Huawei Technologies U1305 Mobile Phone User Manual U1305

Huawei Technologies Co.,Ltd Mobile Phone U1305

Contents

Users Manual II

Your Phone 5Getting to Know Your Phone1Introduction to the MenuYour phone provides an extensive range of functions. You can use these functions by navigating the follow-ing menus: Entertainment, Browser, Music, Camera, Messaging, My Files, Organizer & Tools, Contacts, Calls, Profiles, Video call and Settings. 1In the standby mode, press to display the main menu. 2Press the scroll key to scroll through the menu, and then press to select. 3If the menu contains further submenus, repeat step 2. 4Use the selected function according to the prompts on the screen. 5Select Back to return to the previous menu. Press to return to the standby mode.
62Getting Started Loading the SIM CardLoad your SIM card before using your phone. To use the SIM card properly, please read the following instructions carefully. Note • Keep the SIM card out of the reach of chil-dren.• The SIM card and its metal contacts can be easily damaged by scratching or bend-ing. Ensure care when you carry, load or remove it.• Always disconnect the charger from the phone before loading or removing the SIM card.To load the SIM card, do as follows: 1Position the card at the card slot entrance, mak-ing sure it is facing the same way as shown in the diagram below, with the notched corner at the top right. Then slide in as shown. 2Fit the battery into the battery slot on back of the phone. Press the battery down until it clicks into place. 3Slide the back cover to the phone.
Unloading the SIM Card 7Getting Started2 Unloading the SIM CardOnly unload the SIM card and the battery after pow-ering off your phone. Otherwise, your phone may be damaged.To unload the SIM card: 1Unload the back cover out of the phone. 2Please unload the battery according to the fol-lowing picture. 3Press the SIM card with one finger and slide it out of the slot. Charging the BatteryBefore charging the battery, please read the following precautions carefully. Note • When you charge the battery for the first time, please charge it for a minimum of 12 hours.• The battery discharges even while not being used. If you have not used it for a long time, please recharge it first.• The charging time depends on the envi-ronmental temperature and the age of the battery.• The battery can be recharged but eventu-ally wears out. If the battery lasts for a
Loading/Removing a Memory Card8shorter time period than usual after being charged normally, replace it with a battery of the same type.• Do not strike, throw or cause any kind of violent shock to the battery, otherwise liq-uid leakage, body damage, overheating, explosion or fire may occur.• Charge the battery by using the charger supplied with your phone.Charging with a Cable ChargerBefore charging the battery with a cable charger, ensure that the battery has been properly loaded into your phone.To charge the battery, do as follows: 1Insert the plug of the charger into the connector of the phone as shown in the following figure. 2Plug in the connector of the charger to a power socket. Note • When the battery power level is very low, the phone makes alert sounds and dis-plays a prompt. When the battery power level is too low, the phone will power off automatically.• When the battery is being charged, the charging indicator blinks continuously. When the charging indicator stops blink-ing, it indicates that the battery is full. Loading/Removing a Memory CardThe phone supports a memory card (micro-SD) with a capacity up to 2 GB. 1Unload the back cover out of the phone.
Powering On/Off 9Getting Started2 2Insert the memory card into the slot, as shown in the following figure. 3To remove a memory card, unload the back cover out of the phone. Then press the memory card gently. Now the memory card will pop up automatically. Then take it out as shown in the following figure. Powering On/OffPowering OnEnsure that the SIM card is in your phone and that the battery has been charged.Press and hold to power on your phone.Powering OffPress and hold to power off your phone.Access CodesIf you have set the phone password and the PIN is ON, you have to enter the corresponding access codes when you power on your phone. For setting and changing the access codes, please refer to "Set-tings/Security Setup" on page 51.◆ Phone PasswordThe phone password is used to protect your phone from unauthorized use. The phone password is preset as 0000 for your phone.
Powering On/Off10◆ PINThe personal identification number (PIN) code is used to protect your SIM card from unauthorized use. The PIN code is usually provided when you get the SIM card from your service provider. If you have not received a PIN code or if you have forgotten it, con-tact your service provider.◆ PIN2Some SIM cards provide a PIN2 code. Some special functions such as the "Fixed Dialer Number" are not available until you enter the PIN2 code. At the same time, your SIM card should support these functions.◆ PUKTo unlock a locked SIM card, you need to enter the PIN Unblocking Key (PUK) code. The PUK code is usually provided when you get the SIM card from your service provider. If you have not received a PUK code or if you have forgotten it, contact your service provider.◆ PUK2Some SIM cards provide a PUK2 code that is used to unlock a locked PIN2 code. The PUK2 code is usu-ally provided when you get the SIM card from your service provider. If you have not received a PUK2 code or if you have forgotten it, contact your service provider.
113Call Service Making or Answering CallsMaking a Video CallYou can make a video call to other person whose phone also supports video calls. 1Enter or edit a phone number in one of the fol-lowing ways:• Enter a phone number through the keypad.• Select a number from the Calls screen.• Select a number from the Contacts screen. 2Press to dial. 3Press to end the video call. Note To delete a wrong number, press once to delete the digit to the left of the cursor.Making a Voice Call 1Enter or edit a phone number in one of the fol-lowing ways:• Enter a phone number through the keypad.• Select a number from the Calls screen.• Select a number from the Contacts screen. 2Press to dial. 3Press to end the call.Making Voice Calls Using SDNYou can make a voice call through speed dialing. For instructions on assigning speed dialing numbers, refer to "Contacts/Other Operations" on page 17.To make a call by speed dial number (SDN), press and hold the number key until the phone dials the corresponding phone number.Answering or Rejecting CallsYou can set the answer mode to Any key or Send key. For details, refer to "Settings/Call Settings/Answer mode".The following describes how to answer or reject a call in different answer modes:
Operation DescriptionAnswer a call• If the answer mode is Any key, press any key. except and .• If the answer mode is Send key, press .• If the headset is in use, press the con-trol key on the headset.Reject a callPress or select Options > Reject.End a call • If the headset is not in use, press .• If the headset is in use, press the con-trol key of the headset.Reply by messageSelect Options > Reply to send a pre-defined message to the caller.Operations During a Voice Call12You can also set the auto answer mode to Immedi-ate answer, Text message or Recorded voice.For details, refer to “Settings/Call settings/Auto answer”. Operations During a Voice CallIcon Description: A call is ongoing.: The call is on hold.: There is a new incoming call during a call.OperationsDuring a voice call, you can select Options to per-form the following operations.•Hold/Resume: To hold or resume the call during a call.•End: To end all calls, the active call, the current call or the on hold call.• New Call: To make a 3-party call during a call.• Handsfree/Earpiece: To switch between the Hands-free and the Earpiece modes during a call.•Start recording/Stop recording: to record or stop recording the conversation.
Operations During a Video Call 13Call Service3• Other applications: To access the SMS screen, the Contacts screen, the Call Log screen or Calendar screen.• Answer/Reject: Your phone allows you to handle two calls simultaneously. During a call, if there is a new incoming call, select Options > Answer to answer it or select Options > Reject to reject it.• Swap: To swap between calls during a 3-party call.• Conference call/Private call: To switch to the con-ference call during a 3-party call or to talk with a party privately during a conference call.•Mute/Unmute:To mute or unmute your voice during a call. Operations During a Video CallIcon DescriptionPress the up or down scroll key to adjust the brightness.Press the left or right scroll key to zoom in or zoom out.Press the volume keys to adjust the vol-ume./Press to switch between the loud-speaker mode and the earpiece mode.Icon DescriptionOperationsDuring a video call, you can press to hold the call and send a preset file to the other party. You can press again to resume the call. Before you use the function, you can preset a file in Settings/Video call/Send specific file.During a video call, you can select Options to per-form the following operations.•Camera: To forbid or allow the video from your side.• Audio:To forbid or allow the audio from your side.• Outer/Inner Camera: To switch between the main lens and the assistant lens.•Picture mode: To switch display.Icon Description
Calls14• Image quality: To set the image quality to fine qual-ity or more smooth.• Play file: To play a media file.•Handsfree/Earpiece: Switch between the loud-speaker mode and the earpiece mode.• Record: To record a video clip. A recorded video clip is saved to the My Files/Videos directory.• Other applications:To access the Contacts screen, the Messaging screen, the Calls screen or the Calendar screen. CallsThe recently dialed calls, received calls and missed calls are saved automatically. Select Calls in the main menu and then press the left/right scroll key to select All calls, Missed, Received or Dialed. Then select Options for the fol-lowing options.•Send message: To send a message.• Save number: To save the numbers of the selected record.•Call: To make a voice call or a video call.• Display mode: You can select Normal to display all records or select Simple to ignore the duplicated records.•Delete: To delete the selected record.• Mark/Unmark: To mark/unmark a record or all records.• Calls status: To display the information on voice calls, video calls and data services. In the voice call, video call and data page, you can select Reset to clear all records.
154Text InputYou can use the keypad to enter alphanumeric char-acters and symbols. For example, you can add entries to the contacts, write messages or schedule events on the calendar. Note While entering text:•Press to switch between input meth-ods. Press and hold the key to enable or disable the T9 input mode. •Press to display the symbols list.Press and hold the key to set the input language. • Press to delete the letter before the cursor. T9® Input MethodWith the T9 input method, you can easily and quickly enter words. T9 is a predictive text entry mode. It allows you to easily and quickly enter words. Press the relevant key that corresponds to the desired letter and T9 will offer you candidate words.Press each key carrying the desired letter once, and then the predictive text scheme will present the can-didate words composed by the letters you have entered in the drop-down menu.For example, to enter the word "good" with the T9 input method, follow these steps. 1Press successively the keys , , , and which "g", "o", "o", and "d" belong to, and the candidate words "good", "home" etc. com-posed by these letters will be shown in the drop-down menu. 2Use the up/down scroll key to select "good". Then press to enter a space for entering the next word. Note Press repeatedly and you will see "T9 Abc", "T9 abc" and "T9 ABC" on the upper left corner of the screen successively. It indi-cates the words to be entered will be first letter capitalized, in lower case or in upper case. Traditional Input Method When T9 input method is off, you can use the tradi-tional input method for entering alphabetic charac-
"123" Numeric Input Method16ters. Repeatedly press the key that carries the letter to be entered when it appears on the screen.For example, to enter the word "Hello" with the tradi-tional input method, follow these steps. 1Press that carries "h" repeatedly and all let-ters carried by this key will be displayed succes-sively on the screen. You can scroll through this list and select the character you want. Stop when you see an "h" on the screen. 2After entering the first letter, you can directly press another key (except ) to enter the next letter. If the next desired letter is on the same key as the current one, wait until the cursor appears to the right of the current letter and then you can enter the next one. 3Enter "e", "l", "l" and "o" in the same way. Note Press repeatedly and you will see "Abc", "abc" or "ABC" on the upper left cor-ner of the screen successively. It indicates the words to be entered will be first letter capitalized, in lower case or in upper case. "123" Numeric Input MethodIn a text editing screen, press and hold the character/number keys to enter corresponding numeric charac-ters.You can also press successively the key to switch to the "123" numeric input method, and enter corresponding numeric characters by pressing the character/number keys. Symbol Input MethodYou can press to display the symbols list and then select Recent to display recent symbols.You can also press to input the commonly-used symbols in a text editing screen. Input Different LanguagesIn a text editing screen, Press and hold the key to set the language for the text.
175ContactsContacts enables you to save and manage such information as phone numbers and addresses of your contacts. You can save such information in your phone or your SIM card. You can also assign fre-quently-used numbers to speed dialing keys for your convenience. Making Calls from the ContactsYou can make a voice/video call with a contact selected from the contacts list. 1In the Contacts screen, press the left/right scroll key to select Contacts. 2Select a contact and select Options > Call. Then, you can select Voice call or Video call to make a call. Alternatively, you can select Edit before call to edit the number before making the call. Searching for a ContactYou can find a contact from the contacts list easily and quickly by using this function on the Contacts screen. Select Options > Search, and then enter the contact name you are searching for. The contact is displayed.You can also use quick search in the contacts list screen. You can find a contact by entering the initials of the first name or the last name of the contact. For example, to find a contact named "Alice Green", enter the initials "a" or "g". This contact is displayed in the candidate list. Viewing Contacts in Phone/SIMIn the Contacts screen, select Options > View Contacts in Phone/View Contacts in SIM. You can display the contacts list saved in the phone or that in the SIM card. You can also select Options > Set-tings to set the default contact list displayed in the contact screen. Other OperationsIn the Contacts screen, select Options for the fol-lowing options.
Groups18•Details:To view the detailed information of the con-tact.•Call: To make a voice call, a video call or edit the contact before call. •Send message: To send a message or Email to the selected contact. •Add new contact: To create a new contact.•Management: To back up your contacts from your phone to a memory card or from your memory card to your phone.•Search: To find a contact from the contacts list.•Send contact: To send a contact to other devices supporting Message or Bluetooth.•Copy to SIM/Copy to phone: To Copy one or more contacts from your phone to the SIM card or from your SIM card to the phone.•Delete: To delete the selected contact.•Mark/Unmark: To mark/unmark a record or all records in your phone and SIM card.•View contacts in Phone/SIM: To display the con-tacts list saved in the phone or that in the SIM card.•Speed Dial Number: To assign often-used num-bers to speed dialing keys "2" to "9".•My business card: To save your own information to a Business Card. You can send the information by Message or Bluetooth.•Settings: To set the default contact list displayed in the contact screen, to sort the contacts on the Contacts screen.•Memory status: To view the memory status of both your phone and SIM card. GroupsYou can rename a group, add group members, or delete a group member.Adding/Deleting Group MembersYou can add a member to a group in your phone or delete a member from it. 1In the Contacts screen, press the left/right scroll key to select Groups . 2Select a group and press to view the details.
Groups19Contacts5 3Select Options > Add new users. Select a con-tact and press Add. The member you added is displayed in the group member list.To delete a group member, select a member from the group member list, and then select Options > Remove.Managing a Group 1In the Contacts screen, press the left/right scroll key to select Groups. 2Select a group and select Options for the follow-ing options.•Details: to view the details of a group.• Rename: to change the name of a group.•Send message: to send message or email to all members of a group.•Remove all members: to delete all members of the group.
206Messaging MessagesThe maximum content for a single text message is 160 characters. If the characters you enter exceed this limit, the text is divided into two or more continu-ous messages when it is sent.Creating a MessageWith this option, you can create new SMS, MMS, and Email. 1Select Messaging > Create message in the main menu.•Message: To access the SMS or MMS editing screen.•From template: To edit the SMS or MMS from template.•Email: To access the email editing screen. 2After editing the message, press to add a recipient’s number. 3 Press or select Options > Send to send the message.Messages MailboxesThe phone provides four mailboxes for messages, namely, Inbox, Drafts, Outbox and Sent.◆ InboxYou can save the received messages in Inbox.Icons in InboxIcon Descriptiona read SMS or a read message reportan unread SMS or an unread message report a read MMSan unread MMS A read Push messageAn unread Push messageViewing Messages in Inbox 1Select Messaging > Inbox.
Messages21Messaging6 2Press the up/down scroll key to view the mes-sages and then press to view the details. 3You can select Options for the following opera-tions.•Play: To play the multimedia message.•Reply: To reply the message.•Forward: To forward the message.•Delete: To delete the message.•Call sender: To call the message sender or edit befoe call.•Info.: To view the details of the message. •Save text/picture: To save the text or pictures of the MMS.• Save as template: To save this message as a template.◆ DraftsThe Draft is used to save the messages you created and saved.Icons in Drafts: A text message saved to the phone.: A multimedia message saved to the phone.Viewing and Editing Messages in the Draft 1Select Messaging > Drafts. 2Press the up/down scroll key to select a mes-sage and press to edit it.◆ OutboxOutbox is used to save the messages that failed to be sent.Icon in Outbox.: A message that fails to be sent.Viewing Messages in the Outbox 1Select Messaging > Outbox. 2Press the up/down scroll key to select a mes-sage and press to edit it.◆ SentSent is used to save the messages that have been sent successfully.Icons in Sent : A text message has been sent. : A multimedia message has been sent.
Email22Viewing Messages in Sent 1Select Messaging > Sent. 2Press the up/down scroll key to select a mes-sage and press to view the details. 3You may select Options for operations such as Play, Forward, info., Save Text, Save as tem-plate.Message SettingsYou can change the message settings by performing the following steps. 1Select Messaging > Settings > SMS & MMS from the main menu. 2Set the parameters related to messages:•Receiving settings: To set parameters related to retrieval of messages.•Sending settings: To set parameters related to sending messages.• Signature: To set whether your signature will be sent along with the message. You can edit the signature while creating a new message.•Font size: To set the size of the character entered in the message. •Reply settings: To set whether to reply to a message with the original text. •MMS Account: To set the MMS account.• Voice mail: The voice mail number is already preset for you in the phone. • Save unknown number: This function is used to prompt whether to save the number when there is a new message. EmailBefore sending an email, please set an email account first. For details, please refer to "Email Settings" on page 24.Creating an Email 1Select Messaging > Email from the main menu. Select Options > New Email to access the email editing screen. 2Select 【To】 or 【Cc】and press .
Email23Messaging6•Select Add from contacts or Add from groups to select an email address.•Select Enter recipient to directly enter the email address. 3In the email editing screen, select Subject and press to edit the content. 4In the email editing screen, select the Message text box to edit the content. 5In the email editing screen, select Options > Add attachment to attach picture, music, video, or eBook. 6In the email editing screen, select Options > send to send the email. MailboxesYour phone provides five mailboxes for email, namely, Inbox, Drafts, Sent, Outbox and Blocked.◆ InboxAll Emails received are saved in the Inbox.Icons in Inbox: A read email.: An unread email without attachment.: An unread email with attachment.Viewing and Editing Emails in Inbox 1Select an email and press to view the con-tent. 2In the Details screen, select Options for the fol-lowing operations:• Reply: To reply to the email sender.• Reply all: To reply to the email sender and all email receivers except the replier.• Add to contacts: To save the details of the sender to the contacts. • Forward: To forward the selected email.• Delete: To delete the selected email.• Call sender: To call the email sender by a voice call, a video call or edit before call.◆ DraftsThe saved new emails are saved in the drafts.Icon in Drafts: Emails to be saved.
Email24Viewing and Editing Emails in Drafts 1Select the desired email in the drafts and press to access the editing screen. 2Edit the related information. For details, perform the same operations as in creating an email.◆ SentThe emails sent to server are saved in the sent box.Icon for Sent : A sent email.Viewing and Editing Emails in Sent 1Select an email and press to access the editing screen. 2Edit the related information. For details, perform the same operations as those of the Inbox.◆ OutboxThose emails which failed to be sent are retained in the Outbox.Icon in Outbox: Emails failed to send.Viewing and Editing Emails in Outbox 1Select an email and press to access the Resend screen. 2Edit the related information. For details, perform the same operations as in creating an email.◆ Blocked messagesThe blocked emails are saved in this folder. You can select Messaging > Settings > Email to set the blocking conditions.Email Settings 1Select Messaging > Settings > Email and select an account. 2The related account information contains: General, Incoming, Outgoing and Online help. 3Return to the Account screen. Select Options > Set as default to activate this account.After completing all settings, press Back. Note For the account settings, contact your ser-vice provider.
Broadcast Inbox 25Messaging6 Broadcast InboxThe broadcast messages are saved in the broadcast inbox. You can set the broadcast message.Select Messaging > Settings > Broadcast to set the following items.• Service: to enable or disable this service.• Subscription: to subscribe to broadcast channels or cancel the subscription.• Language: to select the language of the broadcast. • Silent alert: to set whether to use an alert when there is a new broadcast message.• Auto delete: to set whether to auto delete earlier messages when the broadcast inbox memory is full. TemplatesYou can save the frequently-used SMS or MMS as template for your convenience.
267MusicMusic enables you to manage your music files easily and conveniently. It also enables you to purchase a wide variety of latest music. Music LibraryYou can play various music files, including those sup-plied with the phone, recorded by using the phone, downloaded from the Internet, and attached to email. You can also enjoy the online audio files.In music library, select All tracks > Add tracks, you can add the music files in the handset or memory card to the music library. You can also select Options > Refresh, and all music files in the music folder of the handset and memory card are automatically added to the music library.Function Options During PlayingDuring playing the music file, select Options for the following operations.•Now playing: To access the current playlist.•Playlists: To access the music playlist.•Bookmarks: To access the bookmark list.•Info.: To view the information of the music files.•Shuffle: To enable/disable the random play.•Loop: To play current music circularly, loop all music or close.•Equalizer: To select the music style.•Streaming setting: To s et the streaming setting.•Exit: To exit the music play screen.Screen Operations During PlayingDuring playing the music file, you can perform the fol-lowing operations on the music file.Operation DescriptionPress the up scroll key to access the current playlist.Press the down scroll key to go back to the beginning of the current music file.Press the right scroll key to access the next music file. Press and hold the right scroll key to fast forward the current music file.
Playlists27Music7 PlaylistsSelecting this option, you can rename and edit the playlist as well as play the music in the playlist.Press the left scroll key to access the last music file. Press and hold the left scroll key to fast backward the current music file./Press to pause the playing. Press again to resume the playing.Press the volume keys to adjust the vol-ume.Operation Description
288Organiser & ToolsThis function provides you with various helpful tools. You can access the Organiser & Tools screen by selecting Organiser & Tools from the main menu. AlarmsYou can set several alarm clocks. You can also set alarm time, alarm tones and the cycle period for alarm clocks. Setting Alarm ClocksEnter alarm function, you can select one alarm from the list, and then press to set an alarm clock.In the screen for editing alarm clock, you can set the following items: alarm time, message, the sound function, the vibration function, Alert tone, the snooze function, the alarm cycle.Alarm PromptWhen it is time for an alarm clock to ring, the selected alarm tone is played and a prompt displayed. You can stop the ringing by pressing any key. The prompt allows you to snooze or stop the alarm prompt.If your phone is powered off, the alarm clock will still ring. When the alarm rings, you can choose to power on the phone.Stopping the Alarm ClockSelect an alarm clock from the list, and press the left function key to deactivate it. CalendarWith this function, you can view the calendar and manage your schedules.New ScheduleEnter calendar function, you can select Options > New to create the schedule events for the current day.In the screen for editing schedule, you can set the fol-lowing items: schedule subject, start/end time of the schedule, schedule location, schedule category, schedule content, whether the sound is on, the vibration function, alert tone, alert type, alert cycle, and alert image.
Task29Organiser & Tools8 Note You can create up to 500 schedules in total and 15 for each day. While creating a new schedule, you need to set the alarm on before setting the alarm time, the alarm cycle, the alarm tone and the image.Calendar FunctionsEnter calendar function and select Options. You can perform the following operations.•New: To create a new schedule.• Go to...: To go to a certain date directly from the Month view screen.• Display: To view all events, specified events, Calen-dar files and to back up all schedules to a memory card.•View mode: To view the calendar in three different modes: month view, week view, and day view.• Delete event: To delete all past events, specific period events or all events.•Management: To backup all schedules to the mem-ory card or to restore all schedules from the mem-ory card to the phone.• Settings: To set save location, view mode, week begin day.• Memory status: To view the memory status, includ-ing the used space and the total space.Schedule PromptWhen it is time to remind you of a schedule, the selected ringtone is played and a prompt displayed. You can stop the ringing by pressing any key. From the prompt, you can snooze or stop the prompt. TaskYou can define and manage tasks to be conducted before a certain time. Your phone can remind you of these tasks and track them automatically.Select Task from Organiser & Tools.The tasks are classified into three kinds: pending, done, and all tasks. You can define up to 1000 tasks on your phone.
Memo30New TasksTo define a new task, press or select Options > New on the Tasks screen. In the screen for editing task, you can set the follow-ing items: the subject of the task, the deadline, the priority level, the task status, the task alert, the vibration function, the alert time, the task type.Tasks Functions On the Tasks screen, you can also perform the fol-lowing operations: edit, new, set as done, send by Message, Email or Bluetooth, copy, day view, delete, delete all, and view the memory status.Task PromptWhen it is time for the phone to remind you of a task, it rings automatically and a prompt interface is dis-played. You can stop the ringing by pressing any key. From the prompt , you can snooze or stop the task prompt. MemoYou can store important events on your phone. You can save up to 100 such memos.Select Memo from Organiser & Tools. If there is no memo, you need to create one when you access the Memo screen.On the Memo Pad screen, you can perform the fol-lowing operations: edit, new, delete, send by Mes-sage or Bluetooth, view the memory status and delete all. SynchroniseYou can synchronise contacts with your personal phone book stored on a network server. This service is network dependent. Contact your service provider for further details. Select Synchronise from Organiser & Tools to cre-ate or edit a profile. Select Options > View log to view the latest synchronisation log. Before you use the synchronise function, you may need to set a pro-file.
Calculator31Organiser & Tools8 1To create a profile, select Options > New to cre-ate a profile. 2Press the left/right scroll key to switch between Synchronise items, Server Setting, and Network profile. 3In the Synchronise items screen, select the item to be synchronised and press to con-firm it. Then, enter the database name, user name, and password of the synchronisation items. 4In the Server Setting screen, enter server address, user name, password. 5In the Network profile screen, enter the proxy server address and the port. Then, enter the net-work access point and select a desired profile. 6Return to the previous menu and select Options > Synchronise to start synchronising. Note This service is not available in all networks. For details, contact your service provider for more information. CalculatorYou can perform addition, subtraction, multiplication, division and extraction operations on your phone.• Press the number keys to enter the figures.• Press the scroll key to enter the operators.• Press the left function key to clear.• Press the right function key to exit Calculator.• Press to enter a radix point.• Press to delete the character to the left of the cursor.• Press to perform extraction.• Press to enter an equal mark. Unit converterYou can convert units of length and weight between different systems on your phone. 1Press the up/down scroll key to switch between the setup items. 2On the unit type selection bar, press the left/right scroll key to select weight or length.
Currency converter32 3Press the number keys to enter a numeric value to be converted in the Input bar. 4On the From bar, press the left/right scroll key to select the unit to be converted from. 5On the To bar, press the left/right scroll key to select the unit to be converted to.Press or select CE to clear the numeric values you entered. Currency converterYou can convert a value from one currency to another using your phone.To using this function, access the Currency con-verter screen, and then press the up/down scroll key to switch between the setup items. 1On the Input bar, press the number keys to enter a numeric value to be converted. 2On the From bar, press the left/right scroll key to select the currency to be converted from. 3On the To bar, press the left/right scroll key to select the currency to be converted to. 4On the Rate bar, enter the currency rate.Then you can view the conversion result.Press to clear the numeric values you entered.Select Setting in the currency converter screen, and you can select frequently used currency units. This makes it easy to switch between selected units in the From or To bar. Voice recorderYou can record voices or sounds on your phone. On the standby screen of the voice recorder, you can select Options to set the recording duration.•Record/Pause: During recording, press to pause, and press again to resume.• Stop and save: During recording, press the left function key to stop recording. The audio file is saved in My Files\Music automatically.• Play: After recording is complete, select Option > Play to play the audio file instantly.
World Time 33Organiser & Tools8Alternatively, you can select Options for the follow-ing operations: send by Message, Email or Blue-tooth, set as ringtone and delete. World TimeYou can view the time of important cities around the world. To switch among the time zones, press the left/right scroll key.If the daylight saving time (DST) is used in your city, you need to set the phone to DST. Then, you can get the right local time. To set the phone to DST, switch to the desired time zone and then select Options > DST. StopwatchYou can use the stop watch function. On the Stopwatch screen, you can perform the following operations: start, save, pause, continue, reset. TimerYou can set a timer for up to 99 hours and 59 min-utes. After you have set it, the timer is displayed on the home screen. Service dial numberWith this number you can get in touch with your ser-vice provider.
349My FilesMy Files enables you to manage the Pictures, Videos, Music, Ringtones, Games, Applications, Themes and Other files conveniently. You can access My Files by selecting My Files from the main menu.Select Pictures, Music, Ringtones or Videos folder. You can perform the following operations on files.•View: To view the picture file.•Play: To play a selected file.•Send: To send the selected file by MMS, Email or Bluetooth.• Set as: To set the picture as the wallpaper or the image of a contact.• Set as ringtone: To set a file as ring tone, specific contact tone, message tone or email tone.•Cut: To c u t the selected file.• Copy: To copy the selected file.•Edit: To edit a picture file.• Rename: To rename the selected file.•Sort: To sort the selected file by name or by date.•Delete: To delete the selected files. • Mark/Unmark: To select one or more files or cancel the selection.•Info.: To view the properties of one or more files. Note Some audio files are protected by Digital Rights Management (DRM), and may not be able to be used as a ringtone.Select Games, Applications, Themes, Other folder.•Games: To play games and download more games. The downloaded files are saved in this folder. For more details, Please refer to "Entertainment/games" on page 37.• Applications: Any applications that you download are saved in this folder.• Themes: All themes that you download are saved in this folder.•Other: You can save any kind of files. You can also create new folders in this folder to categorise your files.• Memory status: To view the memory status of your phone.When the phone detects and recognises the memory card, Memory card is displayed as a tab on the top of the My Files screen.
3510BrowserThe built-in browser makes it easy and pleasant to tour around the Internet. You can access the Browser screen by selecting Browser from the main menu. Open homepageBrowsing Pre-set Web PagesOn the homepage, select a link from the page. Then select to browse the page. When browsing, you can press the scroll keys to select a link you want to access. The selected link is highlighted. Press to access the link.Other Operations for the HomepageAfter selecting Options from the homepage, you can perform the following operations:•This link: To access the selected link in the current page.•Bookmarks: To access the bookmark directory and view the saved bookmarks.•Save as bookmark: To save the current page as a bookmark.•Open new page: To enter a website address and access it.•History: To access the visited webpage.•Navigate: To go forward or go backward when you browse web pages.• Object lists: To access the object lists.•Advanced: To access the advanced options.• Exit browser: To exit the current web page. Open new pageAccess the Open new page screen, and then you can enter the address of the page to be accessed. BookmarksWith this option, you can save and edit the informa-tion of the websites that you often access. Saved pagesWith this option, you can save the pages in your phone. Web pages are saved to the Saved pages.
History36 HistoryWith this option, you can access the visited webpage. ResumeTo link to the latest visited webpage. SettingsThese are preset for you to use the Internet service. If you need to modify them, open the Browser and select Settings.
3711EntertainmentYou can use the phone to play games, take photos, and listen to online music. GamesYou can play games and download more games.Downloaded games are saved to the My Files/Games directory.Available Options of GamesYou can scroll the cursor to a Java game and press or select Options > Select to launch the game.In the Games screen, you can select Options to per-form the following operations:•Select: To launch the game.• Update: To upgrade the game.• Security: To set the security requirements of the game.• Delete: To delete the game.• Properties: To view the property of the game.•Internet settings: To set the Internet settings.•Move: To move games saved in the phone to the memory card and vice versa. CameraIn the main menu, select Camera to start the camera. You can also press the camera key to start the cam-era.Operations in the Viewfinder ScreenIn the viewfinder screen, you can:Icon OperationPress the up/down scroll key to adjust the brightness.Press the volume keys to adjust the focus of the camera./When the camera is started, press the right scroll key to switch to the camera function (when the tool bar is closed).In the viewfinder screen, press the left function key to display the tool bar or press the right function key to close the tool bar. This tool bar is used to set the parameters of the camera.
Camera38Operations After Taking a PictureIn the viewfinder screen, you can press to take a picture. Pictures taken are auto saved to the My Files/Pictures directory.After taking a picture, you can select left function key for the following operations.•Send: To send the picture through MMS, email or Bluetooth.• Set as: To set the picture as the wallpaper or the image of a contact.• Delete: To delete the picture.•Edit: To edit the picture. Video CameraIn the camera viewfinder screen, press the right scroll key to switch to the video camera function. You can use your phone to record a video.◆ Operations in the Viewfinder ScreenIn the viewfinder screen, you can:Icon OperationPress the up/down scroll key to adjust the brightness. Press the volume keys to adjust the focus of the video camera./When the video camera is started, press the left scroll key to switch to the video camera function (when the tool bar is closed).In the viewfinder screen, press the left function key to display the tool bar or press the right function key to close the tool bar. This tool bar is used to set the parameters of the video camera.◆ Operations During RecordingIn the viewfinder screen, you can press to start recording the video.During the recording, you can perform the following operations.• Pause/Continue: To pause and then to start record-ing again.•Cancel: To cancel the recording.
3912ConnectionsYour phone provides you with many data communi-cation functions. You can access the Connectivity screen by selecting Settings from the main menu. BluetoothYou may use the built-in Bluetooth function of your phone to synchronise data between a PC and your phone, or use the built-in modem of your phone to access the Internet with a PC, or exchange data with other Bluetooth devices. You can also talk by using the Bluetooth headset or Bluetooth loudspeaker. Note The Bluetooth function supported by your Phone meets the requirements of Bluetooth Specification 1.2. It can work successfully only if you use it with compatible Bluetooth devices. For more information, refer to the user manuals of related devices, or consult the manufacturer of related devices.Bluetooth-Based SynchronisationYour phone can respond to data synchronisation requests from a computer.To operate the Bluetooth synchronisation with your phone, your PC needs to support Bluetooth function. 1Install the Huawei U1315 Mobile Phone PC Assistant supplied with your phone. 2Select Settings > Connectivity > Bluetooth > Switch On/Off > On to enable the Bluetooth function. 3Run the driver software for Bluetooth on the PC, and pair the phone. After the PC detects and recognises the phone serial port service, acti-vate the Bluetooth serial port service on the phone. 4Run the Huawei U1315 Mobile Phone PC Assis-tant on the PC. 5You can now operate the synchronisation. For details of the operation, refer to the Help of the Huawei U1315 Mobile Phone PC Assistant.Bluetooth-Based Data TransferYou can exchange data between your Bluetooth phone and other Bluetooth devices. If you want to
Bluetooth40exchange data between your phone and another device, that device must support Bluetooth and the Bluetooth function must be enabled. 1Select Switch On/Off > On from the Bluetooth settings list to enable the Bluetooth device. 2Select Devices from the Bluetooth settings list. Select Search to search a Bluetooth device. When a Bluetooth device is found for the first time, authentication is required.Now you can exchange data between your phone and the other Bluetooth device. Bluetooth-Based Internet AccessConnecting your phone to a PC through Bluetooth function enables the PC to use the phone as a modem. This helps to set up a dial-up connection to the Internet. (This is particularly useful for laptop.)You can create Bluetooth-based Internet access through the Huawei U1315 Mobile Phone PC Assis-tant supplied with your phone, or the built-in Internet wizard of the Windows operating system, or the Inter-net wizard supplied with the Bluetooth drive suite of the PC. Note Windows 2000 and Windows XP are sup-ported.◆ Accessing the Internet using the Huawei U1315 Mobile Phone PC AssistantTo access the Internet by Bluetooth using the Huawei U1315 Mobile Phone PC Assistant, make sure that your PC supports the Bluetooth function and your SIM card supports the Internet access service. 1Select Settings > Connectivity > Modem and set the port to Modem via Bluetooth. 2Select Settings > Connectivity > Bluetooth > Switch On/Off > On. 3Make sure that Bluetooth modem is in Device Manager/Modem of your PC. Run the driver program for Bluetooth on your PC, and then pair your phone. After the PC has detected the Huawei U1315 dial-up network service, you can activate this service.
USB41Connections12 4Install the Huawei U1315 Mobile Phone PC Assistant supplied with your phone. 5Run the Huawei U1315 Dial-up Internet on the PC to access the Internet.◆ Other Bluetooth OperationsYou can perform the basic settings for the Bluetooth functions.Select Settings > Connectivity > Bluetooth for the following operations.• Switch On/Off: To set the Bluetooth device to On or Off.• Search for devices: To search for new Bluetooth devices.• Devices: To view all detected Bluetooth devices.• Visibility: To set whether your phone can be found by other devices when the Bluetooth function is enabled.• Device name: To rename your phone.• My device information: To view the detailed infor-mation of your phone.• Blacklist: To save the un-trusted Bluetooth device. USBYou can synchronise data between your phone and PC, surf the Internet with your phone and read the memory card by USB cable.!警告!Warning • To use USB cable, please strictly obey the following rules. Otherwise, your phone or PC may be damaged. To connect your phone with a PC through USB cable, first connect the USB connector to your phone, and then connect the other end of the cable to the PC. To disconnect your phone from the PC, first disable the Huawei U1315 PC Assistant, then discon-nect the USB connector from the PC, and finally disconnect the USB cable from your phone.• If the PC cannot recognise your phone when connecting through the USB cable, power off and restart the PC and then retry.• Do not plug the USB cable in and out of your phone frequently.
USB42USB-Based SynchronisationYour phone supports the synchronisation requests from a PC to your phone.With a USB cable and Huawei U1315 Mobile Phone PC Assistant, your phone can communicate with a PC. You can back up the contact entries and mes-sages saved on your phone and the SIM card to a PC. You can also synchronise contacts, calender and tasks between your phone and Outlook. To operate the USB-based synchronisation with your phone, do as follows. 1Connect your phone to the PC by using the USB cable. 2Install the Huawei U1315 Mobile Phone PC Assistant supplied with your phone. 3Select Settings > Connectivity > Modem from the main menu of your phone and set the port to Modem via USB. 4Run the Huawei U1315 Mobile Phone PC Assis-tant on the PC. 5Now you can operate the USB-based synchroni-sation. For details of the operation, refer to the Help of the Huawei U1315 Mobile Phone PC Assistant.Accessing the Internet by USBConnecting your phone to the PC with the USB cable enables the PC to use the phone as a modem. This helps to set up a dial-up connection to the Internet.There are two methods to access the internet by using the USB cable: use the Huawei U1315 Mobile Phone PC Assistant supplied with your phone to load and run the Huawei Mobile Connect via the phone internet connectivity software, or use the Windows operating system to set the service. 1Select Settings > Connectivity > Modem and set the port to Modem via USB. 2Connect your phone to the PC by using the USB cable. 3Install Huawei U1315 Mobile Phone PC Assis-tant supplied with your phone.
USB43Connections12 4Ensure the USB device is shown in Device Man-ager/Port of your PC. 5Select one of the following methods to set up the dial-up connection. • Run the Huawei U1315 Dial-up Internet on the PC to create the dial-up connection.• Create Internet access through the built-in Internet wizard of the Windows operating sys-tem. Note Only Windows 2000 and Windows XP are supported.micro-SD Card ReaderYou can read the files saved in the micro-SD card by using a USB cable.To use the micro-SD card reader, do as follows. 1Insert the micro-SD card to your phone. 2Connect your phone to the PC by using the USB cable. 3Found New Hardware is displayed on your PC, and an icon for the mobile memory drive appears. Note The function of micro-SD card reader and the other functions using the USB cable areincompatible. If you enable the micro-SD card reader, other functions using the USBcable are unavailable. Using your phone with PC Assistant Note The PC assistant is preinstalled in your mobile phone. When connecting the phone with a PC, the PC assistant device will be automatically installed on the PC.If you experience any initial problems when synchro-nising your phone with the PC Assistant, please fol-low the steps below:◆ PC assistant installation 1Connect the data cable to your phone.
USB44 2Connect the other end of the data cable to your PC. 3Wait for the Dialog box to appear (this may take up to 30 seconds). Buttons showing Activate Huawei PC Assistant and Activate Dial up networking should be displayed.* 4Select Activate Huawei PC Assistant. 5Follow the prompts. 6When this has finished, wait for modem driver to appear in the modem list on your PC (this can be found by clicking on start, then control panel, then phone and modem options, then modems. Mobile Adapter - 3G Modem should appear). It may take up to 60 seconds for this to appear. 7You may be asked to restart the PC. Select Yes.◆ How to connect to the Internet via "Activate Dial Up Networking" 1Connect the data cable to your phone. 2Connect the other end of the data cable to your PC. 3Wait for the Dialog box to appear (this may take up to 30 seconds). Buttons showing Activate Huawei PC Assistant and Activate Dial up networking should be displayed.* 4Select Activate Dial up networking. 5Double click on the "Huawei" icon in the Dialup Internet window to connect to the internet. 6If the "Huawei" icon is not present, create a NEW connection by clicking on the top left icon ("Magic wand"). 7Select the communication device Mobile Adapter - 3G Modem and click Next. 8Select your country / region and sevice provider in drop down menu. Then click Next, Next again and Finish. Finally, double click on the newly added "Huawei connection" icon in the "Dialup Internet" window to connect to the internet. Note * If the dialog box does not appear in step 3, please disconnect the cable from the PC and then the phone. Then reconnect the
USB45Connections12cable to the phone and then the PC. The dialog box should appear after this activity. If the dialog box still does not appear, please disconnect and reconnect the cable as above using a different USB port on the PC. Once the dialog box appears, continue from step 4.
4613SettingsYou can access the Settings screen by selecting Set-tings from the main menu. Phone SettingsYou can change the settings of the phone, including Date and time, Profiles, Phone language, Input lan-guage, Keypad tone, Keypad lock period, Shortcuts, as well as Auto ON and OFF.Date and TimeTo set the system time and time format of the phone.ProfilesYou can select different profiles for the phone to suit different environmental situations.You can select a profile and select Options > Activate to activate this profile. You can also select Options > Edit to edit the settings for this profile. Note In the standby mode, you can press and hold to switch the current profile to the silent profile. If the current profile is offline, you cannot use this function.Phone Language Your phone supports several languages. Select Set-tings > Phone settings > Phone language to select a language. In addition to these languages, you can also select Auto. This option is used to set the phone language to be the same as that used in your SIM card.Input Language The option is used to set the language used to enter text. Keypad toneThis option is used to set the keypad tone of the phone.Keypad lock periodAfter enabling the auto keypad lock function, you can set the keypad lock period. If there is no operation on the phone within a preset period of time, the keypad is locked automatically. You can press and to unlock the keypad.
Display Settings 47Settings13ShortcutsThis option is used to assign the frequently used functions to the scroll keys as shortcut keys.Auto ON and OFFThis option is used to set your phone to power on or off automatically. 1In the Auto ON and Auto OFF screen, set the cycle for Auto ON and Auto OFF respectively. Then select Save. 2Set the time for Auto ON and Auto OFF, and then select OK to save your settings. Display SettingsYou can change the settings for the phone display, including Wallpaper, Themes, Brightness, Keypad backlight, Backlight time, Intermittently alert, Greeting message, Goodbye message.•Wallpaper: To set the wallpaper layout for the home screen.•Themes: To set the theme of the phone.•Brightness: To set the brightness of the screen.•Keypad backlight: To turn the keypad backlight on or off.•Backlight time: To set the backlight delay time for the screen.• Intermittently alert: To turn the alert on or off.•Greeting message: To enter a greeting message that appears on the screen when you power on your phone.• Goodbye message: To enter a message that appears on the screen when you power off your phone. Message SettingsYou can change the message settings including SMS & MMS, Email, Push messages, Broadcast, and Common phrases. Call SettingsYou can change the settings for making calls.
Call Settings48Call ForwardingThis option is used to forward incoming calls. 1In the main screen, select Settings > Call set-tings > Call forwarding. 2Select the forwarding condition from All calls, If unreachable, If busy, and If unanswered. 3Then select the forwarding type from Voice call, Fax call, Data and video call and All services. 4Select Options > Activate/Deactivate to enable or disable the service. You can also select Check status to check the status of call forward-ing service.Alternatively, you can select Disable all and then select one from the four items: Voice call, Fax call, Data and video call and All services. Then press to disable all call forwarding services of this type. Call BarringThis option is used to set the call barring mode for the phone.Select Call settings > Call barring for the following options:◆ Call Barring: 1Select the barring condition from All outgoing calls, Intl. calls, Intl. calls except home, All incoming calls, and Incoming calls when abroad. 2Then select the barring type from Voice call, Fax call, Data and video call, and All services. 3Select Options > Activate/Deactivate to enable or disable the service. You can also select Check status to check the status of call barring service.◆ Disable AllSelect one type from Voice call, Fax call, Data and video call and All services, and then enter the call barring password. Press to cancel all call barring services of each type.◆ Call barring passwordThis function is used to change the password for call barring. Select Call barring password from the Call
Call Settings 49Settings13barring screen. Then you can change the call barring password. Note The old call barring password is provided by your network operator if it is the first time for you to change the password.Call WaitingThis option is used to enable or disable the call wait-ing function. You can also view whether the call wait-ing function is enabled by checking the status.The call waiting function is network-dependent. For more information, contact your service provider.Save unknown numberThis function is used to prompt whether to save the number after a call ends. You can enable or disable this function.Auto RedialThis function is used to auto redial the dialed number if the dialing failed.Answer ModeIt is used to set the mode for answering an incoming call. Two options are available: Any key and Send key.Auto AnswerThis option is used to select auto answering for incoming calls. Select Call settings > Auto answer for the following options.• Immediate answer: To answer an incoming call immediately.• Text Message: To auto send a text message that is preset and chosen from the Common phrases to the current caller.• Recorded voice: To answer an incoming call by auto playing a recorded message.• Disable: To disable the auto answer function.Calling IDThis options allows you to select whether to display your phone number on the phone of the party who called you.
Video Call50If select Auto, whether your phone number will be shown on the called phone depends on the network.Select LineThis option is used to set the call line for your phone. Two options are available: Line 1 and Line 2.My NumberThis function can be used to save your own phone numbers on the SIM card. You can select Options to edit or delete the records. Video Call You can change the settings for the Video Call func-tion, including Picture mode, Image quality, Camera off, Audio off, Auto voice call, Send image and Auto answer.•Picture mode: To switch between image windows during a video call. •Image quality: To set the image quality for video. •Camera off: To open or close the video channel during a video call.•Audio off: To open or close the audio channel dur-ing a video call.•Auto voice call: To enable the auto voice call function. The phone auto makes a voice call, when the other party's phone does not support the video call service.•Send image: To select a file and send it to the other party when you hold a video call.•Auto answer: To auto answer an incoming video call. You can enable or disable this function. Contacts SettingsThis option is used to set the default contact list displayed in the contact screen or sort the contacts in the contact screen. Java SettingsThis option is used to set the volume and vibration of games.
Connectivity51Settings13 ConnectivityThe data connection function provides several data communication functions. You can synchronise data between your phone and a PC through a USB cable or Bluetooth. Your PC can use the built-in modem of your phone to access the Internet. For detailed infor-mation, refer to "Connections" on page 39. Network You can change the settings for the network.Select Settings > Network for the following options: Mode, Select network, Cell information, and Operator list. Security You can change the settings related to the phone security.Orig. Phone SettingsThis option is used to reset your phone to the factory settings.Password LockThis option is used to enable or disable the "Phone lock" and "PIN lock". 1Select Phone lock/PIN lock. 2Press the up/down scroll key to select On or Off. 3Set passward:•Phone password: Enter the phone password.•PIN password: If the desired status is the same as the current status, just press . Con-versely, you need to select the desired status and then enter the PIN code.Change PasswordYou can modify the phone password and PIN code. 1Select Security > Change password. 2Select one item from Phone password, PIN code, and PIN2 code. 3Enter the old password (The initial phone pass-word of the phone is 0000).
DRM Setting52 4Enter a new password. 5Enter the new password again to confirm. Note • To modify the PIN code, you must set the "PIN locked" to "On" first.• If you enter the wrong PIN or PIN2 three times, the SIM card is locked. You need the PUK or PUK2 code to unlock the SIM card. If you enter the wrong PUK or PUK2 code 10 times in total, the SIM card is locked permanently.• PUK or PUK2 code are delivered with the SIM card. If you have not received one or have forgotten it, contact your service pro-vider.Fixed Dialer NumberIf your SIM card supports the Fixed Dialer Number (FDN) function, you can select Security > Fixed dialer number to set the limit for phone numbers. DRM SettingDigital Rights Management (DRM) can protect the digital content from piracy and protect the provider’s interests. The digital content includes Java applica-tions and multimedia content such as images, audio and video. If the protected content cannot be accessed, it indicates that the corresponding copy-right is overdue or used up. Select Settings > DRM setting. Enter the correct phone password and press to confirm, and you can delete all the rights.
6115Acronyms and AbbreviationsDCF DRM Content FormatDRM Digital Rights ManagementFDN Fixed Dial NumberGPRS General Packet Radio ServiceGSM Global System for Mobile communica-tionOTA Over-The-AirPIN Personal Identification NumberPLMN Public Land Mobile NetworkPUK PIN Unblocking KeySD Secure Digital CardSAR Specific Absorption RateSTK SIM Tool KitURL Universal Resource LocatorUSB Universal Serial BusWAP Wireless Application ProtocolWCDMA Wideband Code Division Multiple Access
5114Warnings and Precautions Electronic Device• Turn off your phone near high-precision electronic devices. The phone may affect the performance of these devices.• Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an elec-tronic medical device, consult the device manufac-turer to confirm whether the radio wave affects the operation of this device.• Pacemaker manufacturers recommend that a mini-mum separation of 15cm be maintained between a mobile phone and a pace-maker to avoid potential interference with the pace-maker. To achieve this use the phone on the opposite ear to your pace-maker and do not carry it in a breast pocket. HospitalPay attention to the following points in hospitals or health care facilities:• Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU).• Do not use your phone at places for medical treat-ment where phone use is prohibited.• When using your phone near someone who is suf-fering from a heart disease, turn down the ring tone volume or vibration properly so that it does not affect the person. Area with Inflammables and ExplosivesIn any area with inflammables and explosives, turn off your phone and do not take out, install or charge the battery, to avoid explosion and fire. Areas with inflammables and explosives include, but are not lim-ited to:• Gas station• Area for storing fuels (such as the bunk under the deck of a ship)• Device/Vehicle for transporting and storing fuels or chemical products
Storage Environment52• Area with chemical substances and particles (such as: granule, dust, metal powder) in the air• Area with the sign of "Explosives"• Area with the sign of "Turn off bi-direction wireless equipment"• Area where it is generally suggested to stop the engine or a vehicle Storage Environment• Do not place magnetic storage media such as mag-netic cards and floppy disks near the phone. Radia-tion from the phone may erase the information stored on them.• Do not put your phone, battery, or other accesso-ries in containers with strong magnetic field, such as an induction cooker and a microwave oven. Oth-erwise, circuit failure, fire, or explosion may occur.• Do not leave your phone, battery, or charger in a very hot or cold place. Otherwise, malfunction of the products, fire, or explosion may occur.• Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you are using the phone.• Do not subject your phone, battery, and charger to serious collision or shock. Otherwise, battery leak-age, phone malfunction, overheat, fire, or explosion may occur.• Do not put your phone in the back pocket of your trousers or skirt, to avoid phone damage while seated. Children Safety• Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guid-ance.• Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous.• Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings.
Operating Environment 5314Warnings and Precautions Operating Environment• The phone, battery, and charger are not water-resistant. Keep them dry. Protect the phone, battery and charge from water or vapor. Do not touch the phone with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur.• Do not use the phone in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur.• Do not turn on or off the phone when it is near your ears to avoid negative impact on your health.• When carrying or using the phone, keep the antenna at least one inch (2.5 centimeters) away from your body, to avoid negative impact on your health caused by radio frequency leakage.• If you feel uncomfortable (such as falling sick or qualm) after playing games on your phone for a long time, please go to see a doctor immediately.• On a thunder stormy day, do not use your phone outdoors or when it is being charged.• Do not touch the antenna when a call is going on. Touching the antenna may affect call quality and cause the phone to operate with more power. As a result, the talk time and standby time are short-ened.• The phone may interfere with nearby TV sets, radios and PCs.• In accordance with international standards for radio frequency and radiation, use phone accessories approved by the manufacturer only. Cleaning and Maintenance• Before you clean or maintain the phone, turn off the phone and disconnect it from the charger. Other-wise, electric shock or short-circuit of the battery or charger may occur.• Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and ben-zene) to clean the phone and the charge. Other-wise, part damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet.
Environmental Protection54• Keep the plug dry when you clean it, to prevent fire.• If the phone or any of its fittings does not work, turn to the local authorized service center for help. Environmental Protection• Please observe the local regulations regarding the disposal of your packaging materials, exhausted battery and old phone and please promote their recycling. Do not dispose of exhausted battery or old phone in municipal waste.• This HUAWEI device complies with Directive 2002/95/EC on the restriction of the use of certain haz-ardous substances in electrical and electronic equipment.: This symbol indicates that the equipment car-rying this mark must NOT be thrown into general waste but should be collected separately and prop-erly recycled under local regulations. Emergency CallsYou can use your phone for emergency calls. How-ever, connections in all conditions cannot be guaran-teed. You should never rely solely on the phone for essential communications. Battery• Use the battery approved by the manufacturer only. Otherwise, explosion may occur.• Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode.• Do not connect two poles of the battery with con-ductors such as cables, jewelries or any other metal material. Otherwise, the battery is short-circuited and it may burn your body.• Do not disassemble the battery or solder the bat-tery poles. Otherwise fluid leakage, overheat, fire, or explosion may occur.• If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open
Charger5514Warnings and Precautionsflame to avoid fire or explosion. Then turn to an authorized maintenance engineer for help.• The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours.• If the battery fluid contacts your skin or cloth, wash with clean water immediately to avoid irritation to the skin.• If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your eyes can be hurt. Wash with clean water and go to see a doctor immediately.• If there is battery deformation, color change or abnormal heating while you charge or store the bat-tery, take it out immediately and stop using it. Oth-erwise, battery leakage, overheat, explosion, or fire may occur.• When installing the battery, do not push the battery by force lest battery fluid leak out or the battery crack.• Do not take out the battery when the phone is turned on.• If you do not use the battery for a long time, store it in normal temperature after charging. Charger• Use the charger approved by the phone manufac-turer only. Any violation of this rule may result in fire or malfunction of the charger.• Do not short-circuit the charger. Short-circuiting the charger may cause fire or malfunction of the char-ger.• If the power cord is damaged (for example, the lead is exposed or broken), or the plug becomes loose, stop using the power cord at once. Otherwise, elec-tric shock, short-circuit of the charger, or fire may occur.• Keep the charger dry. Once water or other liquid leaks into the charger, electrical leakage or other faults may occur.• Do not use the charger in a dusty and damp envi-ronment.• Keep the power cord away from any heating appli-ance.
Using the USB Cable56• Ensure the charger is properly plugged into the power socket properly when charging the battery. Improper insertion may result in electric shock, fire, or explosion. To unplug the charger, pull the plug off rather than tear off the power cord.• Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur.• When you are charging the battery with the char-ger, do not touch the plug, power cord or the char-ger with a wet hand. Otherwise, electric shock can be caused.• Once the liquid such as water leaks into the char-ger, remove the plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur. Using the USB CableTo use the USB cable, please strictly obey the follow-ing rules. Otherwise, your phone or PC may be dam-aged:• To connect your phone and PC with the USB cable, connect to the phone at first, and then connect to the PC.• In the process of communication between your phone and PC, it is strictly forbidden to plug or pull out the USB cable.• To disconnect your phone and PC from the USB cable, disconnect from the PC at first, and then dis-connect from the phone. Certification Information (SAR)THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD.Your mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields).Governments around the world have adopted com-prehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection)
Certification Information (SAR) 5714Warnings and Precautionsand IEEE (Institute of Electrical and Electronics Engi-neers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish per-mitted levels of radio wave exposure for the public. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in mea-surements.Specific Absorption Rate (SAR) is the unit of mea-surement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the mobile phone while operating can be well below the value. This is because the mobile phone is designed to use the minimum power required to reach the network.All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested according to the technical standard-EN 50361 and does not exceed the limit established by the European Council Recommendation: 1999/519/EC for safe exposure. The tests are performed in using positions (that is, at the ear) as required by the EN50361 for each model.The SAR limit adopted by the 1999/519/EC is 2.0 watts/kilogram (W/kg) averaged over ten gram of tis-sue. The highest SAR value for this device type when tested at the ear is 0.210 W/kg, and when properly worn on the body is 0.685 W/kg.All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (that is, at the ear and worn on the body) as required by the FCC for each model. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body with an accessory that contains no
Certification Information (SAR)58metal part. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tis-sue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 0.857 W/kg, and when properly worn on the body is 1.16 W/kg.This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. EU Declaration of ConformityAccording to the Radio Equipment and Telecommuni-cations Terminal Equipment Directive 1999/5/ECFor the following equipment Product: WCDMA/GPRS/GSM Mobile PhoneType Designation/Trademark: HUAWEI/U1315Manufacturer's Name: Huawei Technologies Co.,Ltd.Manufacturer's Address: Bantian, Longgang District, Shenzhen, 518129, Guangdong, P. R. China.is herewith confirmed to comply with the require-ments set out in the Council Directive1999/5/EC for radio equipment and telecommunications terminal equipment. For the evaluation of the compliance with this Directive, the following standards were applied:Safety: EN 60950-1:2001 First Edition;Health: EN 50360:2001; EN 50361:2001;EMC: EN 301 489-1 V1.4.1; EN 301 489-24 V1.2.1; EN 301489-7 1.2.1; EN 301489-17 1.2.1;Radio: EN 301 511 V9.0.2; EN 301 908-1 V2.2.1; EN 301 908-2 V2.2.1; EN 300 328 V1.4.1;Responsible for making this declaration is the: Manu-facturer.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio fre-
Certification Information (SAR) 5914Warnings and Precautionsquency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow-ing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications made to this equipment not expressly approved by HUAWEI may void the FCC authorization to operate this equipment.
6216AppendixThe phone supports image files, video files and audio files of many formats. For details, see the following table.File type FormatsImage JPG, PNG, BMP, GIF, BCI, WBMP, SVG, and SVGZ. Audio MP3, AAC/AAC+, AMR, MID, WAV(ADPCM), MMF, QCP, and XMF/DLS.Video 3GP, MP4, 3G2, and PMD. Note In some cases, the preceding media for-mats may not be supported.
1"123" Numeric Input Method .................................. 16Access Codes .......................................................... 9Accessing the Internet by USB .............................. 42Adding/Deleting Group Members........................... 18Alarm Prompt ......................................................... 28Alarms.................................................................... 28Answer Mode ......................................................... 49Answering or Rejecting Calls ................................. 11Area with Inflammables and Explosives ................ 53Available Options of Games .................................. 37Auto Answer........................................................... 49Auto ON and OFF .................................................. 47Auto Redial ............................................................ 49Back View ................................................................ 3Battery.................................................................... 56Bluetooth................................................................ 39Bluetooth-Based Data Transfer ............................. 39Bluetooth-Based Internet Access........................... 40Bluetooth-Based Synchronisation.......................... 39Bookmarks ............................................................. 35Broadcast Inbox ..................................................... 25Browsing Pre-set Web Pages ................................ 35Calculator ............................................................... 31Calendar Functions................................................ 29Calendar ................................................................ 28Call Barring ............................................................ 48Call Forwarding ...................................................... 48Call Settings........................................................... 47Call Waiting............................................................ 49Calling ID ............................................................... 49Calls....................................................................... 14Camera .................................................................. 37Certification Information (SAR).............................. 58Change Password ................................................. 51Charger.................................................................. 57Charging the Battery................................................ 7Charging with a Cable Charger ............................... 8Children Safety ...................................................... 54Cleaning and Maintenance.................................... 55Connectivity ........................................................... 51Contacts Settings .................................................. 50Creating a Message .............................................. 20Creating an Email .................................................. 22Currency converter ................................................ 32Date and Time ....................................................... 46Display Settings..................................................... 47DRM Setting .......................................................... 52Electronic Device................................................... 53Email Settings........................................................ 24Email...................................................................... 22Emergency Calls ................................................... 56Environmental Protection ...................................... 56Fixed Dialer Number.............................................. 52Function Options During Playing ........................... 26Games ................................................................... 37Groups ................................................................... 18History ................................................................... 36Home Screen........................................................... 3Index
2Hospital .................................................................. 53Java Settings ......................................................... 50Icon Description ..................................................... 12Icon Description ..................................................... 13Input Different Languages...................................... 16Input Language ..................................................... 46Introduction to the Menu .......................................... 5Keypad lock period ................................................ 46Keypad tone........................................................... 46Loading the SIM Card .............................................. 6Loading/Removing a Memory Card ......................... 8Mailboxes............................................................... 23Making a Video Call ............................................... 11Making a Voice Call ............................................... 11Making Calls from the Contacts ............................. 17Making or Answering Calls .................................... 11Making Voice Calls Using SDN.............................. 11Managing a Group ................................................. 19Memo ..................................................................... 30Message Settings .................................................. 22Message Settings .................................................. 47Messages Mailboxes ............................................. 20Messages............................................................... 20micro-SD Card Reader .......................................... 43Music Library.......................................................... 26My Number ............................................................ 50Network ................................................................. 51New Schedule........................................................ 28New Tasks ............................................................. 30Open homepage.................................................... 35Open new page ..................................................... 35Operating Environment.......................................... 55Operations After Taking a Picture ......................... 38Operations During a Video Call ............................ 13Operations During a Voice Call ............................. 12Operations in the Viewfinder Screen ..................... 37Operations ............................................................. 12Operations ............................................................. 13Orig. Phone Settings ............................................. 51Other Operations for the Homepage ..................... 35Other Operations ................................................... 17Packing List ............................................................. 1Password Lock ...................................................... 51Phone Language .................................................. 46Phone Settings ...................................................... 46Playlists ................................................................. 27Powering Off............................................................ 9Powering On............................................................ 9Powering On/Off ...................................................... 9Profiles................................................................... 46Resume ................................................................. 36Save unknown number.......................................... 49Saved pages.......................................................... 35Schedule Prompt ................................................... 29Screen Operations During Playing ........................ 26Searching for a Contact......................................... 17Security ................................................................. 51Select Line............................................................. 50
3Service dial number ............................................... 33Setting Alarm Clocks.............................................. 28Settings .................................................................. 36Shortcuts................................................................ 47Side View ................................................................ 3Stopping the Alarm Clock ...................................... 28Stopwatch .............................................................. 33Storage Environment ............................................. 54Symbol Input Method ............................................. 16Synchronise ........................................................... 30T9® Input Method.................................................. 15Task Prompt........................................................... 30Task ....................................................................... 29Tasks Functions ................................................... 30Templates .............................................................. 25Timer...................................................................... 33Traditional Input Method ....................................... 15Video Call .............................................................. 50Video Camera........................................................ 38Viewing Contacts in Phone/SIM............................. 17Unit converter......................................................... 31Unloading the SIM Card........................................... 7Voice recorder........................................................ 32World Time............................................................. 33USB........................................................................ 41USB-Based Synchronisation.................................. 42Using the USB Cable ............................................. 58Using your phone with PC Assistant...................... 43Your Phone .............................................................. 2

Navigation menu