Huawei Technologies ME906E Modular Transmitter supporting GSM850, PCS1900, UMTS FDD II/V, LTE FDD II/V/VII. User Manual ME906E Module QSG English

Download:
Mirror Download [FCC.gov]
Document ID	1977458
Application ID	kp6rR1DazCdS+l7MZIoc1A==
Document Description	User Manual ME906E
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.26kB (153189 bits)
Date Submitted	2013-05-29 00:00:00
Date Available	2013-05-29 00:00:00
Creation Date	2013-05-23 14:22:07
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2013-05-23 14:22:07
Document Title	Microsoft Word - ME906E Module QSG-English.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	l81004498

Copyright © Huawei Technologies Co., Ltd. 2012.
All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce,
distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign,
or sublicense the said software, unless such restrictions are prohibited by applicable laws or
such actions are approved by respective copyright holders under licenses.
Trademarks and Permissions
, and
Technologies Co., Ltd.
are trademarks or registered trademarks of Huawei
Other trademarks, product, service and company names mentioned are the property of their
respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and may not be activated or may be
limited by local network operators or network service providers, thus the descriptions herein
may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI
TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR
ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will
obtain all necessary governmental permits and licenses in order to export, re-export or
import the product mentioned in this manual including the software and technical data
therein.
Contents
Getting to Know the ME906E ...............................................................................................................................1
Assembly ......................................................................................................................................................................3
Thank you for purchasing HUAWEI ME906E LTE Module
(hereinafter referred to as the ME906E)
Note:
„
This manual briefly describes the preparation, Assembly and safety precautions.
„
You are recommended to read the manual before using the ME906E
Getting to Know the ME906E
The module is standard NGFF interface with a dimension of 30 mm × 42 mm × 2.3 mm. It is
applied to the user interface board, and can be used as a wireless terminal in a network
environment.
2
Assembly
It refers to M.2 specification.
The module will need a mechanical retention at the end of the board. The module specifies a
5.5 mm Dia. keep out zone at the end for attaching a screw.
The module Stand-off and mounting screw also serve as part of the module Electrical
Ground path. The Stand-off should be connected directly to the ground plane on the
platform. So that when the module is mounted and the mounting screw is screwed on to
hold the module in place, this will make the electrical ground connection from the module
to the platform ground plane.
The stand-off must provide a Thermal Ground Path. The design requirements for thermal are
a material with a minimum conductivity of 50 watts per meter Kelvin and surface area of 22
Sq mm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2013:05:23 14:22:07+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:05:23 14:22:07+08:00
Format                          : application/pdf
Title                           : Microsoft Word - ME906E Module QSG-English.doc
Creator                         : l81004498
Document ID                     : uuid:138feeb1-77f5-4930-90a9-d599cd899f1f
Instance ID                     : uuid:739c6d17-92ce-4068-9ee6-8c7028839e05
Page Count                      : 6
Author                          : l81004498

EXIF Metadata provided by EXIF.tools