Huizhou Artsun DX502A03 GRAVITY PHONE HOLDER & WIRELESS CHARGER 2-IN-1 KIT User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3956790
Application ID	5XEK3kaY4NXeisekmaU3dQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	228.98kB (2862190 bits)
Date Submitted	2018-08-08 00:00:00
Date Available	2018-08-28 00:00:00
Creation Date	2018-07-31 19:29:06
Producing Software	Adobe Acrobat 11.0 Image Conversion Plug-in
Document Lastmod	2018-07-31 19:29:15
Document Title	Users Manual
Document Creator	Adobe Acrobat 11.0

GRAVITY PHONE HOLDER
& WIRELESS CHARGER
USER'S MANUAL
zeta in t7
WERSIONtQA
GETTING STARTED
For optimal mounting and charging. please follow the detailed
instruction within this manual when using the Ql Wireless Fast
Charging Dash 5. windshield Mount is not liable for possible
damages due to product misuse
Critical Information
Compatibility
Before using product, make sure your device is Ql Wireless
compatible. Compatible devices include Samsung Galaxy: 58,
SB Plus, Note 8, or iPhone X, S, 8 Plus, and other Qi enabled
smartphones Please note that not all smartphories can
receive a wireless Fast Charge, however they will still receive
a standard wireless charge Check your phone's charging
features for Fast Charge capabilities.
Qi Fast Charging in Vehicle
ltyou do use a third party car charger, use a Qualcomm Quick
Charge 2 0 or equivalent adapter to receive Fast Charge (with
compatible devices)
This Wireless Charging mounl's Signal could possibly interfere
with your TPMS (tire pressure monitoring system) it you
notice that your TPMS light turns on, please try to use your
mount in different locations to avoid the signals from
interacting
Qi Fast Charging on Desk
Use a USB Power Adapter with a minimum output of both
"a 0Vr1.67A or 5.0V72.0A". Plug directly into wall or surge
protector. Inserting into laptop or computer will not provide
adequate power,
EXFLORING
INSIDE
i Qt Fast Charging Coil
Charging indicator rrrrr 55mm,
AirVents, Cradle knob
Locking side Arms , . , Telescopic Knob
Telescopic Arm
Pivot Knob
Lever
F t . . . .
°° SdC|iCrtCttp
Release Bars
391an
Micro USB Port
. Gravity Auto Clamp/Lock with OneaTouch Release
. Bulltrln Qi wireless Charging Technology
- Model vcwesozk
. input 5V/2A ewt 67A
. Baseline Power Profile: 5w
. QC Support: 002 o
. Compatible QI Version: 1.2.4
. FCC ID 2ALU4DX502A03
KEY FEATURES
0 One-handed Operation 9 Auto Clamping and Locking
9 One Touch to Release 0 Take out the Smanphcne
CHARGING INDICATOR
Your device‘s screen will show
that it is charging ,
Poweraon red lamp flickered,
blue lamp flickered, red and blue
lamps flickered simultaneously
Standby red and blue lamps are
lights out.
Full charge: red and blue lamps
lighting together (requires the
support from the receiving end).
Fault indication status:
FOD: red and blue lamps flicker alternately.
input voltage i coil voltage overvoltage: red and blue lamps
flicker alternately
Overtemperature: red lamp flickers,
Ps: indicator status can be customized according to
Customer‘s requirements
Qi Wireless Fast
Charging
Charge up to 40% faster
than standard wireless
charging
ASSEMBLING MOUNT
9 Remove Cradle knob irom back
otCradle and place over ball ioint
into the Mount Base
9 Tighten Cradle knob
Loosen the telescopic knob to o Loosen the side knob to pivot the
extend the anii.ahd tighten to view angle and tighten to secure
secure distance position
Suction cup base provides a strong secure hold on dash‘s, Windshield,
desks, tables and othersuriaces,
DECLARATION OF CONFORMITY (FCC)
This device complies with Part 18 oithe FCC Rules.
CAUTION: Changes or modifications not expressly approved
by the party responsible for compliance could void the user‘s
authority to operate the product
NOTE: This equipment has been tested and found to comply
with the limits for a wireless power charger, pursuant to Pan
18 of the FCC Rules These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, it not installed and
used in accordance with the instructions, may cause harmful
interierence to radio communications. However. there is no
guarantee that interierence will not occur in a panicular
installation if this equipment does cause harmful interierence
to radio or television reception. which can be determined by
turning the equipment oil and on, the user is encouraged to try
to correct the interierence by one or more orthe following
measures:
a Reorlent or relocate the recelvlrlg antenna,
- increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit difierent
from that to which the receiver is connected.
. Consult the dealer or an expenenoed radio/TV technician for
help.
OPERATION WARNINGS
l) During the charging process. the transter of electricity gives
oft heat Your device may become warm, but should not
become exceedingly hot.
2) if the device gets wet please cease charging immediately
Remove all plugs and dry the product completely Device is
only to be operated in a dry indoor environment
3) Please be careful of excessive drops, dents, punctures , or
deformities on the device if you are concerned, please
unplug the device and contact the manufacturer,
4) Changes or modifications not expressly approved by the
pany responsible for compliance could void the user's
authority to operate the equipment ,
5) Operating this device in a hot environment or in direct
sunlight for a long period of time may cause maiiunctions, We
recommend keeping the product in cooler temperatures.
6) Please use included components for an optimal experience
To support Qi last charge when using a third party car charger
or a USB PowerAdapter use a minimum output of both "9 DV-
1 67A or 5 live 0A"
7) The product‘s signal could possibly interfere With you
TPMS (tire pressure monitoring system) ltyou notice that your
TPMS light turns on, please try using your mount in different
locations to avoid the signals from interfering With each other,

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2018:07:31 19:29:06+08:00
Creator                         : Adobe Acrobat 11.0
Modify Date                     : 2018:07:31 19:29:15+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:07:31 19:29:15+08:00
Creator Tool                    : Adobe Acrobat 11.0
Format                          : application/pdf
Document ID                     : uuid:edeeea42-b7a5-4ad9-853f-55110ae1913d
Instance ID                     : uuid:b8b62320-971a-4426-b83f-1e83c3626eb2
Producer                        : Adobe Acrobat 11.0 Image Conversion Plug-in
Page Count                      : 1

EXIF Metadata provided by EXIF.tools