Huawei Technologies F201 Fixed Wireless Terminal User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1492795
Application ID	RP3MhS2y5z9w37a4wikr2A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.94kB (299237 bits)
Date Submitted	2011-06-29 00:00:00
Date Available	2011-06-29 00:00:00
Creation Date	2011-06-22 16:24:32
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-06-22 16:27:56
Document Title	精彩沟通 无线生活
Document Creator	Microsoft® Office Word 2007
Document Author:	w60010766

Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei Technologies Co.,
Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said
software, unless such restrictions are prohibited by applicable laws or such actions are approved by
respective copyright holders under licenses.
Trademarks and Permissions
, HUAWEI, and
are trademarks or registered trademarks of Huawei Technologies Co.,
Ltd.
Other trademarks, product, service and company names mentioned are the property of their
respective owners.
Notice
Some features of the product and its accessories described herein rely on the software installed,
capacities and settings of local network, and may not be activated or may be limited by local network
operators or network service providers. Thus the descriptions herein may not exactly match the
product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications
contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI
TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL
OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will obtain all
necessary governmental permits and licenses in order to export, re-export or import the product
mentioned in this manual including the software and technical data therein.
Appearance

Note:
The figures in this guide are provided for your reference only.
Front View
No.
Keys/Indicators
Description
Left function
key
Select the option displayed in the lower left corner of the screen.

Navigation keys


Right function
key
Select the option displayed in the lower right corner of the
screen.

Number and
symbol keys



Speaker
indicator
Access the main menu by pressing the OK key in standby
mode.
Access a shortcut menu by pressing the corresponding
navigation key in standby mode.
Adjust the volume by pressing the navigation keys during a
call.
Enter numbers, letters, and symbols.
Number keys (2–9): Speed-dial a phone number by pressing
and holding a key in standby mode.
# key: Switch between text input methods in editing mode.
* key: Display the symbol list in editing mode.
When the hands-free mode is activated, the speaker indicator is
on.
No.
Keys/Indicators
Description
Power indicator
When the power adapter is connected, this indicator is on.
Call/Send key


Speaker key
Activate the hands-free mode to dial a number already entered or
answer an incoming call.

End key
Make or answer a call.
View the call log in standby mode.



End or cancel a call.
Power the phone on or off by pressing and holding the key.
Turn the backlight on or off in standby mode.
Return to the standby mode.
10
Speed dial keys
Speed-dial a defined phone number in standby mode.
11
Shortcut keys
Each shortcut key carries a specific function.
Screen Icons
Icon
Description
Icon
Description
Signal strength
Battery level
Alarm clock
Hands-free mode
Call in progress
No network available
Unread message
Unopened voicemail message
Phone powered by the power
adapter
Roaming
Installation
(Optional) Installing a UIM Card
Ensure that the phone is powered off and disconnected from the power adapter. When installing
a User Identity Module (UIM) card, ensure that the golden contacts of the UIM card are facing
downward and that the beveled edge of the UIM card is properly aligned with that of the UIM
card slot. Then check that the UIM card is completely inserted.

Note:
Do not frequently remove the UIM card when using the phone.
Installing the Battery
Before using the phone, install the battery properly. When installing the battery, ensure that the
phone is powered off and is disconnected from the power adapter; ensure that the golden
contacts of the battery mate securely with those in the battery slot.

Note:
If the phone will not be used for a long time, remove the battery from the phone.
Charging the Battery

Note:
 When the phone is delivered, the batter power is lower. Therefore, charge the
phone for a while and then power on the phone the first time you use it.
 When you use the phone, it is recommended that you connect the power adapter to
the phone. When using the battery to power the phone, ensure that the battery power
is sufficient.
 I/O connects can only support charging. It can’t support USB with PC for data transfer.
Powering On the Phone
To power on the phone, press and hold the End key until the screen lights up.

Note:
Press and hold the End key to power off the phone.
Call Functions
Making a Call
1.
In standby mode, press the number keys to enter a phone number.
2.
Press the Call key to dial the number.
3.
Press the End key to end the call or cancel the dialing.

Note:
 In standby mode, press the Call key to view the call log. Find the desired number in
the call log, and then press the Call key dial the number.
 Find the desired number in the phonebook, and then press the Call key to dial the
number.
Answering or Rejecting a Call
When there is an incoming call, press the Call key to answer the call; press the End key to
reject the call.
Messages
Writing a Message
1.
Select Messages > Write Message.
2.
Write the message.
3.
Press the OK key, and then add a recipient using one of the following methods:


Enter the recipient's phone number.
4.
Press the OK key to send the message.
Add the recipient from the phonebook.
Reading a Message
The phone stores received messages in the inbox.
1.
Select Messages > Inbox.
2.
Press the Up or Down navigation key to scroll to a message in the list.
3.
Press the OK key to open and read the message.
4.
Press the Left function key to manage the message.
Text Input Methods
Switching Between Input Methods
In editing mode, press the # key to switch between input methods.

Note:
 In editing mode, press the Right function key to delete the character to the left the
cursor; press and hold the Right function key to delete all characters.
 In "ABC" and "abc" input modes, press the 0 key to enter a space.
 In any input mode, press the * key to display the symbol list.
Traditional English Input ("ABC" or "abc")
In "ABC" or "abc" text input mode, press the number keys to enter letters. Press a number key
repeatedly until the desired character appears. If the next letter you want to enter is on the same
key as the current one, wait until the current letter is entered, and then enter the next one.
Predictive English Input ("eZiEn ")
1.
2.
3.
Press the keys labeled with the letters required to spell the desired word once according to
the spelling sequence of the word.
As you enter letters, the phone attempts to predict the desired word and displays candidate
words.
Press the Up or Down navigation key to scroll to the desired word.
Press the Left or Right navigation key to enter the word, or press the 0 key to enter the
word followed by a space.
Number Input
In "123" input mode, enter a desired number by pressing the number key.
Settings
To configure and customize your phone settings, select Menu > Settings.
Phone Lock
To set the phone lock, select Settings > Security > Phone Lock. You can change the default
phone lock code (000000) to a personalized password.
Keypad Lock
In standby mode, press and hold the # key to lock the keypad.
In standby mode, press the Left function key and then the * key to unlock the keypad.
(Optional) PIN and PUK
A Personal Identification Number (PIN) protects your UIM card from unauthorized use. A PIN
Unblocking Key (PUK) is used to change a blocked PIN. If you enter an incorrect PIN a
pre-defined number of consecutive times, your UIM card will be locked and the phone asks you
to enter the PUK to unlock it. Both the PIN and the PUK are supplied with the SIM card. For
details, contact your service provider.
FAQs
If problems occur during the use of the phone, refer to the following sections for a proper
solution. If a problem persists, contact your phone vendor.
Phone Cannot Be Powered On
1. Remove the battery cover and check whether the battery is installed properly.
2. If the battery is properly installed, a possible cause for the problem is that the battery power is
low.Charge the battery, and then try to power on the phone.
No Information Is Displayed on the Phone Screen
If the phone is not used for a long time and the battery runs out of power, the phone may not
display any information when it is being charged. This is a normal phenomenon. The phone can
be powered on after the battery is charged for a while.
Battery Cannot Be Charged
3. Check that the phone and the power adapter are connected properly.
4. Check that the power adapter and the power socket are connected properly.
5. Replace the power adapter or the battery with a new one of the same model.
Signal Strength Is Weak
1. Check that the UIM card is installed properly.
2. Place the phone at a location where strong signals can be received.
Call Volume is Too High or Too Low
During a call, press navigation keys to adjust the volume.
Version:V100R001_01
Part number: 96720399
Safety Information
This section contains important information pertaining to the operating
instructions of your device. It also contains information about how to use
the device safely. Read this information carefully before using your
device.
Electronic Device
Do not use your device if using your device is prohibited. Do not use the
device when using your device causes danger or interference with
electronic devices.
Medical Device
· Follow rules and regulations set forth by hospitals and health care
facilities. Do not use your device when using the device is prohibited.
· Some wireless devices may affect the performance of hearing aids or
pacemakers. For any such problems, consult your service provider.
· If you are using an electronic medical device, consult the doctor or the
device manufacturer to confirm whether radio waves affect the
operation of this device.
Potentially Explosive Atmosphere
Do not use your device in any area with a potentially explosive
atmosphere, and comply with all signs and instructions. Areas that may
have potentially explosive atmospheres include the areas where you
would normally be advised to turn off your vehicle engine. Triggering of
sparks in such areas could cause an explosion or a fire, resulting in
bodily injuries or even deaths. Do not use your device at refueling points
such as service stations. Comply with restrictions on the use of radio
equipment in fuel depots, storage, and distribution areas, and chemical
plants. In addition, adhere to restrictions in areas where blasting
operations are in progress. Before using the device, watch out for areas
that have potentially explosive atmospheres that are often, but not always,
clearly marked. Such locations include areas below the deck on boats,
chemical transfer or storage facilities, and areas where the air contains
chemicals or particles such as grain, dust, or metal powders. Ask the
manufacturers of vehicles using liquefied petroleum gas (such as
propane or butane) whether this device can be safely used in their
vicinity.
Traffic Security
· Observe local laws and regulations while using the device. To prevent
accidents, do not use your wireless device while driving.
· RF signals may affect electronic systems of motor vehicles. For more
information, consult the vehicle manufacturer.
· In a motor vehicle, do not place the device over the air bag or in the air
bag deployment area. Otherwise, the device may hurt you owing to the
strong force when the air bag inflates.
· Do not use your device while flying in an aircraft and before boarding
an aircraft. Using wireless devices in an aircraft may cause danger to
the operation of the aircraft and disrupt the wireless telephone network.
It may also be considered illegal.
Operating Environment
· Do not use or charge the device in dusty, damp, and dirty places or
places with magnetic fields. Otherwise, it may result in a malfunction of
the circuit.
· While using the device, observe the local laws and regulations, and
respect others' privacy and legal rights.
· Place the device or accessories in well-ventilated, cool, and
out-of-direct-sunlight place. Avoid enveloping the device, or covering
towels and placing articles on the device. Place the device out of a box
or case to avoid poor heat dissipation that results in the damage to the
device.
· On a stormy day with thunder, do not use your device, to prevent any
danger caused by lightning.
· Keep the ambient temperature between –10°C to +45°C for using the
device.
· This device should be installed and operated with a minimum distance
of 20 cm between the antenna and all persons.
Safety of Children
Comply with all precautions with regard to children's safety. Letting the
child play with your device or its accessories, which may include parts
that can be detached from the device, may be dangerous, as it may
present a choking hazard. Ensure that small children are kept away from
the device and accessories.
Accessories
Use the accessories delivered only by the manufacturer. Using
accessories of other manufacturers or vendors with this device model
may invalidate any approval or warranty applicable to the device, result in
the non-operation of the device, and cause danger.
Charger
· Use the AC power supply defined in the specifications of the charger.
An improper power voltage may cause a fire or a malfunction of the
charger.
· If the power cable is damaged (for example, the cord is exposed or
broken), or the plug loosens, stop using the cable at once. Otherwise, it
may lead to an electric shock, a short circuit of the charger, or a fire.
Cleaning and Maintenance
It is normal that your wireless device gets hot when you use or charge it.
Before you clean or maintain the wireless device, stop all applications
and disconnect the wireless device from your PC.
· Use your wireless device and accessories with care and in a clean
environment. Keep the wireless device away from a fire or a lit
cigarette.
· Protect your wireless device and accessories from water and vapor,
and keep them dry.
· Do not drop, throw, or bend your wireless device.
· Do not use any chemical detergent, powder, or other chemical agents
(such as alcohol and benzene) to clean the device and the charger.
Otherwise, parts of the device may be damaged or a fire can be
caused. You can clean the device and the charger with a piece of
damp and soft antistatic cloth.
· Do not dismantle the device or accessories. Otherwise, the warranty
on the device and accessories is invalid and the manufacturer is not
liable to pay for the damage.
FCC Statement
15.19
NOTICE:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21
NOTICE:
Changes or modifications made to this device not expressly approved by
Huawei Technologies Co., Ltd. may void the FCC authorization to
operate this device.
15.105
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by adopting one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the distance between the equipment and the receiver.
· Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio or TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2011:06:22 16:27:56+08:00
Create Date                     : 2011:06:22 16:24:32+08:00
Metadata Date                   : 2011:06:22 16:27:56+08:00
Creator Tool                    : Microsoft® Office Word 2007
Format                          : application/pdf
Title                           : 精彩沟通  无线生活
Creator                         : w60010766
Document ID                     : uuid:2eac3751-73ee-4469-9346-7645a0c45bf9
Instance ID                     : uuid:10027ede-dabd-472d-ae04-bf98ffbd0a25
Producer                        : Microsoft® Office Word 2007
Page Count                      : 10
Author                          : w60010766

EXIF Metadata provided by EXIF.tools