Huawei Technologies E583C-52 Wireless Modem User Manual English

Download:
Mirror Download [FCC.gov]
Document ID	1372234
Application ID	F+5YTO48W/IAzTUJetW06g==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.1kB (526294 bits)
Date Submitted	2010-11-08 00:00:00
Date Available	2011-02-08 00:00:00
Creation Date	2010-10-22 14:05:27
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-10-22 14:06:13
Document Title	English
Document Creator	PScript5.dll Version 5.2
Document Author:	z45031

Thank you for choosing the HUAWEI E583C Wireless
Modem (E5).
Supported functions and actual appearance depend on the specific models you
purchased. The following illustrations are provided for your reference only. For details
about the model you selected, consult your service provider.
This guide briefly describes the functions of the E5. For details about how to set
management parameters, see Help on the web management page.
If the E5 is placed in an environment with poor ventilation, it may overheat after
extended use. When the E5 overheats, it will switch off or disconnect from the
network automatically to protect itself. If this happens, place the E5 in a
well-ventilated location, then restart the E5.
Getting to Know Your E5
Packing List
The package should contain the following items. If any of the items are missing or
damaged, contact your local dealer immediately.
Quick Start Guide
Safety Information
Main unit
Battery
Data cable
Charger
Some accessories are optional and are not provided with the modem. To purchase any
optional accessories, contact your local dealer.
Connection Scenarios
A Wi-Fi device or computer can be connected to the Internet through the E5. The actual
connection procedure depends on the operating system of the Wi-Fi device or computer.
The connection scenarios illustrated here are for your reference.
Scenario 1: Multi-device access via Wi-Fi
Scenario 2: One-device access via USB
Game machine
Smart Phone
Laptop
Digital Camera
Scenario 3: Multi-device access via Wi-Fi and USB at the same time
Game machine
Smart Phone
Laptop
Digital Camera
Appearance
No.
Item
External antenna
interface
Power button
USB connector
WPS button
Screen
Note:
Wi-Fi: wireless fidelity
WPS: Wi-Fi protected setup
Screen
No.
Item
Signal strength
Network
Wi-Fi enabled
Number of devices connected
Internet connection
New messages
Number of new messages
Battery level
Roaming status
M: Manual mode
A: Auto mode
Before You Start
Installing the SIM Card and the Battery
Install the SIM card in the card slot. Be sure that the SIM card is facing in the right direction,
as shown in figure 2, and then slide the SIM card into the slot.
Installing the microSD Card
Note:
The microSD card is an optional accessory. If a microSD card
did not come with your modem, you may purchase one
yourself.
To remove the microSD card, press in the card gently.
The microSD card will pop out for removal.
Do not remove the microSD card when it is in use.
Doing so may damage the card and the E5, and data stored
on the card may be lost.
Charging the Battery
Note: If the battery has not been used for a long time, it must be charged first.
Method 1: Using the charger
Caution: Only use chargers (5V, 1A)
compatible with the E5 and provided by a
designated manufacturer. Use of an
incompatible charger or one from an
unknown manufacturer may cause the E5 to
malfunction, fail, or could even cause a fire.
Such use voids all warranties, whether
expressed or implied, on the product.
Method 2: Connecting to a PC for charging
Connect the E5 to a PC using a compatible data
cable.
Accessing the Internet via Wi-Fi Connection
Note: By default, management parameters are preset on the E5 according to the
requirements of the service provider. Follow the steps below to quickly access the Internet.
For the details about how to set management parameters, see Help on the Web
management page.
Step1: Power on the E5.
Step2: Establish a Wi-Fi Connection.
Step3: Access the Internet.
1. Power on the E5
Press and hold
until the screen lights up. The E5 is
powered on.
Note: Press and hold
to power off the E5.
2. Establish a Wi-Fi Connection (Take a computer with Windows XP operating
system as an example)
1.
2.
Make sure that the Wi-Fi is enabled.
Select Start > Control Panel > Network
Connections > Wireless Network Connection.
Note: To set up a Wi-Fi connection, the PC must have
a wireless network adapter installed. If Wireless
Network Connection is displayed, a wireless network
adapter is available. Otherwise, check to make sure
you have a wireless network adapter
installed.
3. Click View available wireless networks to
display a list of wireless networks
available.
4. Select a network that has the same SSID
as that of the E5, and then click
10
Note:
If the encryption parameter is already set for the E5, the Wireless Network Connection
dialog box is displayed. Enter the network key in the dialog box as shown below.
The SSID and key label are affixed to your E5, as illustrated below.
Wait until the wireless connection icon is displayed in the status area in the lower right
corner of the PC screen.
3. Access the Internet
After successfully establishing a Wi-Fi connection, access the Internet in either the Auto or
Manual mode. The default mode is Auto.
11
Mode
Operations
Auto
After the E5 is powered on, it will connect to the Internet
automatically if data transmission is required. If there is no data
transmission over a period of time, the E5 automatically terminates the
Internet connection.
Launch the web management page and follow the prompts to
connect to or disconnect from the network.
Manual
Note:
Launch the web management page to select the mode for accessing the Internet.
If you roam to a different network with the E5, it will automatically disconnect an
established network connection. If you need to access the Internet from the new
network, you must re-establish a network connection.
12
Accessing the Web Management Page
1. Make sure that the connection between the E5 and the client is a proper one.
2. Start the Internet browser and enter http://192.168.1.1 in the address bar.
3. Enter the password, and then click Login.
Note: The default password is admin.
Validating the PIN Code
If PIN code protection is enabled, log in to the web management page and follow the
prompts to enter the correct PIN code. Both PIN and PUK are delivered with the SIM card.
For details, consult your service provider.
Sharing Data Stored on the microSD card
After the microSD card is inserted, you can store data on the card or use the web
management page to share data stored on the card.
1. Insert the microSD card.
2. Access the web management page.
13
3.
Click SD Card to manage the data stored on the microSD card.
SMS
You can access the short message service (SMS) from the web management page.
1. Access the web management page.
2. Click SMS to view, create, reply, forward or send a message.
14
Daily Use
Power Saving Mode
If the E5 is idle for a period of time, the screen turns off.
If the E5 is using battery power and does not process data transmissions for 30 minutes, it
goes to deep sleep state and Wi-Fi is disabled.
When the E5 is in deep sleep state, press any key to enable Wi-Fi and light up the screen.
Establishing a WPS Connection
If a Wi-Fi client connected to the E5 supports the WPS function, the E5 can generate a
network key without manual input. To establish a WPS connection, perform the following
steps:
1. Power on the E5.
2. Start the client.
3. Enable the WPS function of the E5.
to
Note: After Wi-Fi is enabled, press and hold
enable the WPS function of the E5.
15
4. Enable the WPS function of the client.
Note: For client Wi-Fi operations, see the clients’ user guide.
Restoring Factory Defaults
If you forget the changes you have made to some
parameters, you may restore factory defaults and
reconfigure the E5.
To restore the factory defaults, press and hold
the RESET button until the screen turns off. All
factory default settings are successfully restored.
Note: Restoring factory defaults deletes all
personal configuration settings and restores all
web-based management settings and parameters to their
default values.
16
RESET
Tips
If you are experiencing difficulties using the E5, try the following:
See Help on the web management page.
Restart the E5.
Restore the factory defaults.
Contact your service provider.
17
Example 1: Wi-Fi Connection to Game Machine (Sony PSP)
1.
2.
Turn on the PSP WLAN switch.
Select Settings > Network Settings.
3.
Select Infrastructure Mode to connect to
your local Wi-Fi access point.
Select New Connection to specify an
easy to remember connection name
(such as MyE5).
Select Scan to detect all networks within
range. The access point list is displayed.
4.
5.
6.
Select the SSID the same way as you did
for the E5. First press the Ź button of your game machine to confirm the SSID and
then press it again to input the Wi-Fi key.
18
z
7.
8.
9.
SSID: The Wi-Fi name of the E5.
WEP: The Wi-Fi key of the E5.
The default SSID and key label are
affixed to the E5.
Press the Ź button of your game
machine to continue, and then press the
X button to save the settings.
Select Test Connection to check the
connection. If the test succeeds, you are
online.
Go to Internet Browser.
19
Example 2: Wi-Fi Connection to a Smart Phone (iPhone)
1.
2.
Select Settings > Wi-Fi, and then turn on Wi-Fi.
Automatically detect the networks in range and
display the access point list.
3. Select a network that the E5 is using.
4. If necessary, enter a password and tap Join.
(Networks requiring a password appear with a
lock icon.)
Note: Some Wi-Fi clients such as iTouch, PS3 and
NDS can also access the Internet via the E5. For
details, see the user guides of the Wi-Fi clients.
20
Frequently Asked Questions (FAQ)
What can I do if a client cannot access the Internet?
1.
2.
3.
4.
5.
6.
7.
Check that the client is properly connected to the E5.
Check power status to ensure that the E5 is powered on.
Check signal strength to ensure that the area is covered by the network.
Check that the network mode is correct. For details about network modes, see Mobile
Network Settings on the web management page.
You must configure the correct peer-peer protocol (PPP) user name and PPP password
when you access the Internet through the E5. Check whether the user name and the
password are correct. See Profile Management on the web management page for
details.
If the DHCP server is disabled and the client obtains an IP address dynamically, the
client cannot access the Internet either. In this case, change the access mode to
manually assign an IP address. See DHCP Settings on the web management page for
more information.
Check that the network adapter of your client operates properly.
21
8.
If the problem persists, please consult your service provider.
What can I do if a client cannot access the WLAN?
1.
2.
3.
If interference seems to be the problem, adjust the position of the E5 or move it to a
more favorable location.
Check and record the following settings for your client and your E5: SSID, WEP type,
and key. The SSID of the client must be set to ANY or to the same value as that of the
E5. The WEP type and key of the client must be the same as that of the E5. Change
the settings as needed.
Check whether the WLAN MAC Filter function is enabled on the E5. If the function is
enabled, ensure that all relevant parameters are set correctly. See WLAN MAC Filter on
the web management page for more information.
What can I do if I forgot the default IP address of the web management page?
1.
2.
If you have obtained an IP address automatically, enter http://e5.home and log in to
the web management page.
Restore the factory defaults.
Version: V100R001_02 Part Number: 31010CWV
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Sflag                           : 1278039242
Slevelui                        : 0
Slevel                          : 5
Company                         : Huawei Technologies Co., Ltd.
Source Modified                 : D:20100702033531
Create Date                     : 2010:10:22 14:05:27+08:00
Modify Date                     : 2010:10:22 14:06:13+08:00
Metadata Date                   : 2010:10:22 14:06:13+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:A8AEF02EA2DDDF11B67E9B57E4C00D78
Instance ID                     : uuid:d175b6e7-fbba-49ce-868f-feb783cf181f
Derived From Instance ID        : uuid:72ed045f-d646-4a1a-8d81-84a06f59e10a
Derived From Document ID        : uuid:60eef4f5-5299-45fd-a58b-4a8d8b5dd3aa
Derived From Version ID         : 
Format                          : application/pdf
Title                           : English
Creator                         : z45031
Subject                         : 
Headline                        : 
Page Count                      : 24
Author                          : z45031

EXIF Metadata provided by EXIF.tools