Huawei Technologies CP12 HSDPA USB Stick User Manual English

Huawei Technologies Co.,Ltd HSDPA USB Stick English

Contents

User Manual Part 1

HUAWEI E182E HSPA+ USB Slider Quick Start Thank you for choosing this USB Slider. With the USB Slider, you can access the Internet through wireless network at a high speed. Note: This manual describes the appearance, installation and removal of the USB Slider. For the operation of the management program, refer to the User Manual. Getting to Know Your USB Slider The following figure shows the appearance of the USB Slider. It is only for your reference. The actual product may differ. 15234 n USB Interface It connects the USB Slider to a computer. o Slider It reveals the USB connector p Indicator It indicates the status of the USB Slider.  Green, blinking (on for 100ms and off for 100ms; then on for 100ms and off for 2700ms), the USB Slider is powered on.  Green, blinking (on for 100ms and off for 2900ms), the USB Slider is registered to a GSM/GPRS/EDGE network. Blue, blinking (on for 100ms and off for 2900ms), the USB Slider is registered to a UMTS network.
 Green, on, the USB Slider is connected to a GPRS/EDGE network. ected to a HSPA+ network. ff Slot w er identity module/UMTS subscriber identity r Micro SD Card Slot card 1. der. card into the card slots. Make sure 3.  Blue, on, the USB Slider is connected to a WCDMA network. Cyan, on, the USB Slider is conn O , the USB Slider is removed. q SIM/USIM CardIt is here you insert the subscribmodule (SIM/USIM) card. It is where you insert the Micro Secure Digital Memory (SD)Getting Your USB Slider Ready Remove the back cover of the USB Sli2. Insert the USIM/SIM card and the micro SDthat the cards are properly inserted. Install the back cover of the USB Slider. Note: Do not remove the Micro SD card when it is being used. Removing the card during ice, and data stored val procedures rst, power on the computer. Then connect the USB Slider with the computer. interface of the laptop or desktop computer. an operation may damage the Micro SD card as well as the devon the card may be corrupted. Installation/Removal Guide On different operating systems (OSs), the installation and remomay differ. Follow the system prompts during operation. Connecting the USB Slider with a Computer Note: FiOtherwise, the USB Slider cannot be installed as normal. 1. Plug the USB Slider into the USB ew hardware and starts the 3. izard. r the USB Slider management 2. The OS automatically detects and recognises ninstallation wizard. Follow the prompts of the installation w4. After the program is installed, a shortcut icon foprogram is displayed on the desktop.
Starting the Management Program After the USB Slider is installed, the management program is launched automatically. Then every time the USB Slider is connected to the PC, the tomatically. ram and then remove the USB Slider directly. nagement Program 1. art Menu. Control Panel. SB Slider. Note: Before removing the management program, exit the management program. Version: V100R001_01 Part Number: 31010AEG management program is launched auYou can also double-click the shortcut icon on the desktop to launch the management program. Removing the USB Slider Exit the management progRemoving the MaClick St2. Click3. Click Add/Remove Program to remove the management program of the U

Navigation menu