Huawei Technologies EC360 CDMA Rev. A Data Card User Manual EC360

Huawei Technologies Co.,Ltd CDMA Rev. A Data Card Users Manual EC360

Contents

Users Manual I

Download: Huawei Technologies EC360 CDMA Rev. A Data Card User Manual EC360
Mirror Download [FCC.gov]Huawei Technologies EC360 CDMA Rev. A Data Card User Manual EC360
Document ID795075
Application ID7zIA32IfcPtmccn8akl8aw==
Document DescriptionUsers Manual I
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize124.88kB (1560964 bits)
Date Submitted2007-05-22 00:00:00
Date Available2007-05-22 00:00:00
Creation Date2007-05-22 13:44:39
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2007-05-22 13:44:55
Document TitleUsers Manual EC360.pdf
Document CreatorPScript5.dll Version 5.2
Document Author: Tanja Lorber

EC360 Quick Sta rt Jame.
Copyright © 2007 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks
Sb
nmw‘fl and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other
trademarks mentioned in this manual are the property of their respective
holders.
Notice
The information in this manual is subject to change Without notice. Every effort
has been made in the preparation of this manual to ensure accuracy of the
contents, but all statements, information, and recommendations in this manual
do not constitute the warranty of any kind, expressed or implied.
Table of Contents
Getting to Know Your Data Card
Preparation
Installation Guide
Warnings and Precautions
Technical Specifications
Thank you for purchasing Huawei EC360 EV-DO data card.
Huawei EC360 is a wireless network card based on the CDMAZOOO 1x and CDMAZOOO
leV-DO Rev. A protocols, which can enable you to communicate from your laptop on
CDMA networks at a high speed with all the benefits of CDMA technology.
The EC360 provides data transmission at up to 3.1 Mbit/s, and supports receiving
diverSIty.
Note: This manual briefs the profiles of Huawei EC360 EV—DO data card, including the preparation,
installation and uninstallation process.
Getting to Know Your Data Card
This is a sketch for Huawei EC36O EV-DO data card. The actual product may differ.
PCMCIA Interface
External Antenna
Indicator
External Antenna
It receives signals.
PCMCIA Interface
It connects the data card to a laptop.
Indicator
It indicates the status of the data card.
- When the data card is powered on, the indicator is steady on.
- When the data card has registered to a CDMA network with no service, the indicator
blinks once every 2 seconds.
0 When the data card has registered to an idle CDMA network, the indicator blinks twice
every 2 seconds.
- When the data card is engaged in a call or a data service, the indicator blinks once
every 0.2 second.
- When the data card is removed, powered down, or reset, the indicator is off.
Preparation
To use Huawei EC360 EV-DO data card, the following configurations for the laptop are
required.
- Equipped with Type II PCMCIA slot and supporting CARDBUS.
- CPU: 133 MHz Pentium or above. 500 MHz Pentium or above is recommended.
0 Memory: 32 MB RAM or above. 128 MB or above is recommended.
- Free space on the hard disk: ‘IOO MB or above.
- Windows XP, Windows 2000 or Window Vista is installed.
- Resolution for the laptop screen: 800 x 600 or above. 1024 x 768 is recommended.
Installation Guide
The procedure for installing the data card program is subject to the operating system
installed on your laptop. The followmg section takes Windows XP as an example.
Note: Make sure that the management program of the data card has been installed before you insert
the data card into your laptop.
Installing the Management Program
1. Insert the supplied CD of the data card into the CD-ROM drive of the laptop.
2. The installation program will run automatically. If the program does not respond, run
the Setup.exe file in the CD drive path of the laptop.
3. Select a setup language and then click OK.
4. Follow the prompts of the installation wizard.
5. After the program is installed, the shortcut icon for the data card
management program is displayed on the desktoe
,.
Installing the Hardware Driver
1. Insert the data card into the PCMCIA slot of the laptop.
2. The operating system (05) detects and recognizes new hardware automatically and
starts the Installation Shield Wizard.
Starting the Management Program
Double—click Q on the desktop to start the management program of the data card.
Removing the Data Card
Follow these steps strictly to remove the data card from your laptop. Otherwise, your
system may be damaged, even if it is in the standby mode.
Note: Before removrng the Data Card, you need to log out of the management program first,
1. Double-click & in the system tray, and then the Unplug or Eject Hardware
prompt is displayed.
2. Select and stop the hardware related to the data card "Standard PCI to USB Open
Host Controller".
3, When the OS displays "It is safe to remove the device", remove the data card from
the interface.
Uninstalling the Management Program
To uninstall the management program of the data card, follow any of the three ways:
0 Select Start > Control Panel > Add/Remove Program.
0 Insert the supplied CD into the CD-ROM drive of the laptop and run the installation
program. Then, select Uninstall.
' Select Start > Programs > Huawei Data Card > Uninstall.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a137d1d1-ff57-4cf2-90f6-fa68746ea72f
Modify Date                     : 2007:05:22 13:44:55+02:00
Create Date                     : 2007:05:22 13:44:39+02:00
Metadata Date                   : 2007:05:22 13:44:55+02:00
Document ID                     : uuid:b5c093db-cd02-4b90-8206-bbc4f86cdc8e
Format                          : application/pdf
Title                           : Users Manual EC360.pdf
Creator                         : PScript5.dll Version 5.2
Author                          : Tanja Lorber
Producer                        : Acrobat Distiller 6.0 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QISEC360

Navigation menu