Huf Baolong Electronics Bretten TSSRE4TB Tire Safety System / Wheel Electronic Transmitter User Manual 35300010020027 UserManual TSS G2 BMW

Download:
Mirror Download [FCC.gov]
Document ID	593757
Application ID	Qp7n3ERlN5rarfvM2duXaA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.64kB (70446 bits)
Date Submitted	2005-10-20 00:00:00
Date Available	2005-10-20 00:00:00
Creation Date	2005-09-09 08:20:55
Producing Software	AFPL Ghostscript 8.14
Document Lastmod	2005-09-09 09:29:54
Document Title	35300010020027 _UserManual TSS G2 BMW_
Document Creator	FreePDF XP 1.0 - http://shbox.de
Document Author:	saric

TSS 2. Generation BMW
Tire Safety System TSS 2nd. Generation, BMW
Bedienungsanleitung TSS BMW
User Manual TSS BMW
Dept. BEE
Änderungsstand:
Status of
modification:
Dokument Nr.:
Document no.:
3530.001.002.00.27
00
Index:
Index:
freigegeben am /date of release 8/31/05
Titel:
Bedienungsanleitung TSS BMW
Title:
User Manual TSS BMW
Dokument Nr.: 3530.001.002.00.27
Document no:
Projekt:
TSS 2. Generation BMW
Project:
Tire Safety System TSS 2nd. Generation, BMW
Current status:
Index:
Index:
Änd.stand:
Status of
modification:
Description:
Description
Erstellt / Datum:
Prepared / date:
Geprüft / Datum:
Checked / date:
Freigegeben /
Datum:
Released / date:
00
First version
Saric/
8/26/05
Birringer/
8/26/05
Saric/
8/31/05
Erstellt / Datum:
Prepared / date:
Geprüft / Datum:
Checked / date:
Freigegeben /
Datum:
Released / date:
Revision service
Index:
Index:
Änd.stand:
Status of
modification:
Description:
Description
00
First version
TSS 2. Generation BMW
Tire Safety System TSS 2nd. Generation, BMW
Bedienungsanleitung TSS BMW
User Manual TSS BMW
Dept. BEE
Dokument Nr.:
Document no.:
3530.001.002.00.27
Änderungsstand:
Status of
modification:
Index:
Index:
00
freigegeben am /date of release 8/31/05
Section 15.19: Labelling requirements
This device complies with Part15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause undesired
operation.
Section 15.21: Information to the user
The user manual or instruction manual for an intentional or unintentional radiator shall caution
the user that changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
IC statement according to RSS210
5.11 User Manual
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of
the device
TSS 2. Generation BMW
Tire Safety System TSS 2nd. Generation, BMW
Bedienungsanleitung TSS BMW
User Manual TSS BMW
Dept. BEE
Dokument Nr.:
Document no.:
3530.001.002.00.27
Änderungsstand:
Status of
modification:
00
Index:
Index:
freigegeben am /date of release 8/31/05
Contents:
SYSTEM AND FUNCTIONAL DESCRIPTION .................................................................................................4
1.1
SYSTEM DESCRIPTION.................................................................................................................................................4
FUNCTIONAL DESCRIPTION ............................................................................................................................5
WARNING ALGORITHM.....................................................................................................................................7
3.1
3.2
WARNING LIMIT “MINIMUM PRESSURE” .....................................................................................................................7
WARNING LIMIT “NOMINAL PRESSURE MINUS RELATIVE DEVIATION” (NOMINAL PRESSURE – X %) ...........................7
TSS 2. Generation BMW
Tire Safety System TSS 2nd. Generation, BMW
Bedienungsanleitung TSS BMW
User Manual TSS BMW
Dept. BEE
Dokument Nr.:
Document no.:
3530.001.002.00.27
Änderungsstand:
Status of
modification:
00
Index:
Index:
freigegeben am /date of release 8/31/05
1 System and functional description
1.1
System Description
The Tire Safety System (TSS) controls and monitors tire pressures.
The system comprises the following components:
1 TSS control unit
4 sets of wheel electronics including valve
1 digital antenna
4 trigger transmitters
The wheel electronics mounted inside the tire measures tire pressure and temperature at regular intervals and
transfers the values telemetrically via a HF transmission line to a reception antenna. The current pressure and
temperature values can be requested specifically via the trigger function. In the receiver antenna, the radio data
telegram is decoded and transferred to the control unit as a digital signal. The control unit evaluates the received
data and forwards the information to the driver as required. This provides the driver with information on the necessary tire pressure or tire tension adjustments.
The benefits offered by the tire pressure control system are:
•
Safety
An early warning in case of fast pressure loss is given.
"Blow-outs" caused by excessive flexing and driving too fast on inadequate tire pressure are avoided.
The driver is prompted to adjust the tire pressure where necessary.
•
Comfort
Tire handing is made simple. Using the filling equipment at the fuel station and removing the valve cap is
only necessary for correcting the tire pressure.
•
New tire developments
Tires with limp-home features avoid having to change a wheel immediately and render the spare wheel
superfluous. They do, however, require permanent monitoring of the tire pressure.
•
Service life and economy
Tire wear is minimized through correct air pressure.
TSS 2. Generation BMW
Tire Safety System TSS 2nd. Generation, BMW
Bedienungsanleitung TSS BMW
User Manual TSS BMW
Dept. BEE
Dokument Nr.:
Document no.:
3530.001.002.00.27
Änderungsstand:
Status of
modification:
Index:
Index:
00
freigegeben am /date of release 8/31/05
2 Functional description
The wheel electronics are mounted within the tires and measure tire pressure, temperature and wheel electronics. The measured data is sent from the wheel via a send stage in the wheel electronics. A system with relatively
seldom measured data transfer is adequate for tire pressure monitoring provided it features the additional option
of detecting sudden pressure loss. This enables the electronics in the wheel to be designed for minimum power
draw and battery operation.
All wheel electronics have their own code (ID) that is forwarded with the data at each transfer. The HF transfer
occurs in the 433 MHz range, referred to as the ISM range. The trigger functionality is achieved by a 125kHz LF
channel.
The control unit calls up the wheel electronics via the trigger transmitters every 54 s to send data messages.
Tire pressure and wheel electronics temperature are also measured every 3 seconds. When a pressure loss
> 0.2 bar on the last sent pressure value is detected, the wheel electronics switch immediately to fast-send
mode. In this situation, the wheel electronics measure and send every 0.8 seconds.
The TSS measures and transfers considerably more data than is necessary to ensure reliable basic function. It
can therefore use a data transfer path that is not assigned for the error-free transfer of each individual data protocol. Using the trigger function, an implausible and/or non-received data message can be requested again from
the corresponding wheel electronics.
The data sent by the wheel electronics is received via the digital antenna and is decoded. The decoded data is
transferred onwards to the control unit via a digital interface (LIN interface).
The control unit evaluates the received data and forwards the information to the driver information system as
required. This provides the driver with information on the necessary tire pressure or tire tension adjustments.
The main functional characteristics of the control unit are:
- A central warning algorithm and an algorithm for the wheel manager
- The vehicle-specific connection for the power supply system and manufacturer-specific operation and
display philosophy
The essential feature of wheel management is the self-learning system with automatic individual wheel detection
and the detection of the corresponding installed positions (wheel position detection).
Thanks to fast triggering of the wheel electronics when T 15 is ON, the system detects a flat tire well before the
start of a journey.
TSS 2. Generation BMW
Tire Safety System TSS 2nd. Generation, BMW
Bedienungsanleitung TSS BMW
User Manual TSS BMW
Dept. BEE
Dokument Nr.:
Document no.:
3530.001.002.00.27
Änderungsstand:
Status of
modification:
00
Index:
Index:
freigegeben am /date of release 8/31/05
CAN bus
TSS-LIN bus
For Driver
Information
System
TSS
control unit
CAN
Interface
TSS-LIN
Interface
Trigger 1
WE 1
Trigger 2
WE 2
Trigger 3
WE 3
Trigger4
WE 4
Antenna
TSS-LIN
Interface
HF receiver
Function
software
Function
software
Figure 1: Block diagram, TSS system of the second generation
TSS 2. Generation BMW
Tire Safety System TSS 2nd. Generation, BMW
Bedienungsanleitung TSS BMW
User Manual TSS BMW
Dept. BEE
Dokument Nr.:
Document no.:
3530.001.002.00.27
Änderungsstand:
Status of
modification:
00
Index:
Index:
freigegeben am /date of release 8/31/05
3 Warning algorithm
The system monitors a nominal pressure, which is set by the operator, and a fixed set minimum warning pressure. The higher value in each case is used to generate the breakdown warning.
The driver instructs the system to accept the current pressure values as the nominal pressure by using the
“Reset”. The reset is triggered by pressing a key or selecting a menu item.
3.1
Warning limit “Minimum pressure”
At this warning limit, a check is made against the minimum warning pressure PWarning_MinimumPressure, which is programmed into the system as a fixed value.
The minimum warning pressure for BMW amounts to 2.6bar abs plus an accuracy reserve of 0.1bar.
The corresponding warning bit is set, if the measured pressure lies below this threshold twice in succession.
3.2
Warning limit “Nominal pressure minus relative deviation”
(Nominal pressure – x %)
This warning limit is calculated from the nominal pressure less a relative deviation of 25% of the nominal pressure. The nominal pressure is specified by the driver.
Again here an accuracy reserve of 0.1 bar is added to the warning limit.
The corresponding warning bit is set, if the measured pressure lies below this threshold twice in succession.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2005:09:09 08:20:55Z
Creator Tool                    : FreePDF XP 1.0 - http://shbox.de
Modify Date                     : 2005:09:09 09:29:54+02:00
Metadata Date                   : 2005:09:09 09:29:54+02:00
Format                          : application/pdf
Creator                         : saric
Title                           : 35300010020027 _UserManual TSS G2 BMW_
Producer                        : AFPL Ghostscript 8.14
Document ID                     : uuid:12b75cce-a928-4489-87cf-8512201522da
Instance ID                     : uuid:f8c74d90-fa1d-4da4-87d5-e89965eb98e2
Page Count                      : 7
Author                          : saric

EXIF Metadata provided by EXIF.tools