Huawei Technologies AR-SA-LA-BC Access Router User Manual Part 1

Download:
Mirror Download [FCC.gov]
Document ID	3536179
Application ID	3SKnmZLM5AEGkucHP4Mb/w==
Document Description	User Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	158.81kB (1985071 bits)
Date Submitted	2017-08-30 00:00:00
Date Available	2017-08-30 00:00:00
Creation Date	2017-07-18 20:13:29
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-07-18 20:13:29
Document Title	AR-Sc&AR-Se&AR-Sa&AR-So Series Elevator Gateways Quick Start Guide
Document Creator	Adobe Illustrator CS6 (Windows)

Quick Start Guide
AR-Sc&AR-Se&AR-Sa
&AR-So Series Elevator Gateways
01 (2017-07-15) Part number: 31508106
Packing List
Router (1, with product model on the nameplate)
Installation accessories:
LTE remote antenna (1)
Note
Quick Start Guide (1)
The types and quantities of items in the installation accessory package vary
depending on the router configuration.
Appearance
Note
The AR-Sc-Lc-BC, AR-SC-U-BC, AR-Se-U-BC, AR-Se-L-BC, AR-Sa-U-BC, and
AR-Sa-La-BC routers are the same in appearance and indicators and only differ in
nameplates. AR-Sc-Lc-BC is used as an example here.
The AR-Sc-Lc-MC, AR-Se-L-MC, and AR-Sa-La-MC routers are the same in appearance
and indicators and only differ in nameplates. AR-Sc-Lc-MC is used as an example here.
The AR-Sc-MC and AR-Se-MC routers are the same in appearance and indicators and
only differ in nameplates. AR-Sc-MC is used as an example here.
AR-Sc-Lc-BC (front view)
Primary LTE antenna interface RS485 interface
Secondary LTE antenna interface
RS232 interface
SIM card slot
FXS interface
CAN interface
MAIN
Eth0/WAN
SIM
FXS
RS232
Eth1
RS485
Eth2
Eth3
DI
CAN
DIV
DO
micro SD
- TX RX
PWR
Power socket
DI/DO interface
USB interface
Four 100M electrical interfaces
Micro SD card slot
AR-Sc-Lc-BC (rear view)
AR-Sc-Lc-MC (front view)
Primary LTE antenna interface
Secondary LTE antenna interface
SIM card slot
Two RS232 interfaces
FXS interface
Two CAN interfaces
SIM
MAIN
FXS
Eth0/WAN
RS232-0
Eth1
RS232-1
Eth2
Eth3
DI
CAN-0
+ -
CAN-1
DIV
DO
micro SD
- TX RX
PWR
Power socket
DI/DO interface
USB interface
Four 100M electrical interfaces
Micro SD card slot
AR-Sc-Lc-MC (rear view)
AR-Sc-MC (front view)
FXS interface
Two RS232 interfaces
Two CAN interfaces
FXS
Eth0/WAN
RS232-0
Eth1
RS232-1
Eth2
Eth3
DI
CAN-0
+ -
CAN-1
DO
micro SD
DI/DO interface
USB interface
Four 100M electrical interfaces
- TX RX
PWR
Power socket
Micro SD card slot
AR-Sc-MC (rear view)
AR-PM4 (front view)
AR-PM1 (front view)
Output
Input
Input
INPUT:~100-240V；50/60Hz;0.8A
INPUT:~100-240V；50/60Hz;0.8A
12V GND RX TX
OUTPUT: 12V;0.8A
Output
12V GND RX TX
OUTPUT: 12V;0.8A
L/+
N/-
AR-PM4 (rear view)
AR-PM1 (rear view)
Indicator Description
Indicators of AR-Sc-Lc-MC
Indicators of AR-Sc-Lc-BC
1 2 3 10
4 5 6
PWR
FXS
RS232
RS485
CAN
SIGNAL
DI
Eth0/WAN
Eth1
Eth2
Eth3
CIL2
CIL3
CIL4
CIL1
1 2
PWR
FXS
Eth0/WAN
Eth1
RS232-0 RS232-1
Eth2
Eth3
5 6
CAN-0
CAN-1
SIGNAL
DI
CIL1
CIL2
CIL3
CIL4
BLE/RST
BLE/RST
Schindler
Schindler
Indicators of AR-Sc-MC
1 2
PWR
FXS
Eth0/WAN
Eth1
RS232-0 RS232-1
Eth2
Eth3
CAN-0
CAN-1
CIL1
CIL2
DI
CIL3
CIL4
BLE/RST
Schindler
Indicators of AR-PM4
Indicators of AR-PM1
11
12
13
14
11 12 1314
SYS
DC/BAT
RS232
SYS
DC/BAT
RS232
STA
STA
Schindler
Schindler
Number
Indicator
Description
PWR
Steady green: The power supply to the router is normal.
Off: The router receives no power supply.
FXS
Steady green: The FXS channel is idle.
Blinking green: There is an ongoing call on the FXS channel.
Off: The FXS channel is occupied.
RS232
Indicator states can be user defined.
CAN
Indicator states can be user defined.
SIGNAL
Indicator states can be user defined.
DI
Indicator states can be user defined.
CIL（CIL1～CIL4）
Indicator states can be user defined.
Steady green: A link has been established on the corresponding
interface.
Eth（Eth0/WAN～Eth3） Blinking green: Data is being transmitted on the corresponding
link.
Of: No link is established on the corresponding interface.
CL1
BLE/RST
10
RS485
11
SYS
12
DC/BAT
13
RS232
14
STA
CL2
CL3
CL4
Press once to
enable Bluetooth
Fast blink
Press twice to
reset the router
Fast blink Fast blink Steady on Steady on
Press 3 times to
restore factory
settings
Fast blink Steady on
Fast blink Fast blink Steady on
Steady on Steady on
Indicator states can be user defined.
Steady green: The UPS is starting.
Blinking green: The UPS has started successfully.
Off: The UPS has not started.
Steady green: The power module of the router is working.
Blinking green: The UPS is working.
Off: The UPS is not working.
Steady green: The router is connected to the UPS.
Off: The router is not connected to the UPS.
Steady green: The battery of the UPS is working normally.
Fast blinking green: The batter of the UPS can provide power
supply for less than 1 hour (4 hours).
Slow blinking green: The battery of the UPS has failed or run
out of power.
Off: The UPS is not working.
Installing the Router
The methods for installing, connoting and logging in to the AR-Sc, AR-Se, AR-Sa, AR-So
Note
series routers and AR-PM series UPS are similar. AR-Sc-Lc-MC is used as an example here.
AR-PM series UPS cannot be mounted on a Wall.
Scenario 1: Installing the Router on a DIN Rail
Before the installation, ensure the following:
Sufficient space has been reserved for the router.
The DIN rail has been fixed.
1 Pull the fixture on the DIN rail mounting
kit at the back of the router.
2 Place the DIN rail mounting kit onto
the DIN rail and press the fixture to
secure the router on the DIN rail.
Fixture
PWR
FXS
Eth0/WAN
Eth1
RS232-0 RS232-
Eth2
Eth3
CAN-0
CAN-1
SIGNAL
CIL1
CIL2
CIL3
DI
CIL4
BLE/RST
Schindler
Scenario 2: Mounting the Router on a Wall
Installation Method 1
1 Mark the positions of two mounting
2 Drill holes for ST4.2 tapping screws on
holes on the wall.
PWR
FXS
Eth0/WAN
Eth1
RS232-0 RS232-1
Eth2
Eth3
CAN-0
CAN-1
SIGNAL
DI
CIL1
CIL2
CIL3
CIL4
the wall using a hammer drill with an
appropriate drill bit.
BLE/RST
90°
Schindler
3 Hammer hollow wall anchors
4 Hold the bottom of the router and
fix it on the wall with two ST4.2
tapping screws.
into the mounting holes.
Note
90°
The torque for an ST4.2 screw is 0.8 N·m.
PWR
Eth0/WAN
FXS
Eth1
RS232-0
Eth2
RS232-1
Eth3
CAN-0
CIL1
CAN-1
CIL2
SIGNAL
CIL3
DI
CIL4
BLE/RST
er
Schindl
Installation Method 2
1 Mark the positions of two mounting
2 Drill holes for ST4.2 tapping screws on
holes on the wall.
the wall using a hammer drill with an
appropriate drill bit.
105.3m
90°
unting
pre-mo
hole
3 Hammer hollow wall anchors
into the mounting holes.
90°
5 Hang the router on the tapping
4 Use a Phillips screwdriver to screw an
ST4.2 tapping screw into the
pre-mounting hole. Leave 4 mm length
of the screw out of the wall.
4mm
Removing the Router from the DIN Rail
1 Use a flat-head screwdriver to press the
metal plate on the DIN rail mounting kit,
remove the fixture, and then remove the
router from the DIN rail.
screw through the pre-mounting
hole at the back. Hold the bottom
of the router and use another ST4.2
tapping screw to secure the router
on the wall.
Removing the Router from the Wall
Note
The router is removed in the same way
regardless of whether it has been
installed using method 1 or 2. In this
example, the router is installed using
method 1.
1 Hold the bottom of the router, use a
PWR
FXS
Eth0/WAN
Eth1
RS232-0 RS232-
Eth2
Eth3
CAN-0
CAN-1
SIGNAL
CIL1
CIL2
CIL3
Phillips screwdriver to loosen the
tapping screws, and then remove the
router from the wall.
DI
CIL4
BLE/RST
Schindler
PWR
Eth0/WAN
FXS
Eth1
RS232-0
Eth2
RS232-1
Eth3
CAN-0
CIL1
CAN-1
CIL2
SIGNAL
CIL3
DI
CIL4
BLE/RST
er
Schindl
Connecting the Router
WARNING
To avoid electric shock, do not connect power cables while the power is on.
Do not power on the router before you finish connecting and arranging cables.
Note
An LTE remote antenna is delivered with the router. Connect it to the LTE MAIN
interface of the router.
For other interfaces, make cables onsite using self-provided terminals. The following
tables provide pin assignments of different interfaces.
The FXS interface cannot connect to a PSTN network and is only used for internal.
Power socket pin assignments
Pin
USB interface pin assignments
Pin
Signal Type
Signal Type
VBUS
D-
TX
D+
RX
GND
RS485 interface pin assignments
FXS interface pin assignments
Pin
Signal Type
Pin
Signal Type
RS485 a
RS485 b
C_GND
DI/DO interface pin assignments
CAN interface pin assignments
Pin
Pin
Signal Type
CAN_L
CAN_H
NC
Signal Type
DI+
DI-
DO+
DO-
Eth interface pin assignments
RS232 interface pin assignments
Pin
Signal Type
COM
RX
TX
NC
RTS
CTS
Pin
Signal Type
TX+
TX-
RX+
NC
NC
RX-
NC
NC
Connecting the Router to a UPS
Note
The AR-Sc and AR-Se series routers support AR-PM1 UPS power supplies.
The AR-Se-MC, AR-So and AR-Sa series routers support AR-PM4 UPS power supplies.
The routers are connected to a UPS in the same way. The following example connects an
AR-Sc-Lc-BC router to an AR-PM1 UPS.
10
Power output cable: delivered with the UPS.
Power input cable: made onsite using the 2-pin terminal block delivered with the UPS.
The diameter of the cable must be 16-22 AWG.
FXS
Eth0/WAN
RS232
Eth1
RS485
Eth2
Eth3
DI
CAN
DO
12V GND RX TX
OUTPUT: 12V;0.8A
DIV
micro SD
INPUT:~100-240V；50/60Hz;0.8A
SIM
MAIN
- TX RX
PWR
Power output cable
External power source
Powering On the Router
1 Before you power on the router, ensure the following:
The power cable has been properly connected.
The input voltage is within the normal range (12 V DC to 24 V DC).
2 Turn on the power switch of the external power supply system.
3 Check the PWR indicator on the front panel of the router.
PWR Steady green: The system power
supply is normal.
PWR
FXS
Eth0/WAN
Eth1
RS232-0 RS232-1
Eth2
Eth3
CAN-0
CAN-1
SIGNAL
DI
CIL1
CIL2
CIL3
CIL4
BLE/RST
Schindler
Declaration of Conformity
Hereby, Huawei Technologies Co., Ltd. declares that the radio equipment type
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.huawei.com/en/product-certification.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : AR-Sc&AR-Se&AR-Sa&AR-So Series Elevator Gateways Quick Start Guide
Metadata Date                   : 2017:07:18 20:13:29+08:00
Modify Date                     : 2017:07:18 20:13:29+08:00
Create Date                     : 2017:07:18 20:13:29+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 32
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5528 bytes, use -b option to extract)
Instance ID                     : uuid:eb0e7c04-d408-4cc0-b7b3-efbb654602b6
Document ID                     : xmp.did:821677DE856BE71197C794AC44C2C368
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:844a827c-ffcd-4e8a-bf33-4aa221f39b05
Derived From Document ID        : xmp.did:12520948618EE511B2DAD433744077F4
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:8F6B760E09EEE3118F86F4C9753E304E, xmp.iid:821677DE856BE71197C794AC44C2C368
History When                    : 2014:06:07 14:13:33+08:00, 2017:07:18 20:13:25+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 148.000958
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, FZZZHONGJW--GB1-0, AdobeSongStd-Light, MicrosoftYaHei, MicrosoftYaHei-Bold
Font Family                     : Arial, 方正正中黑简体, Adobe 宋体 Std, 微软雅黑, 微软雅黑
Font Face                       : Regular, Regular, L, Regular, Bold
Font Type                       : Open Type, TrueType, Open Type, Open Type, Open Type
Font Version                    : Version 5.10, 1.00, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.02, Version 6.02
Font Composite                  : False, False, False, False, False
Font File Name                  : arial_1.ttf, 方正正中黑简体.TTF, AdobeSongStd-Light_0.otf, msyh.ttf, msyhbd.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 71.999997
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Red     : 126
Swatch Groups Colorants Green   : 49
Swatch Groups Colorants Blue    : 141
Producer                        : Adobe PDF library 10.01
Page Count                      : 12
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools