Huawei Technologies E630 HSDPA/WCDMA/EDGE/GPRS/GSM Data Card User Manual 08

Huawei Technologies Co.,Ltd HSDPA/WCDMA/EDGE/GPRS/GSM Data Card 08

Contents

08 User manual

Download: Huawei Technologies E630 HSDPA/WCDMA/EDGE/GPRS/GSM Data Card User Manual 08
Mirror Download [FCC.gov]Huawei Technologies E630 HSDPA/WCDMA/EDGE/GPRS/GSM Data Card User Manual 08
Document ID685400
Application IDiPKvIMRcxrr60qYnlwUHDg==
Document Description08 User manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.97kB (162165 bits)
Date Submitted2006-07-24 00:00:00
Date Available2006-07-24 00:00:00
Creation Date2006-06-23 17:50:16
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2006-07-10 10:33:26
Document TitleMicrosoft Word - 31016841-HUAWEI E630 Data Card Quick Start-_V100R001,V1.10_.doc
Document CreatorAcrobat PDFMaker 7.0 for Word

Copyright © 2006 Huawei Technologies Co., Ltd.
All Rights Reserved.
No part of this document may be reproduced or transmitted in
any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are the trademarks or
registered trademarks of Huawei Technologies Co., Ltd. in the
People’s Republic of China and certain other countries.
All other trademarks and trade names mentioned in this
document are the property of their respective holders.
Notice
The information in this document is subject to change without
notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not
constitute the warranty of any kind, express or implied.
Safety Precautions
Before using the wireless data card, please read the safety precautions carefully and also let your
children know these, so that you can use your wireless data card correctly and safely. For details, see
the section “Warnings and Precautions”.
Do not switch on your wireless data card when it is prohibited to use wireless device or
when the wireless data card may cause interference or danger.
Do not use your wireless data card while driving.
Follow any rules or regulations in hospitals and health care facilities. Switch off your
wireless data card near medical apparatus.
Switch off your wireless data card in aircraft. The wireless data card may cause
interference to control signals of the aircraft.
Switch off your wireless data card near high-precision electronic devices. The wireless
data card may affect the performance of these devices.
Do not attempt to disassemble your wireless data card or its accessories. Only the
qualified personnel is allowed to service or repair the wireless data card.
Do not place your wireless data card and its accessories in containers with strong
electromagnetic field.
Do not place magnetic storage media near your wireless data card. Radiation from the
wireless data card may erase the information stored on them.
Do not put your wireless data card in a high-temperature place or use it in a place with
flammable gas such as a gas station.
Keep your wireless data card and its accessories away from children. Do not allow
children to use your wireless data card without guidance.
Observe any laws or regulations on the use of wireless data cards. Respect others’
privacy and legal rights when using your wireless data card.
Table of Contents
What Is in Your Packet .................................................................................................................. 1
Getting to Know Your Data Card .................................................................................................. 1
Preparation..................................................................................................................................... 2
Install Guide .................................................................................................................................. 3
Safety Information......................................................................................................................... 4
Certification Information (SAR) ................................................................................................... 7
Welcome to Huawei 3G data card.
Note: This manual briefly introduces the
profile of Huawei 3G data card as well
as the preparation, install and uninstall
process. For the operation of the
management program, see Huawei 3G
Data Card Online Help.
What Is in Your Packet
The package of your Huawei 3G data card
contains the following items.
1.
y One Huawei 3G data card
PCMCIA Interface
It is used for connecting the data card to a
laptop.
y One Huawei 3G data card install CD
y One quick start
2.
Antenna Jack
It is used for connecting an external antenna.
Getting to Know Your Data
Card
3.
Indicator
It is used for indicating the status of the data
card.
This is the sketch picture for Huawei 3G data
card. The actual product may differ.
y When the data card is powered on, the
indicator is blinking in green. (The indicator
is on for 100 ms and off for 100 ms, and then
on for 100 ms and off for 2700 ms.)
y When the data card has registered to a GPRS
y CPU: 133 MHz Pentium or above. 500 MHz
(GSM/GPRS/EDGE) network, the indicator
is blinking in green. (The indicator is on for
100 ms and off for 2900 ms.)
When the data card has registered to a UMTS
(WCDMA/HSDPA) network, the indicator is
blinking in blue. (The indicator is on for 100
ms and off for 2900 ms.)
When the data card has been connected to a
GPRS network, the indicator is steady on in
green.
When the data card has been connected to a
WCDMA network, the indicator is steady on
in blue.
When the data card has been connected to a
HSDPA network, the indicator is steady on in
cyan.
When the data card is removed, the indicator
is off.
Pentium or above is recommended.
y Memory: 32 MB RAM or above. 128 MB or
above is recommended.
y Free space on the hard disk: 30 MB or above.
y Windows XP or Windows 2000 is installed.
y Resolution for the laptop screen: 800 × 600
or above. 1024 × 768 is recommended.
2. Getting Your Data Card
Ready
Insert the SIM/USIM card into the slot of the
data card with the golden contacts side facing
downwards and the cut corner directing
inwards. Follow the direction on the back of the
data card.
Preparation
1. Configuration
Requirements to the Laptop
To use the Huawei 3G data card, the following
configurations for the laptop are required.
y Equipped with Type Ⅱ PCMCIA slot and
supporting CARDBUS.
on the desktop.
Install Guide
2. Install the Hardware
Driver of the Data Card
Under different operating systems (OS:
Windows XP or Windows2000), the install
processes of the data card management
program may differ. If there is any difference,
follow the actual install prompts.
1)
Insert the data card with a SIM/USIM
card into the PCMCIA slot of a laptop.
2)
OS auto detects and recognizes new
hardware and starts the Installation
Shield Wizard.
Note: Make sure that the management program
of the data card has been installed before
you insert the data card into your laptop.
1. Install the Management
Program of the Data Card
1)
Insert the delivered CD of the data card
into the laptop driver.
2)
The install program will auto run. If the
program does not respond, run the
Setup.exe file in the CD driver path of
the laptop.
3. Starting the Management
Program of the Data Card
3)
The Please select a setup language
dialog box is displayed. Select the
desired language and then click OK.
1)
Double-click
on the desktop to
start the management program of the
data card.
4)
Follow the prompts of the install wizard.
2)
At the prompt, enter the PIN code if you
have enabled the PIN lock.
5)
After the program is installed, the
4.
Unloading the Data Card
shortcut icon
for Huawei 3G data
card management program is displayed
Note: Do not remove the data card directly
without the following procedures to
avoid harms to your laptop, even though
the OS is in the hibernate or standby
mode.
y Select Start > Programs > Huawei Data
Card > Uninstall to uninstall the data card
management program.
Safety Information
1)
Double-click
in the status area to
display the Unplug or Eject Hardware
prompt.
2)
Select and stop the hardware related to
the data card "NEC PCI to USB Open
Host Controller".
3)
When OS displays "It is safe to remove
the device", pull the data card out.
Read and follow these simple guidelines. Not
doing so may be dangerous or illegal.
General Recommendations
for Use
Always handle your data card with care and
keep it in a clean and dust-free place. Do not
expose your data card to open flames or lit
tobacco products.
5. Uninstalling the
Management Program of the
Data Card
y Always keep your data card dry.
y Do not drop, throw or try to bend your data
card.
To uninstall the management program of
Huawei 3G data card, three ways are available.
y Do not paint or scratch your data card.
y Select Start > Control Panel >
y Do not attempt to disassemble your data card.
Add/Remove Program to uninstall the
management program of Huawei 3G data
card.
y Insert the delivered CD of the data card into
the laptop CD driver and run the install
program of the Huawei 3G data card
management program. Select Uninstall
Huawei 3G Data Card to uninstall.
Doing so will void warranty. Only authorized
personnel are allowed to do so.
y This product requires a minimum distance of
2.5 cm from the body when in operation.
y Do not touch the antenna unnecessarily.
y Keep your data card in normal temperature.
Your data card can only operate between
-25ºC and maximum +70 ºC (-13 ºF to
+158ºF).
y Use approved accessories only. Do not
connect your data card to any incompatible
products.
Deactivate in Aircrafts
Obey Laws and Regulations
Deactivate at Hospitals
y Do not operate your data card where it may
Obey regulations or rules at hospitals.
Deactivate your data card near medical
equipment. Wireless devices can cause
interference to cardiac pacemakers, implanted
defibrillators or other medical equipment.
Deactivate your data card before boarding or in
any aircraft. Wireless devices can cause
interference in aircrafts.
be unsafe to do so or where you are required
not to do so.
y To deactivate your data card, close all
applications using the data card and remove
the data card from the card slot.
y Obey all local laws, regulations, rules, orders,
signs and notices while using the data card.
Signs about the use of mobile phones should
also be obeyed as referring to other wireless
equipment including data cards.
Deactivate near Hearing
Devices
Deactivate your data card near hearing devices.
People with hearing aids may experience
interfering noises near wireless devices.
Deactivate in Explosive Areas
Recommendations for
Children
Deactivate your data card where the air is
potentially explosive. It is rare, but your PC
could generate sparks.
Do NOT allow children to play with your data
card. They could hurt themselves or others, or
could accidentally damage the data card. Your
data card contains small parts with sharp edges
that may cause an injury or a choking hazard.
Deactivate in Blasting Areas
Deactivate your data card where blasting is in
progress. Remote-controlled RF devices are
often used at construction sites to set off
blasting.
Deactivate While Driving
Do not use the data card while driving.
discharge causes the device to reset. If the
software is not operational after an ESD, restart
the modem software application.
Immunity to Interference
Your data card is immune to interferences
caused by audible signals.
Agency/Regulatory
Information
Cleaning and Maintenance
y Before you clean or maintain the data card,
The data card is approved for use in many
regions of the world. In these regions, the
device meets all radio frequency exposure
requirements. The following approvals and
notices apply in specific regions as noted.
turn off your PC and remove your data card
from your PC.
y Clean your data card with a piece of soft
antistatic cloth.
y If the data card or any of its accessories does
not work, turn to an authorized service center
for help.
CE Approval (European
Union)
Environmental Protection
The data card is approved to be used in the
member states of the EU. Huawei declares that
the data card is in compliance with the essential
requirements and other relevant provisions of
the Radio and Telecommunications Terminal
Equipment Directive 1999/5/EC (R&TTE
Directive).
Observe the local regulations regarding the
disposal of your packaging materials, old data
card and its accessories. Please promote their
recycling.
SIM Cards
Radio Frequency Exposure
While inserting or removing the SIM card,
protect yourself against electrostatic discharge
(ESD). Do not touch the connector of the SIM
card. As a precaution, always make sure that
the data card is already in your hand before you
insert or remove the SIM card.
To ensure compliance at all times with the
R&TTE Directive* 1999/5/EC, the data card
can be held in the hand but still requires a
minimum distance of 1.5 cm from the body
when in operation. For body-worn use, it must
be suitably mounted so that it is at least 1.5 cm
away from the body. Mounting accessories (for
example, belt clips) cannot be made of metal.
Do not put the data card in your pocket.
Restart on ESDs
Software will attempt to re-initialize a
connection once a substantial electrostatic
ICNIRP (International Commission on
Non-Ionising Radiation Protection) and IEEE
(Institute of Electrical and Electronics
Engineers Inc.), through periodic and thorough
evaluation of scientific studies. These
guidelines establish permitted levels of radio
wave exposure for the public. The levels
include a safety margin designed to assure the
safety of all persons, regardless of age and
health, and to account for any variations in
measurements.
* The general public RF exposure limits
referenced in the R&TTE Directive are
consistent with the published Guidelines of the
International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998. ICNIRP
is a formally recognized non-governmental
organization in Non-Ionising Radiation
Protection for the World Health Organisation
(WHO), the International Labour Organisation
(ILO) and the European Union (EU). For more
information, visit the ICNIRP website at
www.icnirp.de.
Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency
energy absorbed by the body when using a
wireless data card. The SAR value is
determined at the highest certified power level
in laboratory conditions, but the actual SAR
level of the wireless data card while operating
can be well below the value. This is because the
data card is designed to use the minimum
power required to reach the network.
Certification Information
(SAR)
THIS DEVICE MEETS THE
GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO FREQUENCY
ELECTROMAGNETIC FIELD.
All models of Huawei’s data card are designed
to meet radio frequency exposure guidelines
such as European Council Recommendation
and Federal Communications Commission
Notice (United States).
Your data card is a low-power radio transmitter
and receiver. When it is running, it emits low
levels of radio frequency energy (also known as
radio waves or radio frequency fields).
European Council Recommendation: Before
a data card model is available for sale to the
public, it must be tested according to the
technical standard-EN 50361 and not exceed
the limit established by the European Council
Governments around the world have adopted
comprehensive international safety guidelines,
developed by scientific organizations, e.g.
Recommendation: 1999/519/EC for safe
exposure.
FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
The SAR limit adopted by the 1999/519/EC is
2.0 watts/kilogram (W/kg) averaged over ten
gram of tissue. The highest SAR value for this
device type when tested is 1.47 W/kg.
[EN 50361 scope states “This basic standard
applies to any electromagnetic field (EM)
transmitting devices intended to be used with
the radiating part of the equipment in close
proximity to the human ear including mobile
phones, cordless phones, etc. The frequency
range is 300 MHz to 3 GHz. Therefore, the
above text does not address primary use of the
data card product.]
Federal Communications Commission
Notice (United States): Before a data card
model is available for sale to the public, it must
be tested and certified to the FCC that it does
not exceed the limit established by the
government-adopted requirement for safe
exposure.
y Reorient or relocate the receiving antenna.
y Increase the separation between the
equipment and receiver.
y Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
y Consult the dealer or an experienced
radio/TV technician for help.
The SAR limit adopted by the USA and Canada
is 1.6 watts/kilogram (W/kg) averaged over one
gram of tissue. The highest SAR value reported
to the FCC and IC for this device type when
tested for use is 0.930 W/kg. [There is no
reference to the specific reference standard or
its applicability to the intended use of the
product]
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Warning: Changes or modifications made to
this equipment not expressly approved
by HUAWEI may void the FCC
authorization to operate this equipment.
FCC ID: QISE630
Version: V1.10 BOM: 31016841

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : (none)
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2006:07:10 10:33:26+08:00
Create Date                     : 2006:06:23 17:50:16+08:00
Metadata Date                   : 2006:07:10 10:33:26+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 31016841-HUAWEI E630 Data Card Quick Start-_V100R001,V1.10_.doc
Creator                         : 
Document ID                     : uuid:277d0cfd-bad5-4630-9a63-dad86f5c4c35
Instance ID                     : uuid:aaf4c8d3-42f4-4942-8f42-7208fa2d5a31
Page Count                      : 12
Page Layout                     : OneColumn
Author                          : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QISE630

Navigation menu