Huawei Technologies U1100 WCDMA/GPRS/GSM Mobile Phone with Bluetooth User Manual U1100

Huawei Technologies Co.,Ltd WCDMA/GPRS/GSM Mobile Phone with Bluetooth U1100

User Manual

Wonderful Communication, Mobile LifeWelcome to U1100 Mobile Phone from Huawei Technologies Co., Ltd. HUAWEI U1100 Mobile PhoneUser Guide
NoticeCopyright © 2008 Huawei Technologies Co., Ltd.All Rights Reserved1No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.23Trademarks4 and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks men-tioned in this manual are the properties of their respective holders. 56Notice7The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this man-ual do not constitute a warranty of any kind, expressed or implied.8Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, refer to the 9section “Warnings and Precautions”.Huawei Technologies Co., Ltd.Address:10 Administration Building, Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, P. R. ChinaPostal Code: 518129Website: http://www.huawei.com
11 Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, refer to the 12 section “Warnings and Precautions”.Do not switch on your phone when it is prohibited to use mobile phones or when the phone may cause interfer-ence or danger.Do not use your phone while driving.Follow any rules or regulations in hospitals and health care facilities. Switch off your phone near medical apparatus.Switch off your phone in aircraft. The phone may cause interference to control signals of the aircraft.Switch off your phone near high-preci-sion electronic devices. The phone may affect the performance of these devices.Do not attempt to disassemble your phone or its accessories. Only qualified personnel are allowed to service or repair the phone.Do not place your phone or its accesso-ries in containers with strong electro-magnetic field.Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them.Do not put your phone in a high-temperature place or use it in a place with flammable gas such as a gas station.Keep your phone and its accessories away from children. Do not allow children to use your phone without guidance.Use only approved batteries and chargers to avoid the risk of explosions.Safety Precautions
Observe any laws or regulations on the use of wireless device. Respect others’ privacy and legal rights when using your wireless device.Strictly follow the relevant instructions on 49 of this manual while using the USB cable. Otherwise your phone or PC may be damaged.
11Table of ContentsTable of Contents 1Getting to Know Your Phone 1Packing List ................................................1Your Phone ................................................2Getting Started 6Loading/Unloading the SIM Card ...............6Charging the Battery ..................................7Powering On/Off.........................................8Call Service 10Making or Answering Calls.......................10Operations During a Voice Call ................11Calls .........................................................11Call Log 13Making Calls from Call Log ......................13Other Operations......................................13Text Input 14T9 Input Method .......................................14Traditional Input Method ..........................14"123" Numeric Input Method ....................15Symbol Input Method ...............................15Input Different Languages ........................15Contacts 16Making Calls from the Contacts ...............16Searching for a Contact............................16Other Operations......................................17Groups......................................................17Messaging 19Text Messages......................................... 19Email ........................................................ 21Push Inbox ............................................... 24Broadcast Inbox .......................................24Voice Mail number ................................... 25Common Phrases .................................... 25Alarm 26Alarm Clock.............................................. 26Calendar 27Calendar .................................................. 27Organiser & Tools 29SIM ToolKit .............................................. 29Task ......................................................... 29Memo ...................................................... 29Synchronise ............................................. 30Calculator ................................................. 30Unit converter........................................... 31Currency converter .................................. 31World Time............................................... 32Stopwatch ................................................ 32Timer........................................................ 32Service dial number ................................. 32 Vodafone live! 33Vodafone live! .......................................... 33Enter URL ................................................ 33Bookmarks ............................................... 34Internet Settings....................................... 34 Connections 35
2Bluetooth ..................................................35USB ..........................................................36Settings 38Phone settings..........................................38Display settings ........................................39Message settings .....................................39Call settings ..............................................39Connectivity..............................................42Network ...................................................42Security ....................................................42 Warnings and Precautions 44Electronic Device......................................44Hospital ....................................................44Storage Environment................................45Children Safety.........................................45Operating Environment ............................46Cleaning and Maintenance.......................46Environmental Protection .........................47Emergency Calls ......................................47Battery ......................................................47Charger ....................................................48Using the USB Cable ...............................49Certification Information (SAR).................49Acronyms and Abbreviations 53Appendix 54Index 1
11Getting to Know Your PhoneYour U1100 phone can operate in virtually all coun-tries, automatically switching between WCDMA 2100 and GSM/GPRS 900/1800/1900 net-works. This allows you to enjoy communication wher-ever you use your mobile phone. Note The services supported by your phone should be also supported by the network from where you use the phone. For details, please contact your service provider. Packing ListYour phone package box contains the following arti-cles: 1One U1100 mobile phone 2One travel charger 3One Li-ion battery 4One user Guide 5One headset (optional) 6One USB data cable (optional) 7One CD-ROM disk which contains U1100 Mobile Phone PC Assistant (optional)
Your Phone2 Your PhoneSend keyMessage keyLeft function keyScroll keyPower/End keyRight function keyClear key To delete a character before the cursor in the Earpieceediting mode.keyPress and hold it to lock the keypad in the standby mode. Then press OK key to unlock the keypad. keyOK key• Press this key to scroll through a menu.• To quick access Browser, Contacts, text message editor and Alarms.• To activate the function indicated at the left of the prompt bar on the screen.• To access the main menu in standby mode.• To access the play screen in the standby mode.• To make or answer a call. • To access the Call Log screen in the standby mode. • To activate the function indicated at the right of the prompt bar on the screen.• To access Homepage in standby mode.• To start the selected function in the menu.• To access the main menu in standby mode. • To end an ongoing call or reject an incoming call.• To return to the Home screen.• Press and hold it to power on or power off the phone.• Press and hold it to switch to the meeting profile from the current profile.• To select the check box of the option item.*#
Your Phone3Getting to Know Your Phone1Back and Side ViewBottom View Home Screen◆ Icon barThis area displays the phone status. The following table illustrates all the icons that may appear on this bar.MircophoneHeadset jackCharger connector/Cable connector Icon DescriptionIndicates signal strength. The more bars that appear, the stronger the signal.The phone is currently in a GSM network.The phone is currently in a WCDMA network.You are using the roaming service.To display the operations currently available. Icon barDesktopTo display the operations and the function options.Prompt bar
Your Phone4Introduction to the MenuYour phone provides an extensive range of functions. You can use these functions by navigating the follow-ing menus: Call Log, Vodafone Live!, Messaging, Organiser & Tools, Contacts and Settings. 1In the standby mode, press to display the main menu. 2Press the scroll key to scroll through the menu, and then press to select. 3If the menu contains further submenus, repeat step 2.Indicates network connection state.Indicates security connection state of the network.The phone is in a call.The keypad is locked.Alarm clock is enabled.Bluetooth is enabled.You have new text messages.You have new PUSH messages.You have new voice mail.The vibration mode is enabled.The phone is in mute mode.The normal profile is activated.The headset is plugged in.Forwarding all incoming voice calls to line 1.Icon DescriptionCall line 2 is enabled currently.Forwarding all incoming voice calls to line 2.Your PC connects to the Internet through your phone.Indicates power level of the battery.Icon Description
Your Phone5Getting to Know Your Phone1 4Use the selected function according to the prompts on the screen. 5Select Back to return to the previous menu. Press to return to the standby mode.
62Getting Started Loading/Unloading the SIM CardLoad your SIM card before using your phone. To use the SIM card properly, please read the following instructions carefully. Note • Keep the SIM card out of the reach of chil-dren.• The SIM card and its metal contacts can be easily damaged by scratching or bend-ing. Ensure care when you carry, load or remove it.• Always disconnect the charger from the phone before loading or removing the SIM card.To load or remove the SIM card, do as follows: 1Power off the phone and remove battery. 2Position the card at the card slot entrance, mak-ing sure it is facing the same way as shown in the diagram below, with the notched corner at the top right. Then slide in as shown. 3Fit the battery into the battery slot on back of the phone. Press the battery down until it clicks into place. 4Slide the back cover to the phone.
Charging the Battery7Getting Started2 5To remove the SIM card, power off your phone and take out the battery. Then press the SIM card with one finger and slide it out of the slot. Charging the BatteryBefore charging the battery, please read the following precautions carefully. Note • When you charge the battery for the first time, please charge it for a minimum of 12 hours.• The battery discharges even while not being used. If you have not used it for a long time, please recharge it first.• The charging time depends on the envi-ronmental temperature and the age of the battery.• The battery can be recharged but eventu-ally wears out. If the battery lasts for a shorter time period than usual after being charged normally, replace it with a battery of the same type.• Do not strike, throw or cause any kind of violent shock to the battery, otherwise liq-uid leakage, body damage, overheating, explosion or fire may occur.• Charge the battery by using the charger supplied with your phone.Charging with a Cable ChargerBefore charging the battery with a cable charger, ensure that the battery has been properly loaded into your phone.To charge the battery, do as follows: 1Insert the plug of the charger into the connector of the phone as shown in the following figure. 2Plug in the connector of the charger to a power socket.
Powering On/Off8 Note • When the battery power level is very low, the phone makes alert sounds and dis-plays a prompt. When the battery power level is too low, the phone will power off automatically.• When the battery is being charged, the charging indicator blinks continuously. When the charging indicator stops blink-ing, it indicates that the battery is full. Powering On/OffPowering OnEnsure that the SIM card is in your phone and that the battery has been charged.Press and hold to power on your phone.Powering OffPress and hold to power off your phone.Access CodesIf you have set the phone password and the PIN is ON, you have to enter the corresponding access codes when you power on your phone. For setting and changing the access codes, please refer to "Set-tings/Security Setup" on page 42.◆ Phone PasswordThe phone password is used to protect your phone from unauthorized use. The phone password is preset as 0000 for your phone.◆ PINThe personal identification number (PIN) code is used to protect your SIM card from unauthorized use. The PIN code is usually provided when you get the SIM card from your service provider. If you have not received a PIN code or if you have forgotten it, con-tact your service provider.◆ PIN2Some SIM cards provide a PIN2 code. Some special functions such as the "Fixed Dialer Number" are not
Powering On/Off9Getting Started2available until you enter the PIN2 code. At the same time, your SIM card should support these functions.◆ PUKTo unlock a locked SIM card, you need to enter the PIN Unblocking Key (PUK) code. The PUK code is usually provided when you get the SIM card from Vodafone. If you have not received a PUK code or if you have forgotten it, contact your service provider.◆ PUK2Some SIM cards provide a PUK2 code that is used to unlock a locked PIN2 code. The PUK2 code is usu-ally provided when you get the SIM card from service provider. If you have not received a PUK2 code or if you have forgotten it, contact your service provider.
103Call Service Making or Answering CallsMaking a Voice Call 1Enter or edit a phone number in one of the fol-lowing ways:• Enter a phone number through the keypad.• Select a number from the Call Log screen.• Select a number from the Contacts screen. 2Press to dial. 3Press to end the call.Making Voice Calls Using SDNYou can make a voice call through speed dialing. For instructions on assigning speed dialing numbers, refer to "Contacts/Other Operations" on page 17.To make a call by speed dial number (SDN), press and hold the number key until the phone dials the corresponding phone number.Answering or Rejecting CallsYou can set the answer mode to Any key or Send key. For details, refer to "Settings/Call Settings/Answer mode".The following describes how to answer or reject a call in different answer modes:Operation DescriptionAnswera call• If the answer mode is Any key, open the phone and press any key. except and .• If the answer mode is Send key, press .• If the headset is in use, press the con-trol key on the headset.Rejecta callPress or select Options > Reject.End a call • If the headset is not in use, you can close the phone or press .• If the headset is in use, press the con-trol key of the headset.
Operations During a Voice Call11Call Service3You can also set the auto answer mode to Immedi-ate answer, Message or Recorded message.For details, refer to “Settings/Call settings/Auto answer”. Operations During a Voice CallIcon Description: A call is ongoing.: The call is on hold.: There is a new incoming call during a call.OperationsDuring a voice call, you can select Options to per-form the following operations.• Hold/Resume: To hold or resume the call during a call.• End: To end all calls, the active call, the current call or the on hold call.• New Call: To make a 3-party call during a call.• Handsfree/Earpiece: To switch between the Hands-free and the Earpiece modes during a call.• Other applications: To access the SMS screen, the Contacts screen or the Call Log screen.• Answer/Reject: Your phone allows you to handle two calls simultaneously. During a call, if there is a new incoming call, select Options > Answer to answer it or select Options > Reject to reject it.• Swap: To swap between calls during a 3-party call.• Conference call/Private call: To switch to the con-ference call during a 3-party call or to talk with a party privately during a conference call.• Mute/Unmute:To mute or unmute your voice during a call. CallsThe recently dialed calls, received calls and missed calls are saved automatically. Reply by messageSelect Options > Reply to send a pre-defined message to the caller.Operation Description
Calls12Select Calls in the main menu and then press the left/right scroll key to select All calls , Missed , Received or Dialed . Then select Options for the following options.• Create message: To send a message.• Save number: To save the numbers of the selected record.• Call: To make a voice call.• Display mode: You can select Normal to display all records or select Simple to ignore the duplicated records.• Delete: To delete the selected record.• Mark/Unmark: To mark/unmark a record or all records.• Calls status: To display the information on voice calls and data services. In the voice call and data page, you can select Reset to clear all records.
134Call LogThe recently dialed calls, received calls and missed calls are saved automatically. This makes it easier to refer to these calls. Making Calls from Call Log 1Select Call Login the main menu and then press the left/right scroll key to switch between All calls , Missed , Received and Dialed . 2Press the up/down scroll key to select a record. Press to make a voice call. Other OperationsPress the left/right scroll key to select All calls , Missed , Received or Dialed . Then select Options for the following options.• Create message: To send a message.• Save number: To save the numbers of the selected record to the phone, the SIM card, or an existing contact.• Voice call: To make a voice call.• Display mode: You can select Normal to display all records or select Simple to ignore the duplicated records.• Delete: To delete the selected record.• Mark/Unmark: To mark/unmark a record or all records.• Calls status: To display the information on voice calls and data services. In the voice calll and data page, you can select Reset to clear all records.
145Text InputYou can use the keypad to enter alphanumeric char-acters and symbols. For example, you can add entries to the contacts, write messages or schedule events on the calendar. Note While entering text:• Press to switch between input meth-ods, including "abc", "Abc", "ABC", and numbers.• Press to enable or disable T9 input method.• Press to display the commonly-used symbols list. You can use the scroll keys to select.• Press to delete the letter before the cursor. T9 Input MethodWith the T9 input method, you can easily and quickly enter words. T9 is a predictive text entry mode. It allows you to easily and quickly enter words. Press the relevant key that corresponds to the desired letter and T9 will offer you candidate words.Press each key carrying the desired letter once, and then the predictive text scheme will present the can-didate words composed by the letters you have entered in the drop-down menu.For example, to enter the word "good" with the T9 input method, follow these steps. 1Press successively the keys , , , and which "g", "o", "o", and "d" belong to, and the candidate words composed by these letters will be shown in the drop-down menu. 2Use the up/down scroll key to select "good". Note Press repeatedly and you will see "T9 abc", "T9 Abc" and "T9 ABC" on the upper left corner of the screen successively. It indi-cates the words to be entered will be in lower case, first letter capitalized or in upper case. Traditional Input Method When T9 input method is off, you can use the tradi-tional input method for entering alphabetic charac-
"123" Numeric Input Method15Text Input5ters. Repeatedly press the key that carries the letter to be entered when it appears on the screen.For example, to enter the word "Hello" with the tradi-tional input method, follow these steps. 1Press that carries "h" repeatedly and all let-ters carried by this key will be displayed succes-sively on the screen. Stop when you see an "h" on the screen. 2After entering the first letter, you can directly press another character key to enter the next let-ter. If the next desired letter is on the same key as the current one, wait until the cursor appears to the right of the current letter and then you can enter the next one. 3Enter "e", "l", "l" and "o" in the same way. Note Press repeatedly and you will see "abc", "Abc" or "ABC" on the upper left corner of the screen successively. It indicates the words to be entered will be in lower case, first letter capitalized or in upper case. "123" Numeric Input MethodIn a text editing screen, press and hold the character/number keys to enter corresponding numeric charac-ters.You can also press successively the key to switch to the "123" numeric input method, and enter corre-sponding numeric characters by pressing the charac-ter/number keys. Symbol Input MethodYou can press to display the symbols list and then select Recent to display recent symbols.You can also press to input the commonly-used symbols in a text editing screen. Input Different LanguagesIn a text editing screen, select Options > Input language to set the language for the text. The selected language will be displayed on the upper middle part of the editing screen.
166ContactsContacts enables you to save and manage such information as phone numbers and addresses of your contacts. You can save such information in your phone or your SIM card. You can also assign fre-quently-used numbers to speed dialing keys for your convenience. Making Calls from the ContactsYou can make a voice call with a contact selected from the contacts list. 1In the Contacts screen, press the left/right scroll key to select Phone or SIM . 2Select a contact and select Options >Voice Call. Alternatively, you can select Edit before call to edit the number before making the call. Searching for a ContactYou can find a contact from the contacts list easily and quickly by using this function on both the Phone screen and the SIM screen. 1In the Contacts screen, press the left/right scroll key to select Phone or SIM . 2Select Options > Search. 3Select Options > Search, and then enter the contact name you are searching for. The contact is displayed.You can use quick search in the Phone or SIM screen. Enter a string (one or more letters or num-bers) contained in the contact name you are search-ing for. Then the contacts whose names contain this string are displayed,You can also find a contact by entering the initials of the first name and the last name of the contact. For example, to find a contact named "Alice Green", enter the initials "ag". This contact is displayed in the candidate list.
Other Operations176Contacts Other OperationsIn the Contacts screen, press the left/right scroll key to select Phone or SIM .Then select Options for the following options.• Details: To view the details of contact.• Create message: To send a message or Email to the selected contact.• New: To create a new contact.• Send contact: To send a contact to other devices supporting SMS.• Copy to SIM/Copy to phone: To Copy one or more contacts from your phone to the SIM card or from your SIM card to the phone.• Speed Dial Number: To assign often-used numbers to speed dialing keys "2" to "9".• My business card: To save your own information to a Business Card. You can send the information by SMS or Bluetooth.• Backup contacts: To back up your contacts from your phone to a memory card or from your memory card to your phone.• Delete: To delete the selected contact.• Mark/Unmark: To mark/unmark a record or all records in your phone and SIM card.• Memory status: To view the memory status of both your phone and SIM card. • Settings: To sort the contacts in the phone and the SIM card or to set an alert before saving. GroupsYou can rename a group, add group members, or delete a group.Adding/Deleting Group MembersYou can add a member to a group in your phone or delete a member from it. 1In the Contacts screen, press the left/right scroll key to select Groups. 2Select a group and press to view the details.
Groups18 3Select Options > Add. Select a contact and press .The member you added is displayed in the group member list.To delete a group member, select a member from the group member list, and then select Options > Delete.Managing a Group 1In the Contacts screen, press the left/right scroll key to select Groups. 2Select a group and select Options for the follow-ing options.• Details: to view the details of a group.• Rename: to change the name of a group.• Create message: to send a text message to all members of a group.• Delete: to delete a group and all members of the group. Note You cannot rename or delete any group pre-set in your phone.
197Messaging Text MessagesThe maximum content for a single text message is 160 English letters. If the characters you enter exceed this limit, the text is divided into two or more continuous messages when it is sent.Creating a Text Message 1Select Messaging > Write SMS in the main menu. 2In the message editing screen, select Options:• Send:To send the message.• Insert number: You can insert a phone number saved on the phone or the SIM card.• Common phrases: You can use these to speed up the process of entering text.• T9 Switch: You can select this option to enable or disable T9 input method.• Input mode: You may select one of the input methods to enter the message contents.• Input language: You can select a language for this message. 3After editing the message, press to access the "Edit numbers" screen.• Enter the phone number, and then select Options > Send or press to send the mes-sage.• Select Options > Group or Contacts to choose a number and send the message.• Select Options > Save to drafts to save the message.SMS MailboxesThe phone provides three mailboxes for SMS, namely, Inbox, Drafts and Sent.◆ InboxYou can save the received messages in Inbox.Icons in InboxIcon Descriptiona read message in the phone memoryan unread message in the phone mem-ory
Text Messages20Viewing Messages in Inbox 1Select Messaging > SMS > Inbox. 2Press the up/down scroll key to view the mes-sages and then press to view the details. 3Reply or call back.• Press to reply with a text message.• Press to call back by a voice call.You can select Options for the following operations.• Reply: To reply the message. • Forward: To forward the message.• Save number: To save the numbers retrieved from an SMS to phone or SIM memory or an existing entry in the contacts. • Extract URL: To extract URL address from an SMS for browsing web pages or tream media.• Save Email address: To retrieve email address from an SMS and save it.• Copy to SIM: To back up the SMS to SIM memory.• Voice call: To make a voice call. • Delete: To delete the message.◆ DraftsThe Draft box is used to save the messages you cre-ated and saved and those which failed to send.Icons in Drafts: A text message saved to the phone.: A text message saved to the SIM card.Viewing and Editing Messages in the Draft 1Select Messaging > SMS > Drafts. 2Press the up/down scroll key to select a mes-sage and press to edit it.a read message on the SIM card mem-ory an unread message on the SIM card memorya read message report an unread message reportIcon Description
Email21Messaging7◆ SentSent is used to save the messages that have been sent.Icons in Sent: A text message that has been sent and saved to the phone.: A text message that has been sent and saved to the SIM card.Viewing Messages in the Sent 1Select Messaging > SMS > Sent. 2Press the up/down scroll key to select a mes-sage and press to view the details. 3Forward or make a call.• Press to forward a text message.• Press to make a voice call.You may select Options to do the same operations as those of SMS Inbox.SMS SettingsYou can change the SMS settings by performing the following steps. 1Select Messaging > Settings > SMS from the main menu. 2Set the parameters related to messages. EmailThe Phone provides four mailboxes for email, namely, Inbox, Drafts, Sent and Outbox.Creating an Email 1Select Messaging > Email from the main menu. 2Select Recipients and press .• Select one record in the recipients list and then press to enter an email address. 3In the email editing screen, select Subject and press to edit the contents. 4In the email editing screen, select the Content text box and press to edit the content.
Email22 5In the email editing screen, select Options to save or send the email. The saved emails are in Messaging > Email > Drafts.MailboxesYour phone provides four mailboxes for Emails, namely, Inbox, Drafts, Sent and Outbox.◆ InboxAll Emails received are saved in the inbox.Icons in Inbox: A read email.: An unread email.Viewing and Editing Emails in Inbox 1Select an email and press to view the con-tent. If only the title of this email is received, the phone prompts whether to download other infor-mation of the email. 2In the details screen, select Options > Reply to reply the sender.Other Options for Inbox 1Access Inbox of email. 2Select Options for the following operations.• View: to view the selected email.• Reply: to reply to the selected email.• Forward: to forward the selected email.• Move to folder: to move the selected email to a specified folder.• My folders: to categorize your emails in differ-ent folders.• Sync inbox: to synchronise emails from server.• Sort: to sort your emails according to date, sender or topic.• Delete: to delete the selected email.• mark: to mark the selected emails in the drafts.• Unmark all: to unmark all emails in the inbox.• Mark all: to mark all emails in the inbox.◆ DraftsThe saved new emails are saved in the drafts.
Email23Messaging7Icons in Drafts: Emails to be sent.Viewing and Editing Emails in Drafts 1Select the desired email in the drafts and press to access the editing screen. 2Edit the related information. For details, perform the same operations as in creating an email.◆ SentThe emails sent to server are saved in the sent.Icon for Sent : A read email.Viewing and Editing Emails in Sent 1Select an email and press to access the editing screen. 2Edit the related information. For details, perform the same operations as in creating an email.◆ OutboxThose emails which failed to be sent are retained in the outbox.Icon for Outbox: Emails failed to send.Viewing and Editing Emails in Outbox 1Select an email and press to access the editing screen. 2Edit the related information. For details, perform the same operations as in creating an email.Email Settings 1Select Messaging > Settings > Email. 2The related options contains: Accounts, Com-mon Options and Memory status. 3Select Accounts and Common Options, after completing settings, press Back. Note For the account settings, contact your ser-vice provider.
Push Inbox24 Push InboxThe Push Inbox is used to save the Push messages you have received.Viewing Push MessagesIn the Push Inbox, select a Push message, and then press to view the details of the Push message.◆ Icon for Push Inbox• : A read Push message.• : An unread Push message.◆ Other Operations for the Push Inbox• Load: To start the WAP browser and connect a URL specified by the Push message.• Delete: To delete the selected messages.• Mark: To mark a push message in the inbox.• Unmark all: To unmark all Push messages.• mark all: To mark all the Push messages.Push Inbox SettingsSelect Messaging > Settings > Push messages to set the Push inbox.◆ Push message settingYou can set the acceptable push messages.◆ Enable push SLYou can enable or disable the push SL function by selecting On or Off. Broadcast InboxThe broadcast messages are saved in the broadcast inbox. You can set the broadcast message.Select Messaging > Settings > Broadcast to set the following items.• Service: to enable or disable this service.• Subscription: to subscribe to broadcast channels or cancel the subscription.• Language: to select the language of the broadcast. • Silent alert: to specify whether a silent alert occurs when there is a new broadcast message.
Voice Mail number25Messaging7• Auto delete: to set whether to auto delete earlier messages when the broadcast inbox memory is full. Voice Mail numberThe voice mail number is already preset for you in the phone. To access your voicemail, press and hold in standby mode. The phone dials the voice mail number automatically. Common PhrasesYour phone has been preset with some commonly used phrases. They are used for editing a new mes-sage, sending a message while answering a call and auto replying. You can select Messaging > Settings > Common phrases to edit them if you want.
268Alarm Alarm ClockYou can set several alarm clocks. You can also set the prompt messages, alarm tones and the cycle period for alarm clocks. Setting Alarm ClocksEnter alarm function, you can select one alarm from the list, and then press to set an alarm clock.In the screen for editing alarm clock, you can set the following items: alarm time, the prompt message, the ringtone, the alarm cycle, the snooze function, the vibration function, the alarm tone.Prompt Interface for an AlarmWhen it is time for an alarm clock to ring, the selected alarm tone is played and a prompt interface is dis-played. You can stop the ringing by pressing any key . On the prompt interface, you can select to snooze or stop the alarm prompt.If your phone is powered off, the alarm clock can still ring. When the alarm rings, you can choose to power on the phone.Stopping the Alarm ClockSelect an alarm clock from the list, and press the left function key to deactivate it.
279Calendar CalendarWith this function, you can view the calendar and manage your schedules.New ScheduleEnter calendar function, you can select Options > New to create the schedule events for the current day.In the screen for editing schedule, you can set the fol-lowing items: schedule title, schedule location, schedule type, start/end time of the schedule, whether the alarm is on, when to prompt before the start time, alarm cycle, schedule details, alarm tone, and image files. Note You can create up to 500 schedules in total and 15 for each day. While creating a new schedule, you need to set the alarm on before setting the alarm time, the alarm cycle, the alarm tone and the image.Calendar FunctionsEnter calendar function and select Options. You can perform the following operations.• New: To create a new schedule.• Go to: To go to a certain date directly from the Month view screen.• Display event: To view all events, specified events, Calendar files and to back up all schedules to a memory card.• View mode: To view the calendar in three different modes: month view, week view, and day view.• Management: To manage all schedules, including Backup all and Restore data.• Delete event: To delete all past events, specific period events or all events.• Settings: To set save location, main view, week begin day.• Memory status: To view the memory status, includ-ing the used space and the total space.
Calendar28Prompt Interface for a ScheduleWhen it is time to remind you of a schedule, the selected ringtone is played and a prompt interface is displayed. You can stop the ringing by pressing any key. On the prompt interface, you can snooze the alarm or stop the prompt.
2910Organiser & ToolsThis function provides you with various assistant tools. You can access the Organiser & Tools screen by selecting Organiser & Tools from the main menu. SIM ToolKitYour Phone supports a number of intelligent SIM ToolKit (STK) functions such as location based ser-vices. For more information, contact your service provider. TaskYou can define and manage tasks to be conducted before a certain time. Your phone can remind you of these tasks and track them automatically.Select Task from Organiser & Tools.The tasks are classified into three kinds: Pending, Done, All Tasks. You can define up to 1000 tasks on your phone.New TasksTo define a new task, press or select Options > New on the Tasks screen. In the screen for editing task, you can set the follow-ing items: the title of the task, the deadline, the prior-ity level, the task state, the task alert, sound alarm, vibration, the alert time, the task type.Tasks Functions On the Tasks screen, you can also perform the fol-lowing operations: edit, new, send, copy, day view, set as done, delete, delete all and memory status.Prompt Interface for a TaskWhen it is time for the phone to remind you of a task, it rings automatically and a prompt interface is dis-played. You can stop the ringing by pressing any key. On the prompt interface, you can snooze or stop the task prompt. Memo You can store important events on your phone. You can save up to 100 such memos.Select Memo from Organiser & Tools. If there is no memo, you need to create one when you access the Memo screen.
Synchronise30On the Memo Pad screen, you can perform the fol-lowing operations: Edit, New, As SMS, Delete, Delete all and view the Memory status. SynchroniseYou can synchronise contacts with your personal phone book stored on a network server. This service is network dependent. Contact your service provider for further details. Select Synchronise from Organiser & Toolstocreate or edit a profile. Select Options > View log to view the latest synchronisation log. Before you use the synchronise function, you may need to set a pro-file. 1To create a profile, select Options > New to cre-ate a profile. 2Press the left/right scroll key to switch between Synchronise item, Server Setting, and Network profile. 3In the Synchronise item screen, select the item to be synchronized and press to confirm it. Then, enter the Database name, User name, Password of the synchronisation items. 4In the Server Setting screen, enter the Server Address, User name, and Password. 5In the Network profile screen, enter the Proxy address and the Proxy port. Then, enter the Network Access Point and select a desired pro-file. 6Return to the previous menu and select Options > Synchronise to start synchronising. Note This service is not available in all networks. Please contact your service provider for more information. CalculatorYou can perform addition, subtraction, multiplication, division and extraction operations on your phone.• Press the number keys to enter the figures.• Press the scroll key to enter the operators.• Press the left function key to clear.• Press the right function key to exit Calculator.
Unit converter31Organiser & Tools10• Press to enter a radix point.• Press to delete the character to the left of the cursor.• Press to enter an equal mark. Unit converterYou can convert units of length and weight between different systems on your phone. 1Press the up/down scroll key to select the unit type bar, input unit bar or output unit bar. 2On the unit type selection bar, press the left/right scroll key to select weight or length. 3On the From bar, press the left/right scroll key to select the unit to be converted from. 4On the To bar, press the left/right scroll key to select the unit to be converted to. 5Press the number keys to enter a numeric value to be converted in the Input bar. Press or select CE to clear the numeric values you entered. Currency converterYou can convert a value from one currency to another using your phone.To using this function, access the Currency con-verter screen, and then press the up/down scroll key to switch between the setup items. 1On the Input bar, press the number keys to enter a numeric value to be converted. 2On the From bar, press the left/right scroll key to select the currency to be converted from. 3On the To bar, press the left/right scroll key to select the currency to be converted to. 4On the Rate bar, enter the currency rate.Then you can view the conversion result.Press to clear the numeric values you entered.Select Setting in the currency converter screen, and you can select frequently used currency units. This makes it easy to switch between selected units in the From or To bar.
World Time32 World TimeYou can view the time of important cities around the world. To switch among the time zones, press the left/right scroll key.If the daylight saving time (DST) is used in your city, you need to set the phone to DST. Then, you can get the right local time. To set the phone to DST, switch to the desired time zone and then select Options > Set to DST. StopwatchYou can use the stopwatch function and save up to five records on your phone.On the Stopwatch screen, you can perform the fol-lowing operations: start, save, pause, continue, reset. TimerYou can set a timer for up to 99 hours and 59 min-utes. After you have set it, the timer is displayed on the home screen. Service dial numberYou can contact your service provider by dialing this number.
3311 Vodafone live!The built-in browser makes it easy and pleasant to tour around the Internet. You can access the Browser screen by selecting Browser from the main menu. Vodafone live!Browsing Pre-set Web PagesOn the homepage, select a link from the page. Then select to browse the page. When browsing, you can press the scroll keys to select a link you want to access. The selected link is highlighted. Press to access the link.Other Operations for the HomepageAfter selecting Options from the homepage, you can perform the following operations:• Vodafone live!: To access the vodafone live.• Forward: To go forward when you browse web pages.• Bookmarks: To access the bookmark directory and view the saved bookmarks.• Enter URL: To enter a website address and access it.• Recent pages: To access pages you have browsed recently. The recently browsed pages can be saved.• Save page: To save the pages in your phone. Web pages are saved to the Saved pages.• Save item: To save contents on the page to the folders in your phone.• Refresh: To refresh the current web page.• Saved pages: To browse the saved pages offline.• Settings: To change the relevant settings for the web page. • Exit: To exit the current web page. Enter URLAccess the Enter URL screen, and then you can enter the address of the page to be accessed. You can select Goto, Edit, Delete or Delete all from the Options to perform corresponding operations upon the entered website address.
Bookmarks34 BookmarksWith this option, you can save and edit the informa-tion of the websites that you often access.Select any one of them, and then select Options, you can perform the following operations.• Goto: To connect to the server to get the latest web page.• Add: To add a Title and Address for a bookmark.• Edit: To edit the selected bookmark. The preset bookmarks cannot be edited.• Delete: to delete the selected bookmark. Internet SettingsThese are preset for you to use the Internet service. If you need to modify them, open the Browser and select Internet Settings.
3512 ConnectionsYour phone provides you with many data communi-cation functions. You can access the Connectivity screen by selecting Settings from the main menu. BluetoothYou may use the built-in modem of your phone to access the Internet with a PC. You can also talk by using the Bluetooth headset or Bluetooth loud-speaker. Note The Bluetooth function supported by your phone meets the requirements of Bluetooth Specification 1.2. It can work successfully only if you use it with compatible Bluetooth devices. For more information, refer to the user manuals of related devices, or consult the manufacturer of related devices.Bluetooth-Based Data TransferYou can exchange data between your Bluetooth phone and other Bluetooth devices. If you want to exchange data between your phone and another device, that device must support Bluetooth and the Bluetooth function must be enabled. 1Select Switch On/Off > On from the Bluetooth settings list to enable the Bluetooth device. 2Select Devices list. 3Select Options > Search to search a Bluetooth device. When a Bluetooth device is found for the first time, authentication is required.Now you can exchange data between your phone and the other Bluetooth device. Bluetooth-Based Internet AccessConnecting your phone to a PC through Bluetooth function enables the PC to use the phone as a modem. This helps to set up a dial-up connection to the Internet. (This is particularly useful for laptop.)You can create Bluetooth-based Internet access through the built-in Internet wizard of the Windows operating system, or the Internet wizard supplied with the Bluetooth drive suite of the PC.
USB36 Note Windows 2000 and Windows XP are sup-ported.◆ Other Bluetooth OperationsYou can perform the basic settings for the Bluetooth functions.Select Settings > Connectivity > Bluetooth for the following operations.• Switch On/Off: To set the Bluetooth device to On or Off.• Search new devices: To search for new Bluetooth devices.• Devices: To view all detected Bluetooth devices.• Visibility: To set whether your phone can be found by other devices when the Bluetooth function is enabled.• Rename: To rename your phone.• My device information: To view the detailed infor-mation of your phone, such as the device name and device address. USB!警告!Warning • To use USB cable, please strictly obey the following rules. Otherwise, your phone or PC may be damaged. To connect your phone with a PC through USB cable, first connect the USB connector to your phone, and then connect the other end of the cable to the PC.To disconnect your phone from the PC, first disable the con-nection, then disconnect the USB connec-tor from the PC, and finally disconnect the USB cable from your phone.• If the PC cannot recognise your phone when connecting through the USB cable, power off and restart the PC and then retry.• Do not plug the USB cable in and out of your phone frequently.
USB37Connections12Accessing the Internet by USBConnecting your phone to the PC with the USB cable enables the PC to use the phone as a modem. This helps to set up a dial-up connection to the Internet. 1Select Settings > Connectivity > Modem and set the port to Modem via USB. 2Install Mobile Phone PC Assistant. After insert-ing the CD, follow the prompts to complete the installation. 3Connect your phone to the PC by using the USB cable. 4Ensure the USB device is shown in Device Man-ager/Port of your PC. 5Select one of the following methods to set up the dial-up connection. • Run the U1100 Dial-up Internet on the PC to create the dial-up connection.• Create Internet access through the built-in Internet wizard of the Windows operating sys-tem. Note Only Windows 2000 and Windows XP are supported.
3813SettingsYou can access the Settings screen by selecting Settings from the main menu. Phone settingsYou can change the settings of the phone, including Phone language, Input language, Date and time, Date format, Shortcuts, as well as Auto ON and OFF, Auto keypad lock, Keypad lock period.Phone language Your phone supports several languages. Select Set-tings > Phone settings > Phone language to select a language. In addition to these languages, you can also select Auto. This option is used to set the phone language to be the same as that used in your SIM card.Input language The option is used to set the language used to enter text. Date and timeThis option is used to change the system time for the phone.Date formatThis option is used to change the display format of the date of the phone. ShortcutsThis option is used to assign the frequently used functions to the scroll keys as shortcut keys.Auto ON and OFFThis option is used to set your phone to power on or off automatically. 1In the Auto ON and Auto OFF screen, set the cycle for Auto On and Auto Off respectively. Then select Options > Settings. 2Set the time for Auto On and Auto Off, and then select Options > Save to save your settings.
Display settings39Settings13Auto keypad lockThe auto keypad lock function can prevent the phone from reacting to the accidentally key-pressing. You can enable or disable the function.Keypad lock periodAfter enabling the auto keypad lock function, you can set the keypad lock period. If there is no operation on the phone within a preset period of time, the keypad is locked automatically. You can press and to unlock the keypad. Display settingsYou can change the settings for the phone display, including Wallpaper, Brightness, Keypad backlight, Backlight time, LCD sleep delay, Greeting message.• Wallpaper: To set the wallpaper layout for the home screen.• Brightness: To set the brightness of the screen.• Keypad backlight: To turn the keypad backlight on or off.• Backlight time: To set the backlight delay time for the screen.• LCD sleep delay: To set the duration between back-light off and LCD off.• Greeting message: To enter a greeting message that appears on the screen when you power on your phone. Message settingsYou can change the message settings including SMS, Email, Push messages, Broadcast, Voice Mail Number and Common phrases. Call settingsYou can change the settings for making calls.Call forwardingThis option is used to forward incoming calls. 1In the main screen, select Settings > Call set-tings > Call forwarding.
Call settings40 2Select the forwarding condition from All calls, If out of reach, If busy, and If not answer. 3Then select the forwarding type from Voice call, Fax call, Data call and All services. 4Select Activate or Deactivate to enable or dis-able the service. You can also select Check sta-tus to check the status of call forwarding service.Alternatively, you can select Disable all and then select one from the four items: Voice call, Fax call, Data call and All services. Then press to disable all call forwarding services of this type. Call barringThis option is used to set the call barring mode for the phone.Select Call settings > Call barring for the following options:◆ Calls Barring: 1Select the barring condition from All outgoing calls, International calls, International calls except home, All incoming calls and Incom-ing calls when abroad. 2Then select the barring type from Voice call, Fax call, Data call, and All services. 3Select Activate or Deactivate to enable or dis-able the service. You can also select Check sta-tus to check the status of call barring service.◆ Disable AllSelect one type from Voice call, Fax call, Data call and All services, and then enter the call barring password. Press to cancel all call barring ser-vices of each type.Call waitingThis option is used to enable or disable the call wait-ing function. You can also view whether the call wait-ing function is enabled by checking the status.The call waiting function is network-dependent. For more information, contact your service provider.
Call settings41Settings13Auto redialThis function is used to auto redial the dialed number if the dialing failed.Answer modeIt is used to set the mode for answering an incoming call. Two options are available: Any key and Send key.Auto answerThis option is used to select auto answering for incoming calls. Select Call settings > Auto answer for the following options.• Immediate answer: To answer an incoming call immediately.• Message: To auto send a text message that is pre-set and chosen from the Common phrases to the current caller.• Disable: To disable the auto answer function.Calling IDThis options allows you to select whether to display your phone number on the phone of the party who called you.If select Auto, whether your phone number will be shown on the called phone depends on the network.Select lineThis option is used to set the call line for your phone. Two options are available: Line 1 and Line 2.My numberThis function can be used to save your own phone numbers on the SIM card. You can select Options to edit or delete the records.Call barring passwordThis function is used to change the password for call barring.Select Call barring password from the Call settings screen. Then you can change the call barring pass-word.
Connectivity42 Note The old call barring password is provided by your network operator if it is the first time for you to change the password.Prompt to saveThis function is used to prompt whether to save the number when there is an incoming call. You can enable or disable this function. ConnectivityThe data connection function provides several data communication functions. You can synchronise data between your phone and a PC through a USB cable or Bluetooth. Your PC can use the built-in modem of your phone to access the Internet. For detailed infor-mation, refer to "Connections" on page 35. Network You can change the settings for the network.Select Settings > Network for the following options: Mode, Select network, Cell information, and My pub-lic land mobile network (PLMN) list. SecurityYou can change the settings related to the phone security.ResetThis option is used to reset your phone to the factory settings.Password lockThis option is used to enable or disable the "Phone lock" and "PIN lock". 1Select Phone lock/PIN lock. 2Press the up/down scroll key to select On or Off. 3Set passward:• Phone password: Enter the phone password.• PIN password: If the desired status is the same as the current status, just press . Con-versely, you need to select the desired status and then enter the PIN code.
Security43Settings13Change passwordYou can modify the phone password and PIN code. 1Select Security > Change password. 2Select one item from phone password, PIN code, and PIN2 code. 3Enter the old password (The initial phone pass-word of the U1100 is 0000). 4Enter a new password. 5Enter the new password again to confirm. Note • To modify the PIN code, you must set the "PIN lock" to "On" first.• If you enter the wrong PIN or PIN2 three times, the SIM card is locked. You need the PUK or PUK2 code to unlock the SIM card. If you enter the wrong PUK or PUK2 code 10 times in total, the SIM card is locked permanently.• PUK or PUK2 code are delivered with the SIM card. If you have not received one or have forgotten it, contact your service provider.Fixed dialer numberIf your SIM card supports the Fixed Dialer Number (FDN) function, you can set the limit for phone num-bers.DRM SettingDigital Rights Management (DRM) can protect the digital content from piracy and protect the provider’s interests. The digital content includes Java applica-tions and multimedia content such as images, audio and video. If the protected content cannot be accessed, it indicates that the corresponding copy-right is overdue or used up. • Select Settings > Security > DRM setting. Enter the correct phone password and press to confirm, and you can delete all the rights.
4414 Warnings and Precautions Electronic Device• Turn off your phone near high-precision electronic devices. The phone may affect the performance of these devices.• Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an elec-tronic medical device, consult the device manufac-turer to confirm whether the radio wave affects the operation of this device.• Pacemaker manufacturers recommend that a mini-mum separation of 15cm be maintained between a mobile phone and a pace-maker to avoid potential interference with the pace-maker. To achieve this use the phone on the opposite ear to your pace-maker and do not carry it in a breast pocket. HospitalPay attention to the following points in hospitals or health care facilities:• Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU).• Do not use your phone at places for medical treat-ment where phone use is prohibited.• When using your phone near someone who is suf-fering from a heart disease, turn down the ring tone volume or vibration properly so that it does not affect the person. Area with Inflammables and ExplosivesIn any area with inflammables and explosives, turn off your phone and do not take out, install or charge the battery, to avoid explosion and fire. Areas with inflammables and explosives include, but are not lim-ited to:• Gas station• Area for storing fuels (such as the bunk under the deck of a ship)• Device/Vehicle for transporting and storing fuels or chemical products
Storage Environment4514Warnings and Precautions• Area with chemical substances and particles (such as: granule, dust, metal powder) in the air• Area with the sign of "Explosives"• Area with the sign of "Turn off bi-direction wireless equipment"• Area where it is generally suggested to stop the engine or a vehicle Storage Environment• Do not place magnetic storage media such as mag-netic cards and floppy disks near the phone. Radia-tion from the phone may erase the information stored on them.• Do not put your phone, battery, or other accesso-ries in containers with strong magnetic field, such as an induction cooker and a microwave oven. Oth-erwise, circuit failure, fire, or explosion may occur.• Do not leave your phone, battery, or charger in a very hot or cold place. Otherwise, malfunction of the products, fire, or explosion may occur.• Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you are using the phone.• Do not subject your phone, battery, and charger to serious collision or shock. Otherwise, battery leak-age, phone malfunction, overheat, fire, or explosion may occur.• Do not put your phone in the back pocket of your trousers or skirt, to avoid phone damage while seated. Children Safety• Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guid-ance.• Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous.• Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings.
Operating Environment46 Operating Environment• The phone, battery, and charger are not water-resistant. Keep them dry. Protect the phone, battery and charge from water or vapor. Do not touch the phone with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur.• Do not use the phone in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur.• Do not turn on or off the phone when it is near your ears to avoid negative impact on your health.• When carrying or using the phone, keep the antenna at least one inch (2.5 centimeters) away from your body, to avoid negative impact on your health caused by radio frequency leakage.• If you feel uncomfortable (such as falling sick or qualm) after playing games on your phone for a long time, please go to see a doctor immediately.• On a thunder stormy day, do not use your phone outdoors or when it is being charged.• Do not touch the antenna when a call is going on. Touching the antenna may affect call quality and cause the phone to operate with more power. As a result, the talk time and standby time are short-ened.• The phone may interfere with nearby TV sets, radios and PCs.• In accordance with international standards for radio frequency and radiation, use phone accessories approved by the manufacturer only. Cleaning and Maintenance• Before you clean or maintain the phone, turn off the phone and disconnect it from the charger. Other-wise, electric shock or short-circuit of the battery or charger may occur.• Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and ben-zene) to clean the phone and the charge. Other-wise, part damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet.
Environmental Protection4714Warnings and Precautions• Keep the plug dry when you clean it, to prevent fire.• If the phone or any of its fittings does not work, turn to the local authorized service center for help. Environmental Protection• Please observe the local regulations regarding the disposal of your packaging materials, exhausted battery and old phone and please promote their recycling. Do not dispose of exhausted battery or old phone in municipal waste.• This HUAWEI device complies with Directive 2002/95/EC on the restriction of the use of certain haz-ardous substances in electrical and electronic equipment.: This symbol indicates that the equipment car-rying this mark must NOT be thrown into general waste but should be collected separately and prop-erly recycled under local regulations. Emergency CallsYou can use your phone for emergency calls. How-ever, connections in all conditions cannot be guaran-teed. You should never rely solely on the phone for essential communications. Battery• Use the battery approved by the manufacturer only. Otherwise, explosion may occur.• Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode.• Do not connect two poles of the battery with con-ductors such as cables, jewelries or any other metal material. Otherwise, the battery is short-cir-cuited and it may burn your body.• Do not disassemble the battery or solder the bat-tery poles. Otherwise fluid leakage, overheat, fire, or explosion may occur.• If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open
Charger48flame to avoid fire or explosion. Then turn to an authorized maintenance engineer for help.• The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours.• If the battery fluid contacts your skin or cloth, wash with clean water immediately to avoid irritation to the skin.• If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your eyes can be hurt. Wash with clean water and go to see a doctor immediately.• If there is battery deformation, color change or abnormal heating while you charge or store the bat-tery, take it out immediately and stop using it. Oth-erwise, battery leakage, overheat, explosion, or fire may occur.• When installing the battery, do not push the battery by force lest battery fluid leak out or the battery crack.• Do not take out the battery when the phone is turned on.• If you do not use the battery for a long time, store it in normal temperature after charging. Charger• Use the charger approved by the phone manufac-turer only. Any violation of this rule may result in fire or malfunction of the charger.• Do not short-circuit the charger. Short-circuiting the charger may cause fire or malfunction of the charger.• If the power cord is damaged (for example, the lead is exposed or broken), or the plug becomes loose, stop using the power cord at once. Otherwise, elec-tric shock, short-circuit of the charger, or fire may occur.• Keep the charger dry. Once water or other liquid leaks into the charger, electrical leakage or other faults may occur.• Do not use the charger in a dusty and damp envi-ronment.• Keep the power cord away from any heating appli-ance.
Using the USB Cable4914Warnings and Precautions• Ensure the charger is properly plugged into the power socket properly when charging the battery. Improper insertion may result in electric shock, fire, or explosion. To unplug the charger, pull the plug off rather than tear off the power cord.• Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur.• When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused.• Once the liquid such as water leaks into the charger, remove the plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur. Using the USB CableTo use the USB cable, please strictly obey the follow-ing rules. Otherwise, your phone or PC may be dam-aged:• To connect your phone and PC with the USB cable, connect to the phone at first, and then connect to the PC.• In the process of communication between your phone and PC, it is strictly forbidden to plug or pull out the USB cable.• To disconnect your phone and PC from the USB cable, disconnect from the PC at first, and then dis-connect from the phone. Certification Information (SAR)THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD.Your mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields).Governments around the world have adopted com-prehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection)
Certification Information (SAR)50and IEEE (Institute of Electrical and Electronics Engi-neers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish per-mitted levels of radio wave exposure for the public. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in mea-surements.Specific Absorption Rate (SAR) is the unit of mea-surement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the mobile phone while operating can be well below the value. This is because the mobile phone is designed to use the minimum power required to reach the network.All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested according to the technical standard-EN 50361 and does not exceed the limit established by the European Council Recommendation: 1999/519/EC for safe exposure. The tests are performed in using positions (that is, at the ear) as required by the EN50361 for each model.The SAR limit adopted by the 1999/519/EC is 2.0 watts/kilogram (W/kg) averaged over ten gram of tis-sue. The highest SAR value for this device type when tested at the ear is 0.884 W/kg, and when properly worn on the body is 1.08 W/kg.All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (that is, at the ear and worn on the body) as required by the FCC for each model. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body with an accessory that contains no
Certification Information (SAR)5114Warnings and Precautionsmetal part. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tis-sue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 1.43 W/kg, and when properly worn on the body is 1.1 W/kg.This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. EU Declaration of Conformityaccording to the Radio Equipment and Telecommuni-cations Terminal Equipment Directive 1999/5/ECFor the following equipment Product: WCDMA/GPRS/GSM Mobile PhoneType Designation/Trademark: HUAWEI/U1100Manufacturer's Name: Huawei Technologies Co.,Ltd.Manufacturer's Address: Bantian, Longgang District, Shenzhen, 518129, Guangdong, P. R. China.is herewith confirmed to comply with the require-ments set out in the Council Directive1999/5/EC for radio equipment and telecommunications terminal equipment. For the evaluation of the compliance with this Directive, the following standards were applied:Safety: EN 60950-1:2001 First Edition;Health: EN 50360:2001; EN 50361:2001;EMC: EN 301 489-1 V1.4.1; EN 301 489-24 V1.2.1; EN 301489-7 1.2.1; EN 301489-17 1.2.1;Radio: EN 301 511 V9.0.2; EN 301 908-1 V2.2.1; EN 301 908-2 V2.2.1; EN 300 328 V1.4.1;Responsible for making this declaration is the: Manu-facturer.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio fre-
Certification Information (SAR)52quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow-ing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications made to this equipment not expressly approved by HUAWEI may void the FCC authorization to operate this equipment.
5315Acronyms and AbbreviationsDCF DRM Content FormatDRM Digital Rights ManagementFDN Fixed Dial NumberGPRS General Packet Radio ServiceGSM Global System for Mobile communica-tionOTA Over-The-AirPIN Personal Identification NumberPLMN Public Land Mobile NetworkPUK PIN Unblocking KeySD Secure Digital CardSAR Specific Absorption RateSTK SIM Tool KitURL Universal Resource LocatorUSB Universal Serial BusWAP Wireless Application ProtocolWCDMA Wideband Code Division Multiple Access
5416AppendixThe phone supports image files, video files and audio files of many formats. For details, see the following table. Note In some cases, the preceding media for-mats may not be supported.File type FormatsImage JPG, PNG, BMP, GIF, BCI, WBMP, SVG, and SVGZ. Audio MP3, AAC/AAC+, AMR, MID, WAV(ADPCM), MMF, QCP, and XMF/DLS.Video 3GP, MP4, 3G2, and PMD.
1"123" Numeric Input Method .................................. 15Access Codes .......................................................... 8Accessing the Internet by USB .............................. 37Adding/Deleting Group Members........................... 17Alarm Clock............................................................ 26Answer mode ......................................................... 41Answering or Rejecting Calls ................................. 10Auto answer ........................................................... 41Auto keypad lock.................................................... 39Auto ON and OFF .................................................. 38Auto redial .............................................................. 41Back and Side View ................................................. 3Battery.................................................................... 47Bluetooth................................................................ 35Bluetooth-Based Data Transfer ............................. 35Bluetooth-Based Internet Access........................... 35Bookmarks ............................................................. 34Bottom View ............................................................ 3Broadcast Inbox ..................................................... 24Browsing Pre-set Web Pages ................................ 33Calculator ............................................................... 30Calendar Functions................................................ 27Calendar ................................................................ 27Call barring password ............................................ 41Call barring............................................................. 40Call forwarding ....................................................... 39Call settings ........................................................... 39Call waiting............................................................. 40Calling ID ............................................................... 41Calls....................................................................... 11Certification Information (SAR).............................. 49Change password.................................................. 43Charger.................................................................. 48Charging the Battery................................................ 7Charging with a Cable Charger ............................... 7Children Safety ...................................................... 45Cleaning and Maintenance.................................... 46Common Phrases.................................................. 25Connectivity ........................................................... 42Creating a Text Message ...................................... 19Creating an Email .................................................. 21Currency converter ................................................ 31Date and time ........................................................ 38Date format............................................................ 38Display settings ..................................................... 39DRM Setting .......................................................... 43Electronic Device................................................... 44Email Settings........................................................ 23Email...................................................................... 21Emergency Calls ................................................... 47Enter URL .............................................................. 33Environmental Protection ...................................... 47FCC Statement...................................................... 51Fixed dialer number............................................... 43Groups ................................................................... 17Home Screen........................................................... 3Hospital.................................................................. 44Icon Description..................................................... 11Index
2Input Different Languages...................................... 15Input language ...................................................... 38Internet Settings..................................................... 34Introduction to the Menu .......................................... 4Keypad lock period ................................................ 39Loading/Unloading the SIM Card............................. 6Mailboxes............................................................... 22Making a Voice Call ............................................... 10Making Calls from Call Log .................................... 13Making Calls from the Contacts ............................. 16Making or Answering Calls .................................... 10Making Voice Calls Using SDN.............................. 10Managing a Group ................................................. 18Memo .................................................................... 29Message settings ................................................... 39My number ............................................................. 41Network ................................................................. 42New Schedule........................................................ 27New Tasks ............................................................. 29Operating Environment .......................................... 46Operations During a Voice Call.............................. 11Operations ............................................................. 11Other Operations for the Homepage...................... 33Other Operations ................................................... 13Other Operations ................................................... 17Packing List.............................................................. 1Password lock ........................................................ 42Phone language .................................................... 38Phone settings ....................................................... 38Powering Off............................................................ 8Powering On............................................................ 8Powering On/Off ...................................................... 8Prompt Interface for a Schedule............................ 28Prompt Interface for a Task ................................... 29Prompt Interface for an Alarm ............................... 26Prompt to save ...................................................... 42Push Inbox Settings............................................... 24Push Inbox............................................................. 24Reset ..................................................................... 42Searching for a Contact......................................... 16Security.................................................................. 42Select line .............................................................. 41Service dial number ............................................... 32Setting Alarm Clocks ............................................. 26Shortcuts ............................................................... 38SIM ToolKit ............................................................ 29SMS Mailboxes...................................................... 19SMS Settings......................................................... 21Stopping the Alarm Clock ...................................... 26Stopwatch.............................................................. 32Storage Environment ............................................. 45Symbol Input Method............................................. 15Synchronise........................................................... 30T9 Input Method .................................................... 14Task....................................................................... 29Tasks Functions .................................................. 29Text Messages ...................................................... 19Timer ..................................................................... 32
3Traditional Input Method ....................................... 14Viewing Push Messages........................................ 24Unit converter......................................................... 31Vodafone live! ........................................................ 33Voice Mail number ................................................. 25World Time............................................................. 32USB........................................................................ 36Using the USB Cable ............................................. 49Your Phone .............................................................. 2

Navigation menu