Huawei Technologies E156C HSDPA USB Stick User Manual 31019601 V100R001 01 E156C QSG English

Huawei Technologies Co.,Ltd HSDPA USB Stick 31019601 V100R001 01 E156C QSG English

Manual

 Copyright © 2008 Huawei Technologie s Co., Ltd.  All Rights Reserv ed No part of t his docum ent may be reproduced or tr ansmit t ed in any form or by any m eans without prior written consent  of Huawei Technologies Co., Ltd.  Trademarks and Permissions  and other Huawei tradem arks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade nam es m ent ioned in t his document are the property of their respective holders.  Notice The informat ion in this document is subject to change wit hout  notice. Every effort  has been made in the preparation of t his document to ensure accuracy of the cont ent s, but all statem ents, informat ion, and recommendations in this document  do not constitute t he warranty  of any kind, express or implied.
i Table of Contents What Is in Your  Package........................................................................1 Getting to Know Your E156C...................................................................2 Preparat ion.........................................................................................5 Installation/Rem oval Guide.....................................................................7 Safety Informat ion.............................................................................10 Acronym s and Abbreviations.................................................................17
1 Thank you for choosing Huawei E156C HSDPA USB Stick (here inafter  refer red to as the  E156C). W ith the E156C, you can access th e Interne t through  wire less net w ork at a high speed. Not e :  This manual describes the appearance, installat ion and rem oval of t he E156C. For the operation of the management program, refer to the User Manual.  What Is in Your Pa ckage The package of your E156C contains the following item s:  n One E156C n One Quick  Star t  n One USB cable
2 Get t ing to Know Your E156C The following figur e shows t he appear ance of the E156C. It is only for your reference. The actual product may differ.  134265   USB Interface It connects the E156C to a computer.
3  SIM/USIM Card Slot  It is where you insert the subscriber identity m odule/UMTS subscriber identity module (SIM/ USIM) card.  Micro SD Card Slot  It is where you insert the Micro Secure Digit al Mem ory (SD) card  RF testing slot  It connects the RF test cables for RF testing.  Strap Hole  Indica t or It indicates the status of the E156C. Colour Status  Meaning Green Blinking (on for 100ms and off for 100ms;  then on for 100ms and off for 2700ms)  The E156C is powered on. Green Blinking (on for 100ms and off for 2900ms)  The E156C is registered to a GSM/GPRS/EDGE network. Blue  Blinking (on for 100ms and off for 2900ms)  The E156C is registered to a UMTS net work. Green On  The E156C is connected to a GPRS/EDGE net work. Blue  On  The E156C is connected to a WCDMA
4 net work. Cyan On  The E156C is connected to a HSDPA net work. -   Off  The E156C is rem oved.
5 Preparation Requirem e nts for the Computer To use t he E156C, the computer should m eet the following requirement s:  n USB Type A Receptacle, Compatible with USB 2. 0 High Speed. n Windows 2000 SP4, Windows XP SP2, Windows Vist a. n Your computer’s hardware system should m eet or exceed the recomm ended system  requirem ents for t he inst alled version of OS. n Resolution for the display:  800 × 600 or above. Get t ing Your E156C Ready 1.  Rem ove the USIM/SIM card slot from the E156C. 2.  Insert  the USIM/SIM card int o the card slot.  3.  Insert  the card slot int o t he E156C.
6 Inserting the Micro SD Card (Optional)  Insert the m icro SD card int o t he E156C, as shown in the following figure.    Not e :  Do not remove the micro SD card when it is being used. Removing t he card dur ing an operat ion m ay damage the m icro SD card as well as the device, and data stored on the card may be corrupted.
7 Installation/Removal Gu ide  On different operating systems ( OSs), the installation and removal procedures may differ. Follow the system prompts during operation. Connect ing the E156C with a Computer  Not e :  First, power on the computer. Then connect t he E156C with the comput er. Otherwise, t he E156C cannot be installed as normal.  1.  Plug the E156C int o the USB int erface of the laptop or desktop comput er .  You can connect the E156C to a laptop or desktop computer using the USB cable for better signals.
8  2.  The OS automatically  detects and recognises new hardware and starts the installation wizard. 3.  Follow t he prompts of t he inst allat ion wizard. 4.  After the program  is inst alled, a shortcut icon for the E156C managem ent  program is displayed on the desktop. St a rting the Managem ent Program  After the E156C is installed, the managem ent  program is launched automatically . Then every tim e the E156C is connected to the PC, the management progr am is launched aut omatically. You can also double- click  t he shortcut icon on the desktop to launch the management  program. Rem oving the E1 5 6C Rem ove the E156C directly. Rem oving the Managem e nt Pr ogram  1.  Click St art Menu. 2.  Click Control Panel. 3.  Click Add/ Rem ove Program  to remove the managem ent program  of the
9 E156C. Not e :  Before removing the managem ent program, exit the managem ent program.
10 Safety Inform ation Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference wit h electric devices. Medical Device n Do not use your wireless device and follow t he rules and regulat ions set forth by the hospitals and healt h care facilities. n Som e wireless devices may affect the performance of the hearing aids. For any such problem s, consult your service provider. n If you are using an elect ronic m edical device, consult the doctor or device manufacturer to confirm whether the radio wave affects the operation of t his device. Area with Inflammables and Explosives To prevent  explosions and fires in areas that are stored wit h inflammable and explosive devices, do not use your wireless device and observe t he rules. Areas stored with inflam m ables and explosives include but  are not limited to t he following:  n Gas stat ion n Fuel depot ( such as the bunk below the deck of a ship)  n Container/Vehicle for storing or transport ing fuels or chemical products
11 n Area where the air cont ains chemical substances and part icles ( such as granule, dust, or metal powder)  n Area indicated wit h the "Explosives" sign n Area indicated wit h the "Power off bi-direction wireless equipment" sign n Area where you are generally  suggested to stop the engine of a vehicle Traffic Security n Observe local laws and regulat ions while using t he wireless device. To prevent  accidents, do not use y our wireless device while driving. n RF signals m ay affect electronic system s of m otor vehicles. For m ore information, consult the v ehicle m anufacturer . n In a motor vehicle, do not place the wireless device over the air bag or in the air bag deploym ent area. Otherwise, the wireless device may hurt you owing to the st r ong force when the air bag inflat es. n Observe the rules and regulat ions of airline companies. When boarding, switch off your wireless device. Otherwise, the radio signal of the wireless device m ay int erfere wit h the plane control signals. Safety of Children  Do not allow children to use the wireless device wit hout guidance. Small and sharp components of the wireless device m ay cause danger to children or cause suffocation if children swallow the components. Environm e nt Pr otect ion Observe the local regulations regarding the disposal of your packaging materials, used wireless device and accessories, and promote their recycling.
12 WEEE Approval The wireless device is in compliance wit h the essential requirem ent s and ot her  relevant provisions of the Waste Electrical and Electronic Equipm ent Directive 2002/96/EC ( WEEE Directive). RoHS Approval The wireless device is in compliance wit h the restriction of the use of cert ain hazardous subst ances in elect rical and elect ronic equipm ent Directive 2002/95/EC (RoHS Directive).  Laws and Regula t ions Observance Observe laws and regulations when using your wireless device. Respect the privacy and legal right s of the others. Care and M aintenance It is normal that your wireless device gets hot when y ou use or charge it. Before you clean or maintain the wireless device, stop all applications and disconnect t he wireless device from  your PC. n Use your wireless device and accessories wit h care and in clean environment .  Keep the wireless device from a fire or a lit cigarette. n Protect your wireless device and accessories from  water and vapor and keep them  dry. n Do not drop, throw or bend your wireless device. n Clean your wireless device wit h a piece of damp and soft antist at ic clot h. Do not use any chemical agents (such as alcohol and benzene), chem ical detergent , or powder to clean it. n Do not leave your wireless device and accessories in a place wit h a
13 considerably low or high tem perature. n Use only accessories of the wireless device approved by the manufact ure.  Contact the authorized service cent er for any abnormity of the wireless device or accessories. n Do not dismantle t he wireless device or accessories. Otherwise, the wireless device and accessories are not covered by the warranty. Em ergency Call This wireless device functions thr ough receiving and transmitt ing radio signals. Therefore, the connection cannot be guaranteed in all conditions. In an em ergency, you should not rely solely  on the wireless device for essent ial com m unications. Specific Absorption Ra t e (SAR)  Your wireless device is a radio t ransmitt er and receiver. It is designed not to exceed the limits for exposure to radio waves recomm ended by int ernational guidelines. These guidelines were developed by the independent scient ific organization ICNIRP and include safety margins designed to assure t he protection of all persons, regardless of age and healt h. Regula t ory Informa t ion The following approvals and notices apply in specific regions as noted. CE Approval ( European Union)  The wireless device is approved to be used in the m ember states of the EU. The wireless device is in compliance with the essent ial requirem ent s and ot her relevant provisions of the Radio and Telecommunications Terminal Equipm ent  Directive 1999/5/EC ( R&TTE Directive). In Europe, the SAR limit for m obile devices used by the public is 2.0 watt s/ kg
14 (W/ kg) averagedover 10 grams of tissue for the body or head (4.0 W/kg averaged over 10 grams of tissue for theextrem ities -  hands, wrists, ankles and feet). The standard incorporates a substant ial m argin ofsafety to give additional protection for the public and to account for any variations inmeasurements. the highest SAR value for this device when tested properly worn on the body is 1.080W/ kg. Federal Communications Com m ission Notice ( United States) : Before a wireless device m odel is available for sale to t he public, it m ust be tested and certified to the FCC that it does not exceed the limit est ablished by the government-adopted requirem ent for safe exposure. FCC Stat e ment In the United Stat es and Canada, the SAR limit for m obile devices used by the public is 1.6wat t s/ kg (W/ kg)  averaged over 1 gram of tissue for the body or head (4.0 W/kg averaged over10 grams of tissue for the ext r emities -  hands, wrists, ankles and feet). The standard incorpor at esa substant ial margin of safety to give additional protection for the public and to account for anyvariations in m easurem ents. The highest SAR value reported to t he FCC for this device type when tested properly  worn on the body is 1.16W/ kg. SAR compliance has been established in typical laptop computer( s) wit h USB slot, and product could be used wit h typical laptop computer. Other applicat ion like handheld PC or co-t ransmit t ing with other high power transmitter(s) wit hin 20cm  have not been v erified and may not comply wit h relevant RF exposure rules. Please consult manufacture( s)  before such use. The USB dongle transmit t er is approved for use in typical laptop comput ers.  To comply wit h FCC RF exposure requirem ents, it should not be used in other devices or certain laptop and tablet computer configurations where the USB connectors on the host comput er are unable to provide or ensure the necessary operating configurat ions int ended for t he device and its users or bystanders to sat isfy RF exposure compliance requirem ents. 15.19
15 NOTICE:  This device complies with Part  15 of the FCC Rules [and with RSS-210 of Indust r y Canada]. Operation is subject to the following two conditions:  (1) this device may not cause harmful int erference, and  (2)  t his device m ust accept any interference received, including int erference that  may cause undesired oper at ion. 15.21 NOTICE:  Changes or modificat ions m ade to this equipm ent not expressly approved by  (HUAWEI) may void the FCC authorizat ion to oper at e this equipm ent. 15.105 NOTE:  This equipment  has been tested and found to comply wit h the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential inst allat ion. This equipm ent generates, uses and can radiate radio frequency energy and, if not inst alled and used in accordance wit h the instr uctions, may cause harmful int erference to radio com m unicat ions.  However , t here is no guarantee that int erference will not occur in a particular inst allat ion. If t his equipm ent does cause harmful int erference to radio or television reception, which can be determined by turning the equipment  off and on, the user is encouraged to try to correct the int erference by one or m ore of t he following m easures:  • Reorient or relocat e the receiving ant enna. • Increase the separation between the equipment  and receiver. • Connect the equipm ent int o an outlet on a circuit different from that to which the
16 receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
17 Acronyms and Abbreviations EDGE  Enhanced Data Rates for GSM Evolut ion GPRS  General Packet Radio Service GSM  Global System  for Mobile Com m unications HSDPA  High Speed Downlink Packet Access OS  Operating System  PIN  Personal Identificat ion Number SAR  Specific Absorption Rate SIM  Subscriber Identity Module UMTS  Universal Mobile Telecom m unicat ions System  USB  Universal Serial Bus USIM  UMTS Subscriber Identity Module WCDMA  Wideband Code Division Multiple Access
18  Version:  V100R001_01  Part Number: 31019601

Navigation menu