Huawei Technologies EA260-135 LTE CPE User Manual

Huawei Technologies Co.,Ltd LTE CPE Users Manual

Users Manual

Thank you for purchasing the CPE. This CPE brings you a high speed wireless network connection. This document will help you understand your CPE so you can start using it right away. Please read this document carefully before using your CPE. For detailed information about the funct ions and configurations of the CPE, refer to the online help on the web management page that comes with the CPE. Note: You must install Adobe Reader version 6.0 or higher to read the online help. Getting to Know Your CPE Note: The CPE function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary. Application Scenario The CPE can:  Provide Internet access for Wi-Fi devices and computers.  Connect to telephones for voice services.  Expand LAN coverage together with hubs and switches. Note:  During thunderstorms and rainy weather, turn off and disconnect the CPE.  When the CPE is in use, you can alter its position or orientation to improve signal reception.  Use a standard or authorized external antenna to avoid CPE malfunctions. Selecting the Installation Environment Obstacles such as concrete and wooden walls will affect the transmission of the network signal. It is recommended that when you install CPE you choose an open space. Keep the CPE away from equipment that generates strong magnetic and electric f ields, for instance microwaves, refrigerators, and satellite receivers. Appearance ○1 Power indicator  On: CPE turned on  Off: CPE turned off ○2 WLAN indicator  On: WLAN function enabled  Blinking: Transmitting data through WLAN  Off: WLAN function disabled ○3 WPS indicator  On: WPS function enabled  Blinking: WPS interconnect ion verification is in progress. This process should not take longer than 2 minutes.  Off: WPS function disabled ○4 TEL indicator  Off: On-hook condition  Blinking: Incoming call  On: Off-hook condition ○5 Mode indicator  Steady blue: The CPE is connected to an LTE network, but no data is being transmitted.  Blinking blue: The CPE is connected to an LTE network and is transmitting data.  Steady red: The CPE failed to connect to a wireless network.  Steady purple: The SIM card is not recognized, the PIN has not been entered, or the PIN verification failed. ○6 Signal indicator  On: Indicates network signal strength. Full light indicates strong signal.  Off: No network signal. ○7 USIM card slot Accommodate a USIM card. ○8 Power button Press this button to power the CPE on or off. ○9 Power port Connect to the CPE's power adapter. ○10 USB port Only for equipment maintenance. ○11 TEL port Connect to telephones (optional). ○12 LAN port Connect to computers, switches, or other network devices. ○13 LAN indicator  On: The port is connected to a device.  Blinking: Data is being transmitted through the port.  Off: No device is connected to the port. ○14 WPS button After the WPS function is enabled, press and hold this button for more than 0.5 seconds
to initiate WPS interconnection. ○15 Reset button Press and hold for more than 2 seconds to restore the CPE to its factory sett ings. Note: Restoring the default settings of the CPE will override all the previous sett ings. ○16 WLAN button Press and hold for more than 2 seconds to enable or disable the WLAN function. ○17 External antenna port Connect to an external antenna. Note: Do not power off the CPE during the upgrade. Otherwise, the CPE may be damaged. Getting Started Installing the USIM Card Install the USIM card according to the illustrat ion. Note:  When removing the USIM card, gently press the USIM card in, then release. The card will automat ically pop out.  Do not remove the USIM card when it is in use. Doing so will affect the performance of your CPE, and data stored on the USIM card may be lost. Connecting to a Power Adapter Install the power adapter according to the illustrat ion. Note:  Only use power adapters compatible with the CPE and provided by a designated manufacturer. Use of an incompatible power adapter or one from an unknown manufacturer may cause the CPE to malfunct ion, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.  The CPE's power adapter model is HW-120100XYW, HW-120200XYW, HKA01212010-XY or HKA02412020-XY. X and Y represent letters or numbers that vary by region. For details about the specific adapter model, contact an authorized dealer. Logging In to the Web Management Page The web-based configuration utility can be used for initial CPE installat ion, parameter configuration, and function management through the browser. The Windows 7 operat ing system and Internet Explorer 8.0 are used as an example. Ensure that the CPE is connected to the computer. Follow these steps to log in to the web management page: 1. Connect CPE cables. 2. Configure the computer's IP address so that the IP addresses of the computer and the CPE are in the same network segment. Note:  The CPE's default IP address is 192.168.1.1, the subnet mask is 255.255.255.0.  It is recommended that you use the automatically obtained IP addresses for the computer and domain name system (DNS) server. If you manually configure the computer IP address, you must set the DNS server IP address to the CPE's IP address. Otherwise, you will fail to log in to the web management page. 3. Open the browser, and enter https://192.168.1.1 in the address box. 4. Enter the user name and password to log in to the web management page. Note:  The default user name is admin.  The default password is 4GCPE@hw. LTE is a trademark of ETSI. Version: V100R001_01 Part Number: 31010TQJ
HUAWEI LTE CPE eA260-135 V100R001 Product Description Issue 01 Date 2015-03-16 HUAWEI TECHNOLOGIES CO., LTD.
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 2 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 3 Contents 1 Overview ........................................................................................................................................ 42 Application Scenarios ................................................................................................................ 63 Technical Specifications .............................................................................................................. 83.1.1 Hardware Specifications ..................................................................................................................... 83.1.2 Antenna Specifications ..................................................................................................................... 103.1.3 Software Specifications .................................................................................................................... 114 Services and Applications ....................................................................................................... 135 Adopted Standards ..................................................................................................................... 146 Packing List ................................................................................................................................. 157 Acronyms and Abbreviations ................................................................................................. 16
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 4 1 Overview Introduction The Huawei eA260-135 V100R001 CPEs are the Long Term Evolution (LTE) customer premises equipments (CPEs). As a wireless gateway, the eA260-135 can be deployed indoors to provide services such as data collection and video surveillance. The eA260-135 V100R001 CPEs support LTE Release 9. The eA260-135 provide the following functions: z Data service z Voice service(Optional) z Security service z Local and remote maintenance and management z Data routing Product Features The eA260-135's main features are as follows: z High speed experience UE Category 4 UL/DL time slot configuration 0(3:1), 1(2:2), 2(1:3) 5MHz, 10MHz, 15MHz，20MHz bandwidth z Flexible networking capabilities Provide high-speed routing capability. Comprehensive set of networking and IP protocols such as routing, DNS, DHCP server, DHCP relay, and NAT. z Voice over IP(Optional) Provide high quality voice services with SIP protocol via the telephony interface. z Wi-Fi support 802.11 b/g/n wireless interface z Routing support Routing behind MS z Flexible security services Support packet filtering firewall. Provide instant protection to block potential security risks and intrusion attempts. z Web-based Configuration
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 5 Built-in web based configuration supports local administration and management with User-friendly Web interface. z TR069-Based Device management Support the CPE WAN Management Protocol (CWMP) as specified in Broadband Forum TR-069 Amendment II. Support remote software installation, setting of configuration and status parameters. Warning z This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. z FCC Caution To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. z FCC Radiation Exposure Statement To comply with FCC RF exposure requirements in section 1.1307, a minimum separation distance of 20cm is required between the antenna and all public persons. Product Appearance Figure 1-1 shows the appearance of the eA260-135. Figure 1-1 eA260-135 appearance
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 6 2 Application Scenarios The eA260-135 are mainly intended to provide users with wireless broadband data access services for wISP market,. The eA260-135 provide LTE-TDD wireless routing and translating LTE wireless data into wired Ethernet data, and vice versa. The eA260-135 can simultaneously set up wireless connections with 32 Wi-Fi devices and establish a local area network (LAN) by connecting to concentrators and switches. Figure 2-1 eA260-135 connected to multiple devices
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 7 eA260 provide two telephone interface. You can connect a telephone to achieve the basic voice capabilities. Figure 2-2 eA260-135 connected to telephones
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 8 3 Technical Specifications 3.1.1 Hardware Specifications Table 3-1 lists the hardware specifications of the eA260-135. Table 3-1 Hardware specifications Item Description Technical standards WAN: LTE LAN: IEEE 802.3/802.3u WLAN: IEEE 802.11b/g/n Working bands LTE: z TDD: 3650-3700MHz WLAN: 2400–2483.5 MHz Memory 512 MB NAND Flash 256 MB Double Data Rate (DDR) Synchronous Dynamic Random Access Memory (SDRAM) External ports One power port Two telephone ports (RJ11) Four LAN ports (RJ45) One USB 2.0 slave port(for local maintenance only) One Universal Subscriber Identity Module (USIM) card port Two external antenna ports Buttons One power button One WLAN button One WPS button One reset button
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 9 Item Description LED indicators One power indicator One WLAN indicator One WPS indicator One telephone indicator One mode indicator One signal strength indicator Four LAN indicators Maximum transmit power LTE: Conform to Power Class 3 Definition WLAN 802.11b: 20 dBm 802.11g: 20 dBm 802.11n: 18 dBm Receiving sensitivity LTE: Confirm to 3GPP Requirements WLAN 802.11n: –64 dBm at 65 Mbit/s 802.11g: –65 dBm at 54 Mbit/s 802.11b: –76 dBm at 11 Mbit/s Power consumption < 12 W Power supply AC: 100–240 V DC: 12 V/2 A Dimensions (H x W x D) 176 mm × 190 mm × 35 mm (6.93 in. x 7.48 in. x 1.38 in.) Weight About 390 g (power adapter excluded) Temperature Working temperature: 0°C to +40°C Storage temperature: –20°C to +70°C Humidity 5%–95% RH
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 10 3.1.2 Antenna Specifications Built-in Antenna Table 3-2 Specifications of the LTE main antenna Item Description Frequency range 3650-3700 MHz Input impedance 50 Ω Standing wave ratio (SWR) < 3 Efficiency > 50% Gain 4 dBi Polarization type Linear polarization Table 3-3 Specifications of the WLAN antenna Item Description Frequency range 2400–2483.5 MHz Input impedance 50 Ω SWR < 3 Efficiency > 50% Gain < -3.0 dBi Polarization type Linear polarization External Antenna Table 3-4 Specifications of the LTE external antenna at 3400 MHz to 3800 MHz Item Description Frequency range 3650-3700 MHz Input impedance 50 Ω SWR < 3 Efficiency > 50% Gain (H-plane) 5.5 dBi Polarization type Linear polarization
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 11 3.1.3 Software Specifications Table 3-55 lists the software specifications of the eA260-135. Table 3-5 Software specifications Item Description Gateway Supports the default route, namely, the route with the IP address 0.0.0.0. Supports the Address Resolution Protocol (ARP). Supports the Internet Control Message Protocol (ICMP). Supports the domain name service (DNS). NAT Supports NAT and Network Address and Port Translation (NAPT), which complies with RFC2663, RFC3022, and RFC3027. DHCP server Enables and disables the DHCP server. Configures DHCP server address pools. Sets the lease time. Supports DHCP relay Displays the status of the DHCP server address pools, including host names, Media Access Control (MAC) addresses, IP addresses, and remaining lease time. Routing behind MS Supports routing behind MS Firewall Enables and disables the firewall. Filters LAN MAC addresses. Filters LAN IP addresses. Filters URLs. Supports port forwarding. Supports demilitarized zone (DMZ). Supports Application Level Gateway (ALG) settings. LAN Supports 10/100 Mbit/s autonegotiation. Supports auto MDI/MDIX. MDI stands for Medium Dependent Interface, and MDIX stands for Medium Dependent Interface Crossover. Complies with IEEE 802.3 and IEEE 802.3u. VOIP Supports G.729, G.711a and G.711u
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 12 Item Description Supports SIP (RFC3261) Supports SDP (RFC2327) Supports DNS Supports DTMF Supports SIP ALG Upgrade Supports TR-069 upgrade and local upgrade. SIM Supports PIN management and SIM card authentication Dial-up connection Supports automatic and manual connection Importing and exporting configuration Encrypt and back up the current configuration, and then restore from a backup configuration WLAN Broadcasts and hides service set identifiers (SSIDs). Complies with IEEE 802.11b/g/n. Supports WPS. Authentication Supports OpenSystem authentication. Supports encryption using wired equivalent privacy (WEP), Wi-Fi protected access preshared key (WPA-PSK), and WPA2-PSK keys. Supports the Advanced Encryption Standard (AES) encryption algorithm. Supports the TKIP and AES hybrid encryption algorithm. MAC address authenticationSupports the MAC address authentication whitelist. Supports the MAC address authentication blacklist. Supports a maximum of 16 MAC address entries. Supports automatic transmission rate adjustment. Station management Supports station status queries. Supports a maximum of 32 connected stations.
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 13 4 Services and Applications Data Services By connecting to the eA260-135 over a wireless or wired network, users can get access to high-speed Internet services. Voice Services The eA260-135 provides two telephone ports to which users can connect telephones to implement basic voice functions and supplement voice functions. Security Services The eA260-135 offers security features, such as network firewalls, user authentication, and personal identification number (PIN) protection, to protect users from network security threats. Firewall The eA260-135 has the following firewall functions: z Firewall switch: Enable and disable the firewall. z LAN MAC address filtering: Prevent specified MAC addresses on a LAN from accessing the network. z LAN IP address filtering: Prevent specified IP addresses on a LAN from accessing the network. z URL filtering: Prevent computers on a LAN from visiting specified URLs. Local Management and Maintenance The eA260-135 supports local configuration to manage devices, configure network parameters, and help ensure that the device functions properly and stably. Remote management and maintenance The eA260-135 allows users to remotely manage connected device by TR069 as well as WebUI.
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 14 5 Adopted Standards Communication Protocols Table 5-1 lists the standards and communication protocols supported by the eA260-135. Table 5-1 eA260-135 standards and communication protocols Item Description Physical layer RFC894 ARP RFC826 IP RFC791, RFC1122, RFC1071, RFC1141, RFC1624, RFC792, RFC950, RFC1256 ICMP RFC792, RFC950, RFC1256 TCP RFC793 UDP RFC768 DHCP RFC1531, RFC1533 NAT RFC1631 Wireless Port The eA260-135 wireless Uu port complies with LTE R9.
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 15 6 Packing List Table 6-1 lists the items included with the eA260-135. Table 6-1 Items in the eA260-135 package Item Quantity Remarks LTE CPE 1 Mandatory Power adapter 1 Mandatory Quick Start 1 Mandatory Safety Information 1 Mandatory External antenna 2 Mandatory Ethernet cable 1 Optional
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 16 7 Acronyms and Abbreviations Numerics A AC Alternating Current AES Advanced Encryption Standard ALG Application Level Gateway ARP Address Resolution Protocol AP Access Point APN Access Point Name C CPE Customer-Premises Equipment D DDR Double Data Rate DHCP Dynamic Host Configuration Protocol DL Down Link DMZ demilitarized zone DNS domain name service I ICMP Internet Control Message Protocol IP Internet Protocol L LAN Local Area Network LED Light Emitting Diode LTE Long Term Evolution M
HUAWEI LTE CPE eA260-135 V100R001Product Description Issue 01 (2015-03-16) Commercial in Confidence 17 MAC Media Access Control MDI Medium Dependent Interface MDIX Medium Dependent Interface Crossover N NAPT Network Address and Port Translation NAT Network Address Translation P PIN Personal Identification Number S SDRAM Synchronous Dynamic Random Access Memory SSID service set identifier T TDD time division duplex TKIP Temporal Key Integrity Protocol U UL Up Link URL Uniform Resource Locator USB Universal Serial Bus USIM Universal Subscriber Identity Module W WAN Wide Area Network Wi-Fi Wireless Fidelity WLAN Wireless Local Area Network WPA-PSK Wi-Fi Protected Access Pre-shared Key WPS Wi-Fi Protected Setup
Regulatory Compliance Statement eA260-135 Issue : 01 Date: 2015-6-14 HUAWEI TECHNOLOGIES CO., LTD.
Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com
1 Regulatory Compliance Statement Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1-1 1 Regulatory Compliance Statement About This Chapter 1.1 Declaration of Conformity to European Directives 1.1 Declaration of Conformity to European Directives Figure 1-1 Declaration of Conformity to European Directives
1 Regulatory Compliance Statement 1-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue ()
2 Regulatory Compliance Information Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-3 2 Regulatory Compliance Information About This Chapter 2.1 Regulatory Compliance Standards 2.2 European Regulatory Compliance 2.3 U.S.A Regulatory Compliance 2.4 Canada Regulatory Compliance 2.5 CISPR 22 Compliance 2.6 China RoHS hazardous substance table 2.7 India RoHS hazardous substance table 2.8 Other Markets 2.1 Regulatory Compliance Standards This product complies with the standards listed in Table 2-1. Table 2-1 Regulatory compliance standards Discipline Standards EMC  CISPR22 Class B  CISPR24  EN55022 Class B  EN50024  ETSI EN 301 489 Class B  CFR 47 FCC Part 15 Class B  FCC Part 90z  ICES 003 Class B  AS/NZS CISPR22 Class B  GB9254 Class B  CNS 13438 Class B  IEC61000-3-2  IEC61000-3-3  EN61000-6-1  EN61000-6-3
2 Regulatory Compliance Information 2-4 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue () Discipline Standards Safety  IEC 60950-1  IEC60950-22  IEC/EN41003  EN 60950-1  UL 60950-1  CSA C22.2 No 60950-1  AS/NZS 60950.1  BS EN 60950-1  IS 13252  GB4943 RF  ETSI EN 301 908  ETSI EN 300 328 Telecom  FCC Part 68 (CFR 47) Health  ICNIRP Guideline  1999-519-EC  EN 50385  EN 62311  OET Bulletin 65  IEEE Std C95.1 Environmental protection  2011/65/EU (RoHS)  EC NO. 1907/2006 (REACH)  2002/96/EC (WEEE) Grounding  ITU-T K.27  ETSI EN 300 253
2 Regulatory Compliance Information Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-5 Discipline Standards NOTE EMC: electromagnetic compatibility NEBS: Network Equipment Build Standard RF: radio frequency CISPR: International Special Committee on Radio Interference EN: European Standard ETSI: European Telecommunications Standards Institute CFR: Code of Federal Regulations FCC: Federal Communication Commission IEC: International Electrotechnical Commission AS/NZS: Australian/New Zealand Standard VCCI: Voluntary Control Council for Interference CNS: Chinese National Standard UL: Underwriters Laboratories CSA: Canadian Standards Association BS: British Standard IS: Indian Standard GR: General Requirement FDA: Food and Drug Administration BTS: Base Transceiver Station GSM: Global System for Mobile communications WLAN: wireless local area network ICNIRP: International Commission on Non-Ionizing Radiation Protection OET: Office of Engineering Technology IEEE: Institute of Electrical and Electronics Engineers RoHS: restriction of the use of certain hazardous substances 2.2 European Regulatory Compliance This product complies with the following European directives and regulations.  2004/108/EC (EMC)  2006/95/EC (low voltage)  1999/5/EC (R&TTE)  2011/65/EU (RoHS)  EC NO. 1907/2006 (REACH)  2002/96/EC (WEEE) Product complies with Directive 2002/95/EC, 2011/65/EU and other similar regulations from the countries outside the European Union, on the RoHS in electrical and electronic equipment. The device does not contain lead, mercury, cadmium, and hexavalent chromium and brominated flame retardants (Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl Ethers (PBDE)) except for those exempted applications allowed by RoHS directive for technical reasons.
2 Regulatory Compliance Information 2-6 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue () Product complies with Regulation EC NO. 1907/2006 (REACH) and other similar regulations from the countries outside the European Union. Huawei will notify to the European Chemical Agency (ECHA) or the customer when necessary and regulation requires. Product complies with Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). Huawei is responsible for recycling its end-of-life devices, and please contact Huawei local service center when recycling is required. Huawei strictly complies with the EU Waste Electrical and Electronic Equipment Directive (WEEE Directive) and electronic waste management regulations enacted by different countries worldwide. In addition, Huawei has established a system for recycling and reuse of electronic wastes, and it can provide service of dismantling and recycling for WEEE. By Huawei recycling system, the waste can be handled environmentally and the resource can be recycled and reused fully, which is also Huawei WEEE stratagem in the word. Most of the materials in product are recyclable, and our packaging is designed to be recycled and should be handled in accordance with your local recycling policies. In accordance with Article 11(2) in Directive 2002/96/EC (WEEE), products were marked with the following symbol: a cross-out wheeled waste bin with a bar beneath as below: 2.3 U.S.A Regulatory Compliance 2.3.1 FCC Part 15 2.3.2 FCC Part 68 2.3.1 FCC Part 15 This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device does not cause harmful interference.  This device must accept any interference received, including interference that may cause undesired operation. If this device is modified without authorization from Huawei, the device may no longer comply with FCC requirements for Class B digital devices. In that a case, your right to use the device may be limited by FCC regulations. Moreover, you may be required to correct any interference to radio or television communications at your own expense.
2 Regulatory Compliance Information Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-7 This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and radiates radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user may take one or more of the following measures:  Reorient or relocate the receiving antenna.  Reinforce the separation between the device and receiver.  Connect the device into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio or TV technician for assistance. 2.3.2 FCC Part 68 Product complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council on Terminal Attachments (ACTA). On the enclosure of this device is a label that contains, among other information, a device identifier in the format US: HAUOTNANEA260 On request, this number must be provided to the telephone company. Table 2-3 lists the service order code (SOC), facility interface code (FIC) and Universal Service Order Code (USOC). Table 2-2 SOC, FIC and USOC information Interface Type SOC FIC Jack Type (USOC) FXS N/A METALLIC RJ11C Product that bears labeling identification number US: HAUITNANEA260 complies with:  FCC Rules and Regulations 47 CFR Part 68  TIA/EIA/IS-968, Technical Criteria for Terminal Device to Prevent Harms to the Telephone Network, July 2001, as adopted by the ACTA. A plug and jack used to connect this device to the premises wiring and telephone network must comply with the FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug are provided with this device. The plug is designed to connect to a compatible modular jack that is also compliant with the applicable FCC Part 68 rules and requirements. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The
2 Regulatory Compliance Information 2-8 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue () digits represented by ## are the REN without a decimal point. For earlier products, the REN is separately shown on the label. For this product the FCC Registration number is [US: HAUOTNANEA260] indicates the REN would be NA(in the case of equipment not connecting to circuits with analog ringing supplied then “NA” shall appear). If this device causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. In this case, you will be advised of your right to file a complaint with the FCC. The telephone company may make changes in its facilities, device, operations or procedures that could affect the operation of the device. If this happens, the telephone company will provide advance notice so that you make necessary modifications to maintain uninterrupted service. If this device causes any trouble, contact Futurewei Technologies,Inc. phone number +1 469-277-5852 for repairs or warranty information. If the device causes harm to the telephone network, the telephone company may request that you disconnect the device until the problem is resolved. Connection to party-line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm device connected to the telephone line, ensure the installation of this US: HAUITNANEA260does not disable your alarm device. For queries relating to disabling of alarm device, consult the telephone company or a qualified installer. 2.4 Canada Regulatory Compliance This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by Industrial Canada and meets the requirements for radiation exposure limits set forth for an uncontrolled environment. Cet appareil est conçu et fabriqué pour ne pas dépasser les limites d'émission pour l'exposition à la fréquence radio (RF) de l'énergie fixé par l'Industrielle Canada et répond aux exigences en matière de limites d'exposition aux rayonnements définies pour un environnement non contrôlé. In order to avoid the possibility of exceeding the Industrial Canada radio frequency exposure limits, human proximity to the device antenna shall not be less than 20 cm during normal operation; Afin d'éviter la possibilité de dépasser les limites d'exposition aux fréquences radio industrielle du Canada, la proximité humaine pour l'appareil antenne ne doit pas être inférieure à 20 cm au cours fonctionnement normal.;
2 Regulatory Compliance Information Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-9 2.5 CISPR 22 Compliance This product complies with CISPR 22 for Class B by the ITE. Class A ITE is a category of all other ITE that satisfies only the Class A ITE regulations, and not the Class B ITE regulations. Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use: 2.6 China RoHS hazardous substance table This products described in this guide complies with “the Administration on the Control of Pollution Caused by Electronic Information Products” which is also called China RoHS 部件名称 产品中有害物质或元素的名称及含量 镉 铅 汞 六价铬 多溴联苯 多溴联苯醚 Frame 〇 ╳ 〇 〇 〇 〇 Alloy Parts 〇 ╳ 〇 〇 〇 〇 Power Adapter 〇 ╳ 〇 〇 〇 〇 Metal Fittings 〇 〇 〇 〇 〇 〇 PCBA 〇 ╳ 〇 〇 〇 〇 Capacitor 〇 ╳ 〇 〇 〇 〇 Other electronics 〇 ╳ 〇 〇 〇 〇 Screen 〇 〇 〇 〇 〇 〇 Solder 〇 ╳ 〇 〇 〇 〇 Cable ╳ ╳ 〇 〇 〇 〇 Plastic and Polymer 〇 ╳ 〇 〇 〇 ╳ Label 〇 〇 〇 〇 〇 〇 Battery 〇 〇 〇 〇 〇 〇 〇：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下。 ╳：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求。
2 Regulatory Compliance Information 2-10 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue () 2.7 India RoHS hazardous substance table This products described in this guide complies with the “e-waste (Management and Handling) Rules, 2011”of India which is also called India RoHS. Part Descriptions Restricted Substances in Product Cd Pb Hg Cr(VI) PBBs PBDEs Frame 〇 ╳ 〇 〇 〇 〇 Alloy Parts 〇 ╳ 〇 〇 〇 〇 Power Adapter 〇 ╳ 〇 〇 〇 〇 Metal Fittings 〇 〇 〇 〇 〇 〇 PCBA 〇 ╳ 〇 〇 〇 〇 Capacitor 〇 ╳ 〇 〇 〇 〇 Other electronics 〇 ╳ 〇 〇 〇 〇 Screen 〇 〇 〇 〇 〇 〇 Solder 〇 ╳ 〇 〇 〇 〇 Cable ╳ ╳ 〇 〇 〇 〇 Plastic and Polymer 〇 ╳ 〇 〇 〇 ╳ Label 〇 〇 〇 〇 〇 〇 Battery 〇 〇 〇 〇 〇 〇 〇: indicates that the content of the toxic and hazardous substance in all the Homogeneous Materials of the part is below the concentration limit requirement as described in the e-waste (Management and Handling) Rules, 2011. ╳: indicates that the content of the toxic and hazardous substance in at least one Homogeneous Material of the part exceeds the concentration limit requirement as described in S in the e-waste (Management and Handling) Rules, 2011.
2 Regulatory Compliance Information Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-11 2.8 Other Markets For relevant compliance information/documentation for markets not mentioned above, Please contact Huawei representative

Navigation menu