Huawei Technologies MC323 CDMA2000 1x Module User Manual English

Huawei Technologies Co.,Ltd CDMA2000 1x Module English

Installation Manual 1

Copyright © Huawei Technologies Co., Ltd. 2010.
All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner
reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions
are prohibited by applicable laws or such actions are approved by respective
copyright holders under licenses.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei
Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the
property of their respective owners.
Notice
Some features of the product and its accessories described herein rely on the
software installed, capacities and settings of local network, and may not be
activated or may be limited by local network operators or network service
providers, thus the descriptions herein may not exactly match the product or its
accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any
information or specifications contained in this manual without prior notice or
obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED
BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL
HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations
and will obtain all necessary governmental permits and licenses in order to export,
re-export or import the product mentioned in this manual including the software
and technical data therein.
i
Contents
Getting to Know the MC323..................................................................... 1
Installation Guide .................................................................................. 2
Thank you for purchasing HUAWEI MC323 CDMA
2000 1x Module (hereinafter referred to as the
MC323)
Note:
This manual briefly describes the preparation, the process for
installing/uninstalling, and safety precautions.
You are recommended to read the manual before using the MC323.
Getting to Know the MC323
The following figure shows the appearance of the MC323. The actual product may
differ.
n Antenna interface
It is used to connect and fix an antenna.
1
2
o Fixing hole
A screw, metal fastener, and nut are used to fix an MC323 module on a
development board through this fixing hole.
p Board-to-board (B2B) connector (male)
It is connected to the B2B connector (female) on the development board.
Note:
In certain cases, your development board may be disassembled only by the
professionals.
Before you install the MC323 onto the development board, consult the
development board manufacturer or read the user manual of the
development board.
Installation Guide
Installing and Using an MC323 Module
1. Connect an antenna connector to the antenna interface of an MC323.
Note:
Insert the antenna connectors vertically into the antenna interfaces of the
MC323.
Do not pinch the antenna cable or damage the connectors. Otherwise, the
wirelessperformance of theMC323 be reduced or the MC323 cannot work
normally.
Ensure that the antenna is placed normally.
2. Fasten the male B2B connector on the MC323 module with the female B2B
3
connector of a development board to fix the MC323 module on the
development board.
3. Place a metal fastener between the MC323 module and the development
board. Put a screw through the fixing hole of the MC323, metal fastener, and
fixing hole of the development board in sequence. Then fasten a nut on the
screw.
4. Insert a UIM card into the UIM card socket.
Removing an MC323 Module from a Development Board
1. If the MC323 module is powered on, press and hold the power button for two
seconds to power off the module. Remove the UIM card from the UIM card
socket.
2. Remove the screw on the MC323 module.
3. Remove the MC323 module from the development board.
4. Remove the antenna from the MC323 module.

Navigation menu