Huawei Technologies HG520C Home Gateway User Manual
Huawei Technologies Co.,Ltd Home Gateway Users Manual
Contents
- 1. manual
- 2. Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1166429 |
| Application ID | NQhGmF6G7S8F4SMQoHAxUg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 191.24kB (2390553 bits) |
| Date Submitted | 2009-09-09 00:00:00 |
| Date Available | 2009-09-09 00:00:00 |
| Creation Date | 2009-05-14 09:18:53 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2009-05-15 12:20:21 |
| Document Title | Users Manual |
| Document Creator | Acrobat PDFMaker 7.0 for Word |
EchoLife HG520c Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD. EchoLife HG520c Home Gateway V100R001 User Guide Issue 01 Date 2009-05-15 Part Number 202139 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: terminal@huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , and Technologies Co., Ltd. are trademarks or registered trademarks of Huawei Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Contents 1 Safety Precautions..................................................................................... 1 2 Connecting the Cables and Getting Started............................................ 4 2.1 Simple Connection .......................................................................................4 2.2 Connecting One Telephone ..........................................................................5 2.3 Connecting Multiple Telephones .................................................................6 2.4 Getting Started .............................................................................................7 3 Setting the Network-Access Parameters ................................................. 7 3.1 Accessing the Network Through the Embedded PPP Dial-Up Software on the HG520c..........................................................................................................7 3.2 Accessing the Network Through the PPP Dial-Up Software on Your Computer .............................................................................................................8 4 Configuring the Wireless Network Connection...................................... 9 5 Configuring the HG520c......................................................................... 11 5.1 Changing the Administrator Password Used for Logging In to the Web-Based Configuration Utility ......................................................................11 5.2 Enabling or Disabling the Wireless Network Function ..............................11 5.3 Changing the Wireless Network Name and the Access Password .............12 5.4 Changing the IP Address Used for Logging In to the Web-Based Configuration Utility .........................................................................................12 5.5 Restoring Default Settings..........................................................................13 6 FAQs......................................................................................................... 13 7 Appendix.................................................................................................. 17 7.1 Indicators....................................................................................................17 7.2 Interfaces and Buttons................................................................................18 7.3 Default Settings..........................................................................................18 7.4 Technical Specifications.............................................................................18 ii 1 Safety Precautions Thank you for purchasing the EchoLife HG520c Home Gateway (hereinafter referred to as the HG520c). For safety purposes, carefully read through these safety precautions and observe them during operation. Basic Requirements Keep the device dry during storage, transportation, and operation of the device. Prevent collision of the device with other objects during storage, transportation, and operation of the device. Do not attempt to dismantle the device. In case of any fault, contact the authorized maintenance center for assistance or repair. Without prior written consent, no organization or individual is permitted to make any change to the structure, safety, and performance design of the device. While using the device, observe all applicable laws, directives and regulations, and respect the legal rights of other people. Environmental Requirements Place the device in a well-ventilated place. Do not expose the device to direct sunlight. Keep the device clean, free of dust and stain. Do not place the device near a water source or in a damp area. Place the device on a stable surface. Do not place any object on the top of the device. Reserve a minimum space of 10 cm at the four sides and on the top of the device for heat dissipation. Do not place the device on or near inflammable materials such as foam. Keep the device away from heat source or fire, such as a radiator or a candle. Keep the device away from any household appliances with strong magnetic field or electric field, such as microwave oven, refrigerator, or mobile phone. Operation Requirements Do not allow children to play with the device or accessories. Swallowing the accessories may be fatal. z Use the accessories such as the power adaptor provided or authorized only by the manufacturer. Make sure that the device does not get wet. If water gets into the device, disconnect the power supply immediately and unplug all the cables connected to the device. The power supply of the device must meet the requirements of the input voltage of the device. Before plugging or unplugging any cable, shut down the device and disconnect the power supply. While plugging or unplugging any cable, make sure that your hands are dry. Do not step on, pull, or stretch any cable. Otherwise, the cable may get damaged, leading to malfunction of the device. Do not use old or damaged cables. Keep the power plug clean and dry, to prevent electric shock or other dangers. During lightning, disconnect the device from the power supply and unplug all the cables connected to the device, such as the power cable, telephone cable, and RF cable, to prevent lightning strike. If the device is not used for a long time, disconnect the power supply and unplug the all the cables connected to the device. If smoke, sound, or smell is emitted from the device, stop using the device immediately, disconnect the power supply, unplug the power supply and other cables, and remove the batteries. Contact the authorized maintenance center for repair. Make sure that no object (such as metal shavings) enters the device through the heat dissipation vent. Do not scratch or abrade the shell of the device. The shed painting may lead to skin allergy or malfunctions of the device. If the shed painting material drops into the host, a short circuit may occur. Cleaning Requirements Before cleaning the device, stop using it, disconnect the power supply, and unplug all the cables connected to the device. Do not clean the device cover with any cleaning solution or cleanser spray. Use a piece of soft cloth to clean the device cover. Environmental Protection Do not dispose the abandoned device or battery in a garbage can. You need to dispose it according to the local regulations on disposing of device packing materials, exhausted battery and abandoned device, and support the recycling activity. Wireless Product Usage Requirements Keep the device away from magnetic storage devices (e.g., a magnetic card or a floppy disk), to prevent loss of the stored information. Stop using the device or disconnect the power supply in situations where wireless device is prohibited or using of a wireless device leads to interference or danger. The user who uses an electronic assistant medical-treatment device needs to confirm with the service center regarding the effects of the radio wave on this device. Do not take the device to the operation theater, Intensive Care Unit (ICU) or the Coronary Care Unit (CCU). When using the device maintain distance of 3 cm between your body and the antenna of the device. In the area with inflammable or explosive materials, turn off your wireless device, and follow the relevant instructions given in the label, to prevent explosion or fire. Protect the wireless device and its accessories, and use it in a clean and dust-free environment. Make sure that the wireless device does not come in contact with flame or a cigarette that is lit. Make sure that the wireless device and its accessories are dry. Do not drop, throw or try to bend your wireless device. Do not place the wireless device and its accessories in high temperature areas. EU Regulatory Conformance Hereby, Huawei Technologies Co., Ltd., declares that this EchoLife HG520c is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.huaweidevice.com/certification. After the HG520c is used for a certain period of time, the cover will be heated, which will not affect the function of the HG520c. 2 Connecting the Cables and Getting Started 2.1 Simple Connection If your telephone line is used for the broadband network access only and if you do not need to use a telephone, take the following figure as a reference for connecting the cables. LAN4 LAN3 LAN2 ADSL LAN1 POWER RESET 1. Telephone jack on the wall 2. Power adapter 3. Computer If the wireless network function is used on the HG520c for the network access, you do not need to connect the cables. 2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables. LA N 4 LA N 3 LA N 2 LINE # ### A D SL LA N 1 P O W ER R ESET ## ## MODEM 1. Telephone jack on the wall 2. Splitter 3. Power adapter 4. Computer 5. Telephone ## ## PHONE 2.3 Connecting Multiple Telephones If your telephone line is used for the broadband network access, telephone connections, and fax connections, take the following figure as a reference for connecting the cables. LAN4 LAN3 LAN2 ADSL LAN1 POWER RESET LINE # ### ## ## MODEM PHONE ## ## 1. Telephone jack on the wall 2. Splitter 3. Power adapter 4. Computer 5. Telephone 6. Fax machine 7. Microfilter 8. T connector 2.4 Getting Started To power on the HG520c, press the power button on the side panel of the HG520c. After you power on the HG520c, the ADSL indicator blinks (for less than three minutes), which indicates that the HG520c is being activated. Later, the ADSL indicator turns solid on. The POWER indicator is also solid on, which indicates that the HG520a is working properly. 3 Setting the Network-Access Parameters By configuring the HG520c and your computer, you can choose any of the following methods to surf the Internet: Accessing the Network Through the Embedded PPP Dial-Up Software on the HG520c Accessing the Network Through the PPP Dial-Up Software on Your Computer 3.1 Accessing the Network Through the Embedded PPP Dial-Up Software on the HG520c If you select this method for accessing the network, the HG520c starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer. You do not need to install any special dial-up software on your computer or perform dial-up operations on your computer. To configure the HG520c and your computer for the network access, do as follows: Step 1 Log in to the Web-based configuration utility of the HG520c. 1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1 in the address bar, and then press Enter. 2. In the displayed dialog box, enter the user name and the password, and then click OK. By default, both the user name and the password are admin. After the user name and the password are verified, you can access the Web-based configuration utility. Step 2 Enable the embedded dial-up function. 1. In the navigation tree on the left of the Web-based configuration utility, choose Basic > WAN Setting. 2. Select a PVC number, such as 1, from the PVC drop-down combo box. 3. Enter the VPI and VCI that are provided by the network operator in the VPI and VCI text boxes. 4. Select Yes from the Active drop-down combo box and select Routing from the Mode drop-down combo box. 5. Select PPPoE from the Encapsulation drop-down combo box. 6. Enter the user name and password that are provided by the network operator in the Username and Password text boxes, and keep the default settings of other parameters. 7. Click Submit to save the settings. After you complete the preceding settings, you can surf the Internet. You need to perform the preceding operations on a computer once only. The next time when you power on your computer, you can surf the Internet without any configuration. 3.2 Accessing the Network Through the PPP Dial-Up Software on Your Computer If you select this method for accessing the network, you need to install and configure the dial-up software on your computer. In addition, you need to perform dial-up operations on your computer upon each startup. To configure the HG520c and your computer for the network access, do as follows: Step 1 Set the working mode of the HG520c to Bridge. For details, refer to the procedure for enabling the embedded dial-up function described in Step 2 in section 3.1 "Accessing the Network Through the Embedded PPP Dial-Up Software on the HG520c." Note that Bridge is selected from the Mode drop-down combo box. Step 2 Install and configure the PPP dial-up software on your computer. The PPP dial-up software is pre-installed on certain computer operating systems. To create a dial-up connection, do as follows (taking the Windows XP operating system as an example): 1. Choose Start > All Programs > Accessories > Communications > Network Connections. 2. Click Create a new connection in Network Tasks to display the New Connection Wizard window, and then click Next. 3. Select Connect to the Internet, and then click Next. 4. Select Set up my connection manually, and then click Next. 5. Select Connect using a broadband connection that requires a user name and password, and then click Next. 6. Enter the name (as desired) of the dial-up connection in ISP Name, and then click Next. 7. Select Anyone's use or My use only, and then click Next. 8. Enter the user name and password provided by the network operator and used for the dial-up connection, and then click Next. 9. Select Add a shortcut to this connection to my desktop, and then click Finish. An icon for the dial-up connection is displayed on the desktop of your computer. You need to perform the preceding operations only once for creating a network connection. After the network connection is created, to access the network, double-click the icon for the dial-up connection, and then click Connect in the displayed dialog box. 4 Configuring the Wireless Network Connection If a wireless network adapter is installed on your computer, you can connect you computer to the HG520c through a wireless connection. The hardware installation methods and driver installation methods of wireless network adapters provided by different companies vary from each other. For details, see the installation guide provided by the wireless network adapter provider. After the installation of a wireless network adapter, you need to configure the wireless network connection on your computer. You can configure the wireless network connection through the software provided with the wireless network adapter. If the Windows XP operating system is used, you can also configure the wireless network connection through the wireless configuration software provided by Windows XP. To configure the wireless network connection, do as follows (taking the Windows XP operating system as an example): Step 1 Log in to the Web-based configuration utility. 1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1 in the address bar, and then press Enter. 2. In the displayed dialog box, enter the user name and the password, and then click OK. By default, both the user name and the password are admin. Step 2 Set the wireless network name and access password of the HG520c. To set the wireless network name and the access password, do as follows (taking the authentication type WPA-PSK as an example): 1. In the navigation tree on the left of the Web-based configuration utility, choose Basic > Wireless Lan. 2. Select the Enable option button of Access Point. 3. Enter a wireless network name in the SSID text box. 4. Select WPA-PSK from the Authentication Type drop-down combo box. 5. Select TKIP from the Encryption drop-down combo box. 6. Enter an access password in the Pre-Shared Key text box. 7. Click Submit to save the settings. Step 3 Enable the wireless configuration service provided by Windows XP. 1. Right-click My Computer, and then choose Manage from the shortcut menu. 2. In the Computer Management window, choose Computer Management (Local) > Services and Applications >Services. 3. From the services listed in the right pane of the Computer Management window, right-click Wireless Zero Configuration, and then choose Properties from the shortcut menu. 4. In the Wireless Zero Configuration Properties (Local Computer) dialog box, check whether Service status is Started. If not, click the Start button. 5. Click OK to close the dialog box. Then, close the Computer Management window. Step 4 Configure the wireless network connection on your computer. 1. Choose Start > All Programs > Accessories > Communications > Network Connections. 2. In the Network Connections window, right-click Wireless Network Connection to display a shortcut menu, and then choose Properties from the shortcut menu. 3. In the Wireless Network Connection Properties dialog box, select Wireless Networks. 4. Select Use Windows to configure my wireless network settings. 5. Click View Wireless Networks. 6. Select the wireless network that is configured in Step 2, and then click Connect in the lower right corner of the window. 7. In the displayed dialog box, enter the access password that is preset in Step 2, and then click Connect. After the password is verified, Connected appears on the icon of the wireless network in the wireless network list, which indicates that the computer is connected to the HG520c through a wireless connection. 8. Close the Wireless Network Connection dialog box. 9. In the Wireless Network Connection Properties dialog box, click OK. 10 5 Configuring the HG520c 5.1 Changing the Administrator Password Used for Logging In to the Web-Based Configuration Utility For safety reasons or to make the password easy to remember, you can change the administrator password for login after logging in to the Web-based configuration utility. To change the password, do as follows: Step 1 Log in to the Web-based configuration utility. Step 2 Choose Tools > System Management in the navigation tree to display the system management page. Step 3 Click Step 4 Enter the old password in the and the Old Password text box. Enter the new password in the New Password text box. Then enter the new password again in the Retype to confirm text box for confirmation. Step 5 Click Submit to save the settings. to display a dialog box. After you change the password successfully, the current page jumps to the page for logging in to the Web-based configuration utility. To log in to the Web-based configuration utility, enter the new password, and then click OK. If you forget the user name or password that has been changed, you can restore the default settings of the HG520c by pressing and holding the RESET button for over six seconds. Then, the user name and password that are used for logging in to the Web-based configuration utility are restored to default values. After you restore the default settings, however, your customized data is lost. Therefore, use this function with caution. 5.2 Enabling or Disabling the Wireless Network Function You can quickly enable or disable the wireless network function by pressing the WLAN button on the HG520c. To enable the wireless network function, press and hold the WLAN button for over one second, and then release the button. You can disable the 11 wireless network function in the same way. The WLAN indicator shows whether the wireless network function is enabled. In addition, you can enable or disable the wireless network function through the Web-based configuration utility. To enable or disable the wireless network function, do as follows: Step 1 Log in to the Web-based configuration utility. Step 2 In the navigation tree on the left, choose Basic > Wireless Lan. Step 3 Select the Enable or Disable option button of Access Point. Step 4 Click Submit to save the settings. 5.3 Changing the Wireless Network Name and the Access Password To change the name and access password for the wireless network, do as follows (taking the authentication type WPA-PSK as an example): Step 1 Log in to the Web-based configuration utility. Step 2 In the navigation tree on the left, choose Basic > Wireless Lan. Step 3 Enter a wireless network name in the SSID text box. Step 4 Select WPA-PSK from the Authentication Type drop-down combo box. Step 5 Select TKIP from the Encryption drop-down combo box. Step 6 Enter an access password in the Pre-Shared Key text box. Step 7 Click Submit to save the settings. 5.4 Changing the IP Address Used for Logging In to the Web-Based Configuration Utility To make the login IP address easy to remember, you can change the IP address after logging in to the Web-based configuration utility. To change the IP address, do as follows: Step 1 Choose Basic > LAN Setting in the navigation tree to display the LAN settings page. Step 2 Enter a new IP address as desired in the Main IP Address text box. Then, enter a subnet mask in Main Subnet Mask. Step 3 Click Submit to save the settings. 12 To log in to the Web-based configuration utility after you change the IP address successfully, you need to launch the Internet Explorer, and then enter the new IP address in the address bar. Ensure that the IP address of the computer is in the same network segment as that of the HG520c so that the computer can access the Web-based configuration utility. 5.5 Restoring Default Settings You can quickly restore the default settings of the HG520c by pressing the RESET button on the rear panel. To restore the default settings, press and hold the RESET button for over six seconds after the HG520c is powered on, and then release the button. In addition, you can restore the default settings of the HG520c through the Web-based configuration utility. To restore the default settings through the Web-based configuration utility, do as follows: Step 1 Log in to the Web-based configuration utility, and then choose Tools > Reboot in the navigation tree to display the reboot page. Step 2 Select Factory Default Settings. Step 3 Click Restart. After the preceding operations, the current page jumps to the login page. You can log in to the Web-based configuration utility by entering the default user name and password that are admin. 6 FAQs How can I quickly enable or disable the wireless network function? Press and hold the WLAN button for over one second, and then release the button to enable or disable the wireless network function. The WLAN indicator shows whether the wireless network function is enabled. How can I quickly restore the default settings of the terminal? To restore the default settings, press and hold the RESET button on the rear panel for over six seconds after the HG520c is powered on, and then release the button. What can I do if I cannot access the Internet through the terminal? Step 1 Check whether the POWER indicator on the terminal is solid on. If the POWER indicator is off, perform further checks as follows: 1. Ensure that the terminal is turned on. 2. Ensure that electricity comes from the socket and that the power input from the socket meets the requirements described on the label of the 13 terminal power adapter. If the voltage is unsteady, for example, if the voltage is too high or too low, do not use the terminal. Wait until the voltage restores to its normal level, and then use the terminal. 3. Ensure that the terminal is properly connected to the socket through the power adapter. If the POWER indicator is still off, contact an authorized maintenance center. Step 2 After powering on the terminal, wait for about three minutes. Then, check whether the ADSL indicator on the terminal is solid on. If the ADSL indicator blinks for a long time, perform further checks as follows: 1. Ensure that telephone lines are properly connected. Pay special attention to the connections between the telephone lines and the splitter. 2. Ensure that the terminal or telephone lines are far from the electric appliances that generate strong magnetic or electric fields. Replace telephone lines when necessary. If the ADSL indicator still blinks and does not turn solid on, contact your network operator. Step 3 Check whether the LAN indicator of the terminal is on. If the LAN indicator is off, perform further checks as follows: 1. Ensure that the network adapter of the computer is enabled. 2. Ensure that the network cable between the terminal and the computer is properly connected. Remove and then insert the network cable or replace the network cable when necessary. If the LAN indicator is still off, contact an authorized maintenance center. Step 4 Check whether the driver for the network adapter is properly installed. Take a computer that runs Windows XP as an example. To check whether the driver for the network adapter is installed, do as follows: 1. On the desktop, right-click My Computer, and then choose Manage. 2. In the navigation tree of the Computer Management window, choose Device Manager. 3. In the right pane of the Computer Management window, click Network adapters to view the information about the network adapter of the computer. If no network adapter is found or if a question mark (?) or an exclamation mark (!) is displayed next to the icon of the network adapter, you can infer that the driver for the network adapter is not properly installed. In this case, re-install the driver for the network adapter of the computer. 14 Step 5 Ensure that you have entered the correct user name and user password that are required by the PPP dial-up software. The user name and the user password are provided by your network operator. Step 6 Check whether you can use the PPP dial-up software to dial successfully. If you cannot use the PPP dial-up software to dial successfully, perform further checks as follows: 1. Stop the PPP dial-up software and then power off the terminal. After five minutes, power on the terminal, and then use the PPP dial-up software to dial again. 2. Restore the default settings of the terminal. If the problem persists, contact your network operator. Step 7 Check whether the proxy server of the Web browser is correctly configured. Take the Internet Explorer installed on a computer that runs Windows XP as an example. To check whether the proxy server of the Web browser is correctly configured, do as follows: 1. 2. 3. 4. Launch the Internet Explorer. Choose Tools > Internet Options. In the Internet Options dialog box, click the Connections tab. In the Local Area Network (LAN) settings group box, click LAN Settings. 5. In the Proxy server group box of the Local Area Network (LAN) Settings dialog box, ensure that the Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). check box is cleared. Step 8 Try to access multiple Web sites to check whether the terminal can access these Web sites. If the terminal still cannot access Web sites, contact your network service provider. What can I do if Web pages often cannot be displayed during Web page browsing and can be displayed after the terminal is restarted? Step 1 Ensure that the terminal and other devices, such as telephones or fax machines, are connected to telephone lines through a splitter. For details about how to install a splitter, see the related description in the manual. Step 2 Ensure that telephone lines are properly connected. If the telephone lines are improperly connected, the stability of the network connection is affected. 15 Step 3 Check the positions of your terminal and your computer. Ensure that they are far from electric appliances, such as microwave ovens, refrigerators, or cordless telephones, that generate strong magnetic or electric fields. If the problem persists, contact your service provider. What can I do if sometimes the terminal cannot access the Internet through a WLAN connection or if the WLAN connection is unsteady? Step 1 Check the positions of your terminal and your computer. Ensure that they are far from the electric appliances, such as microwave ovens, refrigerators, or cordless telephones, that generate strong magnetic or electric fields. Step 2 Place your terminal in an open area. Although radio signals can pass through obstacles, the transmission effects of WLAN radio signals are affected if radio signals pass through too many obstacles, such as cement or wooden walls. Step 3 Place your computer close to your terminal. If your computer is far from your terminal, the effects of the WLAN are affected. Step 4 Place your terminal and computer in another direction. Step 5 Do not use your terminal to access the WLAN during thunderstorms. After a broadband terminal is installed, does Internet access degrade call quality or do telephone calls lower the Internet access rate? No. The terminal uses the frequency division multiplexing (FDM) and splitter technologies to separate voice signals from data signals. Although the two types of signals are transmitted through one telephone line, they are carried by different frequency bands. Therefore, they do not interfere with each other. In this case, you can make a telephone call and access the Internet simultaneously, without degrading call quality or lowering the Internet access rate. 16 7 Appendix 7.1 Indicators Indicator Status Description POWER Solid on The HG520c is powered on. Off The HG520c is powered off. Blinking The HG520c is being activated. ADSL INTERNET Solid on The HG520c is activated. Off The HG520c is powered off. Blinking Solid on Off WLAN Blinking Solid on LAN1–LAN4 The HG520c works in routing mode. The WAN connection is set up. Data is being transmitted. The HG520c works in routing mode. The WAN connection is set up. No data is being transmitted. The HG520c works in bridge mode or in routing mode. No WAN connection is set up. The wireless network function is enabled. Data is being transmitted through the WLAN. The wireless network function is enabled. No data is being transmitted through the WLAN. Off The wireless network function is disabled. Blinking Data is being transmitted through the Ethernet interface. Solid on The Ethernet connection is set up. Off The Ethernet connection is not set up. 17 7.2 Interfaces and Buttons Interface or Button Description POWER It is used to connect the power adapter. LAN1–LAN4 It is used to connect to the Ethernet interface on the computer. RESET You can press and hold the RESET button for over six seconds to restore the default settings of the HG520c. Note: After you restore the default settings, your customized data is lost. Therefore, use this function with caution. ADSL It is used to connect to the MODEM interface on the splitter. WLAN It is used to enable or disable wireless network function quickly. ON/OFF It is the power switch and is used to power on or power off the HG520c. 7.3 Default Settings Parameter Setting IP address of the LAN interface 192.168.1.1 Subnet mask of the LAN interface 255.255.255.0 User name used for logging in to the Web-based configuration utility admin Password used for logging in to the Web-based configuration utility admin DHCP server function Enable Wireless network function Enable 7.4 Technical Specifications Item Specification Power supply for the HG520c 12 V DC, 0.5 A Power consumption ≤6W 18 Item Specification Ambient temperature for operation 0°C to 40°C Relative humidity for operation 5% to 95% (non-condensing) Dimensions (L × W × H) 164 mm × 142 mm × 49 mm Weight About 300 g Standards ADSL standards DSL transmission rates Wireless transmission rates ITU G.992.1 (G.dmt) Annex A ITU G.994.1 (G.hs) ANSI T1.413 Issue 2 ADSL2 standard ITU G.992.3 (G.dmt.bis) Annex A ITU G.992.3 Annex M ADSL2+ standard ITU G.992.5 Annex A ITU G.992.5 Annex M WLAN standard 802.11b and 802.11g G.dmt T1.413 G.992.5 (ADSL2+) 802.11b 1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, and 11 Mbit/s 802.11g 1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, 6 Mbit/s, 11 Mbit/s, 12 Mbit/s, 18 Mbit/s, 24 Mbit/s, 36 Mbit/s, 48 Mbit/s, and 54 Mbit/s 19 Maximum downlink rate: 8 Mbit/s Maximum uplink rate: 896 kbit/s Maximum downlink rate: 24 Mbit/s Maximum uplink rate: 1024 kbit/s HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com Part Number: 202139
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2009:05:14 09:18:53+08:00 Modify Date : 2009:05:15 12:20:21+08:00 Page Count : 25 Tagged PDF : Yes Has XFA : No XMP Toolkit : 3.1-701 Metadata Date : 2009:05:15 12:20:21+08:00 Creator Tool : Acrobat PDFMaker 7.0 for Word Format : application/pdf Title : Creator : . Document ID : uuid:6bf9c815-f6b5-4474-914c-707b1808f27c Instance ID : uuid:ef1e1a58-d69d-48bf-b67f-0213a6a836cb Producer : Acrobat Distiller 7.0 (Windows) Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools