Huawei Technologies AR-SA-U-BC Access Router User Manual Part 1
Huawei Technologies Co.,Ltd Access Router Users Manual Part 1
Users Manual Part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3533371 |
| Application ID | hxRXv8y4kPA359JWc4kEww== |
| Document Description | Users Manual Part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 158.81kB (1985071 bits) |
| Date Submitted | 2017-08-29 00:00:00 |
| Date Available | 2017-08-29 00:00:00 |
| Creation Date | 2017-07-18 20:13:29 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2017-07-18 20:13:29 |
| Document Title | AR-Sc&AR-Se&AR-Sa&AR-So Series Elevator Gateways Quick Start Guide |
| Document Creator | Adobe Illustrator CS6 (Windows) |
Quick Start Guide AR-Sc&AR-Se&AR-Sa &AR-So Series Elevator Gateways 01 (2017-07-15) Part number: 31508106 Packing List Router (1, with product model on the nameplate) Installation accessories: LTE remote antenna (1) Note Quick Start Guide (1) The types and quantities of items in the installation accessory package vary depending on the router configuration. Appearance Note The AR-Sc-Lc-BC, AR-SC-U-BC, AR-Se-U-BC, AR-Se-L-BC, AR-Sa-U-BC, and AR-Sa-La-BC routers are the same in appearance and indicators and only differ in nameplates. AR-Sc-Lc-BC is used as an example here. The AR-Sc-Lc-MC, AR-Se-L-MC, and AR-Sa-La-MC routers are the same in appearance and indicators and only differ in nameplates. AR-Sc-Lc-MC is used as an example here. The AR-Sc-MC and AR-Se-MC routers are the same in appearance and indicators and only differ in nameplates. AR-Sc-MC is used as an example here. AR-Sc-Lc-BC (front view) Primary LTE antenna interface RS485 interface Secondary LTE antenna interface RS232 interface SIM card slot FXS interface CAN interface MAIN Eth0/WAN SIM FXS RS232 Eth1 RS485 Eth2 Eth3 DI CAN DIV DO micro SD - TX RX PWR Power socket DI/DO interface USB interface Four 100M electrical interfaces Micro SD card slot AR-Sc-Lc-BC (rear view) AR-Sc-Lc-MC (front view) Primary LTE antenna interface Secondary LTE antenna interface SIM card slot Two RS232 interfaces FXS interface Two CAN interfaces SIM MAIN FXS Eth0/WAN RS232-0 Eth1 RS232-1 Eth2 Eth3 DI CAN-0 + - CAN-1 DIV DO micro SD - TX RX PWR Power socket DI/DO interface USB interface Four 100M electrical interfaces Micro SD card slot AR-Sc-Lc-MC (rear view) AR-Sc-MC (front view) FXS interface Two RS232 interfaces Two CAN interfaces FXS Eth0/WAN RS232-0 Eth1 RS232-1 Eth2 Eth3 DI CAN-0 + - CAN-1 DO micro SD DI/DO interface USB interface Four 100M electrical interfaces - TX RX PWR Power socket Micro SD card slot AR-Sc-MC (rear view) AR-PM4 (front view) AR-PM1 (front view) Output Input Input INPUT:~100-240V；50/60Hz;0.8A INPUT:~100-240V；50/60Hz;0.8A 12V GND RX TX OUTPUT: 12V;0.8A Output 12V GND RX TX OUTPUT: 12V;0.8A L/+ N/- AR-PM4 (rear view) AR-PM1 (rear view) Indicator Description Indicators of AR-Sc-Lc-MC Indicators of AR-Sc-Lc-BC 1 2 3 10 4 5 6 PWR FXS RS232 RS485 CAN SIGNAL DI Eth0/WAN Eth1 Eth2 Eth3 CIL2 CIL3 CIL4 CIL1 1 2 PWR FXS Eth0/WAN Eth1 RS232-0 RS232-1 Eth2 Eth3 5 6 CAN-0 CAN-1 SIGNAL DI CIL1 CIL2 CIL3 CIL4 BLE/RST BLE/RST Schindler Schindler Indicators of AR-Sc-MC 1 2 PWR FXS Eth0/WAN Eth1 RS232-0 RS232-1 Eth2 Eth3 CAN-0 CAN-1 CIL1 CIL2 DI CIL3 CIL4 BLE/RST Schindler Indicators of AR-PM4 Indicators of AR-PM1 11 12 13 14 11 12 1314 SYS DC/BAT RS232 SYS DC/BAT RS232 STA STA Schindler Schindler Number Indicator Description PWR Steady green: The power supply to the router is normal. Off: The router receives no power supply. FXS Steady green: The FXS channel is idle. Blinking green: There is an ongoing call on the FXS channel. Off: The FXS channel is occupied. RS232 Indicator states can be user defined. CAN Indicator states can be user defined. SIGNAL Indicator states can be user defined. DI Indicator states can be user defined. CIL（CIL1～CIL4） Indicator states can be user defined. Steady green: A link has been established on the corresponding interface. Eth（Eth0/WAN～Eth3） Blinking green: Data is being transmitted on the corresponding link. Of: No link is established on the corresponding interface. CL1 BLE/RST 10 RS485 11 SYS 12 DC/BAT 13 RS232 14 STA CL2 CL3 CL4 Press once to enable Bluetooth Fast blink Press twice to reset the router Fast blink Fast blink Steady on Steady on Press 3 times to restore factory settings Fast blink Steady on Fast blink Fast blink Steady on Steady on Steady on Indicator states can be user defined. Steady green: The UPS is starting. Blinking green: The UPS has started successfully. Off: The UPS has not started. Steady green: The power module of the router is working. Blinking green: The UPS is working. Off: The UPS is not working. Steady green: The router is connected to the UPS. Off: The router is not connected to the UPS. Steady green: The battery of the UPS is working normally. Fast blinking green: The batter of the UPS can provide power supply for less than 1 hour (4 hours). Slow blinking green: The battery of the UPS has failed or run out of power. Off: The UPS is not working. Installing the Router The methods for installing, connoting and logging in to the AR-Sc, AR-Se, AR-Sa, AR-So Note series routers and AR-PM series UPS are similar. AR-Sc-Lc-MC is used as an example here. AR-PM series UPS cannot be mounted on a Wall. Scenario 1: Installing the Router on a DIN Rail Before the installation, ensure the following: Sufficient space has been reserved for the router. The DIN rail has been fixed. 1 Pull the fixture on the DIN rail mounting kit at the back of the router. 2 Place the DIN rail mounting kit onto the DIN rail and press the fixture to secure the router on the DIN rail. Fixture PWR FXS Eth0/WAN Eth1 RS232-0 RS232- Eth2 Eth3 CAN-0 CAN-1 SIGNAL CIL1 CIL2 CIL3 DI CIL4 BLE/RST Schindler Scenario 2: Mounting the Router on a Wall Installation Method 1 1 Mark the positions of two mounting 2 Drill holes for ST4.2 tapping screws on holes on the wall. PWR FXS Eth0/WAN Eth1 RS232-0 RS232-1 Eth2 Eth3 CAN-0 CAN-1 SIGNAL DI CIL1 CIL2 CIL3 CIL4 the wall using a hammer drill with an appropriate drill bit. BLE/RST 90° Schindler 3 Hammer hollow wall anchors 4 Hold the bottom of the router and fix it on the wall with two ST4.2 tapping screws. into the mounting holes. Note 90° The torque for an ST4.2 screw is 0.8 N·m. PWR Eth0/WAN FXS Eth1 RS232-0 Eth2 RS232-1 Eth3 CAN-0 CIL1 CAN-1 CIL2 SIGNAL CIL3 DI CIL4 BLE/RST er Schindl Installation Method 2 1 Mark the positions of two mounting 2 Drill holes for ST4.2 tapping screws on holes on the wall. the wall using a hammer drill with an appropriate drill bit. 105.3m 90° unting pre-mo hole 3 Hammer hollow wall anchors into the mounting holes. 90° 5 Hang the router on the tapping 4 Use a Phillips screwdriver to screw an ST4.2 tapping screw into the pre-mounting hole. Leave 4 mm length of the screw out of the wall. 4mm Removing the Router from the DIN Rail 1 Use a flat-head screwdriver to press the metal plate on the DIN rail mounting kit, remove the fixture, and then remove the router from the DIN rail. screw through the pre-mounting hole at the back. Hold the bottom of the router and use another ST4.2 tapping screw to secure the router on the wall. Removing the Router from the Wall Note The router is removed in the same way regardless of whether it has been installed using method 1 or 2. In this example, the router is installed using method 1. 1 Hold the bottom of the router, use a PWR FXS Eth0/WAN Eth1 RS232-0 RS232- Eth2 Eth3 CAN-0 CAN-1 SIGNAL CIL1 CIL2 CIL3 Phillips screwdriver to loosen the tapping screws, and then remove the router from the wall. DI CIL4 BLE/RST Schindler PWR Eth0/WAN FXS Eth1 RS232-0 Eth2 RS232-1 Eth3 CAN-0 CIL1 CAN-1 CIL2 SIGNAL CIL3 DI CIL4 BLE/RST er Schindl Connecting the Router WARNING To avoid electric shock, do not connect power cables while the power is on. Do not power on the router before you finish connecting and arranging cables. Note An LTE remote antenna is delivered with the router. Connect it to the LTE MAIN interface of the router. For other interfaces, make cables onsite using self-provided terminals. The following tables provide pin assignments of different interfaces. The FXS interface cannot connect to a PSTN network and is only used for internal. Power socket pin assignments Pin USB interface pin assignments Pin Signal Type Signal Type VBUS D- TX D+ RX GND RS485 interface pin assignments FXS interface pin assignments Pin Signal Type Pin Signal Type RS485 a RS485 b C_GND DI/DO interface pin assignments CAN interface pin assignments Pin Pin Signal Type CAN_L CAN_H NC Signal Type DI+ DI- DO+ DO- Eth interface pin assignments RS232 interface pin assignments Pin Signal Type COM RX TX NC RTS CTS Pin Signal Type TX+ TX- RX+ NC NC RX- NC NC Connecting the Router to a UPS Note The AR-Sc and AR-Se series routers support AR-PM1 UPS power supplies. The AR-Se-MC, AR-So and AR-Sa series routers support AR-PM4 UPS power supplies. The routers are connected to a UPS in the same way. The following example connects an AR-Sc-Lc-BC router to an AR-PM1 UPS. 10 Power output cable: delivered with the UPS. Power input cable: made onsite using the 2-pin terminal block delivered with the UPS. The diameter of the cable must be 16-22 AWG. FXS Eth0/WAN RS232 Eth1 RS485 Eth2 Eth3 DI CAN DO 12V GND RX TX OUTPUT: 12V;0.8A DIV micro SD INPUT:~100-240V；50/60Hz;0.8A SIM MAIN - TX RX PWR Power output cable External power source Powering On the Router 1 Before you power on the router, ensure the following: The power cable has been properly connected. The input voltage is within the normal range (12 V DC to 24 V DC). 2 Turn on the power switch of the external power supply system. 3 Check the PWR indicator on the front panel of the router. PWR Steady green: The system power supply is normal. PWR FXS Eth0/WAN Eth1 RS232-0 RS232-1 Eth2 Eth3 CAN-0 CAN-1 SIGNAL DI CIL1 CIL2 CIL3 CIL4 BLE/RST Schindler Declaration of Conformity Hereby, Huawei Technologies Co., Ltd. declares that the radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.huawei.com/en/product-certification. 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : AR-Sc&AR-Se&AR-Sa&AR-So Series Elevator Gateways Quick Start Guide Metadata Date : 2017:07:18 20:13:29+08:00 Modify Date : 2017:07:18 20:13:29+08:00 Create Date : 2017:07:18 20:13:29+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 32 Thumbnail Format : JPEG Thumbnail Image : (Binary data 5528 bytes, use -b option to extract) Instance ID : uuid:eb0e7c04-d408-4cc0-b7b3-efbb654602b6 Document ID : xmp.did:821677DE856BE71197C794AC44C2C368 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:844a827c-ffcd-4e8a-bf33-4aa221f39b05 Derived From Document ID : xmp.did:12520948618EE511B2DAD433744077F4 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:8F6B760E09EEE3118F86F4C9753E304E, xmp.iid:821677DE856BE71197C794AC44C2C368 History When : 2014:06:07 14:13:33+08:00, 2017:07:18 20:13:25+08:00 History Software Agent : Adobe Illustrator CS5.1, Adobe Illustrator CS6 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 148.000958 Max Page Size H : 210.001652 Max Page Size Unit : Millimeters Font Name : ArialMT, FZZZHONGJW--GB1-0, AdobeSongStd-Light, MicrosoftYaHei, MicrosoftYaHei-Bold Font Family : Arial, 方正正中黑简体, Adobe 宋体 Std, 微软雅黑, 微软雅黑 Font Face : Regular, Regular, L, Regular, Bold Font Type : Open Type, TrueType, Open Type, Open Type, Open Type Font Version : Version 5.10, 1.00, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.02, Version 6.02 Font Composite : False, False, False, False, False Font File Name : arial_1.ttf, 方正正中黑简体.TTF, AdobeSongStd-Light_0.otf, msyh.ttf, msyhbd.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 0.000000 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 71.999997 Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : RGB Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Red : 126 Swatch Groups Colorants Green : 49 Swatch Groups Colorants Blue : 141 Producer : Adobe PDF library 10.01 Page Count : 12 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools