Huawei Technologies DG8045 VDSL Home Gateway User Manual Safety Information

Download:
Mirror Download [FCC.gov]
Document ID	3534864
Application ID	wo7kKxMEAf1t++IQXW5oYg==
Document Description	Users Manual_Safety Information
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.06kB (188280 bits)
Date Submitted	2017-08-30 00:00:00
Date Available	2018-02-27 00:00:00
Creation Date	2017-08-11 15:08:05
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2017-08-11 15:08:25
Document Title	Users Manual_Safety Information
Document Creator	Acrobat PDFMaker 10.0 Word 版

Safety Information
This section contains important information about the operation of your device. It
also contains information about how to use the device safely. Read this
information carefully before using your device.
Electronic device
Do not use your device if using the device is prohibited. Do not use the device if
doing so causes danger or interference with other electronic devices.
Interference with medical equipment
 Follow rules and regulations set forth by hospitals and health care facilities. Do
not use your device where prohibited.
 Some wireless devices may affect the performance of hearing aids or
pacemakers. Consult your service provider for more information.
 Pacemaker manufacturers recommend that a minimum distance of 15 cm be
maintained between a device and a pacemaker to prevent potential
interference with the pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device in your front pocket.
Areas with flammables and explosives
 Do not use the device where flammables or explosives are stored (in a gas
station, oil depot, or chemical plant, for example). Using your device in these
environments increases the risk of explosion or fire. In addition, follow the
instructions indicated in text or symbols.
 Do not store or transport the device in containers with flammable liquids,
gases, or explosives.
Operating environment
 Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the
device in these environments may result in circuit malfunctions.
 Before connecting and disconnecting cables, stop using the device and
disconnect it from the power supply. Ensure that your hands are dry during
operation.
 Place the device on a stable surface.
 Keep the device away from electronic appliances that generate strong
magnetic or electric fields, such as a microwave oven or refrigerator.
 During thunderstorms, power off your device and remove all cables connected
to it to protect against lightning strikes.
 Do not use your device during thunderstorms to protect your device against
any danger caused by lightning.
 Ideal operating temperatures are 0°C to 40°C. Extreme heat or cold may
damage your device or accessories.
 Keep the device and accessories in a well-ventilated and cool area away from
direct sunlight. Do not enclose or cover your device with towels or other
objects. Do not place the device in a container with poor heat dissipation, such
as a box or bag.
 To protect your device or accessories from fire or electrical shock hazards,
avoid rain and moisture.
 Keep the device away from sources of heat and fire, such as a heater,
microwave oven, stove, water heater, radiator, or candle.
 Do not place any object, such as a candle or a water container, on the device.
If any foreign object or liquid enters the device, immediately stop using it,
power it off, and remove all cables connected to it. Then, contact an
authorized service center.
 Observe local laws and regulations, and respect the privacy and legal rights of
others.
 Do not block device openings. Reserve a minimum of 10 cm around the
device to dissipate heat.
 Stop using your device or applications for a while if the device is overheated. If
skin is exposed to an overheated device for an extended period, low
temperature burn symptoms, such as red spots and darker pigmentation, may
occur.
 Do not touch the device's antenna. Otherwise, communication quality may be
reduced.
 Do not allow children or pets to bite or suck the device or accessories. Doing
so may result in damage or explosion.
 The device should be installed and operated with a minimum distance of 20
cm between the radiator and your body.
 Keep the device in a place with good reception. The distance between the
device and other metal materials (such as metal brackets or metal doors and
windows) should be greater than 25 cm and the distance between the device
should be greater than 30 cm.
Child's safety
 Comply with all precautions with regard to child's safety. Letting children play
with the device or its accessories may be dangerous. The device includes
detachable parts that may present a choking hazard. Keep away from children.
 The device and its accessories are not intended for use by children. Children
should only use the device with adult supervision.
Accessories
 Using an unapproved or incompatible power adapter, charger or battery may
cause fire, explosion or other hazards.
 Choose only accessories approved for use with this model by the device
manufacturer. The use of any other types of accessories may void the
warranty, may violate local regulations and laws, and may be dangerous.
Please contact your retailer for information about the availability of approved
accessories in your area.
Power adapter safety
 The power plug is intended to serve as a disconnect device.
 For pluggable devices, the socket-outlet shall be installed near the devices
and shall be easily accessible.
 Unplug the power adapter from electrical outlets and the device when not in
use.
 Do not drop or cause an impact to the power adapter. If it is damaged, take it
to an authorized service center for inspection.
 If the power cable is damaged (for example, the cord is exposed or broken), or
the plug loosens, stop using it at once. Continued use may lead to electric
shocks, short circuits, or fire.
 Do not touch the power cord with wet hands or pull the power cord to
disconnect the power adapter.
 Do not touch the device or the power adapter with wet hands. Doing so may
lead to short circuits, malfunctions, or electric shocks.
 If your power adapter has been exposed to water, other liquids, or excessive
moisture, take it to an authorized service center for inspection.
 Ensure that the power adapter meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1/UL60950-1 and has been tested and approved
according to national or local standards.
 The described input voltage range should comply with the local power grid.
For example, the input voltage of the adapter is 200–240 V AC for European
Union; the input voltage of the adapter is 100–140 V AC for America.
Cleaning and maintenance
 During storage, transportation, and operation of the device, keep it dry and
protect it from collision.
 Keep the device and accessories dry. Do not attempt to dry it with an external
heat source, such as a microwave oven or hair dryer.
 Do not expose your device or accessories to extreme heat or cold. These
environments may interfere with proper function and may lead to fire or
explosion.
 Avoid collision, which may lead to device malfunctions, overheating, fire, or
explosion.
 If the device is not going to be used for an extended period of time, power it off,
and remove all cables connected to it.
 If anything unusual occurs (for example, if the device emits smoke or any
unusual sound or smell), immediately stop using it, power it off, remove all
cables connected to it, and contact an authorized service center.
 Do not trample, pull, or excessively bend any cable. Doing so may damage the
cable, causing the device to malfunction.
 Before you clean or maintain the device, stop using it, stop all applications,
and disconnect all cables connected to it.
 Do not use any chemical detergent, powder, or other chemical agents (such as
alcohol and benzene) to clean the device or accessories. These substances
may cause damage to parts or present a fire hazard. Use a clean, soft, and dry
cloth to clean the device and accessories.
 Do not place magnetic stripe cards, such as credit cards and phone cards,
near the device for extended periods of time. Otherwise the magnetic stripe
cards may be damaged.
 Do not dismantle or remanufacture the device and its accessories. This voids
the warranty and releases the manufacturer from liability for damage. In case
of damage, contact an authorized service center for assistance or repair.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery,
literature or packaging reminds you that all electronic products and
batteries must be taken to separate waste collection points at the end
of their working lives; they must not be disposed of in the normal
waste stream with household garbage. It is the responsibility of the
user to dispose of the equipment using a designated collection point or service
for separate recycling of waste electrical and electronic equipment (WEEE) and
batteries according to local laws.
96724719_01
Proper collection and recycling of your equipment helps ensure electrical and
electronic equipment (EEE) waste is recycled in a manner that conserves
valuable materials and protects human health and the environment, improper
handling, accidental breakage, damage, and/or improper recycling at the end of
its life may be harmful for health and environment. For more information about
where and how to drop off your EEE waste, please contact your local authorities,
retailer or household waste disposal service or visit the website
www.huawei.com/en/product-certification.
Reduction of hazardous substances
This device and any electrical accessories are compliant with local applicable
rules on the restriction of the use of certain hazardous substances in electrical
and electronic equipment, such as EU REACH, RoHS and Batteries (where
included) regulations, etc. For declarations of conformity about REACH and
RoHS, please visit our web site www.huawei.com/en/product-certification.
FCC Regulatory Compliance
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provide with antenna installation instructions and
consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
FCC - PART 68
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the back of this equipment is a label that contains,
among other information, a product identifier in the format
US: HAUDL01ADG8045. If requested, this number must be provided to the
telephone company.
This equipment uses the following USOC jacks: RJ-11, RJ-45.
REN (RINGER EQUIVALENT NUMBERS) STATEMENT
Notice: The Ringer Equivalence Number (REN: 0.1 A) assigned to each terminal
device provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5.
ATTACHMENT LIMITATIONS STATEMENT
Notice: This equipment meets telecommunications network protective,
operational and safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document(s). This is confirmed by marking
the equipment with the Industry Canada certification number. The Department
does not guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. The
customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together.
This precaution may be particularly important in rural areas. Caution: Users
should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
Copyright © Huawei Technologies Co., Ltd. 2017. All rights
reserved.
No part of this manual may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd. and its
affiliates ("Huawei").
The product described in this manual may include copyrighted software of
Huawei and possible licensors. Customers shall not in any manner reproduce,
distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer,
lease, assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by respective
copyright holders.
Trademarks and Permissions
, and
Huawei Technologies Co., Ltd.
are trademarks or registered trademarks of
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi
Alliance.
Other trademarks, product, service and company names mentioned may be the
property of their respective owners.
Notice
Some features of the product and its accessories described herein rely on the
software installed, capacities and settings of local network, and therefore may not
be activated or may be limited by local network operators or network service
providers.
Thus, the descriptions herein may not exactly match the product or its
accessories which you purchase.
Huawei reserves the right to change or modify any information or specifications
contained in this manual without prior notice and without any liability.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS
REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO
EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS,
BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED
SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE
OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO
LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW
PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF
THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE
AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations
and be responsible to obtain all necessary governmental permits and licenses in
order to export, re-export or import the product mentioned in this manual
including the software and technical data therein.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2017:08:11 15:08:25+08:00
Create Date                     : 2017:08:11 15:08:05+08:00
Metadata Date                   : 2017:08:11 15:08:25+08:00
Creator Tool                    : Acrobat PDFMaker 10.0 Word 版
Document ID                     : uuid:f1a3afcf-78e4-41c6-871c-a8953851950d
Instance ID                     : uuid:c7381f79-2ce6-404e-8b12-6515b603ea08
Format                          : application/pdf
Title                           : 
Creator                         : 
Producer                        : Adobe PDF Library 10.0
Page Layout                     : OneColumn
Page Count                      : 8
Author                          : 

EXIF Metadata provided by EXIF.tools