Hp Storageworks Msl6000 Series Users Manual Tape Library, August 2997

2015-02-09

• Contents
  • Related documentation
  • Document conventions and symbols
    • Table 1 Document conventions
  • HP technical support
    • HP-authorized reseller
    • Helpful web sites
• Introduction
  • Models
  • Accessories
  • Tape Drives
    • Figure 1 Library tape drive locations
    • Ultrium Tape Drives
      • Table 2 Ultrium Tape Drive Capacity and Data Transfer Rate
    • Ultrium Tape Cartridges
      • Figure 2 HP Ultrium 960 format trademark
    • SDLT Tape Drives
      • Table 3 SDLT Tape Drive Capacity and Data Transfer Rate
    • SDLT Tape Cartridges
  • Magazines
    • Figure 3 Library magazines
  • Power Supplies
    • Figure 4 Library power supplies
  • Robotics
    • Figure 5 Library robotics (top cover removed)
  • Library Controller Board
    • Figure 6 Library controller board
    • Figure 7 Library controller board connections
  • Factory-Defined Accessory PCI Slots
    • Figure 8 Library card cages
    • Embedded Network Storage Router (Optional)
  • Front Panel Indicators
    • Figure 9 Library front panel
  • Multi Unit Library Systems
    • Figure 10 Library PTM mounting location
• Installation
  • Converting a Tabletop Model to a Rackmount Model
    • Figure 11 Converting a tabletop model (four-drive model shown)
  • Setting Up the Rackmount Model
    • Figure 12 Library template (10000 rack enclosure shown)
    • Figure 13 Installing the rails
    • Figure 14 Installing the library (two-drive model shown)
    • Figure 15 Securing the library
  • Converting a Rackmount Model to a Tabletop Model
    • Figure 16 Converting a rackmount model (two-drive model shown)
  • Applying Power to the Library
    • Figure 17 Applying power to the library (four-drive rackmounted library shown)
  • Cabling for SCSI Configurations
    • Supported SCSI Cables
    • Two Tape Drives, Dual Host System
      • Figure 18 MSL6030/MSL6026 library SCSI cable configuration (two tape drives, dual host system)
    • Four Tape Drives, Dual Host System
      • Figure 19 MSL6060/MSL6052 library SCSI cable configuration (four tape drives, dual host system)
• Library Configuration
  • Changing Default Configuration Settings
  • Setting a SCSI ID
    • Figure 20 SCSI option selection screen (two-drive model shown)
    • Figure 21 Drive 0 bus ID screen
    • Figure 22 SCSI ID confirmation screen
    • Figure 23 Drive 0 bus ID data field screen (two-drive model shown)
  • Setting Up a Reserved Slot
    • Reserved Slot Numbering
      • Figure 24 Reserved slot locations, SDLT
      • Figure 25 Reserved slot locations, Ultrium (MSL6030)
      • Figure 26 Reserved slot locations, lower module, SDLT
      • Figure 27 Reserved slot locations, lower module, Ultrium (MSL6060)
      • Figure 28 Total reserved slots screen
      • Figure 29 Reserved slots numeric keypad screen
      • Figure 30 Total reserved slots confirmation screen
  • Configuring the Network Settings
    • Figure 31 IP address determination screen
    • Figure 32 User-specified IP address screen
    • Figure 33 Fixed IP address screen
• Operation
  • Front Panel
    • Figure 34 Library front panel
    • Magazine Doors
      • Figure 35 Magazine door mechanical releases (emergency access)
    • Indicators
      • Figure 36 Library indicators
      • Table 4 Library Status LED
    • Front Panel and Media Security Locks
      • GUI Touch Screen
        • Figure 37 Password levels
      • Host System
  • Library Display Screens and Options
    • Initialization Screen
      • Figure 38 Initialization screen
    • Library Status Screen
      • Figure 39 Library status screen (two-drive model shown)
      • Technical Support Information
        • Figure 40 Technical support information screen
      • Mail Slot Access (Left-hand Magazines Only)
        • Figure 41 Mail slot access screen (four-drive model shown)
      • Magazine Access
        • Figure 42 Magazine access screen (two-drive model shown)
      • Move Media
        • Figure 43 Move media screen (two-drive model shown)
      • GUI Contrast Controls
      • Power
        • Figure 44 Power-down confirmation message screen
      • Status
        • Figure 45 Status screen (four-drive model shown)
      • Cartridge Map
        • Figure 46 Cartridge map screen (two-drive model shown)
      • Online
      • Menu
        • Figure 47 Menu screen
  • Menu Selections
    • View System Data Area
      • Library Options
        • Figure 48 View library options screen
        • Table 5 View Library Options
      • SCSI Options
        • Figure 49 View SCSI options
        • Table 6 View SCSI Options
      • Network Options
        • Figure 50 Default view network options screen
        • Table 7 View Network Options
      • Library Info
        • Figure 51 View library info screen
    • Edit Options Area
      • Library
        • Figure 52 Edit library options screen
      • SCSI
        • Figure 53 Edit SCSI options screen
      • Network
        • Figure 54 Edit network options screen
      • Passwords
        • Figure 55 Edit passwords options screen
    • Utilities Area
      • Maintenance
        • Figure 56 Maintenance screen
      • Diagnostics
        • Figure 57 Diagnostics screen (four-drive model shown)
      • Factory
      • Security Level
        • Figure 58 Security level screen
  • Inserting and Removing Tape Cartridges
    • Removing Magazines
      • Figure 59 Removing tape cartridge magazines
    • Inserting Cartridges into a Magazine
      • Figure 60 Inserting a tape cartridge (left-hand magazine)
    • Using Mail Slots (Left-hand Magazines Only)
      • Figure 61 Left-hand magazine mail slot (two-drive model shown)
    • Labeling Tape Cartridges
      • Ultrium Labels
        • Figure 62 Attaching a bar code label to an Ultrium tape cartridge
        • Figure 63 Proper Ultrium bar code label placement
      • SDLT Labels
        • Figure 64 Attaching a bar code label to an SDLT tape cartridge
      • Media Label Identifiers
        • Table 8 Media Label Identifiers
• Remote Management Interface
  • Overview
  • Accessing the Remote Management Interface
    • Figure 65 Remote Management Interface login screen
    • Figure 66 Remote Management Interface main screen
    • Figure 67 Status screen
  • Using Menu Buttons
    • Status
    • Move Media
      • Figure 68 Move media screen
    • Setup
      • Figure 69 Setup screen
      • Library Configuration
        • Figure 70 Library configuration screen
      • SCSI Configuration
        • Figure 71 SCSI configuration screen
      • Drive Configuration
        • Figure 72 Drive configuration screen
    • Functions
      • Figure 73 Functions screen
    • History
      • Figure 74 History screen
  • Changing the Remote Management Interface Passwords
• Maintenance
  • Using the Library Maintenance Menu
    • Table 9 Maintenance Menu
  • Maintaining Tape Cartridges
    • Ultrium Cartridges
    • SDLT Cartridges
      • Figure 75 SDLT buckle leaders
  • Running a Cleaning Cartridge
    • Automatically Running a Cleaning Cartridge
    • Manually Running a Cleaning Cartridge
      • Running a Cleaning Cartridge from a Mail Slot
      • Running a Cleaning Cartridge from a Tape Cartridge Slot
      • Running a Cleaning Cartridge from a Cleaning Slot
  • Replacing a Cleaning Cartridge in a Reserved Slot
    • Replacing a Cleaning Cartridge in a Right Magazine
    • Replacing a Cleaning Cartridge in a Mail Slot
  • Updating Firmware
    • Checking the Firmware Revision
    • Using the Remote Management Interface
      • Figure 76 Updating firmware using the Remote Management Interface
      • Figure 77 Copying firmware using the Remote Management Interface
      • Figure 78 Confirming the Flash operation using the Remote Management Interface
    • Using HP StorageWorks Library & Tape Tools
    • Using a Serial Connection
      • Firmware Flashing Procedure
• Troubleshooting
  • Identifying Platform Problems
  • Performing Error Recovery
    • Figure 79 Troubleshooting flow chart
    • Fault Symptom Codes (FSCs)
      • Table 10 Fault Symptom Codes
  • Troubleshooting General Problems
    • Table 11 Troubleshooting General Problems
  • Using Diagnostic Support Tools
    • HP StorageWorks Library and Tape Tools
    • MSLUtil
  • Running Library Diagnostic Tests
    • Table 12 Library Diagnostic Tests
• Regulatory compliance notices
  • Regulatory compliance identification numbers
  • Federal Communications Commission notice
    • FCC rating label
      • Class A equipment
      • Class B equipment
    • Declaration of Conformity for products marked with the FCC logo, United States only.
    • Modification
    • Cables
  • Canadian notice (Avis Canadien)
    • Class A equipment
    • Class B equipment
  • European Union notice
  • Japanese notices
    • Japanese power cord statement
  • Korean notices
    • Class A equipment
    • Class B equipment
  • Taiwanese notices
    • BSMI Class A notice
    • Taiwan battery recycle statement
  • Laser compliance notices
    • Dutch laser notice
    • French laser notice
    • German laser notice
    • Italian laser notice
    • Japanese laser notice
    • Spanish laser notice
  • Recycling notices
    • Disposal of waste equipment by users in private household in the European Union
    • Danish notice
    • Dutch notice
    • Czecholslovakian notice
    • Estonian notice
    • Finnish notice
    • French notice
    • German notice
    • Greek notice
    • Hungarian notice
    • Italian notice
    • Latvian notice
    • Lithuanian notice
    • Polish notice
    • Portuguese notice
    • Slovakian notice
    • Slovenian notice
    • Spanish notice
    • Swedish notice
• Specifications
  • Power
    • Table 13 Power Specifications
  • Mechanical
    • Table 14 Rackmount Model Mechanical Specifications
  • Environmental (All Models)
    • Table 15 Operating Environmental Specifications
    • Table 16 Packed or Unpacked Environmental Specifications
    • Table 17 Transit -- Short Term Environmental Specifications
  • Acoustics
    • Table 18 Acoustic Noise Declared per ISO 9296 and ISO 7779
    • Table 19 Schallemissionswerte - Werteangaben nach ISO 9296 und ISO 7779/DIN 27779
  • Safety and Regulatory
    • Table 20 Regulatory and Product Safety Certifications
• Electrostatic Discharge
  • Grounding Methods
• Configuration Examples
  • SCSI Cable Configurations
    • Configuration Examples
      • Figure 80 MSL6030/MSL6026, 2 hosts/2 drives
      • Figure 81 Single MSL6060/MSL6052, 4 hosts/4 drives
• Optional Fibre Channel Card
  • Host Prerequisites
  • Connectors and Indicators
    • Figure 82 Connectors and indicators
    • Power Indicator
    • Serial Port
    • Ethernet Port
    • Fibre Channel Port
    • SCSI VHDCI Connectors
  • Configuration
    • Default Ethernet Settings
    • Configuration Examples
      • Figure 83 MSL6030/MSL6026 standalone
      • Figure 84 MSL6060/MSL6052 standalone
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W