Huawei Technologies FC312E Cordless Phone User Manual ETS8121 8321 Cordless Phone User Guide
Huawei Technologies Co.,Ltd Cordless Phone ETS8121 8321 Cordless Phone User Guide
Contents
- 1. Manual
- 2. User Manual
User Manual
![](/img.php?id=1412488&img=bg1.png)
FC312E
Cordless Phone
USER GUIDE
![](/img.php?id=1412488&img=bg2.png)
Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner
reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions
are prohibited by applicable laws or such actions are approved by respective
copyright holders under licenses.
Trademarks and Permissions
, HUAWEI, and are trademarks or registered trademarks of Huawei
Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the
property of their respective owners.
Notice
Some features of the product and its accessories described herein rely on the
software installed, capacities and settings of local network, and may not be
activated or may be limited by local network operators or network service
providers, thus the descriptions herein may not exactly match the product or its
accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any
information or specifications contained in this manual without prior notice or
obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI
TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR
ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations
and will obtain all necessary governmental permits and licenses in order to export,
re-export or import the product mentioned in this manual including the software
and technical data therein.
![](/img.php?id=1412488&img=bg3.png)
1
Your Cordless Phone
1
2
3
4
5
6
7
8
9
10
11
12
Note:
The figures of the cordless phone in this document
are provided for your reference only. The product
appearance may vary according to products.
NO.
Item
NO.
Item
1
Earpiece
7
Charger interface
2
Screen
8
* key
3
Right soft key
9
Number keys
4
End key
10
Call/Redial key
5
# key
11
Left Soft key
6
Microphone
12
Scroll keys
![](/img.php?id=1412488&img=bg4.png)
2
Keys and Functions
Press…
To…
Right soft key
Access the Contacts screen in
standby mode.
Select the option displayed on the
lower right.
End key
Power on or off the cordless phone by
pressing and holding it in the standby
mode.
End a call or reject an incoming call.
Return to the standby mode.
# key
Switch between different input modes in
editing mode.
* key
Access the symbol screen in editing
mode.
Number keys
Enter numbers, letters, and symbols.
Speed-dial phone numbers in standby
mode (by pressing and holding the 2–9
keys).
Call/Redial key
Make or answer a call.
View the call history in standby mode.
Left soft key
Access the main menu in standby
mode.
Select the option displayed in the lower
left corner of the screen.
![](/img.php?id=1412488&img=bg5.png)
3
Press…
To…
Scroll keys
Access the shortcut screen in standby
mode.
Access the main menu by press the OK
key in standby mode.
During a call, press left key or right key
to adjust the volume of the earpiece.
Screen Icons
Icon
Indicates
Icon
Indicates
Network signal
strength
Battery power level
Calling
Alarm clock is on
Message received
Memory for
messages is full,
when the icon is
blinking
Keypad is locked
Remind by sound
![](/img.php?id=1412488&img=bg6.png)
4
Menu Tree
SMS
Contacts
Call history
1. Write
message
2. Inbox
3. Outbox
4. Drafts
5. Voicemail
6. Cell
broadcast
7. Settings
1. Contacts
2. Create
3. Speed-dial
4. Management
1. All Calls
2. Missed Calls
3. Received Calls
4. Dialed Calls
Tools
FM radio
(Optional)
Settings
1. Alarm
1. Display
settings
2. Phone settings
3. Audio settings
4. Call settings
5. Security
settings
6. Restore
factory settings
![](/img.php?id=1412488&img=bg7.png)
5
Installing the SIM Card and Battery
Make sure that the golden area on the SIM card is facing
downwards and that the beveled edge of the SIM card is
properly aligned with that of the card slot.
Charging the Battery
Charging the battery in either of the following ways:
Method 1:
Method 2:
![](/img.php?id=1412488&img=bg8.png)
6
Note:
Remove the battery if the cordless phone is left
unused for a long period.
If the battery of the cordless phone has not
been used for a long time or the battery is
exhausted, the screen of the cordless phone
may not function when you charge the battery
again. This is normal. After the battery is being
charged for a while, you can power on the
cordless phone for use.
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries
according to the instructions.
Using the Function Menu
1. In the standby mode, press to display the Menu
screen.
2. Press scroll keys to scroll in the menu.
3. Press to display the menu.
4. Press the Up or Down key to scroll to a submenu item and
press to select the submenu.
5. Press to return to the previous menu or return to the
home screen.
6. Press to return to the home screen.
Making a Call
1. In the standby mode, enter a phone number.
2. Press to dial the number.
3. Press to end the call.
![](/img.php?id=1412488&img=bg9.png)
7
Note:
In the standby mode, press to view the
call history. Select a record and press to
dial this number.
Select a contact from the cordless phonebook
and press to call this contact.
When the cordless phone is locked, enter the
lock code to unlock the cordless phone first;
otherwise, you can only make emergency calls
or answer calls.
During a call, press key to switch the
hands free.
Answering a Call
When there is an incoming call, you can press or
to answer it. Press or to reject it.
PIN and PUK
The personal identity number (PIN) protects your SIM card
from unauthorized use. The PIN unblocking key (PUK) can
unblock the blocked PIN. Both the PIN and PUK are delivered
with the SIM card. For details, consult your service provider.
Locking the Keypad
In the standby mode, press and hold # to lock the keypad.
When the keypad is locked, you can press or to
answer an incoming call.
You can press and * to unlock the keypad.
![](/img.php?id=1412488&img=bga.png)
8
When the key guard function is enabled, if there is no operation
on the cordless phone for a preset period, the keypad is locked
automatically.
Changing the Text Input Modes
The indicator of the current text input mode is displayed on the
screen. In the editing mode, press # to change the input mode.
Note:
In the editing mode, press once to
delete the letter on the left of the cursor. Press
and hold to delete all the entered letters.
In the "Eng" input mode, press 0 to enter a
space. In the "ABC" or "abc" input mode, press
0 once to enter a space, twice to enter "0",and
three times to move the cursor to the next line.
In the "ABC", "abc" or "Eng" input mode, press
1 repeatedly to select and enter the commonly
used punctuations.
Entering English (Eng)
In the "Eng" input mode, do the follows to enter the English
letters:
1. Press each desired key once corresponding to the
sequence of the word. Then the cordless phone displays the
commonly used words according to the numeric sequence
of key presses.
2. Press the Up or Down key to scroll to the desired word.
3. Press the Left or Right key to select the word. Press 0 to
enter the word and a space.
![](/img.php?id=1412488&img=bgb.png)
9
Entering English (ABC or abc)
In the "ABC" or "abc" input mode, you can press a key labeled
with the desired letters once to enter the first letter on the key,
twice to enter the second letter on the key, and so on.
Note:
If the letter you want to enter is on the same key as
the previous one, you can enter the latter one only
after the cursor appears again or after you press the
Right key to move the cursor to the next space.
Entering Numbers
In the "123" input mode, press a key labeled with the desired
number.
In the "ABC" or "abc" input mode, press a key continuously
or press and hold it until the desired number appears on the
screen.
In the "Eng" input mode, press a key and then press the
Down key to select desired number.
Entering Symbols
1. In any input mode, press * key to display a symbol list.
2. Press scroll keys to select the desired symbol.
3. Press to enter the symbol.
Warnings and Precautions
This section contains important information pertaining to the
operating instructions of your device. It also contains
information about how to use the device safely. Read this
information carefully before using your device.
Electronic Device
Power off your device if using the device is prohibited. Do not
use the device when using the device causes danger or
interference with electronic devices.
10
Medical Device
Follow rules and regulations set forth by hospitals and health
care facilities. Do not use your device when using the device
is prohibited.
Pacemaker manufacturers recommend that a minimum
distance of 15 cm be maintained between a device and a
pacemaker to prevent potential interference with the
pacemaker. If you are using a pacemaker, use the device on
the opposite side of the pacemaker and do not carry the
device in your front pocket.
Potentially Explosive Atmosphere
Power off your device in any area with a potentially explosive
atmosphere, and comply with all signs and instructions. Areas
that may have potentially explosive atmospheres include the
areas where you would normally be advised to turn off your
vehicle engine. Triggering of sparks in such areas could cause
an explosion or a fire, resulting in bodily injuries or even deaths.
Do not power on your device at refueling points such as service
stations. Comply with restrictions on the use of radio equipment
in fuel depots, storage, and distribution areas, and chemical
plants. In addition, adhere to restrictions in areas where
blasting operations are in progress. Before using the device,
watch out for areas that have potentially explosive
atmospheres that are often, but not always, clearly marked.
Such locations include areas below the deck on boats,
chemical transfer or storage facilities, and areas where the air
contains chemicals or particles such as grain, dust, or metal
powders. Ask the manufacturers of vehicles using liquefied
petroleum gas (such as propane or butane) whether this device
can be safely used in their vicinity.
Traffic Security
Observe local laws and regulations while using the device. In
addition, if using the device while driving a vehicle, comply with
the following guidelines:
11
Concentrate on driving. Your first responsibility is to drive
safely.
Do not talk on the device while driving. Use hands-free
accessories.
When you have to make or answer a call, park the vehicle at
the road side before using your device.
RF signals may affect electronic systems of motor vehicles.
For more information, consult the vehicle manufacturer.
In a motor vehicle, do not place the device over the air bag
or in the air bag deployment area. Otherwise, the device
may hurt you owing to the strong force when the air bag
inflates.
Do not use your device while flying in an aircraft. Power off
your device before boarding an aircraft. Using wireless
devices in an aircraft may cause danger to the operation of
the aircraft and disrupt the wireless telephone network. It
may also be considered illegal.
Operating Environment
Do not use or charge the device in dusty, damp, and dirty
places or places with magnetic fields. Otherwise, it may
result in a malfunction of the circuit.
The device complies with the RF specifications when the
device is used near your ear or at a distance of 1.5 cm from
your body. Ensure that the device accessories such as a
device case and a device holster are not composed of metal
components. Keep your device 1.5 cm away from your body
to meet the requirement earlier mentioned.
On a stormy day with thunder, do not use your device when
it is being charged, to prevent any danger caused by
lightning.
When you are on a call, do not touch the antenna. Touching
the antenna affects the call quality and results in increase in
power consumption. As a result, the talk time and the
standby time are reduced.
12
While using the device, observe the local laws and
regulations, and respect others' privacy and legal rights.
Keep the ambient temperature between 0°C and 45°C while
the device is being charged. Keep the ambient temperature
between -10°C to 55°C for using the device powered by a
battery.
Prevention of Hearing Damage
Using a headset at high volume can damage your hearing. To
reduce the risk of damage to hearing, lower the headset
volume to a safe and comfortable level.
Safety of Children
Comply with all precautions with regard to children's safety.
Letting the child play with your device or its accessories, which
may include parts that can be detached from the device, may
be dangerous, as it may present a choking hazard. Ensure that
small children are kept away from the device and accessories.
Accessories
Use the accessories delivered only by the manufacturer. Using
accessories of other manufacturers or vendors with this device
model may invalidate any approval or warranty applicable to
the device, result in the non-operation of the device, and cause
danger.
Battery and Charger
Unplug the charger from the electrical plug and the device
when not in use.
The battery can be charged and discharged hundreds of
times before it eventually wears out. When the standby time
and the talk time are shorter than the normal time, replace
the battery.
Use the AC power supply defined in the specifications of the
charger. An improper power voltage may cause a fire or a
malfunction of the charger.
13
Do not connect two poles of the battery with conductors,
such as metal materials, keys, or jewelries. Otherwise, the
battery may be short-circuited and may cause injuries and
burns on your body.
Do not disassemble the battery or solder the battery poles.
Otherwise, it may lead to electrolyte leakage, overheating,
fire, or explosion.
If battery electrolyte leaks out, ensure that the electrolyte
does not touch your skin and eyes. When the electrolyte
touches your skin or splashes into your eyes, wash your
eyes with clean water immediately and consult a doctor.
If there is a case of battery deformation, color change, or
abnormal heating while you charge or store the battery,
remove the battery immediately and stop using it. Otherwise,
it may lead to battery leakage, overheating, explosion, or
fire.
If the power cable is damaged (for example, the cord is
exposed or broken), or the plug loosens, stop using the
cable at once. Otherwise, it may lead to an electric shock, a
short circuit of the charger, or a fire.
Do not dispose of batteries in fire as they may explode.
Batteries may also explode if damaged.
Danger of explosion if battery is incorrectly replaced.
Recycle or dispose of used batteries according to the local
regulations or reference instruction supplied with your
device.
Cleaning and Maintenance
The device, battery, and charger are not water-resistant.
Keep them dry. Protect the device, battery, and charger from
water or vapor. Do not touch the device or the charger with a
wet hand. Otherwise, it may lead to a short circuit, a
malfunction of the device, and an electric shock to the user.
Do not place your device, battery, and charger in places
where they can get damaged because of collision.
14
Otherwise, it may lead to battery leakage, device
malfunction, overheating, fire, or explosion.
Do not place magnetic storage media such as magnetic
cards and floppy disks near the device. Radiation from the
device may erase the information stored on them.
Do not leave your device, battery, and charger in a place
with an extreme high or low temperature. Otherwise, they
may not function properly and may lead to a fire or an
explosion. When the temperature is lower than 0°C,
performance of the battery is affected.
Do not place sharp metal objects such as pins near the
earpiece. The earpiece may attract these objects and hurt
you when you are using the device.
Before you clean or maintain the device, power off the
device and disconnect it from the charger.
Do not use any chemical detergent, powder, or other
chemical agents (such as alcohol and benzene) to clean the
device and the charger. Otherwise, parts of the device may
be damaged or a fire can be caused. You can clean the
device and the charger with a piece of damp and soft
antistatic cloth.
Do not dismantle the device or accessories. Otherwise, the
warranty on the device and accessories is invalid and the
manufacturer is not liable to pay for the damage.
Emergency Call
You can use your device for emergency calls in the service
area. The connection, however, cannot be guaranteed in all
conditions. You should not rely solely on the device for
essential communications.
Certification Information (SAR)
This device meets guidelines for exposure to radio waves.
Your device is a low-power radio transmitter and receiver. As
recommended by international guidelines, the device is
designed not to exceed the limits for exposure to radio waves.
15
These guidelines were developed by the independent scientific
organization International Commission on Non-Ionizing
Radiation Protection (ICNIRP) and include safety measures
designed to ensure safety for all users, regardless of age and
health.
The Specific Absorption Rate (SAR) is the unit of measurement
for the amount of radio frequency energy absorbed by the body
when using a device. The SAR value is determined at the
highest certified power level in laboratory conditions, but the
actual SAR level of the device when being operated can be well
below the value. This is because the device is designed to use
the minimum power required to reach the network.
The SAR limit adopted by USA and Canada is 1.6
watts/kilogram (W/kg) averaged over one gram of tissue. The
highest SAR value reported to the FCC and IC for this device
type when tested for use at the ear is 0.880W/kg, and when
properly worn on the body is 0.513 W/kg.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,there is no
guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to
radio or television reception,which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
![](/img.php?id=1412488&img=bg12.png)
16
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications made to this device not
expressly approved by Huawei Technologies Co., Ltd. may void
the FCC authorization to operate this device.
Disposal and Recycling Information
This symbol on the device (and any included
batteries) indicates that they should not be
disposed of as normal household garbage. Do not
dispose of your device or batteries as unsorted
municipal waste. The device (and any batteries)
should be handed over to a certified collection
point for recycling or proper disposal at the end of their life.
For more detailed information about the recycling of the device
or batteries, contact your local city office, the household waste
disposal service, or the retail store where you purchased this
device.
The disposal of this device is subject to the Waste from
Electrical and Electronic Equipment (WEEE) directive of the
European Union. The reason for separating WEEE and
batteries from other waste is to minimize the potential
environmental impacts on human health of any hazardous
substances that may be present.