Huin Tech TP-140B 2.4GHz Touch Pointer User Manual
Huin Tech 2.4GHz Touch Pointer
User manual
SPECIFICATIONS
Model : TP-140B
Manufacture : Huintech
Country of origin : Republic of Korea
Size : Touch Pointer 108mm X 43mm X 13mm
USB Receiver 26.6mm X 16.1mm X6.3mm
Battery : Li-Polymer 680mA
RF Frequency : 2.4GHz
RF Distance : <20m (<65feet)
Feature : Touch & Click
Working Mode ▪Mouse
▪Presenter
▪Multimedia Control
▪Virtual Keyboard (Software support)
OS Support : Windows-XP, Vista, 7 [32/64-bit]
Mac OS X
Touch-Pointer
COMPONENTRY
USB Receiver USB A-A Cable
(for Recharge)
TP-140B
User Manual
User Manual
1. Install Application Software
download at
www.huintech.com/download
How to …
USB Port
2. Insert the USB Receiver into PC
3. Power On “Touch-pointer”
and… Try it !
▪Recharging… : LED ON
▪Recharge done : LED OFF
BATTERY RECHARGE
USB Port
NOTES : PLEASE USE APPROVED RECHARGING A to A USB ONLY.
C
B
A
POWER
OFF
C
B
A
POWER
ON
C
B
A
MODE
CHANGE
C
B
A
Mouse
Presentation
Multi Media
Selected ICON is Flicking
POWER & MODE Switch
LCD Feature
BATTERY STATUS
GESTURE STATUS
Empty ~25% ~50% ~70% ~100%
No-Touch Soft-Touch Deep-Touch Move/Drag V-Scroll H-Scroll
Pre-Page Next-Page UP-Arrow Down-Arrow Left-Arrow Right-Arrow
UP DOWN LEFT RIGHT Zoom Rotate
WORKING MODE
MOUSE PRESENTATION MULTIMEDIA
Mouse
Touch Area
Key Feature-1 : MOUSE
“Esc” Key
Virtual Keyboard
Key [QWERTY]
“Alt+F4” Key
MACRO KEY-1
(User define)
Default :
MACRO KEY-2
(User define)
Default : Enter
Alt+Tab or
Windows+Tab
Right Click Area
Key Feature-2 : PRESENTATION
“Esc” Key
Virtual Keyboard
Key [NUMERIC]
“Alt+F4” Key
Show Start
“F5” Black/White
“B” or “W”
Alt+Tab or
Windows+Tab
Next PagePre Page
Key Feature-3 : MULTIMEDIA CONTROL
“Esc” Key
Virtual Keyboard
Key [ARROW]
“Alt+F4” Key
MACRO KEY-1 MACRO KEY-2
Alt+Tab or
Windows+Tab
VOLUME
MUTE
PLAY/PAUSE
RF FF
Thumb Gesture : Soft Touch / Deep Touch
Deep Touch
Soft Touch
SOFT_TOUCH
ICON DEEP_TOUCH
ICON
Soft Touch and Deep Touch is selected according to the size of touch area.
▪Soft Touch : Mouse Pointing, L/R Click of mouse。
▪Deep Touch : Gesture fuction(Scroll, page moving etc.)
To change into Soft Touch Mode from Deep Touch Mode easily, move some distance
without any click. (When LCD screen and dedicated software is installed, you can see
the icon on the PC monitor.)
* Deep Touch : Touch widely
Thumb Gesture : CLICK
Red area(Right area)
: Click the right area.
CLICK
Blue area(Left area)
: Touch(Soft Touch) the left area
and click it at the same time.
CLICK DOUBLE
CLICK
Thumb Gesture : MOVE/DRAG
Click ONClick OFF Click OFFClick ON Latch
> 1.2Sec
No Touch
MOVE/DRAG MODE
1. Touch(Soft Touch) the panel area and keep touching about 1.2 seconds. Then, the panel
is converted to CLICK ON Mode.
2. On MOVE/DRAG Mode, the mouse icon and LCD screen is changed into MOVE/DRAG icon.
Thumb Gesture : Vertical SCROLL
DEEP_TOUCH
1. Touch(Deep Touch) the central area of touch panel and click it. Then it will be converted
into Vertical Scroll Mode and Vertical Scroll icon appears on the LCD screen. (If you install
the dedicated software, mouse pointer will be changed into Vertical Scroll icon.)
2. On Vertical Scroll Mode, If you take off the thumb from the penal and re-touch the panel
about 0.4 seconds, Vertical Scroll Mode will be maintained. On Scroll Mode, you may use
Soft Touch instead of Deep touch.
3. Turn Off Vertical Scroll Mode : - Take off the thumb from the panel about 0.8 seconds
- Touch the same area repeatedly and take off the thumb.
Vertical Scroll モードに進入した場合には、タッチパネルから手を離しても約 0.4秒間
Scroll 機能が維持され、次のタッチからは、触れる面積と無関係に Deep Touchに遂行される。
タッチ面積を中央に上端と下端をクリックする場合、 1-STEP Scroll 機能が実行される。
タッチが連続的に 0.4秒以上ない場合や同じ領域を二度以上タッチした場合には、 Scroll
機能が解除される。
+
CLICK V_SCROLL
CLICK
(1-STEP
Control) < 0.4sec
Thumb Gesture : Next Page
DEEP_TOUCH
How to :
1. Touch(Deep Touch) the left area of touch panel and push the click button at the
same time. Then, slide the panel screen from left area to right area smoothly.
2. Take off the thumb from panel.
+
CLICK NEXT-PAGE
(LEFT AREA)
SWIPE
Thumb Gesture : Pre Page
DEEP_TOUCH
How to :
1. Touch(Deep Touch) the right area of touch panel and push the click button
at the same time. Then, slide the panel screen from right area to left area
smoothly.
2. Take off the thumb from panel.
+
CLICK PRE-PAGE
(RIGHT AREA)
SWIPE
Mouse Right-Click
Application Software
Install Application Software
Application Software : Macro Key Setup
Virtual Keyboard : Qwerty @Mouse Mode
Click
Virtual Keyboard : Numeric @Presentation Mode
Click
Page Jump
FCC ID: ZXETP-140B
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to The following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's
authority to operate the equipment.
RF Exposure Statement (2.1091)
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Part 15.105 (B)
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules.