE: If you do not connect your answering machine in this way, fax tones
from a sending fax machine might be recorded on your answering machine,
and you might not be able to receive faxes with the HP All-in-One.
7. (Optional) If your answering machine does not have a built-in phone, for
convenience you might want to connect a phone to the back of your answering
machine at the "OUT" port.
8. If your modem software is set to receive faxes to your computer automatically,
turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your
modem software, the HP All-in-One will not be able to receive faxes.
9. Turn on the Auto Answer setting.
10. Set your answering machine to answer after a low number of rings.
11. Change the Rings to Answer setting on the HP All-in-One to the maximum
number of rings supported by your device. (The maximum number of rings varies
by country/region.)
12. Run a fax test.

Troubleshooting

When the phone rings, your answering machine will answer after the number of rings
you have set, and then play your recorded greeting. The HP All-in-One monitors the
call during this time, "listening" for fax tones. If incoming fax tones are detected, the
HP All-in-One will emit fax reception tones and receive the fax; if there are no fax
tones, the HP All-in-One stops monitoring the line and your answering machine can
record a voice message.

246

Troubleshooting

Cause: I am setting up the HP All-in-One on a shared voice/fax line with a computer
dial-up modem and voice mail service, and the computer has only one phone port.
Solution: If your computer has only one phone port, you will need to purchase a
parallel splitter (also called a coupler). (A parallel splitter has one RJ-11 port on the
front and two RJ-11 ports on the back. Do not use a 2-line phone splitter, a serial
splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the
back.)
NOTE: This possible solution applies only in the countries/regions that receive
a 2-wire phone cord in the box with the HP All-in-One, including: Argentina,
Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia,
Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland,
Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA,
Venezuela, and Vietnam.

Figure 15-4 Back view of the HP All-in-One
Telephone wall jack

Phone cord connected to the 2-EXT port

Parallel splitter

Telephone (optional)

Computer with modem

Phone cord supplied in the box with the HP All-in-One connected to the 1-LINE port

Troubleshooting

Fax troubleshooting

247

Chapter 15

To set up the HP All-in-One to a computer with one phone port
1. Find the phone cord that connects from the back of your computer (your computer
dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone
wall jack and plug it into the port labeled 2-EXT on the back of the HP All-in-One.
2. Using the phone cord supplied in the box with the HP All-in-One, connect one end
to your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the HP All-in-One.
NOTE: If you do not use the supplied cord to connect from the telephone
wall jack to the HP All-in-One, you might not be able to fax successfully. This
special phone cord is different from the phone cords you might already have
in your home or office.
3. Remove the white plug from the port labeled 2-EXT on the back of the HP All-inOne.
4. Using another phone cord, connect one end to the port labeled 2-EXT on the back
of the HP All-in-One. Connect the other end of the phone cord to the parallel
splitter on the side with the single phone port.
5. Unplug your computer modem from the telephone wall jack, and connect it to the
parallel splitter on the side with two phone ports.
6. If your modem software is set to receive faxes to your computer automatically,
turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your
modem software, the HP All-in-One will not be able to receive faxes.
7. (Optional) Connect a phone to the other open phone port on the parallel splitter.
8. Turn off the Auto Answer setting.
9. Run a fax test.
If you pick up the phone before the HP All-in-One answers the call and hear fax tones
from a sending fax machine, you will need to answer the fax call manually.

I hear static on my telephone line since connecting the HP All-in-One
Cause:

The HP All-in-One is not set up properly for faxing.

Connect the HP All-in-One to a working telephone wall jack. Make sure you used the
phone cord supplied in the box with the HP All-in-One. Connect the 2-wire phone cord

248

Troubleshooting

to the port labeled 1-LINE on the back of the HP All-in-One and to your telephone
wall jack, as shown below.

Telephone wall jack

Use the phone cord supplied in the box with the HP All-in-One

Cause: You are using a phone line splitter between the 1-LINE port on the HP Allin-One and the wall.
Solution: A phone line splitter can affect the sound quality of your phone line and
cause static. (A splitter is a two-cord connector that plugs into a telephone wall jack.)
Fax troubleshooting

249

Troubleshooting

For more information on setting up the HP All-in-One, see the printed documentation
that came with the HP All-in-One.

Chapter 15

Try removing the splitter and connecting the HP All-in-One directly to the telephone
wall jack.
Cause:
Solution:

You are not using a proper grounded power outlet for the HP All-in-One.
Try connecting to another power outlet.

The fax test failed
If you tried to run the fax test from your computer and the fax test failed to run, the
HP All-in-One might be busy with another task or have an error condition preventing
it from running the fax test.
What to check
• The HP All-in-One is set up properly, connected to a power supply, and is
connected to your computer. For more information on setting up the HP All-inOne, see the Setup Guide that came with the HP All-in-One.
• The HP All-in-One is turned on. If it is not, press the On button to turn on the
HP All-in-One.
• The ink cartridges are installed correctly, the print head assembly is not blocked,
and the ink cartridge door is closed.
• The HP All-in-One is not currently busy with another task such as aligning the
printer. Check the display. If the HP All-in-One is busy, wait until it completes the
current task and run the fax test again.
• The Two-sided printing accessory is attached to the back of the HP All-in-One.
• There are no error messages on the display. If there is an error message, resolve
the problem and run the fax test again.
If you run the fax test and the HP All-in-One reports that the test failed, read the
following information carefully to determine how to correct any problems with your fax
setup. Different portions of the fax test might fail for different reasons.
Cause:

Troubleshooting
250

Troubleshooting

The "Fax Hardware Test" failed.

Solution:
What to do
• Turn off the HP All-in-One by using the On button located on the control panel
and then unplug the power cord from the back of the HP All-in-One. After a few
seconds, plug the power cord back in and turn the power on. Run the test again.
If the test fails again, continue reviewing the troubleshooting information in this
section.
NOTE: Depending how long the HP All-in-One is unplugged, the date and
time might be erased. You might need to reset the date and time later, when
you plug the power cord back in.
•
•

Try to send or receive a test fax. If you can send or receive a fax successfully,
there might not be a problem.
If you are running the test from the Fax Setup Wizard, make sure the HP All-inOne is not busy completing another task, such as making a copy. Check the
display for a message indicating that the HP All-in-One is busy. If it is busy, wait
until it is finished and in the idle state, before running the test.

After you resolve any problems found, run the fax test again to make sure it passes
and the HP All-in-One is ready for faxing. If the Fax Hardware Test continues to fail
and you experience problems faxing, contact HP Support. Go to www.hp.com/
support. If prompted, choose your country/region, and then click Contact HP for
information on calling for technical support.
Cause: The "Fax Connected to Active Telephone Wall Jack" test failed.
Solution:

Troubleshooting

What to do
• Check the connection between the telephone wall jack and the HP All-in-One to
make sure the phone cord is secure.
• Make sure you use the phone cord that came with the HP All-in-One. If you do
not use the supplied phone cord to connect from the telephone wall jack to the
HP All-in-One, you might not be able to send or receive faxes. After you plug in
the phone cord that came with the HP All-in-One, run the fax test again.
• Make sure you have correctly connected the HP All-in-One to the telephone wall
jack. Using the phone cord supplied in the box with the HP All-in-One, connect
one end to your telephone wall jack, then connect the other end to the port labeled

Fax troubleshooting

251

Chapter 15

1-LINE on the back of the HP All-in-One. For more information on setting up the
HP All-in-One for faxing, see the printed documentation.

•

Telephone wall jack

Use the phone cord supplied in the box with the HP All-in-One

If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the splitter
and connecting the HP All-in-One directly to the telephone wall jack.
Try connecting a working phone and phone cord to the telephone wall jack that
you are using for the HP All-in-One and check for a dial tone. If you do not hear
a dial tone, contact your telephone company and have them check the line.
Try to send or receive a test fax. If you can send or receive a fax successfully,
there might not be a problem.

After you resolve any problems found, run the fax test again to make sure it passes
and the HP All-in-One is ready for faxing.
Cause:
Solution:

The "Phone Cord Connected to Correct Port on Fax" test failed.
Plug the phone cord into the correct port.

What to do
1. Using the phone cord supplied in the box with the HP All-in-One, connect one end
to your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the HP All-in-One.
NOTE: If you use the 2-EXT port to connect to the telephone wall jack, you
will not be able to send or receive faxes. The 2-EXT port should only be used
to connect other equipment, such as an answering machine or a telephone.
Troubleshooting
252

Troubleshooting

Telephone wall jack

Use the phone cord supplied in the box with the HP All-in-One

2. After you have connected the phone cord to the port labeled 1-LINE, run the fax
test again to make sure it passes and the HP All-in-One is ready for faxing.
3. Try to send or receive a test fax.
Cause: The "Using Correct Type of Phone Cord with Fax" test failed.
Solution:

Telephone wall jack

Phone cord supplied in the box with the HP All-in-One

Troubleshooting

What to do
• Make sure you used the phone cord supplied in the box with the HP All-in-One to
connect to the telephone wall jack. One end of the phone cord should be
connected to the port labeled 1-LINE on the back of the HP All-in-One and the
other end to your telephone wall jack, as shown below.

Fax troubleshooting

253

Chapter 15

•

Check the connection between the telephone wall jack and the HP All-in-One to
make sure the phone cord is secure.

Cause:

The "Fax Line Condition" test failed.

Solution:
What to do
• Make sure you connect the HP All-in-One to an analog phone line or you will not
be able to send or receive faxes. To check if your phone line is digital, connect a
regular analog phone to the line and listen for a dial tone. If you do not hear a
normal sounding dial tone, it might be a phone line set up for digital phones.
Connect the HP All-in-One to an analog phone line and try sending or receiving
a fax.
• Check the connection between the telephone wall jack and the HP All-in-One to
make sure the phone cord is secure.
• Make sure you have correctly connected the HP All-in-One to the telephone wall
jack. Using the phone cord supplied in the box with the HP All-in-One, connect
one end to your telephone wall jack, then connect the other end to the port labeled
1-LINE on the back of the HP All-in-One. For more information on setting up the
HP All-in-One for faxing, see the User Guide.
• Other equipment, which uses the same phone line as the HP All-in-One, might
be causing the test to fail. To find out if other equipment is causing a problem,
disconnect everything except the HP All-in-One from the phone line, and then run
the test again.
• If the Fax Line Condition Test passes without the other equipment, then one
or more pieces of the equipment is causing problems; try adding them back
one at a time and rerunning the test each time, until you identify which piece
of equipment is causing the problem.
• If the Fax Line Condition Test fails without the other equipment, connect the
HP All-in-One to a working phone line and continue reviewing the
troubleshooting information in this section.
• If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the splitter
and connecting the HP All-in-One directly to the telephone wall jack.
After you resolve any problems found, run the fax test again to make sure it passes
and the HP All-in-One is ready for faxing. If the Fax Line Condition Test continues
to fail and you experience problems faxing, contact your telephone company and
have them check the phone line.
Cause:
Troubleshooting
254

Troubleshooting

The "Dial Tone Detection" test failed.

Solution:
What to do
• Other equipment, which uses the same phone line as the HP All-in-One, might
be causing the test to fail. To find out if other equipment is causing a problem,
disconnect everything except the HP All-in-One from the phone line, and then run
the test again. If the Dial Tone Detection Test passes without the other
equipment, then one or more pieces of the equipment is causing problems; try
adding them back one at a time and rerunning the test each time, until you identify
which piece of equipment is causing the problem.
• Try connecting a working phone and phone cord to the telephone wall jack that
you are using for the HP All-in-One and check for a dial tone. If you do not hear
a dial tone, contact your telephone company and have them check the line.
• Make sure you have correctly connected the HP All-in-One to the telephone wall
jack. Using the phone cord supplied in the box with the HP All-in-One, connect
one end to your telephone wall jack, then connect the other end to the port labeled
1-LINE on the back of the HP All-in-One. For more information on setting up the
HP All-in-One for faxing, see the printed documentation that came with the HP Allin-One.

•

Telephone wall jack

Use the phone cord supplied in the box with the HP All-in-One

If you are using a phone splitter, this can cause faxing problems. (A splitter is a
two-cord connector that plugs into a telephone wall jack.) Try removing the splitter
and connecting the HP All-in-One directly to the telephone wall jack.
If your telephone system is not using a standard dial tone, such as some PBX
systems, this might cause the test to fail. This will not cause a problem sending
or receiving faxes. Try sending or receiving a test fax.
Troubleshooting

•

Fax troubleshooting

255

Chapter 15

•

Check to make sure the country/region setting is set appropriately for your
country/region. If the country/region setting is not set or is set incorrectly, the test
might fail and you might have problems sending and receiving faxes.
Make sure you connect the HP All-in-One to an analog phone line or you will not
be able to send or receive faxes. To check if your phone line is digital, connect a
regular analog phone to the line and listen for a dial tone. If you do not hear a
normal sounding dial tone, it might be a phone line set up for digital phones.
Connect the HP All-in-One to an analog phone line and try sending or receiving
a fax.

After you resolve any problems found, run the fax test again to make sure it passes
and the HP All-in-One is ready for faxing. If the Dial Tone Detection Test continues
to fail, contact your telephone company and have them check the phone line.

I am having problems faxing over the Internet using IP phone
Cause: The fax over Internet Protocol (FoIP) service might not work properly when
the HP All-in-One is sending and receiving faxes at high speed (33600 bps).
Solution: If you experience problems sending and receiving faxes while using an
Internet fax service, use a slower fax speed. You can do this by changing the Fax
Speed setting from Fast (33600) (the default) to Medium (14400) or Slow (9600).
For more information, see:
“Set the fax speed” on page 30
Cause:

The HP All-in-One is not set up properly for faxing.

Solution: You can only send and receive faxes by connecting a phone cord to the
port labeled 1-LINE on the HP All-in-One and not from the Ethernet port. This means
that your connection to the Internet must be done either through a converter box
(which supplies regular analog phone jacks for fax connections) or your telephone
company.
Cause:

Your telephone company does not support faxing over the Internet.

Solution: Check with your telephone company to make sure their Internet phone
service supports faxing. If they do not support faxing, you will not be able to send and
receive faxes through the Internet.

The fax log report shows an error
Cause: If there is a problem or error encountered during sending or receiving a fax,
a Fax Log report will print.

Troubleshooting

Solution: Review the following table for information on the error codes in the Fax
Log report. This information can help you troubleshoot any problems you encounter
when using the fax features of the HP All-in-One. The table also indicates which codes

256

Troubleshooting

are specific to Error Correction Mode (ECM). If the same error appears repeatedly,
try turning off ECM.
Error code

Error definition

(223 Error
Correction Mode)

One or more received pages might not be readable.

224
225-231

There is a feature incompatibility with the sending fax machine.

232-234

The telephone connection was lost.

(235-236 Error
Correction Mode)
237
238

The sending fax machine sent an unexpected communication.

(239-241 Error
Correction Mode)
242

The sending fax machine is attempting to receive instead of send.

243-244

The sending fax machine prematurely ended the session.

(245-246 Error
Correction Mode)
247-248

There was a communication error with the sending fax machine.

(249-251 Error
Correction Mode)
252

Telephone line conditions were too poor to receive a fax.

253

The sending fax machine attempted to use an unsupported page width.

281

The telephone connection was lost.

(282 Error
Correction Mode)
283-284
(285 Error
Correction Mode)

290

There was a communication error with the sending fax machine.

291

The received fax could not be stored.

314-320

There is a feature incompatibility with the receiving fax machine.

321

There was a communication error with the receiving fax machine.

322-324

Telephone line conditions were too poor to send a fax.

(325-328 Error
Correction Mode)

The receiving fax machine indicated one or more pages might not be
readable.

329-331
332-337

The receiving fax machine sent an unexpected communication.

Fax troubleshooting

257

Troubleshooting

286

Chapter 15
(continued)
Error code

Error definition

(338-342 Error
Correction Mode)
343
344-348

The telephone connection was lost.

(349-353 Error
Correction Mode)
354-355
356-361

The receiving fax machine prematurely ended the session.

(362-366 Error
Correction Mode)
367-372

There was a communication error with the receiving fax machine.

(373-377 Error
Correction Mode)
378-380
381

The telephone connection was lost.

382

The receiving fax machine stopped accepting pages.

383

The telephone connection was lost.

390-391

There was a communication error with the receiving fax machine.

For more information, see:
“Send a fax in Error Correction Mode” on page 139

Errors
This section contains the following categories of messages on your device:
•
•
•
•
•
•

Device messages
File messages
General user messages
Paper messages
Power and connection messages
Ink cartridge messages

Device messages
The following is a list of device-related error messages:

Troubleshooting

•
•
•
•
•

258

Automatic document feeder failed to load
Automatic document feeder is jammed
Firmware revision mismatch
Mechanism error
Memory is full

Troubleshooting

•
•
•
•
•

Scanner failure
Photo tray problem
Photo tray cannot engage
Photo tray cannot disengage
Two-sided printing accessory is missing

Automatic document feeder failed to load
Cause: The automatic document feeder did not work properly, and the job did not
finish.
Solution: Try loading the originals in the automatic document feeder again, and
restart the job. Do not load more than 50 sheets of letter or A4 paper, or 35 sheets of
legal paper in the document feeder tray.
For more information, see:
“Load an original in the automatic document feeder” on page 71

Automatic document feeder is jammed
Cause: Paper has jammed the automatic document feeder.
Solution: Clear the paper jam and try the job again. Do not load more than 50
sheets of letter or A4 paper, or 35 sheets of legal paper in the document feeder tray.
For more information, see:
“Clear paper jams” on page 171

Firmware revision mismatch
Cause: The revision number of the HP All-in-One firmware does not match the
revision number of the software.
Solution: To find support and warranty information, go to the HP Web site at
www.hp.com/support. If prompted, choose your country/region, and then click
Contact HP for information on calling for technical support.

Mechanism error
Cause: The HP All-in-One has a paper jam.
Solution:

Clear the paper jam.

For more information, see:

Cause: The print head assembly is blocked or stalled.
Solution: Turn the HP All-in-One off and open the ink cartridge door. Remove any
objects that are blocking the print head assembly (including any packing materials),
and then turn the HP All-in-One on again.

Errors

259

Troubleshooting

“Clear paper jams” on page 171

Chapter 15

Memory is full
Cause:
paper.

While receiving a fax, the HP All-in-One jammed with paper or ran out of

Solution: If the HP All-in-One supports faxing and you have Backup Fax
Reception enabled, the HP All-in-One might have stored the fax in memory upon
reception.
After clearing the paper jam or loading paper in the input tray, you might be able to
reprint the entire fax from memory. If you do not have Backup Fax Reception
enabled, or if the fax was not stored in memory for some reason (for example, if the
HP All-in-One was out of memory), you will need to contact the sender and ask for
the fax to be resent.
For more information, see:
•
•
•

“Clear paper jams” on page 171
“Load paper” on page 76
“Reprint received faxes from memory” on page 142

Cause:
One.

The document you are copying has exceeded the memory of the HP All-in-

Solution: Try making fewer copies or, in the case of a multi-page document, copy
fewer pages at a time.

Scanner failure
Cause:

The HP All-in-One is busy or an unknown cause has interrupted your scan.

Solution: Turn off the HP All-in-One and then turn it on again. Restart your
computer and then try to scan again.
If the problem persists, try plugging the power cord directly into a grounded power
outlet rather than a surge protector or power strip. If the problem continues, contact
HP Support. Go to www.hp.com/support. If prompted, choose your country/region,
and then click Contact HP for information on calling for technical support.

Photo tray problem
Cause:

There is not enough paper in the photo tray.

Solution: If the photo tray is empty or there are only a few sheets remaining, load
more paper in the photo tray. If there is paper in the photo tray, remove the paper,
tap the stack of paper against a flat surface, and reload the paper into the photo tray.
Follow the prompts on the display or the computer screen to continue your print job.
Cause:
Troubleshooting

Solution:
Cause:

260

Troubleshooting

The paper is not feeding properly or is loaded incorrectly.
Make sure you have paper loaded correctly in the photo tray.
There might be too much paper loaded in the photo tray.

Solution: Do not overload the photo tray; make sure the stack of photo paper fits
within the photo tray and is no higher than the top of the paper-width guide.
Cause: Two or more pieces of paper might be stuck together.
Solution: Remove the paper from the photo tray and shuffle the paper so it does
not stick together. Reload the paper into the photo tray and try printing again.
Cause: The photo paper might be curled.
Solution: If the photo paper is curled, place the paper in a plastic bag and gently
bend it the opposite direction of the curl until the paper lies flat. If the problem persists,
use photo paper that is not curled.
Cause: You might be using the printer in an extremely high- or low-humidity
environment.
Solution:

Load one sheet of photo paper at a time.

Photo tray cannot engage
Cause: The photo tray might not be pushed all the way in.
Solution: Lift the output tray, then push the photo tray all the way in. Push the output
tray all the way down.

Photo tray cannot disengage
Cause: The output tray might not be lowered all the way.
Solution:

Push the output tray all the way down.

Two-sided printing accessory is missing
Cause: The Two-sided printing accessory is not installed or it is installed incorrectly.
Solution: Firmly insert the Two-sided printing accessory into the back of the device
until both sides snap into place.
NOTE: Do not press the buttons on either side of the accessory when installing
it. Use the buttons only when removing the accessory from the device.

File messages
The following is a list of file-related error messages:
Error reading or writing the file
Unreadable files. NN files could not be read
Photos not found
File not found

Troubleshooting

•
•
•
•

Errors

261

Chapter 15

•
•
•
•

File format not supported
Invalid file name
Supported file types for the HP All-in-One
File corrupted

Error reading or writing the file
Cause:

The HP All-in-One software could not open or save the file.

Solution:

Check to see if you typed the correct folder and file name.

Unreadable files. NN files could not be read
Cause: Some of the files on the inserted memory card or attached storage device
are damaged.
Solution: Reinsert the memory card in the HP All-in-One or try transferring the files
to your computer using a memory card reader or a USB cable. If you already
transferred the files to your computer, try printing those files by using the
HP Photosmart Software. The copies might not be damaged. If these solutions do
not work, retake the photos with your digital camera as a last resort.

Photos not found
Cause: Some of the files on the inserted memory card or attached storage device
are damaged.
Solution: Reinsert the memory card in the HP All-in-One or try transferring the files
to your computer using a memory card reader or a USB cable. If you already
transferred the files to your computer, try printing those files by using the
HP Photosmart Software. The copies might not be damaged. If these solutions do
not work, retake the photos with your digital camera as a last resort.
Cause:

There are no photos found on the memory card or storage device.

Solution: Take some photos with your digital camera, or if you previously saved
photos on your computer, you can print them using the HP Photosmart Software.

File not found
Cause: There is not enough available memory on your computer to create a print
preview file.
Solution:

Close some applications and try the task again.

Troubleshooting

File format not supported
Cause: The HP All-in-One software did not recognize or support the file format of
the image you are trying to open or save. If the file extension indicates it is a supported
file type, the file might be corrupted.

262

Troubleshooting

Solution: Open the file in another application, and save it in a format that the HP Allin-One software recognizes.
For more information, see:
“Supported file types for the HP All-in-One” on page 263

Invalid file name
Cause: The file name you entered is invalid.
Solution:

Make sure that you are not using any invalid symbols in the file name.

NOTE: Although the file name might look correct, it could still include invalid
characters. Overwrite the existing file name with a new name.

Supported file types for the HP All-in-One
The HP All-in-One software recognizes the following file formats: BMP, DCX, FPX, GIF,
JPG, PCD, PCX, and TIF.
File corrupted
Cause: Some of the files on the inserted memory card or attached storage device
are damaged.
Solution: Reinsert the memory card in the HP All-in-One or try transferring the files
to your computer using a memory card reader or a USB cable. If you already
transferred the files to your computer, try printing those files by using the
HP Photosmart Software. The copies might not be damaged. If these solutions do
not work, retake the photos with your digital camera as a last resort.
Cause: The file system is corrupted.
Solution: Check the display for an error message telling you that the images on the
memory card or storage device are corrupted.
If the file system on the card is corrupt, reformat the memory card in your digital
camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.

General user messages
•
•
•

Troubleshooting

The following is a list of messages related to common user errors:
Cannot crop
Memory card error
Disconnected
Errors

263

Chapter 15

•
•
•
•
•
•
•
•
•
•
•

No scan options
Out of disk space
Memory card must be in slot
Card access error
Use only one card at a time
Card is inserted incorrectly
Card is not fully inserted
Card is damaged
Duplicate group speed dial name
Duplicate member
Invalid speed dial

Cannot crop
Cause:

The computer does not have enough memory.

Solution: Close all unnecessary applications. This includes applications that run in
the background, such as screensavers and virus checkers. (If you turn off your virus
checker, remember to turn it back on after you finish.) Try restarting your computer
to clear the memory. You might need to purchase more RAM. Refer to the
documentation that came with your computer.
Cause: For scanning, there must be at least 50 MB of space available on your
computer's hard disk.
Solution: Empty the Recycle Bin on your desktop. You might also need to remove
files from the hard disk.

Memory card error
Cause: There are two or more memory cards inserted into the HP All-in-One at the
same time.
Solution: Remove all but one memory card. The HP All-in-One reads the remaining
memory card and displays the first photo stored on the memory card.
Cause:
down.

You have inserted a Compact Flash memory card backwards or upside

Solution: Remove the memory card and reinsert it correctly. The front label of the
Compact Flash card faces left.
Cause:
Solution:
stops.
Troubleshooting
264

Troubleshooting

You have not fully inserted the memory card.
Remove the memory card and reinsert it in the memory card slot until it

Disconnected
Cause: Several situations can cause this error message to appear.
• Your computer is not turned on.
• Your computer is not connected to the HP All-in-One.
• The software that came with the HP All-in-One was not installed correctly.
• The software that came with the HP All-in-One is installed, but it is not running.
Solution: Make sure your computer is turned on and is connected to the HP All-inOne. Also make sure you installed the software that came with the HP All-in-One.
For more information, see:
•
•

“Communication problems over a USB connection” on page 169
“Network troubleshooting” on page 183

No scan options
Cause: The software that came with the HP All-in-One is not running, or has never
been installed.
Solution: Make sure the software is installed and running. For more information,
see the Setup Guide that came with the HP All-in-One.

Out of disk space
Cause: There is not enough available memory on your computer to perform the
task.
Solution:

Close some applications and try the task again.

Memory card must be in slot
Cause: The feature you are trying to use is only available when there is a memory
card or storage device inserted in the HP All-in-One.
Solution: Make sure you fully insert a memory card into the appropriate slot on the
HP All-in-One or connect a storage device to the front USB port, and then try the task
again.

Card access error
Cause: There are two or more memory cards inserted into the HP All-in-One at the
same time.

Cause: You have inserted a Compact Flash memory card backwards or upside
down.

Errors

265

Troubleshooting

Solution: Remove all but one memory card. The HP All-in-One reads the remaining
memory card and displays the first photo stored on the memory card.

Chapter 15

Solution: Remove the memory card and reinsert it correctly. The front label of the
Compact Flash card faces left.
Cause:
Solution:
stops.

You have not fully inserted the memory card.
Remove the memory card and reinsert it in the memory card slot until it

Use only one card at a time
Cause:
Solution:

Multiple memory cards are inserted in the HP All-in-One.
You can insert only one memory card at a time.

If more than one memory card is inserted, the Attention light will blink rapidly, and an
error message will appear on the display. Remove the additional memory card to
resolve the problem.

Card is inserted incorrectly
Cause:

The card is inserted backwards or upside down.

Solution: Turn the memory card so that the front label faces left and the contacts
are on the right, and then push the card forward into the appropriate slot until the
Photo light turns on.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the Photo light (near the memory card slots) will not turn on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.

Card is not fully inserted
Cause:

The card is not fully inserted.

Solution: Make sure you fully insert the memory card into the appropriate slot on
the HP All-in-One.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the Photo light (near the memory card slots) will not turn on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.

Card is damaged
Troubleshooting

Cause: You formatted the card on a Windows XP computer. By default, Windows
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.

266

Troubleshooting

Solution: Reformat your memory card in your camera or format your memory card
in a Windows XP computer by selecting the FAT format.
Cause: The file system is corrupted.
Solution: Check the display for an error message telling you that the images on the
memory card are corrupted.
If the file system on the card is corrupt, reformat the memory card in your digital
camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.

Duplicate group speed dial name
Cause: The name you are trying to assign to the group speed dial is already being
used.
Solution:

Specify a different name for the group speed dial.

Duplicate member
Cause: The individual speed dial you are trying to add to the speed dial group is
already included in the group.
Solution: Add a different user to the group speed dial or just save your changes to
the group.

Invalid speed dial
Cause: The speed dial failed to connect to a fax machine.
Solution: Try dialing the fax number manually. If this works, update the speed dial.
If this does not work, contact the recipient to make sure you are dialing the correct
number.

Paper messages
The following is a list of paper-related error messages:
Cannot load paper from input tray
Ink is drying
Out of paper
Paper jam, misfeed or blocked print head assembly
Paper mismatch
Wrong paper width

Troubleshooting

•
•
•
•
•
•

Errors

267

Chapter 15

Cannot load paper from input tray
Cause:

There is not enough paper in the input tray.

Ink is drying
Cause: Transparencies and some other media require a drying time that is longer
than normal.
Solution: Leave the sheet in the output tray until the message disappears. If it is
necessary to remove the printed sheet before the message disappears, carefully hold
the printed sheet on the underside or the edges, and place it on a flat surface to dry.

Out of paper
Cause:

There is not enough paper in the input tray.

The Two-sided printing accessory is not connected to the HP All-in-One.

Solution: If you removed the Two-sided printing accessory to clear a paper jam,
replace it.
For more information, see:
“Clear paper jams” on page 171

Paper jam, misfeed or blocked print head assembly
Cause:

Paper has jammed the HP All-in-One.

Troubleshooting

Solution: Clear the jam. To continue your print job, press OK on the control panel
of the HP All-in-One.

268

Troubleshooting

For more information, see:
“Clear paper jams” on page 171
Cause: The print head assembly is blocked.
Solution: Turn the HP All-in-One off and open the ink cartridge door. Remove any
objects that are blocking the print head assembly (including any packing materials),
and then turn the HP All-in-One on again.

Paper mismatch
Cause: The print setting for the print job does not match the paper type or size
loaded in the HP All-in-One.
Solution:

Change the print setting or load the appropriate paper in the input tray.

For more information, see:
“Change the print settings for the current job” on page 84
“Information on paper” on page 171

Wrong paper width
Cause: The print setting chosen for the print job does not match the paper loaded
in the HP All-in-One.
Solution:

Change the print setting or load the appropriate paper in the input tray.

For more information, see:
“Information on paper” on page 171
“Change the print settings for the current job” on page 84
“Load paper” on page 76

Power and connection messages
The following is a list of power- and connection-related error messages:
•
•
•
•

Communication test failed
HP All-in-One not found
Improper shutdown
Two-way communication lost

Communication test failed
Solution: Look at the display on the HP All-in-One. If the display is blank and the
On button is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly
connected to the HP All-in-One and plugged into a power outlet. Press the On button
to turn on the HP All-in-One.

Errors

269

Troubleshooting

Cause: The HP All-in-One is turned off.

Chapter 15

Cause:

The HP All-in-One is not connected to the computer.

Solution: If the HP All-in-One is not properly connected to the computer,
communication errors can occur. Make sure the USB cable is securely connected to
the HP All-in-One and the computer, as shown below.

For more information, see:
“Communication problems over a USB connection” on page 169

HP All-in-One not found
Cause: This error applies only to USB-connected devices. The USB cable is not
plugged in properly.
Solution: If the HP All-in-One is not properly connected to the computer,
communication errors can occur. Make sure the USB cable is securely connected to
the HP All-in-One and the computer, as shown below.

Troubleshooting

For more information, see:
“Communication problems over a USB connection” on page 169

270

Troubleshooting

Improper shutdown
Cause: The last time the HP All-in-One was used, it was not turned off properly. If
the HP All-in-One is turned off by turning off the switch on a power strip or by using
a wall switch, the device can be damaged.
Solution: Press the On button located on the control panel of the HP All-in-One to
turn the device on and off.

Two-way communication lost
Cause: The HP All-in-One is turned off.
Solution: Look at the display on the HP All-in-One. If the display is blank and the
On button is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly
connected to the HP All-in-One and plugged into a power outlet. Press the On button
to turn on the HP All-in-One.
Cause: The HP All-in-One is not connected to the computer.
Solution: If the HP All-in-One is not properly connected to the computer,
communication errors can occur. Make sure the USB cable is securely connected to
the HP All-in-One and the computer, as shown below.

For more information, see:
“Communication problems over a USB connection” on page 169

Ink cartridge messages
•
•
•
•

Calibration error
Cannot print
Incorrect ink cartridge(s)
The following ink cartridges cannot be used after device initialization and must be
replaced

Errors

271

Troubleshooting

The following is a list of ink cartridge error messages:

Chapter 15

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Ink cartridge problem
Ink cartridge(s) are empty
Ink cartridge(s) are expired
Ink delivery failure
Ink expiration near
Ink supply error
Non-HP ink
Original HP ink depleted
Print head assembly is stalled
Print head failure
Alignment failed
Replace ink cartridges soon
Scheduled maintenance
Wrong ink cartridge(s) installed
Ink cartridge is missing, incorrectly installed, or not intended for your device

Calibration error
Cause:

An incorrect type of paper is loaded in the input tray.

Solution: If you have color or photo paper loaded in the input tray when the printer
aligns, the calibration might fail. Load unused plain white letter or A4 paper into the
input tray, and then press OK on the control panel.

Cannot print
Cause:

The indicated ink cartridge(s) are out of ink.

Solution: Replace the indicated ink cartridge(s) immediately so that you can
resume printing.
The HP All-in-One cannot continue printing until the indicated ink cartridge(s) are
replaced. All printing will stop.
For more information, see:
“Replace the ink cartridges” on page 159

Incorrect ink cartridge(s)
Cause:

The wrong ink cartridge(s) are installed.

Troubleshooting

Solution: The indicated ink cartridge(s) cannot be used after the device has
undergone first-time setup. Replace the ink cartridge(s) with the appropriate ink
cartridges for the HP All-in-One. To find out the reorder number for all the ink
cartridges that the HP All-in-One supports, see the printed documentation that came
with the HP All-in-One.
For more information, see:
“Replace the ink cartridges” on page 159

272

Troubleshooting

Cause: The ink cartridge(s) are not intended for use in this device.
Solution:

Contact HP support. Go to:

www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.

The following ink cartridges cannot be used after device initialization and must be
replaced
Cause: The wrong ink cartridge(s) are installed.
Solution: The indicated ink cartridge(s) cannot be used after the device has
undergone first-time setup. Replace the ink cartridge(s) with the appropriate ink
cartridges for the HP All-in-One. To find out the reorder number for all the ink
cartridges that the HP All-in-One supports, see the printed documentation that came
with the HP All-in-One.
For more information, see:
“Replace the ink cartridges” on page 159
Cause: The ink cartridge(s) are not intended for use in this device.
Solution:

Contact HP support. Go to:

www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.

Ink cartridge problem
Cause: The indicated ink cartridge(s) are missing or are damaged.
Solution: Replace the indicated ink cartridge(s) immediately so that you can
resume printing. If there are no ink cartridges missing from the HP All-in-One, the ink
cartridge contacts might need to be cleaned.
If there are no ink cartridges missing from the HP All-in-One, and you still receive this
message after cleaning the ink cartridge contacts, you might have a damaged ink
cartridge. Check to see if your ink cartridge is still under warranty and the end of
warranty date has not been reached.
•
•

If the end of warranty date has been reached, purchase a new ink cartridge.
If the end of warranty date has not been reached, contact HP support. Go to
www.hp.com/support. If prompted, choose your country/region, and then click
Contact HP for information on calling for technical support.

•
•

Troubleshooting

For more information, see:
“Replace the ink cartridges” on page 159
“Clean the ink cartridge contacts” on page 163

Errors

273

Chapter 15

•
•

“Ink cartridge warranty information” on page 279
“Shop for ink supplies” on page 167

Ink cartridge(s) are empty
Cause:
Solution:

The indicated ink cartridge(s) are out of ink.
Replace the indicated ink cartridge(s) with new ink cartridge(s).

For more information, see:
“Replace the ink cartridges” on page 159

Ink cartridge(s) are expired
Cause:

The ink in the indicated ink cartridge(s) is at the expiration date.

Solution: Each ink cartridge has an expiration date. The purpose of expiration is to
protect the printing system and to ensure ink quality. When you receive an ink
cartridge(s) are expired message, remove and replace the expired ink cartridge, and
then close the message. You can also continue printing without replacing the ink
cartridge, by following the instructions on the HP All-in-One or the ink cartridge
expiration message on your computer screen. HP recommends replacing the expired
ink cartridges. HP cannot guarantee the quality or reliability of expired ink cartridges.
Device service or repairs required as a result of using expired ink will not be covered
under warranty.
For more information, see:
“Replace the ink cartridges” on page 159

Ink delivery failure
Cause: The print head assembly or the ink delivery system has failed and the
HP All-in-One can no longer print.
Solution: Turn the HP All-in-One off, unplug the power cord, and wait 10 seconds.
Then, plug the power cord back in and turn the device on.
If you continue to receive this message, write down the error code provided in the
message, and then contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.

Ink expiration near
Troubleshooting

Cause:
Solution:

274

Troubleshooting

The ink in the indicated ink cartridge(s) is near expiration.
One or more of the ink cartridges are near their expiration date.

Each ink cartridge has an expiration date. The purpose of expiration is to protect the
printing system and to ensure ink quality. When you receive an ink cartridge(s) are
expired message, remove and replace the expired ink cartridge, and then close the
message. You can also continue printing without replacing the ink cartridge, by
following the instructions on the HP All-in-One or the ink cartridge expiration message
on your computer screen. HP recommends replacing the expired ink cartridges. HP
cannot guarantee the quality or reliability of expired ink cartridges. Device service or
repairs required as a result of using expired ink will not be covered under warranty.
For more information, see:
“Replace the ink cartridges” on page 159

Ink supply error
Cause: The indicated ink cartridge was removed during maintenance.
Solution: Replace the indicated ink cartridge with the previous ink cartridge during
the maintenance procedure. After the maintenance procedure is complete, you can
insert the new ink cartridge.
For more information, see:
“Replace the ink cartridges” on page 159

Non-HP ink
Cause: The HP All-in-One detected non-HP ink.
Solution:

Replace the indicated ink cartridge(s).

HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges
are designed and tested with HP printers to help you easily produce great results,
time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP ink. Printer
service or repairs required as a result of printer failure or damage attributable to
the use of non-HP ink will not be covered under warranty.
If you believe you purchased genuine HP ink cartridge(s), go to:
www.hp.com/go/anticounterfeit
For more information, see:
“Replace the ink cartridges” on page 159

Original HP ink depleted
Solution: Replace the indicated ink cartridge(s) or press OK on the control panel
to continue.

Errors

275

Troubleshooting

Cause: The original HP ink in the indicated ink cartridge(s) has been depleted.

Chapter 15

HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges
are designed and tested with HP printers to help you easily produce great results,
time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP ink. Printer
service or repairs required as a result of printer failure or damage attributable to
the use of non-HP ink will not be covered under warranty.
For more information, see:
“Replace the ink cartridges” on page 159

Print head assembly is stalled
Cause:
Solution:

The print head assembly is blocked.
Remove any objects that are blocking the print head assembly.

To clear the print head assembly
1. Open the ink cartridge door by lifting from the front center of the device, until the
door locks into place.

2. Remove any objects that are blocking the print head assembly, including any
packing materials.
3. Turn the HP All-in-One off, then turn it on again.
4. Close the ink cartridge door.

Print head failure
Cause: The print head assembly or the ink delivery system has failed and the
HP All-in-One can no longer print.
Solution:

Contact HP support. Go to:

www.hp.com/support
Troubleshooting

If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.

276

Troubleshooting

Alignment failed
Cause: An incorrect type of paper is loaded in the input tray.
Solution: If you have color or photo paper loaded in the input tray when you align
the printer, the alignment might fail. Load unused plain white letter or A4 paper into
the input tray, and then try the alignment again. If the alignment fails again, you might
have a defective sensor.
Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Cause: The print head assembly or sensor is defective.
Solution:

Contact HP support. Go to:

www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.

Replace ink cartridges soon
Cause: The indicated ink cartridge is estimated to be low on ink and might need to
be replaced soon.
Solution: You might be able to continue printing for a short period of time with ink
remaining in the print head assembly. Replace the indicated ink cartridge(s) or follow
the prompts on the display or computer screen to continue.
For more information, see:
“Replace the ink cartridges” on page 159

Scheduled maintenance
Cause: The HP All-in-One performs a periodic maintenance procedure to ensure
excellent print quality.
Solution: Load unused plain white letter or A4 paper in the input tray. Then follow
the prompts on the display or computer screen to continue.

Wrong ink cartridge(s) installed
Solution: The first time you set up and use the HP All-in-One, make sure to install
the ink cartridges that were shipped with your device. The ink in these ink cartridges
is specially formulated to mix with the ink in the print head assembly.

Errors

277

Troubleshooting

Cause: The wrong ink cartridge(s) are installed.

Chapter 15

To resolve this error, replace the affected ink cartridge(s) with the ink cartridges that
were shipped with the HP All-in-One.
For more information, see:
“Replace the ink cartridges” on page 159

Ink cartridge is missing, incorrectly installed, or not intended for your device
Cause:

One or more ink cartridges are missing.

Solution: Remove and reinsert the ink cartridges and verify that they are fully
inserted and locked in place.
Cause: One or more of the ink cartridges are not installed or are installed
incorrectly.
Solution: Remove and reinsert the ink cartridges and verify that they are fully
inserted and locked in place. If the problem persists, clean the copper-colored
contacts of the ink cartridges.
For more information, see:
•
•

“Replace the ink cartridges” on page 159
“Clean the ink cartridge contacts” on page 163

Cause:

The ink cartridge is defective or not intended for use in this device.

Solution: Replace the indicated ink cartridge(s) immediately so that you can
resume printing. If there are no ink cartridges missing from the HP All-in-One, the ink
cartridge contacts might need to be cleaned.
If there are no ink cartridges missing from the HP All-in-One, and you still receive this
message after cleaning the ink cartridge contacts, you might have a damaged ink
cartridge. Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
For more information, see:
“Replace the ink cartridges” on page 159
Cause:

The wrong ink cartridge(s) are installed.

Solution: The first time you set up and use the HP All-in-One, make sure to install
the ink cartridges that were shipped with your device. The ink in these ink cartridges
is specially formulated to mix with the ink in the print head assembly.

Troubleshooting

To resolve this error, replace the affected ink cartridge(s) with the ink cartridges that
were shipped with the HP All-in-One.
For more information, see:
“Replace the ink cartridges” on page 159

278

Troubleshooting

16 HP warranty and support
HP warranty and support

Hewlett-Packard provides Internet and phone support for the HP All-in-One.
This section contains the following topics:
Warranty
•
•

Ink cartridge warranty information

•
•

Support process
Before you call HP support

•

HP support by phone

•
•

Additional warranty options
HP Quick Exchange Service (Japan)

•

Call HP Korea customer support

•
•

Prepare the HP All-in-One for shipment
Pack the HP All-in-One

Warranty
For more information about the warranty, see the printed documentation that came with the HP Allin-One.

Ink cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printing device.
This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished,
misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end
of warranty date has not been reached. The end of warranty date, in YYYY/MM/DD format, may be
found on the product as indicated:

For a copy of the HP Limited Warranty Statement, see the printed documentation that came with the
HP All-in-One.

HP warranty and support

279

Chapter 16

Support process
If you have a problem, follow these steps:
1. Check the documentation that came with the HP All-in-One.
HP warranty and support

Visit the HP online support Web site at www.hp.com/support. HP online support is available to
all HP customers. It is the fastest source for up-to-date device information and expert assistance
and includes the following features:
•

Fast access to qualified online support specialists

•

Software and driver updates for the HP All-in-One

•

Valuable HP All-in-One and troubleshooting information for common problems

•

Proactive device updates, support alerts, and HP newsgrams that are available when you
register the HP All-in-One

Call HP support. Support options and availability vary by device, country/region, and language.

Before you call HP support
Software programs from other companies might be included with the HP All-in-One. If you experience
problems with any of those programs, you will receive the best technical assistance by calling the
experts at that company.
NOTE: This information does not apply to customers in Japan. For information on service
options in Japan, see “HP Quick Exchange Service (Japan)” on page 282.
If you need to contact HP support, do the following before you call:
1. Make sure that:
a.

The HP All-in-One is plugged in and turned on.

b. The specified ink cartridges are installed correctly.
c.
2.

The recommended paper is properly loaded in the input tray.

Reset the HP All-in-One:
a.

Turn off the HP All-in-One by pressing the On button.

b. Unplug the power cord from the back of the HP All-in-One.
c.

Plug the power cord back into the HP All-in-One.

d. Turn on the HP All-in-One by pressing the On button.
3.

To find support and warranty information, go to the HP Web site at www.hp.com/support. If
prompted, choose your country/region, and then click Contact HP for information on calling for
technical support.
Check the HP Web site for updated information or troubleshooting tips for the HP All-in-One .

If you are still experiencing problems and need to speak with an HP support representative, do
the following:
a. Have the specific name of the HP All-in-One, as it appears on the control panel, available.
b. Print a self-test report.
c. Make a color copy to have available as a sample printout.
d. Be prepared to describe your problem in detail.
e.

Have your serial number ready.
You can view the serial number by looking at the sticker on the rear side of the HP All-inOne. The serial number is the 10-character code in the upper left corner of the sticker.

Call HP support. Be near the HP All-in-One when you call.

Related topics
“Print a self-test report” on page 149

280

HP warranty and support

HP support by phone
For a list of support phone numbers, see the printed documentation that came with the device.
•

Phone support period

•

Placing a call

•

After the phone support period

Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin America (including
Mexico). To determine the duration of phone support in Europe, the Middle East, and Africa, go to
www.hp.com/support. Standard phone company charges apply.

Placing a call
Call HP support while you are in front of the computer and the HP All-in-One. Be prepared to provide
the following information:
•

Model number (located on the label on the front of the HP All-in-One)

•

Serial number (located on the back or bottom of the HP All-in-One)

•

Messages that appear when the situation occurs

•

Answers to these questions:
•

Has this situation happened before?

•

Can you re-create it?

•

Did you add any new hardware or software to your computer at about the time that this
situation began?
Did anything else occur prior to this situation (such as a thunderstorm, HP All-in-One was
moved, etc.)?

•

After the phone support period
After the phone support period, help is available from HP at an additional cost. Help may also be
available at the HP online support Web site: www.hp.com/support. Contact your HP dealer or call
the support phone number for your country/region to learn more about support options.

Additional warranty options
Extended service plans are available for the HP All-in-One at additional costs. Go to www.hp.com/
support, select your country/region and language, then explore the services and warranty area for
information about the extended service plans.

HP support by phone

281

HP warranty and support

This section contains the following topics:

Chapter 16

HP Quick Exchange Service (Japan)

HP warranty and support
For instructions on how to pack your device for exchange, see “Pack the HP All-in-One”
on page 284.

Call HP Korea customer support

282

HP warranty and support

If, after contacting HP support or returning to the point of purchase, you are requested to send the
HP All-in-One in for service, make sure you remove and keep the following items before returning
your device:
•
The control panel faceplate
•

The power cord, USB cable, and any other cable connected to the HP All-in-One
CAUTION: The replacement HP All-in-One will not be shipped with a power cord. Store
the power cord in a safe place until the replacement HP All-in-One arrives.

•

Any paper loaded in the input tray

•

Remove any originals you might have loaded in the HP All-in-One

This section contains the following topics:
•

Secure the ink system

•

Remove the control panel faceplate

Secure the ink system
Contact HP support for information about how you should secure the ink system to prevent ink from
leaking in the HP All-in-One during shipment. They might instruct you to replace the ink cartridges
with replacement ink cartridges.
If you receive a replacement HP All-in-One, refer to the instructions included in the box for information
about how to secure the ink system. The replacement HP All-in-One might come with ink cartridges
that you can use to install in your device to prevent the ink system from leaking during shipment.
NOTE: This information does not apply to customers in Japan. For information on service
options in Japan, see “HP Quick Exchange Service (Japan)” on page 282.
Related topics
“Replace the ink cartridges” on page 159

Remove the control panel faceplate
Remove the control panel faceplate before returning the HP All-in-One for repair.
NOTE: This information does not apply to customers in Japan. For information on service
options in Japan, see “HP Quick Exchange Service (Japan)” on page 282.
CAUTION: The HP All-in-One must be unplugged before following these steps.
To remove the control panel faceplate
1. Press the On button to turn off the HP All-in-One.
2.

Unplug the power cord, and then disconnect it from the HP All-in-One. Do not return the power
cord with the HP All-in-One.

Remove the control panel faceplate as follows:
a. Place your hands on each side of the control panel faceplate.
b. Use your fingertips to pry the control panel faceplate off.

Prepare the HP All-in-One for shipment

283

HP warranty and support

Prepare the HP All-in-One for shipment

Chapter 16

HP warranty and support
4.

Retain the control panel faceplate. Do not return the control panel faceplate with the HP All-inOne.
CAUTION: The replacement HP All-in-One might not come with a control panel faceplate.
Store your control panel faceplate in a safe place, and when the replacement HP All-in-One
arrives, reattach your control panel faceplate. You must attach your control panel faceplate
to use the control panel functions on the replacement HP All-in-One.
NOTE: See the Setup Guide that came with the HP All-in-One for instructions on how to
attach your control panel faceplate. The replacement HP All-in-One might come with
instructions for setting up your device.

Pack the HP All-in-One
Complete the following steps after you have prepared the HP All-in-One for shipment.
To pack the HP All-in-One
1. If available, pack the HP All-in-One for shipment by using the original packing materials or the
packaging materials that came with your exchange device.

284

HP warranty and support

Include the following items in the box:
•

A complete description of symptoms for service personnel (samples of print quality problems
are helpful).

•

A copy of the sales slip or other proof of purchase to establish the warranty coverage period.

•

Your name, address, and a phone number where you can be reached during the day.

Pack the HP All-in-One

285

HP warranty and support

If you do not have the original packaging materials, please use other adequate packaging
materials. Shipping damage caused by improper packaging and/or improper transportation is
not covered under the warranty.
Place the return shipping label on the outside of the box.

Chapter 16

HP warranty and support
286

HP warranty and support

17 Technical information
The technical specifications and international regulatory information for the HP All-in-One are
provided in this section.
For additional specifications, see the printed documentation that came with the HP All-in-One.
This section contains the following topics:
•

Specifications

•

Environmental product stewardship program

•

Regulatory notices

•

Regulatory wireless statements

•

Declaration of conformity (European Economic Area)

•

HP Photosmart C7200 All-in-One series declaration of conformity

Technical specifications for the HP All-in-One are provided in this section. For additional
specifications, see the printed documentation that came with the HP All-in-One.
System requirements
Software and system requirements are located in the Readme file.
For information about future operating system releases and support, visit the HP online support Web
site at www.hp.com/support.
Paper specifications
Type

Paper weight

Input tray*

Output tray†

Photo tray*

Plain paper

20 to 24 lb. (75 to
90 gsm)

Up to 100 (20 lb.
paper)

50 (20 lb. paper)

n/a

Legal paper

20 to 24 lb. (75 to
90 gsm)

Up to 100 (20 lb.
paper)

50 (20 lb. paper)

n/a

Cards

110 lb. index max
(200 gsm)

Up to 40

Up to 20

Envelopes

20 to 24 lb. (75 to
90 gsm)

Up to 10

n/a

Transparency film

N/A

Up to 30

15 or fewer

n/a

Labels

N/A

Up to 30

n/a

4 x 6 inch (10 x 15 cm)
Photo paper

145 lb.

Up to 30

Up to 20

8.5 x 11 inch (216 x 279
mm) Photo paper

N/A

Up to 30

n/a

*
†
*

(236 gsm)

Maximum capacity.
Output tray capacity is affected by the type of paper and the amount of ink you are using.
HP recommends emptying the output tray frequently.
Maximum capacity.
NOTE: For a complete list of supported media sizes, see the printer driver.

Technical information

287

Technical information

Specifications

Chapter 17
Print specifications
•
Up to 1200 x 1200 rendered dpi black when printing from a computer
•

Up to 4800 x 1200 optimized dpi color when printing from a computer and 1200-input dpi

•
•

Print speeds vary according to the complexity of the document
Panorama-size printing

•

Method: drop-on-demand thermal inkjet

•
•

Language: PCL3 GUI
Duty cycle: Up to 3000 printed pages per month

Copy specifications
•
Copy resolution up to 4800 x 4800
•

Digital image processing

•

Up to 99 copies from original (varies by model)

•

Zoom to 400%, fit to page (varies by model)

•

Copy speeds vary according to the complexity of the document

Scan specifications
•
Image editor included
Technical information

•

Integrated OCR software automatically converts scanned text to editable text (if installed)

•

Twain-compliant interface

•

Resolution: up to 4800 x 9600 dpi optical (varies by model); 19200 dpi enhanced (software)

•

Color: 48-bit color, 8-bit grayscale (256 levels of gray)

•

Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)

Fax specifications
•
Walk-up black-and-white and color fax capability.
•

Up to 110 speed dials (varies by model).

•

Up to 120-page memory (varies by model, based on ITU-T Test Image #1 at standard
resolution). More complicated pages or higher resolution takes longer and uses more memory.

•

Manual fax send and receive.

•
•

Automatic busy redial up to five times (varies by model).
Automatic no-answer redial one time (varies by model).

•

Confirmation and activity reports.

•
•

CCITT/ITU Group 3 fax with Error Correction Mode.
33.6 Kbps transmission.

•

3 seconds per page speed at 33.6 Kbps (based on ITU-T Test Image #1 at standard resolution).
More complicated pages or higher resolution take longer and use more memory.

•

Ring detect with automatic fax/answering machine switching.
Photo (dpi)

Very Fine (dpi)

Fine (dpi)

Standard (dpi)

Black

200 x 200 (8-bit
grayscale)

300 x 300

200 x 200

200 x 100

Color

200 x 200

Print resolution
To find out about the printer resolution, see the printer software. For more information, see “View
the print resolution” on page 85.
Ink cartridge yield
Visit www.hp.com/pageyield for more information on estimated cartridge yields.
288

Technical information

Acoustic information
If you have Internet access, you can get acoustic information from the HP Web site. Go to:
www.hp.com/support.

Duplexer paper specifications
Table 17-1 Media weight
Type

Size

Weight

Paper

Letter: 8.5 x 11 inches

60 to 90 g/m2 (16 to 24 lb.)

Executive: 7.25 x 10.5 inches
A4: 210 x 297 mm
A5: 148 x 210 mm
Brochure paper

Letter: 8.5 x 11 inches

Up to 180 g/m2 (48 lb. bond)

A4: 210 x 297 mm
Cards and photos

4 x 6 inches

Up to 200 g/m2 (110 lb. index)
Technical information

5 x 8 inches
10 x 15 cm
A6: 105 x 148.5 mm
Hagaki: 100 x 148 mm
Alignment skew
.006 mm/mm on plain paper (2nd side)
Media type
•
Plain paper
•

Inkjet paper

•

Brochure paper

•

Index cards, post cards, Hagaki
NOTE: Media type availability varies by country/region.

Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept
to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been
designed to separate easily. Fasteners and other connections are easy to locate, access, and
remove using common tools. High priority parts have been designed to access quickly for efficient
disassembly and repair.
For more information, visit HP’s Commitment to the Environment Web site at:
www.hp.com/hpinfo/globalcitizenship/environment/index.html
This section contains the following topics:
•

Paper use

•
•

Plastics
Material safety data sheets

•

Recycling program

•

HP inkjet supplies recycling program

Environmental product stewardship program

289

Chapter 17
•
•
•
•
•
•

Energy consumption
Special handling of materials
Attention California users
NDL battery disposal
Taiwan battery statement
Disposal of Waste Equipment by Users in Private Households in the European Union

Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.

Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of product life.

Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at:
www.hp.com/go/msds
Technical information

Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions,
and partners with some of the largest electronic recycling centers throughout the world. HP
conserves resources by reselling some of its most popular products. For more information regarding
recycling of HP products, please visit:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/

HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used print cartridges and ink cartridges
free of charge. For more information, go to the following Web site:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/

Energy consumption
This product is designed to reduce power consumption and save natural resources without
compromising product performance. It has been designed to reduce total energy consumption both
during operation and when the device is not active. Specific information on power consumption may
be found in the printed documentation that came with the HP All-in-One.

Special handling of materials
This HP product contains a lithium-manganese dioxide battery located on the main printed circuit
assembly that may require special handling at end-of-life.

Attention California users
The battery supplied with this product may contain perchlorate material. Special handling may apply.
For more information, go to the following Web site:
www.dtsc.ca.gov/hazardouswaste/perchlorate

NDL battery disposal
Dit HP Product bevat een lithium-manganese-dioxide
batterij. Deze bevindt zich op de hoofdprintplaat.
Wanneer deze batterij leeg is, moet deze volgens de
geldende regels worden afgevoerd.

290

Technical information

Taiwan battery statement

Česky

Likvidace vysloužilého zařízení uživateli v domácnosti v zemích EU
Tato značka na produktu nebo na jeho obalu označuje, že tento produkt nesmí být likvidován prostým vyhozením do běžného domovního odpadu. Odpovídáte za to, že vysloužilé
zařízení bude předáno k likvidaci do stanovených sběrných míst určených k recyklaci vysloužilých elektrických a elektronických zařízení. Likvidace vysloužilého zařízení samostatným
sběrem a recyklací napomáhá zachování přírodních zdrojů a zajišťuje, že recyklace proběhne způsobem chránícím lidské zdraví a životní prostředí. Další informace o tom, kam můžete
vysloužilé zařízení předat k recyklaci, můžete získat od úřadů místní samosprávy, od společnosti provádějící svoz a likvidaci domovního odpadu nebo v obchodě, kde jste produkt
zakoupili.

Dansk

Bortskaffelse af affaldsudstyr for brugere i private husholdninger i EU
Dette symbol på produktet eller på dets emballage indikerer, at produktet ikke må bortskaffes sammen med andet husholdningsaffald. I stedet er det dit ansvar at bortskaffe affaldsudstyr
ved at aflevere det på dertil beregnede indsamlingssteder med henblik på genbrug af elektrisk og elektronisk affaldsudstyr. Den separate indsamling og genbrug af dit affaldsudstyr på
tidspunktet for bortskaffelse er med til at bevare naturlige ressourcer og sikre, at genbrug finder sted på en måde, der beskytter menneskers helbred samt miljøet. Hvis du vil vide mere
om, hvor du kan aflevere dit affaldsudstyr til genbrug, kan du kontakte kommunen, det lokale renovationsvæsen eller den forretning, hvor du købte produktet.

Nederlands

Afvoer van afgedankte apparatuur door gebruikers in particuliere huishoudens in de Europese Unie
Dit symbool op het product of de verpakking geeft aan dat dit product niet mag worden afgevoerd met het huishoudelijk afval. Het is uw verantwoordelijkheid uw afgedankte apparatuur
af te leveren op een aangewezen inzamelpunt voor de verwerking van afgedankte elektrische en elektronische apparatuur. De gescheiden inzameling en verwerking van uw afgedankte
apparatuur draagt bij tot het sparen van natuurlijke bronnen en tot het hergebruik van materiaal op een wijze die de volksgezondheid en het milieu beschermt. Voor meer informatie over
waar u uw afgedankte apparatuur kunt inleveren voor recycling kunt u contact opnemen met het gemeentehuis in uw woonplaats, de reinigingsdienst of de winkel waar u het product
hebt aangeschaft.

Eesti

Eramajapidamistes kasutuselt kõrvaldatavate seadmete käitlemine Euroopa Liidus
Kui tootel või toote pakendil on see sümbol, ei tohi seda toodet visata olmejäätmete hulka. Teie kohus on viia tarbetuks muutunud seade selleks ettenähtud elektri- ja elektroonikaseadmete
utiliseerimiskohta. Utiliseeritavate seadmete eraldi kogumine ja käitlemine aitab säästa loodusvarasid ning tagada, et käitlemine toimub inimeste tervisele ja keskkonnale ohutult.
Lisateavet selle kohta, kuhu saate utiliseeritava seadme käitlemiseks viia, saate küsida kohalikust omavalitsusest, olmejäätmete utiliseerimispunktist või kauplusest, kust te seadme
ostsite.

Suomi

Hävitettävien laitteiden käsittely kotitalouksissa Euroopan unionin alueella
Tämä tuotteessa tai sen pakkauksessa oleva merkintä osoittaa, että tuotetta ei saa hävittää talousjätteiden mukana. Käyttäjän velvollisuus on huolehtia siitä, että hävitettävä laite
toimitetaan sähkö- ja elektroniikkalaiteromun keräyspisteeseen. Hävitettävien laitteiden erillinen keräys ja kierrätys säästää luonnonvaroja. Näin toimimalla varmistetaan myös,
että kierrätys tapahtuu tavalla, joka suojelee ihmisten terveyttä ja ympäristöä. Saat tarvittaessa lisätietoja jätteiden kierrätyspaikoista paikallisilta viranomaisilta, jäteyhtiöiltä tai tuotteen
jälleenmyyjältä.

Ελληνικά

Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση
Το παρόν σύμβολο στον εξοπλισμό ή στη συσκευασία του υποδεικνύει ότι το προϊόν αυτό δεν πρέπει να πεταχτεί μαζί με άλλα οικιακά απορρίμματα. Αντίθετα, ευθύνη σας είναι να
απορρίψετε τις άχρηστες συσκευές σε μια καθορισμένη μονάδα συλλογής απορριμμάτων για την ανακύκλωση άχρηστου ηλεκτρικού και ηλεκτρονικού εξοπλισμού. Η χωριστή συλλογή και
ανακύκλωση των άχρηστων συσκευών θα συμβάλει στη διατήρηση των φυσικών πόρων και στη διασφάλιση ότι θα ανακυκλωθούν με τέτοιον τρόπο, ώστε να προστατεύεται η υγεία των
ανθρώπων και το περιβάλλον. Για περισσότερες πληροφορίες σχετικά με το πού μπορείτε να απορρίψετε τις άχρηστες συσκευές για ανακύκλωση, επικοινωνήστε με τις κατά τόπους αρμόδιες
αρχές ή με το κατάστημα από το οποίο αγοράσατε το προϊόν.

Magyar

A hulladékanyagok kezelése a magánháztartásokban az Európai Unióban
Ez a szimbólum, amely a terméken vagy annak csomagolásán van feltüntetve, azt jelzi, hogy a termék nem kezelhető együtt az egyéb háztartási hulladékkal. Az Ön feladata,
hogy a készülék hulladékanyagait eljuttassa olyan kijelölt gyűjtőhelyre, amely az elektromos hulladékanyagok és az elektronikus berendezések újrahasznosításával foglalkozik.
A hulladékanyagok elkülönített gyűjtése és újrahasznosítása hozzájárul a természeti erőforrások megőrzéséhez, egyúttal azt is biztosítja, hogy a hulladék újrahasznosítása az
egészségre és a környezetre nem ártalmas módon történik. Ha tájékoztatást szeretne kapni azokról a helyekről, ahol leadhatja újrahasznosításra a hulladékanyagokat, forduljon
a helyi önkormányzathoz, a háztartási hulladék begyűjtésével foglalkozó vállalathoz vagy a termék forgalmazójához.

Latviski

Lietotāju atbrīvošanās no nederīgām ierīcēm Eiropas Savienības privātajās mājsaimniecībās
Šis simbols uz ierīces vai tās iepakojuma norāda, ka šo ierīci nedrīkst izmest kopā ar pārējiem mājsaimniecības atkritumiem. Jūs esat atbildīgs par atbrīvošanos no nederīgās ierīces,
to nododot norādītajā savākšanas vietā, lai tiktu veikta nederīgā elektriskā un elektroniskā aprīkojuma otrreizējā pārstrāde. Speciāla nederīgās ierīces savākšana un otrreizējā pārstrāde
palīdz taupīt dabas resursus un nodrošina tādu otrreizējo pārstrādi, kas sargā cilvēku veselību un apkārtējo vidi. Lai iegūtu papildu informāciju par to, kur otrreizējai pārstrādei var
nogādāt nederīgo ierīci, lūdzu, sazinieties ar vietējo pašvaldību, mājsaimniecības atkritumu savākšanas dienestu vai veikalu, kurā iegādājāties šo ierīci.

Lietuviškai

Europos Sąjungos vartotojų ir privačių namų ūkių atliekamos įrangos išmetimas
Šis simbolis ant produkto arba jo pakuotės nurodo, kad produktas negali būti išmestas kartu su kitomis namų ūkio atliekomis. Jūs privalote išmesti savo atliekamą įrangą atiduodami ją
į atliekamos elektronikos ir elektros įrangos perdirbimo punktus. Jei atliekama įranga bus atskirai surenkama ir perdirbama, bus išsaugomi natūralūs ištekliai ir užtikrinama, kad įranga
yra perdirbta žmogaus sveikatą ir gamtą tausojančiu būdu. Dėl informacijos apie tai, kur galite išmesti atliekamą perdirbti skirtą įrangą kreipkitės į atitinkamą vietos tarnybą, namų ūkio
atliekų išvežimo tarnybą arba į parduotuvę, kurioje pirkote produktą.
Utylizacja zużytego sprzętu przez użytkowników domowych w Unii Europejskiej
Symbol ten umieszczony na produkcie lub opakowaniu oznacza, że tego produktu nie należy wyrzucać razem z innymi odpadami domowymi. Użytkownik jest odpowiedzialny za
dostarczenie zużytego sprzętu do wyznaczonego punktu gromadzenia zużytych urządzeń elektrycznych i elektronicznych. Gromadzenie osobno i recykling tego typu odpadów
przyczynia się do ochrony zasobów naturalnych i jest bezpieczny dla zdrowia i środowiska naturalnego. Dalsze informacje na temat sposobu utylizacji zużytych urządzeń można
uzyskać u odpowiednich władz lokalnych, w przedsiębiorstwie zajmującym się usuwaniem odpadów lub w miejscu zakupu produktu.
Descarte de equipamentos por usuários em residências da União Européia
Este símbolo no produto ou na embalagem indica que o produto não pode ser descartado junto com o lixo doméstico. No entanto, é sua responsabilidade levar os equipamentos
a serem descartados a um ponto de coleta designado para a reciclagem de equipamentos eletro-eletrônicos. A coleta separada e a reciclagem dos equipamentos no momento do
descarte ajudam na conservação dos recursos naturais e garantem que os equipamentos serão reciclados de forma a proteger a saúde das pessoas e o meio ambiente. Para obter mais
informações sobre onde descartar equipamentos para reciclagem, entre em contato com o escritório local de sua cidade, o serviço de limpeza pública de seu bairro ou a loja em que
adquiriu o produto.
Postup používateľov v krajinách Európskej únie pri vyhadzovaní zariadenia v domácom používaní do odpadu
Tento symbol na produkte alebo na jeho obale znamená, že nesmie by vyhodený s iným komunálnym odpadom. Namiesto toho máte povinnos odovzda toto zariadenie na zbernom
mieste, kde sa zabezpečuje recyklácia elektrických a elektronických zariadení. Separovaný zber a recyklácia zariadenia určeného na odpad pomôže chráni prírodné zdroje a
zabezpečí taký spôsob recyklácie, ktorý bude chráni ľudské zdravie a životné prostredie. Ďalšie informácie o separovanom zbere a recyklácii získate na miestnom obecnom úrade,
vo firme zabezpečujúcej zber vášho komunálneho odpadu alebo v predajni, kde ste produkt kúpili.
Ravnanje z odpadno opremo v gospodinjstvih znotraj Evropske unije
Ta znak na izdelku ali embalaži izdelka pomeni, da izdelka ne smete odlagati skupaj z drugimi gospodinjskimi odpadki. Odpadno opremo ste dolžni oddati na določenem zbirnem
mestu za recikliranje odpadne električne in elektronske opreme. Z ločenim zbiranjem in recikliranjem odpadne opreme ob odlaganju boste pomagali ohraniti naravne vire in zagotovili,
da bo odpadna oprema reciklirana tako, da se varuje zdravje ljudi in okolje. Več informacij o mestih, kjer lahko oddate odpadno opremo za recikliranje, lahko dobite na občini,
v komunalnem podjetju ali trgovini, kjer ste izdelek kupili.
Kassering av förbrukningsmaterial, för hem- och privatanvändare i EU
Produkter eller produktförpackningar med den här symbolen får inte kasseras med vanligt hushållsavfall. I stället har du ansvar för att produkten lämnas till en behörig återvinningsstation
för hantering av el- och elektronikprodukter. Genom att lämna kasserade produkter till återvinning hjälper du till att bevara våra gemensamma naturresurser. Dessutom skyddas både
människor och miljön när produkter återvinns på rätt sätt. Kommunala myndigheter, sophanteringsföretag eller butiken där varan köptes kan ge mer information om var du lämnar
kasserade produkter för återvinning.

Environmental product stewardship program

Technical information

English
Français
Deutsch
Italiano
Español

Eliminación de residuos de aparatos eléctricos y electrónicos por parte de usuarios domésticos en la Unión Europea
Este símbolo en el producto o en el embalaje indica que no se puede desechar el producto junto con los residuos domésticos. Por el contrario, si debe eliminar este tipo de residuo, es
responsabilidad del usuario entregarlo en un punto de recogida designado de reciclado de aparatos electrónicos y eléctricos. El reciclaje y la recogida por separado de estos residuos
en el momento de la eliminación ayudará a preservar recursos naturales y a garantizar que el reciclaje proteja la salud y el medio ambiente. Si desea información adicional sobre los
lugares donde puede dejar estos residuos para su reciclado, póngase en contacto con las autoridades locales de su ciudad, con el servicio de gestión de residuos domésticos o con la
tienda donde adquirió el producto.

Português

Smaltimento di apparecchiature da rottamare da parte di privati nell'Unione Europea
Questo simbolo che appare sul prodotto o sulla confezione indica che il prodotto non deve essere smaltito assieme agli altri rifiuti domestici. Gli utenti devono provvedere allo
smaltimento delle apparecchiature da rottamare portandole al luogo di raccolta indicato per il riciclaggio delle apparecchiature elettriche ed elettroniche. La raccolta e il riciclaggio
separati delle apparecchiature da rottamare in fase di smaltimento favoriscono la conservazione delle risorse naturali e garantiscono che tali apparecchiature vengano rottamate
nel rispetto dell'ambiente e della tutela della salute. Per ulteriori informazioni sui punti di raccolta delle apparecchiature da rottamare, contattare il proprio comune di residenza,
il servizio di smaltimento dei rifiuti locale o il negozio presso il quale è stato acquistato il prodotto.

Slovenčina

Entsorgung von Elektrogeräten durch Benutzer in privaten Haushalten in der EU
Dieses Symbol auf dem Produkt oder dessen Verpackung gibt an, dass das Produkt nicht zusammen mit dem Restmüll entsorgt werden darf. Es obliegt daher Ihrer Verantwortung, das
Gerät an einer entsprechenden Stelle für die Entsorgung oder Wiederverwertung von Elektrogeräten aller Art abzugeben (z.B. ein Wertstoffhof). Die separate Sammlung und das
Recyceln Ihrer alten Elektrogeräte zum Zeitpunkt ihrer Entsorgung trägt zum Schutz der Umwelt bei und gewährleistet, dass sie auf eine Art und Weise recycelt werden, die keine
Gefährdung für die Gesundheit des Menschen und der Umwelt darstellt. Weitere Informationen darüber, wo Sie alte Elektrogeräte zum Recyceln abgeben können, erhalten Sie bei
den örtlichen Behörden, Wertstoffhöfen oder dort, wo Sie das Gerät erworben haben.

Slovenščina

Évacuation des équipements usagés par les utilisateurs dans les foyers privés au sein de l'Union européenne
La présence de ce symbole sur le produit ou sur son emballage indique que vous ne pouvez pas vous débarrasser de ce produit de la même façon que vos déchets courants.
Au contraire, vous êtes responsable de l'évacuation de vos équipements usagés et, à cet effet, vous êtes tenu de les remettre à un point de collecte agréé pour le recyclage des
équipements électriques et électroniques usagés. Le tri, l'évacuation et le recyclage séparés de vos équipements usagés permettent de préserver les ressources naturelles et de s'assurer
que ces équipements sont recyclés dans le respect de la santé humaine et de l'environnement. Pour plus d'informations sur les lieux de collecte des équipements usagés, veuillez contacter
votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez acheté le produit.

Svenska

Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Polski

Disposal of Waste Equipment by Users in Private Households in the European
Union

291

Chapter 17

Regulatory notices
The HP All-in-One meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
•

Regulatory model identification number

•

FCC statement

•

Notice to users of the U.S. telephone network: FCC requirements

•

Note à l’attention des utilisateurs du réseau téléphonique canadien/notice to users of the
Canadian telephone network

•

Notice to users in the European Economic Area

•

Notice to users of the German telephone network

•

Australia wired fax statement

•

Notice to users in Korea

•

VCCI (Class B) compliance statement for users in Japan

•

Notice to users in Japan about power cord

•

Geräuschemission

Regulatory model identification number
Technical information

For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SDGOB-0713. This regulatory number should not be
confused with the marketing name (HP Photosmart C7200 All-in-One series, etc.) or product
numbers (CC567A, etc.).

292

Technical information

FCC statement

FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified
that the following notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

•

Reorient the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Technical information

•
•
•

For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
Modifications (part 15.21)
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by HP may void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.

Regulatory notices

293

Chapter 17

Notice to users of the U.S. telephone network: FCC requirements

Notice to users of the U.S. telephone network: FCC requirements
This equipment complies with FCC rules, Part 68. On this equipment is a label that
contains, among other information, the FCC Registration Number and Ringer Equivalent
Number (REN) for this equipment. If requested, provide this information to your telephone
company.
An FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using
a compatible modular jack which is Part 68 compliant. This equipment connects to the
telephone network through the following standard network interface jack: USOC
RJ-11C.
The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have all of those devices ring when your number is called. Too many devices
on one line might result in failure to ring in response to an incoming call. In most, but not
all, areas the sum of the RENs of all devices should not exceed five (5). To be certain of the
number of devices you may connect to your line, as determined by the REN, you should call
your local telephone company to determine the maximum REN for your calling area.
Technical information

If this equipment causes harm to the telephone network, your telephone company might
discontinue your service temporarily. If possible, they will notify you in advance. If advance
notice is not practical, you will be notified as soon as possible. You will also be advised of
your right to file a complaint with the FCC. Your telephone company might make changes
in its facilities, equipment, operations, or procedures that could affect the proper operation
of your equipment. If they do, you will be given advance notice so you will have the
opportunity to maintain uninterrupted service. If you experience trouble with this equipment,
please contact the manufacturer, or look elsewhere in this manual, for warranty or repair
information. Your telephone company might ask you to disconnect this equipment from the
network until the problem has been corrected or until you are sure that the equipment is not
malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact your state public utility commission, public service commission, or corporation commission for more information.
This equipment includes automatic dialing capability. When programming and/or making
test calls to emergency numbers:
•

Remain on the line and explain to the dispatcher the reason for the call.

•

Perform such activities in the off-peak hours, such as early morning or late evening.
Note The FCC hearing aid compatibility rules for telephones are not applicable
to this equipment.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device, including fax machines, to send any message unless
such message clearly contains in a margin at the top or bottom of each transmitted page
or on the first page of transmission, the date and time it is sent and an identification of the
business, other entity, or other individual sending the message and the telephone number
of the sending machine or such business, other entity, or individual. (The telephone number
provided might not be a 900 number or any other number for which charges exceed local
or long-distance transmission charges.) In order to program this information into your fax
machine, you should complete the steps described in the software.

294

Technical information

Note à l’attention des utilisateurs du réseau téléphonique canadien/notice to users of
the Canadian telephone network

Note à l’attention des utilisateurs du réseau téléphonique
canadien/Notice to users of the Canadian telephone network
Cet appareil est conforme aux spécifications techniques des équipements terminaux
d’Industrie Canada. Le numéro d’enregistrement atteste de la conformité de l’appareil.
L’abréviation IC qui précède le numéro d’enregistrement indique que l’enregistrement a été
effectué dans le cadre d’une Déclaration de conformité stipulant que les spécifications
techniques d’Industrie Canada ont été respectées. Néanmoins, cette abréviation ne signifie
en aucun cas que l’appareil a été validé par Industrie Canada.
Pour leur propre sécurité, les utilisateurs doivent s’assurer que les prises électriques reliées
à la terre de la source d’alimentation, des lignes téléphoniques et du circuit métallique
d’alimentation en eau sont, le cas échéant, branchées les unes aux autres. Cette précaution
est particulièrement importante dans les zones rurales.

Technical information

Remarque Le numéro REN (Ringer Equivalence Number) attribué à chaque
appareil terminal fournit une indication sur le nombre maximal de terminaux qui
peuvent être connectés à une interface téléphonique. La terminaison d’une
interface peut se composer de n’importe quelle combinaison d’appareils, à
condition que le total des numéros REN ne dépasse pas 5.
Basé sur les résultats de tests FCC Partie 68, le numéro REN de ce produit est 0.0B.
This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation IC before the
registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution might be particularly important in rural areas.
Note The REN (Ringer Equivalence Number) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface might consist
of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5.
The REN for this product is 0.0B, based on FCC Part 68 test results.

Regulatory notices

295

Chapter 17

Notice to users in the European Economic Area

This product is designed to be connected to the analog Switched Telecommunication
Networks (PSTN) of the European Economic Area (EEA) countries/regions.
Network compatibility depends on customer selected settings, which must be reset to use
the equipment on a telephone network in a country/region other than where the product
was purchased. Contact the vendor or Hewlett-Packard Company if additional product
support is necessary.

Technical information

This equipment has been certified by the manufacturer in accordance with Directive
1999/5/EC (annex II) for Pan-European single-terminal connection to the public switched
telephone network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the
unlikely event of problems with loop disconnect dialing, it is recommended to use this
equipment only with the DTMF tone dial setting.

Notice to users of the German telephone network

Hinweis für Benutzer des deutschen Telefonnetzwerks
Dieses HP-Fax ist nur für den Anschluss eines analogen Public Switched Telephone Network
(PSTN) gedacht. Schließen Sie den TAE N-Telefonstecker, der im Lieferumfang des
HP All-in-One enthalten ist, an die Wandsteckdose (TAE 6) Code N an. Dieses HP-Fax kann
als einzelnes Gerät und/oder in Verbindung (mit seriellem Anschluss) mit anderen zugelassenen Endgeräten verwendet werden.

Australia wired fax statement

In Australia, the HP device must be connected to Telecommunication Network through a line
cord which meets the requirements of the Technical Standard AS/ACIF S008.

Notice to users in Korea

296

Technical information

VCCI (Class B) compliance statement for users in Japan

Notice to users in Japan about power cord

Geräuschemission

Technical information

Geräuschemission
LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19

Regulatory wireless statements
This section contains the following regulatory information pertaining to wireless products:
•
•
•
•
•

Wireless: Exposure to radio frequency radiation
Wireless: Notice to users in Brazil
Wireless: Notice to users in Canada
European Union Regulatory Notice
Wireless: Notice to users in Taiwan

Wireless: Exposure to radio frequency radiation

Exposure to radio frequency radiation
Caution The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such a manner
that the potential for human contact during normal operation is minimized. This
product and any attached external antenna, if supported, shall be placed in such
a manner to minimize the potential for human contact during normal operation. In
order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna shall not be less than 20 cm (8 inches)
during normal operation.

Wireless: Notice to users in Brazil

Aviso aos usuários no Brasil
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção
contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário. (Res.ANATEL 282/2001).

Regulatory wireless statements

297

Chapter 17

Wireless: Notice to users in Canada

Notice to users in Canada/Note à l'attention des utilisateurs canadiens
For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise
emissions from the digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications. The internal wireless radio complies with RSS
210 and RSS GEN of Industry Canada.
Utiliser à l'intérieur. Le présent appareil numérique n'émet pas de bruit radioélectrique
dépassant les limites applicables aux appareils numériques de la classe B prescrites dans
le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications
du Canada. Le composant RF interne est conforme a la norme RSS-210 and RSS GEN
d'Industrie Canada.

European Union Regulatory Notice

European Union Regulatory Notice
Technical information

Products bearing the CE marking comply with the following EU Directives:
•
•

Low Voltage Directive 73/23/EEC
EMC Directive 2004/108/EC

CE compliance of this product is valid only if powered with the correct CE-marked AC
adapter provided by HP.
If this product has telecommunications functionality, it also complies with the essential
requirements of the following EU Directive:
•

R&TTE Directive 1999/5/EC

Compliance with these directives implies conformity to harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this
product or product family. This compliance is indicated by the following conformity
marking placed on the product.

The wireless telecommunications functionality of this product may be used in the following
EU and EFTA countries:
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland, and United Kingdom.
Products with 2.4-GHz wireless LAN devices
France
For 2.4 GHz Wireless LAN operation of this product certain restrictions apply: This
product may be used indoor for the entire 2400-2483.5 MHz frequency band (channels
1-13). For outdoor use, only 2400-2454 MHz frequency band (channels 1-9) may be used.
For the latest requirements, see http://www.art-telecom.fr.
Italy
License required for use. Verify with your dealer or directly with the General Direction for
Frequency Planning and Management (Direzione Generale Pianificazione e Gestione
Frequenze).

298

Technical information

Wireless: Notice to users in Taiwan

The Declaration of Conformity in this document complies with ISO/IEC 17050-1 and EN 17050-1. It
identifies the product, manufacturer’s name and address, and applicable specifications recognized
in the European community.

Declaration of conformity (European Economic Area)

299

Technical information

Declaration of conformity (European Economic Area)

Chapter 17

HP Photosmart C7200 All-in-One series declaration of conformity
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier's Name:

Hewlett-Packard Company

Supplier's Address:

16399 West Bernardo Drive
San Diego, CA 92127-1899, USA

DoC#: SDGOB-0713-rel.2.0

declares, that the product
Product Name and Model:
Regulatory Model Number:

HP Photosmart C7200 Series (CC564A)
1)

SDGOB-0713

Product Options:

ALL

Radio Module:

RSVLD-0608

Power Adapter:

0957-2230

conforms to the following Product Specifications and Regulations:

Technical information

EMC:

CISPR 22:1997+A1:2000+A2:2002 / EN 55022:1998+A1:2000+A2:2003 Class B
CISPR 24:1997+A1:2001+A2:2002 / EN 55024:1998+A1:2001+A2:2003 Class B
EN 301 489-1 V1.4.1:2002 / EN 301 489-17 V1.2.1:2002
IEC 61000-3-2:2000+A1:2000+A2:2005 / EN 61000-3-2:2000+A2:2005
IEC 61000-3-3:1994+A1:2001 / EN 61000-3-3:1995+A1:2001
FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 4
GB9254:1998, GB17625.1:2003

SAFETY:

IEC 60950-1:2001 / EN 60950-1:2001
IEC 60825-1 Ed. 1.2:2001 / EN 60825-1+A2+A1:2002 (LED)
GB4943:2001

TELECOM:

TBR21:1998, FCC Title 47 CFR Part 68, TIA/EIA/968:2001

RADIO:

EN 300 328 V1.6.1:2004-11

HEALTH:

EU: 1999/519/EC

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The product herewith complies with the requirements of the EMC Directive 2004/108/EC, the Low Voltage Directive
2006/95/EC and the R&TTE Directive 1999/5/EC and carries the CE-Marking accordingly.

Additional Information:
1.

This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation and
test reports, this number should not be confused with the marketing name or the product numbers.

San Diego, CA, USA
17 January, 2007

Local contact for regulatory topics only:

300

EMEA:

Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Böblingen, Germany

U.S.:

Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501

Technical information

Symbols/Numerics
10 x 15 cm photo paper
copy 122
load 78
specifications 287
2 pages on 1, print 95
4 pages on 1, print 95
4 x 6 inch (10 x 15 cm)
borderless photos
print 90
4 x 6 inch photo paper
copy 122
4 x 6 inch photo paper, load 78
802.11 wireless, configuration
page 56
802.3 wired, configuration
page 54

A
A4 paper, load 76
access point connection 39
access point HW address 59
ad hoc network 43
addresses, print 97
admin password 54
advanced network settings 50
after the support period 281
align printer 161
answer ring pattern 63
answering machine
fax tones recorded 236
set up with fax 242
authentication type 58
automatic document feeder
clean 173, 191
feeding problems,
troubleshoot 173, 191
load original 71
automatic fax reduction 145

B
backup fax reception 141
base station. See access point
connection
baud rate 30
best copy quality 124

blank
copy 219
scan 213
blank pages
fax 230
block numbers 145
blocked print head 178
Bluetooth
accessibility 33
connect to the HP All-inOne 32
passkey authentication 33
print from a computer 34
security settings 33
Bluetooth, configuration
page 59
booklet printing 93
borderless copies 126
borderless photos
copy has borders 218
crop is wrong 218
print 90
brightness, change in print 87
broadcast a fax 136
Browsing photos 27
buttons, control panel 13

C
calling card, fax using 133, 134
cancel
button 14
copy 129
fax 148
fax forwarding 143
print job 99
scan 119
scheduled fax 136
cartridges. See ink cartridges
CAT-5 Ethernet cable 38
channel, wireless
communication 57
choose paper 73
clean
automatic document
feeder 173, 191
exterior 157

glass 155
ink cartridge contacts 163
lid backing 157
print head 162
color
dull 195
fax 136
smeared 193
color graphics display
copy preview 121
crop original 128
shift margin 128
color tone, change in print 87
communication mode 57
communication problems
test failed 269
two-way communication
lost 271
computer modem, set up with
fax 242
computer-to-computer
network 43
config source (802.3 wired) 55
configuration page
802.11 wireless 56
802.3 wired 54
Bluetooth 59
general information 54
configuration source 56
confirmation reports, fax 150
connect
wired network (Ethernet) 37
wireless, with access
point 39
wireless, without access
point 39
connection
wireless 32
connection problems
device not found 270
fax 219, 225, 226, 231, 235
HP All-in-One does not turn
on 175
connection types supported
Bluetooth adapter 32

301

Index

Ethernet 31
printer sharing 36
contrast, fax 138
control panel
buttons 13
enter text and symbols 18
features 13
overview 12
copy
blank 219
borderless has borders 218
borderless photo 126
cancel 129
crop 128
crop is wrong 218
default settings 125
enlarge 127
fit to page fails 217
make a copy 121
margin shift 128
menu 16
missing information 216
number of copies 122
paper size 122
paper types,
recommended 123
photos, enhance 129
preview 121
quality 124
reduce 127
size, custom 127
smeared 193
specifications 288
speed 124
text, enhance 129
too dark 216
too light 216
troubleshooting 215
correct port test, fax 252
country/region, set 25
credit card, fax using 133, 134
crop
borderless copy is
wrong 218
fails 264
crop an original 128
crop photos 109
customer support
HP Quick Exchange Service
(Japan) 282
Korea 282
warranty 279, 281

302

D
damaged, ink cartridge 273
dark copy 216
darken
copies 125
faxes 138
date 26
declaration of conformity
European Economic
Area 299
United States 300
default gateway 56
default gateway (802.3
wired) 55
default printer, set as 84
default settings
fax 139
restore 28
default settings, restore 49
delete
faxes from memory 143
speed dial entries 67
device
no response 201
not found 270
device address (Bluetooth) 59
device name (Bluetooth) 59
dial tone test, fax 254
direction pad 13
disconnected error 265
Display
icons 14
display
change language 177
change measurements 177
sleep state 15
distinctive ringing 63
DNS server 57
DNS server (802.3 wired) 55
documents
edit scanned 118
scan 115
double-sided prints 93

E
ECM. See error correction mode
edit
scan preview 118
edit scanned images 118
Embedded Web Server
access using web
browser 52

password settings 54
setup wizard 53
encryption
settings 58
WEP key 44
enter text and symbols 18
envelopes
load 80
specifications 287
environment
Environmental product
stewardship program 289
error correction mode 139
error messages
memory cards 264
out of paper 268
reading or writing file 262
error reports, fax 151
European Union
Directive 2002/95/EC 290
recycling information 291
EWS. See Embedded Web
Server

F
factory defaults, restore 28
faded 199
fast copy quality 125
fax
answer call 140
answer mode 62
answer ring pattern 63
answering machine, set
up 242
auto answer 14, 62
backup fax reception 141
block numbers 145
broadcast 136
button 14
cancel 148
computer modem, set
up 242
contrast 138
coupler 242
darken or lighten 138
default settings 139
delete from memory 143
distinctive ringing 63
enter text and symbols 18
error correction mode 139
forward fax calls 143
header 64
Internet, over 147, 256

IP phone, using 147, 256
lighten or darken 138
log 151
menu 17
monitor dialing 134
not answering 238
paper checking 144
paper size 144
paper width incorrect 269
parallel splitter 242
pause 18
photos 136
poll to receive 143
poor quality printouts 190,
191, 199
problems receiving 199,
238
pulse or tone dial 29
receive 140
redial 29
reduction 145
reprint 142
resolution 137
rings to answer 62
schedule 135
send 131
set up 61
settings 29, 62, 137
specifications 288
speed 30
speed dial 65, 132
test setup 63
tone or pulse dial 29
troubleshoot 219
voice mail, set up 242
volume 26
fax problems
blank pages 199, 230
fax tones recorded 236
not printing 240
pages missing 228, 240
poor print quality 191, 199,
228
receiving 219, 230, 231,
235
sending 219, 225, 226, 230
slow transmission 230
smeared ink 190
static on phone line 248
text cut off 229, 241
troubleshoot 219
FCC statement 293

file
invalid name 263
supported formats 263
unreadable 262
unsupported formats 262
firmware revision mismatch 259
firmware version 54
fit to page 127
fit to page fails 217
FoIP 147, 256
forward
fax calls 143

G
gateway, default setting 55, 56
general information,
configuration page 54
glass
clean 155
load original 72
greeting cards, load 81
group speed dial entries 66

H
Hagaki, load 79
hardware address 56
hardware address (802.3
wired) 54
hardware test, fax 250
header, fax 64
help
menu 17
hostname 54, 60
HP Instant Share
send a scan 119
HP Photosmart
send images 107

I
images
crop 109
edit scanned 118
rotate 110
scan 115
send a scan 119
zoom 109
improper shutdown 271
index cards, load 79
individual speed dial entries 65
infrastructure mode 39
ink
drying time 268

empty 274
low 207
replace soon 277
sprays inside device 198
sprays inside HP All-inOne 207
ink cartridge
failure 274
ink cartridges
check ink levels 157
clean contacts 163
damaged 273
empty 274
error message 278
error messages 271
expired 274
HP ink depleted 275
incorrect 272, 273, 277, 278
missing 273
non-HP ink 275
order 167
replace 159
replace soon 277
supply error 275
tips 170
troubleshoot 177
ink levels
icons 14
ink levels, check 157
ink supplies
purchase 167
ink, removing ink from skin and
clothing 164
interface card 40
Internet, fax using 147, 256
invalid file name 263
IP
address 54, 55, 56
phone 147, 256
settings 51
iron-on transfers 96

J
jams, paper 82, 178
junk fax number 145

K
keypad 14, 18

303

Index

labels
load 81
specifications 287
landscape orientation 86
language, set 25
left arrow 13
legal paper
copy 122
load 76
specifications 287
letter paper
copy 123
load 76
specifications 287
lid backing, clean 157
light
copy 216
lighten
copies 125
faxes 138
line condition test, fax 254
link
configuration 55
speed 50
load
10 x 15 cm photo paper 78
4 x 6 inch photo paper 78
A4 paper 76
envelopes 80
full-size paper 76
greeting cards 81
Hagaki 79
index cards 79
iron-on transfers 81
labels 81
legal paper 76
letter paper 76
original 71
postcards 79
transparencies 81
log, fax 151

M
MAC address 54, 56
maintenance
align printer 161
check ink levels 157
clean exterior 157
clean glass 155
clean lid backing 157
clean print head 162
replace ink cartridges 159
304

restore factory defaults 28
self-test report 149
set FEMP mode 165
make a copy 121
manual
receive, fax 140
send, fax 133, 134
margins
incorrect 205
text or graphic cut off 206
maximum resolution quality 124
mDNS service name 54
media. See paper
Media Access Control (MAC)
address 54, 56
memory
delete faxes 143
reprint faxes 142
save faxes 141
memory cards
digital camera cannot
read 208
e-mail photos 107
error message 264
file unreadable 262
HP All-in-Onecannot
read 208
inaccessible 211
insert 108
photos missing 262
read or write error 211
save files to computer 108
scan to 117
share photos 107
slots 101
menus
copy 16
fax 17
help 17
scan to 17
setup 17
missing
information from copy 216
ink cartridge 273
text from scan 214
modem. See computer modem
monitor dialing 134

N
network
advanced settings 50
connection type 54
interface card 40

name 57
restore settings 49
security 44
status 54
upgrade 47
network configuration page 53
no scan options error 265
normal copy quality 125
number of copies 122

O
OK button 13
on button 14
order
ink cartridges 167
ink supplies 167
out of paper 268
overheads, print 96

P
page order 95
paper
choose 73
feed fails 198
incompatible types 75
jam 259, 268
jams 82, 171, 178
load 76
misfeed 268
out of 268
recommended copy
types 123
recommended sizes for
printing 84
recommended types 73, 74
size incorrect 269
size, set for fax 144
specifications 287
tips 171
type incorrect 269
type, check before
faxing 144
width incorrect 269
paper checking, fax 144
paper size
copy setting 122
paper type 85
passkey (Bluetooth) 59
password, Embedded Web
Server 54
PC modem. See computer
modem

Index
print
2 or 4 pages on 1 95
addresses 97
blank printout 207
booklet 93
borderless fails 201
borderless photos 90
both sides of page 93
cancel job 99
CD/DVD labels 92
correct order 95
distorted printout 193
envelopes 97
envelopes print
incorrectly 200
faded 195
fax reports 152
faxes 142
from computer 83
from software application 83
iron-on transfers 96
labels 97
margins incorrect 205, 206
meaningless characters 203
multiple pages on one
sheet 95
nothing happens 203
on photo paper 91
posters 98
preview 87
print options 84, 88
quality, troubleshoot 190,
191, 194, 196, 199, 228
reverse images 96
reversed page order 205
self-test report 149
special print jobs 90
specifications 288
transparencies 96
troubleshooting 200
vertical streaks 197
Web pages 98
print cartridges
low ink 207
print head
clean 162
failure 276
stalled 276
print head, blocked 178
print quality 86
print settings
brightness 87
color tone 87

layout 86
orientation 86
paper size 84
paper type 85
print quality 189
quality 86
reduce/enlarge 87
resizing options 87
resolution 86
saturation 87
speed 86
printer found screen,
Windows 47
printer sharing
Mac 36
Windows 36
printer, align 161
Printing Shortcuts tab 88
problems
copy 215
error messages 258
print 200
scan 212
pulse dial 29

Q
quality
print 86
quality, copy 124

R
radio, turn off 50
receive fax
auto answer mode 62
automatically 140
block numbers 145
forward calls 143
manually 140
polling 143
rings to answer 62
recycle
ink cartridges 290
red-eye, remove 109
redial fax 29
reduce fax 145
reduce/enlarge copies
custom size 127
resize to fit letter or A4 127
regulatory notices
Canadian statement 295
China 290

305

Index

peer-to-peer network 43
phone
receive fax 140
send fax 133
phone cord
check 252
connection, failure 252
phone line, answer ring
pattern 63
phone numbers, support 280
phone support 281
phone support period
period for support 281
photo
photosmart express
menu 16
Photo browsing 27
photo paper
copy 123
load 78
specifications 287
photos
add a frame 109
add color effect 109
adjust brightness 109
crop 109
e-mail 107
edit scanned 118
fax 136
flip horizontal 109
ink sprays 207
missing 262
print borderless 90
print on photo paper 91
remove red-eye 109
rotate 110
send using HP
Photosmart 107
share 107
zoom 109
Photosmart Express 13
poll to receive fax 143
poor fax printout quality 190,
191, 199
poor print quality
fax 228
portrait orientation 86
postcards
load 79
posters 98
preview copy 121
preview image, edit 118
preview print job 87

Index

declaration of conformity
(European Economic
Area) 299
declaration of conformity
(U.S.) 300
Directive 2002/95/EC 290
FCC part 68
requirements 294
FCC statement 293
geräuschemission 297
notice to users in Japan
(power cord) 297
notice to users in Japan
(VCCI) 297
notice to users in Korea 296
notice to users of the
German telephone
network 296
notice to users of the U.S.
telephone network 294
regulatory model
identification number 292
telecom notice to users in the
European Economic
Area 296
wireless statements 297
reinstall software 181
removing ink from skin and
clothing 164
replace ink cartridges 159
reports
caller ID 152
confirmation, fax 150
error, fax 151
fax log 151
junk fax numbers 152
last fax transaction 152
log, fax 151
self-test 149
speed dial list 152
reprint faxes in memory 142
resolution
print 86
resolution, fax 137
restore factory settings 28
restore network defaults 49
right arrow 13
rings to answer 62
RJ-45 plug 38, 60
rotate photos 110
router 38

306

S
saturation, change in print 87
save
faxes in memory 141
photos to computer 108
scanned image 117
scan
blank 213
button 14
cancel 119
crop incorrect 214
documents 115, 116
edit image 118
fails 213, 260
features 115
from control panel 117
halts 213
no scan options error 265
page layout incorrect 214
photos 115, 116
preview image, edit 118
save to computer 117
save to memory card 117
save to storage device 117
scan specifications 288
send using HP Photosmart
Share 119
share images 119
stop 119
text appears as dotted
lines 214
text format incorrect 214
text incorrect 214
to memory card 117
troubleshooting 212
scan glass
clean 155
load original 72
scan to
menu 17
schedule fax 135
security
Bluetooth 59
Bluetooth adapter 33
network, WEP key 40, 44,
45, 46, 57, 58
troubleshoot 44
self-test report 149
send fax
basic fax 131
broadcast 136
calling card, using 133, 134
color fax 136

credit card, using 133, 134
manually 133, 134
memory, from 135
monitor dialing 134
multiple recipients 136
schedule 135
speed dial 132
send images using HP
Photosmart Share
scanned image 119
set
print options 84, 88
settings
country/region 25
date and time 26
fax 29, 62, 137
language 25
network 48
restore defaults 49
setup
answering machine 242
button 14
computer modem 242
distinctive ringing 63
fax 61
menu 17
test fax 63
voice mail 242
sharing 47
shift left margin 128
ship your device 283
signal strength 57
sleep state 15
Smart Key 40
smeared ink, fax 190
software application, print
from 83
software installation
reinstall 181
troubleshoot 179
uninstall 181
sound, adjust volume 26
speed
copy 124
print 86
speed dial
create entries 65
delete entries 67
edit entries 66
group entries 66
individual entries 65
print list 67, 152

Index

T
T-shirt transfers. See iron-on
transfers
technical information
copy specifications 288
fax specifications 288
paper specifications 287
print specifications 288
scan specifications 288
system requirements 287
telephone
receive fax 140
send fax 133
telephone line, answer ring
pattern 63
telephone numbers,
support 280
telephone wall jack test, fax 251
test
dial tone 254
fax hardware 250
fax line condition 254
fax port 252
fax setup 63
phone cord 252
telephone wall jack 251

text
cut off 206, 229, 241
dotted lines on scan 214
enhance on copies 129
incorrect format on
scan 214
incorrect or missing on
scan 214
jagged 192
meaningless characters 203
not filled in 191
smooth fonts 192
text, enter 18
time 26
Tips Slideshow 28
tone dial 29
total packets
received 59
transmitted 59
total packets received (802.3
wired) 56
total packets transmitted (802.3
wired) 55
transparencies
copy 123
load 81
specifications 287
troubleshoot
blocked print head 178
fax problems 190, 191, 199,
219, 225, 226, 228, 229,
230, 231, 235, 236, 238,
240, 241, 248, 256
hardware installation 174
incorrect
measurements 177
jams, paper 82, 178
language, display 177
low signal 187
network connection 187
network setup 183
Passphrase, invalid 188
printer alignment 177
printer not found 189
software installation 179
USB cable 176
WEP key 188
wireless setup wizard 183,
186
troubleshooting
cannot find the file or
item 212

communication
problems 169
copy 215
error messages 258
file system 208
filename appears as
gibberish 211
others on network can
access my memory
card 212
print 200
Printer not Found 185
scan 212
unable to discover
device 183
two-sided prints 93

U
uninstall software 181
upgrade to network 47
URL 54
USB cable
communication lost 271
USB cable installation 176

V
visibility (Bluetooth) 59
voice mail, set up with fax 242
volume, adjust 26

W
wall jack test, fax 251
warranty 279, 281
Web pages, print 98
WEP key, setup 44
wireless
radio, turn off 50
setup wizard,
troubleshoot 183, 186
status 57
wireless regulatory notices
exposure to wireless
frequency radiation 297
notice to users in Brazil 297
notice to users in
Canada 298
notice to users in
Taiwan 299
notice to users in the
European Economic
Area 298
wireless router 38

307

Index

send fax 131, 132
set up 65
SSID
troubleshoot 186
wireless setting 57
start copy black 14
start copy color 14
start fax
black 14
color 14
status, network 54
stop
copy 129
fax 148
print job 99
scan 119
Store Demo 28
subnet mask 55, 56
subscriber identification
code 64
support
contact 280
support process 280
symbols, enter 18
system requirements 287

Z
zoom
button 13
buttons 109
photos 109

Index
308

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 309
Page Mode                       : UseOutlines
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e95011b1-d514-459b-9fd1-ee8346b2304b
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2007:01:29 13:34:19-08:00
Modify Date                     : 2007:05:18 11:23:10-07:00
Metadata Date                   : 2007:05:18 11:23:10-07:00
Creator Tool                    : XSL Formatter V3.4 MR5a (3,4,2006,0718) for Windows
Document ID                     : uuid:e081fbfd-8fde-40cb-a949-663f69ef3f15
Format                          : application/pdf
Creator                         : Hewlett-Packard
Description                     : 
Title                           : HP Photosmart C7200 All-in-One series
Author                          : Hewlett-Packard
Subject                         :

EXIF Metadata provided by EXIF.tools

Hp Photosmart C7250 All In One Printer Users Manual C7200 Series

Hp-Photosmart-C7200-Users-Manual-545288 hp-photosmart-c7200-users-manual-545288

If not then c01102249 Manual: ://h10032.www1.hp.com/ctg/Manual/c01102249

C7200 to the manual 3caf64e4-1832-4760-89e5-d1d80f0026e0

Navigation menu

Versions of this User Manual:

Views

Navigation