Huawei Technologies E5836 Wireless Modem User Manual

Huawei Technologies Co.,Ltd Wireless Modem

Contents

User manual

1 Thank you for choosing HUAWEI E5 Wireless Terminal (Hereinafter referred to as E5). Note: z The supported functions and actual appearance are subject to your product purchased. The following pictures are displayed for illustration purpose only. For details of your product selection, consult your service provider. z This guide briefly describes the function of the E5. For the operation of configuring the management parameters, see Help on the web management page. z The E5 can be used in a reasonable closed environment such as a handbag or laptop bag, however if there is a risk that the ambient temperature will increase when the E5 is processing data services for a long period, due to the E5 not being able to dissipate the heat effectively. If this happens and as a safety precaution the E5 will switch off automatically or disconnect. In the event of this happening please restart your E5 as usual to restart the connection.
2 21345687Get to Know Your E5 Appearance No. Item 1 Screen 2 Micro SD card slot 3 USB connector 4 Power On/Off 5 WiFi/WPS button 6 Dialing button 7 Strap hole 8 Battery_button z WiFi: Wireless Fidelity
3 z WPS: WiFi Protected Setup Screen No. Item 1 Signal strength 2 Network 3 z WiFi enabled z The number of connected devices 4 Internet connection 5 z New messages z The number of new messages 6 Battery power level 7 Roaming status 8 z M: Manual mode
4 No. Item z D: On Demand mode
5 Install the SIM Card and Battery Position the card at the card slot entrance, making sure it is facing the same way as shown in the diagram, with the notched corner at the top left. Then slide in.
6 How to Access the Internet with WiFi Note: By default, the management parameters are preset on the E5 according to the requirements from the service provider. You can follow the steps below to quickly access the Internet. For the details about how to set the management parameters, see the Help on the Web management page. Step1: Power on the E5 Step2: Establish the WiFi Connection Step3: Access the Internet 1. Power on the E5 Press and hold until the screen
7 becomes lightened; the E5 is powered on. Note: Press and hold until the screen is off; the E5 is powered off. 2. Establish the WiFi Connection (Take PC for Example) 1. Make sure that the WiFi is enabled. 2. Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: To set up a WiFi connection, the PC must be configured with the wireless network adapter. If the wireless network connection is displayed, the wireless network adapter is available. Otherwise, you should check your wireless network adapter. 3. Click View available Wireless
8 Networks to display the wireless network connection list. 4. Select the network connection that the SSID is the same as that of the E5, and then click . Note: z If the encryption parameter is set for the E5, the Wireless Network Connection dialog box is displayed and requires the network key and confirmation. z The SSID and key label is attached on the E5. Wait for a while. The wireless connection icon displays in the status area in the lower right corner of the screen. Then, your PC can connect to the E5.
9 3. Access the Internet After you establish the WiFi connection successfully, you can access the Internet using the following two modes. By default, the mode is On Demand. Mode Operations On Demand After the E5 is powered on, it can automatically connect to the Internet when data transmission is required. If data transmission is not performed over a period of time, the E5 automatically tears down the Internet connection. Manual Press and hold CONNECT, until is displayed on the screen, the connection is set up successfully. Then you can use the Internet service.
10 Mode Operations Press and hold CONNECT until is off, the connection is tore down. Note: You can also launch web management page to connect to or disconnect from the network following the prompts. Note: z You can launch the web management page to select the mode of accessing the Internet. z If the E5 accesses the roaming network, the E5 automatically tears down the established network connection. While in the roaming network, you can only press and hold CONNECT to establish or tear down the network connection. z The dialing button dose not work in the On Demand mode.
11 How to Access the Web Management Page 1. Make sure that the connection between the E5 and the WiFi device or computer is normal. 2. Start the Internet browser and enter http://192.168.1.1 in the address bar. 3. Enter the password, and then click Login. Note: The default password is admin.
12 Everyday Use Charging the Battery Note: If you have not used the battery for a long time, please recharge it first. Method 1: Using the charger Caution: z Use the compatible charger (5V, 650mA) delivered only by the manufacturer with this E5 model. Using charger of other device model, other manufacturers or vendors may invalidate any approval or warranty applicable to the E5, result in the non-operation of the E5, and cause danger. z Charger is an optional accessory. If the charger is not provided in the package, you can contact your service provider to buy one yourself. Method 2: Connecting to a PC for charging 1. Power off the E5.
13 2. Connect the E5 and PC with the compatible data cable. Saving Power mode If the E5 has not been carried out any operations for a while, the screen is off. If the E5 has not been accessed for 10 minutes by default, the E5 changes to the deep sleep state. z When the E5 is in the deep sleep state, you can press any key to activate the E5. Now the screen becomes lightened. z When the E5 is in the deep sleep state, the WiFi is automatically disabled. Enabling/Disabling the WiFi Press and hold until is displayed on the screen, the WiFi is enabled.
14 z Note: Press and hold until is off, the WiFi is disabled. Establishing the WPS Connection If the WiFi Clients connected with the E5 support the WPS, the E5 can automatically generate a network key without manually entering. The operation steps of WPS connection are as follows. 1. Power on the E5. 2. Start the Clients connected with the E5. 3. Enable the WPS of the E5. Note: After the WiFi is enabled, press and hold . When is off, and then is displayed on the screen, the WPS of the E5 is enabled. 4. Enable the WPS of the Clients. Note: For the WiFi operations of the Clients see the Clients’ user guide. Validating the PIN Code
15 When the PIN code protection is enabled, you need launch the Web Management Page and then click Connection to enter the correct PIN code following the page prompts. Both the PIN and PUK are delivered with the SIM card. For details, consult your service provider. For the operation of accessing the Web Management Page, see “ How to Access the Web Management Page ”. Multi-device Access The WiFi device or computer can be connected to the Internet through the E5. The actual connecting procedure depends on the operating system of the WiFi device or computer. Follow the prompts to perform the connecting operations.
16
17
18 Micro SD Card 1. Remove the rubber cap from the Micro SD card slot. Then insert the Micro SD card into the slot. 2. After inserting the Micro SD card completely, replace the rubber cap. Note: z Micro SD card is an optional accessory. If the Micro SD card is not provided in the package, you can buy one yourself. z To remove the Micro SD card, open the rubber cap and press the Micro SD card gently. Now the Micro SD card will pop up automatically. Then take it out. z Do not remove the card when it is being used. Removing the card during an operation may damage the card as well as the E5, and data stored on the card may be corrupted. Restoring the Factory Defaults
19 If you forget the changes of some parameters, you can choose to restore factory defaults and reconfigure the E5. Press and hold and CONNECT at the same time until the screen is off, you restore the factory defaults successfully. Note: After this operation, all personal configuration settings are deleted and all web-based management settings and parameters will be restored to their default values. Friendly Tips If you cannot use the E5 normally, you can try these following ways to solve: z See Help on the web management page. z Restart the E5. z Restore the factory defaults. z Contact your service provider.
20 Version: V100R001_01 Part Number: 31010CBT

Navigation menu