Huawei Technologies C7500 CDMA 1X Digital Mobile Phone User Manual

Huawei Technologies Co.,Ltd CDMA 1X Digital Mobile Phone

User Manual

C7500 CDMA 1X Mobile Phone and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co.,Ltd. Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129,Tel: +86-755-28780808 Global Hotline: +86-755-28560808 People's Republic of China E-mail: mobile@huawei. com Website: www.huawei.com
ei Technologies Co., Ltd. y prior written consent of Huawei Ltd. emarks Copyright © 2009 Huaw All Rights Reserved No part of this manual may be reproduced or transmitted in anrm or by any means withoutfoTechnologies Co., Trad and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. l other trademarks mentionAlof ed in this manual are the property spective holders. ents, t e the warranty of any kind, express or implied. their re Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statemon, and recommendations in this manual do noinformaticonstitut
1 Your Phone Stylus PenEarpieceNavigation KeysOK KeyRight Soft KeyEnd/Power KeyCharger Interface/Data Cable ConnectorTalk/Send KeyLeft Soft KeyScreenHeadset Jack
2 Keys and Functions Press… To… z Power on or off the phone (by pressing and holding it). z End a call or reject an incoming call. z Return to the home screen. z View the call log in the standby mode. z Make or answer a call. z Display the Menu interface in the standby mode. z Confirm a selection. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. z Display the Profiles interface ( ), the Messages interface ( ), the Create Message interface (by pressing and holding ), the Scheduler interface (), and the Alarms interface ( ) in the standby mode. Display the Camera menu.
1 Screen Icons Icon Description Icon Description Network signal strength Battery power level No network signal General profile roaming Silence profile MMS received Meeting profile Bluetooth actived Outdoor profile Message received My profile 1 Memory for messages full My profile 2 Urgent message received Alarm clock on
2 Menu Tree 1 All Calls2 Missed Calls3 Received Calls4 Dialled Calls5CallMemo6CallDuration1CreateMessage2Inbox3Outbox4Drafts5VoiceMail6Templates7 Recipient List8 My Folder9Settings0 Delete AllTools1 Automatic Tuning2 Manual Tuning1 General2 Silence3 Meeting4 Outdoor5MyProfile 16MyProfile 21 Display Settings2Date&Time3 Call Settings4Phone Settings5 Security Settings6 Restore FatorySettings1Search2Search by3AddNew4Groups5 Speed Dial6 My Number7 Management1Recorder2Alarms3 Schedulers4Calculator5 Stopwatch6WorldClock7 GalleryProfilesContactsSettingsCall HistoryBrewMessages ToolsProfilesContactsSettingsCall LogRadioMessagesLocation3 Fine Tuning4 Set Frequency8XKid(Options when nochannel saved)(Options when somechannels saved)1Switch Off2 Speaker On/Off3StartRecord4Tuning5 Delete Channel6 Rename ChannelToolsGallery1Pictures2Musics3 Memory StatusToolsSupplementary1WAP2BREW
Installing the Battery Removing the Battery Make sure that your phone is powered off. Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. 2. Connect the charger to an alternating current (AC) power socket. 3. During the charging, the charging icon is displayed in the animated status. When the charging icon becomes static, the phone is fully charged. 4. Disconnect the charger from the AC power socket. 3
U1. e screen once to select an item tip onto the screen, and then move the 2. g the phone for the first time, adjust the phone ay reen in sequence according sing the Stylus A stylus can be used to click and drag: Click: Use the stylus tip to touch thor access a menu. Drag: Press the stylusstylus to select several characters. If you are usindisplay as follows: Choose Menu > Settings > Display settings > Displadjustment. Click the cross marks appear on the scto the prompts to finish adjusting the phone display. Using the Function Menu In the sta1. n ode, select Menu to display the Menu interface. em, and press dby m2. Press the navigation keys to scroll to a menu it (Select) or to display the menu, or click the ic y to display Do the following to display the suon directl3. bmenu: Press (Select) to scroll to a submenu item and press z or to z r key corresponding to the number of a submenu display the submenu. Press the numbeto display it. 4. Press (Back) tfunction menu. o return to the previous menu or quit the Alternatively, press to return to the home screen. Making a Call In the standby mode, enter a phone number. 1. 4
z To make an international call, press "*" twice to enter the international long distance code of "+". Then enter the numbbe dialled, in the format of "countr5 er to y code + region code + phone nsion, press "*" three times to insert nu2. Press number". z To call mber with an extea nu"P" or press "*" four times to insert "T" between the phone ber and the extension. m to dial the number. 3. Press to end the call. Note z code to unlock , press When the phone is locked, enter the lock the phone first; otherwise, you can make only em ency calls or answer calls. ergz In the standby mode to view the call log. d press Select a record an to dial. z Select a contact from the phonebook and press to dial. Answering a Call ere is ncoming call, press When th an i , Answer, or to calanswer it; Press Silence once to mute the tone and twice to reject the l; Press to reject it. If the any key answerz function is enabled, press any key (except or ) to answer an incoming call. If the headset auto answer function is enabledz , and the headset is phone, the incoming call is answered on connected to the automatically. z If the headset is connected to the phone, you can press the button the headset cable to answer or end a call.
6 Phone Lock The phone lock protects your phone from unauthorized use. The default phone lock code is 000000. You can change it into any numeric string of 4 to 8 digits. If the phone lock is enabled, you need to enter the correct phcode when the phone is powered on. one lock PIN and PUK The personal identity number (PIN) protects your UIM card from unauthorized use. The PIN unlocking key (PUK) can unblock the are delivered with the UIM card. rovider. enter wrong PUKs for a specified number of times blocked PIN. Both PIN and PUK For details, contact your service pIf you enter wrong PINs for pecified number of times consecutively, th one asks you to enter the PUK code. If you a se phconsecutively, the UIM card is invalidated permanently. Contact yourservice provider for a new card. Locking the Keypad In the standby mode, click to lock the keypad. When the keis locked, ypad press to answer incoming calls or make emergency e ke tion on the phonecalls. When th yguard function is enabled, if there is no opera for a preset period, the keypad is locked automatically.
7 Changing the Text Input Modes e indicator of the current text input mode isTh displayed on the screen. Note z In editing mode, you caand handwriting input n switch between keypad input by clicking the icons. z In the editing mode, select Clear once to delete the letter on the left of the cursor. Press and hold Clear to delete all the letters at a time. Handwriting Text Input In handwri input mode, you can input Chinting ese and English the phone screen with a stylus. or number you need. characters and numbers by writing on 1. Write the character or number you want to input in the correct order of strokes. Then the candidate characters or numbers will be displayed in a certain zone on the screen. 2. Click to select the character Entering English (En) the "En" input mode, do the following to enter the English letterIn s: 2. 1. Press each desired key once corresponding to the sequence of theletters. Then the phone displays the commonly-used words according to the numeric sequence of key presses. Press to scroll to the desired word.
8 Entering English (Abc) In the "Abc" input mode, press a key labeled with the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. Ez z d ntering Numbers In the "123" input mode, press a key labeled with the desired number. In the "Abc" input mode, press a key continuously or press anhold it until the desired number appears on the screen. z In the "En" input mode, press a key and then press until the desired number appears on the screen.
9 Warnings and Precautions ectronic Device Elz Power off your phone near high-precision electronic devices. The phone maaffect the performance of these devices. y radio HoPayz rating room (OR), intensive care unit it (CCU). z Arnot takz z z z Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the wave affects the operation of this device. z Pacemaker manufacturers recommend that a minimum separation of 15cm be maintained between a mobile phone and a pace-maker to avoid potential interference with the pace-maker. To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. spital attention to the following points in hospitals or health care facilities: Do not take your phone into the ope(ICU), or coronary care unz Do not use your phone at places for medical treatment where phone use is prohibited. When using your phone near someone who is suffering from a heart disease, turn down the ring tone volume or vibration properly so that it does not affect the person. ea with Inflammables and Explosives In any area with inflammables and explosives, power off your phone and do e out, install or charge the battery, to avoid explosion and fire. Areas with inflammables and explosives include, but are not limited to: Gas station Area for storing fuels (such as the bunk under the deck of a ship) Device/Vehicle for transporting and storing fuels or chemical products z z Area with chemical substances and particles (such as: granule, dust, metal powder) in the air z Area with the sign of "Explosives" Area with the sign of "Power off bi-direction wireless equipment" z Area where it is generally suggested to stop the engine or a vehicle
10 z used with vehicle-mounted equipment with hands-free z g attery. In areas Stield, such as an induction cooker and a microwave oven. Otherwise, z explosion may occur. z pins near the earpiece. The earpiece t you when you are using the phone. Traffic Safety z Please observe local laws and regulations on phone use. Do not use your phone while driving to avoid traffic accident. z Secure the phone on its holder. Do not place the phone on the seat or other places where it can get loose in a sudden stop or collision. z Use the phone after the vehicle stops at a safe place. If your phone supports the hands-free function, or the phone can beearphones, or there is anyfunction, use them in emergency. Do not place the phone over the air bag or in the air bag outspread area. Otherwise, the phone may hurt you owing to the strong force when the air bainflates. z Observe the rules and regulations of airline companies. When boarding or approaching a plane, power off the phone and take out the bwhere phone use is prohibited, power off the phone. Otherwise, the radio signal of the phone may disturb the plane control signals. Power off your phone before boarding an aircraft. orage Environment Do not place magnetic storage mediaz such as magnetic cards and floppy disks near the phone. Radiation from the phone may erase the information stored on them. z Do not put your phone, battery, or other accessories in containers with strong magnetic fcircuit failure, fire, or explosion may occur. Do not leave your phone, battery, or charger in a very hot or cold place. Otherwise, malfunction of the products, fire, orz Keep the ambient temperature between 0℃ and 45 while the ℃battery is being charged. Keep the ambient temperature between –20℃ and 60 ℃for storing the battery. If the ambient temperature is too low (especially below 0 ) or too high, the capacity and life of the battery will be reduced.℃ Do not place sharp metal objects such as may attract these objects and hurz Do not subject your phone, battery, and charger to serious collision or shock. Otherwise, battery leakage, phone malfunction, overheat, fire, or explosion may occur. z Do not put your phone in the back pocket of your trousers or skirt, to avoid phone damage while seated.
ildren Safety 11 Chz or vapor. Do not touch the z z ay from your body, to avoid negative impact on your health es utdoors or when it is being may lt, one may interfere with nearby TV sets, radios and PCs. z electric shock or short-circuit of the battery or z her chemical agent (such as alcohol and benzene) to clean the phone and the charge. Otherwise, part z Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guidance. Do not allow children to put the battery in mouth, for electrolyte in the batteryis poisonous. z Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings. Operating Environment z The phone, battery, and charger are not water-resistant. Keep them dry. and charge from water Protect the phone, batteryphone with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur. Do not use the phone in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur. z Do not power on or off the phone when it is near your ears to avoid negative impact on your health. When carrying or using the phone, keep the antenna at least one inch (2.5 centimeters) awcaused by radio frequency leakage. z If you feel uncomfortable (such as falling sick or qualm) after playing gamon your phone for a long time, please go to see a doctor immediately. On a thunder stormy day, do not use your phone oz charged. z Do not touch the antenna when a call is going on. Touching the antennaaffect call quality and cause the phone to operate with more power. As a resuthe talk time and standby time are shortened. z The phz In accordance with international standards for radio frequency and radiation, use phone accessories approved by the manufacturer only. z While using the mobile phone, observe the local laws and regulations, and respect others' privacy and legal rights. Clearing and Maintenance Before you clean or maintain the phone, power off the phone and disconnect it from the charger. Otherwise, charger may occur. Do not use any chemical detergent, powder, or ot
damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet. 12 cause e a z ervice E of your packaging g. . osion may occur. z Do not scratch the shell of the phone. Otherwise, the shed coating mayskin allergy. Once it happens, stop using the phone at once and go to sedoctor. z Keep the plug dry when you clean it, to prevent fire. If the phone or any of its fittings does not work, turn to the local authorizz e service center for help. Do not dismantle the mobile phone or accessories. Only an authorized scenter is allowed to maintain the mobile phone. nvironment Protection z Please observe the local regulations regarding the disposalmaterials, exhausted battery and old phone and please promote their recyclinDo not dispose of exhausted battery or old phone in municipal waste or fireise, explOtherwz This HUAWEI device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. z : This symbol indicates that the equipment carry-ing this mark must NOT be thrown into general waste but should be collected separately and properly recy-cled under local regulations. Emergency Call You can use your phone for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the phone for essential communications. Battery Use the battery approved by the manufacturer only. Otherwise, explosion mayoccur. Do not z z d z ble the battery or solder the battery poles. Otherwise fluid leakage, overheat, fire, or explosion may occur. z dispose of the battery in fire. Otherwise, the battery may ignite or explode. Do not connect two poles of the battery with conductors such as cables, jewelries or any other metal material. Otherwise, the battery is short-circuiteand it may burn your body. Do not disassem
z If there is battery leakage, smoke, or strange smell, stop using the battery andkeep it away from open flame to avoid fire or explosion. Then turn to an authorized m13 t rub your eyes. Otherwise, your eyes go to see a doctor immediately. ou id ironment. Keep the power aintenance engineer for help. z If the battery fluid contacts your skin or cloth, wash with clean water immediately to avoid irritation to the skin. If the battery fluid gets intz o eyes, do nocan be hurt. Wash with clean water andz If there is battery deformation, color change or abnormal heating while ycharge or store the battery, take it out immediately and stop using it. Otherwise, battery leakage, overheat, explosion, or fire may occur. z When installing the battery, do not push the battery by force lest battery fluleak out or the battery crack. z Do not take out the battery when the phone is turned on. z If you do not use the battery for a long time, store it in normal temperature after charging. Charger z Use the charger approved by the phone manufacturer only. Any violation of this rule may result in fire or malfunction of the charger. z Do not short-circuit the charger. Short-circuiting the charger may cause fire ormalfunction of the charger. z If the power cord is damaged (for example, the lead is exposed or broken), or the plug becomes loose, stop using the cable at once. Otherwise, electric shock, short-circuit of the charger, or fire may occur. z Keep the charger dry. Once water or other liquid leaks into the charger, electrical leakage or other faults may occur. z Do not use the charger in a dusty and damp envcord away from any heating appliance. z Ensure the charger is properly plugged into the power socket properly when charging the battery. Improper insertion may result in electric shock, fire, or explosion. To unplug the charger, pull the plug off rather than tear the power cord. z Use the AC power supply defined in the specifications of the charger. An improper power voltage can cause fire or malfunction of the charger. z Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur.
z When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused. z Once the liquid such as water leaks into 14 the charger, remove the plug of the TS THE GOVERNMENT'S REQUIREMENTS FOR O RADIO FREQUENCY ELECTROMAGNETIC FIELD. d by scientific organizations, e.g. ICNIRP (International ent for the amount of hen using a mobile phone. The atory it y the government-adopted requirement for safe exposure. The tests erformed in positions and locations (that is, at the ear and worn on the body) equired by the FCC for each model. For body worn operation, this phone has tested and meets FCC RF exposure guidelines when the handset is tioned a minimum of 15 mm from the body with an accessory that contains etal part. Use of other accessories may not ensure compliance with FCC RF re gucharger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur. Certification Information (SAR) THIS DEVICE MEEEXPOSURE TYour mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields). Governments around the world have adopted comprehensive international safety guidelines, developeCommission on Non-Ionizing Radiation Protection) and IEEE (Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements. Specific Absorption Rate (SAR) is the unit of measuremradio frequency energy absorbed by the body wSAR value is determined at the highest certified power level in laborconditions, but the actual SAR level of the mobile phone while operating can be well below the value. This is because the mobile phone is designed to use the minimum power required to reach the network. All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, must be tested and certified to the FCC that it does not exceed the limit established bare pas rbeen posino mexposu idelines.
15 The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 0.870 W/kg, and when properly worn on the body is 0.947 W/kg. The SAR limit adopted by the CNIRP is 2.0W/kg over one gram of tissue. The value guarantees a safe distance to protect mobile phone users and the difference caused by measurement errors. Under different test requirements and frequency, the value varies. Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the condition that this device does not cause harmful interface. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment not expressly approved by HUAWEI may void the FCC authorization to operate this equipment. Version: V100R001C16_01 Part Number: 3101xxxx

Navigation menu