Huawei Technologies 0000E612 UMTS/GSM/GPRS datacard User Manual Phone and Accessories
Huawei Technologies Co.,Ltd UMTS/GSM/GPRS datacard Phone and Accessories
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 574487 |
| Application ID | hIKj3VmIYgySBZTx2IphlA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 147.28kB (1840952 bits) |
| Date Submitted | 2005-08-24 00:00:00 |
| Date Available | 2005-08-24 00:00:00 |
| Creation Date | 2005-05-13 15:07:47 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-08-24 10:38:23 |
| Document Title | Phone and Accessories |
| Document Creator | Acrobat PDFMaker 6.0 Word 版 |
| Document Author: | hw |
Wonderful Communication, Mobile Life. Welcome to use E618/612 Data Card from Huawei Technologies Co., Ltd. HUAWEI E618/612 Data Card User Manual Copyright © 2005 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, expressed or implied. Safety Precautions Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, please see the section of “Warnings and Precautions”. Do not switch your wireless device on when the use of wireless devices is prohibited or when the wireless device may cause interference or danger. Do not use your wireless device while driving. Follow relevant rules or regulations in hospitals and health care facilities. Switch your wireless device off near medical devices. Switch your wireless device off in aircraft. The radio signal from it may cause interference to control signals of the aircraft. Switch your wireless device off near high-precision electronic devices. It may affect the performance of these devices. Do not attempt to disassemble your wireless device or its accessories. Only qualified personnel may service or repair the wireless device. Do not place your wireless device and its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your wireless device. Radiation from the wireless device may erase the information stored on them. Do not put your wireless device in a high-temperature place or use it in a place with flammable gas such as a gas station. Keep your wireless device and its accessories away from children. Do not allow children to use your wireless device without guidance. Observe any laws or regulations on the use of wireless device. Respect others’ privacy and legal rights when using your wireless device. Contents 1 Overview ............................................................................................................1 2 What’s in Your Packing Box...............................................................................3 3 Getting to Know Your E618/612 ........................................................................5 4 Getting Started....................................................................................................7 Computer Configuration Requirements........................................................7 Preparing the E618/612................................................................................7 5 Installation Guide ...............................................................................................9 Installing the E618/612 Manager .................................................................9 Installing the E618/612 Hardware Driver ..................................................10 Removing the E618/612.............................................................................10 Uninstalling the E618/612 Manager...........................................................11 6 Descriptions of the E618/612 Manager GUI ....................................................13 Accessing the E618/612 Manager GUI ......................................................13 Introduction to the Main Screen .................................................................14 7 Menu ................................................................................................................19 8 Internet Service ................................................................................................21 Network Connection Settings.....................................................................21 Accessing the Internet ................................................................................22 Volume Statistic..........................................................................................23 9 Call Service ......................................................................................................25 Make Calls .................................................................................................25 HUAWEI Contents Answering Calls.........................................................................................27 Volume Adjustment and Mute ....................................................................28 Shortcut Keys for Call Service...................................................................28 10 Messaging.......................................................................................................31 Sending and Receiving Text Messages.......................................................31 Text Message Import Management ............................................................40 SMS Settings..............................................................................................40 11 Managing Your Contacts ................................................................................43 Managing the Items in the Contacts ...........................................................43 Importing/Exporting Contacts....................................................................46 12 Call Register...................................................................................................49 Missed Calls...............................................................................................49 Received Calls............................................................................................51 Dialled Calls...............................................................................................52 13 Settings and Information Query......................................................................55 Choosing Network .....................................................................................55 Choosing Connection Type ........................................................................55 Band Selection ...........................................................................................55 Managing the PIN Code.............................................................................56 System Settings ..........................................................................................57 Diagnostics.................................................................................................60 14 Technical Parameters......................................................................................61 15 FAQ on E618/612 Data Card..........................................................................63 16 Warnings and Precautions...............................................................................65 Electronic Device .......................................................................................65 ii HUAWEI Contents Hospital ......................................................................................................65 Traffic Safety..............................................................................................65 Operating Environment ..............................................................................66 Emergency Call..........................................................................................66 Rules for Exposure to Radio Frequency Energy ........................................66 HUAWEI iii 1 Overview Welcome to use the HUAWEI E618/612 Data Card. With the E618/612, you can easily: Access the Internet Make and answer calls Send and receive text messages Use the function of contacts Use the function of call register service HUAWEI 2 What’s in Your Packing Box Your E618/612 packing box contains: An E618/612 data card An earphone A CD-ROM containing a PDF document of user manual and a setup program A quick start guide Note: The E618/612 provides you with an external antenna for your selection. For more information, please consult the dealers. HUAWEI 3 Getting to Know Your E618/612 The following is an illustration of your E618/612: External antenna interface Indicator Earphone jack Note: This is a schematic picture of an E618/612 profile; your E618/612 card may be different from this schematic picture. It is subject to your actual one. External Antenna Interface It is the interface of the external antenna of the E618/612 data card. Earphone Jack Please insert your earphone into the jack on the E618/612 when you have call service. HUAWEI 3 Getting to Know Your E618/612 Indicator This LED indicates the status of your E618/612. It is blue in WCDMA areas and green in GPRS/GSM areas. Indicator status Meaning Single-flash once in every two seconds The E618/612 is searching for a network, or no network is currently available. Double-flash once in every two seconds The network is normal. Quick flash A call is coming; or data transmission is doing in the case of data service. HUAWEI 4 Getting Started Computer Configuration Requirements To use the E618/612, the following are required for your computer: A type II PCMCIA Card slot, supporting CARDBUS A Pentium 100 processor or above 32MB RAM or above Windows XP or Windows 2000 operating system Display resolution of 800 x 600 pixels or above; that of 1024 x 768 pixels is recommended. Preparing the E618/612 1 Take out the E618/612 from the protective cover. 2 As shown in the following figure, place the USIM/SIM card into the slot on the back of the E618/612 card with its golden contact downwards and the blunt corner inwards, and make sure that the card is fully in place. HUAWEI 5 Installation Guide There are slight differences in the installation process between Windows XP, Windows 2000, and so on. During the actual installation, if any step differs from what is described here, please follow the specific installation instructions. Here, we will take the Windows XP operating system as an example. Note: Please make sure that the E618/612 Manager has been installed before the E618/612 card is inserted into the computer. Installing the E618/612 Manager 1 Put the E618/612 CD into the CD-ROM drive. 2 The setup program will start automatically, and the E618/612 installation screen will appear later. Note: If the auto-run program does not start, go to the drive path, find the Setup.exe file and double click on it, and then the program begins running. 3 The “Choose Language” dialog box appears. Select the needed installation language and click. 4 Follow the instructions of the program. 5 Once the installation is completed, the shortcut icon for the E618/612 Manager appears on the desktop. HUAWEI 5 Installation Guide Installing the E618/612 Hardware Driver 1 Insert the E618/612 containing the USIM/SIM card into the PCMCIA slot of your computer. 2 The system will find the new hardware and start the New Hardware Installation Wizard automatically. 3 If a prompt such as "The software failed to pass the Windows logo test" appears, click to continue. 4 When the system prompts you that the installation is finished, click to finish the installation of the E618/612 driver. Removing the E618/612 If you want to remove the E618/612 from the computer, please do it after having stopped it through the hardware removing function provided by Windows. When you want to remove the E618/612 from your computer, follow the procedure below: icon on the lower right of the screen of your 1 Double click on the computer, a dialog box of "Removed device safely" will appear. 2 Stop the use of the E618/612 hardware "NEC PCI to USB Open Host Controller". 3 When the system prompts you that it is safe to remove the device, pull out the E618/612. 10 HUAWEI 5 Installation Guide Uninstalling the E618/612 Manager You can uninstall the E618/612 Manager through the Add/Remove function of Windows. HUAWEI 11 6 Descriptions of the E618/612 Manager GUI Accessing the E618/612 Manager GUI 1 To start the program, double click the shortcut icon of the E618/612 Manager on the desktop. 2 If you are prompted to enter the PIN (Personal Identification Number) code, please enter a correct one and click . You can try three times to enter your PIN. If you failed to do that after three times, your USIM/SIM card would be locked. If this happens, use the PUK (PIN Unblocking Key) code to unlock it. You can try 10 times to enter your PUK code. If you failed to do that after 10 times, your USIM/SIM card would not operate. If this happens, please contact your operator. When you failed to enter the PIN code or the PUK code, you can click to cancel the operation of this validation. Then, the functions related to the USIM/SIM card such as connecting to the Internet, making and answering calls, sending and receiving text messages, and reading the messages recorded in the USIM/SIM card will be unavailable for you. However, you can still make emergency calls. The PIN code and the PUK code are provided by your network operator. For information about how to modify and enable/disable your PIN code, please refer to "Managing the PIN Code". HUAWEI 13 6 Descriptions of the E618/612 Manager GUI Introduction to the Main Screen Main Screen Overview The initial screen after the E618/612 manager starts is as follows: When you maximize the screen, it becomes the following: 14 HUAWEI 6 Descriptions of the E618/612 Manager GUI Shortcut Icons and Keys The list below describes the Shortcut icons and keys provided by the E618/612 Manager. Shortcut icon/key /F2 /F3 Description Connect/Disconnect the network. Start the default Internet browser in your operating system. Access the Call service screen. /F4 Access the SMS screen. /F5 Access the Contacts service screen. /F6 Access the Call Register service screen. /F7 F1 Access the online help. Status Information on the Screen The status information shown on the screen depends on the service that is going on. All the status information that may appear and their descriptions are listed below: When the screen is being initialized and in minimized status: Status information Description Signal strength Displays the current signal strength. The more the vertical bars, the stronger the signal is. Network Information about the current operator HUAWEI 15 6 Descriptions of the E618/612 Manager GUI Duration of this connection Displays the duration of the current data connection Volume of this connection Displays the volume of the current data connection When the screen is maximized: Status information Signal strength Network Connection Description Indicates the current network type and the signal strength. Information is described as below: y 3G: 3G network, in which both voice and data services can be used at present. y 3G CS: 3G network, in which only voice services can be used at present. y 3G PS: 3G network, in which only data services can be used at present. y GSM: 2G network, in which only voice services can be used at present. y GPRS: 2G network, in which both voice and data services can be used at present. Displays the information about the network operator. Missed calls Includes: y The duration of the current connection y The data volume of the current connection y The sent and the received volumes and rates of the current connection y The maximum sent and received rates of the current connection Displays the number of missed calls in real time New text messages Displays the number of new text messages in real time New text message reports Displays the number of new text message reports in real time 16 HUAWEI 6 Descriptions of the E618/612 Manager GUI HUAWEI 17 7 Menu File 1.1 Connect/Disconnect 1.2 Import Contacts 1.2.1 From File 1.2.2 From USIM/SIM Card 1.3 Export Contacts 1.3.1 To File 1.3.2 To USIM/SIM Card 1.4 Import Message from USIM/SIM Card 1.5 Exit 2 Tools 2.1 Open Browser 2.2 Call 2.3 SMS 2.4 Contacts 2.5 Call Register 2.6 Volume Statistic 2.7 Diagnostics Settings 3.1 Choose network HUAWEI 19 7 Menu 3.1.1 Auto 3.1.2 Manual 3.2 Choose connection type 3.2.1 GPRS Preferred 3.2.2 3G Preferred 3.2.3 GPRS Only 3.2.4 3G Only 3.3 Band Selection 3.3.1 All Band 3.3.2 GSM900/1800/WCDMA2100 3.3.3 GSM1900 3.4 Modify PIN code 3.5 PIN Code Protection 3.5.1 Validate 3.5.2 Activate 3.5.3 Disable 3.6 Options 3.7 SMS Settings 3.8 Network Connection Settings Help 4.1 Help Topics 4.2 HUAWEI Online Support 4.3 About 20 HUAWEI 8 Internet Service Network Connection Settings Create a Profile Select Settings Æ Network Connection Settings on the menu bar: Step Operation and description Click . Enter a new profile name in the "Profile name" field. Enter required information for the setting items of APN, IP, Authentification, DNS, WINS and Authentication protocol. Click to finish creating the new profile. Note: For the parameters required to be set and their values, contact your network operator. Deleting a Profile Select Settings Æ Network Connection Settings on the menu bar: Step Operation and description From the "Choose Profile Name" field, select a profile you want to delete. Click . To confirm the removing, click . HUAWEI 21 8 Internet Service Modifying a Profile Select Settings Æ Network Connection Settings on the menu bar: Step Operation and description From the "Choose Profile Name" field, select a profile you want to modify. Click . Make some changes. Click . Accessing the Internet You can access the Internet through establishing a 3G or GPRS connection: Step Operation and description Select Settings Æ Network Connection Settings, choose a profile you want, and click . Click on to establish a 3G or GPRS connection. After a prompt appears indicating that the connection is set up, Click on or start the Explorer on your machine, and then you can access the Internet. Click on to disconnect the connection. Once the connection is established, the following detailed information about the network connection is displayed on the main screen: Duration of the current connection Data volume of the current connection Received and sent volumes and rates of the current connection Maximum received and sent rates of the current connection 22 HUAWEI 8 Internet Service Note: E618/612 supports concurrent service of data service and voice service in 3G network. For more information, please ask for service provider. Volume Statistic You can view the content of the volume statistic. Select Tools Æ Volume Statistic on the menu bar: Last Volume Statistic: volume information for the last connection with the Internet, including sent and received volume statistic values and the duration of the connection. Total Volume Statistic: information about the total volume of all connections since the last reset operation you made, including sent and received volume statistic values and the duration of the connection. Last Reset Time: recording the time when you execute the reset operation for the last time. Click and you can clear the last volume statistic information and the total volume statistic information. Note: The above data of volume statistic is for your reference only. HUAWEI 23 9 Call Service When you request the call service, you need to insert the earphone to the jack on the E618/612. Note: You can use the control key on the earphone to answer or reject a coming call conveniently: when the ring for a coming call sounds, press the control key to answer the call, or press and hold the key to reject it. Make Calls The E618/612 provides many easy and quick ways to make calls. By Directly Entering a Telephone Number You may make a call by entering directly a telephone number: Step Operation and description Click on displayed. or select Tools Æ Call, the Call service screen is Enter a telephone number by one of the following ways: Enter the number directly with the keyboard of your computer. y Click the telephone keypads on the Call screen. Click on to make a call. Click on to end a call. HUAWEI 25 9 Call Service Note: You can remove the number on the call screen digit by digit by pressing the key. Pressing and holding it can remove the whole number. You can also press the backspace key of your computer to do this. By Selecting a Telephone Number from the Contacts List You may make a call by selecting a telephone number from the Contacts list: Step Operation and description Click on displayed. or select Tools Æ Call, the Call service screen is Click on , and the Contacts list is displayed. Double click a contact or select a contact and then click : y If the selected contact has only one number, the number will appear on the call screen and be dialed out directly. y If the contact has two or more numbers, double click on this intended number from the pop-up Select Phone Number window or click after selecting the number; and the selected number will appear on the call screen and be dialed out directly. Click on to end the call. By Selecting a Recently Dialed Number You may make a call by selecting one from the recently dialed numbers: Step Operation and description Click on displayed. 26 HUAWEI or select Tools Æ Call, the Call service screen is 9 Call Service Step Operation and description Click on to display a list of 10 recently dialed numbers. Double click the intended telephone number or click after selecting the number, then the number will be dialed out directly. Click on to end the call. Answering Calls The default alert mode of the E618/612 for incoming calls is by sound. You can select Settings Æ Options to set the mode: You can select the sound alert, and the display alert. For specific operations, refer to "System Settings". When you have any missed calls, the amount of your current missed calls is displayed in real time under the status information on the main screen. With the Setting of Sound Alert When there is an incoming call, you will hear a sound alert: Step Action Click on displayed. or select Tools Æ Call, the Call service screen is Click on to answer a call. Click on to end a call. With the Setting of Display Alert An alert window is displayed when a call comes. You can choose to: HUAWEI 27 9 Call Service Option Description Click Answer the call. Click Reject the call. Volume Adjustment and Mute Click on or select Tools Æ Call, the Call service screen is displayed. You can adjust the volume no matter when you are making a call or not. You can also mute your voice so that the person you are talking to cannot hear you even though the line is still active. To increase the volume, press To decrease the volume, press To mute your voice, press To resume normal talk, press Shortcut Keys for Call Service The following table shows the shortcut keys and their usage description: 28 HUAWEI 9 Call Service Shortcut keys Enter Description After entering a call number, press this key to make the call directly. Press this key to receive an incoming call. Ctrl+B The shortcut key for Ctrl+D The shortcut key for Ctrl+H The shortcut key for Ctrl+M The shortcut key for mute, by which you can switch between the mute and normal modes. Ctrl++/- The shortcut key for volume adjustment HUAWEI 29 10 Messaging Sending and Receiving Text Messages Writing New Text Messages or select Tools Æ SMS, the SMS screen is displayed: Click Step Operation and description Click on , the Write screen is displayed. Enter a telephone number by one of the following ways: Way 1: to select a number from the Contacts list: Click , select one contact and click , the number of this contact recorded on the Mobile column in the Contacts will be selected. y Way 2: to enter a number directly: In the blank field behind the "Contacts", enter numbers directly. y With the E618/612, you can send a message to several contacts in one time. To do so, if you adopt way 1, you can press key to select a sequence of contacts, or press to select them one by one; if you adopt way 2, you can use semicolons ";" as the separator between the numbers. Note: The E618/612 supports to send text messages in groups of up to 20 numbers. You can directly input the numbers or select them from the Contacts. HUAWEI 31 10 Messaging Step Operation and description Input the text message. The maximum length of each text message is 1000 characters. Click to send the message. After the message is sent out, it is saved automatically to the Outbox. If the sending fails, you will be prompted whether to send again. If you cancel the sending, the message will be saved automatically to the Outbox. Click to save the message to the Draft. Click to clear the contacts and the text message you just input. Note: When your text message contains no more than 160 characters, it will be sent as one message. If this number is exceeded, the message will be divided into several messages and sent one by one. When you use the SMS (Short Messaging Service), you can always operate in this way to go to the Write screen or select contacts. Inbox The Inbox contains the text messages you have received. It supports up to 1000 messages. When the Inbox is full and a new message is coming, the earliest message in the Inbox is removed automatically to the Trash. The amount of all the unread messages is displayed under the status information in the main screen in real time, if any such message exists. Go to the SMS window and click to open the Inbox. Going to the Inbox to View Your Text Messages 1 Go to the Inbox to View Your SMS Messages Directly You may go to the Inbox to browse and view your text messages: 32 HUAWEI 10 Messaging Step Operation and description Click on or select Tools Æ SMS, the SMS screen is displayed. Click on to go to the Inbox and browse; double click a message to view the detailed contents. There are two types of icons in the Inbox: : Standing for unread messages; : Standing for read messages. 2 View Text Messages When New Messages Come According to the settings you have made on Settings Æ Options, You can be alerted to a new text message in different ways. You can select Sound alert and Display alert; for specific operations, refer to "System Settings". y With sound alert being set: When a new message is coming, you can hear the sound alert: Step Operation and description Click on or select Tools Æ SMS, the SMS screen is displayed. Click on to go to the Inbox and check new messages; double click a message to view the detailed contents. y With display alert being set: When a new message is coming, you can see the alert window. Option Operation and description Click on the alert window The content of the message is displayed. Click on the alert window The content of the message is not displayed. HUAWEI 33 10 Messaging Replying Messages You can reply to the sender directly in the Inbox. Step Operation and description Select a text message or double click it to go to the screen with the detailed message and click . The telephone number of the original sender appears automatically in the blank field behind the "Contacts" and you can change it. Input the content for the message you want to reply. Click to reply. Forwarding Messages You can forward messages received in the Inbox. Step Operation and description Select a message or double click it to go to the screen with the detailed message and click . Input the telephone number you want to forward to, or click to select the number. The content of the message you want to forward appears automatically in the text box. You can edit or modify it. Click to forward the message. Making Calls You can playback the number of a message sender. Step 34 Operation and description Select a message or double click it to go to the screen with the detailed message and click . The call service screen is displayed, the number of the sender appears and it is dialed out automatically at the same time. HUAWEI 10 Messaging Deleting Messages You can remove the messages you have received. Step Operation and description Select one or more messages and click ; Double click a message to go to the screen with the detailed message and click . The messages are removed to the trash. Saving Numbers You can save the sender's numbers of the received messages to your contacts. Step Operation and description Select a message or double click it to go to the screen with the detailed message and click . The new contacts screen is displayed, and the sender number of this message appears automatically in the blank field behind Mobile Number. Input the information for this number as required. Click . Outbox The text messages you have sent out are saved in the Outbox. Up to 1000 messages can be stored in this box. When the Outbox is full and an additional message is coming, the earliest message in the Outbox will be moved to the trash automatically. Access the SMS screen, click and the Outbox is displayed. Viewing Text Messages in the Outbox You may go to the Outbox to check and view messages: HUAWEI 35 10 Messaging Step Operation and description You may browse all the messages in the Outbox. Double click a message to view the detailed contents. Sending Text Messages In the Outbox, you can send a new message to the receivers you have already sent a message to. Step Operation and description Select a message or double click it to go to the screen with the detailed message and click . You can also send messages in groups. To do so, select several messages and click . The telephone numbers of the receivers whom the message was sent to are displayed automatically in the blank column behind the "Contacts". You can change these numbers. Input the content for the new message. Click to send the new message. Forwarding Text Messages In the Outbox, you can forward the messages that have already been sent out. Step 36 Operation and description Select a message or double click it to go to the screen with the detailed message and click . Input the telephone number you want to forward to in the blank column behind the "Contacts", or Click to select the number you want. The content of the message you want to forward appears automatically in the text box. You can edit or modify it. Click to forward the message. HUAWEI 10 Messaging Making Calls In the Outbox, you can dial out a number of a receiver whom a message has been sent to. Step Operation and description Select a message or double click it to go to the screen with the detailed message and click . The call service screen is displayed, the number of the receiver whom this message was sent to appears on the screen and the number is dialed out automatically at the same time. Deleting Text Messages You can remove the messages from the Outbox. Step Operation and description Select one or more messages and click ; Double click a message to go to the screen with the detailed contents then click . The messages are removed to the trash. Saving Numbers You can save the receiver number of a message in the Outbox to your contacts. Step Operation and description Select a message or double click it to go to the screen with the detailed message and click . The new contacts screen is displayed, and the receiver number of this message appears automatically in the Mobile column. Input the information for this number as required. Click . HUAWEI 37 10 Messaging Draft The new messages that you wrote on the Write window, if having been saved, will have been stored in the Draft. Up to 1000 text messages can be stored in the Draft. When you save these messages, only the contents of them are saved in the Draft, the numbers you specified are not saved. Access the SMS screen, click and the Draft screen is displayed. Editing Text Messages You can edit a message in the Draft: Step Operation and description Select a message and click , or Double click on a message item. The Write screen is displayed, change the information and select , , or . Deleting Text Messages You can remove the messages in the Draft. Step Operation and description Select one or more messages and click . The messages are removed to the trash. Trash The messages you removed from the Inbox, Outbox and Draft are all stored in the Trash. Up to 1000 text messages can be stored in the Trash. When the trash is full and another message is removed to it, the earliest message in this box is removed automatically. Access the SMS screen, click and the trash screen is displayed. 38 HUAWEI 10 Messaging Restoring Text Messages You can restore text messages in the trash to their original boxes. Step Operation and description Select one or more messages and click . The messages are restored to the original boxes they stayed in before they were removed. Deleting Text Messages If you remove a message from the trash, it is permanently removed. Step Operation and description Select one or more messages and click . If you are sure to do this, click and the messages are removed permanently. Reports The Reports contains all the message reports you have received. Up to 1000 text message reports can be stored in the Reports. When this box is full and another report is coming in, the earliest report in this box is removed automatically. Access the SMS screen, click and the Reports box is displayed: Step Operation and description Select a message and click . If you are sure, click and this return notification SMS message is removed. HUAWEI 39 10 Messaging Text Message Import Management You can import messages from the USIM/SIM card to the E618/612: Step Operation and description Select File Æ Import Message from USIM/SIM Card. Messages in the USIM/SIM card are imported into their respective boxes in the E618/612, and the original messages in the card are all removed. Note: When the E618/612 Manager is started or the E618/612 is inserted, the program searches the USIM/SIM card for the unread message. If there is any, you are prompted to import the messages to the E618/612. If you agree, the unread messages will be imported to the E618/612 manager. SMS Settings Select Settings Æ SMS Settings, and the SMS settings screen is displayed: 40 HUAWEI 10 Messaging Option Description Request status report You can enable or disable this function. When the function is enabled and you are sending a message, the network will send a message to inform you that the receiver has got the message you have sent. Use same SMS centre for reply Set the SMS center number which receivers used to reply messages to the same one as the sender. SMS Bearer Domain The bearer field that is used to send messages: y Circuit Switched (CS): messages are sent through the CS domain. y Packet Switched (PS): messages are sent through the PS domain. Select the valid period during which messages can be stored in the SMS center. Validity SMC Number The number of the current SMS centre is supposed to be included in the USIM/SIM card; this information will automatically fill up as soon as the USIM/SIM card is loaded. If no such information or it has been accidentally deleted, contact your provider to get this number. Note: If no storage space is available in your USIM/SIM card for the reports, the "Request status report" option is invalid, please contact your card provider for details. HUAWEI 41 11 Managing Your Contacts The E618/612 supports up to 1000 items in the contacts. You can create, modify and delete items in the contacts. You can also send messages, make calls with the contacts. The E618/612 also supports the import/export of the contacts for your convenience to manage the contacts. Managing the Items in the Contacts Click , or select Tools Æ Contacts, and the contacts management screen is displayed. Creating New Items in the Contacts Procedure: Step Operation and description Click . Fill in the Name, Mobile Number, Family Phone Number, Office Phone number, E-mail addresses, and/or the Other information. Click to save a new item in the contacts. Modifying Items in the Contacts Procedure: HUAWEI 43 11 Managing Your Contacts Step Operation and description Select the item to be modified from the contacts, double click on this contact or click . Make some changes. Click . Removing Items from the Contacts Procedure Step Operation and description Select one or more items to be removed from the contacts, click . If sure, click . Sending Text Messages The E618/612 allows you to select numbers from the contacts and send messages. The procedure is as follows: Step 44 Operation and description Select one or more items from the contacts. Click , and then the E618/612 automatically picks up the numbers in the Mobile columns of the items you just select from the contacts, and the Write SMS screen is displayed. The mobile numbers retrieved appear in the blank column behind the "Contacts". Input the content for the message and click . HUAWEI 11 Managing Your Contacts Making Calls You can dial out the number you have selected from the contacts. The procedure is as follows: Step Operation and description Select the item that contains the number you want to dial from the contacts, click . If the item you have selected contains only one telephone number, the Call service screen will be displayed automatically. IF two or more telephone numbers are contained in the item you select, the Select Phone Number window is displayed and you are prompted to select one number. After doing that, click and the Call service screen is displayed. The number you have selected appears on the Call service screen automatically, and at the same time the number will be dialed out automatically. Searching for Items in the Contacts The E618/612 provides the function of searching for wanted items in the Contacts. Step Operation and description Click . Select a field item such as Name, Mobile, Family, Office or e-Mail from the pulldown list in the Condition area; Enter relevant searching terms in the Value text box; Choose Whole word only and/or Case sensitive for Matching Type. Click or to begin searching. HUAWEI 45 11 Managing Your Contacts Importing/Exporting Contacts Importing Contacts The E618/612 allows you to import the contacts items from the USIM/SIM card or a file in a specified format to the E618/612 contacts. Importing Items in Files of Specified Formats to the E618/612 Contacts The file formats that the E618/612 supports for importing are *.txt and *.csv. Step Operation and description Select File Æ Import Contacts Æ From File. From the Open window, select a file you want to import. Click , and the items in the file are imported to the E618/612 contacts automatically. Importing Contacts Items from the USIM/SIM Card to the E618/612 Contacts You can import the contacts items from the USIM/SIM card to the E618/612 contacts. The procedure is as follows: Step Operation and description Select File Æ Import Contacts Æ From USIM/SIM Card Choose one method: "Move Import": Original contacts items in the USIM/SIM card will be deleted. y "Copy Import": Original contacts items in the USIM/SIM card will remain unchanged. Click , and then select the columns in the contacts the item information will be imported to, such as Mobile, Family or Office, and select whether you want to proceed always in this way. Click to proceed. 46 HUAWEI 11 Managing Your Contacts Once the importing is completed, a prompt appears indicating the result. Exporting Contacts E618/612 allows you to export the items from the E618/612 contacts to the USIM/SIM card or a file. Exporting Contacts Items to a File The procedure is as follows: Step Operation and description Select File Æ Export Contacts Æ To File. If you are sure about this operation, select from the pop-up window. In the Save as window, input a file name with .csv as its extension. Click , and the items in the E618/612 contacts are exported to the specified file. Exporting Contacts Items to the USIM/SIM Card The procedure is as follows: Step Operation and description Select one or more items in the contacts. Note: If no contact information is selected, this function of export is unavailable. Select File Æ Export Contacts Æ To USIM/SIM Card. Once the exporting is completed, a prompt appears indicating the result. HUAWEI 47 11 Managing Your Contacts Note: The storage capacity of the USIM/SIM card for the contacts depends on the card itself. When you export the contacts to the USIM/SIM card, the E618/612 will interrupt the exporting process if the contacts you are exporting exceed the capacity of the USIM/SIM card. If this happens, however, the contents that have already been exported by the process will remain unchanged. 48 HUAWEI 12 Call Register The call register contains information about dialed, received and missed calls. Each kind of register supports up to 1000 items. Click or select Tools Æ Call Register, the Call Register screen is displayed. Missed Calls Click , and the Missed Calls screen is displayed. Sending Text Messages You can send messages to the numbers in the Missed calls items. Step Operation and description Select one or more items. Click , and then the E618/612 automatically retrieves the numbers in the items you select, and the Write SMS screen is displayed. The numbers retrieved automatically are displayed in the blank column behind the "Contacts". Input the content for the message and click . Making Calls You can dial out a number in a Missed calls item. HUAWEI 49 12 Call Register Step Operation and description Select an item. Click . The Call service screen is displayed, and the number you have selected appears automatically in the screen and at the same time the number will be dialed out automatically. Saving Numbers You can save numbers in the Missed calls items. Step Operation and description Select an item. Click . The New contacts screen is displayed. By default, the E618/612 will save the number of this selected item to the Mobile column in the contacts. You can change the number, if you think that this number is not the one you want to save to the Mobile column. Click . Removing Items You can remove items from the Missed calls. Step 50 Operation and description Select one or more items. Click . If you are sure, click . HUAWEI 12 Call Register Received Calls Click , and the Received calls screen is displayed. Sending Text Messages You can send messages to the numbers in the Received calls items. Step Operation and description Select one or more items. Click , and the E618/612 automatically retrieves the numbers in the items you select, and the Write SMS screen is displayed. The numbers retrieved automatically are displayed in the blank column behind the "Contacts". Input the content for the message and click . Making Calls You can dial out a number in a Received calls item. Step Operation and description Select an item. Click . The Call service screen is displayed, and the number you have selected appears automatically in the screen and, at the same time, the number will be dialed out automatically. Saving Numbers You can save numbers in the Received calls items. HUAWEI 51 12 Call Register Step Operation and description Select an item. Click . The New contacts screen is displayed. By default, the E618/612 will save the number of this item to the Mobile column in the contacts. You can change the number, if you think that this number is not the one you want to save to the Mobile column. Click . Removing Items You can remove items from the Received calls. Step Operation and description Select one or more items. Click . If you are sure, click . Dialled Calls Click , and the Dialled calls screen is displayed. Sending Text Messages You can send messages to the numbers in the Dialled calls items. 52 HUAWEI 12 Call Register Step Operation and description Select one or more items. Click , and the E618/612 automatically retrieves the numbers in the items you select, and the Write SMS screen is displayed. The numbers retrieved automatically are displayed in the blank column behind the "Contacts". Input the content for the message and click . Make Calls You can dial out a number in a Dialled calls item. Step Operation and description Select an item. Click . The Call service screen is displayed, and the number you have selected appears automatically in the screen and, at the same time, the number will be dialed out automatically. Saving Numbers You can save numbers in the Dialled calls items. HUAWEI 53 12 Call Register Step Operation and description Select an item. Click . The New contacts screen is displayed. By default, the E618/612 will save the number of this item to the Mobile column in the contacts. You can change the number, if you think that this number is not the one you want to save to the Mobile column. Click . Removing Items You can remove items from the Dialled calls. Step 54 Operation and description Select one or more items. Click . If you are sure, click . HUAWEI 13 Settings and Information Query Choosing Network You can manually search for a network or make the E618/612 search for a network automatically. Select Settings Æ Choose Network: Auto: The E618/612 automatically searches for a network and register itself to the network which it has found. Manual: You can make the search manually and select a network to register the E618/612. Choosing Connection Type Select Settings Æ Choose Connection Type on the menu bar: Option Description GPRS Preferred The E618/612 will choose GPRS in precedence if possible. 3G Preferred The E618/612 will choose 3G in precedence if possible. GPRS Only The E618/612 will choose GPRS only. 3G Only The E618/612 will choose 3G only. Band Selection You can set the working band for the E618/612. After setting, the E618/612 can HUAWEI 55 13 Settings and Information Query work only in the working band you have set. Enter Settings Æ Band Selection, and then you can select All Band, GSM900/1800/WCDMA2100 or GSM1900. Managing the PIN Code The PIN code is used to prevent your USIM/SIM card from the invalid use. Generally, the PIN code is provided along with your USIM/SIM card. You can change your PIN code, and you can also enable/disable the PIN feature. If you enable the feature, you must enter a PIN code when the E618/612 starts up. PIN Code Modification You can change your PIN code: Step Operation and description Select Settings Æ Modify PIN Code. Enter the current PIN code and the new PIN code, and then enter the new code again to confirm it. Click to modify it. PIN Code Validation After accessing the program of data card management, you can still use the function of validating the PIN code. Step 56 Operation and description Select Settings Æ PIN Code Protection. Selecting "Validate", you can access the PIN code validation flow which is the same as that when the E618/612 manager starts. For more information, please refer to the descriptions on page 13. HUAWEI 13 Settings and Information Query PIN Code Protection You can enable/disable the PIN function. If the function is enabled, you must enter a PIN code when the E618/612 starts up. Otherwise, you need not do this. Step Operation and description Select Settings Æ PIN Code Protection. Select "Enable" or "Disable". After that, you should enter the PIN code according to the prompt. y Enable: You must enter the PIN code when the E618/612 starts up. y Disable: You need not enter the PIN code when the E618/612 starts up. System Settings The system settings include the startup mode of the E618/612 manager, the alert mode for incoming calls, the alert mode for text messages, and the standby/hibernate mode for the computer, and so on. Select Settings Æ Options. Startup Settings Selecting the “Startup” tab, you can set the E618/612 manager to start along with the Windows, to be displayed in the minimized mode when it starts, or otherwise. HUAWEI 57 13 Settings and Information Query Option When the box is checked Launch data card on Windows start up The E618/612 manager starts along with the Windows. Start with the main window minimized The program is displayed in the minimized mode when it starts. When starting, check unread message When the program starts, it will check the unread messages in the USIM/SIM card and the data card. Note: Click on , and then this option restores its default value, namely, all options except "When starting, check unread message" are unchecked. Call Alerts Settings Selecting the “Prompts” tab, the options you can select for the coming call alerts are sound alert and display alert. Option Description Display alerts when a call coming Check the box, and an alert window is displayed when a call comes. You can: y Click to answer the call, or y Click to reject the call. y Click to select a sound file. y Click to hear the sound. Once a sound file is selected, it plays when a call comes. Sound Note: The alert sound files can be in *.wav or *.mid form. 58 HUAWEI 13 Settings and Information Query Message Alerts Settings Selecting the “Prompts” tab, the options you can select for the coming message alerts are sound alert and display alert. Option Description Display alerts when a message is received Check the box, and an alert window is displayed when a new message comes. You can: y Click to see the new message, or y Click to leave the message unseen. y Click to select a sound file. y Click to hear the sound. Once a sound file is selected, it plays when a new message comes. Play a sound when a message is received Note: The sound alert files can be in *.wav or *.mid form; If you click , all the items on the “Prompts” tab recover to the default values, that is, being checked. Standby/Hibernate Settings Enter the “Standby/Hibernate” tab, and then you have the following options: Option Description Prevent Standby or Hibernate and maintain connection To prevent the computer from standby or hibernate mode, and maintain the connection between the E618/612 and the network. Allow Standby or Hibernate and close connection To allow the computer to start the standby or hibernate mode, and disconnect the E618/612 and the network. HUAWEI 59 13 Settings and Information Query Note: If you click , the Standby/Hibernate status recovers to its default value, that is, allow standby or hibernate and close connection. Diagnostics E618/612 allows you to query information about the E618/612 and the USIM/SIM card. Select Tools Æ Diagnostics: Messages in USIM/SIM: This information is displayed in the format of "XX/YY", here XX is the number of the existing text messages, and YY is the capacity of the USIM/SIM card. Contacts in USIM/SIM: This information is displayed in the format of "XX/YY", here XX is the number of the existing contacts, and YY is the capacity of the USIM/SIM card. IMEI Number: the IMEI number of the E618/612. API Version: the version of the API. Firmware Version: the board software version of the E618/612. Hardware Version: the hardware version of the E618/612. 60 HUAWEI 14 Item Technical Parameters Description PC Card Type Type II, 68 Pin, CARDBUS Radio System GSM/GPRS: 900MHz/1800MHz/1900MHz; WCDMA: 2100MHz Radio Frequency band GSM/GPRS: 880MHz to 915MHz(Uplink); 925MHz to 960MHz (Downlink); GSM/GPRS: 1710MHz to 1785MHz (Uplink); 1805MHz to 1880MHz (Downlink); GSM/GPRS: 1850MHz to 1910MHz (Uplink); 1930MHz to 1990MHz (Downlink); WCDMA: 1920MHz to 1980 MHz (Uplink); 2110MHz to 2170MHz (Downlink) Radio power output GSM/GPRS 900M: Power class 4, 33dBm; GSM/GPRS 1800M. Power class 1, 30dBm; GSM/GPRS 1900M. Power class 1, 30dBm; WCDMA: Power class 3, 24dBm Services Voice: GSM, WCDMA; Data: GPRS Class 10, Type B; WCDMA: PS 384kbps/ Downlink, 128kbps/Uplink; SMS: GSM, GPRS, WCDMA; Concurrent: WCDMA support Voice and PS Data service concurrent; Size (D % W % H) 120 mm % 54 mm % 10 mm Weight Approx. 50g Battery Powered via the PC card slot, uses laptop battery HUAWEI 61 14 Technical Parameters Item Description Operating temperature -10oC to 55oC Storage temperature -20oC to 70oC 62 HUAWEI 15 FAQ on E618/612 Data Card How to Judge Whether the E618/612 Data Card has been Installed Correctly? After installing the E618/612 Data Card, two devices are displayed in the device manager, namely, the “HUAWEI Mobile Connect-3G Modem” and the “HUAWEI Mobile Conncet-3G Application Interface”. Check whether these two devices are installed correctly at first. If a yellow exclamatory mark or other signs appear in front of the devices, it means that the data card has not been installed correctly, and you need to retry. After Installing the E618/612 Management Software, the System Always Prompts “Data Card not Exit”. Why? Probably you have inserted the data card before the completion of installing the E618/612 management software. Pull out the data card and insert it after the installation of E618/612 management software is completed. Then, install the E618/612 hardware driver by following the guide for hardware installation. What Shall I Do if I cannot Access the Internet? 1 Check whether you have activated the wireless online service at first. You can ask the local network operator on how to activate it; 2 If you affirm that the wireless online service has been activated, refer to the section of “Internet Service” to implement relevant settings. Only Part of the Message is Displayed After I Use the “Paste” Function to Edit it. Why? While editing the message, at most 1000 characters are supported in the text. If the quantity of the pasted information exceeds the limitation, the exceeding part will be deleted automatically. When a Message is received, no Prompting Window Appears. Why? Because you have not set the function of “Display alerts when a message is HUAWEI 63 15 FAQ on E618/612 Data Card received”. Select Settings Æ Options, and then select the “Prompt” tab, and check the “Display alerts when a message is received” from the “Message alerts settings”. After the E618/612 Management Program is Started, the System Prompts “Import Message from USIM/SIM Card?” or the like. After Selecting “No”, I Still Want to Import the Message. What shall I Do? Select File Æ Import Message from USIM/SIM Card to import the message from the USIM/SIM Card to the PC. How to Dial the Telephone Numbers with “+” Sign? Double-click “*/+” on the telephone service interface, or input them through the PC keyboard. Why cannot I Paste the Telephone Numbers? Only such telephone numbers as “0123456789#*+” are legal. Confirm no other character is contained in the cut or pasted texts. 64 HUAWEI 16 Warnings and Precautions Electronic Device Switch your wireless device off near high-precision electronic devices. The phone may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer and confirm whether the radio wave affects the operation of this electronic device. Hospital Pay attention to the following points in hospitals or health care facilities: Do not take your wireless device into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). Switch your wireless device off near medial devices. Observe any instructions wherever the use of wireless devices is prohibited. Traffic Safety Do not use your wireless device while driving. Do not place the wireless device on the seat or other places where it can get moving in a sudden stop or collision. Observe the rules and regulations of airline companies. Switch your wireless device off before boarding an aircraft. HUAWEI 65 16 Warnings and Precautions Operating Environment Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless device. Radiation from the wireless device may erase the information stored on them. Do not put your wireless device in containers with strong magnetic field, such as the induction cooker and microwave oven. Otherwise, circuit failure may happen as a result. Do not leave your wireless device in a high-temperature place or use them in a place with flammable gas. Otherwise, malfunction of the product, fire, or explosion may happen as a result. The wireless device is not water-resistant. Keep it dry in use. Otherwise, malfunctions due to short-circuit or corrosion of the product may happen as a result. Do not subject your wireless device to serious collision or shock, or it may bring about malfunctions. Do not place the wireless device in the area over the air bag or in the air bag deployment area. Otherwise, the wireless device may hurt you owing to the strong force when the air bag inflates. Please try to avoid using this device under thunder storms in case you are exposed to lightening shock or other injuries. Put your wireless device in places beyond the reach of children. Do not allow children to use the wireless device without guidance. Do not touch the antenna when a call is going on. Touching the antenna may affect call quality and cause the wireless device to operate at a power level higher than needed. Emergency Call You can use your wireless device for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the wireless device for essential communications. Regulatory compliance 66 HUAWEI
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : 3.1-701 About : uuid:4e8d03ae-3d11-479d-a00a-59d5d02f9d77 Producer : Acrobat Distiller 6.0 (Windows) Company : Huawei Technologies Co., Ltd. Creator Tool : Acrobat PDFMaker 6.0 Word 版 Modify Date : 2005:08:24 10:38:23-07:00 Create Date : 2005:05:13 15:07:47+08:00 Metadata Date : 2005:08:24 10:38:23-07:00 Document ID : uuid:602df66c-121f-4b1f-8649-c6a40298ec5a Instance ID : uuid:0afa2813-b517-415e-8d7a-b3931e267982 Format : application/pdf Title : Phone and Accessories Creator : hw Has XFA : No Page Count : 76 Author : hwEXIF Metadata provided by EXIF.tools