Hsmartlink Technology I9812 WIFI CAMERA User Manual 9812 80x120mm

Download:
Mirror Download [FCC.gov]
Document ID	3303483
Application ID	8MamPjKF05K5h312tUr8GA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	150.2kB (1877523 bits)
Date Submitted	2017-03-03 00:00:00
Date Available	2017-03-03 00:00:00
Creation Date	2017-02-20 11:58:13
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-02-23 16:38:06
Document Title	9812-80x120mm说明书
Document Creator	CorelDRAW
Document Author:	Administrator

WIFI Camera
I9812
Easy User Manual
More information, please visit the online CD information
on the website
http://www.netcam360.com
Products Description
IR-CUT
CAMERA
LENS
MIC
SPEAKER
ANTENNA
LAN
POWER SUPPLY
RESET
SD CARD
Routine Use Way
1.Connected network camera
1).Network camera (IPC) connected to the power supply
2).Please wait after conection the power and IPC will check itself.
2.Install the client software
1). Make sure your phone connected to the Internet( WiFi/3G/4 )
2). Android version of the smartphone, scan two-dimensional code to
download and install the application as shown in picture (1) or login
www.netcam360.com download.
3). Apple users please scan two-dimensional code to download or enter
the Apple store search "netcam" to download and install software.
Picture (1)
Picture (2)
4) one key connecting devicemobile phone connect with WIFI; Open
App, click"add device",as shown in picture (3) click"one key connect
device"; enter the WIFI password, the mobile phone alignment
the mic of device, as shown in picture (4) click"start configuration"；
Picture (3)
Picture (4)
as shown in picture (5) Then you will hear the sound of"code
successed", as shown in picture (6) then click on the ID to confirm
add it, then the WIFI connecting.
Picture (5)
Picture (6)
3. Access to the network camera ID (Android system mobile client
as an example):
1). Running mobile application, click 2). Through the LAN and search the
ID number to conect.Picture (8)
on“Add device”. Picture (7)
Picture (7)
Picture (8)
3). To get the ID number via bar code scanning equipment. Scans the twodimensional in the base of the camera code label, complete the camera
added.Picture(9)
Picture (9)
4). By manually entering the network camera device ID, click Finish to
add the camera.Picture(10)
Picture (10)
4.Watch Videos(Supported browsers, PC client, mobile client, for
example the following figure to phone).
Mirror
Talkback Capture Recording
Peversal
Horizon
patrol
Vertical
patrol
RestorelR
Resolution Call/Set
Brightness Contrast
ON/OFF
Default
switching Perset
1). Web (IE browser): Search the Network Camera, Double-click
the IE browser into the network camera (IPC) video (for the first
time need to install the IE plug-in);
2). PC client: Install the PC client add devices(Add a device ID or IP
address)watch the IPC videos.
Remark:
The fist time user: PC client/Web browsers/Android
phones(Android tablet)/Apple(phone or tablet) you need to install
the corresponding software.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
To maintain compliance with FCC’s RF Exposure
guidelines, This equipment should be installed and
operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:02:20 11:58:13+08:00
Modify Date                     : 2017:02:23 16:38:06+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : 9812-80x120mm说明书
Creator Tool                    : CorelDRAW
Metadata Date                   : 2017:02:23 16:38:06+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:4efbc069-e73a-4acd-95c8-04412f9dd60b
Instance ID                     : uuid:c45c5512-1034-47af-a776-393a75a83380
Page Count                      : 7

EXIF Metadata provided by EXIF.tools