Huawei Technologies MU609 Mobile Cellular device supporting GSM850, PCS1900, UMTS FDD II & V User Manual English

Huawei Technologies Co.,Ltd Mobile Cellular device supporting GSM850, PCS1900, UMTS FDD II & V English

Contents

Exhibit 08 Users manual

Download: Huawei Technologies MU609 Mobile Cellular device supporting GSM850, PCS1900, UMTS FDD II & V User Manual English
Mirror Download [FCC.gov]Huawei Technologies MU609 Mobile Cellular device supporting GSM850, PCS1900, UMTS FDD II & V User Manual English
Document ID1936025
Application ID/4xZoKoAfbCyNF4XY8NfsQ==
Document DescriptionExhibit 08 Users manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.27kB (265832 bits)
Date Submitted2013-04-10 00:00:00
Date Available2013-04-10 00:00:00
Creation Date2013-03-28 08:21:57
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2013-03-28 16:22:01
Document TitleEnglish
Document CreatorMicrosoft® Office Word 2007
Document Author: w69297

Copyright © Huawei Technologies Co., Ltd. 2013.
All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce,
distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign,
or sublicense the said software, unless such restrictions are prohibited by applicable laws or
such actions are approved by respective copyright holders under licenses.
Trademarks and Permissions
, and
Technologies Co., Ltd.
are trademarks or registered trademarks of Huawei
Other trademarks, product, service and company names mentioned are the property of their
respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and may not be activated or may be
limited by local network operators or network service providers, thus the descriptions herein
may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI
TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR
ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will
obtain all necessary governmental permits and licenses in order to export, re-export or
import the product mentioned in this manual including the software and technical data
therein.
Contents
Getting to Know the MU609 ........................................................................................................................... 1
PCB Design ............................................................................................................................................................ 2
Assembly................................................................................................................................................................ 4
Thank you for purchasing HUAWEI MU609 HSPA LGA Module
(hereinafter referred to as the MU609)
Note:

This manual briefly describes the preparation, the process for PCB Design, Assembly
and safety precautions.

You are recommended to read the manual before using the MU609.
Getting to Know the MU609

The package of the LGA module is 145 pin LGA with a dimension of 30 mm × 30 mm ×
2.2 mm. It is applied to the user interface board, and can be used as a wireless terminal
in a network environment.
PCB Design
PCB Pad Design
To achieve assembly yields and solder joints of high reliability, it is recommended that
the PCB pad size be designed as follows: the sizes of the solder pads on customers'
PCBs are the same as those of the module's solder pads for the high production
efficiency and high reliability of solder joints. For details, see the following figure:
Requirements on PCB Layout

The thickness of PCB is more than 1.0 mm (1.2 mm recommended) to reduce the
deformation caused by high temperature welding.

The minimum distance between the LGA module and the PCB edge is 1.5 mm. Other
devices must be located more than 1 mm away from the LGA module (more than 3 mm
recommended if rework is considered).

When the PCB layout is double sided, it is recommended that the LGA module be
placed on the second side for assembly.
Design of Solder Mask

The PCB pad design can be solder mask defined (SMD), or non-solder mask defined
(NSMD).NSMD is recommended. In addition, the solder mask of the NSMD pad design
is larger than the pad so the reliability of the solder joint can be improved.

The solder mask must be 100 µm to150 µm larger than the pad, that is, the single side
of the solder mask must be 50 µm to 75 µm larger than the pad. The specific size
depends on the processing capability of the PCB manufacturer.
Assembly
Stencil Design
It is recommended that the stencil for the LGA module be 0.15 mm in thickness. For the
stencil design, see the following figure:
5
Reflow Profile
For the soldering temperature of the LGA module, see the following figure.
Reflow profile
Reflow parameters
Temperature Zone
Time
Key Parameter
Preheat zone (40°C–150°C)
60s–120s
Heating rate:
0.5°C/s–2°C/s
Soak zone
(t1–t2): 60s–120s
Heating rate: < 1.0°C/s
Reflow zone (> 217°C)
(t3–t4): 30s–90s
Peak reflow
temperature:
230°C–250°C
Cooling zone
Cooling rate: 1°C/s ≤ Slope ≤ 4°C/s
(150°C–200°C)

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : w69297
Create Date                     : 2013:03:28 08:21:57Z
Modify Date                     : 2013:03:28 16:22:01+08:00
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : w69297
Title                           : English
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2013:03:28 16:22:01+08:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:ece3f4f3-1a7a-4818-8081-31a92c4a6ef7
Instance ID                     : uuid:3d52fd8a-42d1-42cb-bc26-73365985f4f1
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QISMU609

Navigation menu