Huawei Technologies ZN-U9021 USB WIFI User Manual User s Manual

Huawei Technologies Co.,Ltd USB WIFI User s Manual

user manual

ZN-U9021 User's Manual 第I页ZDC ZN-U9021 User's Manual
ZN-U9021 User's Manual 第II 页Copyright description The company's user manual contains no explicit or implicit guarantees, including the sale or installation of a guarantee for a special purpose. The company has the right to change or amend the manual without notice. Without the written permission of the company, any content of this manual shall be copied. About this manual Use this manual to install and use a wireless access point. This manual includes the configuration process and methods to help customers solve unforeseen problems. In order to highlight some of the need to pay attention to the content, this manual uses the following special characters and styles to express: Warning Said there will be a potential risk operation will cause damage to the device hardware, data loss, equipment can not be normal use and other issues. Be careful To remind you that you have important information to remind you of your use of the equipment. Bold: said there are important steps to set up the function or need your attention. FCC Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following twoconditions: 1) this device may not cause harmful interference, 2) this device must acceptany interference received, including interference that may cause undesired operation.
ZN-U9021 User's Manual 第III 页 FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. —Consult the dealer or an experienced radio/TV technician for help. SAR Statement This Product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is
ZN-U9021 User's Manual 第IV 页1.6 W/kg averaged over one gram of tissue.Device PAU08 (FCC ID: QISZN-U9021) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search.This device was tested for typical operations 5mm from the body. To maintain compliance with FCC RF exposure requirements, 5mm separation distance should . maintained to the user's bodies
ZN-U9021 User's Manual 第I页Catalog Chapter 1 Introduction--------------------------------------------------------------1 Install equipment ---------------------------------------------------------------------5 Access local area network through AP----------------------------------------- 6 PC access and run Chariot --------------------------------------------------------7 The second chapter is the function of the function and the performance specification (the main parts specification, the System Compatibility Specification)--------------------------------------------------------------------------- 9 Third chapter quality and reliability specification ------------------------------13 The fourth chapter is the environmental adaptability specification --------14 The fifth chapter EMC and safety regulation ------------------------------------15 Sixth chapter product life cycle ------------------------------------------------------16 Appendix. National / regional and channel--------------------------------------- 17
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第2页Chapter 1 Introduction to use Install equipment 1、 the ZN-U9021 into the notebook or desktop USB interface; 2、 to ensure that the host is installed 10.04.4 Ubuntu system; 3、 in the system, in order to execute the following commands: 1). Install 2.6.34 kernel $ dpkg -i linux-headers-2.6.34-020634_2.6.34-020634.201502251850_all.deb $ dpkg -i linux-headers-2.6.34-020634-generic_2.6.34-020634.201502251850_i386.deb $ dpkg -i linux-image-2.6.34-020634-generic_2.6.34-020634.201502251850_i386.deb 2). reboot 3). check ubuntu kernel version $ uname -r 2.6.34-020634-generic 4). Install packages show below $ sudo apt-get update $ sudo apt-get install bison $ sudo apt-get install flex $ sudo apt-get install gettext $ sudo apt-get install libncurses-dev $ sudo apt-get install uboot-mkimage $ sudo apt-get install sharutils $ sudo apt-get install build-essential $ sudo apt-get install tftpd $ sudo apt-get install texinfo $ sudo apt-get install tofrodos $ sudo apt-get install telnetd $ sudo apt-get install sysstat $ sudo apt-get install rpm $ sudo apt-get install wget $ sudo apt-get install bzip2 $ sudo apt-get install fakeroot $ sudo apt-get install libncurses5-dev $ sudo apt-get install kernel-package $ sudo apt-get install zlib1g-dev $ sudo apt-get install libnl-dev 5). Enable TCMD, modify "WLAN-AIO/build/scripts/x86/config.x86" export DEF_CONFIG_NL80211_TESTMODE=y 6). Patch driver $ make BOARD_TYPE=x86 drivers_patch 7). Compile driver (root privilege)
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第3页 $ export CONFIG_NL80211_TESTMODE=y $ make BOARD_TYPE=x86 8). Create the folder "/lib/firmware/ath6k/AR6004/hw3.0" and copy bdata.bin, otp.bin, utf.bin to there. 9). Check USB (like 0cf3:9375 Atheros Communications, Inc.) $ lsusb 10). Insert modules $ cd WLAN-AIO/rootfs-x86.build/lib/modules $ insmod ./compat.ko $ insmod ./cfg80211.ko $ insmod ./ath6kl_usb.ko ath6kl_p2p=0 debug_quirks=0x10 11). Run TCMD $ ./athtestcmd -i wlan0 --tx tx99 --txfreq 6 --txchain 1 --txrate 12 --mode ht20 --txpwr 10 12). Stop TCMD $ ./athtestcmd -i wlan0 --tx off Access LAN via AP 1、 in the operating system, into the corresponding folder directory: 2、 LS command to see the folder in the file, and the implementation of the test.sh script file: 3、 when the screen shows the following contents of the command to perform successfully: 4、 Use the iwconfig command to see if the device is connected to the AP:
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第4页 5、 according to the actual need to modify the test.sh file, so that the device associated with different SSID, but also by modifying the wlan0 and eth0 port IP address and iptables configuration device to adapt to different network environment. PC access and run Chariot 1, will be installed with the Chariot software PC access equipment installed PC's cable network; 2. For example, the wlan0 address of the PC port of the device is 192.168.2.200/24, and the address of the eth0 port is 192.168.78.200/24; 3, the PC Chariot cable end to do the following settings: Gateway: 192.168.78.200 4, and PC connected to the wlan0 network card to do the following settings: IP:192.168.2.100/24
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第5页Gateway: 192.168.2.200 5, according to the above method, the two installed Chariot computer can carry on the rate test. The second chapter is the function and performance specifications (the main parts specifications, system compatibility specifications) Product label Product specifications Serial number Project Project description Requirement specification Main parts specifications 1 Network adapter type WIFI
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第6页Serial number Project Project description Requirement specification 2 Outgoing port number 1 3 Outgoing port type Wireless 4 Special specifications 1 Protocol compatible 802.11b/g/n 5 Special specifications 2 WiFi working band is 2.4G, the working channel is 1 to 13, a total of 13 channels. AP mode, when the WiFi is subject to the same frequency interference, support for automatic frequency hopping function. 6 Special specifications 3 Integrated antenna Antenna main direction parallel USB interface direction 7 Special specifications 4 The antenna efficiency is more than 20%, to air 8 Special specifications 5 The antenna VSWR is less than or equal to 4 9 Special specifications 6 Encryption mode: WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) 10 Special specifications 7 The power consumption is less than 1.8W 11 Special specifications 8 Throughput rate: more than 5Mbit/s, @80 meters without shelter tug test, need to put the USB WiFi 3911E in the distance testing machine structure.
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第7页Serial number Project Project description Requirement specification 12 Special specifications 9 Maximum Target Power for Production Unit 802.11b CH1~11: 17.5±1 dBm, CH12: 15±1 dBm,CH13: 13±1 dBm 802.11g CH1~11: 16±1 dBm,CH12: 13±1 dBm, CH13: 11±1 dBm 802.11n-HT20 CH1~11: 15±1 dBm, CH12: 13±1 dBm, CH13: 11±1 dBm 13 Special specifications 8 Receiving sensitivity: (Reference) 11b_1Mbps:-83dBm 11b_11Mbps:-76dBm 11g_6Mbps:-82dBm 11g_54Mbps:-65dBm 11n_HT20_MCS0:-82dBm 11n_HT20_MCS7:-64dBm
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第8页Serial number Project Project description Requirement specification 14 Special specifications 9 Transmit spurious requirements: (WiFi antenna, conducting spurious test) ≤ -36dBm/MHz ，@9KHz~700MHz； ≤ -97dBm/MHz ，@700~1000MHz； ≤ -88dBm/MHz ，@1000~1710MHz； ≤ -97dBm/MHz ，@1710~2370MHz； ≤ -97dBm/MHz ，@2500~2690MHz； ≤ -88dBm/MHz ，@2690~3400MHz； ≤ -97dBm/MHz ，@3400~3800MHz； ≤ -36dBm/MHz ，@3.8~12.75GHz；
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第9页Serial number Project Project description Requirement specification 15 Special specifications 10 Transmit spurious requirements: (WiFi antenna, conducting spurious test) ≤-36dBm/MHz，@9KHz~700MHz； ≤ -97dBm/MHz ，@700~1000MHz； ≤ -88dBm/MHz ，@1000~1710MHz； ≤ -97dBm/MHz ，@1710~2370MHz； ≤ -97dBm/MHz ，@2500~2690MHz； ≤ -88dBm/MHz ，@2690~3400MHz； ≤ -97dBm/MHz ，@3400~3800MHz； ≤ -36dBm/MHz ，@3.8~12.75GHz； 16 Special specifications 11 Support AP mode 17 Special specifications 12 Easy to plug in narrow space 18 Optical module Same encoding under different module driver to maintain the same 19 Physical size No light module
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第10 页Serial number Project Project description Requirement specification 20 Physical interface No light module Length: 40mm Width: 19mm High: less than 7mm Note: the above dimensions are included in the tolerance, and the USB connector is in the middle of the module. 21 Machine shell 1, USB 2 standard interface 2, the shape and size of the detailed requirements in the attachment: 《ZN-U9021.pdf》 22 Operating system The outer plastic shell is required for easy operation. 23 Drive Linux 24 Drive Provides direct compiled source code to HUAWEI, can be directly compiled to the Linux system.
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第11 页Second chapter quality and reliability specifications Serial number Project Project description Requirement specification 1 Device failure rate (FIT) Required maximum device failure rate 100fit 2 Other Consider the need to specify the indicators. Life 8 years 环The third chapter is the environmental adaptability specification The third chapter is the environmental adaptability specification The third chapter is the environmental adaptability specification
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第12 页The third chapter is the environmental adaptability specification Serial number Project Project description Requirement specification 1 Operating temperature range -20 C ~ +70, note: this temperature range to ensure that the performance indicators meet the specifications. This temperature refers to the WiFi USB single plate temperature. 2 Temperature cycling 1 for /min, 2 for 3h, and for the extreme value 3 Storage temperature range -40～+90℃ 4 Working humidity range 10%～90% 5 Are required to meet the ROHS instruction Refers to the material does not contain lead, mercury, cadmium, six valence chromium, more than 6 kinds of toxic substances, such as, poly methyl bromide, two kinds of toxic substances or to meet the requirements of the ROHS directive. Need to meet
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第13 页Chapter 1 The second chapter EMC and safety regulations Serial number Project Project description Requirement specification1 Specifications IEC specifications / UL specifications / other Complete CE certification, provide certification report 2 Test report Provided by the formal authority of the test room, preferably third party test report, including the corresponding standard requirements of all test items Provide CE certification report 3 Reliability test Reliability test report for -40~85
ZN-U9021 User's Manual 错误！未找到引用源。 错误！未找到引用源。 第14 页Fourth chapter product life cycle Serial number Project Project description Requirement specification 1 Product life cycle requirements 5 years or more Over 5 years Accessory： 1、 the overall shape and size of the following requirements are as follows:
ZN-U9021 User's Manual 错误！未找到引用源。 第15 页Appendix. National / regional and channel Table 6 national / regional frequency division list Country / Region 2.4G Band Australia 1-13 Austria 1-13 Canada 1-11 China 1-13 Denmark 1-13 Finland 1-13 France 1-13 Germany 1-13 Hongkong 1-13 Iceland 1-13 Ireland 1-13 Italy 1-13 Japan 11g: 1-13 / 11b: 1-14 Liechtenstein 1-13 Luxemburg 1-13 Holland 1-13 New Zealand 1-13 Norway 1-13 Portugal 1-13 Singapore 1-13 Spain 1-13 Sweden 1-13 Switzerland 1-13 Taiwan 1-13 Britain 1-13 U.S.A 1-13

Navigation menu