Hp Server Rp7420 Users Manual 9000 User Service Guide

2015-01-05

• HP 9000 rp7420 Server User Service Guide
• Table of Contents
• About This Document
  • Intended Audience
  • New and Changed Information in This Edition
  • Publishing History
  • Document Organization
  • Typographic Conventions
  • HP-UX Release Name and Release Identifier
  • Related Documents
  • HP Encourages Your Comments
• 1 Overview
  • Introduction
    • System Backplane
      • System Backplane to PCI-X Backplane Connectivity
      • Clocks and Reset
    • I/O Subsystem
  • Detailed HP 9000 rp7420 Server Description
    • Cell Board
      • PDH Riser Board
      • Central Processor Units
      • DIMMs
      • Main Memory Performance
      • Valid Memory Configurations
    • Cells and nPartitions
    • Internal Disk Devices for the HP 9000 rp7420 server
    • MP/SCSI MP Core I/O Board
    • Procurium LAN/SCSI Board
    • Mass Storage (Disk) Backplane
  • Server Description
    • Dimensions
    • System Chassis
• 2 Unpacking the Server
  • Unpacking a Racked Server
    • Securing the Cabinet
  • Unpacking a Non-Racked Server
    • Unloading With a Lifter
    • Unloading the Server With Lift Handle Panels
  • Installing the Server Into the Rack
• 3 Installing Accessories
  • Installing the Wheel Kit
    • Required Tools
  • PCI-X Card Cage Assembly I/O Cards
    • Installing PCI I/O Cards
      • Prerequisites for Adding a PCI I/O Card Using the Attention Button
• 4 Cabling and Powering the Server
  • AC Input Power
  • Checking the Voltage
  • Checking the Voltage (Additional Procedure)
  • MP Core I/O Connections
    • MP/SCSI Connections
    • LAN/SCSI Connections
    • Management Processor Access
    • Setting Up the Customer Engineer Tool (PC)
      • Setting CE Tool Parameters
      • Connecting the CE Tool to the Local RS-232 Port on the MP
    • Standby Power and Logging In to the MP
    • Configuring LAN Information For the MP
    • Accessing the MP Through a Web Browser
    • Verifying the Presence of the Cell Boards
  • Booting the HP 9000 rp7420 Server
    • Selecting a Boot Partition Using the MP
    • Verifying the System Configuration using Boot Console Handler
    • Booting HP-UX using Boot Console Handler
  • Adding Processors With Instant Capacity On Demand
  • Using the Checklist
• 5 Troubleshooting
  • Common Installation Problems
    • The Server Does Not Power On
    • The Server Powers On Then Shuts Off With a Fault Light
    • Cell Board Extraction Levers
  • LED Indicators
    • Front Panel LEDs
    • Bulk Power Supply LEDs
    • PCI Power Supply LEDs
    • System and PCI I/O Fan LEDs
    • OL* LEDs
    • PCI OL* Card Divider LEDs
    • Core I/O LEDs
    • Core I/O Buttons
    • PCI-X Hot-Plug LED OL* LEDs
    • Disk Drive LEDs
  • Server Management Subsystem Hardware Overview
  • Server Management Overview
  • Server Management Behavior
    • Thermal Monitoring
    • Fan Control
    • Power Control
  • Server Management Commands
• 6 Removing and Replacing Server Components
  • HP 9000 rp7420 Server Customer Replaceable Units
    • Hot-Pluggable CRUs
    • Hot-Swappable CRUs
    • Other CRUs
  • Safety and Environmental Considerations
    • Communications Interference
    • Electrostatic Discharge
  • Powering Off Hardware Components and Powering On the Server
    • Powering Off Hardware Components
    • Powering On the Server
  • Removing and Replacing the Top Cover
    • Removing the Top Cover
    • Replacing the Top Cover
  • Removing and Replacing a Side Cover
    • Removing a Side Cover
    • Replacing a Side Cover
  • Removing and Replacing a Disk Drive
    • Removing a Disk Drive
    • Replacing a Disk Drive
  • Removing and Replacing a CD/DVD/DAT Drive
    • Removing a CD/DVD/DAT Drive
    • Replacing a CD/DVD/DAT Drive
  • Removing and Replacing a Front Smart Fan Assembly
    • Removing a Front Smart Fan Assembly
    • Replacing a Front Smart Fan Assembly
  • Removing and Replacing a Rear Smart Fan Assembly
    • Removing a Rear Smart Fan Assembly
    • Replacing a Rear Smart Fan Assembly
  • Removing and Replacing a PCI-X Smart Fan Assembly
    • Removing a PCI-X Smart Fan Assembly
    • Replacing a PCI-X Smart Fan Assembly
  • Removing and Replacing a Bulk Power Supply
    • Removing a BPS
    • Replacing a BPS
  • Removing and Replacing a PCI Power Module
    • Preliminary Procedures
    • Removing a PCI Power Module
    • Replacing a PCI Power Module
  • Removing and Replacing a PCI Card
    • Removing the PCI Card
    • Replacing the PCI Card
  • Removing and Replacing the PCA Front Panel Board
    • Removing the PCA Front Panel Board
    • Replacing the Front Panel Board
• A Parts Information
• B System Specifications
  • Dimensions and Weights
  • Electrical Specifications
    • Grounding
    • AC-Powered Systems
      • Circuit Breaker
      • System AC Power Specifications
        • Power Cords
        • System Power Specifications
    • DC-Powered Systems
  • Environmental Specifications
    • Temperature and Humidity
      • Operating Environment
      • Environmental Temperature Sensor
      • Non-Operating Environment
    • Cooling
      • Cell Section Cooling
      • Bulk Power Supply Cooling
      • PCI/Mass Storage Section Cooling
      • Standby Cooling
    • Typical Power Dissipation and Cooling
    • Acoustic Noise Specification
    • Airflow
  • System Requirements Summary
    • Power Consumption and Air Conditioning
    • Weight
• C MP Commands
  • Server Management Commands
• D Site Preparation Guidelines
  • Equipment Footprint Templates
  • Computer Room Layout Plan
• Index