Hp Psc 2510 Photosmart All In One Printer Setup Poster Banzplusnetside1UK

HP PSC 2500 series All-in-One - (English) Windows/Mac Network Setup Poster bpu73591

: Hp Hp-Psc-2510-Photosmart-All-In-One-Printer-Setup-Poster-140997 hp-psc-2510-photosmart-all-in-one-printer-setup-poster-140997 hp pdf

Open the PDF directly: View PDF .
Page Count: 2

1-LINE

Network (Wired/Wireless) Setup Poster - Side 1

hp psc 2500 photosmart series all-in-one

Copyright Hewlett-Packard Company 2003 Printed in Germany.

Wired/Wireless Network

Start Here - CHOOSE CORRECT POSTER

Connect power cords

Insert print cartridges

Place the cover over

the top of the

HP PSC. Make sure

the buttons are

visible.

Firmly press down

on all sides of the

cover.

Remove tray and load plain white paper

Choose the one poster that Choose the one poster that

matches your equipment.matches your equipment.

If you have an existing

Windows or Macintosh

Windows or Macintosh

NetworkNetwork setup, follow this

poster.

If you do not have a network,

see the Direct Connect(USB)

poster.

Attach cover and lift display

Turn on and set language

and country/region

Connect the power

supply to the

HP PSC, and then to

the power cord.

Plug into the wall.

Choose Wired or Wireless setup*

Match the network type to your

existing network.

If you do not have an existing

network, set one up before

attempting to connect the

HP PSC.

Choose a or b, and then turn the

poster over.

Requirements:

Wired network c Wireless network (infrastructure)

Align the print cartridges

Wireless access point/

gateway/base station

Requirements:

123

4

You must connect one end of the

supplied phone cord to the phone jack

on the left (1-LINE) and the other end

to a wall jack.

To connect an answering machine or

use your own phone cord, see the

Fax Setup chapter in the

Reference Guide.

6

8

7

b

a

9

Connect supplied phone cord

5

Wireless Information:

WPA - If your wireless network uses WPA, configure this on the

HP PSC before you install the software. For details see the

Reference Guide, chapter 15, Wireless Network Setup,

use the embedded web server.

Compatibility with 802.11g - This HP PSC includes an 802.11b

radio that is compatible on 802.11g systems.

Remove all items

from the carton.

Remove all tape

and packaging

from the

HP PSC.

ETHERNET (CAT-5) cable

Windows/Macintosh

a

Q3093-90172

*Q3093-90172*

b

b

a

cLift display.

a b c d

a

Wired Network

Wireless Network

b

c

a

b

Turn power on.

Select your language, and then press

OK. Select your country/region, and

then press OK.

a

b

Press OK on the front panel to begin

alignment. Wait a couple of minutes.

After a page prints, alignment is

complete. Discard or recycle this

page.

*If you have a different network

setup, see the Reference Guide.

To set up with a USB cable, please

see the other poster for a direct

connection (install the software

before connecting the USB cable).

Hold the black print cartridge with the label on top as

shown. Slide the cartridge underneath the metal bar

into the right (gray latch) side of the print carriage.

Hold the color print cartridge with the label on top

as shown. Slide the cartridge into the left (blue

latch) side of the print carriage.

Make sure both latches are

locked into position. Close

the door.

Pull the end of the gray latch

toward you, press down until it

stops, and then release. Make

sure the latch catches below the

bottom tabs. Repeat with the

blue latch.

Remove the bright pink

tape from both the print

cartridges. Do not touch

the gold-colored contacts

or retape the cartridges.

Lift the print carriage door

up until it catches. Lift the

blue and gray latches.

ETHERNET (CAT-5) cable

abc

d

Router/hub/switch

Go to step 10a to set up with a wired network. Go to step 10b to set up with a wireless network.

BlackTri-Color

ef

*Q3093-90172*

hp psc 2500

photosmart series

all-in-one

reference guid e

hp psc 2500

photosmart series

all-in-one

reference guid e

Remove the yellow

plug from the

ETHERNET jack.

Connect the

ETHERNET cable to

the back of the

HP PSC.

Connect the

ETHERNET

cable to the

hub/router/

switch.

STOP! Make sure

the blue network

light on the HP PSC

is lit. This might take

60 seconds.

Connect the

ETHERNET

cable to the

access point.

(You will remove

this later.)

SSID

/Network Name:

WEP Key/Password

(if applicable):

For Macintosh, this is

called Network Name

and Password.

Remove the yellow

plug from the

ETHERNET jack.

Connect the

ETHERNET cable to

the back of the

HP PSC.

NOTE: You can use the

cable from the box or

purchase a longer cable.

Wired setup allows your

HP PSC to communicate to

your computers through a

router/hub/switch.

Wireless setup allows your

HP PSC to communicate to your

computers through a wireless

access point or base station.

Network Setup Poster - Side 2

10b

10a

Insert the HP PSC

Macintosh CD.

Double-click the HP

All-In-One Installer

icon on your folder.

Turn on your

computer and wait

for the desktop to

appear.

Make sure you are

logged onto the

network.

Disable any firewall

software.

If you have any questions,

see the Wired Network

Setup chapter in the

Reference Guide.

Follow these boxed steps for each computer that is part of the wired network.

Turn on your

computer and wait

for the desktop to

appear.

Make sure you are

logged onto the

network.

Disable any

firewall software.

If you have any questions,

see the Wireless

Network Setup chapter

in the Reference Guide.

Follow these boxed steps for each computer that is part of the wireless network.

Insert the HP PSC

Windows CD and

then, follow the

onscreen

instructions.

12 3

5

Choose wired

network as your

connection type.

Complete all onscreen

instructions including

the Setup Assistant.

In the Select Device

dialog box, make

sure TCP/IP

(network) is

selected.

Insert the HP PSC

Macintosh CD.

Double-click the

HP All-In-One

Installer icon on

your desktop.

Turn on your

computer and wait

for the desktop to

appear.

Make sure you are

logged onto the

network.

Disable any

firewall software.

Choose wireless

network as your

connection type.

Enter the

information that

you wrote down

earlier.

5

4

For the most up-to-date information on network setup, see www. hp.com/support

In the first dialog

box, you must select

Network as the

device connection

type.

Side 2 - Start on other side.

Wired network setup

Wireless network setup (infrastructure)

WINDOWS

USERS: Insert the HP PSC

Windows CD and

then, follow the

onscreen

instructions.

Choose Through the

network as your

connection type.

Choose the second

option, connect

using a network

cable as your

connection type.

Complete the rest of

the onscreen

instructions.

After your computer

restarts, follow all

onscreen instructions

including the Fax

Setup Wizard.

78 9

610 11

Congratulations!

You are ready

to use the HP PSC.

MACINTOSH

USERS: Congratulations!

You are ready

to use the

HP PSC.

ETHERNET

STOP! Make sure

the blue network

light on the

HP PSC is lit. This

might take 60

seconds.

Choose Through

the network as

your connection

type.

Choose connect

using wireless

communication

as your connection

type.

After your

computer restarts,

complete all

onscreen

instructions

including the Fax

Setup Wizard.

Complete the rest of

the onscreen

instructions. Enter the

information your

wrote down earlier.

Make sure the blue

network light is

steady. Refer to the

Reference Guide for

help.

When you see the

Unplug Cable

dialog box,

disconnect the

cable from your

HP PSC and

access point.

For the most up-to-date information on network setup, see www. hp.com/support

1234

Choose

Windows or

Macintosh,

and then follow

the steps carefully.

Choose

Windows or

Macintosh,

and then follow

the steps carefully.

In the box below,

write down the

information listed.

Use during step

10. If you are

unsure, see the

documentation or

web page for the

access point/base

station.

Congratulations!

You are ready

to use the HP PSC.

Congratulations!

You are ready

to use the HP PSC.

WINDOWS

USERS:

MACINTOSH

USERS:

Make sure the

blue network light

is steady. Refer to

the Reference

Guide for help.

ETHERNET 5 7 8 9

6610 11

10 11

78 9

610 11

789

6610 11

10 11

12

12

12

Complete all

onscreen

instructions

including the

Setup Assistant. In

the Select Device

dialog box, make

sure

TCP/IP

(network) is

selected.

In the first dialog

box, you must select

Network as the

device connection

type.

Turn on your

computer and wait

for the desktop to

appear.

Make sure you are

logged onto the

network.

Disable any

firewall software.