Huawei Technologies HG658 HOME GATEWAY User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1842018
Application ID	FA5mvU9UB3Vd4JJGtt/hVA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.54kB (756713 bits)
Date Submitted	2012-11-20 00:00:00
Date Available	2012-11-20 00:00:00
Creation Date	2012-10-24 14:29:25
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2012-10-24 14:29:52
Document Title	User Manual
Document Creator	Acrobat PDFMaker 10.0 Word 版

HG658 Home Gateway
Quick Start
1 Connecting Cables
Telephone wall jack
Power adapter
Splitter
HG658
Telephone
Set-top box
Laptop computer
Desktop computer
LINE port
MODEM port
PHONE port
2 Powering On the HG658
Press the On/Off button on the side panel to power on the HG658.
After you power on the HG658, the WAN indicator light blinks (for less than three minutes),
indicating that the HG658 is being activated. Once activated, the WAN indicator light stops
blinking and remains steady on. The Power indicator light also remains steady on, indicating
that the HG658 is working properly.
3 Accessing the Internet
To set up network access for the HG658 and your computer:
Step 1 Open a web browser on your computer. Enter http://192.168.1.1 in the address box,
and then press Enter.
Step 2 On the login page, enter the user name (user by default) and password (HuaweiUser
by default).
Step 3 Click Login.
After the system verifies your account, the web-based configuration utility is
displayed.
The first time you log in to the web-based configuration utility, a setup wizard
is displayed. To skip the wizard and go immediately to the HG658
configuration page, click Advance.
Step 4 In the displayed setup wizard, click Next.
If you have configured the HG658 before and you log in to the web-based
configuration utility, the setup wizard page will not be displayed. However,
you can still click Setup Wizard in the upper right corner to display the
setup wizard page.
Step 5 Set WAN device based on your network type, and then enter the user name and
password that are provided by your Internet Service Provider (ISP) in the User name
and Password text boxes.
Step 6 Click Next.
Step 7 Set SSID and WPA pre-shared key, and then click Next.
Check the label on the HG658's rear panel for SSID and WPA pre-shared
key.
Step 8 Click Submit.
After you complete the preceding settings, you can start surfing the Internet.
You need to perform the preceding operations on a computer only once. The next time you
power on your computer, you can start surfing the Internet without any further configurations.
4 Setting Up a Wireless Connection
The following example uses a computer running the Windows 7 operating system to describe
how to set up a wireless connection:
Step 1 Start the wireless configuration service of the Windows 7 operating system as
follows:
1. Click Start, enter services.msc in the search box, and then press Enter.
2. In the Services window, right-click WLAN AutoConfig to display a shortcut
menu, and then choose Properties.
3. Check that Service status is Started. If Service status is not Started, click Start.
4. Click OK to close the dialog box. Then close the Services window.
Step 2 Find WLAN Name and WLAN Key printed on the label of the HG658's rear panel.
Step 3 Configure the wireless network connection on the computer as follows:
1. Choose Start > Control Panel > Network and Sharing Center > Change
adapter settings.
2. In the Network Connections window, right-click the wireless network you
created to display a shortcut menu, and then choose Connect/Disconnect.
3. In the Wireless Network Connection dialog box, select the wireless
network whose name is the same as the one you recorded in Step 2, and then click
Connect.
4. n the Connect to Network dialog box, enter WLAN Key that you recorded in
Step 2, and then click OK.
After the system verifies the password, Connected appears on the wireless network
icon in the wireless network list, indicating that your computer has established
a wireless connection to the HG658.
For more information, visit http://www.huaweidevice.com to download the
HG658 user guide. Enter HG658 in the search box to find the user guide.
5 Warnings and Precautions
To use the device properly and safely, read these warnings and precautions carefully and
strictly observe them during operation. Unless otherwise specified, the term "device" refers to
the device and its accessories.
Basic Requirements
 During storage, transportation, and operation of the device, keep it dry and prevent it from
colliding with other objects.
 Do not dismantle the device. In case of any fault, contact an authorized service center for
assistance or repair.
 Without authorization, no organization or individual can change the mechanical, safety, or
performance design of the device.
 When using the device, observe all applicable laws and regulations and respect the legal
rights of other people.
Environmental Requirements for Using the Device
 Before connecting and disconnecting cables, stop using the device, and then disconnect it
from the power supply. Ensure that your hands are dry during operation.
 Keep the device far from sources of heat and fire, such as a heater or a candle.
 Keep the device far from electronic appliances that generate strong magnetic or electric
fields, such as a microwave oven or a refrigerator.
 Place the device on a stable surface.
 Place the device in a cool and well-ventilated indoor area. Do not expose the device to
direct sunlight.
 Use the device in an area with a temperature ranging from 0°C to 40°C.
 Do not block the openings on the device with any object. Reserve a minimum space of 10
cm around the device for heat dissipation.
 Do not place any object (such as a candle or a water container) on the device. If any foreign
object or liquid enters the device, stop using the device immediately, power it off, remove
all the cables connected to it, and then contact an authorized service center.
 During thunderstorms, power off the device, and then remove all the cables connected to it
to prevent it from getting damaged due to lightning strikes.
Precautions for Using Wireless Devices
 When using the device, ensure that the antenna of the device is at least 20 cm away from all
persons.
 Do not use the device where using wireless devices is prohibited or may cause interference
or danger.
 The radio waves generated by the device may interfere with the operation of electronic
medical devices. If you are using any electrical medical device, contact its manufacturer
for the restrictions on the use of the device.
 Do not take the device into operating rooms, intensive care units (ICUs), or coronary care
units (CCUs).
Areas with Inflammables and Explosives
 Do not use the device where inflammables or explosives are stored, for example, in a gas
station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition,
follow the instructions indicated in text or symbols.
 Do not store or transport the device in the same box as inflammable liquids, gases, or
explosives.
Accessory Requirements
 Use only the accessories supplied or authorized by the device manufacturer. Otherwise, the
performance of the device may get affected, the warranty for the device or the laws and
regulations related to telecommunications terminals may become null and void, or an
injury may occur.
 Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires
may occur.
 Ensure that the power adapter meets the specifications indicated on the device nameplate.
 Ensure that the power adapter meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and it is tested and approved according to national or local
standards.
 For pluggable device, the socket-outlet shall be installed near the device and shall be easily
accessible.
Safety of Children
Keep the device and its accessories out of the reach of children. Otherwise, they may damage
the device and its accessories by mistake, or they may swallow the small components of the
device, causing suffocation or other dangerous situations.
Maintenance
 If the device is not used for a long time, power it off, and then remove all the cables
connected to it.
 If any exception occurs, for example, if the device emits any smoke or unusual sound or
smell, stop using the device immediately, power it off, remove all the cables connected to it,
and then contact an authorized service center.
 Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,
causing malfunction of the device.
 Before cleaning the device, stop using it, power it off, and then remove all the cables
connected to it.
 Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent or
spray to clean the device shell.
Environmental Protection
 Do not dispose of the device and the accessories in a garbage can.
 Dispose of the device according to the local regulations on disposing of packing materials,
exhausted batteries and abandoned devices, and support the recycling activity.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This device complies with part 68 of the FCC Rules.
This device should be installed and operated with a minimum distance of 20 cm between the
antenna and all persons.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Huawei
Technologies Co., Ltd. may void the FCC authorization to operate this device.
Copyright © Huawei Technologies Co., Ltd. 2012. All
rights reserved.
Trademarks and Permissions
Co., Ltd.
, and
are trademarks or registered trademarks of Huawei Technologies
Other trademarks, product, service and company names mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE
SHALL HUAWEI TECHNOLOGIES CO., LTD. BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,
BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
--------------------------------------------------------------------------------------------------------------Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated hotline
and email address in your country or region.
-----------------------------------------------------------------------------------------------------------------------------------
Issue: 01 (2012-10-24)
Part Number: 31505638

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2012:10:24 14:29:52+08:00
Create Date                     : 2012:10:24 14:29:25+08:00
Metadata Date                   : 2012:10:24 14:29:52+08:00
Creator Tool                    : Acrobat PDFMaker 10.0 Word 版
Document ID                     : uuid:5d824688-a51d-457f-9a5d-29fbb69dffa6
Instance ID                     : uuid:477796c7-a997-475d-9a23-3402e5b0328d
Format                          : application/pdf
Title                           : 
Creator                         : 
Producer                        : Adobe PDF Library 10.0
Page Layout                     : OneColumn
Page Mode                       : UseOutlines
Page Count                      : 7
Author                          : 

EXIF Metadata provided by EXIF.tools