Huawei Technologies EC1260 EVDO Rev.A USB Stick User Manual English

Huawei Technologies Co.,Ltd EVDO Rev.A USB Stick English

Contents

User Manual 2

HUAWEI EC189 EVDO Rev.A USB Stick Quick Start Thank you for choosing the Mobile Broadband USB Stick. With your USB Stick, you can access a wireless network at high speed. Note: This manual describes the appearance of the USB Stick, as well as the procedures for preparation, installation, and removal. For operation details about the management program, see the online help included in the management program. Getting to Know Your USB Stick The following figure shows the appearance of the USB Stick. It is provided only for your reference. The actual product may be different. 124536 n USB Connector It connects the USB Stick to a PC. o Indicator It indicates the status of the USB Stick. z Solid: The USB Stick is powered on. z Blinking once every 2s: The USB Stick is searching for a network or no network is found. z Blinking twice every 2s: The USB Stick finds a network. z Blinking once every 0.2s: The USB Stick has an ongoing call or data service. p MicroSD Card Slot It holds a microSD card. q UIM Card Slot It holds a User Identity Module (UIM) card. r Strap Hole You can tie a strap to the USB Stick through the strap hole. s Headset Jack It connects a headset to the USB Stick. Getting Your USB Stick Ready 1. Slide the back cover to remove it from the USB Stick. re. e. 2. Insert the UIM card and the microSD card into the corresponding card slots, as shown in the following figu3. Replace the back cover and slide it into plac
Note: z The microSD card is an optional accessory. If it is not provided in the package, you can buy one yourself. z Ensure that the beveled edge of the UIM card is properly aligned with that of the UIM card holder and the microSD card is inserted according to the direction as labeled on the microSD card slot. z Do not remove the microSD or UIM card when the card is in use. Otherwise, the card as well as your USB Stick may get damaged and the data stored on the card may be corrupted. Installation/Removal Guide The procedure for installing the management program depends on the operating system (OS) installed on your PC. The following sections take Windows XP as an example. Connecting the USB Stick to a PC Plug the USB Stick into the USB port of your PC. Installing the USB Stick Management Program 1. Connect the USB Stick with the PC. d d. nt 2. The OS automatically detects and recognizes the new hardware anstarts the installation wizard. Note: If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run the program. 3. Follow the on-screen instructions of the installation wizar4. After the program is installed, a shortcut icon for the managemeprogram appears on the desktop. Starting the Management Program After being installed, the management program starts automatically. Then every time the USB Stick is connected to the PC, the management program starts automatically. You can also double-click the shortcut icon on the desktop to start the management program. Removing the USB Stick 1. Double-click in the notification area. Then the Unplug or EjecHardware dialog box appears. t p. s, s. e 2. Select the corresponding hardware and then click Sto3. When the message "It is safe to remove the device" appearremove the USB Stick. Uninstalling the Management Program 1. Choose Start > Control Panel > Add or Remove Program2. Find the management program and click Remove to uninstall thmanagement program. Note: Exit the management program before uninstalling it. Version: V100R001_01 Part Number: 3101****

Navigation menu