Huawei Technologies AGS-L03 Huawei MediaPad T3 10 (MediaPad T3 10 for short) User Manual map
Huawei Technologies Co.,Ltd Huawei MediaPad T3 10 (MediaPad T3 10 for short) map
User Manual
Quick Start Guide 902257_01 Note: Remember the Google account your device last logged in to. During an untrusted factory settings restoration or microSD cardâbased update, Google's anti-theft mechanism requires you to enter the Google account your device last logged in to on the startup navigation screen for identity authentication. Your device can properly power on only after the identity authentication passes. Model: AGS-L03 Your device at a glance Before you start, let's take a look at your new device. ⢠To power on your device, press and hold the power button until the screen turns on. ⢠To power off your device, press and hold the power button, and then touch ,XUTZIGSKXG 9ZGZ[YOTJOIGZUX 3OIXUVNUTK 8KGXIGSKXG .KGJYKZPGIQ )GXJZXG_Legal information to view legal information for your product. Go to Settings and touch About tablet > Legal information > Safety information to view safety information for your product. Go to Settings and touch About tablet > Authentication info to view regulatory information for your product. Go to Settings and touch About tablet > Certification logos to view more information on certification logos for your product. All pictures and illustrations in this guide, including but not limited to the product color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety ⢠To prevent possible hearing damage, do not listen at high volume levels for long periods. ⢠Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. ⢠Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -40 °C to +70 °C. ⢠Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. ⢠Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. ⢠Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. ⢠While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. ⢠To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields. ⢠When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. ⢠Unplug the charger from electrical outlets and the device when not in use. ⢠Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. ⢠Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. FCC Regulatory Compliance Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using in portable exposure conditions is 1.36 W/kg. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. Legal Notice Trademarks and Permissions , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android⢠is a trademark of Google Inc. LTE is a trademark of ETSI. The BluetoothÂŽ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-FiÂŽ, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of WiFi Alliance. ENERGY STARÂŽ MARK For information related to ENERGY STARÂŽ, please visit the website www.energystar.gov. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy. Copyright Š Huawei Technologies Co., Ltd. 2017. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Language : en Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : FrameMaker 10.0.2 Modify Date : 2017:05:24 20:52:43+08:00 Create Date : 2017:05:23 20:28:33Z Metadata Date : 2017:05:24 20:52:43+08:00 Format : application/pdf Title : map Creator : n00192010 Producer : Acrobat Distiller 10.0.0 (Windows) Document ID : uuid:bccadd69-27fb-401e-91da-d8ef39296540 Instance ID : uuid:ebb30f31-37ef-4a3a-8c1d-6a72dc504032 Page Mode : UseOutlines Page Count : 9 For : Niexiaofen, Bounding Box : 2 -452 468 -51 Container Version : 11 Creator Version : 15 Author : n00192010EXIF Metadata provided by EXIF.tools