Huawei 目录 (Contents) ME936 LTE M.2 Module Acceptance Inspection Guide (V100R001 02, English)
HUAWEI ME936 LTE M.2 Module Acceptance Inspection Guide-(V100R001_02, English)
2014-07-03
使用手册: Huawei
Open the PDF directly: View PDF
Page Count: 12
- Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
- Trademarks and Permissions
- Notice
- DISCLAIMER
- Import and Export Regulations
- Privacy Policy
- Revision History
- 1 Introduction
- 2 Acceptance Inspection
- 2.1 Packaging Modes and Appearance
- 2.2 Label Inspection
- 2.3 Performance Inspection
- Step 1 Plug the module onto the development kit, and then use the USB cable to connect the development kit to the PC.
- Step 2 Enter Program Manager as shown in the following figure.
- Step 3 Click Settings on the charm bar as shown in the following figure.
- Step 4 Click Change PC settings in Settings as shown in the following figure.
- Step 5 Click Network in PC settings as shown in the following figure.
- Step 6 Click Unnamed in Network as shown in the following figure.
- Step 7 The information will be displayed in the following figure, in which, the firmware version and the IMEI number are shown in the red boxes.
- 2.4 Repack the Module after Inspection