Huawei Technologies B5142 B43 TD-LTE Indoor CPE User Manual Quick Start Guide

WLTFSR

-115GN

Quick Start Guide

Issue

01

Date

2014-10-15

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: support@huawei.com

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

Contents

Contents ............................................................................................................................................ ii

1 About This Document .................................................................................................................. 1

2 What You Need .............................................................................................................................. 2

3 LED Indicators ............................................................................................................................... 3

4 Connectors ...................................................................................................................................... 5

5 Installation ....................................................................................................................................... 7

6 Easy Setup....................................................................................................................................... 8

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

1 About This Document

Change History

Changes between document issues are cumulative. The latest document issue contains all the

changes made in earlier issues.

Issue 01 (2014-10-15)

This is the first release.

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

2 What You Need

The LTE Indoor CPE Quick Start Guide

RJ45 Cable for connecting the CPE and

the computer Power Adapter

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

3 LED Indicators

3

4

5

2

1

6

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

3 LED Indicators

1

Power

ON

Power ON

OFF

Power OFF

2

LAN

ON

LAN activated

OFF

LAN deactivated

Flashing

Transmitting data

3

VoIP

ON

SIP Register

OFF

SIP Unregister

Flashing

Unhook

4

WiFi Status

ON

Wi-Fi ON

OFF

Wi-Fi OFF

Flashing

Transmitting data

5

SIM Card Status

ON

SIM card detected

OFF

No SIM card inside

6

Signal Strength

ON

Display signal strength

1 LED: 0<=CINR<8

2 LED: 8<=CINR<12

3 LED: 12<=CINR<16

4 LED: 16<=CINR<24

5 LED: 24<=CINR

OFF

No signal

Flashing

Scanning Base Station

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

4 Connectors

1

2

3

4

5

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

4 Connectors

1. Reset Button: Press “Reset” button for less than 5 seconds to reboot the device. Or press and

hold the Reset button for more than 10 seconds to set the device to factory default settings.

2. SIM card slot: Insert SIM card into the slot with right direction.

3. Telephone Port (RJ-11): Connect your telephone to LTE Indoor CPE using RJ-11 telephone

cable.

4. LAN Port (RJ-45): This port is for connecting LTE Indoor CPE to your PC or other network

equipments (such as hubs or switches) with a RJ-45 Ethernet cable.

5. DC-12V Port (Power Adapter Socket): Connect the power adapter provided with LTE Indoor

CPE.

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

5 Installation

Please follow the steps below to install the device:

Step1: Connect the device LAN port to your PC with a RJ-45 Ethernet cable that is supplied.

Step2: Insert SIM card into the device with right direction.

Step3: Insert the power cord into the LTE Indoor CPE's DC-12V power jack; and insert the plug

into power outlet.

Step4: Switch ON the power. The device will start the booting process. After a few seconds, the

LED lights will start blinking.

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

6 Easy Setup

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

6 Easy Setup

Please follow the steps below to configure your device through the web interface:

Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the IDU CPE :

http://192.168.1.1

Step2: Enter IDU administrator login username/password to access the web management interface.

The default username/password is admin/LTEcpe.

The page displays in your browser after login; you can simply configure the device settings.

There is a “signal strength” sign on the upper-left corner of the screen; and there are two different

types of images to indicate different connection status.

LTE Indoor CPE successfully connected to eNodeB. The number of the bar shows in

green color indicate the signal strength of LTE; the more the green bars show

expressed the stronger signal the CPE has.

LTE Indoor CPE didn’t attach to the eNodeB; please check the settings.

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

WLTFSR-115GN Quick Start Guide For FCC-rev

7 FCC Statement

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Issue 01 (2014-10-15) Huawei Proprietary and Confidential

Huawei Technologies B5142 B43 TD-LTE Indoor CPE User Manual Quick Start Guide

Huawei Technologies Co.,Ltd B43 TD-LTE Indoor CPE Quick Start Guide

UserMan_QISB5142

Navigation menu

Namespaces

Views

Navigation