Huawei Technologies HG532D 300Mbps Wireless ADSL2+ Router, Home Gateway User Manual user manuel

Huawei Technologies Co.,Ltd 300Mbps Wireless ADSL2+ Router, Home Gateway user manuel

Contents

user manuel

HG532d 300Mbps Wireless ADSL2+ Router User Guide HUAWEI TECHNOLOGIES CO., LTD.
HG532d 300Mbps Wireless ADSL2+ Router User Guide V100R001 User Guide Issue 01 Date 2012-12-31 Part Number 202563 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: mobile@huawei.com
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS’’. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.
Contents 1 Warnings and Precautions ............................................................ 1 2 Connecting the Cables and Getting Started ................................... 8 2.1 Connecting Cables ........................................................................ 8 2.2 Powering On the HG532d ............................................................. 9 3 Setting Network Access Parameters .............................................. 9 3.1 Logging In to the Web-Based Configuration Utility ......................... 9 3.2 Configuring a Wireless Account ................................................... 10 3.3 Configuring a Dial-Up Connection for Internet Access................... 10 4 Setting Up a Wireless Connection ............................................... 11 4.1 Setting Up a Wireless Connection Using the WPS Button .............. 12 4.2 Setting Up a Wireless Connection Manually.................................. 12 5 Configuring the HG532d ............................................................ 14 5.1 Changing the User Name and Password for the Web-Based Configuration Utility ......................................................................... 14 5.2 Enabling or Disabling the Wireless Network Function ................... 14 Using the WLAN Button ............................................................ 14 Using the Web-Based Configuration Utility .................................. 15 5.3 Changing the Wireless Network Name and Password ..................... 15 5.4 Restoring Default Settings ........................................................... 16 5.5 Restarting the HG532d ................................................................ 16 6 FAQs ......................................................................................... 17 7 Technical Specifications .............................................................. 23 7.1 Indicators .................................................................................. 23 7.2 Ports and Buttons ..................................................................... 25 7.3 Default Settings ........................................................................ 26 7.4 Product Specifications .............................................................. 26
1 1 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories. Basic Requirements  During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects.  Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair.  Without authorization, no organization or individual can change the mechanical, safety, or performance design of the device.  When using the device, observe all applicable laws and regulations and respect the legal rights of other people. Environmental Requirements for Using the Device  Before connecting and disconnecting cables, stop using the device, and then disconnect it from the power supply. Ensure that your hands are dry during operation.  Keep the device far from sources of heat and fire, such as a heater or a candle.  Keep the device far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator.  Place the device on a stable surface.  Place the device in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight.  Use the device in an area with a temperature ranging from 0°C to 40°C.  Do not block the openings on the device with any object. Reserve a minimum space of 10 cm around the device for heat dissipation.  Do not place any object (such as a candle or a water container) on the device. If any foreign object or liquid enters the device, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center.
2  During thunderstorms, power off the device, and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes. Precautions for Using Wireless Devices  When using the device, ensure that the antenna of the device is at least 20 cm away from all persons.  Do not use the device where using wireless devices is prohibited or may cause interference or danger.  The radio waves generated by the device may interfere with the operation of electronic medical devices. If you are using any electrical medical device, contact its manufacturer for the restrictions on the use of the device.  Do not take the device into operating rooms, intensive care units (ICUs), or coronary care units (CCUs). Areas with Inflammables and Explosives  Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols.  Do not store or transport the device in the same box as inflammable liquids, gases, or explosives. Accessory Requirements  Use only the accessories supplied or authorized by the device manufacturer. Otherwise, the performance of the device may get affected, the warranty for the device or the laws and regulations related to telecommunications terminals may become null and void, or an injury may occur.  Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires may occur.  Ensure that the power adapter meets the specifications indicated on the device nameplate.  Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and it is tested and approved according to national or local standards.  For pluggable device, the socket-outlet shall be installed near the device and shall be easily accessible.
3 Safety of Children Keep the device and its accessories out of the reach of children. Otherwise, they may damage the device and its accessories by mistake, or they may swallow the small components of the device, causing suffocation or other dangerous situations. Maintenance  If the device is not used for a long time, power it off, and then remove all the cables connected to it.  If any exception occurs, for example, if the device emits any smoke or unusual sound or smell, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center.  Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged, causing malfunction of the device.  Before cleaning the device, stop using it, power it off, and then remove all the cables connected to it.  Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent or spray to clean the device shell. Disposal and Recycling Information This symbol (or without a solid bar) on the device, and/or on its packaging, and on its batteries where included, indicates that the device including its electrical accessories (e.g. headset, adapter, cable) and the batteries should not be disposed of as normal household garbage. These items should not be disposed as unsorted municipal waste and should be handed over to a certified collection point for recycling or proper disposal at the end of their life. For more detailed information about the recycling of the device or batteries, please contact your local city office, the household waste disposal service, or the retail store where you purchased it/them. Disposal of the device and batteries if included is subject to WEEE Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose for separating WEEE and batteries from other waste is to minimize the potential environmental impacts on human health of any hazardous substances that may be present.
4 Reduction of Hazardous Substances This device is compliant with the REACH Regulation [Regulation (EC) No 1907/2006] and RoHS Directive Recast (Directive 2011/65/EU). Batteries where included are compliant with Battery Directive (Directive 2006/66/EC). For more information about the REACH and RoHS compliance of the device, please visit the Web site www.huaweidevice.com/certification. You are recommended to visit the Web site regularly for up-to-date information. EU Regulatory Conformance This device should be installed and operated with a minimum distance of 20 cm between the antenna and all persons. Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този уред съответства на основните изисквания и другите разпоредби на Директива 1999/5/EC. Česky: Huawei Technologies Co., Ltd., tímto prohlašuje, že toto zařízení je ve shodě se základními požadavky a dalšími souvisejícími opatřeními směrnice 1999/5/EC. Dansk: Huawei Technologies Co., Ltd. erklærer hermed at denne enhed er i overensstemmelse med de obligatoriske krav og andre relevante bestemmelser i direktiv 1999/5/EF. Nederlands: Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EC. English: Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Eesti: Käesolevaga kinnitab Huawei Technologies Co., Ltd., et see seade vastab Direktiivi 1999/5/EÜ põhinõudmistele ja teistele asjakohastele määrustele. Suomi: Huawei Technologies Co., Ltd. vakuuttaa täten, että tämä laite on yhdenmukainen direktiivin 1999/5/EY olennaisten vaatimusten ja direktiivin muiden asiaankuuluvien lausumien kanssa. Français (Européen): Le fabricant déclare que ce produit est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Deutsch: Huawei Technologies Co., Ltd. erklärt hiermit, dass dieses Produkt die erforderlichen Bestimmungen und andere relevante Verordnungen der Richtlinie 1999/5/EG einhält. Ελληνικά: Δια της παρούσης η Huawei Technologies Co., Ltd. δηλώνει ότι αυτή η συσκευή συμμορφώνεται με τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις της οδηγίας 1999/5/Ε.Κ.
5 Magyar: Jelen nyilatkozaton keresztül a Huawei Technologies Co., Ltd. kijelenti, hogy a készülék megfelel az EC/5/1999 Irányelv összes lényeges követelményének és vonatkozó előírásának. Gaeilge: Fograíonn Huawei Technologies Co., Ltd leis seo go bhfuil an fheiste seo i gcomhlíonadh leis na fíor-riachtanais agus na forálacha eile maidir le Treoir 1999/5/AE. Italiano: Col presente documento, Huawei Technologies Co., Ltd. dichiara che questo dispositivo è conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 1999/5/CE. Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Direktīvas 1999/5/EC pamatprasībām un piemērojamajiem nosacījumiem. Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka Direktyvos 1999/5/EC pagrindinius reikalavimus ir taikomas sąlygas. Malti: Hawnhekk, Huawei Technologies Co., Ltd. tiddikjara li dan it-tagħmir hu konformi mal-ħtiġijiet essenzjali u provvedimenti rilevanti oħrajn ta’ Direttiva 1999/5/KE. Polski: Wymieniona w tym dokumencie firma Huawei Technologies Co., Ltd. deklaruje, że niniejsze urządzenie spełnia zasadnicze wymagania w zakresie zgodności oraz inne odnośne postanowienia Dyrektywy 1999/5/EC. Português (Europeu) : Deste modo, a Huawei Technologies Co., Ltd. declara que este dispositivo está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/CE. Română: Prin prezenta Huawei Technologies Co., Ltd. declară că acest dispozitiv este conform cu cerinţele esenţiale şi alte prevederi relevante ale directivei 1999/5/CE. Slovenčina: Huawei Technologies Co., Ltd. týmto vyhlasuje, že zariadenie je v súlade so základnými požiadavkami a inými relevantnými predpismi Smernice 1999/5/ES. Slovenščina: Huawei Technologies Co., Ltd. izjavlja, da je ta naprava v skladu z bistvenimi zahtevami in drugimi ustreznimi določbami Direktive 1999/5/ES. Español (Europeo) : Con el presente documento, Huawei Technologies Co., Ltd. declara que este dispositivo cumple con los requisitos esenciales y con las demás disposiciones correspondientes de la Directiva 1999/5/CE. Svenska: Huawei Technologies Co., Ltd. förklarar härmed att denna produkt överensstämmer med de grundläggande kraven och andra relevanta föreskrifter i direktiv 1999/5/EG. For the declaration of conformity, visit the Web site www.huaweidevice.com/certification.
6 Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU). Notice: This device can be operated in all European countries. Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
7 Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC - PART 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:HAUDL01BHG532d. If requested, this number must be provided to the telephone company. This equipment uses the following USOC jacks: RJ11C. REN (RINGER EQUIVALENT NUMBERS) STATEMENT Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. ATTACHMENT LIMITATIONS STATEMENT Notice: This equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). This is confirmed by marking the equipment with the Industry Canada certification number. The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
8 2 Connecting the Cables and Getting Started Thank you for purchasing the HG532d Home Gateway (hereinafter referred to as the HG532d). 2.1 Connecting Cables The following figure shows an example of how to connect the cables. In this example, the HG532d is connected to a desktop computer, a laptop computer, and a telephone. 1. Telephone wall jack 2. Power adapter 3. Desktop computer 4. Laptop computer 5. Telephone 6. Splitter a. MODEM port b. PHONE port c. LINE port
9 2.2 Powering On the HG532d After connecting the cables, press the On/Off button on the panel to power on the HG532d. The ADSL indicator lights up and starts blinking. This indicates that the asymmetric digital subscriber line (ADSL) port activation is in progress. The blinking may last from 40 seconds to 3 minutes. When the ADSL indicator stops blinking and remains on, indicates that the HG532d is working correctly. To power off the HG532d, press the On/Off button on the side panel, and then unplug the power adapter. 3 Setting Network Access Parameters 3.1 Logging In to the Web-Based Configuration Utility Most parameters of the HG532d are preset before delivery to meet common application scenarios at home. To check the HG532d's working status or to configure certain advanced network functions, use the web-based configuration utility. To log in to the web-based configuration utility: Step 1 Launch a browser on your computer. Enter http://192.168.1.1 in the address box, and press Enter. Step 2 On the login page, enter your user name and password.  By default, both the user name and password are user.  For security reasons or to make the user name and password easy to remember, you can change them. For details, see section 4.1 "Changing the User Name and Password for the Web-Based Configuration Utility". Step 3 Click Login. After verification, the web-based configuration utility is displayed.
10 The first time you log in to the web-based configuration utility, a configuration wizard is displayed. To skip the wizard and further configure your HG532d, click Here when the following message displays: Click Here to enter the advanced configuration page. 3.2 Configuring a Wireless Account The configuration wizard page is displayed when wireless parameters have not been modified. To set the user name and password for wireless connection on the wizard page, do as follows: Step 1 Log in to the web-based configuration utility. Step 2 On the Quick Configure Home Gateway: Wireless Network page, set WLAN SSID and Key, and click Next. After you set WLAN SSID and Key, the home page of the web-based configuration utility is displayed. A navigation menu is displayed on the left. You can click a link to display the relevant page on the right. 3.3 Configuring a Dial-Up Connection for Internet Access The HG532d works in bridge mode by default. To set up a dial-up connection for Internet access, you must install and configure PPP dial-up software. The following example uses a computer running the Windows XP operating system to describe how to set up a dial-up connection:  Check the label on the HG532d's rear panel for WLAN SSID and Key.  The preceding configuration needs to be performed only once. You can also configure the WLAN SSID and Key by choosing Basic > WLAN. For details, see section 4.3 "Changing the Wireless Network Name and Password".  For security reasons or to make the wireless network name password easy to remember, you can change them. For details, see section 4.3 "Changing the Wireless Network Name and Password”.
11 Step 1 Choose Start > All Programs > Accessories > Communications > Network Connections. Step 2 In Network Tasks, click Create a new connection. In the New Connection Wizard window, click Next. Step 3 Select Connect to the Internet, and click Next. Step 4 Select Set up my connection manually, and click Next. Step 5 Select Connect using a broadband connection, and click Next. Step 6 In ISP Name, enter a name for the dial-up connection, and click Next. Step 7 Select Anyone's use or My use only, and click Next. Step 8 Enter the user name and password provided by your operator for dial-up connections, and click Next. Step 9 Select Add a shortcut to this connection to my desktop, and click Finish. The preceding steps need to be performed only once. After you complete the procedure, a dial-up connection icon will appear on your computer desktop. To connect to the Internet, double-click the dial-up connection icon, and click Connect in the dialog box. 4 Setting Up a Wireless Connection If a wireless network adapter is available on your computer, you can connect your computer to the HG532d over a wireless connection. The method for installing the wireless adapter and its driver varies according to different vendors. For details, see the installation guide provided by the vendor of your wireless adapter. The wireless network function is enabled on the HG532d before delivery. To check the function status, see section 4.2 "Enabling or Disabling the Wireless Network Function". There are two methods for setting up a wireless connection between the HG532d and your computer.
12 4.1 Setting Up a Wireless Connection Using the WPS Button The HG532d supports the Wi-Fi Protected Setup (WPS) function in Push Button Configuration (PBC) mode. If your wireless network adapter also supports the WPS function, do the following to connect your computer to the HG532d wirelessly: Step 1 Press and hold the WPS button for over 1 second on the side panel of the HG532d. The WPS indicator on the HG532d starts blinking, indicating that the HG532d is in the WPS negotiation state. Step 2 Within 2 minutes, enable the WPS negotiation function on the computer. Wait for a while. The WPS indicator of the HG532d stops blinking and remains on, indicating that a wireless connection is set up between the HG532d and the computer.  You need to wait for 10 seconds to 120 seconds.  The WPS indicator is on for about 300 seconds, and then turns off. 4.2 Setting Up a Wireless Connection Manually If your network adapter does not support the WPS function, you can set up a wireless connection manually. The following example uses a computer running the Windows XP operating system to describe how to set up a wireless connection using the default wireless network name and password: Step 1 Start the wireless configuration service of the Windows XP operating system as follows: 1. Right-click My Computer to display a short-cut menu, and choose Manage. 2. In the Computer Management window, choose Computer Management (Local) > Services and Applications > Services.
13 3. Right-click Wireless Zero Configuration to display a shortcut menu, and choose Properties. 4. Check that Service status is Started. If Service status is not Started, click Start. 5. Click OK to close the dialog box, and then close the Computer Management window. Step 2 Find the wireless network name (SSID) and its password (WLAN Key) printed on the label on the HG532d's rear panel. Step 3 Configure the wireless network connection on the computer as follows: 1. Choose Start > All Programs > Accessories > Communications > Network Connections. 2. In the Network Connections window, right-click Wireless Network Connection to display a shortcut menu, and choose Properties. 3. In the Wireless Network Connection Properties dialog box, click the Wireless Networks tab. 4. Select Use Windows to configure my wireless network settings. 5. Click View Wireless Networks. 6. In the Wireless Network Connection dialog box, select the wireless network whose name is the same as the one you recorded in Step 2, and click Connect. 7. In the dialog box, enter the password you recorded in Step 2, and click Connect. After the system verifies the password, Connected appears on the wireless network icon in the wireless network list, indicating that your computer has established a wireless connection to the HG532d. 8. Close the Wireless Network Connection dialog box. You need to set up a wireless connection only once. Then you can access the wireless network anytime you want as long as that the wireless network name and password are not changed. When the HG532d is working properly, your computer connects to the HG532d automatically after its wireless function is enabled.
14 5 Configuring the HG532d 5.1 Changing the User Name and Password for the Web-Based Configuration Utility For security reasons or to make the password easy to remember, you can change the user name and password for the web-based configuration utility. To change the user name and password for login: Step 1 Log in to the web-based configuration utility. Step 2 Choose Maintenance > Account to display the user information management page. Step 3 Enter a new user name, your current password, and a new password. Re-enter the new password to confirm it. Step 4 Click Submit. After the user name and password are changed, the login page is displayed. Enter your new user name and password to log in. If you forget the password, you can restore the default settings by pressing and holding the Reset button on the rear panel of the HG532d for over 6 seconds. The user name and password used for logging in to the web-based configuration utility are then restored to their default values. After the HG532d is restored to its default settings, all user customized data will be lost. Use this function only when necessary. 5.2 Enabling or Disabling the Wireless Network Function There are two methods for enabling or disabling the wireless network function. Using the WLAN Button To enable or disable the wireless network function, press the WLAN button on the side panel of the HG532d. The WLAN indicator indicates the status of the wireless network function.
15 Using the Web-Based Configuration Utility To enable or disable the wireless network function from the web-based configuration utility: Step 1 Log in to the web-based configuration utility. Step 2 Choose Basic > WLAN. Step 3 Click the WLAN tab. Step 4 Select Enable WLAN.  Select Enable WLAN to enable the wireless network function.  Clear Enable WLAN to disable the wireless network function. Step 5 Click Submit. 5.3 Changing the Wireless Network Name and Password The default wireless network encryption mode is WPA-PSK/WPA2-PSK. You can find the wireless network name (SSID) and password (WLAN Key) printed on the label on the HG532d's rear panel. To change the wireless network name and its password: (This example uses WPA-PSK/WPA2-PSK encryption mode.) Step 1 Log in to the web-based configuration utility. Step 2 Choose Basic > WLAN. Step 3 Click the WLAN tab. Step 4 Select Enable WLAN. Step 5 In SSID, enter a wireless network name. Step 6 For Security, select WPA-PSK/WPA2-PSK. In WPA pre-shared key, enter a password. Use the default settings for other parameters. Step 7 Click Submit. You must remember the wireless network name and password you set. You will be prompted to enter this password when connecting wireless devices, such as a computer, to the HG532d's wireless network. Connection to the HG532d's wireless network fails if you enter an incorrect password.
16 5.4 Restoring Default Settings If you restore the HG532d to its default settings, all customized user data will be lost. Use this function only when necessary. To restore the HG532d to its default settings, power on the HG532d, press and hold the Reset button on the rear panel for over 6 seconds, and then release the button. You can also do the following to restore the HG532d to its default settings from the web-based configuration utility: Step 1 Log in to the web-based configuration utility. Step 2 Choose Maintenance > Device. Step 3 Click the Reset tab. Step 4 Click Restore Default Settings. Step 5 In the displayed dialog box, click OK. After the preceding steps, the login page is displayed. You can enter the default user name (user) and password (user) to log in. 5.5 Restarting the HG532d To restart the HG532d: Step 1 Log in to the web-based configuration utility. Step 2 Choose Maintenance > Device. Step 3 Click the Reset tab. Step 4 Click Reboot. Step 5 In the displayed dialog box, click OK. If you forget the wireless network name and its password, log in to the web-based configuration utility, and set a new name and password. Alternatively, you can restore the HG532d to its default settings. The name and password are then restored to the values printed on the label on the HG532d's rear panel.
17 6 FAQs How can I quickly enable or disable the wireless network function? Press and hold the WLAN button for over 1 second, and then release the button. The WLAN indicator indicates the status of the wireless network function. How can I quickly restore the HG532d to its default settings? To restore the HG532d to its default settings, press and hold the Reset button on the HG532d's rear panel for over 6 seconds when the HG532d is powered on, and then release the button. What can I do if I cannot access the Internet? Step 1 Check that the Power indicator on the HG532d is steady on. If the Power indicator is off, perform further checks as follows: 1. Check that the HG532d is turned on. 2. Check that electricity comes from the socket and that the power input from the socket meets the requirements described on the label of the HG532d's power adapter. If the voltage is unstable, for example, if the voltage is too high or too low, do not use the HG532d. Wait until the voltage recovers, and then use the HG532d. 3. Check that the HG532d is securely connected to the socket using its power adapter. If the Power indicator is still off, contact an authorized maintenance center. Step 2 After powering on the HG532d, wait for about 3 minutes. Then check whether the ADSL indicator turns steady on. If the ADSL indicator is off, perform further checks as follows: 1. Check that the telephone line is correctly and securely connected, especially the connection between the telephone line and the splitter. 2. Check that the HG532d and telephone line are located far from any electric appliances that generate strong magnetic or electric fields. Replace the telephone line when necessary. If the ADSL indicator is still off, contact your network service
18 provider. Step 3 Check whether the LAN indicator is on. If the LAN indicator is off, perform further checks as follows: 1. Check that the network adapter on your computer is enabled. 2. Check that the network cable between the HG532d and the computer is securely connected. Remove and then insert the network cable or replace the network cable when necessary. If the LAN indicator is still off, contact an authorized maintenance center. Step 4 Check that the driver for the network adapter is correctly installed. The following example uses a computer running the Windows XP operating system to check whether the driver for the network adapter is installed: 1. Right-click My Computer, and choose Manage from the displayed shortcut menu. 2. In the Computer Management window, click Device Manager. 3. In the right pane of the Computer Management window, click Network adapters. If no network adapter is found or if a question mark (?) or an exclamation mark (!) is displayed next to the network adapter icon, the driver for the network adapter is not correctly installed. Re-install the driver. Step 5 Check that PPP dial-up software is installed and parameters are set correctly. For details about parameter settings, see the user guide for the PPP dial-up software. Step 6 Check that you have entered the correct user name and password required by the PPP dial-up software. The user name and password are provided by your network service provider. Step 7 Check that you can use the PPP dial-up software to set up dial-up connection. If the dial-up connection fails, perform further checks as follows: 1. Close the PPP dial-up software, and power off the HG532d. After 5
19 minutes, power on the HG532d, and use the PPP dial-up software to dial again. 2. Restore the HG532d to its default settings. If the problem persists, contact your network service provider. Step 8 Check that the proxy server of the browser is correctly configured. The following example uses Internet Explorer on the Windows XP operating system to check whether the proxy server of the browser is correctly configured: 1. Launch Internet Explorer. 2. Choose Tools > Internet Options. 3. In the Internet Options dialog box, click the Connections tab. 4. In the Local Area Network (LAN) settings area, click LAN Settings. 5. In the Proxy server area of the Local Area Network (LAN) Settings dialog box, check that the Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). check box is cleared. Step 9 Try to access more websites to check whether the HG532d can access these websites. If the problem persists, contact your network service provider. What can I do if I cannot access the web-based configuration utility? Step 1 Refer to "What can I do if I cannot access the Internet?" to check that the power supply, telephone line, and network line are working properly. Step 2 Check that the computer's IP address and the HG532d's LAN IP address are in the same network segment, and that the browser is not using a proxy server. To ensure that the computer's IP address and the HG532d's LAN IP address are in the same network segment, you can set the computer to obtain an IP address automatically. Step 3 Check that the correct user name and password are used to log in to the web-based configuration utility. If the problem persists, restore the HG532d to its default settings.
20 For details, see "How can I quickly restore the HG532d to its default settings?" What can I do if I cannot access the Internet over a wireless connection? Step 1 Check that all cables are securely connected, such as the power adapter cable and the telephone line. Step 2 Check whether the WLAN indicator is on. If the WLAN indicator is off, the wireless network function is disabled, and you need to turn on the wireless network function. Step 3 Read the user guide of the wireless network adapter, and check whether the wireless network adapter supports the 802.11b, 802.11g, or 802.11n protocol. If the wireless network adapter does not support any of the preceding protocol, replace it. Step 4 Check whether the driver for the wireless network adapter is correctly installed. If the driver is not correctly installed, re-install it using the driver program provided with the wireless network adapter. Step 5 Check whether the computer receives wireless signals properly. The following example uses the computer running the Windows XP operating system to check wireless signal reception: 1. Choose Start > Control Panel. Double-click Network Connections. 2. In the Network Connections window, right-click Wireless Network Connection, and choose View Available Wireless Networks. If the computer cannot find the wireless network, move the computer closer to the HG532d. Check that there are no obstacles, such as walls, between the computer and the HG532d. Step 6 Check whether the computer is connected to the HG532d's wireless network. On the wireless network list, check whether the HG532d's wireless network is displayed as Connected. Step 7 Check that PPP dial-up software is installed and parameters are set correctly. Step 8 Check that you can use the PPP dial-up software to set up dial-up
21 connection. Step 9 Try to access more websites to check whether the HG532d can access these websites. If you still cannot access the websites, restore the HG532d to its default settings. If the problem persists, contact your network service provider. What can I do if sometimes the terminal cannot access the Internet over a wireless connection or if the wireless connection is unstable? Step 1 Check the positions of the HG532d and the computer. Ensure that they are located far from the electric appliances such as microwave ovens, refrigerators, or cordless telephones that generate strong magnetic or electric fields. Step 2 Place the HG532d in an open area. Although radio signals can pass through obstacles, their transmission is affected if they pass through too many obstacles such as walls. Step 3 Move the computer closer to the HG532d. Step 4 Place the HG532d and the computer in another direction. Step 5 Try to avoid using wireless network connection during thunderstorms. What can I do if the wireless network is not encrypted but the computer cannot connect to the wireless network? Step 1 Delete wireless network configuration from the computer. The following example uses a computer running the Windows XP operating system: 1. Choose Start > Control Panel. Double-click Network Connections. 2. In the Network Connections window, right-click Wireless Network Connection, and choose Properties. 3. In the Wireless Network Connection Properties dialog box, click the Wireless Networks tab. 4. In the Preferred Networks area, select a wireless network, and click Remove.
22 5. Delete all the other wireless network connections from the Preferred Networks area. 6. Click OK. Step 2 Set up an unencrypted wireless network connection. Does the WPS function have any special requirements on the wireless encryption settings of the HG532d? The WPS function can be used only when the security mode of the wireless network is set to WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK, and the SSID is set to SSID1. It is recommended that you set the security mode to WPA-PSK/WPA2-PSK. What can I do if I cannot set up a wireless connection between the HG532d and the computer by pressing the WPS button? Step 1 Check that only one computer tries to connect to the HG532d using the WPS function at a time. Step 2 Check that the wires network function and the WPS function in PBC mode are enabled on the HG532d. Step 3 Check that the security mode of the wireless network is set to WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK, and SSID is set to SSID1. Note that the WPS function is forcibly disabled if the wireless network uses the Wired Equivalent Privacy (WEP) encryption. Step 4 Check the positions of the HG532d and the computer. Ensure that they are far from the electric appliances such as microwave ovens, refrigerators, or cordless telephones that generate strong magnetic or electric fields. Step 5 Place the HG532d in an open area. Although radio signals can pass through obstacles, their transmission is affected if they pass through too many obstacles such as walls.
23 7 Technical Specifications 7.1 Indicators Indicator Status Description Power On The HG532d is powered on. Off The HG532d is powered off or faulty. Internet Blinking  The HG532d is working in routing mode, and it is connected to the Wide Area Network (WAN).  Data is being transmitted. On  The HG532d is working in routing mode, and it is connected to the WAN.  No data is being transmitted. Off  The HG532d is working in bridge mode.  The HG532d is working in routing mode, but it is not set up the connection to the WAN.
24 Indicator Status Description ADSL Blinking The ADSL connection is being activated. On The ADSL connection is set up and activated. Off No digital subscriber line (DSL) connection is set up, or the DSL connection is faulty. WLAN On The WLAN connection is set up, but no data is being transmitted. Blinking The WLAN connection is set up, and data is being transmitted. Off The wireless function is disabled, or the WLAN module is faulty. WPS Blinking  The HG532d is connecting to a wireless client such as a computer installed with a wireless network adapter using the WPS function.  This process lasts no longer than 120 seconds. On  A wireless connection is set up between the HG532d and a wireless client using the WPS function.  The WPS indicator is on for about 300 seconds, and then turns off. Off The WPS function is disabled or faulty. LAN1 ~ LAN4 On The HG532d is connected to a device properly. Blinking Data is being transmitted between the HG532d and the device connected. Off No connection is set up on the port.
25 7.2 Ports and Buttons No. Port or Button Description 1 ADSL DSL port used to connect to the splitter or telephone wall jack. 2 ~ 5 LAN4 ~ LAN1 Ethernet ports used to connect to devices such as a computer, telephone, set-top box, and switch. 6 Reset Restores the HG532d to its default settings. To restore the HG532d to its default settings, press and hold the Reset button for over 6 seconds. After the HG532d is restored to its default settings, all user customized data will be lost. Use this function only when necessary. 7 On/Off Powers the HG532d on or off. 8 Power Power port used to connect to the power adapter. 9 WPS Starts the WPS negotiation. 10 WLAN Enables or disables the WLAN function.
26 7.3 Default Settings Parameter Default Settings LAN IP address 192.168.1.1 LAN subnet mask 255.255.255.0 User name for web-based configuration utility login user Password for web-based configuration utility login user Wireless network name (SSID) for wireless connection See the label printed on the HG532d's rear panel. Password (WLAN Key) for wireless connection See the label printed on the HG532d's rear panel. DHCP server Enabled Wireless network Enabled Firewall function Enabled 7.4 Product Specifications Item Specifications Operating temperature 0°C to 40°C (32°F to 104°F) Operating humidity 5% to 95%, non-condensing Dimensions (H × W × D) 37mm x 181mm x 120 mm (1.46 in. x 7.13 in. x 4.72 in.), antenna excluded Weight About 360 g (Not including the power adapter)
27 Item Specifications Standards ADSL standards  ITU G.992.1 (G.dmt) Annex A  ITU G.994.1 (G.hs)  ANSI T1.413 Issue 2 ADSL2 standards  ITU G.992.3 (G.dmt.bis) Annex A  ITU G.992.3 (G.dmt.bis) Annex L  ITU G.992.3 (G.dmt.bis) Annex M ADSL2+ standards  ITU G.992.5 (G.dmt.bitplus) Annex A  ITU G.992.5 (G.dmt.bitplus) Annex M WLAN standards 802.11b, 802.11g, 802.11n (2.4 GHz) DSL transmission rates G.dmt T1.413  Downlink: up to 8 Mbit/s  Uplink: up to 896 kbit/s ADSL2  Downlink: up to 12 Mbit/s  Uplink: up to 1024 kbit/s ADSL2+  Downlink: up to 24 Mbit/s  Uplink: up to 1024 kbit/s Wireless transmission rates 802.11b mode Up to 11 Mbit/s 802.11g mode Up to 54 Mbit/s 802.11n mode (2 x 2 antenna used) Up to 300 Mbit/s
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com

Navigation menu