Huawei Technologies AP6050DN6150DN Wireless LAN Access Point User Manual Product Description
Huawei Technologies Co.,Ltd Wireless LAN Access Point Product Description
Contents
- 1. Users Manual
- 2. Users Manual_Hardware Installation and Maintenance Guide
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3226153 |
| Application ID | xOXwmBXok9ZD/6A4jfFHKA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.47kB (655856 bits) |
| Date Submitted | 2016-12-13 00:00:00 |
| Date Available | 2017-06-12 00:00:00 |
| Creation Date | 2016-11-18 19:09:39 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2016-11-18 19:09:39 |
| Document Title | Product Description |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | Huawei Technologies Co.,Ltd. |
AP6050DN&AP6150DN Product Description Issue 01 Date 2016-05-31 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://e.huawei.com Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description About This Document About This Document Intended Audience This document describes the positioning, characteristics, hardware structure, product features, and technical specifications of the AP. This document helps you understand the characteristics and features of the AP. This document is intended for: Network planning engineers Hardware installation engineers Commissioning engineer Data configuration engineers On-site maintenance engineers Network monitoring engineers System maintenance engineers Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii AP6050DN&AP6150DN Product Description About This Document Symbol Description related to personal injury. Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. Change History Changes between document issues are cumulative. The latest document issue contains all the changes made in previous issues. Changes in Issue 02 (2016-07-22) This version has the following updates: The following information is modified: 5.1 Basic Specifications 5.2 Radio Specifications Changes in Issue 01 (2016-05-31) This is the initial commercial release. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii AP6050DN&AP6150DN Product Description Contents Contents About This Document .................................................................................................................... ii 1 Product Positioning and Characteristics................................................................................... 1 1.1 Product Positioning ....................................................................................................................................................... 1 1.2 Product Characteristics ................................................................................................................................................. 6 2 Hardware Structure....................................................................................................................... 9 2.1 AP6050DN.................................................................................................................................................................... 9 2.2 AP6150DN.................................................................................................................................................................. 12 3 Product Features (in Fat AP and Fit AP Modes) .................................................................... 16 3.1 WLAN Features .......................................................................................................................................................... 16 3.2 Network Features ........................................................................................................................................................ 17 3.3 QoS Features............................................................................................................................................................... 17 3.4 Security Features ........................................................................................................................................................ 17 3.5 Maintenance Features ................................................................................................................................................. 18 3.6 BYOD ......................................................................................................................................................................... 18 3.7 Locating Service ......................................................................................................................................................... 19 3.8 Spectrum Analysis ...................................................................................................................................................... 19 4 Product Features (in Cloud-based Management Mode)...................................................... 20 5 Technical Specifications ............................................................................................................ 23 5.1 Basic Specifications .................................................................................................................................................... 23 5.2 Radio Specifications ................................................................................................................................................... 24 5.3 Standards Compliance ................................................................................................................................................ 30 Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iv AP6050DN&AP6150DN Product Description 1 Product Positioning and Characteristics Product Positioning and Characteristics 1.1 Product Positioning Table 1-1 Product positioning Product Model Frequency Band IEEE Standards Compliance Positioning Usage Scenario AP6050DN Dual band: AP6150DN 2.4 GHz 5 GHz IEEE 802.11a/b/g/n/a c/ac wave2 The AP6050DN and AP6150DN are the next-generation technology-lead ing APs. They support 4SU-3MU MU-MIMO and feature high reliability, high security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance. In compliance with IEEE 802.11ac, the AP6050DN and AP6150DN support a theoretical rate of up to 2.33 Gbit/s, greatly The AP6050DN and AP6150DN provide highest-quality wireless services for mobile office, high-density scenarios, elementary education, and higher education. They provide flexible distribution options in different environments. The AP6050DN and AP6150DN can provide services simultaneously on the 2.4 GHz and 5 GHz frequency bands to support more access users. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description Product Model 1 Product Positioning and Characteristics Frequency Band IEEE Standards Compliance Positioning Usage Scenario improving user experience. The AP6050DN and AP6150DN can work as a Fat AP, Fit AP, or cloud AP. The AP can switch flexibly among three working modes based on the network plan. Typical networking modes are as follows: Figure 1-1 Fit AP networking (AP mode) Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 1 Product Positioning and Characteristics In this networking, the AP functions as a Fit AP. The AC is responsible for user access, AP go-online, AP management, authentication, routing, security, and QoS. Huawei products that provide the AC function include the AC6605, AC6005, ACU2 (with S7700, S9700, or S12700), S5720HI, S7700 (with X series board), S9700 (with X series board), and S12700 (with X series board). Figure 1-2 Fit AP networking (WDS mode: point-to-point) Figure 1-3 Fit AP networking (WDS mode: point-to-multipoint) In this networking, the AP connects two or more independently wired or wireless LANs through wireless links to construct a network on which users can exchange data. In Wireless Distribution System (WDS) mode, the AP supports point-to-point (P2P) and point-to-multipoint (P2MP) networking modes. Supporting 5 GHz and 2.4 GHz frequency bands, the AP can implement wireless bridging and access functions. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 1 Product Positioning and Characteristics Figure 1-4 Fit AP mesh networking In this networking, APs function as mesh points (MPs) and are fully meshed to establish an auto-configured and self-healing wireless mesh network (WMN). APs with the gateway function can work as the mesh portal points (MPPs) through which the WMN can provide access to the Internet. Terminals connect to APs to access the WMN. The WMN uses dedicated mesh routing protocols to guarantee high transmission quality and is more applicable to scenarios that require high bandwidth and highly stable Internet connections. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 1 Product Positioning and Characteristics Figure 1-5 Fat AP networking In this networking, the device functions as a Fat AP to implement functions such as user access, authentication, data security, service forwarding, and QoS. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 1 Product Positioning and Characteristics Figure 1-6 Cloud AP networking In this networking, the device functions as a cloud AP and works with the Agile Controller-Cloud Manager on the same cloud for user access, AP online, authentication, routing, AP management, security, and QoS. An enterprise can choose to use the Portal authentication server integrated in the Agile Controller-Cloud Manager or the authentication server deployed by itself. 1.2 Product Characteristics Product Characteristics Description High-speed and reliable wireless access Compatibility with IEEE 802.11a/b/g/n/ac/ac wave 2. Supports 4SU-3MU MU-MIMO and a rate up to 2.33 Gbit/s. Supports a rate of up to 600 Mbit/s at 2.4 GHz frequency band. Supports a rate of up to 1.73 Gbit/s at 5 GHz frequency band. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 1 Product Positioning and Characteristics Product Characteristics Comprehensive user access control capability High network security Flexible networking and environment adaptability Issue 01 (2016-05-31) Description Supports link aggregation of dual Ethernet ports. Supports Wi-Fi Multimedia (WMM) and priority mapping on the air interface and wired interface. Supports wired link integrity check. Supports load balancing. Supports roaming without service interruption in Fit AP mode. Supports AC dual-link backup in Fit AP mode. Supports beamforming. Provides a latest 802.11ac Wave 2 chip with higher performance and wider coverage. Uses a metal shell and heat dissipation design to ensure high reliability. Supports access control lists (ACLs) and implements user access control based on the user group policy. Provides fine-grained bandwidth management for each user. Supports user isolation policies. Supports unified authentication on the AC in Fit AP mode. Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address, user agent (UA) information in an HTTP packet, and DHCP options in Fit AP mode. The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets in Fit AP mode. Open system authentication WEP authentication/encryption WPA/WPA2-PSK authentication and encryption WPA/WPA2-802.1x authentication and encryption Wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS), including rogue device detection and countermeasure, attack detection and dynamic blacklist, and STA/AP blacklist and whitelist Provides flexible networking capabilities and applies to various application scenarios. Has strong environment adaptability. The AP can automatically select the transmission rates, channels, and transmit power to adapt to various radio environments and avoid interference in real time. Adjusts bandwidth allocation based on the user quantity and environment to improve user experience. The AP6050DN supports the MIMO antenna system equipped with built-in dual-band omnidirectional antennas. The AP6150DN supports the MIMO antenna system equipped with external dual-band omnidirectional antennas. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 1 Product Positioning and Characteristics Product Characteristics Easy device management and maintenance Issue 01 (2016-05-31) Description Works in Fit AP mode to identify interference sources such as baby monitors, Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz frequency bands), wireless game controllers, and microwaves, and works together with eSight to locate interference sources and display spectrums. Works in Fit AP mode to support automatic going-online, configuration loading, and plug-and-play (PnP). Supports batch upgrade. Works in Fat AP mode to support HTTP or HTTPS login to the web platform to achieve local management and maintenance. Allows real-time monitoring on the network management system (NMS) to facilitate remote configuration and fast fault location. Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 2 Hardware Structure Hardware Structure 2.1 AP6050DN Appearance Figure 2-1 shows the appearance of the AP. The actual device appearance may be different from the following device appearance, but these differences will not affect device functions. Figure 2-1 AP6050DN appearance Port The following figure shows ports on the AP6050DN. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP6050DN&AP6150DN Product Description 2 Hardware Structure Figure 2-2 AP6050DN ports As shown in Figure 2-2, each port can be described as follows: 1. Default button: restores factory settings if you hold down the button more than 3 seconds. 2. USB port: connects to a USB flash drive to extend the storage space of the AP, and provides a maximum of 2.5 W power. 3. Console port: connects to the maintenance terminal for AP configuration and management. 4. Ground screw: connects the AP to a ground cable. 5. GE1: 10/100/1000M port used to connect to the wired Ethernet. 6. GE0/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can connect to a PoE power supply to provide power for APs. 7. Input port for 12 V DC power supply. 8. Lock port: protects the AP against theft. LED Indicators Indicator colors may vary slightly at different temperature. Type Color Status Description Default status after power-on Green Steady on The AP is just powered on and the software is not started yet. Software startup status Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 10 AP6050DN&AP6150DN Product Description 2 Hardware Structure Type Color Status Description green once. Until the software is uploaded and started, the indicator remains steady green. Running status Alarm Issue 01 (2016-05-31) Green Green Blinking once every 2s (0.5 Hz) The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP. The system enters the Uboot CLI. Blinking once every 5s (0.2 Hz) The system is running properly, the Ethernet connection is normal, and no STA is associated with the AP. The system is in low power consumption state. Blinking once every 0.25s (4 Hz) The software is being upgraded. After the software is loaded and started, the AP requests to go online if it works in Fit AP or cloud-based management mode. The indicator remains in this state before the AP successfully goes online (CAPWAP link setup). The AP works in Fit AP or cloud-based management mode and fails to go online Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 11 AP6050DN&AP6150DN Product Description Type 2 Hardware Structure Color Status Description (CAPWAP link disconnection). Fault Red Steady on A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually. 2.2 AP6150DN Appearance Figure 2-3 shows the appearance of the AP. The actual device appearance may be different from the following device appearance, but these differences will not affect device functions. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 12 AP6050DN&AP6150DN Product Description 2 Hardware Structure Figure 2-3 AP6150DN appearance Port The following figure shows ports on the AP6150DN. Figure 2-4 AP6150DN ports Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 13 AP6050DN&AP6150DN Product Description 2 Hardware Structure As shown in Figure 2-4, each port can be described as follows: 1. Default button: restores factory settings if you hold down the button more than 3 seconds. 2. USB port: connects to a USB flash drive to extend the storage space of the AP, and provides a maximum of 2.5 W power. 3. Console port: connects to the maintenance terminal for AP configuration and management. 4. Ground screw: connects the AP to a ground cable. 5. GE1: 10/100/1000M port used to connect to the wired Ethernet. 6. GE0/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can connect to a PoE power supply to provide power for APs. 7. Input port for 12 V DC power supply. 8. Lock port: protects the AP against theft. 9. Antenna port: connects to an external antenna for transmitting and receiving service signals. LED Indicators Indicator colors may vary slightly at different temperature. Type Color Status Description Default status after power-on Green Steady on The AP is just powered on and the software is not started yet. Software startup status Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started, the indicator remains steady green. Running status Green Blinking once every 2s (0.5 Hz) The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP. The system enters the Uboot CLI. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 14 AP6050DN&AP6150DN Product Description Type Alarm Fault Issue 01 (2016-05-31) 2 Hardware Structure Color Green Status Description Blinking once every 5s (0.2 Hz) The system is running properly, the Ethernet connection is normal, and no STA is associated with the AP. The system is in low power consumption state. Blinking once every 0.25s (4 Hz) The software is being upgraded. After the software is loaded and started, the AP requests to go online if it works in Fit AP or cloud-based management mode. The indicator remains in this state before the AP successfully goes online (CAPWAP link setup). The AP works in Fit AP or cloud-based management mode and fails to go online (CAPWAP link disconnection). Steady on A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 15 Red AP6050DN&AP6150DN Product Description 3 Product Features (in Fat AP and Fit AP Modes) Product Features (in Fat AP and Fit AP Modes) 3.1 WLAN Features WLAN features supported by the AP are as follows: Compliance with IEEE 802.11a/b/g/n/ac/ac Wave 2 Maximum rate of 2.33 Gbit/s Maximum ratio combining (MRC) Space time block code (STBC) Beamforming MU-MIMO Low-density parity-check (LDPC) Maximum-likelihood detection (MLD) Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) Short guard interval (GI) in 20 MHz, 40 MHz, 80 MHz, 160 MHz, and 80+80 MHz modes Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding Automatic and manual rate adjustment WLAN channel management and channel rate adjustment For details about WLAN channel management, see the Country Code & Channel Compliance Table. Automatic channel scanning and interference avoidance Service set identifier (SSID) hiding Signal sustain technology (SST) Unscheduled automatic power save delivery (U-APSD) Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode Automatic login in Fit AP mode Extended Service Set (ESS) in Fit AP mode Wireless distribution system (WDS) in Fit AP mode Mesh networking in Fit AP mode Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 16 AP6050DN&AP6150DN Product Description 3 Product Features (in Fat AP and Fit AP Modes) Multi-user CAC 3.2 Network Features Network features supported by the AP are as follows: Compliance with IEEE 802.3u Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) Compliance with IEEE 802.1q SSID-based VLAN assignment VLAN trunk on uplink Ethernet ports Management channel of the AP uplink port in tagged and untagged mode DHCP client, obtaining IP addresses through DHCP Tunnel data forwarding and direct data forwarding STA isolation in the same VLAN Access control lists (ACLs) Link Layer Discovery Protocol (LLDP) Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode Unified authentication on the AC in Fit AP mode AC dual-link backup in Fit AP mode Network Address Translation (NAT) in Fat AP mode IPv6 in Fit AP mode 3.3 QoS Features QoS features supported by the AP are as follows: Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding WMM parameter management for each radio WMM power saving Priority mapping for upstream packets and flow-based mapping for downstream packets Queue mapping and scheduling User-based bandwidth limiting Adaptive bandwidth management (automatic bandwidth adjustment based on the user quantity and radio environment) to improve user experience 3.4 Security Features Security features supported by the AP are as follows: Issue 01 (2016-05-31) Open system authentication Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 17 AP6050DN&AP6150DN Product Description 3 Product Features (in Fat AP and Fit AP Modes) WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key WPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition) WPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition) WPA-WPA2 hybrid authentication WAPI authentication and encryption Wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS), including rogue device detection and countermeasure, attack detection and dynamic blacklist, and STA/AP blacklist and whitelist 802.1x authentication, MAC address authentication, and Portal authentication DHCP snooping Dynamic ARP Inspection (DAI) IP Source Guard (IPSG) 3.5 Maintenance Features Maintenance features supported by the AP are as follows: Unified management and maintenance on the AC in Fit AP mode Automatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode WDS zero-configuration deployment in Fit AP mode Mesh network zero-configuration deployment in Fit AP mode Batch upgrade in Fit AP mode Telnet STelnet using SSH v2 SFTP using SSH v2 Local AP management through the serial interface Web local AP management through HTTP or HTTPS in Fat AP mode Real-time configuration monitoring and fast fault location using the NMS SNMP v1/v2/v3 in Fat AP mode System status alarm Network Time Protocol (NTP) in Fat AP mode 3.6 BYOD The AP supports bring your own device (BYOD) only in Fit AP mode. BYOD features supported by the AP are as follows: Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address. Identifies the device type according to the user agent (UA) information in an HTTP packet. Identifies the device type according to DHCP options. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 18 AP6050DN&AP6150DN Product Description 3 Product Features (in Fat AP and Fit AP Modes) The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets. 3.7 Locating Service The AP supports the locating service only in Fit AP mode. Locating service features supported by the AP are as follows: Locates tags manufactured by AeroScout or Ekahau. Locates Wi-Fi terminals. Works with eSight to locate rogue devices. 3.8 Spectrum Analysis The AP supports spectrum analysis only in Fit AP mode. Spectrum analysis features supported by the AP are as follows: Identifies interference sources such as baby monitors, Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz frequency bands), wireless game controllers, and microwaves. Works with eSight to perform spectrum analysis on interference sources. Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 19 AP6050DN&AP6150DN Product Description 4 Product Features (in Cloud-based Management Mode) Product Features (in Cloud-based Management Mode) The following table lists features supported by APs in cloud-based management mode. Features Description WLAN Features Compliance with IEEE 802.11a/b/g/n/ac/ac Wave 2 Maximum rate of 2.33 Gbit/s Maximum ratio combining (MRC) Space time block code (STBC) Beamforming Low-density parity-check (LDPC) Maximum-likelihood detection (MLD) Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding WLAN channel management and channel rate adjustment NOTE For details about WLAN channel management, see the Country Code & Channel Compliance Table. Network Features Issue 01 (2016-05-31) Service set identifier (SSID) hiding Signal sustain technology (SST) Unscheduled automatic power save delivery (U-APSD) Automatic login Compliance with IEEE 802.3u Auto-negotiation of the rate and duplex mode and automatic switchover between Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 20 AP6050DN&AP6150DN Product Description 4 Product Features (in Cloud-based Management Mode) Features Description the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) QoS Features Security Features Maintenance Features Issue 01 (2016-05-31) Compliance with IEEE 802.1q SSID-based VLAN assignment DHCP client, obtaining IP addresses through DHCP STA isolation in the same VLAN Access control lists (ACLs) Unified authentication on the Agile Controller Network Address Translation (NAT) Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding WMM parameter management for each radio WMM power saving Priority mapping for upstream packets and flow-based mapping for downstream packets Queue mapping and scheduling User-based bandwidth limiting Airtime scheduling Open system authentication WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key WPA2-PSK authentication and encryption (WPA2 personal edition) WPA2-802.1x authentication and encryption (WPA2 enterprise edition) 802.1x authentication, MAC address authentication, and Portal authentication DHCP snooping Dynamic ARP Inspection (DAI) IP Source Guard (IPSG) Unified management and maintenance on the Agile Controller Automatic login and configuration loading, and plug-and-play (PnP) Batch upgrade Telnet Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 21 AP6050DN&AP6150DN Product Description Features Issue 01 (2016-05-31) 4 Product Features (in Cloud-based Management Mode) Description STelnet using SSH v2 SFTP using SSH v2 Local AP management through the serial interface Web local AP management through HTTP or HTTPS Real-time configuration monitoring and fast fault location using the NMS System status alarm Network Time Protocol (NTP) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 22 AP6050DN&AP6150DN Product Description 5 Technical Specifications Technical Specifications 5.1 Basic Specifications Table 5-1 Basic specifications Item Technical specifications Description Dimensions (H x W x D) 53 mm x 220 mm x 220 mm Weight AP6050DN: 1.20 kg AP6150DN: 1.29 kg 512 MB DDR3L 4 MB NOR FLASH + 128 MB NAND FLASH DC: 12 V ±10% PoE power supply: in compliance with IEEE 802.3at System memory Power specifications Environment specifications Issue 01 (2016-05-31) Power input Maximum power consumption 22.9 W(excluding the output power of the USB port) Operating temperature -60 m to +1800 m: -10°C to +50°C 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m. Storage temperature -40°C to +70°C Operating humidity 5% to 95% (non-condensing) IP rating IP41 Atmospheric pressure 53 kPa to 106 kPa NOTE The actual maximum power consumption depends on local laws and regulations. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 23 AP6050DN&AP6150DN Product Description 5 Technical Specifications 5.2 Radio Specifications Table 5-2 Radio specifications Item Description Antenna type AP6050DN: built-in omnidirectional dual-band antenna Antenna gain AP6050DN: AP6150DN: external omnidirectional dual-band antenna 2.4 GHz: 6 dBi/Typical，6.53dBi/Peak 5 GHz: 6 dBi/Typical, 6.58dBi/Peak AP6150DN: 2.4 GHz: 3.5 dBi/Typical, 3.87dBi/Peak 5 GHz: 4 dBi/Typical, 4.82dBi/Peak Maximum number of concurrent users ≤512 Maximum number of VAPs for each radio 16 Maximum transmit power 2.4 GHz: 26 dBm (combined power) 5 GHz: 25 dBm (combined power) NOTE The actual transmit power depends on local laws and regulations. You can adjust the transmit power from the maximum transmit power to 1 dBm, with a step of 1 dB. Maximum number of non-overlap ping channels 2.4 GHz 5 GHz 802.11b/g − 20 MHz: 802.11n − 20 MHz: 13 802.11n − 20 MHz: − 20 MHz: 13 − 40 MHz: − 40 MHz: Issue 01 (2016-05-31) 802.11a 802.11ac − 20 MHz: 13 − 40 MHz: − 80 MHz: − 160 MHz: NOTE The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance. NOTICE If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage. 1. The country code of the AP is fixed. 2. High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 24 AP6050DN&AP6150DN Product Description Item 5 Technical Specifications Description Channel rate supported Receiver sensitivity (Typical values) Issue 01 (2016-05-31) 802.11b: 1, 2, 5.5, and 11 Mbit/s 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s 802.11n: 6.5 to 600 Mbit/s 802.11ac wave2: 6.5 to 1733.3 Mbit/s 2.4 GHz 2.4 GHz 2.4 GHz 2.4 GHz 802.11b 802.11g 802.11n (HT20) 802.11n(HT40) –102 dBm @ 1 Mbit/s –96 dBm @ 6 Mbit/s -96 dBm @ MCS0 -93 dBm @ MCS0 –100 dBm @ 2 Mbit/s –95 dBm @ 9 Mbit/s -93 dBm @ MCS1 -91 dBm @ MCS1 –98 dBm @ 5.5 Mbit/s –95 dBm @ 12 Mbit/s -92 dBm @ MCS2 -88 dBm @ MCS2 –95 dBm @ 11 Mbit/s –95 dBm @ 18 Mbit/s -87 dBm @ MCS3 -85 dBm @ MCS3 –90 dBm @ 24 Mbit/s -85 dBm @ MCS4 -82 dBm @ MCS4 –86 dBm @ 36 Mbit/s -81 dBm @ MCS5 -78 dBm @ MCS5 –82 dBm @ 48 Mbit/s -79 dBm @ MCS6 -76 dBm @ MCS6 –76 dBm @ 54 Mbit/s -77 dBm @ MCS7 -75 dBm @ MCS7 -94 dBm @ MCS8 -91 dBm @ MCS8 -91 dBm @ MCS9 -89 dBm @ MCS9 -90 dBm @ MCS10 -86 dBm @ MCS10 -85 dBm @ MCS11 -83 dBm @ MCS11 -83 dBm @ MCS12 -80 dBm @ MCS12 -79 dBm @ MCS13 -76 dBm @ MCS13 -77 dBm @ MCS14 -74 dBm @ MCS14 -75 dBm @ MCS15 -73 dBm @ MCS15 -92 dBm @ MCS16 -89 dBm @ MCS16 -89 dBm @ MCS17 -87 dBm @ MCS17 -88 dBm @ -84 dBm @ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 25 AP6050DN&AP6150DN Product Description Item 5 Technical Specifications Description MCS18 Issue 01 (2016-05-31) MCS18 -83 dBm @ MCS19 -81 dBm @ MCS19 -81 dBm @ MCS20 -78 dBm @ MCS20 -77 dBm @ MCS21 -74 dBm @ MCS21 -75 dBm @ MCS22 -72 dBm @ MCS22 -73 dBm @ MCS23 -71 dBm @ MCS23 -90 dBm @ MCS24 -87 dBm @ MCS24 -87 dBm @ MCS25 -85 dBm @ MCS25 -86 dBm @ MCS26 -82 dBm @ MCS26 -81 dBm @ MCS27 -79 dBm @ MCS27 -79 dBm @ MCS28 -76 dBm @ MCS28 -75 dBm @ MCS29 -72 dBm @ MCS29 -73 dBm @ MCS30 -70 dBm @ MCS30 -71 dBm @ MCS31 -69 dBm @ MCS31 5 GHz 5 GHz 5 GHz 802.11a 802.11n (HT20) 802.11n (HT40) –94 dBm @ 6 Mbit/s -94 dBm @ MCS0 -91 dBm @ MCS0 –94 dBm @ 9 Mbit/s -92 dBm @ MCS1 -89 dBm @ MCS1 –93 dBm @ 12 Mbit/s -90 dBm @ MCS2 -87 dBm @ MCS2 –91 dBm @ 18 Mbit/s -86 dBm @ MCS3 -84 dBm @ MCS3 –88 dBm @ 24 Mbit/s -83 dBm @ MCS4 -81 dBm @ MCS4 –84 dBm @ 36 Mbit/s -79 dBm @ MCS5 -77 dBm @ MCS5 –81 dBm @ 48 Mbit/s -78 dBm @ MCS6 -75 dBm @ MCS6 –74 dBm @ 54 Mbit/s -75 dBm @ MCS7 -74 dBm @ MCS7 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 26 AP6050DN&AP6150DN Product Description Item Issue 01 (2016-05-31) 5 Technical Specifications Description -92 dBm @ MCS8 -89 dBm @ MCS8 -90 dBm @ MCS9 -87 dBm @ MCS9 -88 dBm @ MCS10 -85 dBm @ MCS10 -84 dBm @ MCS11 -82 dBm @ MCS11 -81 dBm @ MCS12 -79 dBm @ MCS12 -77 dBm @ MCS13 -75 dBm @ MCS13 -76 dBm @ MCS14 -73 dBm @ MCS14 -73 dBm @ MCS15 -72 dBm @ MCS15 -90 dBm @ MCS16 -87 dBm @ MCS16 -88 dBm @ MCS17 -85 dBm @ MCS17 -86 dBm @ MCS18 -83 dBm @ MCS18 -82 dBm @ MCS19 -80 dBm @ MCS19 -79 dBm @ MCS20 -77 dBm @ MCS20 -75 dBm @ MCS21 -73 dBm @ MCS21 -74 dBm @ MCS22 -71 dBm @ MCS22 -71 dBm @ MCS23 -70 dBm @ MCS23 -88 dBm @ MCS24 -85 dBm @ MCS24 -86 dBm @ MCS25 -83 dBm @ MCS25 -84 dBm @ MCS26 -81 dBm @ MCS26 -80 dBm @ MCS27 -78 dBm @ MCS27 -77 dBm @ MCS28 -75 dBm @ MCS28 -73 dBm @ MCS29 -71 dBm @ MCS29 -72 dBm @ MCS30 -69 dBm @ MCS30 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 27 AP6050DN&AP6150DN Product Description Item 5 Technical Specifications Description Issue 01 (2016-05-31) -69 dBm @ MCS31 -68 dBm @ MCS31 5 GHz 5 GHz 5 GHz 5 GHz 802.11ac (VHT20) 802.11ac (VHT40) 802.11ac (VHT80) 802.11ac (VHT160) -94 dBm @ MCS0NSS1 -91 dBm @ MCS0NSS1 -87 dBm @ MCS0NSS1 -85 dBm @ MCS0NSS1 -92 dBm @ MCS1NSS1 -89 dBm @ MCS1NSS1 -86 dBm @ MCS1NSS1 -82 dBm @ MCS1NSS1 -89 dBm @ MCS2NSS1 -87 dBm @ MCS2NSS1 -84 dBm @ MCS2NSS1 -79 dBm @ MCS2NSS1 -86 dBm @ MCS3NSS1 -84 dBm @ MCS3NSS1 -80 dBm @ MCS3NSS1 -76 dBm @ MCS3NSS1 -83 dBm @ MCS4NSS1 -81 dBm @ MCS4NSS1 -77 dBm @ MCS4NSS1 -73 dBm @ MCS4NSS1 -79 dBm @ MCS5NSS1 -77 dBm @ MCS5NSS1 -73 dBm @ MCS5NSS1 -69 dBm @ MCS5NSS1 -78 dBm @ MCS6NSS1 -75 dBm @ MCS6NSS1 -71 dBm @ MCS6NSS1 -67 dBm @ MCS6NSS1 -73 dBm @ MCS7NSS1 -74 dBm @ MCS7NSS1 -70 dBm @ MCS7NSS1 -66 dBm @ MCS7NSS1 -72 dBm @ MCS8NSS1 -70 dBm @ MCS8NSS1 -66 dBm @ MCS8NSS1 -61 dBm @ MCS8NSS1 -92 dBm @ MCS0NSS2 -68 dBm @ MCS9NSS1 -64 dBm @ MCS9NSS1 -60 dBm @ MCS9NSS1 -90 dBm @ MCS1NSS2 -89 dBm @ MCS0NSS2 -85 dBm @ MCS0NSS2 -83 dBm @ MCS0NSS2 -87 dBm @ MCS2NSS2 -87 dBm @ MCS1NSS2 -84 dBm @ MCS1NSS2 -80 dBm @ MCS1NSS2 -84 dBm @ MCS3NSS2 -85 dBm @ MCS2NSS2 -82 dBm @ MCS2NSS2 -77 dBm @ MCS2NSS2 -81 dBm @ MCS4NSS2 -82 dBm @ MCS3NSS2 -78 dBm @ MCS3NSS2 -74 dBm @ MCS3NSS2 -77 dBm @ MCS5NSS2 -79 dBm @ MCS4NSS2 -75 dBm @ MCS4NSS2 -71 dBm @ MCS4NSS2 -76 dBm @ MCS6NSS2 -75 dBm @ MCS5NSS2 -71 dBm @ MCS5NSS2 -67 dBm @ MCS5NSS2 -71 dBm @ MCS7NSS2 -73 dBm @ MCS6NSS2 -69 dBm @ MCS6NSS2 -65 dBm @ MCS6NSS2 -70 dBm @ MCS8NSS2 -72 dBm @ MCS7NSS2 -68 dBm @ MCS7NSS2 -64 dBm @ MCS7NSS2 -90 dBm @ MCS0NSS3 -68 dBm @ MCS8NSS2 -64 dBm @ MCS8NSS2 -59 dBm @ MCS8NSS2 -88 dBm @ MCS1NSS3 -66 dBm @ MCS9NSS2 -62 dBm @ MCS9NSS2 -58 dBm @ MCS9NSS2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 28 AP6050DN&AP6150DN Product Description Item Issue 01 (2016-05-31) 5 Technical Specifications Description -85 dBm @ MCS2NSS3 -87 dBm @ MCS0NSS3 -83 dBm @ MCS0NSS3 -82 dBm @ MCS3NSS3 -85 dBm @ MCS1NSS3 -82 dBm @ MCS1NSS3 -79 dBm @ MCS4NSS3 -83 dBm @ MCS2NSS3 -80 dBm @ MCS2NSS3 -75 dBm @ MCS5NSS3 -80 dBm @ MCS3NSS3 -76 dBm @ MCS3NSS3 -74 dBm @ MCS6NSS3 -77 dBm @ MCS4NSS3 -73 dBm @ MCS4NSS3 -69 dBm @ MCS7NSS3 -73 dBm @ MCS5NSS3 -69 dBm @ MCS5NSS3 -68 dBm @ MCS8NSS3 -71 dBm @ MCS6NSS3 -66 dBm @ MCS7NSS3 -66 dBm @ MCS9NSS3 -70 dBm @ MCS7NSS3 -62 dBm @ MCS8NSS3 -88 dBm @ MCS0NSS4 -66 dBm @ MCS8NSS3 -60 dBm @ MCS9NSS3 -86 dBm @ MCS1NSS4 -64 dBm @ MCS9NSS3 -81 dBm @ MCS0NSS4 -83 dBm @ MCS2NSS4 -85 dBm @ MCS0NSS4 -80 dBm @ MCS1NSS4 -80 dBm @ MCS3NSS4 -83 dBm @ MCS1NSS4 -78 dBm @ MCS2NSS4 -77 dBm @ MCS4NSS4 -81 dBm @ MCS2NSS4 -74 dBm @ MCS3NSS4 -73 dBm @ MCS5NSS4 -78 dBm @ MCS3NSS4 -71 dBm @ MCS4NSS4 -72 dBm @ MCS6NSS4 -75 dBm @ MCS4NSS4 -67 dBm @ MCS5NSS4 -67 dBm @ MCS7NSS4 -71 dBm @ MCS5NSS4 -65 dBm @ MCS6NSS4 -66 dBm @ MCS8NSS4 -69 dBm @ MCS6NSS4 -64 dBm @ MCS7NSS4 -68 dBm @ MCS7NSS4 -60 dBm @ MCS8NSS4 -64 dBm @ MCS8NSS4 -58 dBm @ MCS9NSS4 -62 dBm @ MCS9NSS4 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 29 AP6050DN&AP6150DN Product Description 5 Technical Specifications 5.3 Standards Compliance Safety Standards UL 60950–1 CAN/CSA 22.2 No.60950-1 IEC 60950–1 EN 60950–1 GB 4943 Radio Standards ETSI EN 300 328 ETSI EN 301 893 FCC Part 15C: 15.247 FCC Part 15C: 15.407 RSS-210 AS/NZS 4268 EMC Standards EN 301 489–1 EN 301 489–17 ETSI EN 60601-1-2 FCC Part 15 ICES-003 YD/T 1312.2-2004 ITU k.20 GB 9254 GB 17625.1 AS/NZS CISPR22 EN 55022 EN 55024 CISPR 22 CISPR 24 IEC61000-4-6 IEC61000-4-2 IEEE Standards IEEE 802.11a/b/g IEEE 802.11n IEEE 802.11ac IEEE 802.11h IEEE 802.11d Issue 01 (2016-05-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 30 AP6050DN&AP6150DN Product Description 5 Technical Specifications IEEE 802.11e Security Standards 802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA 802.1X Advanced Encryption Standards (AES) and Temporal Key Integrity Protocol (TKIP) EAP Type (s) CENELEC EN 62311 CENELEC EN 50385 OET65 RSS-102 FCC Part1&2 FCC KDB series Directive 2002/95/EC & 2011/65/EU Regulation 1907/2006/EC Directive 2002/96/EC & 2012/19/EU EMF RoHS Reach WEEE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement Issue 01 (2016-05-31) This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 31 AP6050DN&AP6150DN Product Description 5 Technical Specifications antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Issue 01 (2016-05-31) Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 32
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 37 Language : zh-CN Tagged PDF : Yes Title : Product Description Author : Huawei Technologies Co.,Ltd. Subject : Technical Document Creator : Microsoft® Office Word 2007 Create Date : 2016:11:18 19:09:39+08:00 Modify Date : 2016:11:18 19:09:39+08:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools