Huawei Technologies E3276S-151 Mobile Cellular Device with GSM/GPRS/EDGE 850/1900, WCDMA/HSPA/DC-HSPA FDD II/IV, LTE FDD IV/VII User Manual English
Huawei Technologies Co.,Ltd Mobile Cellular Device with GSM/GPRS/EDGE 850/1900, WCDMA/HSPA/DC-HSPA FDD II/IV, LTE FDD IV/VII English
Contents
- 1. User Manual SI
- 2. User Manual SI (front Cover)
- 3. User Manual (Quick Start)
User Manual (Quick Start)
Thank you for choosing the Mobile Broadband USB Stick. With your USB Stick, you can access a wireless network at high speed. Note: This manual describes the appearance of the USB Stick, as well as the procedures for preparation, installation, and removal. For operation details about the management program, see the online help included in the management program. Getting to Know Your USB Stick The following figure shows the appearance of the USB Stick. It is provided only for your reference. The actual product may be different. Rotatable USB Connector It connects the USB Stick to a PC. Button Press the button to turn over the USB connector, as shown in the following figure. Indicator It indicates the status of the USB Stick. Green, blinking twice every 2s: The USB Stick is powered on. Green, blinking once every 0.2s: The software of the USB Stick is being upgraded. Green, blinking once every 2s: The USB Stick is registering with a 2G network. Blue, blinking once every 2s: The USB Stick is registering with a 3G/3G+ network. Cyan, blinking once every 2s: The USB Stick is registering with a LTE network. Green, solid: The USB Stick is connected to a 2G network. Blue, solid: The USB Stick is connected to a 3G network. Cyan, solid: The USB Stick is connected to a 3G+/LTE network. Off: The USB Stick is removed. SIM/USIM Card Slot It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM) card. microSD Card Slot It holds a microSD card. Getting Started Insta lling the SIM /USIM Card 1. Slide the cover off. 2. Insert the SIM/USIM card into the card slot. 3. Slide the cover back onto the USB Stick until it snaps into place. Insert ing th e m icroS D Card Insert the microSD card into the USB Stick, as shown in the following figure. Note: The microSD card is an optional accessory. If it is not provided in the package, you can buy one yourself. Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the SIM/USIM card slot and the microSD card is inserted according t o the direction as labeled on the microSD card slot. Do not remove the microSD or SIM/USIM card when the card is in use. Otherwise, the card as well as your USB Stick may get damaged and the data stored on the card may be corrupted. Installation/Removal Guide The procedure for installing the management program depends on the operating system (OS) installed on your PC. The following sections take Windows XP as an example. Connecting th e USB St ick to a P C Plug the USB Stick directly into the USB port of your PC, or via USB cable (optional accessories). Insta lling the USB S tick M a nagement P rogr am 1. Connect the USB Stick with the PC. 2. The OS automatically detects and recognizes the new hardware and starts the installation wizard. Note: If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run the program. 3. Follow the on-screen instructions of the installation wizard. 4. After the program is installed, a shortcut icon for the management program appears on the desktop. Start ing th e M anag em ent P rogra m After being installed, the management program starts automatically. Then every time the USB Stick is connected to the PC, the management program starts automatically. You can also double-click the shortcut icon on the desktop to start the management program. Remov ing the U SB Stick 1. Double-click in the notification area. Then the Unplug or Eject Hardware dialog box appears. 2. Select the corresponding hardware and then click Stop. 3. When the message "It is safe to remove the device" appears, remove the USB Stick. Uninsta lling the M a nagement P rogra m 1. Choose Start > Control Panel > Add or Remove Programs. 2. Find the management program and click Remove to uninstall the management program. Note: Exit the management program before uninstalling it. Version: V100R001_01 Part Number: 3101****
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : 3.1-701 Create Date : 2012:10:09 17:01:27Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2012:10:09 17:05:48+08:00 Metadata Date : 2012:10:09 17:05:48+08:00 Format : application/pdf Creator : l69146 Title : English Producer : Microsoft® Office Word 2007 Document ID : uuid:f01bc60d-a75b-4a5a-8327-103dfbb23c75 Instance ID : uuid:1148e6a7-af8e-4b1f-86f8-c3eb2c813423 Page Count : 3 Language : zh-CN Author : l69146EXIF Metadata provided by EXIF.tools