Huawei Technologies RNE-LX3 Smart Phone User Manual cover en

Download:
Mirror Download [FCC.gov]
Document ID	3622840
Application ID	aM+pqHW4BknmpqMV1IL7Rw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.63kB (1082838 bits)
Date Submitted	2017-10-31 00:00:00
Date Available	2018-04-10 00:00:00
Creation Date	2017-01-09 13:55:35
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-10-24 10:03:09
Document Title	cover_en
Document Creator	Adobe Illustrator CC 2015 (Windows)

Quick Start Guide
RNE-L03, RNE-L23
Your device at a glance
Before you start, let's take a look at your new device.
•
To power on your device, press and hold the power button
until the screen turns on.
•
To power off your device, press and hold the power button,
and then touch
Flash
Light sensor
Secondary
microphone
Earpiece
Front camera
Dual-lens
camera
Fingerprint
scanner
Status indicator
Volume button
Power button
Selfie toning
flash
9VKGQKX
.KGJYKZPGIQ
6XOSGX_
SOIXUVNUTK
3OIXU;9(VUXZ
To force your device to restart, press and hold the power
button until your device vibrates.
Getting Started
Follow the instructions in the following figures to set up your
device.
NJD
P4
RNE-L03
NJD
SP
4%
or
RNE-L23
• Do not insert or remove the SIM card when your device is
powered on.
• Ensure that the card is correctly aligned and that the card
tray is level when you insert it into your device.
Be careful not to scratch your device or hurt yourself when
using the eject pin. Store the eject pin out of the reach of
children to prevent accidental swallowing or injury.
Do
not use cut or modified SIM or microSD cards with your
Caution
device as these may not be recognized and could damage
the card tray.
Dual card dual standby single pass
This description should only be used in conjunction with
the RNE-L23.
Your device supports only dual card dual standby single pass,
which means you cannot use both SIM cards for calls or data
services simultaneously.
•
When you are on a call using SIM card 1, SIM card 2 cannot
be used to make or answer calls. If someone calls SIM card
2, the caller will hear a voice message similar to "The
subscriber you dialed is out of the service area" or "The
subscriber you dialed cannot be connected for the
moment, please try again later." The actual message will
vary by service provider.
•
When you are using SIM card 1's data service, SIM card 2's
data service will be disabled.
Your device's single pass feature helps reduce power
consumption and increase your device's standby time. It is not
related to your service provider's network conditions.
It may be a good idea to contact your service provider and
subscribe to missed call reminder and related assistance services
to avoid the conflicts mentioned above.
For more information
If you encounter any problems while using your device, you can
obtain help from the following resources:
Log on to the official Huawei website. You can:
•
Visit http://consumer.huawei.com/en/ to download user
guides, view frequently asked questions and other
information.
•
Visit http://consumer.huawei.com/en/support/hotline for
the most up-to-date contact information for your country
or region.
Go to Settings and touch About phone > Legal information
to view legal information for your product.
Go to Settings and touch About phone > Legal information
> Safety information to view safety information for your
product.
Go to Settings and touch About phone > Authentication
info to view regulatory information for your product.
Go to Settings and touch About phone > Certification logos
to view more information on certification logos for your
product.
All pictures and illustrations in this guide, including but not
limited to the product color, size, and display content, are
for your reference only. The actual product may vary.
Nothing in this guide constitutes a warranty of any kind,
express or implied.
Safety Information
Please read all of the safety information carefully before using
your device to ensure its safe and proper operation and to learn
how to dispose of your device properly.
Operation and safety
•
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
•
Using an unapproved or incompatible power adapter,
charger, or battery may damage your device, shorten its
lifespan, or cause a fire, explosion, or other hazards.
•
Ideal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are -20 °C to +45 °C.
•
Pacemaker manufacturers recommend that a minimum
distance of 15 cm be maintained between a device and a
pacemaker to prevent potential interference with the
pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device in
your front pocket.
•
Keep the device and the battery away from excessive heat
and direct sunlight. Do not place them on or in heating
devices, such as microwave ovens, stoves, or radiators.
•
Observe local laws and regulations while using the device.
To reduce the risk of accidents, do not use your wireless
device while driving.
•
While flying in an aircraft or immediately before boarding,
only use your device according to instructions provided.
Use of a wireless device in an aircraft may disrupt wireless
networks, present a hazard to aircraft operation, or be
illegal.
•
To prevent damage to your device's parts or internal
circuits, do not use it in dusty, smoky, damp, or dirty
environments or near magnetic fields.
•
When charging the device, make sure the power adapter is
plugged into a socket near the devices and is easily
accessible.
•
Unplug the charger from electrical outlets and the device
when not in use.
•
Do not use, store or transport the device where flammables
or explosives are stored (in a gas station, oil depot, or
chemical plant, for example). Using your device in these
environments increases the risk of explosion or fire.
•
Dispose of this device, the battery, and accessories
according to local regulations. They should not be disposed
of in normal household waste. Improper battery use may
lead to fire, explosion, or other hazards.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery,
literature or packaging reminds you that all electronic products
and batteries must be taken to separate waste collection points
at the end of their working lives; they must not be disposed of
in the normal waste stream with household garbage. It is the
responsibility of the user to dispose of the equipment using a
designated collection point or service for separate recycling of
waste electrical and electronic equipment (WEEE) and batteries
according to local laws.
Proper collection and recycling of your equipment helps ensure
electrical and electronic equipment (EEE) waste is recycled in a
manner that conserves valuable materials and protects human
health and the environment, improper handling, accidental
breakage, damage, and/or improper recycling at the end of its
life may be harmful for health and environment. For more
information about where and how to drop off your EEE waste,
please contact your local authorities, retailer or household
waste disposal service or visit the website
http://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories are compliant with local
applicable rules on the restriction of the use of certain
hazardous substances in electrical and electronic equipment,
such as EU REACH, RoHS and Batteries (where included)
regulations. For declarations of conformity about REACH and
RoHS, please visit our web site
http://consumer.huawei.com/certification.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used near your
ear or at a distance of 1.50 cm from your body. Ensure that the
device accessories, such as a device case and device holster, are
not composed of metal components. Keep the device away
from your body to meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported to the FCC
for this device type complies with this limit.
The highest SAR value reported to the FCC for this device type
when using at the ear is 1.10 W/kg, and when properly worn on
the body is 0.71 W/kg, and when using the Wi-Fi hotspot
function is 1.09 W/Kg.
FCC statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Any changes or modifications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
compliance could void the user's authority to operate the
equipment.
Legal Notice
Trademarks and Permissions
, and
are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trademark of ETSI.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Huawei Technologies Co., Ltd. is under license.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
trademarks of Wi-Fi Alliance.
Privacy Policy
To better understand how we protect your personal
information, please see the privacy policy at
http://consumer.huawei.com/privacy-policy.
Copyright © Huawei Technologies Co., Ltd.
2017. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND
DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
Note: Remember the Google account your phone
last logged in to.
During an untrusted factory settings restoration or
microSD card–based update, Google's anti-theft
mechanism requires you to enter the Google account
your phone last logged in to on the startup
navigation screen for identity authentication. Your
phone can properly power on only after the identity
authentication passes.
Please visit
http://consumer.huawei.com/en/support/hotline for
recent updated hotline and email address in your
country or region.
31509164_01

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2017:10:24 10:03:09+08:00
Create Date                     : 2017:01:09 13:55:35+08:00
Metadata Date                   : 2017:10:24 10:03:09+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Windows)
Thumbnail Width                 : 136
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 2899 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : cover_en
Document ID                     : xmp.did:f48d410e-0d0e-f743-a94c-12e95673406b
Instance ID                     : uuid:84292028-8725-4ed0-85db-d3c35ca1e966
Original Document ID            : uuid:566502f1-ad36-4220-9f05-ea517428a51f
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:3bb578cd-d833-458b-bd22-4637b835ac3f
Derived From Document ID        : xmp.did:B04420ED817DE61198F1B206F7DBAD1A
Derived From Original Document ID: uuid:566502f1-ad36-4220-9f05-ea517428a51f
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:63FE3C357773E611AD1CB85632BBAFC7, xmp.iid:f48d410e-0d0e-f743-a94c-12e95673406b
History When                    : 2016:09:07 08:33:17+08:00, 2017:01:09 13:55:31+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CC 2015 (Windows)
History Changed                 : /, /
Producer                        : Adobe PDF library 15.00
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 184.250000
Max Page Size H                 : 354.329987
Max Page Size Unit              : Points
Font Name                       : FrutigerNextCom-Regular
Font Family                     : Frutiger Next Com
Font Face                       : Regular
Font Type                       : Open Type
Font Version                    : Version 1.01
Font Composite                  : False
Font File Name                  : Frutiger Next Com Regular_0.ttf
Plate Names                     : Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Page Count                      : 11
Creator                         : Adobe Illustrator CC 2015 (Windows)

EXIF Metadata provided by EXIF.tools