Huawei Technologies MU509-65 HSDPA Module User Manual English
Huawei Technologies Co.,Ltd HSDPA Module English
Contents
- 1. UserManual.pdf
- 2. UserManual_Safety.pdf
UserManual.pdf
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. All rights reserved. No part of this manual may be reproduced or transmitted in any f orm or by any means without prior written consent of Huawei Technologi es Co., Ltd. and its affiliates ("Huawei"). The prod uct described in this manual may include copy righted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decry pt, extract, rev erse engineer, lease, assign, or sublicense the said sof tware, unless such restrictions are prohibited by applicable laws or such actions are approv ed by respectiv e copy right holders. Trademarks and Permissions , and Technolo gies Co., Ltd. are trademarks or registered trademarks of Huawei Other trademarks, product, serv ice and company names mentioned may be the property of their respectiv e owners. Notice Some f eatures of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and theref ore may not be activ ated or may be limited by local network operators or network serv ice prov iders. Thus, the descriptions herein may not exactly match the product or its accessories which y ou purchase. Huawei reserv es the right to change or modify any inf ormation or specif ications contained in this manual without prior notice and without any liability. DISCLAIMER ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTA BILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MA XIMU M E XTENT PERMI TTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAG ES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABL E OR NOT. THE MA XI MUM LIABILITY (THIS LIMITATION SHALL NOT AP PLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT A PPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE A MOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary gov ernmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Contents Getting to Know the MU509-65 ................................................................................ 1 Dimension ..........................................................................................................................................................1 Position of RF Connectors..........................................................................................................................3 Pin Def initions ..................................................................................................................................................4 Thank you for purchasing HUAWEI MU509-65 WCDMA Module (hereinafter referred to as the MU509-65) Note: This manual brief ly describes the dimension, the position of RF connectors and Pin def initions. Y ou are recommended to read the manual bef ore using the MU509-65. Getting to Know the MU509-65 Dimension The package of the WCDMA module is 145 pin with a dimension of 30 mm × 30 mm × 2.57mm. It is applied to the user interf ace board, and can be used as a wireless terminal in a network env ironment. 2 Position of RF Connectors The WCDMA module prov ided one antenna connector (MAIN_AN T) f or connecting the external antenna. Pin Definitions The sequence of MU509-65 interf ace is shown belo w. 5 The Pin def initions of the MU509-65 interf ace is shown belo w. Pin No. Pin Name Pad Type Description Para mete r Min. (V) Typ. (V) Max. (V) NC NC NC NC Not connected Not connected Not connected Not connected PCM_SYNC PCM interfa ce sync PCM_DIN PCM I/F data in VOH VOL VIH VIL 2.15 1.69 –0.3 2.6 0.45 2.9 0.91 PCM_DOU T PCM I/F data out VOH 2.15 2.6 VOL 0.45 VOH 2.15 2.6 VOL 0.45 VIH 1.69 2.9 VIL –0.3 3.3 3.3 3.8 3.8 0.91 4.2 4.2 VIH 1.17 2.1 VIL –0.3 0.63 PCM_CLK PCM interfa ce clock 10 NC NC 11 WAKEUP_I Not connected Not connected Host to set the module into sleep or wake up the module from sle ep. 12 13 VBAT VBAT PI PI 14 PS_HOLD 15 Reserved 16 17 18 NC NC NC Power supply input Power supply input Used for JTAG inte rfac e assigning a test point for it. Reserved, please keep this pin open. Not connected Not connected Not connected Pin No. Pin Name Pad Type Description Para mete r Min. (V) Typ. (V) Max. (V) 19 20 21 22 23 24 25 26 27 NC NC NC NC NC NC NC NC NC 28 Reserved 29 Reserved Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Reserved, please keep this pin open. Reserved, please keep this pin open. JTAG test mode sele ct 30 JTAG_T MS VIH 1.17 2.1 31 32 33 VCC_EXT2 VCC_EXT1 NC PO PO 2.6 V power output 1.8 V power output Not connected VIL –0.3 2.5 1.65 2.6 1.8 0.63 2.7 1.95 34 USIM_VCC PO Power supply for USIM ca rd 1.65 1.8 1.95 35 PI Coin cell input 37 VCOIN JTAG_TRS T _N NC VIH VIL 2.7 1.5 1.17 –0.3 2.85 3.0 3.0 3.25 2.1 0.63 38 MIC2_P 39 MIC2_N 40 MIC1_P 36 JTAG res et Not connected Positive pole of the input of audio interface 2. Negative pole of the input of audio interface 2. Positive pole of the input of audio interface 1. Pin No. Pin Name Pad Type Description 41 MIC1_N Negative pole of the input of audio interface 1. 42 JTAG_TCK JTAG clock input 43 Reserved Reserved, please keep this pin open. 44 GPIO I/O General Purpose I/O pin. The function of these pins has not been defined. 45 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined. 46 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined. 47 48 49 50 NC GND GND GND Not connected Ground Ground Ground 51 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined. 52 53 54 GND GND GND Ground Ground Ground 55 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined. Min. (V) Typ. (V) VIH VIL 1.17 –0.3 2.1 0.63 Para mete r Max. (V) VOH VOL VIH VIL VOH VOL VIH VIL VOH VOL 2.15 1.69 –0.3 2.15 1.69 –0.3 2.15 2.6 0.45 2.9 0.91 2.6 0.45 2.9 0.91 2.6 0.45 VIH 1.69 VIL VOH VOL VIH VIL VOH VOL VIH VIL –0.3 2.15 1.69 –0.3 2.15 1.69 –0.3 2.9 0.91 2.6 0.45 2.9 0.91 2.6 0.45 2.9 0.91 Pin No. 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 Pin Name Pad Type Description Para mete r Min. (V) Typ. (V) Max. (V) GND GND GND GND NC NC NC NC NC NC NC NC NC NC NC WAKEUP_O UT Ground Ground Ground Ground Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Module to wake up the host VOH VOL 2.15 2.6 0.45 VOH 1.35 1.8 VOL VOH VOL VOH VOL VOH VOL VOH VOL VOH VOL VIH VIL VIH VIL 2.15 2.15 2.15 2.15 2.15 1.69 –0.3 1.69 –0.3 0.45 2.6 0.45 2.6 0.45 2.6 0.45 2.6 0.45 2.6 0.45 2.9 0.91 2.9 0.91 72 JTAG_TD O JTAG test data output 73 UART_DSR UART Dat a Set Ready 74 UART_RTS UART Ready for re ceive 75 UART_DCD UART Dat a Carrier D etect 76 UART_TX UART transmit output 77 UART_RIN G UART Ring Indicator 78 UART_RX UART receive data input 79 UART_DTR Data Te rminal Ready 10 Pin No. 80 Pin Name Pad Type Description UART_CTS UART Clea r to Send 82 83 84 85 86 POWER_ON _OFF NC NC NC USB_DM USB_DP I/O I/O System power-on or power-off Not connected Not connected Not connected Full-speed USB DFull-speed USB D+ 87 JTAG_TD I JTAG test data input 88 USIM_RES E USIM reset 81 89 90 USIM_D AT USIM_CL K Para mete r VIH VIL VIH VIL VIH VIL VOH I/O 91 LED_ST AT U 92 NC 93 JTAG_RTCK 94 95 NC NC 11 1.69 –0.3 1.17 –0.3 1.17 –0.3 1.65/ 2.7 1.8/ 2.85 VOH 1.65/ 2.7 1.8/ 2.85 VOL VIH 1.65/ 2.7 1.8/ 2.85 Max. (V) 2.9 0.91 2.1 0.63 2.1 0.63 1.95/ 3.0 0.36/ 0.57 1.95/ 3.0 0.36/ 0.57 1.95/ 3.0 0.36/ 0.57 1.95/ 3.0 0.36/ 0.57 VIL VOH 1.65/ 2.7 1.8/ 2.85 VOL VIH VIL 1.17 –0.3 2.1 0.63 USIM clock Not connected Not connected Typ. (V) VOL USIM data Status indicator Current sink Drive strength: 10 mA Not connected JTAG re turn clock Min. (V) Pin No. Pin Name Pad Type 96 EAR_OUT_ 97 EAR_OUT_P 98 99 SPKR_OUT_ SPKR_OUT_ Description Negative pole of the output of Earphone interfac e. Positive pole of the output of Earphone interfac e. Positive pole of the output of speaker interfa ce. Negative pole of the output of speaker interfa ce. 100 RESIN_N Reset module. 101 LED_M OD E 102 103 104 NC NC NC 105 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined. 106 107 108 GND MAIN_ANT GND Ground RF main antenna pad Ground 109 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined. 110 111 112 GND NC GND Ground Not connected Ground 113 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined. 114 GND Ground Mode indicator Current sink Drive strength: 10 mA Not connected Not connected Not connected 12 Para mete r Min. (V) Typ. (V) Max. (V) VIH VIL 1.17 –0.3 2.1 0.63 VOH VOL VIH VIL VOH VOL VIH VIL VOH VOL VIH VIL 2.15 1.69 –0.3 2.15 1.69 –0.3 2.15 1.69 –0.3 2.6 0.45 2.9 0.91 2.6 0.45 2.9 0.91 2.6 0.45 2.9 0.91 Pin No. Pin Name Pad Type Description Para mete r Min. (V) Typ. (V) Max. (V) 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 NC GND NC NC NC NC GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Not connected Ground Not connected Not connected Not connected Not connected Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad Thermal Ground Pad 13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : w69297 Create Date : 2015:09:17 14:16:49+08:00 Modify Date : 2016:02:03 09:50:58+01:00 Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : w69297 Title : English Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2016:02:03 09:50:58+01:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:8b1f356b-4fde-450f-b556-e73a40899b66 Instance ID : uuid:480a72a3-3573-41a8-b30e-bab1f66d5122 Page Count : 16EXIF Metadata provided by EXIF.tools