Hsmartlink Technology I9813 Wifi CAMERA User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	2578315
Application ID	lL29cZ/S6SEtgZVQc24veQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.17kB (439638 bits)
Date Submitted	2015-04-08 00:00:00
Date Available	2015-04-08 00:00:00
Creation Date	2015-03-25 11:20:10
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-03-30 18:06:16
Document Title	Microsoft Word - manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

IP Camera Simple Operation Manual
More information, please visit the online CD information on the website
http://www.netcam360.com
Routine Use Way
1.Connected network camera
1)Installing WiFi antenna. Tightening and antenna erected vertically,
as shown in picture(1).
2).Switched network camera (IPC) Power
3).Connected to the router. One cable plug into the router, another one
connected to the network camera port, Please wait after conection the
power IPC will check itself , about one minute.
2.Install the client software
1). Make sure your phone connect to the Internet（Wi-Fi/3G/4G）.
2). Android version of the smartphone, scan two-dimension code to
download and install the application as shown in picture (2) or login
www.netcam360.com download.
3). Apple users please enter the Apple store search "netcam" to
download and install software.
3. Access to the network camera ID (Android system mobile client as an example):
1). Running mobile application, click on the camera management.
2). Through the LAN and search the ID number to contact.
3). To get the ID number via bar code scanning equipment.
4). Scans the two-dimension code in the base of the camera code label, complete the camera added.
5). By manually entering the network camera device ID, click Finish to add the camera.
4. Watch Videos(Supported browsers, PC client, mobile client, for example the following figure to phone).
AP Way to See the Video Method
1.Connected network cameras
1). Installing Wi-Fi antenna. Tightening and antenna erected vertically, as shown in picture(1).
2).Switched network camera (IPC) Power.
2.Watch videos
3). AP Access: by scanning the bar code at the bottom of the machine or the LAN search, add AP
cameras, after successfully added in the video list to the right of the main menu and click Set button Wi-Fi
setup, the Wi-Fi connection is successful, that is to achieve the success of the camera and Wi-Fi LAN
connection.
After connecting the power of the network camera, it becomes AP hotspot. In "mobile wireless conection"
find the same name equipment as the SSID under the bottom of the camera, and enter the password to
complete access to the phone AP. Select "Scan Barcode" or "Search" to increase this camera.
Click on any of the liston the right side of the camera settings button. Set the connection Wi-Fi router, this
camera can be added to the Internet, You can watch anytime, anywhere via the Internet of this camera.
4). Web (IE browser): Search the Network Camera, Double-click the IE browser into the network camera
(IPC) video (for the first time need to install the IE plug-in);
5). PC client: Install the PC client add devices(Add a device ID or IP address)watch the IPC videos.
Remark:
The fist time user: PC client/Web browsers/Android phones(Android tablet)/Apple(phone or tablet) you
need to install the corresponding software.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2015:03:25 11:20:10+08:00
Modify Date                     : 2015:03:30 18:06:16+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:03:30 18:06:16+08:00
Format                          : application/pdf
Title                           : Microsoft Word - manual
Creator                         : Administrator
Document ID                     : uuid:16dc747c-633a-4ab2-b97e-1e517a3e168a
Instance ID                     : uuid:de578aeb-9660-4e8c-aa5f-d104235a5d5e
Page Count                      : 8

EXIF Metadata provided by EXIF.tools