Huawei Technologies EC5805 CDMA/EVDO Wireless Modem User Manual English

Huawei Technologies Co.,Ltd CDMA/EVDO Wireless Modem English

Contents

User manual 1of 2

Thank you for choosing HUAWEI EC5805 Wireless Modem (hereinafter referred to as the EC5805). z The supported functions and actual appearance are subject to your product purchased. The following pictures are provided for illustration only. For details about your product selection, consult your service provider. z This guide briefly describes the functions of the EC5805. For details about how to set the management parameters, see the Help on the web management page. z If the EC5805 is placed in an environment with poor ventilation, it will get heated after used for a long time. When the EC5805 gets heated to a certain extent, it will switch off or disconnect from the network automatically to protect itself. In this case, please expose the EC5805 in a well-ventilated place for heat dissipation and then restart the EC5805.
Getting to Know Your EC5805 Packing List The package box contains the following items. If any of the items is lost or damaged, contact your local dealer. Quick Start Safety Information Main unit Battery Data cable Some of the optional accessories are not provided in the package, you can contact 1
2 your local dealer to buy them yourself.
Application Scenarios The Wi-Fi device or computer can be connected to the Internet through the EC5805. The actual connecting procedure depends on the operating system of the Wi-Fi device or computer. You can perform the connection operations as prompted. Scenario 1: Multi-device access via Wi-Fi Smart phone Game machineDigital cameraLaptop Scenario 2: One-device access via USB 3
Scenario 3: Multi-device access via Wi-Fi and USB at the same time Smart phone Game machineDigital cameraLaptop Appearance 4
No. Item No. Item 1 Wi-Fi/WPS indicator 5 Signal indicator 2 Wi-Fi/WPS button 6 USB connector 3 Power button 7 External antenna interface 4 Power indicator Indicat Sor tatus 5
6 Indicator Status Wi-Fi/WPS z z Con : z Off: The Wi-Fi and WPSare disabled. tinuously on in greenThe Wi-Fi is enabled. Blinking in green: The WPS is enabled. Pz batlowimmthez nThe battery poz bat . ower Blinking in red: The tery power level is very and must be charged ediately; otherwise EC5805 will be powered off. Co tinuously on in red: wer level is weak. Blinking in green: The tery is being charged z n: s enoContinuously on in greeThe battery power level iugh. Sz exisnot inexignal Continuously on in red: The UIM card does not t or the PIN code is verified or the signal is istent.
Indicator Status z Thez Thez dialz dial ing Continuously on in green: EC5805 is in the normal state. Continuously on in blue: EC5805 is in the roaming state. Fast blinking in green: ing up in the normal state. Fast blinking in blue: ing up in the roamstate. z Wi-Fi: Wireless Fidelity z WPS: Wi-Fi Protected Setup Before You Start Installing the Battery Install the battery as shown in the following gure. fi 7
123 Installing the microSD Card 1. Remove the rubber cap from the microSD card slot. Then insert the microSD card into the slot. After inserting the microSD card 2. tz z completely, attach the rubber cap. No e: The microSD card is an optional accessory. If the microSD card is not provided in the package, you can buy one yourself. To remove the microSD card, open the rubber cap and press the microSD card gently. When the microSD card pops up 8
automatically, take it ouDo not remove the card wht. en it is being e data the Battery ttery for a z used. Otherwise, the card and the EC5805 may be damaged, and thstored on the card may be corrupted. ChargingNote: If you have not used the balong time, please charge it first. Method 1: Charging by Using the Charger tion: Use the charger compatible the EC5805 model and provided by the designated manufacturers only. If the charger incompatible with the device model or provided by other manufacturersCauz or 9
vendors is used, the EC5805 may fail to work and dangers may be caused. Asame time, any national regulations oterminal products or warrantyt the n applicable charger is not provided in the cal ecting to to the EC5805 may fail to work. z The charger is an optional accessory. If the package, you can contact your lodealer to buy one yourself. Method 2: Charging by Conna PC 1. Power off the EC5805. 2. Connect the EC5805 and PC with compatible data cable. Accessing the Internet Through a Wi-Fi Connection Note: By default, the management a 10
11 parameters are preset on the EC5805 according to the requirements of the service rovider. You can follow the steps below to tails t Web . Step2: Establish a Wi-Fi and hold Power button until the s n until i wered (Ta1. Make sure Wi-Fi/WPS indicator is pquickly access the Internet. For the deabout how to set the managemenparameters, see the Help on the management page. Step1: Power on the EC5805Connection. Step3: Access the Internet. 1. Power on the EC5805 Pressindicators become lightened, the EC5805 ipowered on. Note: Press and hold Power buttothe ndicators are off, the EC5805 is pooff. 2. Establish a Wi-Fi Connectionking a PC for Example)
continuously on in green. Select Start > Control Panel > Network Connections > WireNetwork Connection. 2. less Note: To set up a Wi-Fi connection, the PC must be configured with a wireless network ection is d ter is ava e, you need to check your 3. isplay the wireless 4. the hen adapter. If Wireless Network Connisplayed, the wireless network adapilable. Otherwiswireless network adapter. Click View available Wireless Netw to dorks network list. Select the network whose SSID issame as that of the EC5805, and tclick . 12
Note:z ready s he network key If the encryption parameter is alset for the EC5805, the WirelesNetwork Connection dialog box is displayed and requires tand confirmation. z The SSID and key label is attached on the EC5805. 13
14 Wait until the wireless connection icon isdisplayed in the status area in the lower right corner of the screen. Then, you can connect your PC to the EC5805. the Internet tablish a Wi-Fi connection , you can access the Internet following two mode On Demand. 3 ccessAfter you essuccessfully in either of the s. By default, the mode isMode Operations . AOn Demand en ired. m After the EC5805 is powered on, it can automatically connect to the network whdata transmission is requIf data transmission is not performed over a period of time, the EC5805 automatically disconnects frothe Internet. M ect ct from the network as prompted. anual You can launch web management page to connto or disconne
15 Note: z You can launch the web managemepage to select the mode of accessingnt the tically Through a USB Connection PC using the ble. . d g the Web etween and the Client is proper. ernet browser and enter Internet. z If the EC5805 accesses the roaming network, the EC5805 automadisconnects from the established network connection. Accessing the Internet 1. Power on the EC5805. 2. Connect the EC5805 to compatible USB data ca3. The operating system automatically detects and recognizes new hardware4. Launch the web management page, anthen click connect button to connect to the network as prompted. inAccessManagement Page 1. Make sure that the connection bthe EC58052. Start the Int http://192.168.1.1 in the address bar.
16 3. Enter the password, and then click efault user name is cricket. e default password is 0000. eb 1. eb management page. k to manage contacts. ssage (SMS) ge. 5805 efault, the EC5805 changes to Login. Note: z The dz ThPhonebook You can enjoy phonebook service on the wmanagement page. Access the w2. Click PhonebooSMS You can enjoy the short meservice on the web management page. 1. Access the web management pa2. Click SMS to view, create, reply, or send a message. Daily Use Saving Power mode If no operation is performed on the ECfor a while, the indicators are off. If the EC5805 has not been accessed for 10 minutes by dthe deep sleep state.
17 When the EC5805 is in the deep sleep state, you can press any key to activate Disabling the Wi-Fi WPS indicator is off, the Wi-Fi is t g a WPS Connection ed to the en, the EC5805. If the EC5805 is activated,the indicators become lightened. Enabling/Function Press and hold Wi-Fi/WPS button until Wi-Fi/WPS indicator is continuously on in green, the Wi-Fi is enabled. Note: Press and hold Wi-Fi/WPS button until Wi-Fi/disabled. Es ablishinIf the Wi-Fi Clients connected to the EC5805support the WPS function, the EC5805 can generate a network key without manual ut. To establish a W inp PS connection ,do as follows: 1. Power on the EC5805. 2. Start the Clients connectEC5805. 3. Enable the WPS function of the EC5805.Note: Press and hold Wi-Fi/WPS buttonuntil Wi-Fi/WPS indicator is blinking in grethe WPS is enabled.
18 4. Enable the WPS fNote: For the Wi-Fi opesee the Clients’ user guRestoring the FactIf you forget the changeparameters, you can choosfactory defaults and reunction of the Clients. rations of the Clients, ide. ory Defaults s of some e to restore 5805. configure the EC Press and hold it until all the e off, you restore the factory ll personal ettings and ir default roperly, you Reset:indicators ardefaults successfully. Note: After this operation, aconfiguration settings are deleted and all web-based management sparameters will be restored to thevalues. Tips If you cannot use the EC5805 p
can try the following ways: z See Help on the web management page. z z z 2. . Restart the EC5805. Restore the factory defaults. Contact your service provider. Example: Wi-Fi Connection to Game Machine (PSP) 1. Turn on the PSP WLAN switch. Select Settings > Network Settings Select Infrastructure Mode to coyour local Wi-Fi access point. Select New Connection to specifmnemonic connection name (suchMyEC5805). Select Scan to detect networks in3. nnect 4. y a as 5. ange. rThen the access point list is displayed. 19
6. Select the SSID same as that of the EC5805. Then press the > button consecutively to confirm the SSID and input the Wi-Fi key. SSID: The Wi-Fi name of the EC5WEP: The Wi-Fi key of the EC580The default SSID and key label is attached on the EC5805. Press the > button to continue, anz 805. z 5 z 7. then dpress X to save settings. 8. Select Test Connection to check the connection. If the test succeeds, 20
congratulations! you're online! 9. Internet Browser. -Fi Connection to 1. and turn Wi-Fi 2. works in range, int list. Now, you can go to Example: WiSmart Phone (iPhone) Select Settings > Wi-Fion. Automatically detect netthen display the access po 21
22 3. Select a network whose name is the ouch, 3viaope e Wi-Fre(Fsame as that of the EC5805. 4. If necessary, enter a password and tap Join. (Networks requiring a password appear with a lock icon.) Note: The Wi-Fi Clients such as iTPS , and NDS can also access Internet the EC5805. For details about the ration, follow the user guides of thFi Clients. quently Asked Questions AQ)
23 Whconacc rk mode is correct. e. . If the DHCP server is disabled and the Client obtains the IP address dynamicallythe device cannot access the Internet either. In this case, you need to change the mode to manually assign an IP address. See DHCP Settings on the at can I do if the Client nected to the EC5805 cannot ess the Internet? Check and ensure th1. at the Client is connected to the EC5805 properly. Check the power statu2. s to ensure that the EC5805 is powered on. Check the signal strength to e3. nsure thatthe area is covered by the network. 4. Check that the netwoFor details about network modes, see Mobile Network Settings on the web management pag5. You must configure the correct peer-peer protocol (PPP) user name andPPP password when you access the Internet through the EC5805. Check whether the user name and the password are correct, and see Profile Management on the management page for details. 6,
24 management page. 7. Check that the network adapter of your Client runs properly. 8. If the problem still persists, please consult you service provider. What can I do if the Client cannot acce1. Ithe EC5805, you can adjust tof the EC5805. 2. Check and record the following settings of your Client and your EC5805: SSID, WEP type, and key. The SSID of the Client must be ANY or the same as that of the EC5805. The WEP type and key of the Client must be the same as that of the EC5805 . Otherwise, you need to change the settings. ss the WLAN? f there are interferences or shields near he position
25 Version: V100R001_01 Part Number: 3101XXXX

User manual 1 of 2

Thank you for choosing HUAWEI EC5805 Wireless Modem (hereinafter referred to as the EC5805). z The supported functions and actual appearance are subject to your product purchased. The following pictures are provided for illustration only. For details about your product selection, consult your service provider. z This guide briefly describes the functions of the EC5805. For details about how to set the management parameters, see the Help on the web management page. z If the EC5805 is placed in an environment with poor ventilation, it will get heated after used for a long time. When the EC5805 gets heated to a certain extent, it will switch off or disconnect from the network automatically to protect itself. In this case, please expose the EC5805 in a well-ventilated place for heat dissipation and then restart the EC5805.
Getting to Know Your EC5805 Packing List The package box contains the following items. If any of the items is lost or damaged, contact your local dealer. Quick Start Safety Information Main unit Battery Data cable Some of the optional accessories are not provided in the package, you can contact 1
2 your local dealer to buy them yourself.
Application Scenarios The Wi-Fi device or computer can be connected to the Internet through the EC5805. The actual connecting procedure depends on the operating system of the Wi-Fi device or computer. You can perform the connection operations as prompted. Scenario 1: Multi-device access via Wi-Fi Smart phone Game machineDigital cameraLaptop Scenario 2: One-device access via USB 3
Scenario 3: Multi-device access via Wi-Fi and USB at the same time Smart phone Game machineDigital cameraLaptop Appearance 4
No. Item No. Item 1 Wi-Fi/WPS indicator 5 Signal indicator 2 Wi-Fi/WPS button 6 USB connector 3 Power button 7 External antenna interface 4 Power indicator Indicat Sor tatus 5
6 Indicator Status Wi-Fi/WPS z z Con : z Off: The Wi-Fi and WPSare disabled. tinuously on in greenThe Wi-Fi is enabled. Blinking in green: The WPS is enabled. Pz batlowimmthez nThe battery poz bat . ower Blinking in red: The tery power level is very and must be charged ediately; otherwise EC5805 will be powered off. Co tinuously on in red: wer level is weak. Blinking in green: The tery is being charged z n: s enoContinuously on in greeThe battery power level iugh. Sz exisnot inexignal Continuously on in red: The UIM card does not t or the PIN code is verified or the signal is istent.
Indicator Status z Thez Thez dialz dial ing Continuously on in green: EC5805 is in the normal state. Continuously on in blue: EC5805 is in the roaming state. Fast blinking in green: ing up in the normal state. Fast blinking in blue: ing up in the roamstate. z Wi-Fi: Wireless Fidelity z WPS: Wi-Fi Protected Setup Before You Start Installing the Battery Install the battery as shown in the following gure. fi 7
123 Installing the microSD Card 1. Remove the rubber cap from the microSD card slot. Then insert the microSD card into the slot. After inserting the microSD card 2. tz z completely, attach the rubber cap. No e: The microSD card is an optional accessory. If the microSD card is not provided in the package, you can buy one yourself. To remove the microSD card, open the rubber cap and press the microSD card gently. When the microSD card pops up 8
automatically, take it ouDo not remove the card wht. en it is being e data the Battery ttery for a z used. Otherwise, the card and the EC5805 may be damaged, and thstored on the card may be corrupted. ChargingNote: If you have not used the balong time, please charge it first. Method 1: Charging by Using the Charger tion: Use the charger compatible the EC5805 model and provided by the designated manufacturers only. If the charger incompatible with the device model or provided by other manufacturersCauz or 9
vendors is used, the EC5805 may fail to work and dangers may be caused. Asame time, any national regulations oterminal products or warrantyt the n applicable charger is not provided in the cal ecting to to the EC5805 may fail to work. z The charger is an optional accessory. If the package, you can contact your lodealer to buy one yourself. Method 2: Charging by Conna PC 1. Power off the EC5805. 2. Connect the EC5805 and PC with compatible data cable. Accessing the Internet Through a Wi-Fi Connection Note: By default, the management a 10
11 parameters are preset on the EC5805 according to the requirements of the service rovider. You can follow the steps below to tails t Web . Step2: Establish a Wi-Fi and hold Power button until the s n until i wered (Ta1. Make sure Wi-Fi/WPS indicator is pquickly access the Internet. For the deabout how to set the managemenparameters, see the Help on the management page. Step1: Power on the EC5805Connection. Step3: Access the Internet. 1. Power on the EC5805 Pressindicators become lightened, the EC5805 ipowered on. Note: Press and hold Power buttothe ndicators are off, the EC5805 is pooff. 2. Establish a Wi-Fi Connectionking a PC for Example)
continuously on in green. Select Start > Control Panel > Network Connections > WireNetwork Connection. 2. less Note: To set up a Wi-Fi connection, the PC must be configured with a wireless network ection is d ter is ava e, you need to check your 3. isplay the wireless 4. the hen adapter. If Wireless Network Connisplayed, the wireless network adapilable. Otherwiswireless network adapter. Click View available Wireless Netw to dorks network list. Select the network whose SSID issame as that of the EC5805, and tclick . 12
Note:z ready s he network key If the encryption parameter is alset for the EC5805, the WirelesNetwork Connection dialog box is displayed and requires tand confirmation. z The SSID and key label is attached on the EC5805. 13
14 Wait until the wireless connection icon isdisplayed in the status area in the lower right corner of the screen. Then, you can connect your PC to the EC5805. the Internet tablish a Wi-Fi connection , you can access the Internet following two mode On Demand. 3 ccessAfter you essuccessfully in either of the s. By default, the mode isMode Operations . AOn Demand en ired. m After the EC5805 is powered on, it can automatically connect to the network whdata transmission is requIf data transmission is not performed over a period of time, the EC5805 automatically disconnects frothe Internet. M ect ct from the network as prompted. anual You can launch web management page to connto or disconne
15 Note: z You can launch the web managemepage to select the mode of accessingnt the tically Through a USB Connection PC using the ble. . d g the Web etween and the Client is proper. ernet browser and enter Internet. z If the EC5805 accesses the roaming network, the EC5805 automadisconnects from the established network connection. Accessing the Internet 1. Power on the EC5805. 2. Connect the EC5805 to compatible USB data ca3. The operating system automatically detects and recognizes new hardware4. Launch the web management page, anthen click connect button to connect to the network as prompted. inAccessManagement Page 1. Make sure that the connection bthe EC58052. Start the Int http://192.168.1.1 in the address bar.
16 3. Enter the password, and then click efault user name is cricket. e default password is 0000. eb 1. eb management page. k to manage contacts. ssage (SMS) ge. 5805 efault, the EC5805 changes to Login. Note: z The dz ThPhonebook You can enjoy phonebook service on the wmanagement page. Access the w2. Click PhonebooSMS You can enjoy the short meservice on the web management page. 1. Access the web management pa2. Click SMS to view, create, reply, or send a message. Daily Use Saving Power mode If no operation is performed on the ECfor a while, the indicators are off. If the EC5805 has not been accessed for 10 minutes by dthe deep sleep state.
17 When the EC5805 is in the deep sleep state, you can press any key to activate Disabling the Wi-Fi WPS indicator is off, the Wi-Fi is t g a WPS Connection ed to the en, the EC5805. If the EC5805 is activated,the indicators become lightened. Enabling/Function Press and hold Wi-Fi/WPS button until Wi-Fi/WPS indicator is continuously on in green, the Wi-Fi is enabled. Note: Press and hold Wi-Fi/WPS button until Wi-Fi/disabled. Es ablishinIf the Wi-Fi Clients connected to the EC5805support the WPS function, the EC5805 can generate a network key without manual ut. To establish a W inp PS connection ,do as follows: 1. Power on the EC5805. 2. Start the Clients connectEC5805. 3. Enable the WPS function of the EC5805.Note: Press and hold Wi-Fi/WPS buttonuntil Wi-Fi/WPS indicator is blinking in grethe WPS is enabled.
18 4. Enable the WPS fNote: For the Wi-Fi opesee the Clients’ user guRestoring the FactIf you forget the changeparameters, you can choosfactory defaults and reunction of the Clients. rations of the Clients, ide. ory Defaults s of some e to restore 5805. configure the EC Press and hold it until all the e off, you restore the factory ll personal ettings and ir default roperly, you Reset:indicators ardefaults successfully. Note: After this operation, aconfiguration settings are deleted and all web-based management sparameters will be restored to thevalues. Tips If you cannot use the EC5805 p
can try the following ways: z See Help on the web management page. z z z 2. . Restart the EC5805. Restore the factory defaults. Contact your service provider. Example: Wi-Fi Connection to Game Machine (PSP) 1. Turn on the PSP WLAN switch. Select Settings > Network Settings Select Infrastructure Mode to coyour local Wi-Fi access point. Select New Connection to specifmnemonic connection name (suchMyEC5805). Select Scan to detect networks in3. nnect 4. y a as 5. ange. rThen the access point list is displayed. 19
6. Select the SSID same as that of the EC5805. Then press the > button consecutively to confirm the SSID and input the Wi-Fi key. SSID: The Wi-Fi name of the EC5WEP: The Wi-Fi key of the EC580The default SSID and key label is attached on the EC5805. Press the > button to continue, anz 805. z 5 z 7. then dpress X to save settings. 8. Select Test Connection to check the connection. If the test succeeds, 20
congratulations! you're online! 9. Internet Browser. -Fi Connection to 1. and turn Wi-Fi 2. works in range, int list. Now, you can go to Example: WiSmart Phone (iPhone) Select Settings > Wi-Fion. Automatically detect netthen display the access po 21
22 3. Select a network whose name is the ouch, 3viaope e Wi-Fre(Fsame as that of the EC5805. 4. If necessary, enter a password and tap Join. (Networks requiring a password appear with a lock icon.) Note: The Wi-Fi Clients such as iTPS , and NDS can also access Internet the EC5805. For details about the ration, follow the user guides of thFi Clients. quently Asked Questions AQ)
23 Whconacc rk mode is correct. e. . If the DHCP server is disabled and the Client obtains the IP address dynamicallythe device cannot access the Internet either. In this case, you need to change the mode to manually assign an IP address. See DHCP Settings on the at can I do if the Client nected to the EC5805 cannot ess the Internet? Check and ensure th1. at the Client is connected to the EC5805 properly. Check the power statu2. s to ensure that the EC5805 is powered on. Check the signal strength to e3. nsure thatthe area is covered by the network. 4. Check that the netwoFor details about network modes, see Mobile Network Settings on the web management pag5. You must configure the correct peer-peer protocol (PPP) user name andPPP password when you access the Internet through the EC5805. Check whether the user name and the password are correct, and see Profile Management on the management page for details. 6,
24 management page. 7. Check that the network adapter of your Client runs properly. 8. If the problem still persists, please consult you service provider. What can I do if the Client cannot acce1. Ithe EC5805, you can adjust tof the EC5805. 2. Check and record the following settings of your Client and your EC5805: SSID, WEP type, and key. The SSID of the Client must be ANY or the same as that of the EC5805. The WEP type and key of the Client must be the same as that of the EC5805 . Otherwise, you need to change the settings. ss the WLAN? f there are interferences or shields near he position
25 Version: V100R001_01 Part Number: 3101XXXX

Navigation menu