Huawei Technologies PRA-LX1 Smart Phone User Manual Nova lite dual

Huawei Technologies Co.,Ltd Smart Phone Nova lite dual

UserManual

Quick Start Guide
1For more information Open HiCare to read the user guide and service information or get help from the online forum. Go to http://consumer.huawei.com/en/ to download the user guide for your device and read the FAQ, privacy policy, and other information. Go to Settings > About phone > Legal information to read the legal information. Please visit http://consumer.huawei.com/en/support/hotline/ for the most up-to-date contact information for your country or region.
2Your phone at a glanceBefore you start, let's take a look at your new phone.•  To turn on your phone, press and hold the power button until your phone vibrates and the screen turns on.•  To turn off your phone, press and hold the power button, and then touch  . To forcibly restart your phone, press and hold the power button until your phone vibrates..JDSPQIPOF4QFBLFS-JHIUTFOTPS.JDSP64#QPSU&BSQJFDF7PMVNFCVUUPO1PXFSCVUUPO'SPOUDBNFSB4UBUVTJOEJDBUPS)FBETFUKBDL$BNFSB'JOHFSQSJOUTDBOOFS'MBTI
3Getting startedFollow the instructions in the following figures to set up your phone. •  Do not insert or remove a SIM card while your phone is on.•  Ensure that the SIM card is in the correct position and keep the card tray level when inserting it into your phone. Please exercise caution when using the SIM ejector pin to avoid hurting your fingers or damaging your phone. Store your pin in a safe place out of the reach of children to prevent them from swallowing it or injuring themselves by accident.Caution Insert the SIM card into the correct card slot to ensure that it can be recognized by the phone.NJDSP4%Or
4Dual card dual standby single passYour phone supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously.•  When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider.•  When you are using SIM card 1's data service, SIM card 2's data service will be disabled. Your phone's single pass feature helps reduce power consumption and increase your phone's standby time. It is not related to your service provider's network conditions.It may be a good idea to contact your service provider and subscribe to missed call reminder and related assistance services to avoid the conflicts mentioned above.
5Safety InformationPlease read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.Viewing the safety and regulatory informationFor more information on safety, touch Settings > About phone > Legal information > Safety information. For more information on regulation, touch Settings > About phone > Authentication info.For more information on certification logos, touch Settings > About phone > Certification logos.Operation and safety•  To prevent possible hearing damage, do not listen at high volume levels for long periods.•  Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.•  Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.•  Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential
6interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.•  Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.•  Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.•  While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.•  To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields.•  When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.•  Unplug the charger from electrical outlets and the device when not in use.•  Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
7•  Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.•  Use only the following listed AC Adapters/Power Supplies: HUAWEI: HW-050100E01, HW-050100U01, HW-050100A01, HW-050100B01, HW-050200E01, HW-050200U01, HW-050200A01, HW-050200B01. EU regulatory conformanceBody worn operationThe device complies with RF specifications when used near your ear or at a distance of 0.5 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.PRA-LX1: The highest SAR value reported for this device type when tested at the ear is 0.36 W/kg, and when properly worn on the body is 0.93 W/kg.PRA-LA1: The highest SAR value reported for this device type when tested at the ear is 0.36 W/kg, and when properly worn on the body is 0.93 W/kg.StatementHereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2009/125/EC.
8The most recent, effective version of the DoC (declaration of conformity) can be viewed athttp://consumer.huawei.com/certification.The following marking is included in the product:This device may be operated in all member states of the EU.Observe national and local regulations where the device is used.This device may be restricted for use, depending on the local network.Restrictions in the 2.4 GHz band:Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.FCC Regulatory ComplianceBody worn operationThe device complies with RF specifications when used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
9Certification information (SAR)This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit.PRA-LX1:The highest SAR value reported to the FCC for this device type when using at the ear is 1.12 W/kg, and when properly worn on the body is 1.27 W/kg, and when using the Wi-Fi hotspot function is 0.99 W/Kg.FCC statementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.
10--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment.
11Legal NoticeTrademarks and Permissions   and   are trademarks or registered trademarks of Huawei Technologies Co., Ltd.Android™ is a trademark of Google Inc.LTE is a trademark of ETSI.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.Privacy PolicyTo better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy.
12Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. All pictures and illustrations in this guide, including but not limited to the phone color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied.
底边留5mmNote: Remember the Google account your phone last logged in to. During an untrusted factory settings restoration or microSD card–based update, Google's anti-theft mechanism requires you to enter the Google account your phone last logged in to on the startup navigation screen for identity authentication. Your phone can properly power on only after the identity authentication passes.Model: PRA-LA1            PRA-LX1       3150XXXX_01Please visithttp://consumer.huawei.com/en/support/hotline forrecent updated hotline and email address in yourcountry or region.

Navigation menu