Huawei Technologies WAS-LX1A Smart Phone User Manual WAS cover

Huawei Technologies Co.,Ltd Smart Phone WAS cover

Contents

UserManual

Quick Start Guide
1
For more information
Go to http://consumer.huawei.com/en/ to download the
user guide for your device and read the FAQ, privacy
policy, and other information.
Go to
Settings
>
About phone
>
Legal information
to
read the legal information.
Please visit
http://consumer.huawei.com/en/support/hotline/ for the
most up-to-date contact information for your country or
region.
2
Your phone at a glance
Before you start, let's take a look at your new phone.
•
To turn on your phone, press and hold the power
button until your phone vibrates and the screen turns
on.
•
To turn off your phone, press and hold the power
button, and then touch .
To forcibly restart your phone, press and hold the
power button until your phone vibrates.
Front camera
Light sensor
Microphone Micro USB port Speaker
Power button
Volume button
Earpiece
Status indicator
Fingerprint
scanner
Headset jack
Flash
Camera
3
Getting started
Follow the instructions in the following figures to set up
your phone.
• Do not insert or remove a SIM card while your
phone is on.
• Ensure that the SIM card is in the correct position
and keep the card tray level when inserting it into
your phone.
Please exercise caution when using the SIM ejector
pin to avoid hurting your fingers or damaging your
phone. Store your pin in a safe place out of the reach
of children to prevent them from swallowing it or
injuring themselves by accident.
Caution
Insert the SIM card into the correct card slot to
ensure that it can be recognized by the phone.
The upper card slot may not support nano-SIM cards.
You can insert only a microSD card into it.
NJDSP4%
Or
4
Safety Information
Please read all of the safety information carefully before
using your device to ensure its safe and proper operation
and to learn how to dispose of your device properly.
Viewing the safety and regulatory
information
For more information on safety, touch
Settings
>
About
phone
>
Legal information
>
Safety information
.
For more information on regulation, touch
Settings
>
About phone
>
Authentication info
.
For more information on certification logos, touch
Settings > About phone > Certification logos.
Operation and safety
•
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
•
Using an unapproved or incompatible power
adapter, charger, or battery may damage your
device, shorten its lifespan, or cause a fire, explosion,
or other hazards.
•
Ideal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are -20 °C to +45 °C.
•
Pacemaker manufacturers recommend that a
minimum distance of 15 cm be maintained between
a device and a pacemaker to prevent potential
5
interference with the pacemaker. If using a
pacemaker, hold the device on the side opposite the
pacemaker and do not carry the device in your front
pocket.
•
Keep the device and the battery away from excessive
heat and direct sunlight. Do not place them on or in
heating devices, such as microwave ovens, stoves, or
radiators.
•
Observe local laws and regulations while using the
device. To reduce the risk of accidents, do not use
your wireless device while driving.
•
While flying in an aircraft or immediately before
boarding, only use your device according to
instructions provided. Use of a wireless device in an
aircraft may disrupt wireless networks, present a
hazard to aircraft operation, or be illegal.
•
To prevent damage to your device's parts or internal
circuits, do not use it in dusty, smoky, damp, or dirty
environments or near magnetic fields.
•
When charging the device, make sure the power
adapter is plugged into a socket near the devices and
is easily accessible.
•
Unplug the charger from electrical outlets and the
device when not in use.
•
Do not use, store or transport the device where
flammables or explosives are stored (in a gas station,
oil depot, or chemical plant, for example). Using your
device in these environments increases the risk of
explosion or fire.
6
•
Dispose of this device, the battery, and accessories
according to local regulations. They should not be
disposed of in normal household waste. Improper
battery use may lead to fire, explosion, or other
hazards.
•
Use only the following listed AC Adapters/Power
Supplies: HUAWEI: HW-059200EHQ, HW-
059200AHQ, HW-059200BHQ, HW-059200UHQ.
Disposal and recycling information
This symbol (with or without a solid bar) on
the device, batteries (if included), and/or the packaging,
indicates that the device and its electrical accessories (for
example, a headset, adapter, or cable) and batteries
should not be disposed of as household garbage. These
items should not be disposed of as unsorted municipal
waste and should be taken to a certified collection point
for recycling or proper disposal.
For more detailed information about device or battery
recycling, contact your local city office, household waste
disposal service, or retail store.
Disposal of the device and batteries (if included) is subject
to WEEE Directive Recast (Directive 2012/19/EU) and
Battery Directive (Directive 2006/66/EC). The purpose of
separating WEEE and batteries from other waste is to
minimize the potential environmental impacts and
human health risk of any hazardous substances that may
be present.
7
Reduction of hazardous substances
This device is compliant with the REACH Regulation
[Regulation (EC) No 1907/2006] and RoHS Directive
Recast (Directive 2011/65/EU). Batteries (if included) are
compliant with the Battery Directive (Directive 2006/66/
EC). For up-to-date information about REACH and RoHS
compliance, please visit the web site
http://consumer.huawei.com/certification.
EU regulatory conformance
Body worn operation
The device complies with RF specifications when used
near your ear or at a distance of 0.5 cm from your body.
Ensure that the device accessories, such as a device case
and device holster, are not composed of metal
components. Keep the device away from your body to
meet the distance requirement.
WAS-LX1A
: The highest SAR value reported for this
device type when tested at the ear is 0.89 W/kg, and
when properly worn on the body is 0.91 W/kg.
Statement
Hereby, Huawei Technologies Co., Ltd. declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC and
2009/125/EC.
The most recent, effective version of the DoC
(declaration of conformity) can be viewed at
http://consumer.huawei.com/certification.
The following marking is included in the product:
8
WAS-LX1A
:
This device may be operated in all member states of the
EU.
Observe national and local regulations where the device
is used.
This device may be restricted for use, depending on the
local network.
Restrictions in the 2.4 GHz band:
Norway
: This subsection does not apply for the
geographical area within a radius of 20 km from the
centre of Ny-Ålesund.
Restrictions in the 5 GHz band:
WLAN function of this device isrestricted only to indoor
use when operating in the 5150to 5350 MHz frequency
range.
ErP Product Information
Hereby, Huawei Technologies Co., Ltd. declares that
the product meets the directive 2009/125/EC and
its implementation regulation (EC) NO 1275/2008
amended by (EC) 278/2009,(EC) 642/
9
2009,(EU) 617/2013,(EU) 801/2013,and its
implementation regulation (EC) NO 278/2009.
The power consumption of product in networked
standby if all wired network ports are connected and all
wireless network ports are activated is 1.163 W.
For the product information displayed on the
manufacturers' freely accessible websites required by
(EU) No 801/2013, please visit
http://consumer.huawei.com/certification.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used
near your ear or at a distance of 1.5 cm from your body.
Ensure that the device accessories, such as a device case
and device holster, are not composed of metal
components. Keep the device away from your body to
meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged
over one gram of tissue. The highest SAR value reported
to the FCC for this device type complies with this limit.
WAS-LX1A
: The highest SAR value reported to the FCC
for this device type when using at the ear is 1.03 W/kg,
and when properly worn on the body is 0.69 W/kg, and
when using the Wi-Fi hotspot function is 0.74 W/Kg.
10
FCC statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Caution:
Any changes or modifications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
11
compliance could void the user's authority to operate the
equipment.
Legal Notice
Trademarks and Permissions
and are trademarks or
registered trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trademark of ETSI.
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth SIG, Inc.
and any use of
such marks by Huawei Technologies Co., Ltd. is under
license.
Wi-Fi
®
, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
trademarks of Wi-Fi Alliance.
Privacy Policy
To better understand how we protect your personal
information, please see the privacy policy at
http://consumer.huawei.com/privacy-policy.
12
Copyright © Huawei Technologies Co., Ltd.
2017. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY,
AND DOES NOT CONSTITUTE ANY KIND OF
WARRANTIES.
All pictures and illustrations in this guide, including
but not limited to the phone color, size, and display
content, are for your reference only. The actual
product may vary. Nothing in this guide constitutes a
warranty of any kind, express or implied.
底边留5mm
Note: Remember the Google account your phone
last logged in to.
During an untrusted factory settings restoration or
microSD card–based update, Google's anti-theft
mechanism requires you to enter the Google account
your phone last logged in to on the startup
navigation screen for identity authentication. Your
phone can properly power on only after the identity
authentication passes.
Model: WAS-LX1A
Please visit
http://consumer.huawei.com/en/support/hotline for
recent updated hotline and email address in your
country or region.
The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.

Navigation menu