Huawei Technologies LUA-L13 Smart Phone User Manual QSG cover

Download:
Mirror Download [FCC.gov]
Document ID	2929968
Application ID	sa5Y2qNZRDtc6He0iv1xzA==
Document Description	UserManual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	88.79kB (1109887 bits)
Date Submitted	2016-03-15 00:00:00
Date Available	2016-03-15 00:00:00
Creation Date	2017-11-20 17:13:58
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-20 17:13:58
Document Title	QSG_cover
Document Creator	Adobe Illustrator CS5.1

ECO
Quick Start Guide
Your phone at a glance
Before you start, let's take a look at your new phone.
Press and hold the power button to turn your phone on or off.
To forcibly restart your phone, press and hold the power
button until your phone vibrates.
Getting started
Follow the instructions in the following figures to install your
micro-SIM card, microSD card, and battery. Before you insert or
remove the micro-SIM card, power off your phone.
3
Locking and unlocking the screen
Press the power button to lock
the screen. If your phone is idle
for a specified period of time,
the screen will automatically
lock itself.
If the screen is off, press the
power button to turn it on.
Slide your finger in any
direction to unlock the screen.
Flick up from the bottom of
the lock screen to access the
quick operation panel for
one-touch optimization or to
open commonly used
applications, such as
Calculator.
Calling and messaging
Touch
to make a call
using the dialer. You can also
touch a phone number in your
contacts, or a number in a
message, email, web page, or
other source to place a call.
Touch
to send a text or
multimedia message. You
can save photos, audio clips,
videos, and other
attachments from received
multimedia messages.
Camera
Touch
Frame the scene you want to
capture. Let your camera focus
automatically or touch the
screen to focus on a specific
object. Then touch
take a photo.
to
Swipe left or right to switch
between different capture
modes.
Internet connection
You can access the Internet
over Wi-Fi or a mobile data
network.
Swipe down from the status
bar to open the notification
panel.
to turn on
Touch
mobile data.
Touch and hold
to go
to the Wi-Fi settings screen.
Turn on Wi-Fi and connect to
a Wi-Fi network.
Backing up data
Touch
to open the
Touch
settings menu. You can set
how often you want to back
up your data by following the
onscreen instructions.
and select the
Touch
data that you want to back
up, such as your contacts,
messages, and photos. Then
follow the onscreen
instructions to complete the
backup.
Phone manager
Touch
You can quickly scan your
phone for potential risks with
one touch. Follow the
onscreen instructions to use
one-touch optimization, or
manually clean the system
storage and manage your
applications.
Touch the options on the
screen to clean your system
trash, set the harassment
filter, activate power saving
mode, manage your
applications' notification
permissions, and more.
Personal information and data
security
The use of some functions or third-party applications on your
device could result in your personal information and data being
lost or becoming accessible to others. Several measures are
recommended to help you protect personal and confidential
information.

Place your device in a safe area to prevent it from
unauthorized use.

Set your device screen to lock and create a password or
unlock pattern to open it.

Periodically back up personal information kept on your
SIM/USIM card, memory card, or stored in your device
memory. If you change to a different device, be sure to
move or delete any personal information on your old
device.

If you are worried about viruses when you receive messages
or emails from a stranger, you can delete them without
opening them.

If you use your device to browse the Internet, avoid
websites that might pose a security risk to avoid theft of
your personal information.

If you use services such as Wi-Fi tether or Bluetooth, set
passwords for these services to prevent unauthorized
access. When these services are not in use, turn them off.

Install or upgrade device security software and regularly
scan for viruses.

Be sure to obtain third-party applications from a legitimate
source. Downloaded third-party applications should be
scanned for viruses.

Install security software or patches released by Huawei or
third-party application providers.

Some applications require and transmit location
information. As a result, a third-party may be able to share
your location information.
10

Your device may provide detection and diagnostic
information to third-party application providers. Third party
vendors use this information to improve their products and
services.
Legal notice
Copyright © Huawei Technologies Co., Ltd.
2016. All rights reserved.
Trademarks and permissions
, and
are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trade mark of ETSI.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Huawei Technologies Co., Ltd. is under license.
Other trademarks, product, service and company names
mentioned may be the property of their respective owners.
Third-Party software statement
Huawei does not own the intellectual property of the
third-party software and applications that are delivered with
this product. Therefore, Huawei will not provide any warranty
of any kind for third party software and applications. Neither
will Huawei provide support to customers who use third-party
software and applications, nor be responsible or liable for the
functions or performance of third-party software and
applications.
Third-party software and applications services may be
interrupted or terminated at any time, and Huawei does not
guarantee the availability of any content or service. Third-party
service providers provide content and services through network
or transmission tools outside of the control of Huawei. To the
greatest extent permitted by applicable law, it is explicitly
stated that Huawei shall not compensate or be liable for
11
services provided by third-party service providers, or the
interruption or termination of third-party contents or services.
Huawei shall not be responsible for the legality, quality, or any
other aspects of any software installed on this product, or for
any uploaded or downloaded third-party works in any form,
including but not limited to texts, images, videos, or software
etc. Customers shall bear the risk for any and all effects,
including incompatibility between the software and this
product, which result from installing software or uploading or
downloading the third-party works.
This product is based on the open-source Android™ platform.
Huawei has made necessary changes to the platform.
Therefore, this product may not support all the functions that
are supported by the standard Android platform or may be
incompatible with third-party software. Huawei does not
provide any warranty or representation in connect with any
such compatibility and expressly excludes all liability in
connection with such matters.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR
LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL
SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF
WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY
TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT
APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI
ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS
MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY
CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
12
Privacy policy
To better understand how we protect your personal
information, please see the privacy policy at
http://consumer.huawei.com/privacy-policy.
13
Safety information
This section contains important information about the
operation of your device. It also contains information about
how to use the device safely. Read this information carefully
before using your device.
Electronic device
Do not use your device if using the device is prohibited. Do not
use the device if doing so causes danger or interference with
other electronic devices.
Interference with medical equipment

Follow rules and regulations set forth by hospitals and
health care facilities. Do not use your device where
prohibited.

Some wireless devices may affect the performance of
hearing aids or pacemakers. Consult your service provider
for more information.

Pacemaker manufacturers recommend that a minimum
distance of 15 cm be maintained between a device and a
pacemaker to prevent potential interference with the
pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device in
your front pocket.
Protecting your hearing when using a headset

To prevent possible hearing damage, do not
listen at high volume levels for long periods.

Using a headset at high volumes may damage your hearing.
To reduce this risk, lower the headset volume to a safe and
comfortable level.

Exposure to high volumes while driving may cause
distraction and increase your risk of an accident.
14
Areas with flammables and explosives

Do not use the device where flammables or explosives are
stored (in a gas station, oil depot, or chemical plant, for
example). Using your device in these environments
increases the risk of explosion or fire. In addition, follow
the instructions indicated in text or symbols.

Do not store or transport the device in containers with
flammable liquids, gases, or explosives.
Traffic security

Observe local laws and regulations while using the device.
To reduce the risk of accidents, do not use your wireless
device while driving.

Concentrate on driving. Your first responsibility is to drive
safely.

Do not hold the device while driving. Use hands-free
accessories.

When you must make or answer a call, pull of the road
safely and park the vehicle first.

RF signals may affect the electronic systems of motor
vehicles. For more information, consult the vehicle
manufacturer.

Do not place the device over the air bag or in the air bag
deployment area in a motor vehicle. Doing so may hurt you
because of the strong force when the air bag inflates.

Do not use your device while flying in an aircraft or
immediately before boarding. Using wireless devices in an
aircraft may disrupt wireless networks, present a hazard to
aircraft operation, or be illegal.
Operating environment

Avoid dusty, damp, or dirty environments. Avoid magnetic
fields. Using the device in these environments may result in
circuit malfunctions.

Do not use your device during thunderstorms to protect
your device against any danger caused by lightning.
15

Ideal operating temperatures are 0℃ to 35℃. Ideal
storage temperatures are -20℃ to 45℃. Extreme heat or
cold may damage your device or accessories.

Do not expose your device to direct sunlight (such as on a
car dashboard) for prolonged periods.

To protect your device or accessories from fire or electrical
shock hazards, avoid rain and moisture.

Keep the device away from sources of heat and fire, such as
a heater, microwave oven, stove, water heater, radiator, or
candle.

Do not place sharp metal objects, such as pins, near the
earpiece or speaker. The earpiece may attract these objects
and result in injury.

Stop using your device or applications for a while if the
device is overheated. If skin is exposed to an overheated
device for an extended period, low temperature burn
symptoms, such as red spots and darker pigmentation, may
occur.

Do not use your device's camera flash directly in the eyes of
people or pets. Otherwise temporary loss of vision or
damage to the eyes may occur.

Do not touch the device's antenna. Otherwise,
communication quality may be reduced.

Do not allow children or pets to bite or suck the device or
accessories. Doing so may result in damage or explosion.

Observe local laws and regulations, and respect the privacy
and legal rights of others.
Child's safety

Comply with all precautions with regard to child's safety.
Letting children play with the device or its accessories may
be dangerous. The device includes detachable parts that
may present a choking hazard. Keep away from children.

The device and its accessories are not intended for use by
children. Children should only use the device with adult
supervision.
16
Accessories

Using an unapproved or incompatible power adapter,
charger or battery may cause fire, explosion or other
hazards.

Choose only accessories approved for use with this model
by the device manufacturer. The use of any other types of
accessories may void the warranty, may violate local
regulations and laws, and may be dangerous. Please
contact your retailer for information about the availability
of approved accessories in your area.
Charger safety

For pluggable devices, the socket-outlet shall be installed
near the devices and shall be easily accessible.

Unplug the charger from electrical outlets and the device
when not in use.

Do not drop or cause an impact to the charger.

If the power cable is damaged (for example, the cord is
exposed or broken), or the plug loosens, stop using it at
once. Continued use may lead to electric shocks, short
circuits, or fire.

Do not touch the power cord with wet hands or pull the
power cord to disconnect the charger.

Do not touch the device or the charger with wet hands.
Doing so may lead to short circuits, malfunctions, or electric
shocks.

If your charger has been exposed to water, other liquids, or
excessive moisture, take it to an authorized service center
for inspection.

Ensure that the charger meets the requirements of Clause
2.5 in IEC60950-1/EN60950-1 and has been tested and
approved according to national or local standards.

Connect the device only to products with the USB-IF logo
or with USB-IF compliance program completion.
17
Battery safety

Do not connect battery poles with conductors, such as keys,
jewelry, or other metal materials. Doing so may short-circuit
the battery and cause injuries or burns.

Keep the battery away from excessive heat and direct
sunlight. Do not place it on or in heating devices, such as
microwave ovens, stoves, or radiators. Batteries may
explode if overheated.

Do not attempt to modify or remanufacture the battery,
insert foreign objects into it, or immerse or expose it to
water or other liquids. Doing so may lead to fire, explosion,
or other hazards.

If the battery leaks, ensure that the electrolyte does not
make direct contact with your skins or eyes. If the
electrolyte touches your skins or splashes into your eyes,
immediately flush with clean water and consult a doctor.

In case of battery deformation, color change, or
overheating while charging or storing, immediately stop
using the device and remove the battery. Continued use
may lead to battery leakage, fire, or explosion.

Do not put batteries in fire as they may explode. Damaged
batteries may also explode.

Dispose of used batteries in accordance with local
regulations. Improper battery use may lead to fire,
explosion, or other hazards.

Do not allow children or pets to bite or suck the battery.
Doing so may result in damage or explosion.

Do not smash or pierce the battery, or expose it to high
external pressure. Doing so may lead to a short circuit or
overheating.

Do not drop the device or battery. If the device or battery is
dropped, especially on a hard surface, and may be
damaged.

If the device standby time shortens significantly, replace the
battery.
18
Cleaning and maintenance

Keep the device and accessories dry. Do not attempt to dry
it with an external heat source, such as a microwave oven
or hair dryer.

Do not expose your device or accessories to extreme heat
or cold. These environments may interfere with proper
function and may lead to fire or explosion.

Avoid collision, which may lead to device malfunctions,
overheating, fire, or explosion.

Before you clean or maintain the device, stop using it, stop
all applications, and disconnect all cables connected to it.

Do not use any chemical detergent, powder, or other
chemical agents (such as alcohol and benzene) to clean the
device or accessories. These substances may cause damage
to parts or present a fire hazard. Use a clean, soft, and dry
cloth to clean the device and accessories.

Do not place magnetic stripe cards, such as credit cards and
phone cards, near the device for extended periods of time.
Otherwise the magnetic stripe cards may be damaged.

Do not dismantle or remanufacture the device and its
accessories. This voids the warranty and releases the
manufacturer from liability for damage. In case of damage,
contact an authorized service center for assistance or repair.

If the device screen is broken in a collision, immediately
stop using the device. Do not touch or attempt to remove
the broken parts. Promptly contact an authorized service
center.
Emergency calls
The availability of emergency calls is subject to your cellular
network quality, service provider policy, and local laws and
regulations. Never rely solely on your device for critical
communications like medical emergencies.
19
Environmental protection

The device and its accessories (if included), such as the
power adapter, headset, and battery should not be
disposed of with household garbage.

Disposal of the device and its accessories is subject to local
regulations. Support proper collection and recycling.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used near
your ear or at a distance of 1.5 cm from your body. Ensure that
the device accessories, such as a device case and device holster,
are not composed of metal components. Keep the device away
from your body to meet the distance requirement.
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported to the FCC
for this device type complies with this limit.
The highest SAR value reported to the FCC for this device type
when using at the ear is 0.98 W/kg, and when properly worn
on the body is 0.61 W/kg, and when using the Wi-Fi hotspot
function is 1.34 W/Kg.
FCC statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
20
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Caution: Any changes or modifications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
compliance could void the user's authority to operate the
equipment.
21
All pictures and illustrations in this guide, including
but not limited to the phone color, size, and display
content, are for reference only. The actual product
may vary. Nothing in this guide constitutes a warranty
of any kind, express or implied.
Note: Remember the Google account your phone
last logged in to.
During an untrusted factory settings restoration or
microSD card–based update, Google's anti-theft
mechanism requires you to enter the Google
account your phone last logged in to on the
startup navigation screen for identity
authentication. Your phone can properly power on
only after the identity authentication passes.
Please visit
http://consumer.huawei.com/en/support/hotline/ for
recently updated hotline and email address in your
country or region.
Model: HUAWEI LUA-L13
6020XXX_01

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Create Date                     : 2016:03:03 17:10:18+08:00
Creator                         : Adobe Illustrator CS5.1
Modify Date                     : 2016:03:09 17:11:31+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : QSG_cover
Metadata Date                   : 2016:03:09 17:11:31+08:00
Creator Tool                    : Adobe Illustrator CS5.1
Thumbnail Width                 : 256
Thumbnail Height                : 220
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9005 bytes, use -b option to extract)
Instance ID                     : uuid:5d399e10-b12d-4781-bc46-d15c008864fd
Document ID                     : xmp.did:2442B9450FE1E5119F21A89E9B708382
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:1538c5a7-b5f6-4e74-ab1b-2ae0cab70fa5
Derived From Document ID        : xmp.did:BDF3DAF28DA7E511A5D0E01741829DAA
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, converted, converted, saved, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, saved, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, saved, saved, saved, saved
History Instance ID             : xmp.iid:CABB5ACDEF32E211A1CB83D3B3DF4E4E, xmp.iid:D81D26CEF5B2E211875DB83976592541, xmp.iid:56F224309847E31184A4812DB7C66F97, xmp.iid:C0FB9FE4844AE311A29A879F8BC87B3A, xmp.iid:53349FAC8810E41197E3D4F2193F9A4B, xmp.iid:D7CC9D3C5124E411AA18BCD9935BF9AB, xmp.iid:7CB3F7B347E2E411B67BB0505FC3123E, xmp.iid:BDF3DAF28DA7E511A5D0E01741829DAA, xmp.iid:2442B9450FE1E5119F21A89E9B708382
History When                    : 2012:11:20 16:53:49+08:00, 2013:05:02 14:59:16+08:00, 2013:11:07 18:34:31+08:00, 2013:11:11 11:53:58+08:00, 2014:07:21 11:39:52+08:00, 2014:08:15 15:56:53+08:00, 2015:04:14 09:43:51+08:00, 2015:12:21 10:53:01+08:00, 2016:03:03 17:10:15+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1
History Changed                 : /, /, /, /, /, /, /, /, /
History Parameters              : from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 64.999306
Max Page Size H                 : 124.999778
Max Page Size Unit              : Millimeters
Font Name                       : FrutigerNextLT-Medium, FrutigerNextCom-Regular
Font Family                     : FrutigerNext LT, Frutiger Next Com
Font Face                       : Medium, Regular
Font Type                       : TrueType, Open Type
Font Version                    : Version 2.02 2003, Version 1.01
Font Composite                  : False, False
Font File Name                  : LT_1.ttf, Frutiger Next Com Regular.ttf
Plate Names                     : Black
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Page Count                      : 23

EXIF Metadata provided by EXIF.tools