Huawei Technologies Y220-U17 WCDMA Digital Mobile Phone User Manual QSG Cover

Download:
Mirror Download [FCC.gov]
Document ID	2068351
Application ID	Aswgino6HfJP+lgyi2YdRQ==
Document Description	HUAWEI Y220-U17 User Manual 2013.9.11
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.56kB (1119555 bits)
Date Submitted	2013-09-11 00:00:00
Date Available	2013-09-11 00:00:00
Creation Date	2013-08-28 14:30:44
Producing Software	Adobe PDF library 9.90
Document Lastmod	2013-09-11 14:46:48
Document Title	QSG Cover
Document Creator	Adobe Illustrator CS5.1

Y220
Quick Start Guide
Dual-Card Dual-Standby
Your mobile phone supports dual-card dual-standby mode,
which can significantly reduce power consumption and
increase your phone's standby time. Note that two restrictions
exist:


When you make calls using one SIM card, the other SIM
card is disabled.
For example, when you make calls using SIM card
1, SIM card 2 cannot be used to answer calls or
access the Internet. If someone calls SIM card 2,
the caller will hear a voice message like "The
subscriber you dialed is out of the service zone" or
"The subscriber you dialed is not able to answer
your call, please try again later." This is because
your mobile phone cannot access the network
with both SIM cards at the same time and has
nothing to do with your service provider's network
condition. It is recommended that you subscribe to
services such as voicemail or missed-call reminders
from your service provider to avoid the
inconvenience caused by missed calls.
When you are using one SIM card's data services, you can
receive calls and messages using the other SIM card, but
data services will be interrupted.
For example, when SIM card 1's data services are
in use, you can use SIM card 2 for calling and
messaging, but SIM card 1's data services will be
interrupted as a result. When the call using SIM
card 2 is terminated, or the message is received or
sent, you can resume using SIM card 1's data
services.
Getting to know your phone
Thank you for choosing the HUAWEI smartphone.
First, let's take a look at a few basics:
Press and hold the power button to power on your phone.
After your phone is powered up, you can use the power button
to turn the screen off and on.
Preparing your phone
To insert a SIM card, the battery and a microSD card please
perform the steps shown in the following figures.
Your phone is shipped with the battery partially charged. It is
recommended that you fully charge the battery before using it
for the first time.
Dual-Card Management
Your mobile phone supports access to both WCDMA and GSM
networks. Follow the onscreen instructions or the quick start
guide to install SIM cards.
On the home screen, touch
and then the SIM
management tab.
Choose Card 1/Card 2 to activate the SIM cards.
Locking and unlocking the
screen
When you are not using your phone, press the power button
to turn off the screen.
After being idle for a specified period of time, your phone
automatically locks its screen.
Follow the onscreen instructions and drag
screen or open an application.
to unlock the
Making a call
Touch
to open the dialer.
You can dial a phone number directly or touch
to enter
the contact and choose a contact.
You can also touch a phone number in places like messages,
email and WebPages to make a call.
To answer an incoming call in the lock screen interface, drag
to
Sending messages
Touch
to open Messaging.
Adding a photo or audio clip to a text message turns it into a
multimedia message.
You can also save attachments from multimedia messages.
Taking a photo or video
Touch
to open Camera.
In photo mode, touch an object on the view finder to manually
focus it. Touch
to take a photo.
In video mode, frame the scene and touch
video.
to record a
Listening to music
Touch
to open Music.
You can copy songs to your phone and immerse yourself with
extraordinary audio experience anytime.
You can play songs by name, artist, album and more.
Clearing the Memory Space
When receiving a memory warning popped up by the system,
be sure to promptly clean up the memory to keep your mobile
phone normal. If you ignore the prompt to continue using, the
system will stay in the memory clean interface and some key
functions will be locked until the memory space cleared to a
safe range. Permanent irreversible damage of the phone will be
caused if you insist on the operation.
For More Help
Search for and download the User Guide from visit
http://consumer.huawei.com/en/.
Please visit http://consumer.huawei.com/en/ for recently
updated hotline and email address in your country or region.
10
Personal Information and Data
Security
The use of some functions or third-party applications on your
device could result in your personal information and data being
lost or becoming accessible to others. Several measures are
recommended to help you protect personal and confidential
information.








Place your device in a safe area to prevent it from
unauthorized use.
Set your device screen to lock and create a password or
unlock pattern to open it.
Periodically back up personal information kept on your
SIM/UIM card, memory card, or stored in your device
memory. If you change to a different device, be sure to
move or delete any personal information on your old
device.
If you are worried about viruses when you receive messages
or emails from a stranger, you can delete them without
opening them.
If you use your device to browse the Internet, avoid
websites that might pose a security risk to avoid theft of
your personal information.
If you use services such as Wi-Fi tether or Bluetooth, set
passwords for these services to prevent unauthorized
access. When these services are not in use, turn them off.
Install or upgrade device security software and regularly
scan for viruses.
Be sure to obtain third-party applications from a legitimate
source. Downloaded third-party applications should be
scanned for viruses.
11




Install security software or patches released by Huawei or
third-party application providers.
Some applications require and transmit location
information. As a result, a third-party may be able to share
your location information.
Your device may provide detection and diagnostic
information to third-party application providers. Third party
vendors use this information to improve their products and
services.
If you have concerns about the security of your personal
information and data, please contact mobile@huawei.com.
12
Legal Notice
Copyright © Huawei Technologies Co., Ltd.
2013. All rights reserved.
Trademarks and Permissions
, and
are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Huawei Technologies Co., Ltd. is under license.
Other trademarks, product, service and company names
mentioned may be the property of their respective owners.
Privacy Policy
To better understand how we protect your personal
information, please see the privacy policy at
http://consumer.huawei.com/en/privacy-policy/index.htm.
13
Safety information
This section contains important information about the
operation of your device. It also contains information about
how to use the device safely. Read this information carefully
before using your device.
Electronic device
Do not use your device if using the device is prohibited. Do not
use the device if doing so causes danger or interference with
other electronic devices.
Interference with medical equipment



Follow rules and regulations set forth by hospitals and
health care facilities. Do not use your device where
prohibited.
Some wireless devices may affect the performance of
hearing aids or pacemakers. Consult your service provider
for more information.
Pacemaker manufacturers recommend that a minimum
distance of 15 cm be maintained between a device and a
pacemaker to prevent potential interference with the
pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device in
your front pocket.
Protecting your hearing when using a headset


To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Using a headset at high volumes may damage your hearing.
To reduce this risk, lower the headset volume to a safe and
comfortable level.
14

Exposure to high volumes while driving may cause
distraction and increase your risk of an accident.
Areas with flammables and explosives


Do not use the device where flammables or explosives are
stored (in a gas station, oil depot, or chemical plant, for
example). Using your device in these environments
increases the risk of explosion or fire. In addition, follow
the instructions indicated in text or symbols.
Do not store or transport the device in containers with
flammable liquids, gases, or explosives.
Traffic security







Observe local laws and regulations while using the device.
To reduce the risk of accidents, do not use your wireless
device while driving.
Concentrate on driving. Your first responsibility is to drive
safely.
Do not hold the device while driving. Use hands-free
accessories.
When you must make or answer a call, pull of the road
safely and park the vehicle first.
RF signals may affect the electronic systems of motor
vehicles. For more information, consult the vehicle
manufacturer.
Do not place the device over the air bag or in the air bag
deployment area in a motor vehicle. Doing so may hurt you
because of the strong force when the air bag inflates.
Do not use your device while flying in an aircraft or
immediately before boarding. Using wireless devices in an
aircraft may disrupt wireless networks, present a hazard to
aircraft operation, or be illegal.
15
Operating environment











Avoid dusty, damp, or dirty environments. Avoid magnetic
fields. Using the device in these environments may result in
circuit malfunctions.
Do not use your device during thunderstorms to protect
your device against any danger caused by lightning.
Ideal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are 0 °C to 35 °C. Extreme heat or
cold may damage your device or accessories.
Do not expose your device to direct sunlight (such as on a
car dashboard) for prolonged periods.
To protect your device or accessories from fire or electrical
shock hazards, avoid rain and moisture.
Keep the device away from sources of heat and fire, such as
a heater, microwave oven, stove, water heater, radiator, or
candle.
Do not place sharp metal objects, such as pins, near the
earpiece or speaker. The earpiece may attract these objects
and result in injury.
Stop using your device or applications for a while if the
device is overheated. If skin is exposed to an overheated
device for an extended period, low temperature burn
symptoms, such as red spots and darker pigmentation, may
occur.
Do not touch the device's antenna. Otherwise,
communication quality may be reduced.
Do not allow children or pets to bite or suck the device or
accessories. Doing so may result in damage or explosion.
Observe local laws and regulations, and respect the privacy
and legal rights of others.
16
Child's safety


Comply with all precautions with regard to child's safety.
Letting children play with the device or its accessories may
be dangerous. The device includes detachable parts that
may present a choking hazard. Keep away from children.
The device and its accessories are not intended for use by
children. Children should only use the device with adult
supervision.
Accessories


Using an unapproved or incompatible power adapter,
charger or battery may cause fire, explosion or other
hazards.
Choose only accessories approved for use with this model
by the device manufacturer. The use of any other types of
accessories may void the warranty, may violate local
regulations and laws, and may be dangerous. Please
contact your retailer for information about the availability
of approved accessories in your area.
Charger safety





For pluggable devices, the socket-outlet shall be installed
near the devices and shall be easily accessible.
Unplug the charger from electrical outlets and the device
when not in use.
Do not drop or cause an impact to the charger.
If the power cable is damaged (for example, the cord is
exposed or broken), or the plug loosens, stop using it at
once. Continued use may lead to electric shocks, short
circuits, or fire.
Do not touch the power cord with wet hands or pull the
power cord to disconnect the charger.
17




Do not touch the device or the charger with wet hands.
Doing so may lead to short circuits, malfunctions, or electric
shocks.
If your charger has been exposed to water, other liquids, or
excessive moisture, take it to an authorized service center
for inspection.
Ensure that the charger meets the requirements of Clause
2.5 in IEC60950-1/EN60950-1 and has been tested and
approved according to national or local standards.
Connect the device only to products with the USB-IF logo
or with USB-IF compliance program completion.
Battery safety





Do not connect battery poles with conductors, such as keys,
jewelry, or other metal materials. Doing so may short-circuit
the battery and cause injuries or burns.
Keep the battery away from excessive heat and direct
sunlight. Do not place it on or in heating devices, such as
microwave ovens, stoves, or radiators. Batteries may
explode if overheated.
Do not attempt to modify or remanufacture the battery,
insert foreign objects into it, or immerse or expose it to
water or other liquids. Doing so may lead to fire, explosion,
or other hazards.
If the battery leaks, ensure that the electrolyte does not
make direct contact with your skins or eyes. If the
electrolyte touches your skins or splashes into your eyes,
immediately flush with clean water and consult a doctor.
In case of battery deformation, color change, or
overheating while charging or storing, immediately stop
using the device and remove the battery. Continued use
may lead to battery leakage, fire, or explosion.
18






Do not put batteries in fire as they may explode. Damaged
batteries may also explode.
Dispose of used batteries in accordance with local
regulations. Improper battery use may lead to fire,
explosion, or other hazards.
Do not allow children or pets to bite or suck the battery.
Doing so may result in damage or explosion.
Do not smash or pierce the battery, or expose it to high
external pressure. Doing so may lead to a short circuit or
overheating.
Do not drop the device or battery. If the device or battery is
dropped, especially on a hard surface, and may be
damaged.
If the device standby time shortens significantly, replace the
battery.
Cleaning and maintenance





Keep the device and accessories dry. Do not attempt to dry
it with an external heat source, such as a microwave oven
or hair dryer.
Do not expose your device or accessories to extreme heat
or cold. These environments may interfere with proper
function and may lead to fire or explosion.
Avoid collision, which may lead to device malfunctions,
overheating, fire, or explosion.
Before you clean or maintain the device, stop using it, stop
all applications, and disconnect all cables connected to it.
Do not use any chemical detergent, powder, or other
chemical agents (such as alcohol and benzene) to clean the
device or accessories. These substances may cause damage
to parts or present a fire hazard. Use a clean, soft, and dry
cloth to clean the device and accessories.
19



Do not place magnetic stripe cards, such as credit cards and
phone cards, near the device for extended periods of time.
Otherwise the magnetic stripe cards may be damaged.
Do not dismantle or remanufacture the device and its
accessories. This voids the warranty and releases the
manufacturer from liability for damage. In case of damage,
contact an authorized service center for assistance or repair.
If the device screen is broken in a collision, immediately
stop using the device. Do not touch or attempt to remove
the broken parts. Promptly contact an authorized service
center.
Emergency calls
The availability of emergency calls is subject to your cellular
network quality, service provider policy, and local laws and
regulations. Never rely solely on your device for critical
communications like medical emergencies.
Environmental protection


The device and its accessories (if included), such as the
power adapter, headset, and battery should not be
disposed of with household garbage.
Disposal of the device and its accessories is subject to local
regulations. Support proper collection and recycling.
EU regulatory conformance
Body worn operation
The device complies with RF specifications when used near
your ear or at a distance of 1.5 cm from your body. Ensure that
the device accessories, such as a device case and device holster,
are not composed of metal components. Keep the device away
from your body to meet the distance requirement.
20
Certification information (SAR)
This device meets guidelines for exposure to radio waves.
Your device is a low-power radio transmitter and receiver. As
recommended by international guidelines, the device is
designed not to exceed the limits for exposure to radio waves.
These guidelines were developed by the International
Commission on Non-Ionizing Radiation Protection (ICNIRP), an
independent scientific organization, and include safety
measures designed to ensure the safety of all users, regardless
of age and health.
The Specific Absorption Rate (SAR) is the unit of measurement
for the amount of radio frequency energy absorbed by the
body when using a device. The SAR value is determined at the
highest certified power level in laboratory conditions, but the
actual SAR level during operation can be well below the value.
This is because the device is designed to use the minimum
power required to reach the network.
The SAR limit adopted by Europe is 2.0 W/kg averaged over 10
grams of tissue, and the highest SAR value for this device
complies with this limit.
The highest SAR value reported for this device type when
tested at the ear is 0.545 W/kg, and when properly worn on
the body is 0.528 W/kg.
Statement
Hereby, Huawei Technologies Co., Ltd. declares that this device
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
For the declaration of conformity, visit the web site
www.huaweidevice.com/certification.
The following marking is included in the product:
This device may be operated in all member states of the EU.
21
Observe national and local regulations where the device is
used.
This device may be restricted for use, depending on the
local network.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used near
your ear or at a distance of 1.0 cm from your body. Ensure
that the device accessories, such as a device case and device
holster, are not composed of metal components. Keep the
device away from your body to meet the distance
requirement.
Certification information (SAR)
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged
over one gram of tissue. The highest SAR value reported to
the FCC for this device type complies with this limit.
The highest SAR value reported to the FCC for this device
type when using at the ear is 0.671 W/kg, and when
properly worn on the body is 1.35 W/kg.
FCC statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to
22
try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Caution: Any changes or modifications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
compliance could void the user's authority to operate the
equipment.
23
All pictures and illustrations in this guide, including
but not Switch between photo and video modes
limited to the phone color, size, and display content,
are for reference only. The actual product may vary.
Nothing in this guide constitutes a warranty of any
kind, express or implied.
Model: HUAWEI Y220-U17
702077_02

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : QSG Cover
Metadata Date                   : 2013:09:11 14:46:48+08:00
Modify Date                     : 2013:09:11 14:46:48+08:00
Create Date                     : 2013:08:28 14:30:44+09:00
Creator Tool                    : Adobe Illustrator CS5.1
Thumbnail Width                 : 256
Thumbnail Height                : 212
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6130 bytes, use -b option to extract)
Instance ID                     : uuid:c28886d4-2aee-4673-9b2e-eec2e7247525
Document ID                     : xmp.did:794FC25CAB0FE31195EEA06A85AA3E0B
Original Document ID            : uuid:5B20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:25bc9064-3240-4337-998c-e738441129aa
Derived From Document ID        : xmp.did:E258CA060EDFE2119ABA9CE066FB9911
Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:E258CA060EDFE2119ABA9CE066FB9911, xmp.iid:794FC25CAB0FE31195EEA06A85AA3E0B
History When                    : 2013:06:27 17:43:31+08:00, 2013:08:28 14:30:42+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CS5.1
History Changed                 : /, /
Startup Profile                 : Basic CMYK
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 64.999306
Max Page Size H                 : 114.998665
Max Page Size Unit              : Millimeters
Font Name                       : FrutigerNextLT-MediumIt, MicrosoftYaHei
Font Family                     : FrutigerNext LT, 微软雅黑
Font Face                       : Medium Italic, Regular
Font Type                       : TrueType, Open Type
Font Version                    : Version 2.02 2003, Version 5.00
Font Composite                  : False, False
Font File Name                  : LT_54374.ttf, MSYH.TTF
Plate Names                     : Black
Swatch Groups Group Name        : 混合颜色组
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=25 M=85 Y=60 K=10
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 25.000000
Swatch Groups Colorants Magenta : 84.999996
Swatch Groups Colorants Yellow  : 60.000002
Swatch Groups Colorants Black   : 10.000002
Producer                        : Adobe PDF library 9.90
Has XFA                         : No
Page Count                      : 25
Creator                         : Adobe Illustrator CS5.1

EXIF Metadata provided by EXIF.tools